1 /*
2  * Copyright 2006-2007 Advanced Micro Devices, Inc.
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice shall be included in
12  * all copies or substantial portions of the Software.
13  *
14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
17  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20  * OTHER DEALINGS IN THE SOFTWARE.
21  */
22 
23 
24 /****************************************************************************/
25 /*Portion I: Definitions  shared between VBIOS and Driver                   */
26 /****************************************************************************/
27 
28 #ifndef _ATOMBIOS_H
29 #define _ATOMBIOS_H
30 
31 #define ATOM_VERSION_MAJOR                   0x00020000
32 #define ATOM_VERSION_MINOR                   0x00000002
33 
34 #define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
35 
36 /* Endianness should be specified before inclusion,
37  * default to little endian
38  */
39 #ifndef ATOM_BIG_ENDIAN
40 #error Endian not specified
41 #endif
42 
43 #ifdef _H2INC
44   #ifndef ULONG
45     typedef unsigned long ULONG;
46   #endif
47 
48   #ifndef UCHAR
49     typedef unsigned char UCHAR;
50   #endif
51 
52   #ifndef USHORT
53     typedef unsigned short USHORT;
54   #endif
55 #endif
56 
57 #define ATOM_DAC_A            0
58 #define ATOM_DAC_B            1
59 #define ATOM_EXT_DAC          2
60 
61 #define ATOM_CRTC1            0
62 #define ATOM_CRTC2            1
63 #define ATOM_CRTC3            2
64 #define ATOM_CRTC4            3
65 #define ATOM_CRTC5            4
66 #define ATOM_CRTC6            5
67 
68 #define ATOM_UNDERLAY_PIPE0   16
69 #define ATOM_UNDERLAY_PIPE1   17
70 
71 #define ATOM_CRTC_INVALID     0xFF
72 
73 #define ATOM_DIGA             0
74 #define ATOM_DIGB             1
75 
76 #define ATOM_PPLL1            0
77 #define ATOM_PPLL2            1
78 #define ATOM_DCPLL            2
79 #define ATOM_PPLL0            2
80 #define ATOM_PPLL3            3
81 
82 #define ATOM_PHY_PLL0         4
83 #define ATOM_PHY_PLL1         5
84 
85 #define ATOM_EXT_PLL1         8
86 #define ATOM_GCK_DFS          8
87 #define ATOM_EXT_PLL2         9
88 #define ATOM_FCH_CLK          9
89 #define ATOM_EXT_CLOCK        10
90 #define ATOM_DP_DTO           11
91 
92 #define ATOM_COMBOPHY_PLL0    20
93 #define ATOM_COMBOPHY_PLL1    21
94 #define ATOM_COMBOPHY_PLL2    22
95 #define ATOM_COMBOPHY_PLL3    23
96 #define ATOM_COMBOPHY_PLL4    24
97 #define ATOM_COMBOPHY_PLL5    25
98 
99 #define ATOM_PPLL_INVALID     0xFF
100 
101 #define ENCODER_REFCLK_SRC_P1PLL       0
102 #define ENCODER_REFCLK_SRC_P2PLL       1
103 #define ENCODER_REFCLK_SRC_DCPLL       2
104 #define ENCODER_REFCLK_SRC_EXTCLK      3
105 #define ENCODER_REFCLK_SRC_INVALID     0xFF
106 
107 #define ATOM_SCALER_DISABLE   0   //For Fudo, it's bypass and auto-cengter & no replication
108 #define ATOM_SCALER_CENTER    1   //For Fudo, it's bypass and auto-center & auto replication
109 #define ATOM_SCALER_EXPANSION 2   //For Fudo, it's 2 Tap alpha blending mode
110 #define ATOM_SCALER_MULTI_EX  3   //For Fudo only, it's multi-tap mode only used to drive TV or CV, only used by Bios
111 
112 #define ATOM_DISABLE          0
113 #define ATOM_ENABLE           1
114 #define ATOM_LCD_BLOFF                          (ATOM_DISABLE+2)
115 #define ATOM_LCD_BLON                           (ATOM_ENABLE+2)
116 #define ATOM_LCD_BL_BRIGHTNESS_CONTROL          (ATOM_ENABLE+3)
117 #define ATOM_LCD_SELFTEST_START                 (ATOM_DISABLE+5)
118 #define ATOM_LCD_SELFTEST_STOP                  (ATOM_ENABLE+5)
119 #define ATOM_ENCODER_INIT                       (ATOM_DISABLE+7)
120 #define ATOM_INIT                               (ATOM_DISABLE+7)
121 #define ATOM_GET_STATUS                         (ATOM_DISABLE+8)
122 
123 #define ATOM_BLANKING         1
124 #define ATOM_BLANKING_OFF     0
125 
126 
127 #define ATOM_CRT1             0
128 #define ATOM_CRT2             1
129 
130 #define ATOM_TV_NTSC          1
131 #define ATOM_TV_NTSCJ         2
132 #define ATOM_TV_PAL           3
133 #define ATOM_TV_PALM          4
134 #define ATOM_TV_PALCN         5
135 #define ATOM_TV_PALN          6
136 #define ATOM_TV_PAL60         7
137 #define ATOM_TV_SECAM         8
138 #define ATOM_TV_CV            16
139 
140 #define ATOM_DAC1_PS2         1
141 #define ATOM_DAC1_CV          2
142 #define ATOM_DAC1_NTSC        3
143 #define ATOM_DAC1_PAL         4
144 
145 #define ATOM_DAC2_PS2         ATOM_DAC1_PS2
146 #define ATOM_DAC2_CV          ATOM_DAC1_CV
147 #define ATOM_DAC2_NTSC        ATOM_DAC1_NTSC
148 #define ATOM_DAC2_PAL         ATOM_DAC1_PAL
149 
150 #define ATOM_PM_ON            0
151 #define ATOM_PM_STANDBY       1
152 #define ATOM_PM_SUSPEND       2
153 #define ATOM_PM_OFF           3
154 
155 // For ATOM_LVDS_INFO_V12
156 // Bit0:{=0:single, =1:dual},
157 // Bit1 {=0:666RGB, =1:888RGB},
158 // Bit2:3:{Grey level}
159 // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
160 #define ATOM_PANEL_MISC_DUAL               0x00000001
161 #define ATOM_PANEL_MISC_888RGB             0x00000002
162 #define ATOM_PANEL_MISC_GREY_LEVEL         0x0000000C
163 #define ATOM_PANEL_MISC_FPDI               0x00000010
164 #define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT   2
165 #define ATOM_PANEL_MISC_SPATIAL            0x00000020
166 #define ATOM_PANEL_MISC_TEMPORAL           0x00000040
167 #define ATOM_PANEL_MISC_API_ENABLED        0x00000080
168 
169 #define MEMTYPE_DDR1                       "DDR1"
170 #define MEMTYPE_DDR2                       "DDR2"
171 #define MEMTYPE_DDR3                       "DDR3"
172 #define MEMTYPE_DDR4                       "DDR4"
173 
174 #define ASIC_BUS_TYPE_PCI                  "PCI"
175 #define ASIC_BUS_TYPE_AGP                  "AGP"
176 #define ASIC_BUS_TYPE_PCIE                 "PCI_EXPRESS"
177 
178 //Maximum size of that FireGL flag string
179 #define ATOM_FIREGL_FLAG_STRING            "FGL"      //Flag used to enable FireGL Support
180 #define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING     3     //sizeof( ATOM_FIREGL_FLAG_STRING )
181 
182 #define ATOM_FAKE_DESKTOP_STRING           "DSK"      //Flag used to enable mobile ASIC on Desktop
183 #define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING    ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
184 
185 #define ATOM_M54T_FLAG_STRING              "M54T"     //Flag used to enable M54T Support
186 #define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING  4          //sizeof( ATOM_M54T_FLAG_STRING )
187 
188 #define HW_ASSISTED_I2C_STATUS_FAILURE     2
189 #define HW_ASSISTED_I2C_STATUS_SUCCESS     1
190 
191 #pragma pack(1)                                       // BIOS data must use byte alignment
192 
193 // Define offset to location of ROM header.
194 #define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER         0x00000048L
195 #define OFFSET_TO_ATOM_ROM_IMAGE_SIZE                0x00000002L
196 
197 #define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE         0x94
198 #define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE        20    //including the terminator 0x0!
199 #define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER      0x002f
200 #define OFFSET_TO_GET_ATOMBIOS_STRINGS_START       0x006e
201 
202 /****************************************************************************/
203 // Common header for all tables (Data table, Command table).
204 // Every table pointed  _ATOM_MASTER_DATA_TABLE has this common header.
205 // And the pointer actually points to this header.
206 /****************************************************************************/
207 
208 typedef struct _ATOM_COMMON_TABLE_HEADER
209 {
210   USHORT usStructureSize;
211   UCHAR  ucTableFormatRevision;   //Change it when the Parser is not backward compatible
212   UCHAR  ucTableContentRevision;  //Change it only when the table needs to change but the firmware
213                                   //Image can't be updated, while Driver needs to carry the new table!
214 }ATOM_COMMON_TABLE_HEADER;
215 
216 /****************************************************************************/
217 // Structure stores the ROM header.
218 /****************************************************************************/
219 typedef struct _ATOM_ROM_HEADER
220 {
221   ATOM_COMMON_TABLE_HEADER      sHeader;
222   UCHAR  uaFirmWareSignature[4];    //Signature to distinguish between Atombios and non-atombios,
223                                     //atombios should init it as "ATOM", don't change the position
224   USHORT usBiosRuntimeSegmentAddress;
225   USHORT usProtectedModeInfoOffset;
226   USHORT usConfigFilenameOffset;
227   USHORT usCRC_BlockOffset;
228   USHORT usBIOS_BootupMessageOffset;
229   USHORT usInt10Offset;
230   USHORT usPciBusDevInitCode;
231   USHORT usIoBaseAddress;
232   USHORT usSubsystemVendorID;
233   USHORT usSubsystemID;
234   USHORT usPCI_InfoOffset;
235   USHORT usMasterCommandTableOffset;//Offest for SW to get all command table offsets, Don't change the position
236   USHORT usMasterDataTableOffset;   //Offest for SW to get all data table offsets, Don't change the position
237   UCHAR  ucExtendedFunctionCode;
238   UCHAR  ucReserved;
239 }ATOM_ROM_HEADER;
240 
241 
242 typedef struct _ATOM_ROM_HEADER_V2_1
243 {
244   ATOM_COMMON_TABLE_HEADER      sHeader;
245   UCHAR  uaFirmWareSignature[4];    //Signature to distinguish between Atombios and non-atombios,
246                                     //atombios should init it as "ATOM", don't change the position
247   USHORT usBiosRuntimeSegmentAddress;
248   USHORT usProtectedModeInfoOffset;
249   USHORT usConfigFilenameOffset;
250   USHORT usCRC_BlockOffset;
251   USHORT usBIOS_BootupMessageOffset;
252   USHORT usInt10Offset;
253   USHORT usPciBusDevInitCode;
254   USHORT usIoBaseAddress;
255   USHORT usSubsystemVendorID;
256   USHORT usSubsystemID;
257   USHORT usPCI_InfoOffset;
258   USHORT usMasterCommandTableOffset;//Offest for SW to get all command table offsets, Don't change the position
259   USHORT usMasterDataTableOffset;   //Offest for SW to get all data table offsets, Don't change the position
260   UCHAR  ucExtendedFunctionCode;
261   UCHAR  ucReserved;
262   ULONG  ulPSPDirTableOffset;
263 }ATOM_ROM_HEADER_V2_1;
264 
265 
266 //==============================Command Table Portion====================================
267 
268 
269 /****************************************************************************/
270 // Structures used in Command.mtb
271 /****************************************************************************/
272 typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
273   USHORT ASIC_Init;                              //Function Table, used by various SW components,latest version 1.1
274   USHORT GetDisplaySurfaceSize;                  //Atomic Table,  Used by Bios when enabling HW ICON
275   USHORT ASIC_RegistersInit;                     //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
276   USHORT VRAM_BlockVenderDetection;              //Atomic Table,  used only by Bios
277   USHORT DIGxEncoderControl;                     //Only used by Bios
278   USHORT MemoryControllerInit;                   //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
279   USHORT EnableCRTCMemReq;                       //Function Table,directly used by various SW components,latest version 2.1
280   USHORT MemoryParamAdjust;                      //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock if needed
281   USHORT DVOEncoderControl;                      //Function Table,directly used by various SW components,latest version 1.2
282   USHORT GPIOPinControl;                         //Atomic Table,  only used by Bios
283   USHORT SetEngineClock;                         //Function Table,directly used by various SW components,latest version 1.1
284   USHORT SetMemoryClock;                         //Function Table,directly used by various SW components,latest version 1.1
285   USHORT SetPixelClock;                          //Function Table,directly used by various SW components,latest version 1.2
286   USHORT EnableDispPowerGating;                  //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
287   USHORT ResetMemoryDLL;                         //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
288   USHORT ResetMemoryDevice;                      //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
289   USHORT MemoryPLLInit;                          //Atomic Table,  used only by Bios
290   USHORT AdjustDisplayPll;                       //Atomic Table,  used by various SW componentes.
291   USHORT AdjustMemoryController;                 //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
292   USHORT EnableASIC_StaticPwrMgt;                //Atomic Table,  only used by Bios
293   USHORT SetUniphyInstance;                      //Atomic Table,  only used by Bios
294   USHORT DAC_LoadDetection;                      //Atomic Table,  directly used by various SW components,latest version 1.2
295   USHORT LVTMAEncoderControl;                    //Atomic Table,directly used by various SW components,latest version 1.3
296   USHORT HW_Misc_Operation;                      //Atomic Table,  directly used by various SW components,latest version 1.1
297   USHORT DAC1EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
298   USHORT DAC2EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
299   USHORT DVOOutputControl;                       //Atomic Table,  directly used by various SW components,latest version 1.1
300   USHORT CV1OutputControl;                       //Atomic Table,  Atomic Table,  Obsolete from Ry6xx, use DAC2 Output instead
301   USHORT GetConditionalGoldenSetting;            //Only used by Bios
302   USHORT SMC_Init;                               //Function Table,directly used by various SW components,latest version 1.1
303   USHORT PatchMCSetting;                         //only used by BIOS
304   USHORT MC_SEQ_Control;                         //only used by BIOS
305   USHORT Gfx_Harvesting;                         //Atomic Table,  Obsolete from Ry6xx, Now only used by BIOS for GFX harvesting
306   USHORT EnableScaler;                           //Atomic Table,  used only by Bios
307   USHORT BlankCRTC;                              //Atomic Table,  directly used by various SW components,latest version 1.1
308   USHORT EnableCRTC;                             //Atomic Table,  directly used by various SW components,latest version 1.1
309   USHORT GetPixelClock;                          //Atomic Table,  directly used by various SW components,latest version 1.1
310   USHORT EnableVGA_Render;                       //Function Table,directly used by various SW components,latest version 1.1
311   USHORT GetSCLKOverMCLKRatio;                   //Atomic Table,  only used by Bios
312   USHORT SetCRTC_Timing;                         //Atomic Table,  directly used by various SW components,latest version 1.1
313   USHORT SetCRTC_OverScan;                       //Atomic Table,  used by various SW components,latest version 1.1
314   USHORT GetSMUClockInfo;                         //Atomic Table,  used only by Bios
315   USHORT SelectCRTC_Source;                      //Atomic Table,  directly used by various SW components,latest version 1.1
316   USHORT EnableGraphSurfaces;                    //Atomic Table,  used only by Bios
317   USHORT UpdateCRTC_DoubleBufferRegisters;       //Atomic Table,  used only by Bios
318   USHORT LUT_AutoFill;                           //Atomic Table,  only used by Bios
319   USHORT SetDCEClock;                            //Atomic Table,  start from DCE11.1, shared by driver and VBIOS, change DISPCLK and DPREFCLK
320   USHORT GetMemoryClock;                         //Atomic Table,  directly used by various SW components,latest version 1.1
321   USHORT GetEngineClock;                         //Atomic Table,  directly used by various SW components,latest version 1.1
322   USHORT SetCRTC_UsingDTDTiming;                 //Atomic Table,  directly used by various SW components,latest version 1.1
323   USHORT ExternalEncoderControl;                 //Atomic Table,  directly used by various SW components,latest version 2.1
324   USHORT LVTMAOutputControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
325   USHORT VRAM_BlockDetectionByStrap;             //Atomic Table,  used only by Bios
326   USHORT MemoryCleanUp;                          //Atomic Table,  only used by Bios
327   USHORT ProcessI2cChannelTransaction;           //Function Table,only used by Bios
328   USHORT WriteOneByteToHWAssistedI2C;            //Function Table,indirectly used by various SW components
329   USHORT ReadHWAssistedI2CStatus;                //Atomic Table,  indirectly used by various SW components
330   USHORT SpeedFanControl;                        //Function Table,indirectly used by various SW components,called from ASIC_Init
331   USHORT PowerConnectorDetection;                //Atomic Table,  directly used by various SW components,latest version 1.1
332   USHORT MC_Synchronization;                     //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
333   USHORT ComputeMemoryEnginePLL;                 //Atomic Table,  indirectly used by various SW components,called from SetMemory/EngineClock
334   USHORT Gfx_Init;                               //Atomic Table,  indirectly used by various SW components,called from SetMemory or SetEngineClock
335   USHORT VRAM_GetCurrentInfoBlock;               //Atomic Table,  used only by Bios
336   USHORT DynamicMemorySettings;                  //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
337   USHORT MemoryTraining;                         //Atomic Table,  used only by Bios
338   USHORT EnableSpreadSpectrumOnPPLL;             //Atomic Table,  directly used by various SW components,latest version 1.2
339   USHORT TMDSAOutputControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
340   USHORT SetVoltage;                             //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
341   USHORT DAC1OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1
342   USHORT ReadEfuseValue;                         //Atomic Table,  directly used by various SW components,latest version 1.1
343   USHORT ComputeMemoryClockParam;                //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
344   USHORT ClockSource;                            //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
345   USHORT MemoryDeviceInit;                       //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
346   USHORT GetDispObjectInfo;                      //Atomic Table,  indirectly used by various SW components,called from EnableVGARender
347   USHORT DIG1EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
348   USHORT DIG2EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
349   USHORT DIG1TransmitterControl;                 //Atomic Table,directly used by various SW components,latest version 1.1
350   USHORT DIG2TransmitterControl;                 //Atomic Table,directly used by various SW components,latest version 1.1
351   USHORT ProcessAuxChannelTransaction;           //Function Table,only used by Bios
352   USHORT DPEncoderService;                       //Function Table,only used by Bios
353   USHORT GetVoltageInfo;                         //Function Table,only used by Bios since SI
354 }ATOM_MASTER_LIST_OF_COMMAND_TABLES;
355 
356 // For backward compatible
357 #define ReadEDIDFromHWAssistedI2C                ProcessI2cChannelTransaction
358 #define DPTranslatorControl                      DIG2EncoderControl
359 #define UNIPHYTransmitterControl                 DIG1TransmitterControl
360 #define LVTMATransmitterControl                  DIG2TransmitterControl
361 #define SetCRTC_DPM_State                        GetConditionalGoldenSetting
362 #define ASIC_StaticPwrMgtStatusChange            SetUniphyInstance
363 #define HPDInterruptService                      ReadHWAssistedI2CStatus
364 #define EnableVGA_Access                         GetSCLKOverMCLKRatio
365 #define EnableYUV                                GetDispObjectInfo
366 #define DynamicClockGating                       EnableDispPowerGating
367 #define SetupHWAssistedI2CStatus                 ComputeMemoryClockParam
368 #define DAC2OutputControl                        ReadEfuseValue
369 
370 #define TMDSAEncoderControl                      PatchMCSetting
371 #define LVDSEncoderControl                       MC_SEQ_Control
372 #define LCD1OutputControl                        HW_Misc_Operation
373 #define TV1OutputControl                         Gfx_Harvesting
374 #define TVEncoderControl                         SMC_Init
375 #define EnableHW_IconCursor                      SetDCEClock
376 #define SetCRTC_Replication                      GetSMUClockInfo
377 
378 #define MemoryRefreshConversion                  Gfx_Init
379 
380 typedef struct _ATOM_MASTER_COMMAND_TABLE
381 {
382   ATOM_COMMON_TABLE_HEADER           sHeader;
383   ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
384 }ATOM_MASTER_COMMAND_TABLE;
385 
386 /****************************************************************************/
387 // Structures used in every command table
388 /****************************************************************************/
389 typedef struct _ATOM_TABLE_ATTRIBUTE
390 {
391 #if ATOM_BIG_ENDIAN
392   USHORT  UpdatedByUtility:1;         //[15]=Table updated by utility flag
393   USHORT  PS_SizeInBytes:7;           //[14:8]=Size of parameter space in Bytes (multiple of a dword),
394   USHORT  WS_SizeInBytes:8;           //[7:0]=Size of workspace in Bytes (in multiple of a dword),
395 #else
396   USHORT  WS_SizeInBytes:8;           //[7:0]=Size of workspace in Bytes (in multiple of a dword),
397   USHORT  PS_SizeInBytes:7;           //[14:8]=Size of parameter space in Bytes (multiple of a dword),
398   USHORT  UpdatedByUtility:1;         //[15]=Table updated by utility flag
399 #endif
400 }ATOM_TABLE_ATTRIBUTE;
401 
402 /****************************************************************************/
403 // Common header for all command tables.
404 // Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header.
405 // And the pointer actually points to this header.
406 /****************************************************************************/
407 typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
408 {
409   ATOM_COMMON_TABLE_HEADER CommonHeader;
410   ATOM_TABLE_ATTRIBUTE     TableAttribute;
411 }ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;
412 
413 /****************************************************************************/
414 // Structures used by ComputeMemoryEnginePLLTable
415 /****************************************************************************/
416 
417 #define COMPUTE_MEMORY_PLL_PARAM        1
418 #define COMPUTE_ENGINE_PLL_PARAM        2
419 #define ADJUST_MC_SETTING_PARAM         3
420 
421 /****************************************************************************/
422 // Structures used by AdjustMemoryControllerTable
423 /****************************************************************************/
424 typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ
425 {
426 #if ATOM_BIG_ENDIAN
427   ULONG ulPointerReturnFlag:1;      // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
428   ULONG ulMemoryModuleNumber:7;     // BYTE_3[6:0]
429   ULONG ulClockFreq:24;
430 #else
431   ULONG ulClockFreq:24;
432   ULONG ulMemoryModuleNumber:7;     // BYTE_3[6:0]
433   ULONG ulPointerReturnFlag:1;      // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
434 #endif
435 }ATOM_ADJUST_MEMORY_CLOCK_FREQ;
436 #define POINTER_RETURN_FLAG             0x80
437 
438 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
439 {
440   ULONG   ulClock;        //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div
441   UCHAR   ucAction;       //0:reserved //1:Memory //2:Engine
442   UCHAR   ucReserved;     //may expand to return larger Fbdiv later
443   UCHAR   ucFbDiv;        //return value
444   UCHAR   ucPostDiv;      //return value
445 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;
446 
447 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2
448 {
449   ULONG   ulClock;        //When return, [23:0] return real clock
450   UCHAR   ucAction;       //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register
451   USHORT  usFbDiv;          //return Feedback value to be written to register
452   UCHAR   ucPostDiv;      //return post div to be written to register
453 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
454 
455 #define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
456 
457 #define SET_CLOCK_FREQ_MASK                       0x00FFFFFF  //Clock change tables only take bit [23:0] as the requested clock value
458 #define USE_NON_BUS_CLOCK_MASK                    0x01000000  //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
459 #define USE_MEMORY_SELF_REFRESH_MASK              0x02000000   //Only applicable to memory clock change, when set, using memory self refresh during clock transition
460 #define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE     0x04000000  //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
461 #define FIRST_TIME_CHANGE_CLOCK                   0x08000000   //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
462 #define SKIP_SW_PROGRAM_PLL                       0x10000000   //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
463 #define USE_SS_ENABLED_PIXEL_CLOCK                USE_NON_BUS_CLOCK_MASK
464 
465 #define b3USE_NON_BUS_CLOCK_MASK                  0x01       //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
466 #define b3USE_MEMORY_SELF_REFRESH                 0x02        //Only applicable to memory clock change, when set, using memory self refresh during clock transition
467 #define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE   0x04       //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
468 #define b3FIRST_TIME_CHANGE_CLOCK                 0x08       //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
469 #define b3SKIP_SW_PROGRAM_PLL                     0x10       //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
470 #define b3DRAM_SELF_REFRESH_EXIT                  0x20       //Applicable to DRAM self refresh exit only. when set, it means it will go to program DRAM self refresh exit path
471 #define b3SRIOV_INIT_BOOT                         0x40       //Use by HV GPU driver only, to load uCode. for ASIC_InitTable SCLK parameter only
472 #define b3SRIOV_LOAD_UCODE                        0x40       //Use by HV GPU driver only, to load uCode. for ASIC_InitTable SCLK parameter only
473 #define b3SRIOV_SKIP_ASIC_INIT                    0x02       //Use by HV GPU driver only, skip ASIC_Init for primary adapter boot. for ASIC_InitTable SCLK parameter only
474 
475 typedef struct _ATOM_COMPUTE_CLOCK_FREQ
476 {
477 #if ATOM_BIG_ENDIAN
478   ULONG ulComputeClockFlag:8;                 // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
479   ULONG ulClockFreq:24;                       // in unit of 10kHz
480 #else
481   ULONG ulClockFreq:24;                       // in unit of 10kHz
482   ULONG ulComputeClockFlag:8;                 // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
483 #endif
484 }ATOM_COMPUTE_CLOCK_FREQ;
485 
486 typedef struct _ATOM_S_MPLL_FB_DIVIDER
487 {
488   USHORT usFbDivFrac;
489   USHORT usFbDiv;
490 }ATOM_S_MPLL_FB_DIVIDER;
491 
492 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3
493 {
494   union
495   {
496     ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
497     ULONG ulClockParams;                      //ULONG access for BE
498     ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output Parameter
499   };
500   UCHAR   ucRefDiv;                           //Output Parameter
501   UCHAR   ucPostDiv;                          //Output Parameter
502   UCHAR   ucCntlFlag;                         //Output Parameter
503   UCHAR   ucReserved;
504 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;
505 
506 // ucCntlFlag
507 #define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN          1
508 #define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE            2
509 #define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE         4
510 #define ATOM_PLL_CNTL_FLAG_SPLL_ISPARE_9                  8
511 
512 
513 // V4 are only used for APU which PLL outside GPU
514 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4
515 {
516 #if ATOM_BIG_ENDIAN
517   ULONG  ucPostDiv:8;        //return parameter: post divider which is used to program to register directly
518   ULONG  ulClock:24;         //Input= target clock, output = actual clock
519 #else
520   ULONG  ulClock:24;         //Input= target clock, output = actual clock
521   ULONG  ucPostDiv:8;        //return parameter: post divider which is used to program to register directly
522 #endif
523 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4;
524 
525 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
526 {
527   union
528   {
529     ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
530     ULONG ulClockParams;                      //ULONG access for BE
531     ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output Parameter
532   };
533   UCHAR   ucRefDiv;                           //Output Parameter
534   UCHAR   ucPostDiv;                          //Output Parameter
535   union
536   {
537     UCHAR   ucCntlFlag;                       //Output Flags
538     UCHAR   ucInputFlag;                      //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode
539   };
540   UCHAR   ucReserved;
541 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5;
542 
543 
544 typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6
545 {
546   ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
547   ULONG   ulReserved[2];
548 }COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6;
549 
550 //ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag
551 #define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK            0x0f
552 #define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK           0x00
553 #define COMPUTE_GPUCLK_INPUT_FLAG_SCLK                     0x01
554 
555 
556 typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6
557 {
558   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4  ulClock;         //Output Parameter: ucPostDiv=DFS divider
559   ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output Parameter: PLL FB divider
560   UCHAR   ucPllRefDiv;                      //Output Parameter: PLL ref divider
561   UCHAR   ucPllPostDiv;                     //Output Parameter: PLL post divider
562   UCHAR   ucPllCntlFlag;                    //Output Flags: control flag
563   UCHAR   ucReserved;
564 }COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6;
565 
566 //ucPllCntlFlag
567 #define SPLL_CNTL_FLAG_VCO_MODE_MASK            0x03
568 
569 typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_7
570 {
571   ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
572   ULONG   ulReserved[5];
573 }COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_7;
574 
575 //ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag
576 #define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK            0x0f
577 #define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK           0x00
578 #define COMPUTE_GPUCLK_INPUT_FLAG_SCLK                     0x01
579 
580 typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_7
581 {
582   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4  ulClock;         //Output Parameter: ucPostDiv=DFS divider
583   USHORT  usSclk_fcw_frac;                  //fractional divider of fcw = usSclk_fcw_frac/65536
584   USHORT  usSclk_fcw_int;                   //integer divider of fcwc
585   UCHAR   ucSclkPostDiv;                    //PLL post divider = 2^ucSclkPostDiv
586   UCHAR   ucSclkVcoMode;                    //0: 4G~8Ghz, 1:3G~6Ghz,3: 2G~4Ghz, 2:Reserved
587   UCHAR   ucSclkPllRange;                   //GreenTable SCLK PLL range entry index ( 0~7 )
588   UCHAR   ucSscEnable;
589   USHORT  usSsc_fcw1_frac;                  //fcw1_frac when SSC enable
590   USHORT  usSsc_fcw1_int;                   //fcw1_int when SSC enable
591   USHORT  usReserved;
592   USHORT  usPcc_fcw_int;
593   USHORT  usSsc_fcw_slew_frac;              //fcw_slew_frac when SSC enable
594   USHORT  usPcc_fcw_slew_frac;
595 }COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_7;
596 
597 // ucInputFlag
598 #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN  1   // 1-StrobeMode, 0-PerformanceMode
599 
600 // use for ComputeMemoryClockParamTable
601 typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1
602 {
603   union
604   {
605     ULONG  ulClock;
606     ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output:UPPER_WORD=FB_DIV_INTEGER,  LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS)
607   };
608   UCHAR   ucDllSpeed;                         //Output
609   UCHAR   ucPostDiv;                          //Output
610   union{
611     UCHAR   ucInputFlag;                      //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode
612     UCHAR   ucPllCntlFlag;                    //Output:
613   };
614   UCHAR   ucBWCntl;
615 }COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1;
616 
617 // definition of ucInputFlag
618 #define MPLL_INPUT_FLAG_STROBE_MODE_EN          0x01
619 // definition of ucPllCntlFlag
620 #define MPLL_CNTL_FLAG_VCO_MODE_MASK            0x03
621 #define MPLL_CNTL_FLAG_BYPASS_DQ_PLL            0x04
622 #define MPLL_CNTL_FLAG_QDR_ENABLE               0x08
623 #define MPLL_CNTL_FLAG_AD_HALF_RATE             0x10
624 
625 //MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL
626 #define MPLL_CNTL_FLAG_BYPASS_AD_PLL            0x04
627 
628 // use for ComputeMemoryClockParamTable
629 typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_2
630 {
631   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 ulClock;
632   ULONG ulReserved;
633 }COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_2;
634 
635 typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_3
636 {
637   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 ulClock;
638   USHORT  usMclk_fcw_frac;                  //fractional divider of fcw = usSclk_fcw_frac/65536
639   USHORT  usMclk_fcw_int;                   //integer divider of fcwc
640 }COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_3;
641 
642 //Input parameter of DynamicMemorySettingsTable
643 //when ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag = COMPUTE_MEMORY_PLL_PARAM
644 typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
645 {
646   ATOM_COMPUTE_CLOCK_FREQ ulClock;
647   ULONG ulReserved[2];
648 }DYNAMICE_MEMORY_SETTINGS_PARAMETER;
649 
650 //Input parameter of DynamicMemorySettingsTable
651 //when ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag == COMPUTE_ENGINE_PLL_PARAM
652 typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER
653 {
654   ATOM_COMPUTE_CLOCK_FREQ ulClock;
655   ULONG ulMemoryClock;
656   ULONG ulReserved;
657 }DYNAMICE_ENGINE_SETTINGS_PARAMETER;
658 
659 //Input parameter of DynamicMemorySettingsTable ver2.1 and above
660 //when ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag == ADJUST_MC_SETTING_PARAM
661 typedef struct _DYNAMICE_MC_DPM_SETTINGS_PARAMETER
662 {
663   ATOM_COMPUTE_CLOCK_FREQ ulClock;
664   UCHAR ucMclkDPMState;
665   UCHAR ucReserved[3];
666   ULONG ulReserved;
667 }DYNAMICE_MC_DPM_SETTINGS_PARAMETER;
668 
669 //ucMclkDPMState
670 #define DYNAMIC_MC_DPM_SETTING_LOW_DPM_STATE       0
671 #define DYNAMIC_MC_DPM_SETTING_MEDIUM_DPM_STATE    1
672 #define DYNAMIC_MC_DPM_SETTING_HIGH_DPM_STATE      2
673 
674 typedef union _DYNAMICE_MEMORY_SETTINGS_PARAMETER_V2_1
675 {
676   DYNAMICE_MEMORY_SETTINGS_PARAMETER asMCReg;
677   DYNAMICE_ENGINE_SETTINGS_PARAMETER asMCArbReg;
678   DYNAMICE_MC_DPM_SETTINGS_PARAMETER asDPMMCReg;
679 }DYNAMICE_MEMORY_SETTINGS_PARAMETER_V2_1;
680 
681 
682 /****************************************************************************/
683 // Structures used by SetEngineClockTable
684 /****************************************************************************/
685 typedef struct _SET_ENGINE_CLOCK_PARAMETERS
686 {
687   ULONG ulTargetEngineClock;          //In 10Khz unit
688 }SET_ENGINE_CLOCK_PARAMETERS;
689 
690 typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION
691 {
692   ULONG ulTargetEngineClock;          //In 10Khz unit
693   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
694 }SET_ENGINE_CLOCK_PS_ALLOCATION;
695 
696 typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION_V1_2
697 {
698   ULONG ulTargetEngineClock;          //In 10Khz unit
699   COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_7 sReserved;
700 }SET_ENGINE_CLOCK_PS_ALLOCATION_V1_2;
701 
702 
703 /****************************************************************************/
704 // Structures used by SetMemoryClockTable
705 /****************************************************************************/
706 typedef struct _SET_MEMORY_CLOCK_PARAMETERS
707 {
708   ULONG ulTargetMemoryClock;          //In 10Khz unit
709 }SET_MEMORY_CLOCK_PARAMETERS;
710 
711 typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION
712 {
713   ULONG ulTargetMemoryClock;          //In 10Khz unit
714   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
715 }SET_MEMORY_CLOCK_PS_ALLOCATION;
716 
717 /****************************************************************************/
718 // Structures used by ASIC_Init.ctb
719 /****************************************************************************/
720 typedef struct _ASIC_INIT_PARAMETERS
721 {
722   ULONG ulDefaultEngineClock;         //In 10Khz unit
723   ULONG ulDefaultMemoryClock;         //In 10Khz unit
724 }ASIC_INIT_PARAMETERS;
725 
726 typedef struct _ASIC_INIT_PS_ALLOCATION
727 {
728   ASIC_INIT_PARAMETERS sASICInitClocks;
729   SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure
730 }ASIC_INIT_PS_ALLOCATION;
731 
732 typedef struct _ASIC_INIT_CLOCK_PARAMETERS
733 {
734   ULONG ulClkFreqIn10Khz:24;
735   ULONG ucClkFlag:8;
736 }ASIC_INIT_CLOCK_PARAMETERS;
737 
738 typedef struct _ASIC_INIT_PARAMETERS_V1_2
739 {
740   ASIC_INIT_CLOCK_PARAMETERS asSclkClock;         //In 10Khz unit
741   ASIC_INIT_CLOCK_PARAMETERS asMemClock;          //In 10Khz unit
742 }ASIC_INIT_PARAMETERS_V1_2;
743 
744 typedef struct _ASIC_INIT_PS_ALLOCATION_V1_2
745 {
746   ASIC_INIT_PARAMETERS_V1_2 sASICInitClocks;
747   ULONG ulReserved[8];
748 }ASIC_INIT_PS_ALLOCATION_V1_2;
749 
750 /****************************************************************************/
751 // Structure used by DynamicClockGatingTable.ctb
752 /****************************************************************************/
753 typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
754 {
755   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
756   UCHAR ucPadding[3];
757 }DYNAMIC_CLOCK_GATING_PARAMETERS;
758 #define  DYNAMIC_CLOCK_GATING_PS_ALLOCATION  DYNAMIC_CLOCK_GATING_PARAMETERS
759 
760 /****************************************************************************/
761 // Structure used by EnableDispPowerGatingTable.ctb
762 /****************************************************************************/
