1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright(c) 2020, Analogix Semiconductor. All rights reserved.
4  *
5  */
6 
7 #ifndef __ANX7625_H__
8 #define __ANX7625_H__
9 
10 #define ANX7625_DRV_VERSION "0.1.04"
11 
12 /* Loading OCM re-trying times */
13 #define OCM_LOADING_TIME 10
14 
15 /*********  ANX7625 Register  **********/
16 #define TX_P0_ADDR				0x70
17 #define TX_P1_ADDR				0x7A
18 #define TX_P2_ADDR				0x72
19 
20 #define RX_P0_ADDR				0x7e
21 #define RX_P1_ADDR				0x84
22 #define RX_P2_ADDR				0x54
23 
24 #define RSVD_00_ADDR				0x00
25 #define RSVD_D1_ADDR				0xD1
26 #define RSVD_60_ADDR				0x60
27 #define RSVD_39_ADDR				0x39
28 #define RSVD_7F_ADDR				0x7F
29 
30 #define TCPC_INTERFACE_ADDR			0x58
31 
32 /* Clock frequency in Hz */
33 #define XTAL_FRQ        (27 * 1000000)
34 
35 #define  POST_DIVIDER_MIN	1
36 #define  POST_DIVIDER_MAX	16
37 #define  PLL_OUT_FREQ_MIN	520000000UL
38 #define  PLL_OUT_FREQ_MAX	730000000UL
39 #define  PLL_OUT_FREQ_ABS_MIN	300000000UL
40 #define  PLL_OUT_FREQ_ABS_MAX	800000000UL
41 #define  MAX_UNSIGNED_24BIT	16777215UL
42 
43 /***************************************************************/
44 /* Register definition of device address 0x58 */
45 
46 #define PRODUCT_ID_L 0x02
47 #define PRODUCT_ID_H 0x03
48 
49 #define INTR_ALERT_1  0xCC
50 #define INTR_SOFTWARE_INT BIT(3)
51 #define INTR_RECEIVED_MSG BIT(5)
52 
53 #define SYSTEM_STSTUS 0x45
54 #define INTERFACE_CHANGE_INT 0x44
55 #define HPD_STATUS_CHANGE 0x80
56 #define HPD_STATUS 0x80
57 
58 /******** END of I2C Address 0x58 ********/
59 
60 /***************************************************************/
61 /* Register definition of device address 0x70 */
62 #define  I2C_ADDR_70_DPTX              0x70
63 
64 #define SP_TX_LINK_BW_SET_REG 0xA0
65 #define SP_TX_LANE_COUNT_SET_REG 0xA1
66 
67 #define M_VID_0 0xC0
68 #define M_VID_1 0xC1
69 #define M_VID_2 0xC2
70 #define N_VID_0 0xC3
71 #define N_VID_1 0xC4
72 #define N_VID_2 0xC5
73 
74 /***************************************************************/
75 /* Register definition of device address 0x72 */
76 #define AUX_RST	0x04
77 #define RST_CTRL2 0x07
78 
79 #define SP_TX_TOTAL_LINE_STA_L 0x24
80 #define SP_TX_TOTAL_LINE_STA_H 0x25
81 #define SP_TX_ACT_LINE_STA_L 0x26
82 #define SP_TX_ACT_LINE_STA_H 0x27
83 #define SP_TX_V_F_PORCH_STA 0x28
84 #define SP_TX_V_SYNC_STA 0x29
85 #define SP_TX_V_B_PORCH_STA 0x2A
86 #define SP_TX_TOTAL_PIXEL_STA_L 0x2B
87 #define SP_TX_TOTAL_PIXEL_STA_H 0x2C
88 #define SP_TX_ACT_PIXEL_STA_L 0x2D
89 #define SP_TX_ACT_PIXEL_STA_H 0x2E
90 #define SP_TX_H_F_PORCH_STA_L 0x2F
91 #define SP_TX_H_F_PORCH_STA_H 0x30
92 #define SP_TX_H_SYNC_STA_L 0x31
93 #define SP_TX_H_SYNC_STA_H 0x32
94 #define SP_TX_H_B_PORCH_STA_L 0x33
95 #define SP_TX_H_B_PORCH_STA_H 0x34
96 
97 #define SP_TX_VID_CTRL 0x84
98 #define SP_TX_BPC_MASK 0xE0
99 #define SP_TX_BPC_6    0x00
100 #define SP_TX_BPC_8    0x20
101 #define SP_TX_BPC_10   0x40
102 #define SP_TX_BPC_12   0x60
103 
104 #define VIDEO_BIT_MATRIX_12 0x4c
105 
106 #define AUDIO_CHANNEL_STATUS_1 0xd0
107 #define AUDIO_CHANNEL_STATUS_2 0xd1
108 #define AUDIO_CHANNEL_STATUS_3 0xd2
