xref: /openbmc/linux/drivers/gpu/drm/bridge/ti-tfp410.c (revision 496091fa)
1 /*
2  * Copyright (C) 2016 Texas Instruments
3  * Author: Jyri Sarha <jsarha@ti.com>
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of the GNU General Public License version 2 as published by
7  * the Free Software Foundation.
8  *
9  */
10 
11 #include <linux/delay.h>
12 #include <linux/fwnode.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/i2c.h>
15 #include <linux/irq.h>
16 #include <linux/module.h>
17 #include <linux/of_graph.h>
18 #include <linux/platform_device.h>
19 
20 #include <drm/drm_atomic_helper.h>
21 #include <drm/drm_crtc.h>
22 #include <drm/drm_print.h>
23 #include <drm/drm_probe_helper.h>
24 
25 #define HOTPLUG_DEBOUNCE_MS		1100
26 
27 struct tfp410 {
28 	struct drm_bridge	bridge;
29 	struct drm_connector	connector;
30 	unsigned int		connector_type;
31 
32 	u32			bus_format;
33 	struct i2c_adapter	*ddc;
34 	struct gpio_desc	*hpd;
35 	int			hpd_irq;
36 	struct delayed_work	hpd_work;
37 	struct gpio_desc	*powerdown;
38 
39 	struct drm_bridge_timings timings;
40 
41 	struct device *dev;
42 };
43 
44 static inline struct tfp410 *
45 drm_bridge_to_tfp410(struct drm_bridge *bridge)
46 {
47 	return container_of(bridge, struct tfp410, bridge);
48 }
49 
50 static inline struct tfp410 *
51 drm_connector_to_tfp410(struct drm_connector *connector)
52 {
53 	return container_of(connector, struct tfp410, connector);
54 }
55 
56 static int tfp410_get_modes(struct drm_connector *connector)
57 {
58 	struct tfp410 *dvi = drm_connector_to_tfp410(connector);
59 	struct edid *edid;
60 	int ret;
61 
62 	if (!dvi->ddc)
63 		goto fallback;
64 
65 	edid = drm_get_edid(connector, dvi->ddc);
66 	if (!edid) {
67 		DRM_INFO("EDID read failed. Fallback to standard modes\n");
68 		goto fallback;
69 	}
70 
71 	drm_connector_update_edid_property(connector, edid);
72 
73 	return drm_add_edid_modes(connector, edid);
74 fallback:
75 	/* No EDID, fallback on the XGA standard modes */
76 	ret = drm_add_modes_noedid(connector, 1920, 1200);
77 
78 	/* And prefer a mode pretty much anything can handle */
79 	drm_set_preferred_mode(connector, 1024, 768);
80 
81 	return ret;
82 }
83 
84 static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = {
85 	.get_modes	= tfp410_get_modes,
86 };
87 
88 static enum drm_connector_status
89 tfp410_connector_detect(struct drm_connector *connector, bool force)
90 {
91 	struct tfp410 *dvi = drm_connector_to_tfp410(connector);
92 
93 	if (dvi->hpd) {
94 		if (gpiod_get_value_cansleep(dvi->hpd))
95 			return connector_status_connected;
96 		else
97 			return connector_status_disconnected;
98 	}
99 
100 	if (dvi->ddc) {
101 		if (drm_probe_ddc(dvi->ddc))
102 			return connector_status_connected;
103 		else
104 			return connector_status_disconnected;
105 	}
106 
107 	return connector_status_unknown;
108 }
109 
110 static const struct drm_connector_funcs tfp410_con_funcs = {
111 	.detect			= tfp410_connector_detect,
112 	.fill_modes		= drm_helper_probe_single_connector_modes,
113 	.destroy		= drm_connector_cleanup,
114 	.reset			= drm_atomic_helper_connector_reset,