763 typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1
764 {
765   UCHAR ucDispPipeId;                 // ATOM_CRTC1, ATOM_CRTC2, ...
766   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
767   UCHAR ucPadding[2];
768 }ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1;
769 
770 typedef struct _ENABLE_DISP_POWER_GATING_PS_ALLOCATION
771 {
772   UCHAR ucDispPipeId;                 // ATOM_CRTC1, ATOM_CRTC2, ...
773   UCHAR ucEnable;                     // ATOM_ENABLE/ATOM_DISABLE/ATOM_INIT
774   UCHAR ucPadding[2];
775   ULONG ulReserved[4];
776 }ENABLE_DISP_POWER_GATING_PS_ALLOCATION;
777 
778 /****************************************************************************/
779 // Structure used by EnableASIC_StaticPwrMgtTable.ctb
780 /****************************************************************************/
781 typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
782 {
783   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
784   UCHAR ucPadding[3];
785 }ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
786 #define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION  ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
787 
788 /****************************************************************************/
789 // Structures used by DAC_LoadDetectionTable.ctb
790 /****************************************************************************/
791 typedef struct _DAC_LOAD_DETECTION_PARAMETERS
792 {
793   USHORT usDeviceID;                  //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT}
794   UCHAR  ucDacType;                   //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC}
795   UCHAR  ucMisc;                                 //Valid only when table revision =1.3 and above
796 }DAC_LOAD_DETECTION_PARAMETERS;
797 
798 // DAC_LOAD_DETECTION_PARAMETERS.ucMisc
799 #define DAC_LOAD_MISC_YPrPb                  0x01
800 
801 typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION
802 {
803   DAC_LOAD_DETECTION_PARAMETERS            sDacload;
804   ULONG                                    Reserved[2];// Don't set this one, allocation for EXT DAC
805 }DAC_LOAD_DETECTION_PS_ALLOCATION;
806 
807 /****************************************************************************/
808 // Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb
809 /****************************************************************************/
810 typedef struct _DAC_ENCODER_CONTROL_PARAMETERS
811 {
812   USHORT usPixelClock;                // in 10KHz; for bios convenient
813   UCHAR  ucDacStandard;               // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0)
814   UCHAR  ucAction;                    // 0: turn off encoder
815                                       // 1: setup and turn on encoder
816                                       // 7: ATOM_ENCODER_INIT Initialize DAC
817 }DAC_ENCODER_CONTROL_PARAMETERS;
818 
819 #define DAC_ENCODER_CONTROL_PS_ALLOCATION  DAC_ENCODER_CONTROL_PARAMETERS
820 
821 /****************************************************************************/
822 // Structures used by DIG1EncoderControlTable
823 //                    DIG2EncoderControlTable
824 //                    ExternalEncoderControlTable
825 /****************************************************************************/
826 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
827 {
828   USHORT usPixelClock;      // in 10KHz; for bios convenient
829   UCHAR  ucConfig;
830                             // [2] Link Select:
831                             // =0: PHY linkA if bfLane<3
832                             // =1: PHY linkB if bfLanes<3
833                             // =0: PHY linkA+B if bfLanes=3
834                             // [3] Transmitter Sel
835                             // =0: UNIPHY or PCIEPHY
836                             // =1: LVTMA
837   UCHAR ucAction;           // =0: turn off encoder
838                             // =1: turn on encoder
839   UCHAR ucEncoderMode;
840                             // =0: DP   encoder
841                             // =1: LVDS encoder
842                             // =2: DVI  encoder
843                             // =3: HDMI encoder
844                             // =4: SDVO encoder
845   UCHAR ucLaneNum;          // how many lanes to enable
846   UCHAR ucReserved[2];
847 }DIG_ENCODER_CONTROL_PARAMETERS;
848 #define DIG_ENCODER_CONTROL_PS_ALLOCATION             DIG_ENCODER_CONTROL_PARAMETERS
849 #define EXTERNAL_ENCODER_CONTROL_PARAMETER            DIG_ENCODER_CONTROL_PARAMETERS
850 
851 //ucConfig
852 #define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK           0x01
853 #define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ        0x00
854 #define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ        0x01
855 #define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ        0x02
856 #define ATOM_ENCODER_CONFIG_LINK_SEL_MASK             0x04
857 #define ATOM_ENCODER_CONFIG_LINKA                     0x00
858 #define ATOM_ENCODER_CONFIG_LINKB                     0x04
859 #define ATOM_ENCODER_CONFIG_LINKA_B                   ATOM_TRANSMITTER_CONFIG_LINKA
860 #define ATOM_ENCODER_CONFIG_LINKB_A                   ATOM_ENCODER_CONFIG_LINKB
861 #define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK      0x08
862 #define ATOM_ENCODER_CONFIG_UNIPHY                    0x00
863 #define ATOM_ENCODER_CONFIG_LVTMA                     0x08
864 #define ATOM_ENCODER_CONFIG_TRANSMITTER1              0x00
865 #define ATOM_ENCODER_CONFIG_TRANSMITTER2              0x08
866 #define ATOM_ENCODER_CONFIG_DIGB                      0x80         // VBIOS Internal use, outside SW should set this bit=0
867 // ucAction
868 // ATOM_ENABLE:  Enable Encoder
869 // ATOM_DISABLE: Disable Encoder
870 
871 //ucEncoderMode
872 #define ATOM_ENCODER_MODE_DP                          0
873 #define ATOM_ENCODER_MODE_LVDS                        1
874 #define ATOM_ENCODER_MODE_DVI                         2
875 #define ATOM_ENCODER_MODE_HDMI                        3
876 #define ATOM_ENCODER_MODE_SDVO                        4
877 #define ATOM_ENCODER_MODE_DP_AUDIO                    5
878 #define ATOM_ENCODER_MODE_TV                          13
879 #define ATOM_ENCODER_MODE_CV                          14
880 #define ATOM_ENCODER_MODE_CRT                         15
881 #define ATOM_ENCODER_MODE_DVO                         16
882 #define ATOM_ENCODER_MODE_DP_SST                      ATOM_ENCODER_MODE_DP    // For DP1.2
883 #define ATOM_ENCODER_MODE_DP_MST                      5                       // For DP1.2
884 
885 
886 typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
887 {
888 #if ATOM_BIG_ENDIAN
889     UCHAR ucReserved1:2;
890     UCHAR ucTransmitterSel:2;     // =0: UniphyAB, =1: UniphyCD  =2: UniphyEF
891     UCHAR ucLinkSel:1;            // =0: linkA/C/E =1: linkB/D/F
892     UCHAR ucReserved:1;
893     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
894 #else
895     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
896     UCHAR ucReserved:1;
897     UCHAR ucLinkSel:1;            // =0: linkA/C/E =1: linkB/D/F
898     UCHAR ucTransmitterSel:2;     // =0: UniphyAB, =1: UniphyCD  =2: UniphyEF
899     UCHAR ucReserved1:2;
900 #endif
901 }ATOM_DIG_ENCODER_CONFIG_V2;
902 
903 
904 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
905 {
906   USHORT usPixelClock;      // in 10KHz; for bios convenient
907   ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
908   UCHAR ucAction;
909   UCHAR ucEncoderMode;
910                             // =0: DP   encoder
911                             // =1: LVDS encoder
912                             // =2: DVI  encoder
913                             // =3: HDMI encoder
914                             // =4: SDVO encoder
915   UCHAR ucLaneNum;          // how many lanes to enable
916   UCHAR ucStatus;           // = DP_LINK_TRAINING_COMPLETE or DP_LINK_TRAINING_INCOMPLETE, only used by VBIOS with command ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS
917   UCHAR ucReserved;
918 }DIG_ENCODER_CONTROL_PARAMETERS_V2;
919 
920 //ucConfig
921 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK            0x01
922 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ        0x00
923 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ        0x01
924 #define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK              0x04
925 #define ATOM_ENCODER_CONFIG_V2_LINKA                          0x00
926 #define ATOM_ENCODER_CONFIG_V2_LINKB                          0x04
927 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK     0x18
928 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1                0x00
929 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2                0x08
930 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3                0x10
931 
932 // ucAction:
933 // ATOM_DISABLE
934 // ATOM_ENABLE
935 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START       0x08
936 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1    0x09
937 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2    0x0a
938 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3    0x13
939 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE    0x0b
940 #define ATOM_ENCODER_CMD_DP_VIDEO_OFF                 0x0c
941 #define ATOM_ENCODER_CMD_DP_VIDEO_ON                  0x0d
942 #define ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS    0x0e
943 #define ATOM_ENCODER_CMD_SETUP                        0x0f
944 #define ATOM_ENCODER_CMD_SETUP_PANEL_MODE            0x10
945 
946 // New Command for DIGxEncoderControlTable v1.5
947 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN4    0x14
948 #define ATOM_ENCODER_CMD_STREAM_SETUP                 0x0F      //change name ATOM_ENCODER_CMD_SETUP
949 #define ATOM_ENCODER_CMD_LINK_SETUP                   0x11      //internal use, called by other Command Table
950 #define ATOM_ENCODER_CMD_ENCODER_BLANK                0x12      //internal use, called by other Command Table
951 
952 // ucStatus
953 #define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE    0x10
954 #define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE  0x00
955 
956 //ucTableFormatRevision=1
957 //ucTableContentRevision=3
958 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
959 typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
960 {
961 #if ATOM_BIG_ENDIAN
962     UCHAR ucReserved1:1;
963     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
964     UCHAR ucReserved:3;
965     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
966 #else
967     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
968     UCHAR ucReserved:3;
969     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
970     UCHAR ucReserved1:1;
971 #endif
972 }ATOM_DIG_ENCODER_CONFIG_V3;
973 
974 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK            0x03
975 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ        0x00
976 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ        0x01
977 #define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL                 0x70
978 #define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER                 0x00
979 #define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER                 0x10
980 #define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER                 0x20
981 #define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER                 0x30
982 #define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER                 0x40
983 #define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER                 0x50
984 
985 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
986 {
987   USHORT usPixelClock;      // in 10KHz; for bios convenient
988   ATOM_DIG_ENCODER_CONFIG_V3 acConfig;
989   UCHAR ucAction;
990   union{
991     UCHAR ucEncoderMode;
992                             // =0: DP   encoder
993                             // =1: LVDS encoder
994                             // =2: DVI  encoder
995                             // =3: HDMI encoder
996                             // =4: SDVO encoder
997                             // =5: DP audio
998     UCHAR ucPanelMode;        // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
999                             // =0:     external DP
1000                             // =0x1:   internal DP2
1001                             // =0x11:  internal DP1 for NutMeg/Travis DP translator
1002   };
1003   UCHAR ucLaneNum;          // how many lanes to enable
1004   UCHAR ucBitPerColor;      // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
1005   UCHAR ucReserved;
1006 }DIG_ENCODER_CONTROL_PARAMETERS_V3;
1007 
1008 //ucTableFormatRevision=1
1009 //ucTableContentRevision=4
1010 // start from NI
1011 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
1012 typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
1013 {
1014 #if ATOM_BIG_ENDIAN
1015     UCHAR ucReserved1:1;
1016     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
1017     UCHAR ucReserved:2;
1018     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
1019 #else
1020     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
1021     UCHAR ucReserved:2;
1022     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
1023     UCHAR ucReserved1:1;
1024 #endif
1025 }ATOM_DIG_ENCODER_CONFIG_V4;
1026 
1027 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK            0x03
1028 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ        0x00
1029 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ        0x01
1030 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ        0x02
1031 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ        0x03
1032 #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL                 0x70
1033 #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER                 0x00
1034 #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER                 0x10
1035 #define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER                 0x20
1036 #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER                 0x30
1037 #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER                 0x40
1038 #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER                 0x50
1039 #define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER                 0x60
1040 
1041 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
1042 {
1043   USHORT usPixelClock;      // in 10KHz; for bios convenient
1044   union{
1045   ATOM_DIG_ENCODER_CONFIG_V4 acConfig;
1046   UCHAR ucConfig;
1047   };
1048   UCHAR ucAction;
1049   union{
1050     UCHAR ucEncoderMode;
1051                             // =0: DP   encoder
1052                             // =1: LVDS encoder
1053                             // =2: DVI  encoder
1054                             // =3: HDMI encoder
1055                             // =4: SDVO encoder
1056                             // =5: DP audio
1057     UCHAR ucPanelMode;      // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
1058                             // =0:     external DP
1059                             // =0x1:   internal DP2
1060                             // =0x11:  internal DP1 for NutMeg/Travis DP translator
1061   };
1062   UCHAR ucLaneNum;          // how many lanes to enable
1063   UCHAR ucBitPerColor;      // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
1064   UCHAR ucHPD_ID;           // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version
1065 }DIG_ENCODER_CONTROL_PARAMETERS_V4;
1066 
1067 // define ucBitPerColor:
1068 #define PANEL_BPC_UNDEFINE                               0x00
1069 #define PANEL_6BIT_PER_COLOR                             0x01
1070 #define PANEL_8BIT_PER_COLOR                             0x02
1071 #define PANEL_10BIT_PER_COLOR                            0x03
1072 #define PANEL_12BIT_PER_COLOR                            0x04
1073 #define PANEL_16BIT_PER_COLOR                            0x05
1074 
1075 //define ucPanelMode
1076 #define DP_PANEL_MODE_EXTERNAL_DP_MODE                   0x00
1077 #define DP_PANEL_MODE_INTERNAL_DP2_MODE                  0x01
1078 #define DP_PANEL_MODE_INTERNAL_DP1_MODE                  0x11
1079 
1080 
1081 typedef struct _ENCODER_STREAM_SETUP_PARAMETERS_V5
1082 {
1083   UCHAR ucDigId;           // 0~6 map to DIG0~DIG6
1084   UCHAR ucAction;          // =  ATOM_ENOCODER_CMD_STREAM_SETUP
1085   UCHAR ucDigMode;         // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI
1086   UCHAR ucLaneNum;         // Lane number
1087   ULONG ulPixelClock;      // Pixel Clock in 10Khz
1088   UCHAR ucBitPerColor;
1089   UCHAR ucLinkRateIn270Mhz;//= DP link rate/270Mhz, =6: 1.62G  = 10: 2.7G, =20: 5.4Ghz, =30: 8.1Ghz etc
1090   UCHAR ucReserved[2];
1091 }ENCODER_STREAM_SETUP_PARAMETERS_V5;
1092 
1093 typedef struct _ENCODER_LINK_SETUP_PARAMETERS_V5
1094 {
1095   UCHAR ucDigId;           // 0~6 map to DIG0~DIG6
1096   UCHAR ucAction;          // =  ATOM_ENOCODER_CMD_LINK_SETUP
1097   UCHAR ucDigMode;         // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI
1098   UCHAR ucLaneNum;         // Lane number
1099   ULONG ulSymClock;        // Symbol Clock in 10Khz
1100   UCHAR ucHPDSel;
1101   UCHAR ucDigEncoderSel;   // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable,
1102   UCHAR ucReserved[2];
1103 }ENCODER_LINK_SETUP_PARAMETERS_V5;
1104 
1105 typedef struct _DP_PANEL_MODE_SETUP_PARAMETERS_V5
1106 {
1107   UCHAR ucDigId;           // 0~6 map to DIG0~DIG6
1108   UCHAR ucAction;          // = ATOM_ENCODER_CMD_DPLINK_SETUP
1109   UCHAR ucPanelMode;       // =0:     external DP
1110                            // =0x1:   internal DP2
1111                            // =0x11:  internal DP1 NutMeg/Travis DP Translator
1112   UCHAR ucReserved;
1113   ULONG ulReserved[2];
1114 }DP_PANEL_MODE_SETUP_PARAMETERS_V5;
1115 
1116 typedef struct _ENCODER_GENERIC_CMD_PARAMETERS_V5
1117 {
1118   UCHAR ucDigId;           // 0~6 map to DIG0~DIG6
1119   UCHAR ucAction;          // = rest of generic encoder command which does not carry any parameters
1120   UCHAR ucReserved[2];
1121   ULONG ulReserved[2];
1122 }ENCODER_GENERIC_CMD_PARAMETERS_V5;
1123 
1124 //ucDigId
1125 #define ATOM_ENCODER_CONFIG_V5_DIG0_ENCODER                 0x00
1126 #define ATOM_ENCODER_CONFIG_V5_DIG1_ENCODER                 0x01
1127 #define ATOM_ENCODER_CONFIG_V5_DIG2_ENCODER                 0x02
1128 #define ATOM_ENCODER_CONFIG_V5_DIG3_ENCODER                 0x03
1129 #define ATOM_ENCODER_CONFIG_V5_DIG4_ENCODER                 0x04
1130 #define ATOM_ENCODER_CONFIG_V5_DIG5_ENCODER                 0x05
1131 #define ATOM_ENCODER_CONFIG_V5_DIG6_ENCODER                 0x06
1132 
1133 
1134 typedef union _DIG_ENCODER_CONTROL_PARAMETERS_V5
1135 {
1136   ENCODER_GENERIC_CMD_PARAMETERS_V5  asCmdParam;
1137   ENCODER_STREAM_SETUP_PARAMETERS_V5 asStreamParam;
1138   ENCODER_LINK_SETUP_PARAMETERS_V5  asLinkParam;
1139   DP_PANEL_MODE_SETUP_PARAMETERS_V5 asDPPanelModeParam;
1140 }DIG_ENCODER_CONTROL_PARAMETERS_V5;
1141 
1142 
1143 /****************************************************************************/
1144 // Structures used by UNIPHYTransmitterControlTable
1145 //                    LVTMATransmitterControlTable
1146 //                    DVOOutputControlTable
1147 /****************************************************************************/
1148 typedef struct _ATOM_DP_VS_MODE
1149 {
1150   UCHAR ucLaneSel;
1151   UCHAR ucLaneSet;
1152 }ATOM_DP_VS_MODE;
1153 
1154 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS
1155 {
1156    union
1157    {
1158   USHORT usPixelClock;      // in 10KHz; for bios convenient
1159    USHORT usInitInfo;         // when init uniphy,lower 8bit is used for connector type defined in objectid.h
1160   ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
1161    };
1162   UCHAR ucConfig;
1163                                        // [0]=0: 4 lane Link,
1164                                        //    =1: 8 lane Link ( Dual Links TMDS )
1165                           // [1]=0: InCoherent mode
1166                                        //    =1: Coherent Mode
1167                                        // [2] Link Select:
1168                                       // =0: PHY linkA   if bfLane<3
1169                                        // =1: PHY linkB   if bfLanes<3
1170                                       // =0: PHY linkA+B if bfLanes=3
1171                           // [5:4]PCIE lane Sel
1172                           // =0: lane 0~3 or 0~7
1173                           // =1: lane 4~7
1174                           // =2: lane 8~11 or 8~15
1175                           // =3: lane 12~15
1176    UCHAR ucAction;              // =0: turn off encoder
1177                            // =1: turn on encoder
1178   UCHAR ucReserved[4];
1179 }DIG_TRANSMITTER_CONTROL_PARAMETERS;
1180 
1181 #define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION      DIG_TRANSMITTER_CONTROL_PARAMETERS
1182 
1183 //ucInitInfo
1184 #define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK   0x00ff
1185 
1186 //ucConfig
1187 #define ATOM_TRANSMITTER_CONFIG_8LANE_LINK         0x01
1188 #define ATOM_TRANSMITTER_CONFIG_COHERENT            0x02
1189 #define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK      0x04
1190 #define ATOM_TRANSMITTER_CONFIG_LINKA                  0x00
1191 #define ATOM_TRANSMITTER_CONFIG_LINKB                  0x04
1192 #define ATOM_TRANSMITTER_CONFIG_LINKA_B               0x00
1193 #define ATOM_TRANSMITTER_CONFIG_LINKB_A               0x04
1194 
1195 #define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK   0x08         // only used when ATOM_TRANSMITTER_ACTION_ENABLE
1196 #define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER      0x00            // only used when ATOM_TRANSMITTER_ACTION_ENABLE
1197 #define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER      0x08            // only used when ATOM_TRANSMITTER_ACTION_ENABLE
1198 
1199 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK         0x30
1200 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL         0x00
1201 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE         0x20
1202 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN      0x30
1203 #define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK      0xc0
1204 #define ATOM_TRANSMITTER_CONFIG_LANE_0_3            0x00
1205 #define ATOM_TRANSMITTER_CONFIG_LANE_0_7            0x00
1206 #define ATOM_TRANSMITTER_CONFIG_LANE_4_7            0x40
1207 #define ATOM_TRANSMITTER_CONFIG_LANE_8_11            0x80
1208 #define ATOM_TRANSMITTER_CONFIG_LANE_8_15            0x80
1209 #define ATOM_TRANSMITTER_CONFIG_LANE_12_15         0xc0
1210 
1211 //ucAction
1212 #define ATOM_TRANSMITTER_ACTION_DISABLE                      0
1213 #define ATOM_TRANSMITTER_ACTION_ENABLE                      1
1214 #define ATOM_TRANSMITTER_ACTION_LCD_BLOFF                   2
1215 #define ATOM_TRANSMITTER_ACTION_LCD_BLON                   3
1216 #define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL  4
1217 #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START       5
1218 #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP          6
1219 #define ATOM_TRANSMITTER_ACTION_INIT                         7
1220 #define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT          8
1221 #define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT             9
1222 #define ATOM_TRANSMITTER_ACTION_SETUP                         10
1223 #define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH           11
1224 #define ATOM_TRANSMITTER_ACTION_POWER_ON               12
1225 #define ATOM_TRANSMITTER_ACTION_POWER_OFF              13
1226 
1227 // Following are used for DigTransmitterControlTable ver1.2
1228 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2
1229 {
1230 #if ATOM_BIG_ENDIAN
1231   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1232                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1233                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1234   UCHAR ucReserved:1;
1235   UCHAR fDPConnector:1;             //bit4=0: DP connector  =1: None DP connector
1236   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
1237   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1238                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1239 
1240   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1241   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1242 #else
1243   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1244   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1245   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1246                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1247   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
1248   UCHAR fDPConnector:1;             //bit4=0: DP connector  =1: None DP connector
1249   UCHAR ucReserved:1;
1250   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1251                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1252                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1253 #endif
1254 }ATOM_DIG_TRANSMITTER_CONFIG_V2;
1255 
1256 //ucConfig
1257 //Bit0
1258 #define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR         0x01
1259 
1260 //Bit1
1261 #define ATOM_TRANSMITTER_CONFIG_V2_COHERENT                      0x02
1262 
1263 //Bit2
1264 #define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK              0x04
1265 #define ATOM_TRANSMITTER_CONFIG_V2_LINKA                       0x00
1266 #define ATOM_TRANSMITTER_CONFIG_V2_LINKB                        0x04
1267 
1268 // Bit3
1269 #define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK           0x08
1270 #define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER                0x00            // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
1271 #define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER                0x08            // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
1272 
1273 // Bit4
1274 #define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR                 0x10
1275 
1276 // Bit7:6
1277 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK     0xC0
1278 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1              0x00   //AB
1279 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2              0x40   //CD
1280 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3              0x80   //EF
1281 
1282 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2
1283 {
1284    union
1285    {
1286   USHORT usPixelClock;      // in 10KHz; for bios convenient
1287    USHORT usInitInfo;         // when init uniphy,lower 8bit is used for connector type defined in objectid.h
1288   ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
1289    };
1290   ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
1291    UCHAR ucAction;              // define as ATOM_TRANSMITER_ACTION_XXX
1292   UCHAR ucReserved[4];
1293 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;
1294 
1295 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3
1296 {
1297 #if ATOM_BIG_ENDIAN
1298   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1299                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1300                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1301   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
1302   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1303   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1304                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1305   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1306   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1307 #else
1308   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1309   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1310   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1311                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1312   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1313   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
1314   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1315                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1316                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1317 #endif
1318 }ATOM_DIG_TRANSMITTER_CONFIG_V3;
1319 
1320 
1321 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
1322 {
1323    union
1324    {
1325     USHORT usPixelClock;      // in 10KHz; for bios convenient
1326      USHORT usInitInfo;         // when init uniphy,lower 8bit is used for connector type defined in objectid.h
1327     ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
1328    };
1329   ATOM_DIG_TRANSMITTER_CONFIG_V3 acConfig;
1330    UCHAR ucAction;                // define as ATOM_TRANSMITER_ACTION_XXX
1331   UCHAR ucLaneNum;
1332   UCHAR ucReserved[3];
1333 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V3;
1334 
1335 //ucConfig
1336 //Bit0
1337 #define ATOM_TRANSMITTER_CONFIG_V3_DUAL_LINK_CONNECTOR         0x01
1338 
1339 //Bit1
1340 #define ATOM_TRANSMITTER_CONFIG_V3_COHERENT                      0x02
1341 
1342 //Bit2
1343 #define ATOM_TRANSMITTER_CONFIG_V3_LINK_SEL_MASK              0x04
1344 #define ATOM_TRANSMITTER_CONFIG_V3_LINKA                       0x00
1345 #define ATOM_TRANSMITTER_CONFIG_V3_LINKB                        0x04
1346 
1347 // Bit3
1348 #define ATOM_TRANSMITTER_CONFIG_V3_ENCODER_SEL_MASK           0x08
1349 #define ATOM_TRANSMITTER_CONFIG_V3_DIG1_ENCODER                0x00
1350 #define ATOM_TRANSMITTER_CONFIG_V3_DIG2_ENCODER                0x08
1351 
1352 // Bit5:4
1353 #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SEL_MASK            0x30
1354 #define ATOM_TRASMITTER_CONFIG_V3_P1PLL                        0x00
1355 #define ATOM_TRASMITTER_CONFIG_V3_P2PLL                        0x10
1356 #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SRC_EXT            0x20
1357 
1358 // Bit7:6
1359 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER_SEL_MASK     0xC0
1360 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER1              0x00   //AB
1361 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2              0x40   //CD
1362 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3              0x80   //EF
1363 
1364 
1365 /****************************************************************************/
1366 // Structures used by UNIPHYTransmitterControlTable V1.4
1367 // ASIC Families: NI
1368 // ucTableFormatRevision=1
1369 // ucTableContentRevision=4
1370 /****************************************************************************/
1371 typedef struct _ATOM_DP_VS_MODE_V4
1372 {
1373   UCHAR ucLaneSel;
1374  	union
1375 	{
1376  	  UCHAR ucLaneSet;
1377  	  struct {
1378 #if ATOM_BIG_ENDIAN
1379  		  UCHAR ucPOST_CURSOR2:2;         //Bit[7:6] Post Cursor2 Level      <= New in V4
1380  		  UCHAR ucPRE_EMPHASIS:3;         //Bit[5:3] Pre-emphasis Level
1381  		  UCHAR ucVOLTAGE_SWING:3;        //Bit[2:0] Voltage Swing Level
1382 #else
1383  		  UCHAR ucVOLTAGE_SWING:3;        //Bit[2:0] Voltage Swing Level
1384  		  UCHAR ucPRE_EMPHASIS:3;         //Bit[5:3] Pre-emphasis Level
1385  		  UCHAR ucPOST_CURSOR2:2;         //Bit[7:6] Post Cursor2 Level      <= New in V4
1386 #endif
1387 		};
1388 	};
1389 }ATOM_DP_VS_MODE_V4;
1390 
1391 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4
1392 {
1393 #if ATOM_BIG_ENDIAN
1394   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1395                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1396                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1397   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3   <= New
1398   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1399   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1400                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1401   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1402   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1403 #else
1404   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1405   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1406   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1407                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1408   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1409   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3   <= New
1410   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1411                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1412                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1413 #endif
1414 }ATOM_DIG_TRANSMITTER_CONFIG_V4;
1415 
1416 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
1417 {
1418   union
1419   {
1420     USHORT usPixelClock;      // in 10KHz; for bios convenient
1421     USHORT usInitInfo;         // when init uniphy,lower 8bit is used for connector type defined in objectid.h
1422     ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode     Redefined comparing to previous version
1423   };
1424   union
1425   {
1426   ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig;
1427   UCHAR ucConfig;
1428   };
1429   UCHAR ucAction;                // define as ATOM_TRANSMITER_ACTION_XXX
1430   UCHAR ucLaneNum;
1431   UCHAR ucReserved[3];
1432 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V4;
1433 
1434 //ucConfig
1435 //Bit0
1436 #define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR         0x01
1437 //Bit1
1438 #define ATOM_TRANSMITTER_CONFIG_V4_COHERENT                      0x02
1439 //Bit2
1440 #define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK              0x04
1441 #define ATOM_TRANSMITTER_CONFIG_V4_LINKA                       0x00
1442 #define ATOM_TRANSMITTER_CONFIG_V4_LINKB                        0x04
1443 // Bit3
1444 #define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK           0x08
1445 #define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER                0x00
1446 #define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER                0x08
1447 // Bit5:4