109 #define AUDIO_CHANNEL_STATUS_4 0xd3
110 #define AUDIO_CHANNEL_STATUS_5 0xd4
111 #define AUDIO_CHANNEL_STATUS_6 0xd5
112 #define TDM_SLAVE_MODE 0x10
113 #define I2S_SLAVE_MODE 0x08
114 
115 #define AUDIO_CONTROL_REGISTER 0xe6
116 #define TDM_TIMING_MODE 0x08
117 
118 #define I2C_ADDR_72_DPTX              0x72
119 
120 #define HP_MIN			8
121 #define HBLANKING_MIN		80
122 #define SYNC_LEN_DEF		32
123 #define HFP_HBP_DEF		((HBLANKING_MIN - SYNC_LEN_DEF) / 2)
124 #define VIDEO_CONTROL_0	0x08
125 
126 #define  ACTIVE_LINES_L         0x14
127 #define  ACTIVE_LINES_H         0x15  /* Bit[7:6] are reserved */
128 #define  VERTICAL_FRONT_PORCH   0x16
129 #define  VERTICAL_SYNC_WIDTH    0x17
130 #define  VERTICAL_BACK_PORCH    0x18
131 
132 #define  HORIZONTAL_TOTAL_PIXELS_L    0x19
133 #define  HORIZONTAL_TOTAL_PIXELS_H    0x1A  /* Bit[7:6] are reserved */
134 #define  HORIZONTAL_ACTIVE_PIXELS_L   0x1B
135 #define  HORIZONTAL_ACTIVE_PIXELS_H   0x1C  /* Bit[7:6] are reserved */
136 #define  HORIZONTAL_FRONT_PORCH_L     0x1D
137 #define  HORIZONTAL_FRONT_PORCH_H     0x1E  /* Bit[7:4] are reserved */
138 #define  HORIZONTAL_SYNC_WIDTH_L      0x1F
139 #define  HORIZONTAL_SYNC_WIDTH_H      0x20  /* Bit[7:4] are reserved */
140 #define  HORIZONTAL_BACK_PORCH_L      0x21
141 #define  HORIZONTAL_BACK_PORCH_H      0x22  /* Bit[7:4] are reserved */
142 
143 /******** END of I2C Address 0x72 *********/
144 /***************************************************************/
145 /* Register definition of device address 0x7e */
146 
147 #define  I2C_ADDR_7E_FLASH_CONTROLLER  0x7E
148 
149 #define FLASH_LOAD_STA 0x05
150 #define FLASH_LOAD_STA_CHK	BIT(7)
151 
152 #define  XTAL_FRQ_SEL    0x3F
153 /* bit field positions */
154 #define  XTAL_FRQ_SEL_POS    5
155 /* bit field values */
156 #define  XTAL_FRQ_19M2   (0 << XTAL_FRQ_SEL_POS)
157 #define  XTAL_FRQ_27M    (4 << XTAL_FRQ_SEL_POS)
158 
159 #define  R_DSC_CTRL_0    0x40
160 #define  READ_STATUS_EN  7
161 #define  CLK_1MEG_RB     6  /* 1MHz clock reset; 0=reset, 0=reset release */
162 #define  DSC_BIST_DONE   1  /* Bit[5:1]: 1=DSC MBIST pass */
163 #define  DSC_EN          0x01  /* 1=DSC enabled, 0=DSC disabled */
164 
165 #define OCM_FW_VERSION   0x31
166 #define OCM_FW_REVERSION 0x32
167 
168 #define AP_AUX_ADDR_7_0   0x11
169 #define AP_AUX_ADDR_15_8  0x12
170 #define AP_AUX_ADDR_19_16 0x13
171 
172 /* Bit[0:3] AUX status, bit 4 op_en, bit 5 address only */
173 #define AP_AUX_CTRL_STATUS 0x14
174 #define AP_AUX_CTRL_OP_EN 0x10
175 #define AP_AUX_CTRL_ADDRONLY 0x20
176 
177 #define AP_AUX_BUFF_START 0x15
178 #define PIXEL_CLOCK_L 0x25
179 #define PIXEL_CLOCK_H 0x26
180 
181 #define AP_AUX_COMMAND 0x27  /* com+len */
182 /* Bit 0&1: 3D video structure */
183 /* 0x01: frame packing,  0x02:Line alternative, 0x03:Side-by-side(full) */
184 #define AP_AV_STATUS 0x28
185 #define AP_VIDEO_CHG  BIT(2)
186 #define AP_AUDIO_CHG  BIT(3)
187 #define AP_MIPI_MUTE  BIT(4) /* 1:MIPI input mute, 0: ummute */
188 #define AP_MIPI_RX_EN BIT(5) /* 1: MIPI RX input in  0: no RX in */
189 #define AP_DISABLE_PD BIT(6)
190 #define AP_DISABLE_DISPLAY BIT(7)
191 /***************************************************************/