115 	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
116 	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
117 };
118 
119 static int tfp410_attach(struct drm_bridge *bridge)
120 {
121 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
122 	int ret;
123 
124 	if (!bridge->encoder) {
125 		dev_err(dvi->dev, "Missing encoder\n");
126 		return -ENODEV;
127 	}
128 
129 	if (dvi->hpd_irq >= 0)
130 		dvi->connector.polled = DRM_CONNECTOR_POLL_HPD;
131 	else
132 		dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
133 
134 	drm_connector_helper_add(&dvi->connector,
135 				 &tfp410_con_helper_funcs);
136 	ret = drm_connector_init(bridge->dev, &dvi->connector,
137 				 &tfp410_con_funcs, dvi->connector_type);
138 	if (ret) {
139 		dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret);
140 		return ret;
141 	}
142 
143 	drm_display_info_set_bus_formats(&dvi->connector.display_info,
144 					 &dvi->bus_format, 1);
145 
146 	drm_connector_attach_encoder(&dvi->connector,
147 					  bridge->encoder);
148 
149 	return 0;
150 }
151 
152 static void tfp410_enable(struct drm_bridge *bridge)
153 {
154 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
155 
156 	gpiod_set_value_cansleep(dvi->powerdown, 0);
157 }
158 
159 static void tfp410_disable(struct drm_bridge *bridge)
160 {
161 	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
162 
163 	gpiod_set_value_cansleep(dvi->powerdown, 1);
164 }
165 
166 static const struct drm_bridge_funcs tfp410_bridge_funcs = {
167 	.attach		= tfp410_attach,
168 	.enable		= tfp410_enable,
169 	.disable	= tfp410_disable,
170 };
171 
172 static void tfp410_hpd_work_func(struct work_struct *work)
173 {
174 	struct tfp410 *dvi;
175 
176 	dvi = container_of(work, struct tfp410, hpd_work.work);
177 
178 	if (dvi->bridge.dev)
179 		drm_helper_hpd_irq_event(dvi->bridge.dev);
180 }
181 
182 static irqreturn_t tfp410_hpd_irq_thread(int irq, void *arg)
183 {
184 	struct tfp410 *dvi = arg;
185 
186 	mod_delayed_work(system_wq, &dvi->hpd_work,
187 			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
188 
189 	return IRQ_HANDLED;
190 }
191 
192 static const struct drm_bridge_timings tfp410_default_timings = {
193 	.input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
194 			 | DRM_BUS_FLAG_DE_HIGH,
195 	.setup_time_ps = 1200,
196 	.hold_time_ps = 1300,
197 };
198 
199 static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
200 {
201 	struct drm_bridge_timings *timings = &dvi->timings;
202 	struct device_node *ep;
203 	u32 pclk_sample = 0;
204 	u32 bus_width = 24;
205 	s32 deskew = 0;
206 
207 	/* Start with defaults. */
208 	*timings = tfp410_default_timings;
209 
210 	if (i2c)
211 		/*
212 		 * In I2C mode timings are configured through the I2C interface.
213 		 * As the driver doesn't support I2C configuration yet, we just
214 		 * go with the defaults (BSEL=1, DSEL=1, DKEN=0, EDGE=1).
215 		 */
216 		return 0;
217 
218 	/*
219 	 * In non-I2C mode, timings are configured through the BSEL, DSEL, DKEN
220 	 * and EDGE pins. They are specified in DT through endpoint properties
221 	 * and vendor-specific properties.