1448 #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK            0x30
1449 #define ATOM_TRANSMITTER_CONFIG_V4_P1PLL                       0x00
1450 #define ATOM_TRANSMITTER_CONFIG_V4_P2PLL                      0x10
1451 #define ATOM_TRANSMITTER_CONFIG_V4_DCPLL                      0x20   // New in _V4
1452 #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT           0x30   // Changed comparing to V3
1453 // Bit7:6
1454 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK     0xC0
1455 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1              0x00   //AB
1456 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2              0x40   //CD
1457 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3              0x80   //EF
1458 
1459 
1460 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5
1461 {
1462 #if ATOM_BIG_ENDIAN
1463   UCHAR ucReservd1:1;
1464   UCHAR ucHPDSel:3;
1465   UCHAR ucPhyClkSrcId:2;
1466   UCHAR ucCoherentMode:1;
1467   UCHAR ucReserved:1;
1468 #else
1469   UCHAR ucReserved:1;
1470   UCHAR ucCoherentMode:1;
1471   UCHAR ucPhyClkSrcId:2;
1472   UCHAR ucHPDSel:3;
1473   UCHAR ucReservd1:1;
1474 #endif
1475 }ATOM_DIG_TRANSMITTER_CONFIG_V5;
1476 
1477 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
1478 {
1479   USHORT usSymClock;              // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock,  (HDMI deep color), =pixel clock * deep_color_ratio
1480   UCHAR  ucPhyId;                   // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
1481   UCHAR  ucAction;                // define as ATOM_TRANSMITER_ACTION_xxx
1482   UCHAR  ucLaneNum;                 // indicate lane number 1-8
1483   UCHAR  ucConnObjId;               // Connector Object Id defined in ObjectId.h
1484   UCHAR  ucDigMode;                 // indicate DIG mode
1485   union{
1486   ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
1487   UCHAR ucConfig;
1488   };
1489   UCHAR  ucDigEncoderSel;           // indicate DIG front end encoder
1490   UCHAR  ucDPLaneSet;
1491   UCHAR  ucReserved;
1492   UCHAR  ucReserved1;
1493 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5;
1494 
1495 //ucPhyId
1496 #define ATOM_PHY_ID_UNIPHYA                                 0
1497 #define ATOM_PHY_ID_UNIPHYB                                 1
1498 #define ATOM_PHY_ID_UNIPHYC                                 2
1499 #define ATOM_PHY_ID_UNIPHYD                                 3
1500 #define ATOM_PHY_ID_UNIPHYE                                 4
1501 #define ATOM_PHY_ID_UNIPHYF                                 5
1502 #define ATOM_PHY_ID_UNIPHYG                                 6
1503 
1504 // ucDigEncoderSel
1505 #define ATOM_TRANMSITTER_V5__DIGA_SEL                       0x01
1506 #define ATOM_TRANMSITTER_V5__DIGB_SEL                       0x02
1507 #define ATOM_TRANMSITTER_V5__DIGC_SEL                       0x04
1508 #define ATOM_TRANMSITTER_V5__DIGD_SEL                       0x08
1509 #define ATOM_TRANMSITTER_V5__DIGE_SEL                       0x10
1510 #define ATOM_TRANMSITTER_V5__DIGF_SEL                       0x20
1511 #define ATOM_TRANMSITTER_V5__DIGG_SEL                       0x40
1512 
1513 // ucDigMode
1514 #define ATOM_TRANSMITTER_DIGMODE_V5_DP                      0
1515 #define ATOM_TRANSMITTER_DIGMODE_V5_LVDS                    1
1516 #define ATOM_TRANSMITTER_DIGMODE_V5_DVI                     2
1517 #define ATOM_TRANSMITTER_DIGMODE_V5_HDMI                    3
1518 #define ATOM_TRANSMITTER_DIGMODE_V5_SDVO                    4
1519 #define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST                  5
1520 
1521 // ucDPLaneSet
1522 #define DP_LANE_SET__0DB_0_4V                               0x00
1523 #define DP_LANE_SET__0DB_0_6V                               0x01
1524 #define DP_LANE_SET__0DB_0_8V                               0x02
1525 #define DP_LANE_SET__0DB_1_2V                               0x03
1526 #define DP_LANE_SET__3_5DB_0_4V                             0x08
1527 #define DP_LANE_SET__3_5DB_0_6V                             0x09
1528 #define DP_LANE_SET__3_5DB_0_8V                             0x0a
1529 #define DP_LANE_SET__6DB_0_4V                               0x10
1530 #define DP_LANE_SET__6DB_0_6V                               0x11
1531 #define DP_LANE_SET__9_5DB_0_4V                             0x18
1532 
1533 // ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
1534 // Bit1
1535 #define ATOM_TRANSMITTER_CONFIG_V5_COHERENT                      0x02
1536 
1537 // Bit3:2
1538 #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK            0x0c
1539 #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT          0x02
1540 
1541 #define ATOM_TRANSMITTER_CONFIG_V5_P1PLL                       0x00
1542 #define ATOM_TRANSMITTER_CONFIG_V5_P2PLL                      0x04
1543 #define ATOM_TRANSMITTER_CONFIG_V5_P0PLL                      0x08
1544 #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT           0x0c
1545 // Bit6:4
1546 #define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK                0x70
1547 #define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT            0x04
1548 
1549 #define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL                    0x00
1550 #define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL                      0x10
1551 #define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL                      0x20
1552 #define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL                      0x30
1553 #define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL                      0x40
1554 #define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL                      0x50
1555 #define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL                      0x60
1556 
1557 #define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5            DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
1558 
1559 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_6
1560 {
1561   UCHAR ucPhyId;           // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
1562   UCHAR ucAction;          // define as ATOM_TRANSMITER_ACTION_xxx
1563   union
1564   {
1565     UCHAR ucDigMode;       // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI
1566     UCHAR ucDPLaneSet;     // DP voltage swing and pre-emphasis value defined in DPCD DP_LANE_SET, "DP_LANE_SET__xDB_y_zV"
1567   };
1568   UCHAR ucLaneNum;         // Lane number
1569   ULONG ulSymClock;        // Symbol Clock in 10Khz
1570   UCHAR ucHPDSel;          // =1: HPD1, =2: HPD2, .... =6: HPD6, =0: HPD is not assigned
1571   UCHAR ucDigEncoderSel;   // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable,
1572   UCHAR ucConnObjId;       // Connector Object Id defined in ObjectId.h
1573   UCHAR ucReserved;
1574   ULONG ulReserved;
1575 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_6;
1576 
1577 
1578 // ucDigEncoderSel
1579 #define ATOM_TRANMSITTER_V6__DIGA_SEL                       0x01
1580 #define ATOM_TRANMSITTER_V6__DIGB_SEL                       0x02
1581 #define ATOM_TRANMSITTER_V6__DIGC_SEL                       0x04
1582 #define ATOM_TRANMSITTER_V6__DIGD_SEL                       0x08
1583 #define ATOM_TRANMSITTER_V6__DIGE_SEL                       0x10
1584 #define ATOM_TRANMSITTER_V6__DIGF_SEL                       0x20
1585 #define ATOM_TRANMSITTER_V6__DIGG_SEL                       0x40
1586 
1587 // ucDigMode
1588 #define ATOM_TRANSMITTER_DIGMODE_V6_DP                      0
1589 #define ATOM_TRANSMITTER_DIGMODE_V6_DVI                     2
1590 #define ATOM_TRANSMITTER_DIGMODE_V6_HDMI                    3
1591 #define ATOM_TRANSMITTER_DIGMODE_V6_DP_MST                  5
1592 
1593 //ucHPDSel
1594 #define ATOM_TRANSMITTER_V6_NO_HPD_SEL                      0x00
1595 #define ATOM_TRANSMITTER_V6_HPD1_SEL                        0x01
1596 #define ATOM_TRANSMITTER_V6_HPD2_SEL                        0x02
1597 #define ATOM_TRANSMITTER_V6_HPD3_SEL                        0x03
1598 #define ATOM_TRANSMITTER_V6_HPD4_SEL                        0x04
1599 #define ATOM_TRANSMITTER_V6_HPD5_SEL                        0x05
1600 #define ATOM_TRANSMITTER_V6_HPD6_SEL                        0x06
1601 
1602 
1603 /****************************************************************************/
1604 // Structures used by ExternalEncoderControlTable V1.3
1605 // ASIC Families: Evergreen, Llano, NI
1606 // ucTableFormatRevision=1
1607 // ucTableContentRevision=3
1608 /****************************************************************************/
1609 
1610 typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3
1611 {
1612   union{
1613   USHORT usPixelClock;      // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT
1614   USHORT usConnectorId;     // connector id, valid when ucAction = INIT
1615   };
1616   UCHAR  ucConfig;          // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT
1617   UCHAR  ucAction;          //
1618   UCHAR  ucEncoderMode;     // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
1619   UCHAR  ucLaneNum;         // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT
1620   UCHAR  ucBitPerColor;     // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
1621   UCHAR  ucReserved;
1622 }EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3;
1623 
1624 // ucAction
1625 #define EXTERANL_ENCODER_ACTION_V3_DISABLE_OUTPUT         0x00
1626 #define EXTERANL_ENCODER_ACTION_V3_ENABLE_OUTPUT          0x01
1627 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT           0x07
1628 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP          0x0f
1629 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF   0x10
1630 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING       0x11
1631 #define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION      0x12
1632 #define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP              0x14
1633 
1634 // ucConfig
1635 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK            0x03
1636 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ        0x00
1637 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ        0x01
1638 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ        0x02
1639 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MAKS          0x70
1640 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1                  0x00
1641 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2                  0x10
1642 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3                  0x20
1643 
1644 typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3
1645 {
1646   EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder;
1647   ULONG ulReserved[2];
1648 }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3;
1649 
1650 
1651 /****************************************************************************/
1652 // Structures used by DAC1OuputControlTable
1653 //                    DAC2OuputControlTable
1654 //                    LVTMAOutputControlTable  (Before DEC30)
1655 //                    TMDSAOutputControlTable  (Before DEC30)
1656 /****************************************************************************/
1657 typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1658 {
1659   UCHAR  ucAction;                    // Possible input:ATOM_ENABLE||ATOMDISABLE
1660                                       // When the display is LCD, in addition to above:
1661                                       // ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START||
1662                                       // ATOM_LCD_SELFTEST_STOP
1663 
1664   UCHAR  aucPadding[3];               // padding to DWORD aligned
1665 }DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;
1666 
1667 #define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1668 
1669 
1670 #define CRT1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1671 #define CRT1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1672 
1673 #define CRT2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1674 #define CRT2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1675 
1676 #define CV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1677 #define CV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1678 
1679 #define TV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1680 #define TV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1681 
1682 #define DFP1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1683 #define DFP1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1684 
1685 #define DFP2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1686 #define DFP2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1687 
1688 #define LCD1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1689 #define LCD1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1690 
1691 #define DVO_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1692 #define DVO_OUTPUT_CONTROL_PS_ALLOCATION   DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
1693 #define DVO_OUTPUT_CONTROL_PARAMETERS_V3   DIG_TRANSMITTER_CONTROL_PARAMETERS
1694 
1695 
1696 typedef struct _LVTMA_OUTPUT_CONTROL_PARAMETERS_V2
1697 {
1698   // Possible value of ucAction
1699   // ATOM_TRANSMITTER_ACTION_LCD_BLON
1700   // ATOM_TRANSMITTER_ACTION_LCD_BLOFF
1701   // ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL
1702   // ATOM_TRANSMITTER_ACTION_POWER_ON
1703   // ATOM_TRANSMITTER_ACTION_POWER_OFF
1704   UCHAR  ucAction;
1705   UCHAR  ucBriLevel;
1706   USHORT usPwmFreq;                  // in unit of Hz, 200 means 200Hz
1707 }LVTMA_OUTPUT_CONTROL_PARAMETERS_V2;
1708 
1709 
1710 
1711 /****************************************************************************/
1712 // Structures used by BlankCRTCTable
1713 /****************************************************************************/
1714 typedef struct _BLANK_CRTC_PARAMETERS
1715 {
1716   UCHAR  ucCRTC;                       // ATOM_CRTC1 or ATOM_CRTC2
1717   UCHAR  ucBlanking;                  // ATOM_BLANKING or ATOM_BLANKINGOFF
1718   USHORT usBlackColorRCr;
1719   USHORT usBlackColorGY;
1720   USHORT usBlackColorBCb;
1721 }BLANK_CRTC_PARAMETERS;
1722 #define BLANK_CRTC_PS_ALLOCATION    BLANK_CRTC_PARAMETERS
1723 
1724 /****************************************************************************/
1725 // Structures used by EnableCRTCTable
1726 //                    EnableCRTCMemReqTable
1727 //                    UpdateCRTC_DoubleBufferRegistersTable
1728 /****************************************************************************/
1729 typedef struct _ENABLE_CRTC_PARAMETERS
1730 {
1731   UCHAR ucCRTC;                         // ATOM_CRTC1 or ATOM_CRTC2
1732   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
1733   UCHAR ucPadding[2];
1734 }ENABLE_CRTC_PARAMETERS;
1735 #define ENABLE_CRTC_PS_ALLOCATION   ENABLE_CRTC_PARAMETERS
1736 
1737 /****************************************************************************/
1738 // Structures used by SetCRTC_OverScanTable
1739 /****************************************************************************/
1740 typedef struct _SET_CRTC_OVERSCAN_PARAMETERS
1741 {
1742   USHORT usOverscanRight;             // right
1743   USHORT usOverscanLeft;              // left
1744   USHORT usOverscanBottom;            // bottom
1745   USHORT usOverscanTop;               // top
1746   UCHAR  ucCRTC;                      // ATOM_CRTC1 or ATOM_CRTC2
1747   UCHAR  ucPadding[3];
1748 }SET_CRTC_OVERSCAN_PARAMETERS;
1749 #define SET_CRTC_OVERSCAN_PS_ALLOCATION  SET_CRTC_OVERSCAN_PARAMETERS
1750 
1751 /****************************************************************************/
1752 // Structures used by SetCRTC_ReplicationTable
1753 /****************************************************************************/
1754 typedef struct _SET_CRTC_REPLICATION_PARAMETERS
1755 {
1756   UCHAR ucH_Replication;              // horizontal replication
1757   UCHAR ucV_Replication;              // vertical replication
1758   UCHAR usCRTC;                       // ATOM_CRTC1 or ATOM_CRTC2
1759   UCHAR ucPadding;
1760 }SET_CRTC_REPLICATION_PARAMETERS;
1761 #define SET_CRTC_REPLICATION_PS_ALLOCATION  SET_CRTC_REPLICATION_PARAMETERS
1762 
1763 /****************************************************************************/
1764 // Structures used by SelectCRTC_SourceTable
1765 /****************************************************************************/
1766 typedef struct _SELECT_CRTC_SOURCE_PARAMETERS
1767 {
1768   UCHAR ucCRTC;                         // ATOM_CRTC1 or ATOM_CRTC2
1769   UCHAR ucDevice;                     // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|....
1770   UCHAR ucPadding[2];
1771 }SELECT_CRTC_SOURCE_PARAMETERS;
1772 #define SELECT_CRTC_SOURCE_PS_ALLOCATION  SELECT_CRTC_SOURCE_PARAMETERS
1773 
1774 typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2
1775 {
1776   UCHAR ucCRTC;                         // ATOM_CRTC1 or ATOM_CRTC2
1777   UCHAR ucEncoderID;                  // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
1778   UCHAR ucEncodeMode;                           // Encoding mode, only valid when using DIG1/DIG2/DVO
1779   UCHAR ucPadding;
1780 }SELECT_CRTC_SOURCE_PARAMETERS_V2;
1781 
1782 //ucEncoderID
1783 //#define ASIC_INT_DAC1_ENCODER_ID                      0x00
1784 //#define ASIC_INT_TV_ENCODER_ID                           0x02
1785 //#define ASIC_INT_DIG1_ENCODER_ID                        0x03
1786 //#define ASIC_INT_DAC2_ENCODER_ID                        0x04
1787 //#define ASIC_EXT_TV_ENCODER_ID                           0x06
1788 //#define ASIC_INT_DVO_ENCODER_ID                           0x07
1789 //#define ASIC_INT_DIG2_ENCODER_ID                        0x09
1790 //#define ASIC_EXT_DIG_ENCODER_ID                           0x05
1791 
1792 //ucEncodeMode
1793 //#define ATOM_ENCODER_MODE_DP                              0
1794 //#define ATOM_ENCODER_MODE_LVDS                           1
1795 //#define ATOM_ENCODER_MODE_DVI                              2
1796 //#define ATOM_ENCODER_MODE_HDMI                           3
1797 //#define ATOM_ENCODER_MODE_SDVO                           4
1798 //#define ATOM_ENCODER_MODE_TV                              13
1799 //#define ATOM_ENCODER_MODE_CV                              14
1800 //#define ATOM_ENCODER_MODE_CRT                              15
1801 
1802 
1803 typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V3
1804 {
1805   UCHAR ucCRTC;                         // ATOM_CRTC1 or ATOM_CRTC2
1806   UCHAR ucEncoderID;                    // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
1807   UCHAR ucEncodeMode;                   // Encoding mode, only valid when using DIG1/DIG2/DVO
1808   UCHAR ucDstBpc;                       // PANEL_6/8/10/12BIT_PER_COLOR
1809 }SELECT_CRTC_SOURCE_PARAMETERS_V3;
1810 
1811 
1812 /****************************************************************************/
1813 // Structures used by SetPixelClockTable
1814 //                    GetPixelClockTable
1815 /****************************************************************************/
1816 //Major revision=1., Minor revision=1
1817 typedef struct _PIXEL_CLOCK_PARAMETERS
1818 {
1819   USHORT usPixelClock;                // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1820                                       // 0 means disable PPLL
1821   USHORT usRefDiv;                    // Reference divider
1822   USHORT usFbDiv;                     // feedback divider
1823   UCHAR  ucPostDiv;                   // post divider
1824   UCHAR  ucFracFbDiv;                 // fractional feedback divider
1825   UCHAR  ucPpll;                      // ATOM_PPLL1 or ATOM_PPL2
1826   UCHAR  ucRefDivSrc;                 // ATOM_PJITTER or ATO_NONPJITTER
1827   UCHAR  ucCRTC;                      // Which CRTC uses this Ppll
1828   UCHAR  ucPadding;
1829 }PIXEL_CLOCK_PARAMETERS;
1830 
1831 //Major revision=1., Minor revision=2, add ucMiscIfno
1832 //ucMiscInfo:
1833 #define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
1834 #define MISC_DEVICE_INDEX_MASK        0xF0
1835 #define MISC_DEVICE_INDEX_SHIFT       4
1836 
1837 typedef struct _PIXEL_CLOCK_PARAMETERS_V2
1838 {
1839   USHORT usPixelClock;                // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1840                                       // 0 means disable PPLL
1841   USHORT usRefDiv;                    // Reference divider
1842   USHORT usFbDiv;                     // feedback divider
1843   UCHAR  ucPostDiv;                   // post divider
1844   UCHAR  ucFracFbDiv;                 // fractional feedback divider
1845   UCHAR  ucPpll;                      // ATOM_PPLL1 or ATOM_PPL2
1846   UCHAR  ucRefDivSrc;                 // ATOM_PJITTER or ATO_NONPJITTER
1847   UCHAR  ucCRTC;                      // Which CRTC uses this Ppll
1848   UCHAR  ucMiscInfo;                  // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog
1849 }PIXEL_CLOCK_PARAMETERS_V2;
1850 
1851 //Major revision=1., Minor revision=3, structure/definition change
1852 //ucEncoderMode:
1853 //ATOM_ENCODER_MODE_DP
1854 //ATOM_ENOCDER_MODE_LVDS
1855 //ATOM_ENOCDER_MODE_DVI
1856 //ATOM_ENOCDER_MODE_HDMI
1857 //ATOM_ENOCDER_MODE_SDVO
1858 //ATOM_ENCODER_MODE_TV                                          13
1859 //ATOM_ENCODER_MODE_CV                                          14
1860 //ATOM_ENCODER_MODE_CRT                                          15
1861 
1862 //ucDVOConfig
1863 //#define DVO_ENCODER_CONFIG_RATE_SEL                     0x01
1864 //#define DVO_ENCODER_CONFIG_DDR_SPEED                  0x00
1865 //#define DVO_ENCODER_CONFIG_SDR_SPEED                  0x01
1866 //#define DVO_ENCODER_CONFIG_OUTPUT_SEL                  0x0c
1867 //#define DVO_ENCODER_CONFIG_LOW12BIT                     0x00
1868 //#define DVO_ENCODER_CONFIG_UPPER12BIT                  0x04
1869 //#define DVO_ENCODER_CONFIG_24BIT                        0x08
1870 
1871 //ucMiscInfo: also changed, see below
1872 #define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL                  0x01
1873 #define PIXEL_CLOCK_MISC_VGA_MODE                              0x02
1874 #define PIXEL_CLOCK_MISC_CRTC_SEL_MASK                     0x04
1875 #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1                     0x00
1876 #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2                     0x04
1877 #define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK         0x08
1878 #define PIXEL_CLOCK_MISC_REF_DIV_SRC                    0x10
1879 // V1.4 for RoadRunner
1880 #define PIXEL_CLOCK_V4_MISC_SS_ENABLE               0x10
1881 #define PIXEL_CLOCK_V4_MISC_COHERENT_MODE           0x20
1882 
1883 
1884 typedef struct _PIXEL_CLOCK_PARAMETERS_V3
1885 {
1886   USHORT usPixelClock;                // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1887                                       // 0 means disable PPLL. For VGA PPLL,make sure this value is not 0.
1888   USHORT usRefDiv;                    // Reference divider
1889   USHORT usFbDiv;                     // feedback divider
1890   UCHAR  ucPostDiv;                   // post divider
1891   UCHAR  ucFracFbDiv;                 // fractional feedback divider
1892   UCHAR  ucPpll;                      // ATOM_PPLL1 or ATOM_PPL2
1893   UCHAR  ucTransmitterId;             // graphic encoder id defined in objectId.h
1894    union
1895    {
1896   UCHAR  ucEncoderMode;               // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/
1897    UCHAR  ucDVOConfig;                           // when use DVO, need to know SDR/DDR, 12bit or 24bit
1898    };
1899   UCHAR  ucMiscInfo;                  // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel
1900                                       // bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source
1901                                       // bit[4]=0:use XTALIN as the source of reference divider,=1 use the pre-defined clock as the source of reference divider
1902 }PIXEL_CLOCK_PARAMETERS_V3;
1903 
1904 #define PIXEL_CLOCK_PARAMETERS_LAST                     PIXEL_CLOCK_PARAMETERS_V2
1905 #define GET_PIXEL_CLOCK_PS_ALLOCATION                  PIXEL_CLOCK_PARAMETERS_LAST
1906 
1907 
1908 typedef struct _PIXEL_CLOCK_PARAMETERS_V5
1909 {
1910   UCHAR  ucCRTC;             // ATOM_CRTC1~6, indicate the CRTC controller to
1911                              // drive the pixel clock. not used for DCPLL case.
1912   union{
1913   UCHAR  ucReserved;
1914   UCHAR  ucFracFbDiv;        // [gphan] temporary to prevent build problem.  remove it after driver code is changed.
1915   };
1916   USHORT usPixelClock;       // target the pixel clock to drive the CRTC timing
1917                              // 0 means disable PPLL/DCPLL.
1918   USHORT usFbDiv;            // feedback divider integer part.
1919   UCHAR  ucPostDiv;          // post divider.
1920   UCHAR  ucRefDiv;           // Reference divider
1921   UCHAR  ucPpll;             // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
1922   UCHAR  ucTransmitterID;    // ASIC encoder id defined in objectId.h,
1923                              // indicate which graphic encoder will be used.
1924   UCHAR  ucEncoderMode;      // Encoder mode:
1925   UCHAR  ucMiscInfo;         // bit[0]= Force program PPLL
1926                              // bit[1]= when VGA timing is used.
1927                              // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
1928                              // bit[4]= RefClock source for PPLL.
1929                              // =0: XTLAIN( default mode )
1930                               // =1: other external clock source, which is pre-defined
1931                              //     by VBIOS depend on the feature required.
1932                              // bit[7:5]: reserved.
1933   ULONG  ulFbDivDecFrac;     // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
1934 
1935 }PIXEL_CLOCK_PARAMETERS_V5;
1936 
1937 #define PIXEL_CLOCK_V5_MISC_FORCE_PROG_PPLL               0x01
1938 #define PIXEL_CLOCK_V5_MISC_VGA_MODE                        0x02
1939 #define PIXEL_CLOCK_V5_MISC_HDMI_BPP_MASK           0x0c
1940 #define PIXEL_CLOCK_V5_MISC_HDMI_24BPP              0x00
1941 #define PIXEL_CLOCK_V5_MISC_HDMI_30BPP              0x04
1942 #define PIXEL_CLOCK_V5_MISC_HDMI_32BPP              0x08
1943 #define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC             0x10
1944 
1945 typedef struct _CRTC_PIXEL_CLOCK_FREQ
1946 {
1947 #if ATOM_BIG_ENDIAN
1948   ULONG  ucCRTC:8;            // ATOM_CRTC1~6, indicate the CRTC controller to
1949                               // drive the pixel clock. not used for DCPLL case.
1950   ULONG  ulPixelClock:24;     // target the pixel clock to drive the CRTC timing.
1951                               // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
1952 #else
1953   ULONG  ulPixelClock:24;     // target the pixel clock to drive the CRTC timing.
1954                               // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
1955   ULONG  ucCRTC:8;            // ATOM_CRTC1~6, indicate the CRTC controller to
1956                               // drive the pixel clock. not used for DCPLL case.
1957 #endif
1958 }CRTC_PIXEL_CLOCK_FREQ;
1959 
1960 typedef struct _PIXEL_CLOCK_PARAMETERS_V6
1961 {
1962   union{
1963     CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq;    // pixel clock and CRTC id frequency
1964     ULONG ulDispEngClkFreq;                  // dispclk frequency
1965   };
1966   USHORT usFbDiv;            // feedback divider integer part.
1967   UCHAR  ucPostDiv;          // post divider.
1968   UCHAR  ucRefDiv;           // Reference divider
1969   UCHAR  ucPpll;             // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
1970   UCHAR  ucTransmitterID;    // ASIC encoder id defined in objectId.h,
1971                              // indicate which graphic encoder will be used.
1972   UCHAR  ucEncoderMode;      // Encoder mode:
1973   UCHAR  ucMiscInfo;         // bit[0]= Force program PPLL
1974                              // bit[1]= when VGA timing is used.
1975                              // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
1976                              // bit[4]= RefClock source for PPLL.
1977                              // =0: XTLAIN( default mode )
1978                               // =1: other external clock source, which is pre-defined
1979                              //     by VBIOS depend on the feature required.
1980                              // bit[7:5]: reserved.
1981   ULONG  ulFbDivDecFrac;     // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
1982 
1983 }PIXEL_CLOCK_PARAMETERS_V6;
1984 
1985 #define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL               0x01
1986 #define PIXEL_CLOCK_V6_MISC_VGA_MODE                        0x02
1987 #define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK           0x0c
1988 #define PIXEL_CLOCK_V6_MISC_HDMI_24BPP              0x00
1989 #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP              0x04
1990 #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6           0x08    //for V6, the correct definition for 36bpp should be 2 for 36bpp(2:1)
1991 #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP              0x08
1992 #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6           0x04    //for V6, the correct definition for 30bpp should be 1 for 36bpp(5:4)
1993 #define PIXEL_CLOCK_V6_MISC_HDMI_48BPP              0x0c
1994 #define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC             0x10
1995 #define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK            0x40
1996 #define PIXEL_CLOCK_V6_MISC_DPREFCLK_BYPASS         0x40
1997 
1998 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2
1999 {
2000   PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput;
2001 }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2;
2002 
2003 typedef struct _GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2
2004 {
2005   UCHAR  ucStatus;
2006   UCHAR  ucRefDivSrc;                 // =1: reference clock source from XTALIN, =0: source from PCIE ref clock
2007   UCHAR  ucReserved[2];
2008 }GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2;
2009 
2010 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3
2011 {
2012   PIXEL_CLOCK_PARAMETERS_V5 sDispClkInput;
2013 }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3;
2014 
2015 typedef struct _PIXEL_CLOCK_PARAMETERS_V7
2016 {
2017     ULONG  ulPixelClock;               // target the pixel clock to drive the CRTC timing in unit of 100Hz.
2018 
2019     UCHAR  ucPpll;                     // ATOM_PHY_PLL0/ATOM_PHY_PLL1/ATOM_PPLL0
2020     UCHAR  ucTransmitterID;            // ASIC encoder id defined in objectId.h,
2021                                        // indicate which graphic encoder will be used.
2022     UCHAR  ucEncoderMode;              // Encoder mode:
2023     UCHAR  ucMiscInfo;                 // bit[0]= Force program PLL for pixclk
2024                                        // bit[1]= Force program PHY PLL only ( internally used by VBIOS only in DP case which PHYPLL is programmed for SYMCLK, not Pixclk )
2025                                        // bit[5:4]= RefClock source for PPLL.
2026                                        //          =0: XTLAIN( default mode )
2027                                        //          =1: pcie
2028                                        //          =2: GENLK
2029     UCHAR  ucCRTC;                     // ATOM_CRTC1~6, indicate the CRTC controller to
2030     UCHAR  ucDeepColorRatio;           // HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:36bpp
2031     UCHAR  ucReserved[2];
2032     ULONG  ulReserved;
2033 }PIXEL_CLOCK_PARAMETERS_V7;
2034 
2035 //ucMiscInfo
2036 #define PIXEL_CLOCK_V7_MISC_FORCE_PROG_PPLL         0x01
2037 #define PIXEL_CLOCK_V7_MISC_PROG_PHYPLL             0x02
2038 #define PIXEL_CLOCK_V7_MISC_YUV420_MODE             0x04
2039 #define PIXEL_CLOCK_V7_MISC_DVI_DUALLINK_EN         0x08
2040 #define PIXEL_CLOCK_V7_MISC_REF_DIV_SRC             0x30
2041 #define PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_XTALIN      0x00
2042 #define PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_PCIE        0x10
2043 #define PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_GENLK       0x20
2044 
2045 //ucDeepColorRatio
2046 #define PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_DIS          0x00      //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO
2047 #define PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_5_4          0x01      //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4
2048 #define PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_3_2          0x02      //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2
2049 #define PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_2_1          0x03      //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1
2050 
2051 // SetDCEClockTable input parameter for DCE11.1
2052 typedef struct _SET_DCE_CLOCK_PARAMETERS_V1_1
2053 {
2054   ULONG  ulDISPClkFreq;       // target DISPCLK frquency in unit of 10kHz, return real DISPCLK frequency. when ucFlag[1]=1, in unit of 100Hz.
2055   UCHAR  ucFlag;              // bit0=1: DPREFCLK bypass DFS bit0=0: DPREFCLK not bypass DFS
2056   UCHAR  ucCrtc;              // use when enable DCCG pixel clock ucFlag[1]=1
2057   UCHAR  ucPpllId;            // use when enable DCCG pixel clock ucFlag[1]=1
2058   UCHAR  ucDeepColorRatio;    // use when enable DCCG pixel clock ucFlag[1]=1
2059 }SET_DCE_CLOCK_PARAMETERS_V1_1;
2060 
2061 
2062 typedef struct _SET_DCE_CLOCK_PS_ALLOCATION_V1_1
2063 {
2064   SET_DCE_CLOCK_PARAMETERS_V1_1 asParam;
2065   ULONG ulReserved[2];
2066 }SET_DCE_CLOCK_PS_ALLOCATION_V1_1;
2067 
2068 //SET_DCE_CLOCK_PARAMETERS_V1_1.ucFlag
2069 #define SET_DCE_CLOCK_FLAG_GEN_DPREFCLK            0x01
2070 #define SET_DCE_CLOCK_FLAG_DPREFCLK_BYPASS         0x01
2071 #define SET_DCE_CLOCK_FLAG_ENABLE_PIXCLK           0x02
2072 
2073 // SetDCEClockTable input parameter for DCE11.2( POLARIS10 and POLARIS11 ) and above
2074 typedef struct _SET_DCE_CLOCK_PARAMETERS_V2_1
2075 {
2076   ULONG  ulDCEClkFreq;                               // target DCE frequency in unit of 10KHZ, return real DISPCLK/DPREFCLK frequency.