192 /* Register definition of device address 0x84 */
193 #define  MIPI_PHY_CONTROL_3            0x03
194 #define  MIPI_HS_PWD_CLK               7
195 #define  MIPI_HS_RT_CLK                6
196 #define  MIPI_PD_CLK                   5
197 #define  MIPI_CLK_RT_MANUAL_PD_EN      4
198 #define  MIPI_CLK_HS_MANUAL_PD_EN      3
199 #define  MIPI_CLK_DET_DET_BYPASS       2
200 #define  MIPI_CLK_MISS_CTRL            1
201 #define  MIPI_PD_LPTX_CH_MANUAL_PD_EN  0
202 
203 #define  MIPI_LANE_CTRL_0		0x05
204 #define  MIPI_TIME_HS_PRPR		0x08
205 
206 /*
207  * After MIPI RX protocol layer received video frames,
208  * Protocol layer starts to reconstruct video stream from PHY
209  */
210 #define  MIPI_VIDEO_STABLE_CNT           0x0A
211 
212 #define  MIPI_LANE_CTRL_10               0x0F
213 #define  MIPI_DIGITAL_ADJ_1   0x1B
214 
215 #define  MIPI_PLL_M_NUM_23_16   0x1E
216 #define  MIPI_PLL_M_NUM_15_8    0x1F
217 #define  MIPI_PLL_M_NUM_7_0     0x20
218 #define  MIPI_PLL_N_NUM_23_16   0x21
219 #define  MIPI_PLL_N_NUM_15_8    0x22
220 #define  MIPI_PLL_N_NUM_7_0     0x23
221 
222 #define  MIPI_DIGITAL_PLL_6     0x2A
223 /* Bit[7:6]: VCO band control, only effective */
224 #define  MIPI_M_NUM_READY        0x10
225 #define  MIPI_N_NUM_READY        0x08
226 #define  STABLE_INTEGER_CNT_EN   0x04
227 #define  MIPI_PLL_TEST_BIT       0
228 /* Bit[1:0]: test point output select - */
229 /* 00: VCO power, 01: dvdd_pdt, 10: dvdd, 11: vcox */
230 
231 #define  MIPI_DIGITAL_PLL_7      0x2B
232 #define  MIPI_PLL_FORCE_N_EN     7
233 #define  MIPI_PLL_FORCE_BAND_EN  6
234 
235 #define  MIPI_PLL_VCO_TUNE_REG   4
236 /* Bit[5:4]: VCO metal capacitance - */
237 /* 00: +20% fast, 01: +10% fast (default), 10: typical, 11: -10% slow */
238 #define  MIPI_PLL_VCO_TUNE_REG_VAL   0x30
239 
240 #define  MIPI_PLL_PLL_LDO_BIT    2
241 /* Bit[3:2]: vco_v2i power - */
242 /* 00: 1.40V, 01: 1.45V (default), 10: 1.50V, 11: 1.55V */
243 #define  MIPI_PLL_RESET_N        0x02
244 #define  MIPI_FRQ_FORCE_NDET     0
245 
246 #define  MIPI_ALERT_CLR_0        0x2D
247 #define  HS_link_error_clear     7
248 /* This bit itself is S/C, and it clears 0x84:0x31[7] */
249 
250 #define  MIPI_ALERT_OUT_0        0x31
251 #define  check_sum_err_hs_sync   7
252 /* This bit is cleared by 0x84:0x2D[7] */
253 
254 #define  MIPI_DIGITAL_PLL_8    0x33
255 #define  MIPI_POST_DIV_VAL     4
256 /* N means divided by (n+1), n = 0~15 */
257 #define  MIPI_EN_LOCK_FRZ      3
258 #define  MIPI_FRQ_COUNTER_RST  2
259 #define  MIPI_FRQ_SET_REG_8    1
260 /* Bit 0 is reserved */
261 
262 #define  MIPI_DIGITAL_PLL_9    0x34
263 
264 #define  MIPI_DIGITAL_PLL_16   0x3B
265 #define  MIPI_FRQ_FREEZE_NDET          7
266 #define  MIPI_FRQ_REG_SET_ENABLE       6
267 #define  MIPI_REG_FORCE_SEL_EN         5
268 #define  MIPI_REG_SEL_DIV_REG          4
269 #define  MIPI_REG_FORCE_PRE_DIV_EN     3
270 /* Bit 2 is reserved */
271 #define  MIPI_FREF_D_IND               1
272 #define  REF_CLK_27000KHZ    1
273 #define  REF_CLK_19200KHZ    0
274 #define  MIPI_REG_PLL_PLL_TEST_ENABLE  0
275 
276 #define  MIPI_DIGITAL_PLL_18  0x3D
277 #define  FRQ_COUNT_RB_SEL       7