222 	 */
223 	ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0);
224 	if (!ep)
225 		return -EINVAL;
226 
227 	/* Get the sampling edge from the endpoint. */
228 	of_property_read_u32(ep, "pclk-sample", &pclk_sample);
229 	of_property_read_u32(ep, "bus-width", &bus_width);
230 	of_node_put(ep);
231 
232 	timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
233 
234 	switch (pclk_sample) {
235 	case 0:
236 		timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
237 					 |  DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
238 		break;
239 	case 1:
240 		timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
241 					 |  DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
242 		break;
243 	default:
244 		return -EINVAL;
245 	}
246 
247 	switch (bus_width) {
248 	case 12:
249 		dvi->bus_format = MEDIA_BUS_FMT_RGB888_2X12_LE;
250 		break;
251 	case 24:
252 		dvi->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
253 		break;
254 	default:
255 		return -EINVAL;
256 	}
257 
258 	/* Get the setup and hold time from vendor-specific properties. */
259 	of_property_read_u32(dvi->dev->of_node, "ti,deskew", (u32 *)&deskew);
260 	if (deskew < -4 || deskew > 3)
261 		return -EINVAL;
262 
263 	timings->setup_time_ps = min(0, 1200 - 350 * deskew);
264 	timings->hold_time_ps = min(0, 1300 + 350 * deskew);
265 
266 	return 0;
267 }
268 
269 static int tfp410_get_connector_properties(struct tfp410 *dvi)
270 {
271 	struct device_node *connector_node, *ddc_phandle;
272 	int ret = 0;
273 
274 	/* port@1 is the connector node */
275 	connector_node = of_graph_get_remote_node(dvi->dev->of_node, 1, -1);
276 	if (!connector_node)
277 		return -ENODEV;
278 
279 	if (of_device_is_compatible(connector_node, "hdmi-connector"))
280 		dvi->connector_type = DRM_MODE_CONNECTOR_HDMIA;
281 	else
282 		dvi->connector_type = DRM_MODE_CONNECTOR_DVID;
283 
284 	dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode,
285 					"hpd-gpios", 0, GPIOD_IN, "hpd");
286 	if (IS_ERR(dvi->hpd)) {
287 		ret = PTR_ERR(dvi->hpd);
288 		dvi->hpd = NULL;
289 		if (ret == -ENOENT)
290 			ret = 0;
291 		else
292 			goto fail;
293 	}
294 
295 	ddc_phandle = of_parse_phandle(connector_node, "ddc-i2c-bus", 0);
296 	if (!ddc_phandle)
297 		goto fail;
298 
299 	dvi->ddc = of_get_i2c_adapter_by_node(ddc_phandle);
300 	if (dvi->ddc)
301 		dev_info(dvi->dev, "Connector's ddc i2c bus found\n");
302 	else
303 		ret = -EPROBE_DEFER;
304 
305 	of_node_put(ddc_phandle);
306 
307 fail:
308 	of_node_put(connector_node);
309 	return ret;
310 }
311 
312 static int tfp410_init(struct device *dev, bool i2c)
313 {
314 	struct tfp410 *dvi;
315 	int ret;
316 
317 	if (!dev->of_node) {
318 		dev_err(dev, "device-tree data is missing\n");
319 		return -ENXIO;
320 	}
321 
322 	dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL);
323 	if (!dvi)
324 		return -ENOMEM;
325 	dev_set_drvdata(dev, dvi);
326 
327 	dvi->bridge.funcs = &tfp410_bridge_funcs;
328 	dvi->bridge.of_node = dev->of_node;
329 	dvi->bridge.timings = &dvi->timings;
330 	dvi->dev = dev;
331 
332 	ret = tfp410_parse_timings(dvi, i2c);
333 	if (ret)
334 		goto fail;
335 
336 	ret = tfp410_get_connector_properties(dvi);
337 	if (ret)
338 		goto fail;
339 
340 	dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
341 						 GPIOD_OUT_HIGH);
342 	if (IS_ERR(dvi->powerdown)) {
343 		dev_err(dev, "failed to parse powerdown gpio\n");
344 		return PTR_ERR(dvi->powerdown);
345 	}
346 
347 	if (dvi->hpd)
348 		dvi->hpd_irq = gpiod_to_irq(dvi->hpd);
349 	else
350 		dvi->hpd_irq = -ENXIO;
351 
352 	if (dvi->hpd_irq >= 0) {
353 		INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
354 
355 		ret = devm_request_threaded_irq(dev, dvi->hpd_irq,