2077   UCHAR  ucDCEClkType;                               // =0: DISPCLK  =1: DPREFCLK  =2: PIXCLK
2078   UCHAR  ucDCEClkSrc;                                // ATOM_PLL0 or ATOM_GCK_DFS or ATOM_FCH_CLK or ATOM_COMBOPHY_PLLx
2079   UCHAR  ucDCEClkFlag;                               // Bit [1:0] = PPLL ref clock source ( when ucDCEClkSrc= ATOM_PPLL0 )
2080   UCHAR  ucCRTC;                                     // ucDisp Pipe Id, ATOM_CRTC0/1/2/..., use only when ucDCEClkType = PIXCLK
2081 }SET_DCE_CLOCK_PARAMETERS_V2_1;
2082 
2083 //ucDCEClkType
2084 #define DCE_CLOCK_TYPE_DISPCLK                        0
2085 #define DCE_CLOCK_TYPE_DPREFCLK                       1
2086 #define DCE_CLOCK_TYPE_PIXELCLK                       2        // used by VBIOS internally, called by SetPixelClockTable
2087 
2088 //ucDCEClkFlag when ucDCEClkType == DPREFCLK
2089 #define DCE_CLOCK_FLAG_PLL_REFCLK_SRC_MASK            0x03
2090 #define DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENERICA        0x00
2091 #define DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENLK           0x01
2092 #define DCE_CLOCK_FLAG_PLL_REFCLK_SRC_PCIE            0x02
2093 #define DCE_CLOCK_FLAG_PLL_REFCLK_SRC_XTALIN          0x03
2094 
2095 //ucDCEClkFlag when ucDCEClkType == PIXCLK
2096 #define DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_MASK      0x03
2097 #define DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_DIS       0x00      //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO
2098 #define DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_5_4       0x01      //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4
2099 #define DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_3_2       0x02      //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2
2100 #define DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_2_1       0x03      //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1
2101 #define DCE_CLOCK_FLAG_PIXCLK_YUV420_MODE             0x04
2102 
2103 typedef struct _SET_DCE_CLOCK_PS_ALLOCATION_V2_1
2104 {
2105   SET_DCE_CLOCK_PARAMETERS_V2_1 asParam;
2106   ULONG ulReserved[2];
2107 }SET_DCE_CLOCK_PS_ALLOCATION_V2_1;
2108 
2109 
2110 
2111 /****************************************************************************/
2112 // Structures used by AdjustDisplayPllTable
2113 /****************************************************************************/
2114 typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
2115 {
2116    USHORT usPixelClock;
2117    UCHAR ucTransmitterID;
2118    UCHAR ucEncodeMode;
2119    union
2120    {
2121       UCHAR ucDVOConfig;                           //if DVO, need passing link rate and output 12bitlow or 24bit
2122       UCHAR ucConfig;                                 //if none DVO, not defined yet
2123    };
2124    UCHAR ucReserved[3];
2125 }ADJUST_DISPLAY_PLL_PARAMETERS;
2126 
2127 #define ADJUST_DISPLAY_CONFIG_SS_ENABLE            0x10
2128 #define ADJUST_DISPLAY_PLL_PS_ALLOCATION              ADJUST_DISPLAY_PLL_PARAMETERS
2129 
2130 typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3
2131 {
2132    USHORT usPixelClock;                    // target pixel clock
2133    UCHAR ucTransmitterID;                  // GPU transmitter id defined in objectid.h
2134    UCHAR ucEncodeMode;                     // encoder mode: CRT, LVDS, DP, TMDS or HDMI
2135   UCHAR ucDispPllConfig;                 // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX
2136   UCHAR ucExtTransmitterID;               // external encoder id.
2137    UCHAR ucReserved[2];
2138 }ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3;
2139 
2140 // usDispPllConfig v1.2 for RoadRunner
2141 #define DISPPLL_CONFIG_DVO_RATE_SEL                0x0001     // need only when ucTransmitterID = DVO
2142 #define DISPPLL_CONFIG_DVO_DDR_SPEED               0x0000     // need only when ucTransmitterID = DVO
2143 #define DISPPLL_CONFIG_DVO_SDR_SPEED               0x0001     // need only when ucTransmitterID = DVO
2144 #define DISPPLL_CONFIG_DVO_OUTPUT_SEL              0x000c     // need only when ucTransmitterID = DVO
2145 #define DISPPLL_CONFIG_DVO_LOW12BIT                0x0000     // need only when ucTransmitterID = DVO
2146 #define DISPPLL_CONFIG_DVO_UPPER12BIT              0x0004     // need only when ucTransmitterID = DVO
2147 #define DISPPLL_CONFIG_DVO_24BIT                   0x0008     // need only when ucTransmitterID = DVO
2148 #define DISPPLL_CONFIG_SS_ENABLE                   0x0010     // Only used when ucEncoderMode = DP or LVDS
2149 #define DISPPLL_CONFIG_COHERENT_MODE               0x0020     // Only used when ucEncoderMode = TMDS or HDMI
2150 #define DISPPLL_CONFIG_DUAL_LINK                   0x0040     // Only used when ucEncoderMode = TMDS or LVDS
2151 
2152 
2153 typedef struct _ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3
2154 {
2155   ULONG ulDispPllFreq;                 // return display PPLL freq which is used to generate the pixclock, and related idclk, symclk etc
2156   UCHAR ucRefDiv;                      // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider and post_div ( if it is not given )
2157   UCHAR ucPostDiv;                     // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider
2158   UCHAR ucReserved[2];
2159 }ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3;
2160 
2161 typedef struct _ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3
2162 {
2163   union
2164   {
2165     ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3  sInput;
2166     ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 sOutput;
2167   };
2168 } ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3;
2169 
2170 /****************************************************************************/
2171 // Structures used by EnableYUVTable
2172 /****************************************************************************/
2173 typedef struct _ENABLE_YUV_PARAMETERS
2174 {
2175   UCHAR ucEnable;                     // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB)
2176   UCHAR ucCRTC;                       // Which CRTC needs this YUV or RGB format
2177   UCHAR ucPadding[2];
2178 }ENABLE_YUV_PARAMETERS;
2179 #define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
2180 
2181 /****************************************************************************/
2182 // Structures used by GetMemoryClockTable
2183 /****************************************************************************/
2184 typedef struct _GET_MEMORY_CLOCK_PARAMETERS
2185 {
2186   ULONG ulReturnMemoryClock;          // current memory speed in 10KHz unit
2187 } GET_MEMORY_CLOCK_PARAMETERS;
2188 #define GET_MEMORY_CLOCK_PS_ALLOCATION  GET_MEMORY_CLOCK_PARAMETERS
2189 
2190 /****************************************************************************/
2191 // Structures used by GetEngineClockTable
2192 /****************************************************************************/
2193 typedef struct _GET_ENGINE_CLOCK_PARAMETERS
2194 {
2195   ULONG ulReturnEngineClock;          // current engine speed in 10KHz unit
2196 } GET_ENGINE_CLOCK_PARAMETERS;
2197 #define GET_ENGINE_CLOCK_PS_ALLOCATION  GET_ENGINE_CLOCK_PARAMETERS
2198 
2199 /****************************************************************************/
2200 // Following Structures and constant may be obsolete
2201 /****************************************************************************/
2202 //Maxium 8 bytes,the data read in will be placed in the parameter space.
2203 //Read operaion successeful when the paramter space is non-zero, otherwise read operation failed
2204 typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
2205 {
2206   USHORT    usPrescale;         //Ratio between Engine clock and I2C clock
2207   USHORT    usVRAMAddress;      //Adress in Frame Buffer where to pace raw EDID
2208   USHORT    usStatus;           //When use output: lower byte EDID checksum, high byte hardware status
2209                                 //WHen use input:  lower byte as 'byte to read':currently limited to 128byte or 1byte
2210   UCHAR     ucSlaveAddr;        //Read from which slave
2211   UCHAR     ucLineNumber;       //Read from which HW assisted line
2212 }READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
2213 #define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION  READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
2214 
2215 
2216 #define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE                  0
2217 #define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES              1
2218 #define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK       2
2219 #define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK  3
2220 #define  ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK       4
2221 
2222 typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
2223 {
2224   USHORT    usPrescale;         //Ratio between Engine clock and I2C clock
2225   USHORT    usByteOffset;       //Write to which byte
2226                                 //Upper portion of usByteOffset is Format of data
2227                                 //1bytePS+offsetPS
2228                                 //2bytesPS+offsetPS
2229                                 //blockID+offsetPS
2230                                 //blockID+offsetID
2231                                 //blockID+counterID+offsetID
2232   UCHAR     ucData;             //PS data1
2233   UCHAR     ucStatus;           //Status byte 1=success, 2=failure, Also is used as PS data2
2234   UCHAR     ucSlaveAddr;        //Write to which slave
2235   UCHAR     ucLineNumber;       //Write from which HW assisted line
2236 }WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;
2237 
2238 #define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION  WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
2239 
2240 typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
2241 {
2242   USHORT    usPrescale;         //Ratio between Engine clock and I2C clock
2243   UCHAR     ucSlaveAddr;        //Write to which slave
2244   UCHAR     ucLineNumber;       //Write from which HW assisted line
2245 }SET_UP_HW_I2C_DATA_PARAMETERS;
2246 
2247 /**************************************************************************/
2248 #define SPEED_FAN_CONTROL_PS_ALLOCATION   WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
2249 
2250 
2251 /****************************************************************************/
2252 // Structures used by PowerConnectorDetectionTable
2253 /****************************************************************************/
2254 typedef struct   _POWER_CONNECTOR_DETECTION_PARAMETERS
2255 {
2256   UCHAR   ucPowerConnectorStatus;      //Used for return value 0: detected, 1:not detected
2257    UCHAR   ucPwrBehaviorId;
2258    USHORT   usPwrBudget;                         //how much power currently boot to in unit of watt
2259 }POWER_CONNECTOR_DETECTION_PARAMETERS;
2260 
2261 typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION
2262 {
2263   UCHAR   ucPowerConnectorStatus;      //Used for return value 0: detected, 1:not detected
2264    UCHAR   ucReserved;
2265    USHORT   usPwrBudget;                         //how much power currently boot to in unit of watt
2266   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION    sReserved;
2267 }POWER_CONNECTOR_DETECTION_PS_ALLOCATION;
2268 
2269 
2270 /****************************LVDS SS Command Table Definitions**********************/
2271 
2272 /****************************************************************************/
2273 // Structures used by EnableSpreadSpectrumOnPPLLTable
2274 /****************************************************************************/
2275 typedef struct   _ENABLE_LVDS_SS_PARAMETERS
2276 {
2277   USHORT  usSpreadSpectrumPercentage;
2278   UCHAR   ucSpreadSpectrumType;           //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
2279   UCHAR   ucSpreadSpectrumStepSize_Delay; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY
2280   UCHAR   ucEnable;                       //ATOM_ENABLE or ATOM_DISABLE
2281   UCHAR   ucPadding[3];
2282 }ENABLE_LVDS_SS_PARAMETERS;
2283 
2284 //ucTableFormatRevision=1,ucTableContentRevision=2
2285 typedef struct   _ENABLE_LVDS_SS_PARAMETERS_V2
2286 {
2287   USHORT  usSpreadSpectrumPercentage;
2288   UCHAR   ucSpreadSpectrumType;           //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
2289   UCHAR   ucSpreadSpectrumStep;           //
2290   UCHAR   ucEnable;                       //ATOM_ENABLE or ATOM_DISABLE
2291   UCHAR   ucSpreadSpectrumDelay;
2292   UCHAR   ucSpreadSpectrumRange;
2293   UCHAR   ucPadding;
2294 }ENABLE_LVDS_SS_PARAMETERS_V2;
2295 
2296 //This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS.
2297 typedef struct   _ENABLE_SPREAD_SPECTRUM_ON_PPLL
2298 {
2299   USHORT  usSpreadSpectrumPercentage;
2300   UCHAR   ucSpreadSpectrumType;           // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
2301   UCHAR   ucSpreadSpectrumStep;           //
2302   UCHAR   ucEnable;                       // ATOM_ENABLE or ATOM_DISABLE
2303   UCHAR   ucSpreadSpectrumDelay;
2304   UCHAR   ucSpreadSpectrumRange;
2305   UCHAR   ucPpll;                                      // ATOM_PPLL1/ATOM_PPLL2
2306 }ENABLE_SPREAD_SPECTRUM_ON_PPLL;
2307 
2308  typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
2309 {
2310   USHORT  usSpreadSpectrumPercentage;
2311   UCHAR   ucSpreadSpectrumType;           // Bit[0]: 0-Down Spread,1-Center Spread.
2312                                         // Bit[1]: 1-Ext. 0-Int.
2313                                         // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
2314                                         // Bits[7:4] reserved
2315   UCHAR   ucEnable;                       // ATOM_ENABLE or ATOM_DISABLE
2316   USHORT  usSpreadSpectrumAmount;         // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
2317   USHORT  usSpreadSpectrumStep;           // SS_STEP_SIZE_DSFRAC
2318 }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2;
2319 
2320 #define ATOM_PPLL_SS_TYPE_V2_DOWN_SPREAD      0x00
2321 #define ATOM_PPLL_SS_TYPE_V2_CENTRE_SPREAD    0x01
2322 #define ATOM_PPLL_SS_TYPE_V2_EXT_SPREAD       0x02
2323 #define ATOM_PPLL_SS_TYPE_V2_PPLL_SEL_MASK    0x0c
2324 #define ATOM_PPLL_SS_TYPE_V2_P1PLL            0x00
2325 #define ATOM_PPLL_SS_TYPE_V2_P2PLL            0x04
2326 #define ATOM_PPLL_SS_TYPE_V2_DCPLL            0x08
2327 #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_MASK     0x00FF
2328 #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_SHIFT    0
2329 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK     0x0F00
2330 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT    8
2331 
2332 // Used by DCE5.0
2333  typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3
2334 {
2335   USHORT  usSpreadSpectrumAmountFrac;   // SS_AMOUNT_DSFRAC New in DCE5.0
2336   UCHAR   ucSpreadSpectrumType;           // Bit[0]: 0-Down Spread,1-Center Spread.
2337                                         // Bit[1]: 1-Ext. 0-Int.
2338                                         // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
2339                                         // Bits[7:4] reserved
2340   UCHAR   ucEnable;                       // ATOM_ENABLE or ATOM_DISABLE
2341   USHORT  usSpreadSpectrumAmount;         // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
2342   USHORT  usSpreadSpectrumStep;           // SS_STEP_SIZE_DSFRAC
2343 }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3;
2344 
2345 
2346 #define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD      0x00
2347 #define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD    0x01
2348 #define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD       0x02
2349 #define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK    0x0c
2350 #define ATOM_PPLL_SS_TYPE_V3_P1PLL            0x00
2351 #define ATOM_PPLL_SS_TYPE_V3_P2PLL            0x04
2352 #define ATOM_PPLL_SS_TYPE_V3_DCPLL            0x08
2353 #define ATOM_PPLL_SS_TYPE_V3_P0PLL            ATOM_PPLL_SS_TYPE_V3_DCPLL
2354 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK     0x00FF
2355 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT    0
2356 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK     0x0F00
2357 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT    8
2358 
2359 #define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION  ENABLE_SPREAD_SPECTRUM_ON_PPLL
2360 
2361 typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION
2362 {
2363   PIXEL_CLOCK_PARAMETERS sPCLKInput;
2364   ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;//Caller doesn't need to init this portion
2365 }SET_PIXEL_CLOCK_PS_ALLOCATION;
2366 
2367 
2368 
2369 #define ENABLE_VGA_RENDER_PS_ALLOCATION   SET_PIXEL_CLOCK_PS_ALLOCATION
2370 
2371 /****************************************************************************/
2372 // Structures used by ###
2373 /****************************************************************************/
2374 typedef struct   _MEMORY_TRAINING_PARAMETERS
2375 {
2376   ULONG ulTargetMemoryClock;          //In 10Khz unit
2377 }MEMORY_TRAINING_PARAMETERS;
2378 #define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
2379 
2380 
2381 typedef struct   _MEMORY_TRAINING_PARAMETERS_V1_2
2382 {
2383   USHORT usMemTrainingMode;
2384   USHORT usReserved;
2385 }MEMORY_TRAINING_PARAMETERS_V1_2;
2386 
2387 //usMemTrainingMode
2388 #define NORMAL_MEMORY_TRAINING_MODE       0
2389 #define ENTER_DRAM_SELFREFRESH_MODE       1
2390 #define EXIT_DRAM_SELFRESH_MODE           2
2391 
2392 /****************************LVDS and other encoder command table definitions **********************/
2393 
2394 
2395 /****************************************************************************/
2396 // Structures used by LVDSEncoderControlTable   (Before DEC30)
2397 //                    LVTMAEncoderControlTable  (Before DEC30)
2398 //                    TMDSAEncoderControlTable  (Before DEC30)
2399 /****************************************************************************/
2400 typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS
2401 {
2402   USHORT usPixelClock;  // in 10KHz; for bios convenient
2403   UCHAR  ucMisc;        // bit0=0: Enable single link
2404                         //     =1: Enable dual link
2405                         // Bit1=0: 666RGB
2406                         //     =1: 888RGB
2407   UCHAR  ucAction;      // 0: turn off encoder
2408                         // 1: setup and turn on encoder
2409 }LVDS_ENCODER_CONTROL_PARAMETERS;
2410 
2411 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION  LVDS_ENCODER_CONTROL_PARAMETERS
2412 
2413 #define TMDS1_ENCODER_CONTROL_PARAMETERS    LVDS_ENCODER_CONTROL_PARAMETERS
2414 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
2415 
2416 #define TMDS2_ENCODER_CONTROL_PARAMETERS    TMDS1_ENCODER_CONTROL_PARAMETERS
2417 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
2418 
2419 //ucTableFormatRevision=1,ucTableContentRevision=2
2420 typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2
2421 {
2422   USHORT usPixelClock;  // in 10KHz; for bios convenient
2423   UCHAR  ucMisc;        // see PANEL_ENCODER_MISC_xx defintions below
2424   UCHAR  ucAction;      // 0: turn off encoder
2425                         // 1: setup and turn on encoder
2426   UCHAR  ucTruncate;    // bit0=0: Disable truncate
2427                         //     =1: Enable truncate
2428                         // bit4=0: 666RGB
2429                         //     =1: 888RGB
2430   UCHAR  ucSpatial;     // bit0=0: Disable spatial dithering
2431                         //     =1: Enable spatial dithering
2432                         // bit4=0: 666RGB
2433                         //     =1: 888RGB
2434   UCHAR  ucTemporal;    // bit0=0: Disable temporal dithering
2435                         //     =1: Enable temporal dithering
2436                         // bit4=0: 666RGB
2437                         //     =1: 888RGB
2438                         // bit5=0: Gray level 2
2439                         //     =1: Gray level 4
2440   UCHAR  ucFRC;         // bit4=0: 25FRC_SEL pattern E
2441                         //     =1: 25FRC_SEL pattern F
2442                         // bit6:5=0: 50FRC_SEL pattern A
2443                         //       =1: 50FRC_SEL pattern B
2444                         //       =2: 50FRC_SEL pattern C
2445                         //       =3: 50FRC_SEL pattern D
2446                         // bit7=0: 75FRC_SEL pattern E
2447                         //     =1: 75FRC_SEL pattern F
2448 }LVDS_ENCODER_CONTROL_PARAMETERS_V2;
2449 
2450 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2
2451 
2452 #define TMDS1_ENCODER_CONTROL_PARAMETERS_V2    LVDS_ENCODER_CONTROL_PARAMETERS_V2
2453 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
2454 
2455 #define TMDS2_ENCODER_CONTROL_PARAMETERS_V2    TMDS1_ENCODER_CONTROL_PARAMETERS_V2
2456 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
2457 
2458 
2459 #define LVDS_ENCODER_CONTROL_PARAMETERS_V3     LVDS_ENCODER_CONTROL_PARAMETERS_V2
2460 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3  LVDS_ENCODER_CONTROL_PARAMETERS_V3
2461 
2462 #define TMDS1_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2463 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
2464 
2465 #define TMDS2_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2466 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
2467 
2468 /****************************************************************************/
2469 // Structures used by ###
2470 /****************************************************************************/
2471 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS
2472 {
2473   UCHAR    ucEnable;            // Enable or Disable External TMDS encoder
2474   UCHAR    ucMisc;              // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB}
2475   UCHAR    ucPadding[2];
2476 }ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;
2477 
2478 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION
2479 {
2480   ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS    sXTmdsEncoder;
2481   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION   sReserved;     //Caller doesn't need to init this portion
2482 }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;
2483 
2484 #define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2
2485 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2
2486 {
2487   ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2    sXTmdsEncoder;
2488   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION      sReserved;     //Caller doesn't need to init this portion
2489 }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;
2490 
2491 typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION
2492 {
2493   DIG_ENCODER_CONTROL_PARAMETERS            sDigEncoder;
2494   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
2495 }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;
2496 
2497 /****************************************************************************/
2498 // Structures used by DVOEncoderControlTable
2499 /****************************************************************************/
2500 //ucTableFormatRevision=1,ucTableContentRevision=3
2501 //ucDVOConfig:
2502 #define DVO_ENCODER_CONFIG_RATE_SEL                     0x01
2503 #define DVO_ENCODER_CONFIG_DDR_SPEED                  0x00
2504 #define DVO_ENCODER_CONFIG_SDR_SPEED                  0x01
2505 #define DVO_ENCODER_CONFIG_OUTPUT_SEL                  0x0c
2506 #define DVO_ENCODER_CONFIG_LOW12BIT                     0x00
2507 #define DVO_ENCODER_CONFIG_UPPER12BIT                  0x04
2508 #define DVO_ENCODER_CONFIG_24BIT                        0x08
2509 
2510 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
2511 {
2512   USHORT usPixelClock;
2513   UCHAR  ucDVOConfig;
2514   UCHAR  ucAction;                                          //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
2515   UCHAR  ucReseved[4];
2516 }DVO_ENCODER_CONTROL_PARAMETERS_V3;
2517 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3   DVO_ENCODER_CONTROL_PARAMETERS_V3
2518 
2519 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V1_4
2520 {
2521   USHORT usPixelClock;
2522   UCHAR  ucDVOConfig;
2523   UCHAR  ucAction;                                          //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
2524   UCHAR  ucBitPerColor;                       //please refer to definition of PANEL_xBIT_PER_COLOR
2525   UCHAR  ucReseved[3];
2526 }DVO_ENCODER_CONTROL_PARAMETERS_V1_4;
2527 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V1_4   DVO_ENCODER_CONTROL_PARAMETERS_V1_4
2528 
2529 
2530 //ucTableFormatRevision=1
2531 //ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for
2532 // bit1=0: non-coherent mode
2533 //     =1: coherent mode
2534 
2535 //==========================================================================================
2536 //Only change is here next time when changing encoder parameter definitions again!
2537 #define LVDS_ENCODER_CONTROL_PARAMETERS_LAST     LVDS_ENCODER_CONTROL_PARAMETERS_V3
2538 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST  LVDS_ENCODER_CONTROL_PARAMETERS_LAST
2539 
2540 #define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2541 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
2542 
2543 #define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2544 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
2545 
2546 #define DVO_ENCODER_CONTROL_PARAMETERS_LAST      DVO_ENCODER_CONTROL_PARAMETERS
2547 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST   DVO_ENCODER_CONTROL_PS_ALLOCATION
2548 
2549 //==========================================================================================
2550 #define PANEL_ENCODER_MISC_DUAL                0x01
2551 #define PANEL_ENCODER_MISC_COHERENT            0x02
2552 #define   PANEL_ENCODER_MISC_TMDS_LINKB                0x04
2553 #define   PANEL_ENCODER_MISC_HDMI_TYPE                0x08
2554 
2555 #define PANEL_ENCODER_ACTION_DISABLE           ATOM_DISABLE
2556 #define PANEL_ENCODER_ACTION_ENABLE            ATOM_ENABLE
2557 #define PANEL_ENCODER_ACTION_COHERENTSEQ       (ATOM_ENABLE+1)
2558 
2559 #define PANEL_ENCODER_TRUNCATE_EN              0x01
2560 #define PANEL_ENCODER_TRUNCATE_DEPTH           0x10
2561 #define PANEL_ENCODER_SPATIAL_DITHER_EN        0x01
2562 #define PANEL_ENCODER_SPATIAL_DITHER_DEPTH     0x10
2563 #define PANEL_ENCODER_TEMPORAL_DITHER_EN       0x01
2564 #define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH    0x10
2565 #define PANEL_ENCODER_TEMPORAL_LEVEL_4         0x20
2566 #define PANEL_ENCODER_25FRC_MASK               0x10
2567 #define PANEL_ENCODER_25FRC_E                  0x00
2568 #define PANEL_ENCODER_25FRC_F                  0x10
2569 #define PANEL_ENCODER_50FRC_MASK               0x60
2570 #define PANEL_ENCODER_50FRC_A                  0x00
2571 #define PANEL_ENCODER_50FRC_B                  0x20
2572 #define PANEL_ENCODER_50FRC_C                  0x40
2573 #define PANEL_ENCODER_50FRC_D                  0x60
2574 #define PANEL_ENCODER_75FRC_MASK               0x80
2575 #define PANEL_ENCODER_75FRC_E                  0x00
2576 #define PANEL_ENCODER_75FRC_F                  0x80
2577 
2578 /****************************************************************************/
2579 // Structures used by SetVoltageTable
2580 /****************************************************************************/
2581 #define SET_VOLTAGE_TYPE_ASIC_VDDC             1
2582 #define SET_VOLTAGE_TYPE_ASIC_MVDDC            2
2583 #define SET_VOLTAGE_TYPE_ASIC_MVDDQ            3
2584 #define SET_VOLTAGE_TYPE_ASIC_VDDCI            4
2585 #define SET_VOLTAGE_INIT_MODE                  5
2586 #define SET_VOLTAGE_GET_MAX_VOLTAGE            6               //Gets the Max. voltage for the soldered Asic
2587 
2588 #define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE       0x1
2589 #define SET_ASIC_VOLTAGE_MODE_SOURCE_A         0x2
2590 #define SET_ASIC_VOLTAGE_MODE_SOURCE_B         0x4
2591 
2592 #define   SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE      0x0
2593 #define   SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL      0x1
2594 #define   SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK     0x2
2595 
2596 typedef struct   _SET_VOLTAGE_PARAMETERS
2597 {
2598   UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
2599   UCHAR    ucVoltageMode;               // To set all, to set source A or source B or ...
2600   UCHAR    ucVoltageIndex;              // An index to tell which voltage level
2601   UCHAR    ucReserved;
2602 }SET_VOLTAGE_PARAMETERS;
2603 
2604 typedef struct   _SET_VOLTAGE_PARAMETERS_V2
2605 {
2606   UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
2607   UCHAR    ucVoltageMode;               // Not used, maybe use for state machine for differen power mode
2608   USHORT   usVoltageLevel;              // real voltage level
2609 }SET_VOLTAGE_PARAMETERS_V2;
2610 
2611 // used by both SetVoltageTable v1.3 and v1.4
2612 typedef struct   _SET_VOLTAGE_PARAMETERS_V1_3
2613 {
2614   UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
2615   UCHAR    ucVoltageMode;               // Indicate action: Set voltage level
2616   USHORT   usVoltageLevel;              // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. )
2617 }SET_VOLTAGE_PARAMETERS_V1_3;
2618 
2619 //ucVoltageType
2620 #define VOLTAGE_TYPE_VDDC                    1
2621 #define VOLTAGE_TYPE_MVDDC                   2
2622 #define VOLTAGE_TYPE_MVDDQ                   3
2623 #define VOLTAGE_TYPE_VDDCI                   4
2624 #define VOLTAGE_TYPE_VDDGFX                  5
2625 #define VOLTAGE_TYPE_PCC                     6
2626 #define VOLTAGE_TYPE_MVPP                    7
2627 #define VOLTAGE_TYPE_LEDDPM                  8
2628 #define VOLTAGE_TYPE_PCC_MVDD                9
2629 #define VOLTAGE_TYPE_PCIE_VDDC               10
2630 #define VOLTAGE_TYPE_PCIE_VDDR               11
2631 
2632 #define VOLTAGE_TYPE_GENERIC_I2C_1           0x11
2633 #define VOLTAGE_TYPE_GENERIC_I2C_2           0x12
2634 #define VOLTAGE_TYPE_GENERIC_I2C_3           0x13
2635 #define VOLTAGE_TYPE_GENERIC_I2C_4           0x14
2636 #define VOLTAGE_TYPE_GENERIC_I2C_5           0x15
2637 #define VOLTAGE_TYPE_GENERIC_I2C_6           0x16
2638 #define VOLTAGE_TYPE_GENERIC_I2C_7           0x17
2639 #define VOLTAGE_TYPE_GENERIC_I2C_8           0x18
2640 #define VOLTAGE_TYPE_GENERIC_I2C_9           0x19
2641 #define VOLTAGE_TYPE_GENERIC_I2C_10          0x1A
2642 
2643 //SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode
2644 #define ATOM_SET_VOLTAGE                     0        //Set voltage Level
2645 #define ATOM_INIT_VOLTAGE_REGULATOR          3        //Init Regulator
2646 #define ATOM_SET_VOLTAGE_PHASE               4        //Set Vregulator Phase, only for SVID/PVID regulator
2647 #define ATOM_GET_MAX_VOLTAGE                 6        //Get Max Voltage, not used from SetVoltageTable v1.3
2648 #define ATOM_GET_VOLTAGE_LEVEL               6        //Get Voltage level from vitual voltage ID, not used for SetVoltage v1.4
2649 #define ATOM_GET_LEAKAGE_ID                  8        //Get Leakage Voltage Id ( starting from SMU7x IP ), SetVoltage v1.4
2650 
2651 // define vitual voltage id in usVoltageLevel
2652 #define ATOM_VIRTUAL_VOLTAGE_ID0             0xff01
2653 #define ATOM_VIRTUAL_VOLTAGE_ID1             0xff02
2654 #define ATOM_VIRTUAL_VOLTAGE_ID2             0xff03
2655 #define ATOM_VIRTUAL_VOLTAGE_ID3             0xff04
2656 #define ATOM_VIRTUAL_VOLTAGE_ID4             0xff05
2657 #define ATOM_VIRTUAL_VOLTAGE_ID5             0xff06
2658 #define ATOM_VIRTUAL_VOLTAGE_ID6             0xff07
2659 #define ATOM_VIRTUAL_VOLTAGE_ID7             0xff08
2660 
2661 typedef struct _SET_VOLTAGE_PS_ALLOCATION
2662 {
2663   SET_VOLTAGE_PARAMETERS sASICSetVoltage;
2664   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
2665 }SET_VOLTAGE_PS_ALLOCATION;
2666 
2667 // New Added from SI for GetVoltageInfoTable, input parameter structure
2668 typedef struct  _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1
2669 {
2670   UCHAR    ucVoltageType;               // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
2671   UCHAR    ucVoltageMode;               // Input: Indicate action: Get voltage info
2672   USHORT   usVoltageLevel;              // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
2673   ULONG    ulReserved;
2674 }GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1;
2675 
2676 // New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID
2677 typedef struct  _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
2678 {
2679   ULONG    ulVotlageGpioState;
2680   ULONG    ulVoltageGPioMask;
2681 }GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
2682 
2683 // New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID
2684 typedef struct  _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
2685 {
2686   USHORT   usVoltageLevel;
2687   USHORT   usVoltageId;                                  // Voltage Id programmed in Voltage Regulator
2688   ULONG    ulReseved;
2689 }GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
2690 
2691 // GetVoltageInfo v1.1 ucVoltageMode
2692 #define ATOM_GET_VOLTAGE_VID                0x00
2693 #define ATOM_GET_VOTLAGE_INIT_SEQ           0x03
2694 #define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID   0x04
2695 #define ATOM_GET_VOLTAGE_SVID2              0x07        //Get SVI2 Regulator Info
2696 
2697 // for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
2698 #define   ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
2699 // for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state
2700 #define   ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11
2701 
2702 #define   ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12
2703 #define   ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13
2704 
2705 
2706 // New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure
2707 typedef struct  _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2
2708 {
2709   UCHAR    ucVoltageType;               // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
2710   UCHAR    ucVoltageMode;               // Input: Indicate action: Get voltage info
2711   USHORT   usVoltageLevel;              // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
2712   ULONG    ulSCLKFreq;                  // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table
2713 }GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2;
2714 
2715 // New in GetVoltageInfo v1.2 ucVoltageMode
2716 #define ATOM_GET_VOLTAGE_EVV_VOLTAGE        0x09
2717 
2718 // New Added from CI Hawaii for EVV feature
2719 typedef struct  _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2
2720 {
2721   USHORT   usVoltageLevel;                               // real voltage level in unit of mv
2722   USHORT   usVoltageId;                                  // Voltage Id programmed in Voltage Regulator
2723   USHORT   usTDP_Current;                                // TDP_Current in unit of  0.01A
2724   USHORT   usTDP_Power;                                  // TDP_Current in unit  of 0.1W
2725 }GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2;
2726 
2727 
2728 // New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure
2729 typedef struct  _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_3
2730 {
2731   UCHAR    ucVoltageType;               // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
2732   UCHAR    ucVoltageMode;               // Input: Indicate action: Get voltage info
2733   USHORT   usVoltageLevel;              // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
2734   ULONG    ulSCLKFreq;                  // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table
2735   ULONG    ulReserved[3];
2736 }GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_3;
2737 
2738 // New Added from CI Hawaii for EVV feature
2739 typedef struct  _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3
2740 {
2741   ULONG    ulVoltageLevel;                               // real voltage level in unit of 0.01mv
2742   ULONG    ulReserved[4];
2743 }GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3;
2744 
2745 
2746 /****************************************************************************/
2747 // Structures used by GetSMUClockInfo
2748 /****************************************************************************/
2749 typedef struct  _GET_SMU_CLOCK_INFO_INPUT_PARAMETER_V2_1
2750 {
2751   ULONG ulDfsPllOutputFreq:24;
2752   ULONG ucDfsDivider:8;
2753 }GET_SMU_CLOCK_INFO_INPUT_PARAMETER_V2_1;
2754 
2755 typedef struct  _GET_SMU_CLOCK_INFO_OUTPUT_PARAMETER_V2_1
2756 {
2757   ULONG ulDfsOutputFreq;
2758 }GET_SMU_CLOCK_INFO_OUTPUT_PARAMETER_V2_1;
2759 
2760 /****************************************************************************/
2761 // Structures used by TVEncoderControlTable
2762 /****************************************************************************/