278 #define  REG_FORCE_POST_DIV_EN  6
279 #define  MIPI_DPI_SELECT        5
280 #define  SELECT_DSI  1
281 #define  SELECT_DPI  0
282 #define  REG_BAUD_DIV_RATIO     0
283 
284 #define  H_BLANK_L            0x3E
285 /* For DSC only */
286 #define  H_BLANK_H            0x3F
287 /* For DSC only; note: bit[7:6] are reserved */
288 #define  MIPI_SWAP  0x4A
289 #define  MIPI_SWAP_CH0    7
290 #define  MIPI_SWAP_CH1    6
291 #define  MIPI_SWAP_CH2    5
292 #define  MIPI_SWAP_CH3    4
293 #define  MIPI_SWAP_CLK    3
294 /* Bit[2:0] are reserved */
295 
296 /******** END of I2C Address 0x84 *********/
297 
298 /* DPCD regs */
299 #define DPCD_DPCD_REV                  0x00
300 #define DPCD_MAX_LINK_RATE             0x01
301 #define DPCD_MAX_LANE_COUNT            0x02
302 
303 /*********  ANX7625 Register End  **********/
304 
305 /***************** Display *****************/
306 enum audio_fs {
307 	AUDIO_FS_441K  = 0x00,
308 	AUDIO_FS_48K   = 0x02,
309 	AUDIO_FS_32K   = 0x03,
310 	AUDIO_FS_882K  = 0x08,
311 	AUDIO_FS_96K   = 0x0a,
312 	AUDIO_FS_1764K = 0x0c,
313 	AUDIO_FS_192K  = 0x0e
314 };
315 
316 enum audio_wd_len {
317 	AUDIO_W_LEN_16_20MAX = 0x02,
318 	AUDIO_W_LEN_18_20MAX = 0x04,
319 	AUDIO_W_LEN_17_20MAX = 0x0c,
320 	AUDIO_W_LEN_19_20MAX = 0x08,
321 	AUDIO_W_LEN_20_20MAX = 0x0a,
322 	AUDIO_W_LEN_20_24MAX = 0x03,
323 	AUDIO_W_LEN_22_24MAX = 0x05,
324 	AUDIO_W_LEN_21_24MAX = 0x0d,
325 	AUDIO_W_LEN_23_24MAX = 0x09,
326 	AUDIO_W_LEN_24_24MAX = 0x0b
327 };
328 
329 #define I2S_CH_2	0x01
330 #define TDM_CH_4	0x03
331 #define TDM_CH_6	0x05
332 #define TDM_CH_8	0x07
333 
334 #define MAX_DPCD_BUFFER_SIZE	16
335 
336 #define ONE_BLOCK_SIZE      128
337 #define FOUR_BLOCK_SIZE     (128 * 4)
338 
339 #define MAX_EDID_BLOCK	3
340 #define EDID_TRY_CNT	3
341 #define SUPPORT_PIXEL_CLOCK	300000
342 
343 struct s_edid_data {
344 	int edid_block_num;
345 	u8 edid_raw_data[FOUR_BLOCK_SIZE];
346 };
347 
348 /***************** Display End *****************/
349 
350 struct anx7625_platform_data {
351 	struct gpio_desc *gpio_p_on;
352 	struct gpio_desc *gpio_reset;
353 	struct regulator_bulk_data supplies[3];
354 	struct drm_bridge *panel_bridge;
355 	int intp_irq;
356 	u32 low_power_mode;
357 	struct device_node *mipi_host_node;
358 };
359 
360 struct anx7625_i2c_client {
361 	struct i2c_client *tx_p0_client;
362 	struct i2c_client *tx_p1_client;
363 	struct i2c_client *tx_p2_client;
364 	struct i2c_client *rx_p0_client;
365 	struct i2c_client *rx_p1_client;
366 	struct i2c_client *rx_p2_client;
367 	struct i2c_client *tcpc_client;
368 };
369 
370 struct anx7625_data {
371 	struct anx7625_platform_data pdata;
372 	int hpd_status;
373 	int hpd_high_cnt;
374 	/* Lock for work queue */
375 	struct mutex lock;
376 	struct i2c_client *client;
377 	struct anx7625_i2c_client i2c;
378 	struct i2c_client *last_client;
379 	struct s_edid_data slimport_edid_p;
380 	struct work_struct work;
381 	struct workqueue_struct *workqueue;
382 	char edid_block;
383 	struct display_timing dt;
384 	u8 display_timing_valid;
385 	struct drm_bridge bridge;
386 	u8 bridge_attached;
387 	struct mipi_dsi_device *dsi;
388 };
389 
390 #endif  /* __ANX7625_H__ */
391