356 			NULL, tfp410_hpd_irq_thread, IRQF_TRIGGER_RISING |
357 			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
358 			"hdmi-hpd", dvi);
359 		if (ret) {
360 			DRM_ERROR("failed to register hpd interrupt\n");
361 			goto fail;
362 		}
363 	}
364 
365 	drm_bridge_add(&dvi->bridge);
366 
367 	return 0;
368 fail:
369 	i2c_put_adapter(dvi->ddc);
370 	if (dvi->hpd)
371 		gpiod_put(dvi->hpd);
372 	return ret;
373 }
374 
375 static int tfp410_fini(struct device *dev)
376 {
377 	struct tfp410 *dvi = dev_get_drvdata(dev);
378 
379 	cancel_delayed_work_sync(&dvi->hpd_work);
380 
381 	drm_bridge_remove(&dvi->bridge);
382 
383 	if (dvi->ddc)
384 		i2c_put_adapter(dvi->ddc);
385 	if (dvi->hpd)
386 		gpiod_put(dvi->hpd);
387 
388 	return 0;
389 }
390 
391 static int tfp410_probe(struct platform_device *pdev)
392 {
393 	return tfp410_init(&pdev->dev, false);
394 }
395 
396 static int tfp410_remove(struct platform_device *pdev)
397 {
398 	return tfp410_fini(&pdev->dev);
399 }
400 
401 static const struct of_device_id tfp410_match[] = {
402 	{ .compatible = "ti,tfp410" },
403 	{},
404 };
405 MODULE_DEVICE_TABLE(of, tfp410_match);
406 
407 static struct platform_driver tfp410_platform_driver = {
408 	.probe	= tfp410_probe,
409 	.remove	= tfp410_remove,
410 	.driver	= {
411 		.name		= "tfp410-bridge",
412 		.of_match_table	= tfp410_match,
413 	},
414 };
415 
416 #if IS_ENABLED(CONFIG_I2C)
417 /* There is currently no i2c functionality. */
418 static int tfp410_i2c_probe(struct i2c_client *client,
419 			    const struct i2c_device_id *id)
420 {
421 	int reg;
422 
423 	if (!client->dev.of_node ||
424 	    of_property_read_u32(client->dev.of_node, "reg", &reg)) {
425 		dev_err(&client->dev,
426 			"Can't get i2c reg property from device-tree\n");
427 		return -ENXIO;
428 	}
429 
430 	return tfp410_init(&client->dev, true);
431 }
432 
433 static int tfp410_i2c_remove(struct i2c_client *client)
434 {
435 	return tfp410_fini(&client->dev);
436 }
437 
438 static const struct i2c_device_id tfp410_i2c_ids[] = {
439 	{ "tfp410", 0 },
440 	{ }
441 };
442 MODULE_DEVICE_TABLE(i2c, tfp410_i2c_ids);
443 
444 static struct i2c_driver tfp410_i2c_driver = {
445 	.driver = {
446 		.name	= "tfp410",
447 		.of_match_table = of_match_ptr(tfp410_match),
448 	},
449 	.id_table	= tfp410_i2c_ids,
450 	.probe		= tfp410_i2c_probe,
451 	.remove		= tfp410_i2c_remove,
452 };
453 #endif /* IS_ENABLED(CONFIG_I2C) */
454 
455 static struct {
456 	uint i2c:1;
457 	uint platform:1;
458 }  tfp410_registered_driver;
459 
460 static int __init tfp410_module_init(void)
461 {
462 	int ret;
463 
464 #if IS_ENABLED(CONFIG_I2C)
465 	ret = i2c_add_driver(&tfp410_i2c_driver);
466 	if (ret)
467 		pr_err("%s: registering i2c driver failed: %d",
468 		       __func__, ret);
469 	else
470 		tfp410_registered_driver.i2c = 1;
471 #endif
472 
473 	ret = platform_driver_register(&tfp410_platform_driver);
474 	if (ret)
475 		pr_err("%s: registering platform driver failed: %d",
476 		       __func__, ret);
477 	else
478 		tfp410_registered_driver.platform = 1;
479 
480 	if (tfp410_registered_driver.i2c ||
481 	    tfp410_registered_driver.platform)
482 		return 0;
483 
484 	return ret;
485 }
486 module_init(tfp410_module_init);
487 
488 static void __exit tfp410_module_exit(void)
489 {
490 #if IS_ENABLED(CONFIG_I2C)
491 	if (tfp410_registered_driver.i2c)
492 		i2c_del_driver(&tfp410_i2c_driver);
493 #endif
494 	if (tfp410_registered_driver.platform)
495 		platform_driver_unregister(&tfp410_platform_driver);
496 }
497 module_exit(tfp410_module_exit);
498 
499 MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>");
500 MODULE_DESCRIPTION("TI TFP410 DVI bridge driver");
501 MODULE_LICENSE("GPL");
502