2763 typedef struct _TV_ENCODER_CONTROL_PARAMETERS
2764 {
2765   USHORT usPixelClock;                // in 10KHz; for bios convenient
2766   UCHAR  ucTvStandard;                // See definition "ATOM_TV_NTSC ..."
2767   UCHAR  ucAction;                    // 0: turn off encoder
2768                                       // 1: setup and turn on encoder
2769 }TV_ENCODER_CONTROL_PARAMETERS;
2770 
2771 typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION
2772 {
2773   TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
2774   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION    sReserved; // Don't set this one
2775 }TV_ENCODER_CONTROL_PS_ALLOCATION;
2776 
2777 //==============================Data Table Portion====================================
2778 
2779 
2780 /****************************************************************************/
2781 // Structure used in Data.mtb
2782 /****************************************************************************/
2783 typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
2784 {
2785   USHORT        UtilityPipeLine;          // Offest for the utility to get parser info,Don't change this position!
2786   USHORT        MultimediaCapabilityInfo; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios
2787   USHORT        MultimediaConfigInfo;     // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
2788   USHORT        StandardVESA_Timing;      // Only used by Bios
2789   USHORT        FirmwareInfo;             // Shared by various SW components,latest version 1.4
2790   USHORT        PaletteData;              // Only used by BIOS
2791   USHORT        LCD_Info;                 // Shared by various SW components,latest version 1.3, was called LVDS_Info
2792   USHORT        DIGTransmitterInfo;       // Internal used by VBIOS only version 3.1
2793   USHORT        SMU_Info;                 // Shared by various SW components,latest version 1.1
2794   USHORT        SupportedDevicesInfo;     // Will be obsolete from R600
2795   USHORT        GPIO_I2C_Info;            // Shared by various SW components,latest version 1.2 will be used from R600
2796   USHORT        VRAM_UsageByFirmware;     // Shared by various SW components,latest version 1.3 will be used from R600
2797   USHORT        GPIO_Pin_LUT;             // Shared by various SW components,latest version 1.1
2798   USHORT        VESA_ToInternalModeLUT;   // Only used by Bios
2799   USHORT        GFX_Info;                 // Shared by various SW components,latest version 2.1 will be used from R600
2800   USHORT        PowerPlayInfo;            // Shared by various SW components,latest version 2.1,new design from R600
2801   USHORT        GPUVirtualizationInfo;    // Will be obsolete from R600
2802   USHORT        SaveRestoreInfo;          // Only used by Bios
2803   USHORT        PPLL_SS_Info;             // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info
2804   USHORT        OemInfo;                  // Defined and used by external SW, should be obsolete soon
2805   USHORT        XTMDS_Info;               // Will be obsolete from R600
2806   USHORT        MclkSS_Info;              // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used
2807   USHORT        Object_Header;            // Shared by various SW components,latest version 1.1
2808   USHORT        IndirectIOAccess;         // Only used by Bios,this table position can't change at all!!
2809   USHORT        MC_InitParameter;         // Only used by command table
2810   USHORT        ASIC_VDDC_Info;           // Will be obsolete from R600
2811   USHORT        ASIC_InternalSS_Info;     // New tabel name from R600, used to be called "ASIC_MVDDC_Info"
2812   USHORT        TV_VideoMode;             // Only used by command table
2813   USHORT        VRAM_Info;                // Only used by command table, latest version 1.3
2814   USHORT        MemoryTrainingInfo;       // Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1
2815   USHORT        IntegratedSystemInfo;     // Shared by various SW components
2816   USHORT        ASIC_ProfilingInfo;       // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600
2817   USHORT        VoltageObjectInfo;        // Shared by various SW components, latest version 1.1
2818   USHORT        PowerSourceInfo;          // Shared by various SW components, latest versoin 1.1
2819   USHORT        ServiceInfo;
2820 }ATOM_MASTER_LIST_OF_DATA_TABLES;
2821 
2822 typedef struct _ATOM_MASTER_DATA_TABLE
2823 {
2824   ATOM_COMMON_TABLE_HEADER sHeader;
2825   ATOM_MASTER_LIST_OF_DATA_TABLES   ListOfDataTables;
2826 }ATOM_MASTER_DATA_TABLE;
2827 
2828 // For backward compatible
2829 #define LVDS_Info                LCD_Info
2830 #define DAC_Info                 PaletteData
2831 #define TMDS_Info                DIGTransmitterInfo
2832 #define CompassionateData        GPUVirtualizationInfo
2833 #define AnalogTV_Info            SMU_Info
2834 #define ComponentVideoInfo       GFX_Info
2835 
2836 /****************************************************************************/
2837 // Structure used in MultimediaCapabilityInfoTable
2838 /****************************************************************************/
2839 typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO
2840 {
2841   ATOM_COMMON_TABLE_HEADER sHeader;
2842   ULONG                    ulSignature;      // HW info table signature string "$ATI"
2843   UCHAR                    ucI2C_Type;       // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc)
2844   UCHAR                    ucTV_OutInfo;     // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7)
2845   UCHAR                    ucVideoPortInfo;  // Provides the video port capabilities
2846   UCHAR                    ucHostPortInfo;   // Provides host port configuration information
2847 }ATOM_MULTIMEDIA_CAPABILITY_INFO;
2848 
2849 
2850 /****************************************************************************/
2851 // Structure used in MultimediaConfigInfoTable
2852 /****************************************************************************/
2853 typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
2854 {
2855   ATOM_COMMON_TABLE_HEADER sHeader;
2856   ULONG                    ulSignature;      // MM info table signature sting "$MMT"
2857   UCHAR                    ucTunerInfo;      // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5)
2858   UCHAR                    ucAudioChipInfo;  // List the audio chip type (3:0) product type (4) and OEM revision (7:5)
2859   UCHAR                    ucProductID;      // Defines as OEM ID or ATI board ID dependent on product type setting
2860   UCHAR                    ucMiscInfo1;      // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7)
2861   UCHAR                    ucMiscInfo2;      // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6)
2862   UCHAR                    ucMiscInfo3;      // Video Decoder Type (3:0) Video In Standard/Crystal (7:4)
2863   UCHAR                    ucMiscInfo4;      // Video Decoder Host Config (2:0) reserved (7:3)
2864   UCHAR                    ucVideoInput0Info;// Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2865   UCHAR                    ucVideoInput1Info;// Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2866   UCHAR                    ucVideoInput2Info;// Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2867   UCHAR                    ucVideoInput3Info;// Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2868   UCHAR                    ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2869 }ATOM_MULTIMEDIA_CONFIG_INFO;
2870 
2871 
2872 /****************************************************************************/
2873 // Structures used in FirmwareInfoTable
2874 /****************************************************************************/
2875 
2876 // usBIOSCapability Defintion:
2877 // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted;
2878 // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported;
2879 // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported;
2880 // Others: Reserved
2881 #define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED         0x0001
2882 #define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT            0x0002
2883 #define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT     0x0004
2884 #define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT      0x0008      // (valid from v1.1 ~v1.4):=1: memclk SS enable, =0 memclk SS disable.
2885 #define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT      0x0010      // (valid from v1.1 ~v1.4):=1: engclk SS enable, =0 engclk SS disable.
2886 #define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU         0x0020
2887 #define ATOM_BIOS_INFO_WMI_SUPPORT                  0x0040
2888 #define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM   0x0080
2889 #define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT          0x0100
2890 #define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK        0x1E00
2891 #define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
2892 #define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE  0x4000
2893 #define ATOM_BIOS_INFO_MEMORY_CLOCK_EXT_SS_SUPPORT  0x0008      // (valid from v2.1 ): =1: memclk ss enable with external ss chip
2894 #define ATOM_BIOS_INFO_ENGINE_CLOCK_EXT_SS_SUPPORT  0x0010      // (valid from v2.1 ): =1: engclk ss enable with external ss chip
2895 
2896 
2897 #ifndef _H2INC
2898 
2899 //Please don't add or expand this bitfield structure below, this one will retire soon.!
2900 typedef struct _ATOM_FIRMWARE_CAPABILITY
2901 {
2902 #if ATOM_BIG_ENDIAN
2903   USHORT Reserved:1;
2904   USHORT SCL2Redefined:1;
2905   USHORT PostWithoutModeSet:1;
2906   USHORT HyperMemory_Size:4;
2907   USHORT HyperMemory_Support:1;
2908   USHORT PPMode_Assigned:1;
2909   USHORT WMI_SUPPORT:1;
2910   USHORT GPUControlsBL:1;
2911   USHORT EngineClockSS_Support:1;
2912   USHORT MemoryClockSS_Support:1;
2913   USHORT ExtendedDesktopSupport:1;
2914   USHORT DualCRTC_Support:1;
2915   USHORT FirmwarePosted:1;
2916 #else
2917   USHORT FirmwarePosted:1;
2918   USHORT DualCRTC_Support:1;
2919   USHORT ExtendedDesktopSupport:1;
2920   USHORT MemoryClockSS_Support:1;
2921   USHORT EngineClockSS_Support:1;
2922   USHORT GPUControlsBL:1;
2923   USHORT WMI_SUPPORT:1;
2924   USHORT PPMode_Assigned:1;
2925   USHORT HyperMemory_Support:1;
2926   USHORT HyperMemory_Size:4;
2927   USHORT PostWithoutModeSet:1;
2928   USHORT SCL2Redefined:1;
2929   USHORT Reserved:1;
2930 #endif
2931 }ATOM_FIRMWARE_CAPABILITY;
2932 
2933 typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
2934 {
2935   ATOM_FIRMWARE_CAPABILITY sbfAccess;
2936   USHORT                   susAccess;
2937 }ATOM_FIRMWARE_CAPABILITY_ACCESS;
2938 
2939 #else
2940 
2941 typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
2942 {
2943   USHORT                   susAccess;
2944 }ATOM_FIRMWARE_CAPABILITY_ACCESS;
2945 
2946 #endif
2947 
2948 typedef struct _ATOM_FIRMWARE_INFO
2949 {
2950   ATOM_COMMON_TABLE_HEADER        sHeader;
2951   ULONG                           ulFirmwareRevision;
2952   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2953   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2954   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
2955   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
2956   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
2957   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
2958   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2959   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
2960   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
2961   UCHAR                           ucASICMaxTemperature;
2962   UCHAR                           ucPadding[3];               //Don't use them
2963   ULONG                           aulReservedForBIOS[3];      //Don't use them
2964   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
2965   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
2966   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
2967   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
2968   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
2969   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
2970   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
2971   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
2972   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
2973   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit, the definitions above can't change!!!
2974   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2975   USHORT                          usReferenceClock;           //In 10Khz unit
2976   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
2977   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
2978   UCHAR                           ucDesign_ID;                //Indicate what is the board design
2979   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
2980 }ATOM_FIRMWARE_INFO;
2981 
2982 typedef struct _ATOM_FIRMWARE_INFO_V1_2
2983 {
2984   ATOM_COMMON_TABLE_HEADER        sHeader;
2985   ULONG                           ulFirmwareRevision;
2986   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2987   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2988   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
2989   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
2990   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
2991   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
2992   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2993   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
2994   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
2995   UCHAR                           ucASICMaxTemperature;
2996   UCHAR                           ucMinAllowedBL_Level;
2997   UCHAR                           ucPadding[2];               //Don't use them
2998   ULONG                           aulReservedForBIOS[2];      //Don't use them
2999   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
3000   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
3001   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
3002   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
3003   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
3004   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
3005   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
3006   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
3007   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
3008   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
3009   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
3010   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
3011   USHORT                          usReferenceClock;           //In 10Khz unit
3012   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
3013   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
3014   UCHAR                           ucDesign_ID;                //Indicate what is the board design
3015   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
3016 }ATOM_FIRMWARE_INFO_V1_2;
3017 
3018 typedef struct _ATOM_FIRMWARE_INFO_V1_3
3019 {
3020   ATOM_COMMON_TABLE_HEADER        sHeader;
3021   ULONG                           ulFirmwareRevision;
3022   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
3023   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
3024   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
3025   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
3026   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
3027   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
3028   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
3029   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
3030   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
3031   UCHAR                           ucASICMaxTemperature;
3032   UCHAR                           ucMinAllowedBL_Level;
3033   UCHAR                           ucPadding[2];               //Don't use them
3034   ULONG                           aulReservedForBIOS;         //Don't use them
3035   ULONG                           ul3DAccelerationEngineClock;//In 10Khz unit
3036   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
3037   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
3038   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
3039   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
3040   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
3041   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
3042   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
3043   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
3044   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
3045   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
3046   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
3047   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
3048   USHORT                          usReferenceClock;           //In 10Khz unit
3049   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
3050   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
3051   UCHAR                           ucDesign_ID;                //Indicate what is the board design
3052   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
3053 }ATOM_FIRMWARE_INFO_V1_3;
3054 
3055 typedef struct _ATOM_FIRMWARE_INFO_V1_4
3056 {
3057   ATOM_COMMON_TABLE_HEADER        sHeader;
3058   ULONG                           ulFirmwareRevision;
3059   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
3060   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
3061   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
3062   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
3063   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
3064   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
3065   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
3066   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
3067   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
3068   UCHAR                           ucASICMaxTemperature;
3069   UCHAR                           ucMinAllowedBL_Level;
3070   USHORT                          usBootUpVDDCVoltage;        //In MV unit
3071   USHORT                          usLcdMinPixelClockPLL_Output; // In MHz unit
3072   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
3073   ULONG                           ul3DAccelerationEngineClock;//In 10Khz unit
3074   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
3075   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
3076   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
3077   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
3078   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
3079   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
3080   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
3081   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
3082   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
3083   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
3084   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
3085   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
3086   USHORT                          usReferenceClock;           //In 10Khz unit
3087   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
3088   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
3089   UCHAR                           ucDesign_ID;                //Indicate what is the board design
3090   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
3091 }ATOM_FIRMWARE_INFO_V1_4;
3092 
3093 //the structure below to be used from Cypress
3094 typedef struct _ATOM_FIRMWARE_INFO_V2_1
3095 {
3096   ATOM_COMMON_TABLE_HEADER        sHeader;
3097   ULONG                           ulFirmwareRevision;
3098   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
3099   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
3100   ULONG                           ulReserved1;
3101   ULONG                           ulReserved2;
3102   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
3103   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
3104   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
3105   ULONG                           ulBinaryAlteredInfo;        //Was ulASICMaxEngineClock
3106   ULONG                           ulDefaultDispEngineClkFreq; //In 10Khz unit
3107   UCHAR                           ucReserved1;                //Was ucASICMaxTemperature;
3108   UCHAR                           ucMinAllowedBL_Level;
3109   USHORT                          usBootUpVDDCVoltage;        //In MV unit
3110   USHORT                          usLcdMinPixelClockPLL_Output; // In MHz unit
3111   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
3112   ULONG                           ulReserved4;                //Was ulAsicMaximumVoltage
3113   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
3114   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
3115   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
3116   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
3117   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
3118   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
3119   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
3120   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
3121   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
3122   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
3123   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
3124   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
3125   USHORT                          usCoreReferenceClock;       //In 10Khz unit
3126   USHORT                          usMemoryReferenceClock;     //In 10Khz unit
3127   USHORT                          usUniphyDPModeExtClkFreq;   //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
3128   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
3129   UCHAR                           ucReserved4[3];
3130 
3131 }ATOM_FIRMWARE_INFO_V2_1;
3132 
3133 //the structure below to be used from NI
3134 //ucTableFormatRevision=2
3135 //ucTableContentRevision=2
3136 
3137 typedef struct _PRODUCT_BRANDING
3138 {
3139     UCHAR     ucEMBEDDED_CAP:2;          // Bit[1:0] Embedded feature level
3140     UCHAR     ucReserved:2;              // Bit[3:2] Reserved
3141     UCHAR     ucBRANDING_ID:4;           // Bit[7:4] Branding ID
3142 }PRODUCT_BRANDING;
3143 
3144 typedef struct _ATOM_FIRMWARE_INFO_V2_2
3145 {
3146   ATOM_COMMON_TABLE_HEADER        sHeader;
3147   ULONG                           ulFirmwareRevision;
3148   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
3149   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
3150   ULONG                           ulSPLL_OutputFreq;          //In 10Khz unit
3151   ULONG                           ulGPUPLL_OutputFreq;        //In 10Khz unit
3152   ULONG                           ulReserved1;                //Was ulMaxEngineClockPLL_Output; //In 10Khz unit*
3153   ULONG                           ulReserved2;                //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit*
3154   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
3155   ULONG                           ulBinaryAlteredInfo;        //Was ulASICMaxEngineClock  ?
3156   ULONG                           ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage.
3157   UCHAR                           ucReserved3;                //Was ucASICMaxTemperature;
3158   UCHAR                           ucMinAllowedBL_Level;
3159   USHORT                          usBootUpVDDCVoltage;        //In MV unit
3160   USHORT                          usLcdMinPixelClockPLL_Output; // In MHz unit
3161   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
3162   ULONG                           ulReserved4;                //Was ulAsicMaximumVoltage
3163   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
3164   UCHAR                           ucRemoteDisplayConfig;
3165   UCHAR                           ucReserved5[3];             //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
3166   ULONG                           ulReserved6;                //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
3167   ULONG                           ulReserved7;                //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
3168   USHORT                          usReserved11;               //Was usMaxPixelClock;  //In 10Khz unit, Max.  Pclk used only for DAC
3169   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
3170   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
3171   USHORT                          usBootUpVDDCIVoltage;       //In unit of mv; Was usMinPixelClockPLL_Output;
3172   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
3173   USHORT                          usCoreReferenceClock;       //In 10Khz unit
3174   USHORT                          usMemoryReferenceClock;     //In 10Khz unit
3175   USHORT                          usUniphyDPModeExtClkFreq;   //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
3176   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
3177   UCHAR                           ucCoolingSolution_ID;       //0: Air cooling; 1: Liquid cooling ... [COOLING_SOLUTION]
3178   PRODUCT_BRANDING                ucProductBranding;          // Bit[7:4]ucBRANDING_ID: Branding ID, Bit[3:2]ucReserved: Reserved, Bit[1:0]ucEMBEDDED_CAP: Embedded feature level.
3179   UCHAR                           ucReserved9;
3180   USHORT                          usBootUpMVDDCVoltage;       //In unit of mv; Was usMinPixelClockPLL_Output;
3181   USHORT                          usBootUpVDDGFXVoltage;      //In unit of mv;
3182   ULONG                           ulReserved10[3];            // New added comparing to previous version
3183 }ATOM_FIRMWARE_INFO_V2_2;
3184 
3185 #define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V2_2
3186 
3187 
3188 // definition of ucRemoteDisplayConfig
3189 #define REMOTE_DISPLAY_DISABLE                   0x00
3190 #define REMOTE_DISPLAY_ENABLE                    0x01
3191 
3192 /****************************************************************************/
3193 // Structures used in IntegratedSystemInfoTable
3194 /****************************************************************************/
3195 #define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN      0x2
3196 #define IGP_CAP_FLAG_AC_CARD               0x4
3197 #define IGP_CAP_FLAG_SDVO_CARD             0x8
3198 #define IGP_CAP_FLAG_POSTDIV_BY_2_MODE     0x10
3199 
3200 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO
3201 {
3202   ATOM_COMMON_TABLE_HEADER        sHeader;
3203   ULONG                           ulBootUpEngineClock;          //in 10kHz unit
3204   ULONG                           ulBootUpMemoryClock;          //in 10kHz unit
3205   ULONG                           ulMaxSystemMemoryClock;       //in 10kHz unit
3206   ULONG                           ulMinSystemMemoryClock;       //in 10kHz unit
3207   UCHAR                           ucNumberOfCyclesInPeriodHi;
3208   UCHAR                           ucLCDTimingSel;             //=0:not valid.!=0 sel this timing descriptor from LCD EDID.
3209   USHORT                          usReserved1;
3210   USHORT                          usInterNBVoltageLow;        //An intermidiate PMW value to set the voltage
3211   USHORT                          usInterNBVoltageHigh;       //Another intermidiate PMW value to set the voltage
3212   ULONG                           ulReserved[2];
3213 
3214   USHORT                          usFSBClock;                     //In MHz unit
3215   USHORT                          usCapabilityFlag;              //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable
3216                                                                               //Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card
3217                                                               //Bit[4]==1: P/2 mode, ==0: P/1 mode
3218   USHORT                          usPCIENBCfgReg7;                //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal
3219   USHORT                          usK8MemoryClock;            //in MHz unit
3220   USHORT                          usK8SyncStartDelay;         //in 0.01 us unit
3221   USHORT                          usK8DataReturnTime;         //in 0.01 us unit
3222   UCHAR                           ucMaxNBVoltage;
3223   UCHAR                           ucMinNBVoltage;
3224   UCHAR                           ucMemoryType;                     //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved
3225   UCHAR                           ucNumberOfCyclesInPeriod;      //CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod
3226   UCHAR                           ucStartingPWM_HighTime;     //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime
3227   UCHAR                           ucHTLinkWidth;              //16 bit vs. 8 bit
3228   UCHAR                           ucMaxNBVoltageHigh;
3229   UCHAR                           ucMinNBVoltageHigh;
3230 }ATOM_INTEGRATED_SYSTEM_INFO;
3231 
3232 /* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
3233 ulBootUpMemoryClock:    For Intel IGP,it's the UMA system memory clock
3234                         For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
3235 ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
3236                         For AMD IGP,for now this can be 0
3237 ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
3238                         For AMD IGP,for now this can be 0
3239 
3240 usFSBClock:             For Intel IGP,it's FSB Freq
3241                         For AMD IGP,it's HT Link Speed
3242 
3243 usK8MemoryClock:        For AMD IGP only. For RevF CPU, set it to 200
3244 usK8SyncStartDelay:     For AMD IGP only. Memory access latency in K8, required for watermark calculation
3245 usK8DataReturnTime:     For AMD IGP only. Memory access latency in K8, required for watermark calculation
3246 
3247 VC:Voltage Control
3248 ucMaxNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
3249 ucMinNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
3250 
3251 ucNumberOfCyclesInPeriod:   Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
3252 ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0
3253 
3254 ucMaxNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of  the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
3255 ucMinNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
3256 
3257 
3258 usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
3259 usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
3260 */
3261 
3262 
3263 /*
3264 The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
3265 Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
3266 The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.
3267 
3268 SW components can access the IGP system infor structure in the same way as before
3269 */
3270 
3271 
3272 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
3273 {
3274   ATOM_COMMON_TABLE_HEADER   sHeader;
3275   ULONG                      ulBootUpEngineClock;       //in 10kHz unit
3276   ULONG                      ulReserved1[2];            //must be 0x0 for the reserved
3277   ULONG                      ulBootUpUMAClock;          //in 10kHz unit
3278   ULONG                      ulBootUpSidePortClock;     //in 10kHz unit
3279   ULONG                      ulMinSidePortClock;        //in 10kHz unit
3280   ULONG                      ulReserved2[6];            //must be 0x0 for the reserved
3281   ULONG                      ulSystemConfig;            //see explanation below
3282   ULONG                      ulBootUpReqDisplayVector;
3283   ULONG                      ulOtherDisplayMisc;
3284   ULONG                      ulDDISlot1Config;
3285   ULONG                      ulDDISlot2Config;
3286   UCHAR                      ucMemoryType;              //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
3287   UCHAR                      ucUMAChannelNumber;
3288   UCHAR                      ucDockingPinBit;
3289   UCHAR                      ucDockingPinPolarity;
3290   ULONG                      ulDockingPinCFGInfo;
3291   ULONG                      ulCPUCapInfo;
3292   USHORT                     usNumberOfCyclesInPeriod;
3293   USHORT                     usMaxNBVoltage;
3294   USHORT                     usMinNBVoltage;
3295   USHORT                     usBootUpNBVoltage;
3296   ULONG                      ulHTLinkFreq;              //in 10Khz
3297   USHORT                     usMinHTLinkWidth;
3298   USHORT                     usMaxHTLinkWidth;
3299   USHORT                     usUMASyncStartDelay;
3300   USHORT                     usUMADataReturnTime;
3301   USHORT                     usLinkStatusZeroTime;
3302   USHORT                     usDACEfuse;            //for storing badgap value (for RS880 only)
3303   ULONG                      ulHighVoltageHTLinkFreq;     // in 10Khz
3304   ULONG                      ulLowVoltageHTLinkFreq;      // in 10Khz
3305   USHORT                     usMaxUpStreamHTLinkWidth;
3306   USHORT                     usMaxDownStreamHTLinkWidth;
3307   USHORT                     usMinUpStreamHTLinkWidth;
3308   USHORT                     usMinDownStreamHTLinkWidth;
3309   USHORT                     usFirmwareVersion;         //0 means FW is not supported. Otherwise it's the FW version loaded by SBIOS and driver should enable FW.
3310   USHORT                     usFullT0Time;             // Input to calculate minimum HT link change time required by NB P-State. Unit is 0.01us.
3311   ULONG                      ulReserved3[96];          //must be 0x0
3312 }ATOM_INTEGRATED_SYSTEM_INFO_V2;
3313 
3314 /*
3315 ulBootUpEngineClock:   Boot-up Engine Clock in 10Khz;
3316 ulBootUpUMAClock:      Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
3317 ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock
3318 
3319 ulSystemConfig:
3320 Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
3321 Bit[1]=1: system boots up at AMD overdrived state or user customized  mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
3322       =0: system boots up at driver control state. Power state depends on PowerPlay table.
3323 Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
3324 Bit[3]=1: Only one power state(Performance) will be supported.
3325       =0: Multiple power states supported from PowerPlay table.
3326 Bit[4]=1: CLMC is supported and enabled on current system.
3327       =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
3328 Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
3329       =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
3330 Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
3331       =0: Voltage settings is determined by powerplay table.
3332 Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
3333       =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.
3334 Bit[8]=1: CDLF is supported and enabled on current system.
3335       =0: CDLF is not supported or enabled on current system.
3336 Bit[9]=1: DLL Shut Down feature is enabled on current system.
3337       =0: DLL Shut Down feature is not enabled or supported on current system.
3338 
3339 ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.
3340 
3341 ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
3342                        [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSuppportedStd definition;
3343 
3344 ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
3345       [3:0]  - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
3346          [7:4]  - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 4=1 lane 3:0; bit 5=1 lane 7:4; bit 6=1 lane 11:8; bit 7=1 lane 15:12)
3347       When a DDI connector is not "paired" (meaming two connections mutualexclusive on chassis or docking, only one of them can be connected at one time.
3348       in both chassis and docking, SBIOS has to duplicate the same PCIE lane info from chassis to docking or vice versa. For example:
3349       one DDI connector is only populated in docking with PCIE lane 8-11, but there is no paired connection on chassis, SBIOS has to copy bit 6 to bit 2.
3350 
3351          [15:8] - Lane configuration attribute;
3352       [23:16]- Connector type, possible value:
3353                CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
3354                CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
3355                CONNECTOR_OBJECT_ID_HDMI_TYPE_A
3356                CONNECTOR_OBJECT_ID_DISPLAYPORT
3357                CONNECTOR_OBJECT_ID_eDP
3358          [31:24]- Reserved
3359 
3360 ulDDISlot2Config: Same as Slot1.
3361 ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
3362 For IGP, Hypermemory is the only memory type showed in CCC.
3363 
3364 ucUMAChannelNumber:  how many channels for the UMA;
3365 
3366 ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
3367 ucDockingPinBit:     which bit in this register to read the pin status;
3368 ucDockingPinPolarity:Polarity of the pin when docked;
3369 
3370 ulCPUCapInfo:        [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0
3371 
3372 usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
3373 
3374 usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
3375 usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
3376                     GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
3377                     PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
3378                     GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
3379 
3380 usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
3381 
3382 
3383 ulHTLinkFreq:       Bootup HT link Frequency in 10Khz.
3384 usMinHTLinkWidth:   Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
3385                     If CDLW enabled, both upstream and downstream width should be the same during bootup.
3386 usMaxHTLinkWidth:   Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
3387                     If CDLW enabled, both upstream and downstream width should be the same during bootup.
3388 
3389 usUMASyncStartDelay: Memory access latency, required for watermark calculation
3390 usUMADataReturnTime: Memory access latency, required for watermark calculation
3391 usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
3392 for Griffin or Greyhound. SBIOS needs to convert to actual time by:
3393                      if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
3394                      if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
3395                      if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
3396                      if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)
3397 
3398 ulHighVoltageHTLinkFreq:     HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
3399                              This must be less than or equal to ulHTLinkFreq(bootup frequency).
3400 ulLowVoltageHTLinkFreq:      HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
3401                              This must be less than or equal to ulHighVoltageHTLinkFreq.
3402 
3403 usMaxUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
3404 usMaxDownStreamHTLinkWidth:  same as above.
3405 usMinUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
3406 usMinDownStreamHTLinkWidth:  same as above.
3407 */
3408 
3409 // ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo  - CPU type definition
3410 #define    INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU             0
3411 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN        1
3412 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND      2
3413 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__K8             3
3414 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH        4
3415 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI         5
3416 
3417 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE       INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI    // this deff reflects max defined CPU code
3418 
3419 #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE                 0x00000001
3420 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE             0x00000002
3421 #define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE                  0x00000004
3422 #define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY         0x00000008
3423 #define SYSTEM_CONFIG_CLMC_ENABLED                        0x00000010
3424 #define SYSTEM_CONFIG_CDLW_ENABLED                        0x00000020
3425 #define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED              0x00000040
3426 #define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED            0x00000080
3427 #define SYSTEM_CONFIG_CDLF_ENABLED                        0x00000100
3428 #define SYSTEM_CONFIG_DLL_SHUTDOWN_ENABLED                0x00000200
3429 
3430 #define IGP_DDI_SLOT_LANE_CONFIG_MASK                     0x000000FF
3431 
3432 #define b0IGP_DDI_SLOT_LANE_MAP_MASK                      0x0F
3433 #define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK              0xF0
3434 #define b0IGP_DDI_SLOT_CONFIG_LANE_0_3                    0x01
3435 #define b0IGP_DDI_SLOT_CONFIG_LANE_4_7                    0x02
3436 #define b0IGP_DDI_SLOT_CONFIG_LANE_8_11                   0x04
3437 #define b0IGP_DDI_SLOT_CONFIG_LANE_12_15                  0x08
3438 
3439 #define IGP_DDI_SLOT_ATTRIBUTE_MASK                       0x0000FF00
3440 #define IGP_DDI_SLOT_CONFIG_REVERSED                      0x00000100
3441 #define b1IGP_DDI_SLOT_CONFIG_REVERSED                    0x01
3442 
3443 #define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK                  0x00FF0000
3444 
3445 // IntegratedSystemInfoTable new Rev is V5 after V2, because of the real rev of V2 is v1.4. This rev is used for RR
3446 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5
3447 {
3448   ATOM_COMMON_TABLE_HEADER   sHeader;
3449   ULONG                        ulBootUpEngineClock;       //in 10kHz unit
3450   ULONG                      ulDentistVCOFreq;          //Dentist VCO clock in 10kHz unit, the source of GPU SCLK, LCLK, UCLK and VCLK.
