1 /* 2 * Copyright 2012 Red Hat Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the 6 * "Software"), to deal in the Software without restriction, including 7 * without limitation the rights to use, copy, modify, merge, publish, 8 * distribute, sub license, and/or sell copies of the Software, and to 9 * permit persons to whom the Software is furnished to do so, subject to 10 * the following conditions: 11 * 12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 13 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 14 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 15 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, 16 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 17 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE 18 * USE OR OTHER DEALINGS IN THE SOFTWARE. 19 * 20 * The above copyright notice and this permission notice (including the 21 * next paragraph) shall be included in all copies or substantial portions 22 * of the Software. 23 * 24 */ 25 /* 26 * Authors: Dave Airlie <airlied@redhat.com> 27 */ 28 29 #include <linux/pci.h> 30 31 #include <drm/drm_atomic_helper.h> 32 #include <drm/drm_crtc_helper.h> 33 #include <drm/drm_drv.h> 34 #include <drm/drm_gem.h> 35 #include <drm/drm_gem_vram_helper.h> 36 #include <drm/drm_managed.h> 37 38 #include "ast_drv.h" 39 40 void ast_set_index_reg_mask(struct ast_private *ast, 41 uint32_t base, uint8_t index, 42 uint8_t mask, uint8_t val) 43 { 44 u8 tmp; 45 ast_io_write8(ast, base, index); 46 tmp = (ast_io_read8(ast, base + 1) & mask) | val; 47 ast_set_index_reg(ast, base, index, tmp); 48 } 49 50 uint8_t ast_get_index_reg(struct ast_private *ast, 51 uint32_t base, uint8_t index) 52 { 53 uint8_t ret; 54 ast_io_write8(ast, base, index); 55 ret = ast_io_read8(ast, base + 1); 56 return ret; 57 } 58 59 uint8_t ast_get_index_reg_mask(struct ast_private *ast, 60 uint32_t base, uint8_t index, uint8_t mask) 61 { 62 uint8_t ret; 63 ast_io_write8(ast, base, index); 64 ret = ast_io_read8(ast, base + 1) & mask; 65 return ret; 66 } 67 68 static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) 69 { 70 struct device_node *np = dev->pdev->dev.of_node; 71 struct ast_private *ast = to_ast_private(dev); 72 uint32_t data, jregd0, jregd1; 73 74 /* Defaults */ 75 ast->config_mode = ast_use_defaults; 76 *scu_rev = 0xffffffff; 77 78 /* Check if we have device-tree properties */ 79 if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", 80 scu_rev)) { 81 /* We do, disable P2A access */ 82 ast->config_mode = ast_use_dt; 83 drm_info(dev, "Using device-tree for configuration\n"); 84 return; 85 } 86 87 /* Not all families have a P2A bridge */ 88 if (dev->pdev->device != PCI_CHIP_AST2000) 89 return; 90 91 /* 92 * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge 93 * is disabled. We force using P2A if VGA only mode bit 94 * is set D[7] 95 */ 96 jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); 97 jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff); 98 if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) { 99 /* Double check it's actually working */ 100 data = ast_read32(ast, 0xf004); 101 if (data != 0xFFFFFFFF) { 102 /* P2A works, grab silicon revision */ 103 ast->config_mode = ast_use_p2a; 104 105 drm_info(dev, "Using P2A bridge for configuration\n"); 106 107 /* Read SCU7c (silicon revision register) */ 108 ast_write32(ast, 0xf004, 0x1e6e0000); 109 ast_write32(ast, 0xf000, 0x1); 110 *scu_rev = ast_read32(ast, 0x1207c); 111 return; 112 } 113 } 114 115 /* We have a P2A bridge but it's disabled */ 116 drm_info(dev, "P2A bridge disabled, using default configuration\n"); 117 } 118 119 static int ast_detect_chip(struct drm_device *dev, bool *need_post) 120 { 121 struct ast_private *ast = to_ast_private(dev); 122 uint32_t jreg, scu_rev; 123 124 /* 125 * If VGA isn't enabled, we need to enable now or subsequent 126 * access to the scratch registers will fail. We also inform 127 * our caller that it needs to POST the chip 128 * (Assumption: VGA not enabled -> need to POST) 129 */ 130 if (!ast_is_vga_enabled(dev)) { 131 ast_enable_vga(dev); 132 drm_info(dev, "VGA not enabled on entry, requesting chip POST\n"); 133 *need_post = true; 134 } else 135 *need_post = false; 136 137 138 /* Enable extended register access */ 139 ast_open_key(ast); 140 ast_enable_mmio(dev); 141 142 /* Find out whether P2A works or whether to use device-tree */ 143 ast_detect_config_mode(dev, &scu_rev); 144 145 /* Identify chipset */ 146 if (dev->pdev->revision >= 0x50) { 147 ast->chip = AST2600; 148 drm_info(dev, "AST 2600 detected\n"); 149 } else if (dev->pdev->revision >= 0x40) { 150 ast->chip = AST2500; 151 drm_info(dev, "AST 2500 detected\n"); 152 } else if (dev->pdev->revision >= 0x30) { 153 ast->chip = AST2400; 154 drm_info(dev, "AST 2400 detected\n"); 155 } else if (dev->pdev->revision >= 0x20) { 156 ast->chip = AST2300; 157 drm_info(dev, "AST 2300 detected\n"); 158 } else if (dev->pdev->revision >= 0x10) { 159 switch (scu_rev & 0x0300) { 160 case 0x0200: 161 ast->chip = AST1100; 162 drm_info(dev, "AST 1100 detected\n"); 163 break; 164 case 0x0100: 165 ast->chip = AST2200; 166 drm_info(dev, "AST 2200 detected\n"); 167 break; 168 case 0x0000: 169 ast->chip = AST2150; 170 drm_info(dev, "AST 2150 detected\n"); 171 break; 172 default: 173 ast->chip = AST2100; 174 drm_info(dev, "AST 2100 detected\n"); 175 break; 176 } 177 ast->vga2_clone = false; 178 } else { 179 ast->chip = AST2000; 180 drm_info(dev, "AST 2000 detected\n"); 181 } 182 183 /* Check if we support wide screen */ 184 switch (ast->chip) { 185 case AST2000: 186 ast->support_wide_screen = false; 187 break; 188 default: 189 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); 190 if (!(jreg & 0x80)) 191 ast->support_wide_screen = true; 192 else if (jreg & 0x01) 193 ast->support_wide_screen = true; 194 else { 195 ast->support_wide_screen = false; 196 if (ast->chip == AST2300 && 197 (scu_rev & 0x300) == 0x0) /* ast1300 */ 198 ast->support_wide_screen = true; 199 if (ast->chip == AST2400 && 200 (scu_rev & 0x300) == 0x100) /* ast1400 */ 201 ast->support_wide_screen = true; 202 if (ast->chip == AST2500 && 203 scu_rev == 0x100) /* ast2510 */ 204 ast->support_wide_screen = true; 205 } 206 break; 207 } 208 209 /* Check 3rd Tx option (digital output afaik) */ 210 ast->tx_chip_type = AST_TX_NONE; 211 212 /* 213 * VGACRA3 Enhanced Color Mode Register, check if DVO is already 214 * enabled, in that case, assume we have a SIL164 TMDS transmitter 215 * 216 * Don't make that assumption if we the chip wasn't enabled and 217 * is at power-on reset, otherwise we'll incorrectly "detect" a 218 * SIL164 when there is none. 219 */ 220 if (!*need_post) { 221 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff); 222 if (jreg & 0x80) 223 ast->tx_chip_type = AST_TX_SIL164; 224 } 225 226 if ((ast->chip == AST2300) || (ast->chip == AST2400)) { 227 /* 228 * On AST2300 and 2400, look the configuration set by the SoC in 229 * the SOC scratch register #1 bits 11:8 (interestingly marked 230 * as "reserved" in the spec) 231 */ 232 jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff); 233 switch (jreg) { 234 case 0x04: 235 ast->tx_chip_type = AST_TX_SIL164; 236 break; 237 case 0x08: 238 ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, GFP_KERNEL); 239 if (ast->dp501_fw_addr) { 240 /* backup firmware */ 241 if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) { 242 drmm_kfree(dev, ast->dp501_fw_addr); 243 ast->dp501_fw_addr = NULL; 244 } 245 } 246 fallthrough; 247 case 0x0c: 248 ast->tx_chip_type = AST_TX_DP501; 249 } 250 } 251 252 /* Print stuff for diagnostic purposes */ 253 switch(ast->tx_chip_type) { 254 case AST_TX_SIL164: 255 drm_info(dev, "Using Sil164 TMDS transmitter\n"); 256 break; 257 case AST_TX_DP501: 258 drm_info(dev, "Using DP501 DisplayPort transmitter\n"); 259 break; 260 default: 261 drm_info(dev, "Analog VGA only\n"); 262 } 263 return 0; 264 } 265 266 static int ast_get_dram_info(struct drm_device *dev) 267 { 268 struct device_node *np = dev->pdev->dev.of_node; 269 struct ast_private *ast = to_ast_private(dev); 270 uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap; 271 uint32_t denum, num, div, ref_pll, dsel; 272 273 switch (ast->config_mode) { 274 case ast_use_dt: 275 /* 276 * If some properties are missing, use reasonable 277 * defaults for AST2400 278 */ 279 if (of_property_read_u32(np, "aspeed,mcr-configuration", 