3451   ULONG                      ulLClockFreq;              //GPU Lclk freq in 10kHz unit, have relationship with NCLK in NorthBridge
3452   ULONG                        ulBootUpUMAClock;          //in 10kHz unit
3453   ULONG                      ulReserved1[8];            //must be 0x0 for the reserved
3454   ULONG                      ulBootUpReqDisplayVector;
3455   ULONG                      ulOtherDisplayMisc;
3456   ULONG                      ulReserved2[4];            //must be 0x0 for the reserved
3457   ULONG                      ulSystemConfig;            //TBD
3458   ULONG                      ulCPUCapInfo;              //TBD
3459   USHORT                     usMaxNBVoltage;            //high NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
3460   USHORT                     usMinNBVoltage;            //low NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
3461   USHORT                     usBootUpNBVoltage;         //boot up NB voltage
3462   UCHAR                      ucHtcTmpLmt;               //bit [22:16] of D24F3x64 Hardware Thermal Control (HTC) Register, may not be needed, TBD
3463   UCHAR                      ucTjOffset;                //bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed, TBD
3464   ULONG                      ulReserved3[4];            //must be 0x0 for the reserved
3465   ULONG                      ulDDISlot1Config;          //see above ulDDISlot1Config definition
3466   ULONG                      ulDDISlot2Config;
3467   ULONG                      ulDDISlot3Config;
3468   ULONG                      ulDDISlot4Config;
3469   ULONG                      ulReserved4[4];            //must be 0x0 for the reserved
3470   UCHAR                      ucMemoryType;              //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
3471   UCHAR                      ucUMAChannelNumber;
3472   USHORT                     usReserved;
3473   ULONG                      ulReserved5[4];            //must be 0x0 for the reserved
3474   ULONG                      ulCSR_M3_ARB_CNTL_DEFAULT[10];//arrays with values for CSR M3 arbiter for default
3475   ULONG                      ulCSR_M3_ARB_CNTL_UVD[10]; //arrays with values for CSR M3 arbiter for UVD playback
3476   ULONG                      ulCSR_M3_ARB_CNTL_FS3D[10];//arrays with values for CSR M3 arbiter for Full Screen 3D applications
3477   ULONG                      ulReserved6[61];           //must be 0x0
3478 }ATOM_INTEGRATED_SYSTEM_INFO_V5;
3479 
3480 
3481 
3482 /****************************************************************************/
3483 // Structure used in GPUVirtualizationInfoTable
3484 /****************************************************************************/
3485 typedef struct _ATOM_GPU_VIRTUALIZATION_INFO_V2_1
3486 {
3487   ATOM_COMMON_TABLE_HEADER   sHeader;
3488   ULONG ulMCUcodeRomStartAddr;
3489   ULONG ulMCUcodeLength;
3490   ULONG ulSMCUcodeRomStartAddr;
3491   ULONG ulSMCUcodeLength;
3492   ULONG ulRLCVUcodeRomStartAddr;
3493   ULONG ulRLCVUcodeLength;
3494   ULONG ulTOCUcodeStartAddr;
3495   ULONG ulTOCUcodeLength;
3496   ULONG ulSMCPatchTableStartAddr;
3497   ULONG ulSmcPatchTableLength;
3498   ULONG ulSystemFlag;
3499 }ATOM_GPU_VIRTUALIZATION_INFO_V2_1;
3500 
3501 
3502 #define ATOM_CRT_INT_ENCODER1_INDEX                       0x00000000
3503 #define ATOM_LCD_INT_ENCODER1_INDEX                       0x00000001
3504 #define ATOM_TV_INT_ENCODER1_INDEX                        0x00000002
3505 #define ATOM_DFP_INT_ENCODER1_INDEX                       0x00000003
3506 #define ATOM_CRT_INT_ENCODER2_INDEX                       0x00000004
3507 #define ATOM_LCD_EXT_ENCODER1_INDEX                       0x00000005
3508 #define ATOM_TV_EXT_ENCODER1_INDEX                        0x00000006
3509 #define ATOM_DFP_EXT_ENCODER1_INDEX                       0x00000007
3510 #define ATOM_CV_INT_ENCODER1_INDEX                        0x00000008
3511 #define ATOM_DFP_INT_ENCODER2_INDEX                       0x00000009
3512 #define ATOM_CRT_EXT_ENCODER1_INDEX                       0x0000000A
3513 #define ATOM_CV_EXT_ENCODER1_INDEX                        0x0000000B
3514 #define ATOM_DFP_INT_ENCODER3_INDEX                       0x0000000C
3515 #define ATOM_DFP_INT_ENCODER4_INDEX                       0x0000000D
3516 
3517 // define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSelTable
3518 #define ASIC_INT_DAC1_ENCODER_ID                                     0x00
3519 #define ASIC_INT_TV_ENCODER_ID                                       0x02
3520 #define ASIC_INT_DIG1_ENCODER_ID                                     0x03
3521 #define ASIC_INT_DAC2_ENCODER_ID                                     0x04
3522 #define ASIC_EXT_TV_ENCODER_ID                                       0x06
3523 #define ASIC_INT_DVO_ENCODER_ID                                      0x07
3524 #define ASIC_INT_DIG2_ENCODER_ID                                     0x09
3525 #define ASIC_EXT_DIG_ENCODER_ID                                      0x05
3526 #define ASIC_EXT_DIG2_ENCODER_ID                                     0x08
3527 #define ASIC_INT_DIG3_ENCODER_ID                                     0x0a
3528 #define ASIC_INT_DIG4_ENCODER_ID                                     0x0b
3529 #define ASIC_INT_DIG5_ENCODER_ID                                     0x0c
3530 #define ASIC_INT_DIG6_ENCODER_ID                                     0x0d
3531 #define ASIC_INT_DIG7_ENCODER_ID                                     0x0e
3532 
3533 //define Encoder attribute
3534 #define ATOM_ANALOG_ENCODER                                                0
3535 #define ATOM_DIGITAL_ENCODER                                             1
3536 #define ATOM_DP_ENCODER                                                   2
3537 
3538 #define ATOM_ENCODER_ENUM_MASK                            0x70
3539 #define ATOM_ENCODER_ENUM_ID1                             0x00
3540 #define ATOM_ENCODER_ENUM_ID2                             0x10
3541 #define ATOM_ENCODER_ENUM_ID3                             0x20
3542 #define ATOM_ENCODER_ENUM_ID4                             0x30
3543 #define ATOM_ENCODER_ENUM_ID5                             0x40
3544 #define ATOM_ENCODER_ENUM_ID6                             0x50
3545 
3546 #define ATOM_DEVICE_CRT1_INDEX                            0x00000000
3547 #define ATOM_DEVICE_LCD1_INDEX                            0x00000001
3548 #define ATOM_DEVICE_TV1_INDEX                             0x00000002
3549 #define ATOM_DEVICE_DFP1_INDEX                            0x00000003
3550 #define ATOM_DEVICE_CRT2_INDEX                            0x00000004
3551 #define ATOM_DEVICE_LCD2_INDEX                            0x00000005
3552 #define ATOM_DEVICE_DFP6_INDEX                            0x00000006
3553 #define ATOM_DEVICE_DFP2_INDEX                            0x00000007
3554 #define ATOM_DEVICE_CV_INDEX                              0x00000008
3555 #define ATOM_DEVICE_DFP3_INDEX                            0x00000009
3556 #define ATOM_DEVICE_DFP4_INDEX                            0x0000000A
3557 #define ATOM_DEVICE_DFP5_INDEX                            0x0000000B
3558 
3559 #define ATOM_DEVICE_RESERVEDC_INDEX                       0x0000000C
3560 #define ATOM_DEVICE_RESERVEDD_INDEX                       0x0000000D
3561 #define ATOM_DEVICE_RESERVEDE_INDEX                       0x0000000E
3562 #define ATOM_DEVICE_RESERVEDF_INDEX                       0x0000000F
3563 #define ATOM_MAX_SUPPORTED_DEVICE_INFO                    (ATOM_DEVICE_DFP3_INDEX+1)
3564 #define ATOM_MAX_SUPPORTED_DEVICE_INFO_2                  ATOM_MAX_SUPPORTED_DEVICE_INFO
3565 #define ATOM_MAX_SUPPORTED_DEVICE_INFO_3                  (ATOM_DEVICE_DFP5_INDEX + 1 )
3566 
3567 #define ATOM_MAX_SUPPORTED_DEVICE                         (ATOM_DEVICE_RESERVEDF_INDEX+1)
3568 
3569 #define ATOM_DEVICE_CRT1_SUPPORT                          (0x1L << ATOM_DEVICE_CRT1_INDEX )
3570 #define ATOM_DEVICE_LCD1_SUPPORT                          (0x1L << ATOM_DEVICE_LCD1_INDEX )
3571 #define ATOM_DEVICE_TV1_SUPPORT                           (0x1L << ATOM_DEVICE_TV1_INDEX  )
3572 #define ATOM_DEVICE_DFP1_SUPPORT                          (0x1L << ATOM_DEVICE_DFP1_INDEX )
3573 #define ATOM_DEVICE_CRT2_SUPPORT                          (0x1L << ATOM_DEVICE_CRT2_INDEX )
3574 #define ATOM_DEVICE_LCD2_SUPPORT                          (0x1L << ATOM_DEVICE_LCD2_INDEX )
3575 #define ATOM_DEVICE_DFP6_SUPPORT                          (0x1L << ATOM_DEVICE_DFP6_INDEX )
3576 #define ATOM_DEVICE_DFP2_SUPPORT                          (0x1L << ATOM_DEVICE_DFP2_INDEX )
3577 #define ATOM_DEVICE_CV_SUPPORT                            (0x1L << ATOM_DEVICE_CV_INDEX   )
3578 #define ATOM_DEVICE_DFP3_SUPPORT                          (0x1L << ATOM_DEVICE_DFP3_INDEX )
3579 #define ATOM_DEVICE_DFP4_SUPPORT                          (0x1L << ATOM_DEVICE_DFP4_INDEX )
3580 #define ATOM_DEVICE_DFP5_SUPPORT                          (0x1L << ATOM_DEVICE_DFP5_INDEX )
3581 
3582 
3583 #define ATOM_DEVICE_CRT_SUPPORT                           (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT)
3584 #define ATOM_DEVICE_DFP_SUPPORT                           (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT |  ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT | ATOM_DEVICE_DFP6_SUPPORT)
3585 #define ATOM_DEVICE_TV_SUPPORT                            ATOM_DEVICE_TV1_SUPPORT
3586 #define ATOM_DEVICE_LCD_SUPPORT                           (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT)
3587 
3588 #define ATOM_DEVICE_CONNECTOR_TYPE_MASK                   0x000000F0
3589 #define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT                  0x00000004
3590 #define ATOM_DEVICE_CONNECTOR_VGA                         0x00000001
3591 #define ATOM_DEVICE_CONNECTOR_DVI_I                       0x00000002
3592 #define ATOM_DEVICE_CONNECTOR_DVI_D                       0x00000003
3593 #define ATOM_DEVICE_CONNECTOR_DVI_A                       0x00000004
3594 #define ATOM_DEVICE_CONNECTOR_SVIDEO                      0x00000005
3595 #define ATOM_DEVICE_CONNECTOR_COMPOSITE                   0x00000006
3596 #define ATOM_DEVICE_CONNECTOR_LVDS                        0x00000007
3597 #define ATOM_DEVICE_CONNECTOR_DIGI_LINK                   0x00000008
3598 #define ATOM_DEVICE_CONNECTOR_SCART                       0x00000009
3599 #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A                 0x0000000A
3600 #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B                 0x0000000B
3601 #define ATOM_DEVICE_CONNECTOR_CASE_1                      0x0000000E
3602 #define ATOM_DEVICE_CONNECTOR_DISPLAYPORT                 0x0000000F
3603 
3604 
3605 #define ATOM_DEVICE_DAC_INFO_MASK                         0x0000000F
3606 #define ATOM_DEVICE_DAC_INFO_SHIFT                        0x00000000
3607 #define ATOM_DEVICE_DAC_INFO_NODAC                        0x00000000
3608 #define ATOM_DEVICE_DAC_INFO_DACA                         0x00000001
3609 #define ATOM_DEVICE_DAC_INFO_DACB                         0x00000002
3610 #define ATOM_DEVICE_DAC_INFO_EXDAC                        0x00000003
3611 
3612 #define ATOM_DEVICE_I2C_ID_NOI2C                          0x00000000
3613 
3614 #define ATOM_DEVICE_I2C_LINEMUX_MASK                      0x0000000F
3615 #define ATOM_DEVICE_I2C_LINEMUX_SHIFT                     0x00000000
3616 
3617 #define ATOM_DEVICE_I2C_ID_MASK                           0x00000070
3618 #define ATOM_DEVICE_I2C_ID_SHIFT                          0x00000004
3619 #define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE              0x00000001
3620 #define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE                  0x00000002
3621 #define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE                0x00000003    //For IGP RS600
3622 #define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL                 0x00000004    //For IGP RS690
3623 
3624 #define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK                 0x00000080
3625 #define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT                0x00000007
3626 #define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C            0x00000000
3627 #define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C            0x00000001
3628 
3629 //  usDeviceSupport:
3630 //  Bits0   = 0 - no CRT1 support= 1- CRT1 is supported
3631 //  Bit 1   = 0 - no LCD1 support= 1- LCD1 is supported
3632 //  Bit 2   = 0 - no TV1  support= 1- TV1  is supported
3633 //  Bit 3   = 0 - no DFP1 support= 1- DFP1 is supported
3634 //  Bit 4   = 0 - no CRT2 support= 1- CRT2 is supported
3635 //  Bit 5   = 0 - no LCD2 support= 1- LCD2 is supported
3636 //  Bit 6   = 0 - no DFP6 support= 1- DFP6 is supported
3637 //  Bit 7   = 0 - no DFP2 support= 1- DFP2 is supported
3638 //  Bit 8   = 0 - no CV   support= 1- CV   is supported
3639 //  Bit 9   = 0 - no DFP3 support= 1- DFP3 is supported
3640 //  Bit 10= 0 - no DFP4 support= 1- DFP4 is supported
3641 //  Bit 11= 0 - no DFP5 support= 1- DFP5 is supported
3642 //
3643 //
3644 
3645 /****************************************************************************/
3646 // Structure used in MclkSS_InfoTable
3647 /****************************************************************************/
3648 //      ucI2C_ConfigID
3649 //    [7:0] - I2C LINE Associate ID
3650 //          = 0   - no I2C
3651 //    [7]      -   HW_Cap        =   1,  [6:0]=HW assisted I2C ID(HW line selection)
3652 //                          =   0,  [6:0]=SW assisted I2C ID
3653 //    [6-4]   - HW_ENGINE_ID  =   1,  HW engine for NON multimedia use
3654 //                          =   2,   HW engine for Multimedia use
3655 //                          =   3-7   Reserved for future I2C engines
3656 //      [3-0] - I2C_LINE_MUX  = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C
3657 
3658 typedef struct _ATOM_I2C_ID_CONFIG
3659 {
3660 #if ATOM_BIG_ENDIAN
3661   UCHAR   bfHW_Capable:1;
3662   UCHAR   bfHW_EngineID:3;
3663   UCHAR   bfI2C_LineMux:4;
3664 #else
3665   UCHAR   bfI2C_LineMux:4;
3666   UCHAR   bfHW_EngineID:3;
3667   UCHAR   bfHW_Capable:1;
3668 #endif
3669 }ATOM_I2C_ID_CONFIG;
3670 
3671 typedef union _ATOM_I2C_ID_CONFIG_ACCESS
3672 {
3673   ATOM_I2C_ID_CONFIG sbfAccess;
3674   UCHAR              ucAccess;
3675 }ATOM_I2C_ID_CONFIG_ACCESS;
3676 
3677 
3678 /****************************************************************************/
3679 // Structure used in GPIO_I2C_InfoTable
3680 /****************************************************************************/
3681 typedef struct _ATOM_GPIO_I2C_ASSIGMENT
3682 {
3683   USHORT                    usClkMaskRegisterIndex;
3684   USHORT                    usClkEnRegisterIndex;
3685   USHORT                    usClkY_RegisterIndex;
3686   USHORT                    usClkA_RegisterIndex;
3687   USHORT                    usDataMaskRegisterIndex;
3688   USHORT                    usDataEnRegisterIndex;
3689   USHORT                    usDataY_RegisterIndex;
3690   USHORT                    usDataA_RegisterIndex;
3691   ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
3692   UCHAR                     ucClkMaskShift;
3693   UCHAR                     ucClkEnShift;
3694   UCHAR                     ucClkY_Shift;
3695   UCHAR                     ucClkA_Shift;
3696   UCHAR                     ucDataMaskShift;
3697   UCHAR                     ucDataEnShift;
3698   UCHAR                     ucDataY_Shift;
3699   UCHAR                     ucDataA_Shift;
3700   UCHAR                     ucReserved1;
3701   UCHAR                     ucReserved2;
3702 }ATOM_GPIO_I2C_ASSIGMENT;
3703 
3704 typedef struct _ATOM_GPIO_I2C_INFO
3705 {
3706   ATOM_COMMON_TABLE_HEADER   sHeader;
3707   ATOM_GPIO_I2C_ASSIGMENT   asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
3708 }ATOM_GPIO_I2C_INFO;
3709 
3710 /****************************************************************************/
3711 // Common Structure used in other structures
3712 /****************************************************************************/
3713 
3714 #ifndef _H2INC
3715 
3716 //Please don't add or expand this bitfield structure below, this one will retire soon.!
3717 typedef struct _ATOM_MODE_MISC_INFO
3718 {
3719 #if ATOM_BIG_ENDIAN
3720   USHORT Reserved:6;
3721   USHORT RGB888:1;
3722   USHORT DoubleClock:1;
3723   USHORT Interlace:1;
3724   USHORT CompositeSync:1;
3725   USHORT V_ReplicationBy2:1;
3726   USHORT H_ReplicationBy2:1;
3727   USHORT VerticalCutOff:1;
3728   USHORT VSyncPolarity:1;      //0=Active High, 1=Active Low
3729   USHORT HSyncPolarity:1;      //0=Active High, 1=Active Low
3730   USHORT HorizontalCutOff:1;
3731 #else
3732   USHORT HorizontalCutOff:1;
3733   USHORT HSyncPolarity:1;      //0=Active High, 1=Active Low
3734   USHORT VSyncPolarity:1;      //0=Active High, 1=Active Low
3735   USHORT VerticalCutOff:1;
3736   USHORT H_ReplicationBy2:1;
3737   USHORT V_ReplicationBy2:1;
3738   USHORT CompositeSync:1;
3739   USHORT Interlace:1;
3740   USHORT DoubleClock:1;
3741   USHORT RGB888:1;
3742   USHORT Reserved:6;
3743 #endif
3744 }ATOM_MODE_MISC_INFO;
3745 
3746 typedef union _ATOM_MODE_MISC_INFO_ACCESS
3747 {
3748   ATOM_MODE_MISC_INFO sbfAccess;
3749   USHORT              usAccess;
3750 }ATOM_MODE_MISC_INFO_ACCESS;
3751 
3752 #else
3753 
3754 typedef union _ATOM_MODE_MISC_INFO_ACCESS
3755 {
3756   USHORT              usAccess;
3757 }ATOM_MODE_MISC_INFO_ACCESS;
3758 
3759 #endif
3760 
3761 // usModeMiscInfo-
3762 #define ATOM_H_CUTOFF           0x01
3763 #define ATOM_HSYNC_POLARITY     0x02             //0=Active High, 1=Active Low
3764 #define ATOM_VSYNC_POLARITY     0x04             //0=Active High, 1=Active Low
3765 #define ATOM_V_CUTOFF           0x08
3766 #define ATOM_H_REPLICATIONBY2   0x10
3767 #define ATOM_V_REPLICATIONBY2   0x20
3768 #define ATOM_COMPOSITESYNC      0x40
3769 #define ATOM_INTERLACE          0x80
3770 #define ATOM_DOUBLE_CLOCK_MODE  0x100
3771 #define ATOM_RGB888_MODE        0x200
3772 
3773 //usRefreshRate-
3774 #define ATOM_REFRESH_43         43
3775 #define ATOM_REFRESH_47         47
3776 #define ATOM_REFRESH_56         56
3777 #define ATOM_REFRESH_60         60
3778 #define ATOM_REFRESH_65         65
3779 #define ATOM_REFRESH_70         70
3780 #define ATOM_REFRESH_72         72
3781 #define ATOM_REFRESH_75         75
3782 #define ATOM_REFRESH_85         85
3783 
3784 // ATOM_MODE_TIMING data are exactly the same as VESA timing data.
3785 // Translation from EDID to ATOM_MODE_TIMING, use the following formula.
3786 //
3787 //   VESA_HTOTAL         =   VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK
3788 //                  =   EDID_HA + EDID_HBL
3789 //   VESA_HDISP         =   VESA_ACTIVE   =   EDID_HA
3790 //   VESA_HSYNC_START   =   VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH
3791 //                  =   EDID_HA + EDID_HSO
3792 //   VESA_HSYNC_WIDTH   =   VESA_HSYNC_TIME   =   EDID_HSPW
3793 //   VESA_BORDER         =   EDID_BORDER
3794 
3795 
3796 /****************************************************************************/
3797 // Structure used in SetCRTC_UsingDTDTimingTable
3798 /****************************************************************************/
3799 typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS
3800 {
3801   USHORT  usH_Size;
3802   USHORT  usH_Blanking_Time;
3803   USHORT  usV_Size;
3804   USHORT  usV_Blanking_Time;
3805   USHORT  usH_SyncOffset;
3806   USHORT  usH_SyncWidth;
3807   USHORT  usV_SyncOffset;
3808   USHORT  usV_SyncWidth;
3809   ATOM_MODE_MISC_INFO_ACCESS  susModeMiscInfo;
3810   UCHAR   ucH_Border;         // From DFP EDID
3811   UCHAR   ucV_Border;
3812   UCHAR   ucCRTC;             // ATOM_CRTC1 or ATOM_CRTC2
3813   UCHAR   ucPadding[3];
3814 }SET_CRTC_USING_DTD_TIMING_PARAMETERS;
3815 
3816 /****************************************************************************/
3817 // Structure used in SetCRTC_TimingTable
3818 /****************************************************************************/
3819 typedef struct _SET_CRTC_TIMING_PARAMETERS
3820 {
3821   USHORT                      usH_Total;        // horizontal total
3822   USHORT                      usH_Disp;         // horizontal display
3823   USHORT                      usH_SyncStart;    // horozontal Sync start
3824   USHORT                      usH_SyncWidth;    // horizontal Sync width
3825   USHORT                      usV_Total;        // vertical total
3826   USHORT                      usV_Disp;         // vertical display
3827   USHORT                      usV_SyncStart;    // vertical Sync start
3828   USHORT                      usV_SyncWidth;    // vertical Sync width
3829   ATOM_MODE_MISC_INFO_ACCESS  susModeMiscInfo;
3830   UCHAR                       ucCRTC;           // ATOM_CRTC1 or ATOM_CRTC2
3831   UCHAR                       ucOverscanRight;  // right
3832   UCHAR                       ucOverscanLeft;   // left
3833   UCHAR                       ucOverscanBottom; // bottom
3834   UCHAR                       ucOverscanTop;    // top
3835   UCHAR                       ucReserved;
3836 }SET_CRTC_TIMING_PARAMETERS;
3837 #define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
3838 
3839 
3840 /****************************************************************************/
3841 // Structure used in StandardVESA_TimingTable
3842 //                   AnalogTV_InfoTable
3843 //                   ComponentVideoInfoTable
3844 /****************************************************************************/
3845 typedef struct _ATOM_MODE_TIMING
3846 {
3847   USHORT  usCRTC_H_Total;
3848   USHORT  usCRTC_H_Disp;
3849   USHORT  usCRTC_H_SyncStart;
3850   USHORT  usCRTC_H_SyncWidth;
3851   USHORT  usCRTC_V_Total;
3852   USHORT  usCRTC_V_Disp;
3853   USHORT  usCRTC_V_SyncStart;
3854   USHORT  usCRTC_V_SyncWidth;
3855   USHORT  usPixelClock;                                //in 10Khz unit
3856   ATOM_MODE_MISC_INFO_ACCESS  susModeMiscInfo;
3857   USHORT  usCRTC_OverscanRight;
3858   USHORT  usCRTC_OverscanLeft;
3859   USHORT  usCRTC_OverscanBottom;
3860   USHORT  usCRTC_OverscanTop;
3861   USHORT  usReserve;
3862   UCHAR   ucInternalModeNumber;
3863   UCHAR   ucRefreshRate;
3864 }ATOM_MODE_TIMING;
3865 
3866 typedef struct _ATOM_DTD_FORMAT
3867 {
3868   USHORT  usPixClk;
3869   USHORT  usHActive;
3870   USHORT  usHBlanking_Time;
3871   USHORT  usVActive;
3872   USHORT  usVBlanking_Time;
3873   USHORT  usHSyncOffset;
3874   USHORT  usHSyncWidth;
3875   USHORT  usVSyncOffset;
3876   USHORT  usVSyncWidth;
3877   USHORT  usImageHSize;
3878   USHORT  usImageVSize;
3879   UCHAR   ucHBorder;
3880   UCHAR   ucVBorder;
3881   ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
3882   UCHAR   ucInternalModeNumber;
3883   UCHAR   ucRefreshRate;
3884 }ATOM_DTD_FORMAT;
3885 
3886 /****************************************************************************/
3887 // Structure used in LVDS_InfoTable
3888 //  * Need a document to describe this table
3889 /****************************************************************************/
3890 #define SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
3891 #define SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
3892 #define SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
3893 #define SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
3894 #define SUPPORTED_LCD_REFRESHRATE_48Hz          0x0040
3895 
3896 //ucTableFormatRevision=1
3897 //ucTableContentRevision=1
3898 typedef struct _ATOM_LVDS_INFO
3899 {
3900   ATOM_COMMON_TABLE_HEADER sHeader;
3901   ATOM_DTD_FORMAT     sLCDTiming;
3902   USHORT              usModePatchTableOffset;
3903   USHORT              usSupportedRefreshRate;     //Refer to panel info table in ATOMBIOS extension Spec.
3904   USHORT              usOffDelayInMs;
3905   UCHAR               ucPowerSequenceDigOntoDEin10Ms;
3906   UCHAR               ucPowerSequenceDEtoBLOnin10Ms;
3907   UCHAR               ucLVDS_Misc;               // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
3908                                                  // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
3909                                                  // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
3910                                                  // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
3911   UCHAR               ucPanelDefaultRefreshRate;
3912   UCHAR               ucPanelIdentification;
3913   UCHAR               ucSS_Id;
3914 }ATOM_LVDS_INFO;
3915 
3916 //ucTableFormatRevision=1
3917 //ucTableContentRevision=2
3918 typedef struct _ATOM_LVDS_INFO_V12
3919 {
3920   ATOM_COMMON_TABLE_HEADER sHeader;
3921   ATOM_DTD_FORMAT     sLCDTiming;
3922   USHORT              usExtInfoTableOffset;
3923   USHORT              usSupportedRefreshRate;     //Refer to panel info table in ATOMBIOS extension Spec.
3924   USHORT              usOffDelayInMs;
3925   UCHAR               ucPowerSequenceDigOntoDEin10Ms;
3926   UCHAR               ucPowerSequenceDEtoBLOnin10Ms;
3927   UCHAR               ucLVDS_Misc;               // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
3928                                                  // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
3929                                                  // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
3930                                                  // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
3931   UCHAR               ucPanelDefaultRefreshRate;
3932   UCHAR               ucPanelIdentification;
3933   UCHAR               ucSS_Id;
3934   USHORT              usLCDVenderID;
3935   USHORT              usLCDProductID;
3936   UCHAR               ucLCDPanel_SpecialHandlingCap;
3937    UCHAR                        ucPanelInfoSize;               //  start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
3938   UCHAR               ucReserved[2];
3939 }ATOM_LVDS_INFO_V12;
3940 
3941 //Definitions for ucLCDPanel_SpecialHandlingCap:
3942 
3943 //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
3944 //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
3945 #define   LCDPANEL_CAP_READ_EDID                  0x1
3946 
3947 //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
3948 //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
3949 //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
3950 #define   LCDPANEL_CAP_DRR_SUPPORTED              0x2
3951 
3952 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
3953 #define   LCDPANEL_CAP_eDP                        0x4
3954 
3955 
3956 //Color Bit Depth definition in EDID V1.4 @BYTE 14h
3957 //Bit 6  5  4
3958                               //      0  0  0  -  Color bit depth is undefined
3959                               //      0  0  1  -  6 Bits per Primary Color
3960                               //      0  1  0  -  8 Bits per Primary Color
3961                               //      0  1  1  - 10 Bits per Primary Color
3962                               //      1  0  0  - 12 Bits per Primary Color
3963                               //      1  0  1  - 14 Bits per Primary Color
3964                               //      1  1  0  - 16 Bits per Primary Color
3965                               //      1  1  1  - Reserved
3966 
3967 #define PANEL_COLOR_BIT_DEPTH_MASK    0x70
3968 
3969 // Bit7:{=0:Random Dithering disabled;1 Random Dithering enabled}
3970 #define PANEL_RANDOM_DITHER   0x80
3971 #define PANEL_RANDOM_DITHER_MASK   0x80
3972 
3973 #define ATOM_LVDS_INFO_LAST  ATOM_LVDS_INFO_V12   // no need to change this
3974 
3975 
3976 typedef struct _ATOM_LCD_REFRESH_RATE_SUPPORT
3977 {
3978     UCHAR ucSupportedRefreshRate;
3979     UCHAR ucMinRefreshRateForDRR;
3980 }ATOM_LCD_REFRESH_RATE_SUPPORT;
3981 
3982 /****************************************************************************/
3983 // Structures used by LCD_InfoTable V1.3    Note: previous version was called ATOM_LVDS_INFO_V12
3984 // ASIC Families:  NI
3985 // ucTableFormatRevision=1
3986 // ucTableContentRevision=3
3987 /****************************************************************************/
3988 typedef struct _ATOM_LCD_INFO_V13
3989 {
3990   ATOM_COMMON_TABLE_HEADER sHeader;
3991   ATOM_DTD_FORMAT     sLCDTiming;
3992   USHORT              usExtInfoTableOffset;
3993   union
3994   {
3995     USHORT            usSupportedRefreshRate;
3996     ATOM_LCD_REFRESH_RATE_SUPPORT sRefreshRateSupport;
3997   };
3998   ULONG               ulReserved0;
3999   UCHAR               ucLCD_Misc;                // Reorganized in V13
4000                                                  // Bit0: {=0:single, =1:dual},
4001                                                  // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888}  // was {=0:666RGB, =1:888RGB},
4002                                                  // Bit3:2: {Grey level}
4003                                                  // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h)
4004                                                  // Bit7   Reserved.  was for ATOM_PANEL_MISC_API_ENABLED, still need it?
4005   UCHAR               ucPanelDefaultRefreshRate;
4006   UCHAR               ucPanelIdentification;
4007   UCHAR               ucSS_Id;
4008   USHORT              usLCDVenderID;
4009   USHORT              usLCDProductID;
4010   UCHAR               ucLCDPanel_SpecialHandlingCap;  // Reorganized in V13
4011                                                  // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own
4012                                                  // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED
4013                                                  // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1)
4014                                                  // Bit7-3: Reserved
4015   UCHAR               ucPanelInfoSize;                //  start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
4016   USHORT              usBacklightPWM;            //  Backlight PWM in Hz. New in _V13
4017 
4018   UCHAR               ucPowerSequenceDIGONtoDE_in4Ms;
4019   UCHAR               ucPowerSequenceDEtoVARY_BL_in4Ms;
4020   UCHAR               ucPowerSequenceVARY_BLtoDE_in4Ms;
4021   UCHAR               ucPowerSequenceDEtoDIGON_in4Ms;
4022 
4023   UCHAR               ucOffDelay_in4Ms;
4024   UCHAR               ucPowerSequenceVARY_BLtoBLON_in4Ms;
4025   UCHAR               ucPowerSequenceBLONtoVARY_BL_in4Ms;
4026   UCHAR               ucReserved1;
4027 
4028   UCHAR               ucDPCD_eDP_CONFIGURATION_CAP;     // dpcd 0dh
4029   UCHAR               ucDPCD_MAX_LINK_RATE;             // dpcd 01h
4030   UCHAR               ucDPCD_MAX_LANE_COUNT;            // dpcd 02h
4031   UCHAR               ucDPCD_MAX_DOWNSPREAD;            // dpcd 03h
4032 
4033   USHORT              usMaxPclkFreqInSingleLink;        // Max PixelClock frequency in single link mode.
4034   UCHAR               uceDPToLVDSRxId;
4035   UCHAR               ucLcdReservd;
4036   ULONG               ulReserved[2];
4037 }ATOM_LCD_INFO_V13;
4038 
4039 #define ATOM_LCD_INFO_LAST  ATOM_LCD_INFO_V13
4040 
4041 //Definitions for ucLCD_Misc
4042 #define ATOM_PANEL_MISC_V13_DUAL                   0x00000001
4043 #define ATOM_PANEL_MISC_V13_FPDI                   0x00000002
4044 #define ATOM_PANEL_MISC_V13_GREY_LEVEL             0x0000000C
4045 #define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT       2
4046 #define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK   0x70
4047 #define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR         0x10
4048 #define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR         0x20
4049 
4050 //Color Bit Depth definition in EDID V1.4 @BYTE 14h
4051 //Bit 6  5  4
4052                               //      0  0  0  -  Color bit depth is undefined
4053                               //      0  0  1  -  6 Bits per Primary Color
4054                               //      0  1  0  -  8 Bits per Primary Color
4055                               //      0  1  1  - 10 Bits per Primary Color
4056                               //      1  0  0  - 12 Bits per Primary Color
4057                               //      1  0  1  - 14 Bits per Primary Color
4058                               //      1  1  0  - 16 Bits per Primary Color
4059                               //      1  1  1  - Reserved
4060 
4061 //Definitions for ucLCDPanel_SpecialHandlingCap:
4062 
4063 //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
4064 //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
4065 #define   LCDPANEL_CAP_V13_READ_EDID              0x1        // = LCDPANEL_CAP_READ_EDID no change comparing to previous version
4066 
4067 //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
4068 //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
4069 //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
4070 #define   LCDPANEL_CAP_V13_DRR_SUPPORTED          0x2        // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version
4071 
4072 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
4073 #define   LCDPANEL_CAP_V13_eDP                    0x4        // = LCDPANEL_CAP_eDP no change comparing to previous version
4074 
4075 //uceDPToLVDSRxId
4076 #define eDP_TO_LVDS_RX_DISABLE                  0x00       // no eDP->LVDS translator chip
4077 #define eDP_TO_LVDS_COMMON_ID                   0x01       // common eDP->LVDS translator chip without AMD SW init
4078 #define eDP_TO_LVDS_RT_ID                       0x02       // RT tansaltor which require AMD SW init
4079 
4080 typedef struct  _ATOM_PATCH_RECORD_MODE
4081 {
4082   UCHAR     ucRecordType;
4083   USHORT    usHDisp;
4084   USHORT    usVDisp;
4085 }ATOM_PATCH_RECORD_MODE;
4086 
4087 typedef struct  _ATOM_LCD_RTS_RECORD
4088 {
4089   UCHAR     ucRecordType;
4090   UCHAR     ucRTSValue;
4091 }ATOM_LCD_RTS_RECORD;
4092 
4093 //!! If the record below exits, it shoud always be the first record for easy use in command table!!!
4094 // The record below is only used when LVDS_Info is present. From ATOM_LVDS_INFO_V12, use ucLCDPanel_SpecialHandlingCap instead.
4095 typedef struct  _ATOM_LCD_MODE_CONTROL_CAP
4096 {
4097   UCHAR     ucRecordType;
4098   USHORT    usLCDCap;
4099 }ATOM_LCD_MODE_CONTROL_CAP;
4100 
4101 #define LCD_MODE_CAP_BL_OFF                   1
4102 #define LCD_MODE_CAP_CRTC_OFF                 2
4103 #define LCD_MODE_CAP_PANEL_OFF                4
4104 
4105 
4106 typedef struct _ATOM_FAKE_EDID_PATCH_RECORD
4107 {
4108   UCHAR ucRecordType;
4109   UCHAR ucFakeEDIDLength;       // = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
4110   UCHAR ucFakeEDIDString[1];    // This actually has ucFakeEdidLength elements.
4111 } ATOM_FAKE_EDID_PATCH_RECORD;
4112 
4113 typedef struct  _ATOM_PANEL_RESOLUTION_PATCH_RECORD
4114 {
4115    UCHAR    ucRecordType;
4116    USHORT      usHSize;
4117    USHORT      usVSize;
4118 }ATOM_PANEL_RESOLUTION_PATCH_RECORD;
4119 
4120 #define LCD_MODE_PATCH_RECORD_MODE_TYPE       1
4121 #define LCD_RTS_RECORD_TYPE                   2
4122 #define LCD_CAP_RECORD_TYPE                   3
4123 #define LCD_FAKE_EDID_PATCH_RECORD_TYPE       4
4124 #define LCD_PANEL_RESOLUTION_RECORD_TYPE      5
4125 #define LCD_EDID_OFFSET_PATCH_RECORD_TYPE     6
4126 #define ATOM_RECORD_END_TYPE                  0xFF
4127 
4128 /****************************Spread Spectrum Info Table Definitions **********************/
4129 
4130 //ucTableFormatRevision=1
4131 //ucTableContentRevision=2
4132 typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT
4133 {
4134   USHORT              usSpreadSpectrumPercentage;
4135   UCHAR               ucSpreadSpectrumType;       //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Bit2=1: PCIE REFCLK SS =0 iternal PPLL SS  Others:TBD
4136   UCHAR               ucSS_Step;
4137   UCHAR               ucSS_Delay;
4138   UCHAR               ucSS_Id;
4139   UCHAR               ucRecommendedRef_Div;
4140   UCHAR               ucSS_Range;               //it was reserved for V11
4141 }ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
4142 
4143 #define ATOM_MAX_SS_ENTRY                      16
4144 #define ATOM_DP_SS_ID1                                     0x0f1         // SS ID for internal DP stream at 2.7Ghz. if ATOM_DP_SS_ID2 does not exist in SS_InfoTable, it is used for internal DP stream at 1.62Ghz as well.
4145 #define ATOM_DP_SS_ID2                                     0x0f2         // SS ID for internal DP stream at 1.62Ghz, if it exists in SS_InfoTable.
4146 #define ATOM_LVLINK_2700MHz_SS_ID              0x0f3      // SS ID for LV link translator chip at 2.7Ghz
4147 #define ATOM_LVLINK_1620MHz_SS_ID              0x0f4      // SS ID for LV link translator chip at 1.62Ghz
4148 
4149 
4150 
4151 #define ATOM_SS_DOWN_SPREAD_MODE_MASK          0x00000000
4152 #define ATOM_SS_DOWN_SPREAD_MODE               0x00000000
4153 #define ATOM_SS_CENTRE_SPREAD_MODE_MASK        0x00000001
4154 #define ATOM_SS_CENTRE_SPREAD_MODE             0x00000001
4155 #define ATOM_INTERNAL_SS_MASK                  0x00000000
4156 #define ATOM_EXTERNAL_SS_MASK                  0x00000002
4157 #define EXEC_SS_STEP_SIZE_SHIFT                2
4158 #define EXEC_SS_DELAY_SHIFT                    4
4159 #define ACTIVEDATA_TO_BLON_DELAY_SHIFT         4
4160 
4161 typedef struct _ATOM_SPREAD_SPECTRUM_INFO
4162 {
4163   ATOM_COMMON_TABLE_HEADER   sHeader;
4164   ATOM_SPREAD_SPECTRUM_ASSIGNMENT   asSS_Info[ATOM_MAX_SS_ENTRY];
4165 }ATOM_SPREAD_SPECTRUM_INFO;
4166 
4167 
4168 /****************************************************************************/
4169 // Structure used in AnalogTV_InfoTable (Top level)
4170 /****************************************************************************/
4171 //ucTVBootUpDefaultStd definiton:
4172 
4173 //ATOM_TV_NTSC                1
4174 //ATOM_TV_NTSCJ               2
4175 //ATOM_TV_PAL                 3
4176 //ATOM_TV_PALM                4
4177 //ATOM_TV_PALCN               5
4178 //ATOM_TV_PALN                6
4179 //ATOM_TV_PAL60               7
4180 //ATOM_TV_SECAM               8
4181 
4182 //ucTVSuppportedStd definition:
4183 #define NTSC_SUPPORT          0x1
4184 #define NTSCJ_SUPPORT         0x2
4185 
4186 #define PAL_SUPPORT           0x4
4187 #define PALM_SUPPORT          0x8
4188 #define PALCN_SUPPORT         0x10
4189 #define PALN_SUPPORT          0x20
4190 #define PAL60_SUPPORT         0x40
4191 #define SECAM_SUPPORT         0x80
4192 
4193 #define MAX_SUPPORTED_TV_TIMING    2
4194 
4195 typedef struct _ATOM_ANALOG_TV_INFO
4196 {
4197   ATOM_COMMON_TABLE_HEADER sHeader;
4198   UCHAR                    ucTV_SuppportedStandard;
4199   UCHAR                    ucTV_BootUpDefaultStandard;
4200   UCHAR                    ucExt_TV_ASIC_ID;
4201   UCHAR                    ucExt_TV_ASIC_SlaveAddr;
4202   ATOM_DTD_FORMAT          aModeTimings[MAX_SUPPORTED_TV_TIMING];
4203 }ATOM_ANALOG_TV_INFO;
4204 
4205 typedef struct _ATOM_DPCD_INFO
4206 {
4207   UCHAR   ucRevisionNumber;        //10h : Revision 1.0; 11h : Revision 1.1
4208   UCHAR   ucMaxLinkRate;           //06h : 1.62Gbps per lane; 0Ah = 2.7Gbps per lane
4209   UCHAR   ucMaxLane;               //Bits 4:0 = MAX_LANE_COUNT (1/2/4). Bit 7 = ENHANCED_FRAME_CAP
4210   UCHAR   ucMaxDownSpread;         //Bit0 = 0: No Down spread; Bit0 = 1: 0.5% (Subject to change according to DP spec)
4211 }ATOM_DPCD_INFO;
4212 
4213 #define ATOM_DPCD_MAX_LANE_MASK    0x1F
4214 
4215 /**************************************************************************/
4216 // VRAM usage and their defintions
4217 
4218 // One chunk of VRAM used by Bios are for HWICON surfaces,EDID data.
4219 // Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below.
4220 // All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned!
4221 // To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR
4222 // To Bios:  ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX
4223 
4224 // Moved VESA_MEMORY_IN_64K_BLOCK definition to "AtomConfig.h" so that it can be redefined in design (SKU).
4225 //#ifndef VESA_MEMORY_IN_64K_BLOCK
4226 //#define VESA_MEMORY_IN_64K_BLOCK        0x100       //256*64K=16Mb (Max. VESA memory is 16Mb!)
4227 //#endif
4228 
4229 #define ATOM_EDID_RAW_DATASIZE          256         //In Bytes
4230 #define ATOM_HWICON_SURFACE_SIZE        4096        //In Bytes
4231 #define ATOM_HWICON_INFOTABLE_SIZE      32
4232 #define MAX_DTD_MODE_IN_VRAM            6
4233 #define ATOM_DTD_MODE_SUPPORT_TBL_SIZE  (MAX_DTD_MODE_IN_VRAM*28)    //28= (SIZEOF ATOM_DTD_FORMAT)
4234 #define ATOM_STD_MODE_SUPPORT_TBL_SIZE  32*8                         //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
4235 //20 bytes for Encoder Type and DPCD in STD EDID area
4236 #define DFP_ENCODER_TYPE_OFFSET         (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20)
4237 #define ATOM_DP_DPCD_OFFSET             (DFP_ENCODER_TYPE_OFFSET + 4 )
4238 
4239 #define ATOM_HWICON1_SURFACE_ADDR       0
4240 #define ATOM_HWICON2_SURFACE_ADDR       (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
4241 #define ATOM_HWICON_INFOTABLE_ADDR      (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
4242 #define ATOM_CRT1_EDID_ADDR             (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
4243 #define ATOM_CRT1_DTD_MODE_TBL_ADDR     (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4244 #define ATOM_CRT1_STD_MODE_TBL_ADDR       (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4245 
4246 #define ATOM_LCD1_EDID_ADDR             (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4247 #define ATOM_LCD1_DTD_MODE_TBL_ADDR     (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4248 #define ATOM_LCD1_STD_MODE_TBL_ADDR      (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4249 
4250 #define ATOM_TV1_DTD_MODE_TBL_ADDR      (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4251 
4252 #define ATOM_DFP1_EDID_ADDR             (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4253 #define ATOM_DFP1_DTD_MODE_TBL_ADDR     (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4254 #define ATOM_DFP1_STD_MODE_TBL_ADDR       (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4255 
4256 #define ATOM_CRT2_EDID_ADDR             (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4257 #define ATOM_CRT2_DTD_MODE_TBL_ADDR     (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4258 #define ATOM_CRT2_STD_MODE_TBL_ADDR       (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4259 
4260 #define ATOM_LCD2_EDID_ADDR             (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4261 #define ATOM_LCD2_DTD_MODE_TBL_ADDR     (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4262 #define ATOM_LCD2_STD_MODE_TBL_ADDR      (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4263 
4264 #define ATOM_DFP6_EDID_ADDR             (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4265 #define ATOM_DFP6_DTD_MODE_TBL_ADDR     (ATOM_DFP6_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4266 #define ATOM_DFP6_STD_MODE_TBL_ADDR     (ATOM_DFP6_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4267 
4268 #define ATOM_DFP2_EDID_ADDR             (ATOM_DFP6_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4269 #define ATOM_DFP2_DTD_MODE_TBL_ADDR     (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4270 #define ATOM_DFP2_STD_MODE_TBL_ADDR     (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4271 
4272 #define ATOM_CV_EDID_ADDR               (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4273 #define ATOM_CV_DTD_MODE_TBL_ADDR       (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4274 #define ATOM_CV_STD_MODE_TBL_ADDR       (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4275 
4276 #define ATOM_DFP3_EDID_ADDR             (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4277 #define ATOM_DFP3_DTD_MODE_TBL_ADDR     (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4278 #define ATOM_DFP3_STD_MODE_TBL_ADDR     (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4279 
4280 #define ATOM_DFP4_EDID_ADDR             (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4281 #define ATOM_DFP4_DTD_MODE_TBL_ADDR     (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4282 #define ATOM_DFP4_STD_MODE_TBL_ADDR     (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4283 
4284 #define ATOM_DFP5_EDID_ADDR             (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4285 #define ATOM_DFP5_DTD_MODE_TBL_ADDR     (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
4286 #define ATOM_DFP5_STD_MODE_TBL_ADDR     (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
4287 
4288 #define ATOM_DP_TRAINING_TBL_ADDR       (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
4289 
4290 #define ATOM_STACK_STORAGE_START        (ATOM_DP_TRAINING_TBL_ADDR + 1024)
4291 #define ATOM_STACK_STORAGE_END          ATOM_STACK_STORAGE_START + 512
4292 
4293 //The size below is in Kb!
4294 #define ATOM_VRAM_RESERVE_SIZE         ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
4295 
4296 #define ATOM_VRAM_RESERVE_V2_SIZE      32
4297 
4298 #define   ATOM_VRAM_OPERATION_FLAGS_MASK         0xC0000000L
4299 #define ATOM_VRAM_OPERATION_FLAGS_SHIFT        30
4300 #define   ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION   0x1
4301 #define   ATOM_VRAM_BLOCK_NEEDS_RESERVATION      0x0
4302 #define   ATOM_VRAM_BLOCK_SRIOV_MSG_SHARE_RESERVATION 0x2
4303 
4304 /***********************************************************************************/
4305 // Structure used in VRAM_UsageByFirmwareTable
4306 // Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm
4307 //        at running time.
4308 // note2: From RV770, the memory is more than 32bit addressable, so we will change
4309 //        ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains
4310 //        exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware
4311 //        (in offset to start of memory address) is KB aligned instead of byte aligend.
4312 // Note3:
4313 /* If we change usReserved to "usFBUsedbyDrvInKB", then to VBIOS this usFBUsedbyDrvInKB is a predefined, unchanged
4314 constant across VGA or non VGA adapter,
4315 for CAIL, The size of FB access area is known, only thing missing is the Offset of FB Access area, so we can  have:
4316 
4317 If (ulStartAddrUsedByFirmware!=0)
4318 FBAccessAreaOffset= ulStartAddrUsedByFirmware - usFBUsedbyDrvInKB;
4319 Reserved area has been claimed by VBIOS including this FB access area; CAIL doesn't need to reserve any extra area for this purpose
4320 else   //Non VGA case
4321  if (FB_Size<=2Gb)
4322     FBAccessAreaOffset= FB_Size - usFBUsedbyDrvInKB;
4323  else
4324      FBAccessAreaOffset= Aper_Size - usFBUsedbyDrvInKB
4325 
4326 CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/
4327 
4328 /***********************************************************************************/
4329 #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO         1
4330 
4331 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
4332 {
4333   ULONG   ulStartAddrUsedByFirmware;
4334   USHORT  usFirmwareUseInKb;
4335   USHORT  usReserved;
4336 }ATOM_FIRMWARE_VRAM_RESERVE_INFO;
4337 
4338 typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE
4339 {
4340   ATOM_COMMON_TABLE_HEADER sHeader;
4341   ATOM_FIRMWARE_VRAM_RESERVE_INFO   asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
4342 }ATOM_VRAM_USAGE_BY_FIRMWARE;
4343 
4344 // change verion to 1.5, when allow driver to allocate the vram area for command table access.
4345 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5
4346 {
4347   ULONG   ulStartAddrUsedByFirmware;
4348   USHORT  usFirmwareUseInKb;
4349   USHORT  usFBUsedByDrvInKb;
4350 }ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5;
4351 
4352 typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5
4353 {
4354   ATOM_COMMON_TABLE_HEADER sHeader;
4355   ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5   asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
4356 }ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5;
4357 
4358 /****************************************************************************/
4359 // Structure used in GPIO_Pin_LUTTable
4360 /****************************************************************************/
4361 typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
4362 {
4363   USHORT                   usGpioPin_AIndex;
4364   UCHAR                    ucGpioPinBitShift;
4365   UCHAR                    ucGPIO_ID;
4366 }ATOM_GPIO_PIN_ASSIGNMENT;
4367 
4368 //ucGPIO_ID pre-define id for multiple usage
4369 // GPIO use to control PCIE_VDDC in certain SLT board
4370 #define PCIE_VDDC_CONTROL_GPIO_PINID        56
4371 
4372 //from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC switching feature is enable
4373 #define PP_AC_DC_SWITCH_GPIO_PINID          60
4374 //from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable
4375 #define VDDC_VRHOT_GPIO_PINID               61
4376 //if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled
4377 #define VDDC_PCC_GPIO_PINID                 62
4378 // Only used on certain SLT/PA board to allow utility to cut Efuse.
4379 #define EFUSE_CUT_ENABLE_GPIO_PINID         63
4380 // ucGPIO=DRAM_SELF_REFRESH_GPIO_PIND uses  for memory self refresh (ucGPIO=0, DRAM self-refresh; ucGPIO=
4381 #define DRAM_SELF_REFRESH_GPIO_PINID        64
4382 // Thermal interrupt output->system thermal chip GPIO pin
4383 #define THERMAL_INT_OUTPUT_GPIO_PINID       65
4384 
4385 
4386 typedef struct _ATOM_GPIO_PIN_LUT
4387 {
4388   ATOM_COMMON_TABLE_HEADER  sHeader;
4389   ATOM_GPIO_PIN_ASSIGNMENT   asGPIO_Pin[1];
4390 }ATOM_GPIO_PIN_LUT;
4391 
4392 /****************************************************************************/
4393 // Structure used in ComponentVideoInfoTable
4394 /****************************************************************************/
4395 #define GPIO_PIN_ACTIVE_HIGH          0x1
4396 #define MAX_SUPPORTED_CV_STANDARDS    5
4397 
4398 // definitions for ATOM_D_INFO.ucSettings
4399 #define ATOM_GPIO_SETTINGS_BITSHIFT_MASK  0x1F    // [4:0]
4400 #define ATOM_GPIO_SETTINGS_RESERVED_MASK  0x60    // [6:5] = must be zeroed out
4401 #define ATOM_GPIO_SETTINGS_ACTIVE_MASK    0x80    // [7]
4402 
4403 typedef struct _ATOM_GPIO_INFO
4404 {
4405   USHORT  usAOffset;
4406   UCHAR   ucSettings;
4407   UCHAR   ucReserved;
4408 }ATOM_GPIO_INFO;
4409 
4410 // definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector)
4411 #define ATOM_CV_RESTRICT_FORMAT_SELECTION           0x2
4412 
4413 // definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i
4414 #define ATOM_GPIO_DEFAULT_MODE_EN                   0x80 //[7];
4415 #define ATOM_GPIO_SETTING_PERMODE_MASK              0x7F //[6:0]
4416 
4417 // definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode
4418 //Line 3 out put 5V.
4419 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A       0x01     //represent gpio 3 state for 16:9
4420 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B       0x02     //represent gpio 4 state for 16:9
4421 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT   0x0
4422 
4423 //Line 3 out put 2.2V
4424 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04     //represent gpio 3 state for 4:3 Letter box
4425 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08     //represent gpio 4 state for 4:3 Letter box
4426 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
4427 
4428 //Line 3 out put 0V
4429 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A        0x10     //represent gpio 3 state for 4:3
4430 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B        0x20     //represent gpio 4 state for 4:3
4431 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT    0x4
4432 
4433 #define ATOM_CV_LINE3_ASPECTRATIO_MASK              0x3F     // bit [5:0]
4434 
4435 #define ATOM_CV_LINE3_ASPECTRATIO_EXIST             0x80     //bit 7
4436 
4437 //GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks.
4438 #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A   3   //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
4439 #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B   4   //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
4440 
4441 
4442 typedef struct _ATOM_COMPONENT_VIDEO_INFO
4443 {
4444   ATOM_COMMON_TABLE_HEADER sHeader;
4445   USHORT             usMask_PinRegisterIndex;
4446   USHORT             usEN_PinRegisterIndex;
4447   USHORT             usY_PinRegisterIndex;
4448   USHORT             usA_PinRegisterIndex;
4449   UCHAR              ucBitShift;
4450   UCHAR              ucPinActiveState;  //ucPinActiveState: Bit0=1 active high, =0 active low
4451   ATOM_DTD_FORMAT    sReserved;         // must be zeroed out
4452   UCHAR              ucMiscInfo;
4453   UCHAR              uc480i;
4454   UCHAR              uc480p;
4455   UCHAR              uc720p;
4456   UCHAR              uc1080i;
4457   UCHAR              ucLetterBoxMode;
4458   UCHAR              ucReserved[3];
4459   UCHAR              ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
4460   ATOM_GPIO_INFO     aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
4461   ATOM_DTD_FORMAT    aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
4462 }ATOM_COMPONENT_VIDEO_INFO;
4463 
4464 //ucTableFormatRevision=2
4465 //ucTableContentRevision=1
4466 typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21
4467 {
4468   ATOM_COMMON_TABLE_HEADER sHeader;
4469   UCHAR              ucMiscInfo;
4470   UCHAR              uc480i;
4471   UCHAR              uc480p;
4472   UCHAR              uc720p;
4473   UCHAR              uc1080i;
4474   UCHAR              ucReserved;
4475   UCHAR              ucLetterBoxMode;
4476   UCHAR              ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
4477   ATOM_GPIO_INFO     aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
4478   ATOM_DTD_FORMAT    aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
4479 }ATOM_COMPONENT_VIDEO_INFO_V21;
4480 
4481 #define ATOM_COMPONENT_VIDEO_INFO_LAST  ATOM_COMPONENT_VIDEO_INFO_V21
4482 
4483 /****************************************************************************/
4484 // Structure used in object_InfoTable
4485 /****************************************************************************/
4486 typedef struct _ATOM_OBJECT_HEADER
4487 {
4488   ATOM_COMMON_TABLE_HEADER   sHeader;
4489   USHORT                    usDeviceSupport;
4490   USHORT                    usConnectorObjectTableOffset;
4491   USHORT                    usRouterObjectTableOffset;
4492   USHORT                    usEncoderObjectTableOffset;
4493   USHORT                    usProtectionObjectTableOffset; //only available when Protection block is independent.
4494   USHORT                    usDisplayPathTableOffset;
4495 }ATOM_OBJECT_HEADER;
4496 
4497 typedef struct _ATOM_OBJECT_HEADER_V3
4498 {
4499   ATOM_COMMON_TABLE_HEADER   sHeader;
4500   USHORT                    usDeviceSupport;
4501   USHORT                    usConnectorObjectTableOffset;
4502   USHORT                    usRouterObjectTableOffset;
4503   USHORT                    usEncoderObjectTableOffset;
4504   USHORT                    usProtectionObjectTableOffset; //only available when Protection block is independent.
4505   USHORT                    usDisplayPathTableOffset;
4506   USHORT                    usMiscObjectTableOffset;
4507 }ATOM_OBJECT_HEADER_V3;
4508 
4509 
4510 typedef struct  _ATOM_DISPLAY_OBJECT_PATH
4511 {
4512   USHORT    usDeviceTag;                                   //supported device
4513   USHORT    usSize;                                        //the size of ATOM_DISPLAY_OBJECT_PATH
4514   USHORT    usConnObjectId;                                //Connector Object ID
4515   USHORT    usGPUObjectId;                                 //GPU ID
4516   USHORT    usGraphicObjIds[1];                            //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
4517 }ATOM_DISPLAY_OBJECT_PATH;
4518 
4519 typedef struct  _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH
4520 {
4521   USHORT    usDeviceTag;                                   //supported device
4522   USHORT    usSize;                                        //the size of ATOM_DISPLAY_OBJECT_PATH
4523   USHORT    usConnObjectId;                                //Connector Object ID
4524   USHORT    usGPUObjectId;                                 //GPU ID
4525   USHORT    usGraphicObjIds[2];                            //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder
4526 }ATOM_DISPLAY_EXTERNAL_OBJECT_PATH;
4527 
4528 typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
4529 {
4530   UCHAR                           ucNumOfDispPath;
4531   UCHAR                           ucVersion;
4532   UCHAR                           ucPadding[2];
4533   ATOM_DISPLAY_OBJECT_PATH        asDispPath[1];
4534 }ATOM_DISPLAY_OBJECT_PATH_TABLE;
4535 
4536 typedef struct _ATOM_OBJECT                                //each object has this structure
4537 {
4538   USHORT              usObjectID;
4539   USHORT              usSrcDstTableOffset;
4540   USHORT              usRecordOffset;                     //this pointing to a bunch of records defined below
4541   USHORT              usReserved;
4542 }ATOM_OBJECT;
4543 
4544 typedef struct _ATOM_OBJECT_TABLE                         //Above 4 object table offset pointing to a bunch of objects all have this structure
4545 {
4546   UCHAR               ucNumberOfObjects;
4547   UCHAR               ucPadding[3];
4548   ATOM_OBJECT         asObjects[1];
4549 }ATOM_OBJECT_TABLE;
4550 
4551 typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT         //usSrcDstTableOffset pointing to this structure
4552 {
4553   UCHAR               ucNumberOfSrc;
4554   USHORT              usSrcObjectID[1];
4555   UCHAR               ucNumberOfDst;
4556   USHORT              usDstObjectID[1];
4557 }ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
4558 
4559 
4560 //Two definitions below are for OPM on MXM module designs
4561 
4562 #define EXT_HPDPIN_LUTINDEX_0                   0
4563 #define EXT_HPDPIN_LUTINDEX_1                   1
4564 #define EXT_HPDPIN_LUTINDEX_2                   2
4565 #define EXT_HPDPIN_LUTINDEX_3                   3
4566 #define EXT_HPDPIN_LUTINDEX_4                   4
4567 #define EXT_HPDPIN_LUTINDEX_5                   5
4568 #define EXT_HPDPIN_LUTINDEX_6                   6
4569 #define EXT_HPDPIN_LUTINDEX_7                   7
4570 #define MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES   (EXT_HPDPIN_LUTINDEX_7+1)
4571 
4572 #define EXT_AUXDDC_LUTINDEX_0                   0
4573 #define EXT_AUXDDC_LUTINDEX_1                   1
4574 #define EXT_AUXDDC_LUTINDEX_2                   2
4575 #define EXT_AUXDDC_LUTINDEX_3                   3
4576 #define EXT_AUXDDC_LUTINDEX_4                   4
4577 #define EXT_AUXDDC_LUTINDEX_5                   5
4578 #define EXT_AUXDDC_LUTINDEX_6                   6
4579 #define EXT_AUXDDC_LUTINDEX_7                   7
4580 #define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES   (EXT_AUXDDC_LUTINDEX_7+1)
4581 
4582 //ucChannelMapping are defined as following
4583 //for DP connector, eDP, DP to VGA/LVDS
4584 //Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4585 //Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4586 //Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4587 //Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4588 typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING
4589 {
4590 #if ATOM_BIG_ENDIAN
4591   UCHAR ucDP_Lane3_Source:2;
4592   UCHAR ucDP_Lane2_Source:2;
4593   UCHAR ucDP_Lane1_Source:2;
4594   UCHAR ucDP_Lane0_Source:2;
4595 #else
4596   UCHAR ucDP_Lane0_Source:2;
4597   UCHAR ucDP_Lane1_Source:2;
4598   UCHAR ucDP_Lane2_Source:2;
4599   UCHAR ucDP_Lane3_Source:2;
4600 #endif
4601 }ATOM_DP_CONN_CHANNEL_MAPPING;
4602 
4603 //for DVI/HDMI, in dual link case, both links have to have same mapping.
4604 //Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4605 //Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4606 //Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4607 //Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4608 typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING
4609 {
4610 #if ATOM_BIG_ENDIAN
4611   UCHAR ucDVI_CLK_Source:2;
4612   UCHAR ucDVI_DATA0_Source:2;
4613   UCHAR ucDVI_DATA1_Source:2;
4614   UCHAR ucDVI_DATA2_Source:2;
4615 #else
4616   UCHAR ucDVI_DATA2_Source:2;
4617   UCHAR ucDVI_DATA1_Source:2;
4618   UCHAR ucDVI_DATA0_Source:2;
4619   UCHAR ucDVI_CLK_Source:2;
4620 #endif
4621 }ATOM_DVI_CONN_CHANNEL_MAPPING;
4622 
4623 typedef struct _EXT_DISPLAY_PATH
4624 {
4625   USHORT  usDeviceTag;                    //A bit vector to show what devices are supported
4626   USHORT  usDeviceACPIEnum;               //16bit device ACPI id.
4627   USHORT  usDeviceConnector;              //A physical connector for displays to plug in, using object connector definitions
4628   UCHAR   ucExtAUXDDCLutIndex;            //An index into external AUX/DDC channel LUT
4629   UCHAR   ucExtHPDPINLutIndex;            //An index into external HPD pin LUT
4630   USHORT  usExtEncoderObjId;              //external encoder object id
4631   union{
4632     UCHAR   ucChannelMapping;                  // if ucChannelMapping=0, using default one to one mapping
4633     ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
4634     ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
4635   };
4636   UCHAR   ucChPNInvert;                   // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
4637   USHORT  usCaps;
4638   USHORT  usReserved;
4639 }EXT_DISPLAY_PATH;
4640 
4641 #define NUMBER_OF_UCHAR_FOR_GUID          16
4642 #define MAX_NUMBER_OF_EXT_DISPLAY_PATH    7
4643 
4644 //usCaps
4645 #define  EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE               0x0001
4646 #define  EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN             0x0002
4647 #define  EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK              0x007C
4648 #define  EXT_DISPLAY_PATH_CAPS__HDMI20_PI3EQX1204          (0x01 << 2 )     //PI redriver chip
4649 #define  EXT_DISPLAY_PATH_CAPS__HDMI20_TISN65DP159RSBT     (0x02 << 2 )     //TI retimer chip
4650 #define  EXT_DISPLAY_PATH_CAPS__HDMI20_PARADE_PS175        (0x03 << 2 )     //Parade DP->HDMI recoverter chip
4651 
4652 
4653 
4654 
4655 typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
4656 {
4657   ATOM_COMMON_TABLE_HEADER sHeader;
4658   UCHAR                    ucGuid [NUMBER_OF_UCHAR_FOR_GUID];     // a GUID is a 16 byte long string
4659   EXT_DISPLAY_PATH         sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
4660   UCHAR                    ucChecksum;                            // a simple Checksum of the sum of whole structure equal to 0x0.