280 &mcr_cfg)) 281 mcr_cfg = 0x00000577; 282 if (of_property_read_u32(np, "aspeed,mcr-scu-mpll", 283 &mcr_scu_mpll)) 284 mcr_scu_mpll = 0x000050C0; 285 if (of_property_read_u32(np, "aspeed,mcr-scu-strap", 286 &mcr_scu_strap)) 287 mcr_scu_strap = 0; 288 break; 289 case ast_use_p2a: 290 ast_write32(ast, 0xf004, 0x1e6e0000); 291 ast_write32(ast, 0xf000, 0x1); 292 mcr_cfg = ast_read32(ast, 0x10004); 293 mcr_scu_mpll = ast_read32(ast, 0x10120); 294 mcr_scu_strap = ast_read32(ast, 0x10170); 295 break; 296 case ast_use_defaults: 297 default: 298 ast->dram_bus_width = 16; 299 ast->dram_type = AST_DRAM_1Gx16; 300 if (ast->chip == AST2500) 301 ast->mclk = 800; 302 else 303 ast->mclk = 396; 304 return 0; 305 } 306 307 if (mcr_cfg & 0x40) 308 ast->dram_bus_width = 16; 309 else 310 ast->dram_bus_width = 32; 311 312 if (ast->chip == AST2500) { 313 switch (mcr_cfg & 0x03) { 314 case 0: 315 ast->dram_type = AST_DRAM_1Gx16; 316 break; 317 default: 318 case 1: 319 ast->dram_type = AST_DRAM_2Gx16; 320 break; 321 case 2: 322 ast->dram_type = AST_DRAM_4Gx16; 323 break; 324 case 3: 325 ast->dram_type = AST_DRAM_8Gx16; 326 break; 327 } 328 } else if (ast->chip == AST2300 || ast->chip == AST2400) { 329 switch (mcr_cfg & 0x03) { 330 case 0: 331 ast->dram_type = AST_DRAM_512Mx16; 332 break; 333 default: 334 case 1: 335 ast->dram_type = AST_DRAM_1Gx16; 336 break; 337 case 2: 338 ast->dram_type = AST_DRAM_2Gx16; 339 break; 340 case 3: 341 ast->dram_type = AST_DRAM_4Gx16; 342 break; 343 } 344 } else { 345 switch (mcr_cfg & 0x0c) { 346 case 0: 347 case 4: 348 ast->dram_type = AST_DRAM_512Mx16; 349 break; 350 case 8: 351 if (mcr_cfg & 0x40) 352 ast->dram_type = AST_DRAM_1Gx16; 353 else 354 ast->dram_type = AST_DRAM_512Mx32; 355 break; 356 case 0xc: 357 ast->dram_type = AST_DRAM_1Gx32; 358 break; 359 } 360 } 361 362 if (mcr_scu_strap & 0x2000) 363 ref_pll = 14318; 364 else 365 ref_pll = 12000; 366 367 denum = mcr_scu_mpll & 0x1f; 368 num = (mcr_scu_mpll & 0x3fe0) >> 5; 369 dsel = (mcr_scu_mpll & 0xc000) >> 14; 370 switch (dsel) { 371 case 3: 372 div = 0x4; 373 break; 374 case 2: 375 case 1: 376 div = 0x2; 377 break; 378 default: 379 div = 0x1; 380 break; 381 } 382 ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000)); 383 return 0; 384 } 385 386 /* 387 * Run this function as part of the HW device cleanup; not 388 * when the DRM device gets released. 389 */ 390 static void ast_device_release(void *data) 391 { 392 struct ast_private *ast = data; 393 394 /* enable standard VGA decode */ 395 ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04); 396 } 397 398 struct ast_private *ast_device_create(const struct drm_driver *drv, 399 struct pci_dev *pdev, 400 unsigned long flags) 401 { 402 struct drm_device *dev; 403 struct ast_private *ast; 404 bool need_post; 405 int ret = 0; 406 407 ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_private, base); 408 if (IS_ERR(ast)) 409 return ast; 410 dev = &ast->base; 411 412 dev->pdev = pdev; 413 pci_set_drvdata(pdev, dev); 414 415 ast->regs = pci_iomap(dev->pdev, 1, 0); 416 if (!ast->regs) 417 return ERR_PTR(-EIO); 418 419 /* 420 * If we don't have IO space at all, use MMIO now and 421 * assume the chip has MMIO enabled by default (rev 0x20 422 * and higher). 423 */ 424 if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) { 425 drm_info(dev, "platform has no IO space, trying MMIO\n"); 426 ast->ioregs = ast->regs + AST_IO_MM_OFFSET; 427 } 428 429 /* "map" IO regs if the above hasn't done so already */ 430 if (!ast->ioregs) { 431 ast->ioregs = pci_iomap(dev->pdev, 2, 0); 432 if (!ast->ioregs) 433 return ERR_PTR(-EIO); 434 } 435 436 ast_detect_chip(dev, &need_post); 437 438 ret = ast_get_dram_info(dev); 439 if (ret) 440 return ERR_PTR(ret); 441 442 drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n", 443 ast->mclk, ast->dram_type, ast->dram_bus_width); 444 445 if (need_post) 446 ast_post_gpu(dev); 447 448 ret = ast_mm_init(ast); 449 if (ret) 450 return ERR_PTR(ret); 451 452 ret = ast_mode_config_init(ast); 453 if (ret) 454 return ERR_PTR(ret); 455 456 ret = devm_add_action_or_reset(dev->dev, ast_device_release, ast); 457 if (ret) 458 return ERR_PTR(ret); 459 460 return ast; 461 } 462