4661   UCHAR                    uc3DStereoPinId;                       // use for eDP panel
4662   UCHAR                    ucRemoteDisplayConfig;
4663   UCHAR                    uceDPToLVDSRxId;
4664   UCHAR                    ucFixDPVoltageSwing;                   // usCaps[1]=1, this indicate DP_LANE_SET value
4665   UCHAR                    Reserved[3];                           // for potential expansion
4666 }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
4667 
4668 //Related definitions, all records are different but they have a common header
4669 typedef struct _ATOM_COMMON_RECORD_HEADER
4670 {
4671   UCHAR               ucRecordType;                      //An emun to indicate the record type
4672   UCHAR               ucRecordSize;                      //The size of the whole record in byte
4673 }ATOM_COMMON_RECORD_HEADER;
4674 
4675 
4676 #define ATOM_I2C_RECORD_TYPE                           1
4677 #define ATOM_HPD_INT_RECORD_TYPE                       2
4678 #define ATOM_OUTPUT_PROTECTION_RECORD_TYPE             3
4679 #define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE          4
4680 #define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE       5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
4681 #define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE          6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
4682 #define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE      7
4683 #define ATOM_JTAG_RECORD_TYPE                          8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
4684 #define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE              9
4685 #define ATOM_ENCODER_DVO_CF_RECORD_TYPE                10
4686 #define ATOM_CONNECTOR_CF_RECORD_TYPE                  11
4687 #define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE        12
4688 #define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE   13
4689 #define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE        14
4690 #define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15
4691 #define ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE          16 //This is for the case when connectors are not known to object table
4692 #define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE          17 //This is for the case when connectors are not known to object table
4693 #define ATOM_OBJECT_LINK_RECORD_TYPE                   18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record
4694 #define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE          19
4695 #define ATOM_ENCODER_CAP_RECORD_TYPE                   20
4696 #define ATOM_BRACKET_LAYOUT_RECORD_TYPE                21
4697 #define ATOM_CONNECTOR_FORCED_TMDS_CAP_RECORD_TYPE     22
4698 
4699 //Must be updated when new record type is added,equal to that record definition!
4700 #define ATOM_MAX_OBJECT_RECORD_NUMBER                  ATOM_CONNECTOR_FORCED_TMDS_CAP_RECORD_TYPE
4701 
4702 typedef struct  _ATOM_I2C_RECORD
4703 {
4704   ATOM_COMMON_RECORD_HEADER   sheader;
4705   ATOM_I2C_ID_CONFIG          sucI2cId;
4706   UCHAR                       ucI2CAddr;              //The slave address, it's 0 when the record is attached to connector for DDC
4707 }ATOM_I2C_RECORD;
4708 
4709 typedef struct  _ATOM_HPD_INT_RECORD
4710 {
4711   ATOM_COMMON_RECORD_HEADER   sheader;
4712   UCHAR                       ucHPDIntGPIOID;         //Corresponding block in GPIO_PIN_INFO table gives the pin info
4713   UCHAR                       ucPlugged_PinState;
4714 }ATOM_HPD_INT_RECORD;
4715 
4716 
4717 typedef struct  _ATOM_OUTPUT_PROTECTION_RECORD
4718 {
4719   ATOM_COMMON_RECORD_HEADER   sheader;
4720   UCHAR                       ucProtectionFlag;
4721   UCHAR                       ucReserved;
4722 }ATOM_OUTPUT_PROTECTION_RECORD;
4723 
4724 typedef struct  _ATOM_CONNECTOR_DEVICE_TAG
4725 {
4726   ULONG                       ulACPIDeviceEnum;       //Reserved for now
4727   USHORT                      usDeviceID;             //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
4728   USHORT                      usPadding;
4729 }ATOM_CONNECTOR_DEVICE_TAG;
4730 
4731 typedef struct  _ATOM_CONNECTOR_DEVICE_TAG_RECORD
4732 {
4733   ATOM_COMMON_RECORD_HEADER   sheader;
4734   UCHAR                       ucNumberOfDevice;
4735   UCHAR                       ucReserved;
4736   ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[1];         //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
4737 }ATOM_CONNECTOR_DEVICE_TAG_RECORD;
4738 
4739 
4740 typedef struct  _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD
4741 {
4742   ATOM_COMMON_RECORD_HEADER   sheader;
4743   UCHAR                              ucConfigGPIOID;
4744   UCHAR                              ucConfigGPIOState;       //Set to 1 when it's active high to enable external flow in
4745   UCHAR                       ucFlowinGPIPID;
4746   UCHAR                       ucExtInGPIPID;
4747 }ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;
4748 
4749 typedef struct  _ATOM_ENCODER_FPGA_CONTROL_RECORD
4750 {
4751   ATOM_COMMON_RECORD_HEADER   sheader;
4752   UCHAR                       ucCTL1GPIO_ID;
4753   UCHAR                       ucCTL1GPIOState;        //Set to 1 when it's active high
4754   UCHAR                       ucCTL2GPIO_ID;
4755   UCHAR                       ucCTL2GPIOState;        //Set to 1 when it's active high
4756   UCHAR                       ucCTL3GPIO_ID;
4757   UCHAR                       ucCTL3GPIOState;        //Set to 1 when it's active high
4758   UCHAR                       ucCTLFPGA_IN_ID;
4759   UCHAR                       ucPadding[3];
4760 }ATOM_ENCODER_FPGA_CONTROL_RECORD;
4761 
4762 typedef struct  _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD
4763 {
4764   ATOM_COMMON_RECORD_HEADER   sheader;
4765   UCHAR                       ucGPIOID;               //Corresponding block in GPIO_PIN_INFO table gives the pin info
4766   UCHAR                       ucTVActiveState;        //Indicating when the pin==0 or 1 when TV is connected
4767 }ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;
4768 
4769 typedef struct  _ATOM_JTAG_RECORD
4770 {
4771   ATOM_COMMON_RECORD_HEADER   sheader;
4772   UCHAR                       ucTMSGPIO_ID;
4773   UCHAR                       ucTMSGPIOState;         //Set to 1 when it's active high
4774   UCHAR                       ucTCKGPIO_ID;
4775   UCHAR                       ucTCKGPIOState;         //Set to 1 when it's active high
4776   UCHAR                       ucTDOGPIO_ID;
4777   UCHAR                       ucTDOGPIOState;         //Set to 1 when it's active high
4778   UCHAR                       ucTDIGPIO_ID;
4779   UCHAR                       ucTDIGPIOState;         //Set to 1 when it's active high
4780   UCHAR                       ucPadding[2];
4781 }ATOM_JTAG_RECORD;
4782 
4783 
4784 //The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
4785 typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR
4786 {
4787   UCHAR                       ucGPIOID;               // GPIO_ID, find the corresponding ID in GPIO_LUT table
4788   UCHAR                       ucGPIO_PinState;        // Pin state showing how to set-up the pin
4789 }ATOM_GPIO_PIN_CONTROL_PAIR;
4790 
4791 typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
4792 {
4793   ATOM_COMMON_RECORD_HEADER   sheader;
4794   UCHAR                       ucFlags;                // Future expnadibility
4795   UCHAR                       ucNumberOfPins;         // Number of GPIO pins used to control the object
4796   ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[1];              // the real gpio pin pair determined by number of pins ucNumberOfPins
4797 }ATOM_OBJECT_GPIO_CNTL_RECORD;
4798 
4799 //Definitions for GPIO pin state
4800 #define GPIO_PIN_TYPE_INPUT             0x00
4801 #define GPIO_PIN_TYPE_OUTPUT            0x10
4802 #define GPIO_PIN_TYPE_HW_CONTROL        0x20
4803 
4804 //For GPIO_PIN_TYPE_OUTPUT the following is defined
4805 #define GPIO_PIN_OUTPUT_STATE_MASK      0x01
4806 #define GPIO_PIN_OUTPUT_STATE_SHIFT     0
4807 #define GPIO_PIN_STATE_ACTIVE_LOW       0x0
4808 #define GPIO_PIN_STATE_ACTIVE_HIGH      0x1
4809 
4810 // Indexes to GPIO array in GLSync record
4811 // GLSync record is for Frame Lock/Gen Lock feature.
4812 #define ATOM_GPIO_INDEX_GLSYNC_REFCLK    0
4813 #define ATOM_GPIO_INDEX_GLSYNC_HSYNC     1
4814 #define ATOM_GPIO_INDEX_GLSYNC_VSYNC     2
4815 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ  3
4816 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT  4
4817 #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5
4818 #define ATOM_GPIO_INDEX_GLSYNC_V_RESET   6
4819 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7
4820 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL  8
4821 #define ATOM_GPIO_INDEX_GLSYNC_MAX       9
4822 
4823 typedef struct  _ATOM_ENCODER_DVO_CF_RECORD
4824 {
4825   ATOM_COMMON_RECORD_HEADER   sheader;
4826   ULONG                       ulStrengthControl;      // DVOA strength control for CF
4827   UCHAR                       ucPadding[2];
4828 }ATOM_ENCODER_DVO_CF_RECORD;
4829 
4830 // Bit maps for ATOM_ENCODER_CAP_RECORD.usEncoderCap
4831 #define ATOM_ENCODER_CAP_RECORD_HBR2                  0x01         // DP1.2 HBR2 is supported by HW encoder, it is retired in NI. the real meaning from SI is MST_EN
4832 #define ATOM_ENCODER_CAP_RECORD_MST_EN                0x01         // from SI, this bit means DP MST is enable or not.
4833 #define ATOM_ENCODER_CAP_RECORD_HBR2_EN               0x02         // DP1.2 HBR2 setting is qualified and HBR2 can be enabled
4834 #define ATOM_ENCODER_CAP_RECORD_HDMI6Gbps_EN          0x04         // HDMI2.0 6Gbps enable or not.
4835 #define ATOM_ENCODER_CAP_RECORD_HBR3_EN               0x08         // DP1.3 HBR3 is supported by board.
4836 
4837 typedef struct  _ATOM_ENCODER_CAP_RECORD
4838 {
4839   ATOM_COMMON_RECORD_HEADER   sheader;
4840   union {
4841     USHORT                    usEncoderCap;
4842     struct {
4843 #if ATOM_BIG_ENDIAN
4844       USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
4845       USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
4846       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability.
4847 #else
4848       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability.
4849       USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
4850       USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
4851 #endif
4852     };
4853   };
4854 }ATOM_ENCODER_CAP_RECORD;
4855 
4856 // Used after SI
4857 typedef struct  _ATOM_ENCODER_CAP_RECORD_V2
4858 {
4859   ATOM_COMMON_RECORD_HEADER   sheader;
4860   union {
4861     USHORT                    usEncoderCap;
4862     struct {
4863 #if ATOM_BIG_ENDIAN
4864       USHORT                  usReserved:12;        // Bit4-15 may be defined for other capability in future
4865       USHORT                  usHBR3En:1;           // bit3 is for DP1.3 HBR3 enable
4866       USHORT                  usHDMI6GEn:1;         // Bit2 is for HDMI6Gbps enable, this bit is used starting from CZ( APU) Ellemere (dGPU)
4867       USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
4868       USHORT                  usMSTEn:1;            // Bit0 is for DP1.2 MST enable
4869 #else
4870       USHORT                  usMSTEn:1;            // Bit0 is for DP1.2 MST enable
4871       USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
4872       USHORT                  usHDMI6GEn:1;         // Bit2 is for HDMI6Gbps enable, this bit is used starting from CZ( APU) Ellemere (dGPU)
4873       USHORT                  usHBR3En:1;           // bit3 is for DP1.3 HBR3 enable
4874       USHORT                  usReserved:12;        // Bit4-15 may be defined for other capability in future
4875 #endif
4876     };
4877   };
4878 }ATOM_ENCODER_CAP_RECORD_V2;
4879 
4880 
4881 // value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle
4882 #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA   1
4883 #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB   2
4884 
4885 typedef struct  _ATOM_CONNECTOR_CF_RECORD
4886 {
4887   ATOM_COMMON_RECORD_HEADER   sheader;
4888   USHORT                      usMaxPixClk;
4889   UCHAR                       ucFlowCntlGpioId;
4890   UCHAR                       ucSwapCntlGpioId;
4891   UCHAR                       ucConnectedDvoBundle;
4892   UCHAR                       ucPadding;
4893 }ATOM_CONNECTOR_CF_RECORD;
4894 
4895 typedef struct  _ATOM_CONNECTOR_HARDCODE_DTD_RECORD
4896 {
4897   ATOM_COMMON_RECORD_HEADER   sheader;
4898    ATOM_DTD_FORMAT                     asTiming;
4899 }ATOM_CONNECTOR_HARDCODE_DTD_RECORD;
4900 
4901 typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD
4902 {
4903   ATOM_COMMON_RECORD_HEADER   sheader;                //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE
4904   UCHAR                       ucSubConnectorType;     //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A
4905   UCHAR                       ucReserved;
4906 }ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;
4907 
4908 
4909 typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD
4910 {
4911    ATOM_COMMON_RECORD_HEADER   sheader;
4912    UCHAR                                    ucMuxType;                     //decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state
4913    UCHAR                                    ucMuxControlPin;
4914    UCHAR                                    ucMuxState[2];               //for alligment purpose
4915 }ATOM_ROUTER_DDC_PATH_SELECT_RECORD;
4916 
4917 typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD
4918 {
4919    ATOM_COMMON_RECORD_HEADER   sheader;
4920    UCHAR                                    ucMuxType;
4921    UCHAR                                    ucMuxControlPin;
4922    UCHAR                                    ucMuxState[2];               //for alligment purpose
4923 }ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;
4924 
4925 // define ucMuxType
4926 #define ATOM_ROUTER_MUX_PIN_STATE_MASK                        0x0f
4927 #define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT      0x01
4928 
4929 typedef struct _ATOM_CONNECTOR_HPDPIN_LUT_RECORD     //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE
4930 {
4931   ATOM_COMMON_RECORD_HEADER   sheader;
4932   UCHAR                       ucHPDPINMap[MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES];  //An fixed size array which maps external pins to internal GPIO_PIN_INFO table
4933 }ATOM_CONNECTOR_HPDPIN_LUT_RECORD;
4934 
4935 typedef struct _ATOM_CONNECTOR_AUXDDC_LUT_RECORD  //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE
4936 {
4937   ATOM_COMMON_RECORD_HEADER   sheader;
4938   ATOM_I2C_ID_CONFIG          ucAUXDDCMap[MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES];  //An fixed size array which maps external pins to internal DDC ID
4939 }ATOM_CONNECTOR_AUXDDC_LUT_RECORD;
4940 
4941 typedef struct _ATOM_OBJECT_LINK_RECORD
4942 {
4943   ATOM_COMMON_RECORD_HEADER   sheader;
4944   USHORT                      usObjectID;         //could be connector, encorder or other object in object.h
4945 }ATOM_OBJECT_LINK_RECORD;
4946 
4947 typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD
4948 {
4949   ATOM_COMMON_RECORD_HEADER   sheader;
4950   USHORT                      usReserved;
4951 }ATOM_CONNECTOR_REMOTE_CAP_RECORD;
4952 
4953 
4954 typedef struct  _ATOM_CONNECTOR_FORCED_TMDS_CAP_RECORD
4955 {
4956   ATOM_COMMON_RECORD_HEADER   sheader;
4957   // override TMDS capability on this connector when it operate in TMDS mode.  usMaxTmdsClkRate = max TMDS Clock in Mhz/2.5
4958   UCHAR                       ucMaxTmdsClkRateIn2_5Mhz;
4959   UCHAR                       ucReserved;
4960 } ATOM_CONNECTOR_FORCED_TMDS_CAP_RECORD;
4961 
4962 
4963 typedef struct  _ATOM_CONNECTOR_LAYOUT_INFO
4964 {
4965    USHORT usConnectorObjectId;
4966    UCHAR  ucConnectorType;
4967    UCHAR  ucPosition;
4968 }ATOM_CONNECTOR_LAYOUT_INFO;
4969 
4970 // define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size
4971 #define CONNECTOR_TYPE_DVI_D                 1
4972 #define CONNECTOR_TYPE_DVI_I                 2
4973 #define CONNECTOR_TYPE_VGA                   3
4974 #define CONNECTOR_TYPE_HDMI                  4
4975 #define CONNECTOR_TYPE_DISPLAY_PORT          5
4976 #define CONNECTOR_TYPE_MINI_DISPLAY_PORT     6
4977 
4978 typedef struct  _ATOM_BRACKET_LAYOUT_RECORD
4979 {
4980   ATOM_COMMON_RECORD_HEADER   sheader;
4981   UCHAR                       ucLength;
4982   UCHAR                       ucWidth;
4983   UCHAR                       ucConnNum;
4984   UCHAR                       ucReserved;
4985   ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[1];
4986 }ATOM_BRACKET_LAYOUT_RECORD;
4987 
4988 
4989 /****************************************************************************/
4990 // Structure used in XXXX
4991 /****************************************************************************/
4992 typedef struct  _ATOM_VOLTAGE_INFO_HEADER
4993 {
4994    USHORT   usVDDCBaseLevel;                //In number of 50mv unit
4995    USHORT   usReserved;                     //For possible extension table offset
4996    UCHAR    ucNumOfVoltageEntries;
4997    UCHAR    ucBytesPerVoltageEntry;
4998    UCHAR    ucVoltageStep;                  //Indicating in how many mv increament is one step, 0.5mv unit
4999    UCHAR    ucDefaultVoltageEntry;
5000    UCHAR    ucVoltageControlI2cLine;
5001    UCHAR    ucVoltageControlAddress;
5002    UCHAR    ucVoltageControlOffset;
5003 }ATOM_VOLTAGE_INFO_HEADER;
5004 
5005 typedef struct  _ATOM_VOLTAGE_INFO
5006 {
5007    ATOM_COMMON_TABLE_HEADER   sHeader;
5008    ATOM_VOLTAGE_INFO_HEADER viHeader;
5009    UCHAR    ucVoltageEntries[64];            //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry
5010 }ATOM_VOLTAGE_INFO;
5011 
5012 
5013 typedef struct  _ATOM_VOLTAGE_FORMULA
5014 {
5015    USHORT   usVoltageBaseLevel;             // In number of 1mv unit
5016    USHORT   usVoltageStep;                  // Indicating in how many mv increament is one step, 1mv unit
5017    UCHAR    ucNumOfVoltageEntries;          // Number of Voltage Entry, which indicate max Voltage
5018    UCHAR    ucFlag;                         // bit0=0 :step is 1mv =1 0.5mv
5019    UCHAR    ucBaseVID;                      // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep
5020    UCHAR    ucReserved;
5021    UCHAR    ucVIDAdjustEntries[32];         // 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries
5022 }ATOM_VOLTAGE_FORMULA;
5023 
5024 typedef struct  _VOLTAGE_LUT_ENTRY
5025 {
5026     USHORT     usVoltageCode;               // The Voltage ID, either GPIO or I2C code
5027     USHORT     usVoltageValue;              // The corresponding Voltage Value, in mV
5028 }VOLTAGE_LUT_ENTRY;
5029 
5030 typedef struct  _ATOM_VOLTAGE_FORMULA_V2
5031 {
5032     UCHAR      ucNumOfVoltageEntries;               // Number of Voltage Entry, which indicate max Voltage
5033     UCHAR      ucReserved[3];
5034     VOLTAGE_LUT_ENTRY asVIDAdjustEntries[32];// 32 is for allocation, the actual number of entries is in ucNumOfVoltageEntries
5035 }ATOM_VOLTAGE_FORMULA_V2;
5036 
5037 typedef struct _ATOM_VOLTAGE_CONTROL
5038 {
5039   UCHAR    ucVoltageControlId;                     //Indicate it is controlled by I2C or GPIO or HW state machine
5040   UCHAR    ucVoltageControlI2cLine;
5041   UCHAR    ucVoltageControlAddress;
5042   UCHAR    ucVoltageControlOffset;
5043   USHORT   usGpioPin_AIndex;                       //GPIO_PAD register index
5044   UCHAR    ucGpioPinBitShift[9];                   //at most 8 pin support 255 VIDs, termintate with 0xff
5045   UCHAR    ucReserved;
5046 }ATOM_VOLTAGE_CONTROL;
5047 
5048 // Define ucVoltageControlId
5049 #define VOLTAGE_CONTROLLED_BY_HW              0x00
5050 #define VOLTAGE_CONTROLLED_BY_I2C_MASK        0x7F
5051 #define VOLTAGE_CONTROLLED_BY_GPIO            0x80
5052 #define VOLTAGE_CONTROL_ID_LM64               0x01                           //I2C control, used for R5xx Core Voltage
5053 #define VOLTAGE_CONTROL_ID_DAC                0x02                           //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI
5054 #define VOLTAGE_CONTROL_ID_VT116xM            0x03                           //I2C control, used for R6xx Core Voltage
5055 #define VOLTAGE_CONTROL_ID_DS4402             0x04
5056 #define VOLTAGE_CONTROL_ID_UP6266             0x05
5057 #define VOLTAGE_CONTROL_ID_SCORPIO            0x06
5058 #define VOLTAGE_CONTROL_ID_VT1556M            0x07
5059 #define VOLTAGE_CONTROL_ID_CHL822x            0x08
5060 #define VOLTAGE_CONTROL_ID_VT1586M            0x09
5061 #define VOLTAGE_CONTROL_ID_UP1637             0x0A
5062 #define VOLTAGE_CONTROL_ID_CHL8214            0x0B
5063 #define VOLTAGE_CONTROL_ID_UP1801             0x0C
5064 #define VOLTAGE_CONTROL_ID_ST6788A            0x0D
5065 #define VOLTAGE_CONTROL_ID_CHLIR3564SVI2      0x0E
5066 #define VOLTAGE_CONTROL_ID_AD527x             0x0F
5067 #define VOLTAGE_CONTROL_ID_NCP81022           0x10
5068 #define VOLTAGE_CONTROL_ID_LTC2635            0x11
5069 #define VOLTAGE_CONTROL_ID_NCP4208            0x12
5070 #define VOLTAGE_CONTROL_ID_IR35xx             0x13
5071 #define VOLTAGE_CONTROL_ID_RT9403             0x14
5072 
5073 #define VOLTAGE_CONTROL_ID_GENERIC_I2C        0x40
5074 
5075 typedef struct  _ATOM_VOLTAGE_OBJECT
5076 {
5077    UCHAR      ucVoltageType;                           //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
5078    UCHAR      ucSize;                                       //Size of Object
5079    ATOM_VOLTAGE_CONTROL         asControl;         //describ how to control
5080    ATOM_VOLTAGE_FORMULA         asFormula;         //Indicate How to convert real Voltage to VID
5081 }ATOM_VOLTAGE_OBJECT;
5082 
5083 typedef struct  _ATOM_VOLTAGE_OBJECT_V2
5084 {
5085     UCHAR ucVoltageType;                      //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
5086     UCHAR ucSize;                             //Size of Object
5087     ATOM_VOLTAGE_CONTROL    asControl;        //describ how to control
5088     ATOM_VOLTAGE_FORMULA_V2 asFormula;        //Indicate How to convert real Voltage to VID
5089 }ATOM_VOLTAGE_OBJECT_V2;
5090 
5091 typedef struct  _ATOM_VOLTAGE_OBJECT_INFO
5092 {
5093    ATOM_COMMON_TABLE_HEADER   sHeader;
5094    ATOM_VOLTAGE_OBJECT        asVoltageObj[3];   //Info for Voltage control
5095 }ATOM_VOLTAGE_OBJECT_INFO;
5096 
5097 typedef struct  _ATOM_VOLTAGE_OBJECT_INFO_V2
5098 {
5099    ATOM_COMMON_TABLE_HEADER   sHeader;
5100     ATOM_VOLTAGE_OBJECT_V2    asVoltageObj[3];   //Info for Voltage control
5101 }ATOM_VOLTAGE_OBJECT_INFO_V2;
5102 
5103 typedef struct  _ATOM_LEAKID_VOLTAGE
5104 {
5105    UCHAR    ucLeakageId;
5106    UCHAR    ucReserved;
5107    USHORT   usVoltage;
5108 }ATOM_LEAKID_VOLTAGE;
5109 
5110 typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{
5111    UCHAR    ucVoltageType;                            //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
5112    UCHAR    ucVoltageMode;                            //Indicate voltage control mode: Init/Set/Leakage/Set phase
5113    USHORT   usSize;                                   //Size of Object
5114 }ATOM_VOLTAGE_OBJECT_HEADER_V3;
5115 
5116 // ATOM_VOLTAGE_OBJECT_HEADER_V3.ucVoltageMode
5117 #define VOLTAGE_OBJ_GPIO_LUT                 0        //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
5118 #define VOLTAGE_OBJ_VR_I2C_INIT_SEQ          3        //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3
5119 #define VOLTAGE_OBJ_PHASE_LUT                4        //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
5120 #define VOLTAGE_OBJ_SVID2                    7        //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3
5121 #define VOLTAGE_OBJ_EVV                      8
5122 #define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT     0x10     //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
5123 #define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT   0x11     //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
5124 #define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT  0x12     //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
5125 
5126 typedef struct  _VOLTAGE_LUT_ENTRY_V2
5127 {
5128   ULONG   ulVoltageId;                       // The Voltage ID which is used to program GPIO register
5129   USHORT  usVoltageValue;                    // The corresponding Voltage Value, in mV
5130 }VOLTAGE_LUT_ENTRY_V2;
5131 
5132 typedef struct  _LEAKAGE_VOLTAGE_LUT_ENTRY_V2
5133 {
5134   USHORT  usVoltageLevel;                    // The Voltage ID which is used to program GPIO register
5135   USHORT  usVoltageId;
5136   USHORT  usLeakageId;                       // The corresponding Voltage Value, in mV
5137 }LEAKAGE_VOLTAGE_LUT_ENTRY_V2;
5138 
5139 
5140 typedef struct  _ATOM_I2C_VOLTAGE_OBJECT_V3
5141 {
5142    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ
5143    UCHAR  ucVoltageRegulatorId;              //Indicate Voltage Regulator Id
5144    UCHAR  ucVoltageControlI2cLine;
5145    UCHAR  ucVoltageControlAddress;
5146    UCHAR  ucVoltageControlOffset;
5147    UCHAR  ucVoltageControlFlag;              // Bit0: 0 - One byte data; 1 - Two byte data
5148    UCHAR  ulReserved[3];
5149    VOLTAGE_LUT_ENTRY asVolI2cLut[1];         // end with 0xff
5150 }ATOM_I2C_VOLTAGE_OBJECT_V3;
5151 
5152 // ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag
5153 #define VOLTAGE_DATA_ONE_BYTE                0
5154 #define VOLTAGE_DATA_TWO_BYTE                1
5155 
5156 typedef struct  _ATOM_GPIO_VOLTAGE_OBJECT_V3
5157 {
5158    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT
5159    UCHAR  ucVoltageGpioCntlId;               // default is 0 which indicate control through CG VID mode
5160    UCHAR  ucGpioEntryNum;                    // indiate the entry numbers of Votlage/Gpio value Look up table
5161    UCHAR  ucPhaseDelay;                      // phase delay in unit of micro second
5162    UCHAR  ucReserved;
5163    ULONG  ulGpioMaskVal;                     // GPIO Mask value
5164    VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];
5165 }ATOM_GPIO_VOLTAGE_OBJECT_V3;
5166 
5167 typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
5168 {
5169    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = 0x10/0x11/0x12
5170    UCHAR    ucLeakageCntlId;                 // default is 0
5171    UCHAR    ucLeakageEntryNum;               // indicate the entry number of LeakageId/Voltage Lut table
5172    UCHAR    ucReserved[2];
5173    ULONG    ulMaxVoltageLevel;
5174    LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
5175 }ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
5176 
5177 
5178 typedef struct  _ATOM_SVID2_VOLTAGE_OBJECT_V3
5179 {
5180    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = VOLTAGE_OBJ_SVID2
5181 // 14:7 - PSI0_VID
5182 // 6 - PSI0_EN
5183 // 5 - PSI1
5184 // 4:2 - load line slope trim.
5185 // 1:0 - offset trim,
5186    USHORT   usLoadLine_PSI;
5187 // GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31
5188    UCHAR    ucSVDGpioId;     //0~31 indicate GPIO0~31
5189    UCHAR    ucSVCGpioId;     //0~31 indicate GPIO0~31
5190    ULONG    ulReserved;
5191 }ATOM_SVID2_VOLTAGE_OBJECT_V3;
5192 
5193 
5194 
5195 typedef struct  _ATOM_MERGED_VOLTAGE_OBJECT_V3
5196 {
5197    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = VOLTAGE_OBJ_MERGED_POWER
5198    UCHAR    ucMergedVType;                   // VDDC/VDCCI/....
5199    UCHAR    ucReserved[3];
5200 }ATOM_MERGED_VOLTAGE_OBJECT_V3;
5201 
5202 
5203 typedef struct _ATOM_EVV_DPM_INFO
5204 {
5205   ULONG ulDPMSclk;            // DPM state SCLK
5206   USHORT usVAdjOffset;        // Adjust Voltage offset in unit of mv
5207   UCHAR ucDPMTblVIndex;       // Voltage Index in SMC_DPM_Table structure VddcTable/VddGfxTable
5208   UCHAR ucDPMState;           // DPMState0~7
5209 } ATOM_EVV_DPM_INFO;
5210 
5211 // ucVoltageMode = VOLTAGE_OBJ_EVV
5212 typedef struct  _ATOM_EVV_VOLTAGE_OBJECT_V3
5213 {
5214   ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = VOLTAGE_OBJ_SVID2
5215   ATOM_EVV_DPM_INFO asEvvDpmList[8];
5216 }ATOM_EVV_VOLTAGE_OBJECT_V3;
5217 
5218 
5219 typedef union _ATOM_VOLTAGE_OBJECT_V3{
5220   ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj;
5221   ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj;
5222   ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj;
5223   ATOM_SVID2_VOLTAGE_OBJECT_V3 asSVID2Obj;
5224   ATOM_EVV_VOLTAGE_OBJECT_V3 asEvvObj;
5225 }ATOM_VOLTAGE_OBJECT_V3;
5226 
5227 typedef struct  _ATOM_VOLTAGE_OBJECT_INFO_V3_1
5228 {
5229   ATOM_COMMON_TABLE_HEADER   sHeader;
5230   ATOM_VOLTAGE_OBJECT_V3     asVoltageObj[3];   //Info for Voltage control
5231 }ATOM_VOLTAGE_OBJECT_INFO_V3_1;
5232 
5233 
5234 typedef struct  _ATOM_ASIC_PROFILE_VOLTAGE
5235 {
5236    UCHAR    ucProfileId;
5237    UCHAR    ucReserved;
5238    USHORT   usSize;
5239    USHORT   usEfuseSpareStartAddr;
5240    USHORT   usFuseIndex[8];                                    //from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id,
5241    ATOM_LEAKID_VOLTAGE               asLeakVol[2];         //Leakid and relatd voltage
5242 }ATOM_ASIC_PROFILE_VOLTAGE;
5243 
5244 //ucProfileId
5245 #define   ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE                     1
5246 #define   ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE         1
5247 #define   ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE             2
5248 
5249 typedef struct  _ATOM_ASIC_PROFILING_INFO
5250 {
5251   ATOM_COMMON_TABLE_HEADER         asHeader;
5252   ATOM_ASIC_PROFILE_VOLTAGE        asVoltage;
5253 }ATOM_ASIC_PROFILING_INFO;
5254 
5255 typedef struct  _ATOM_ASIC_PROFILING_INFO_V2_1
5256 {
5257   ATOM_COMMON_TABLE_HEADER         asHeader;
5258   UCHAR  ucLeakageBinNum;                // indicate the entry number of LeakageId/Voltage Lut table
5259   USHORT usLeakageBinArrayOffset;        // offset of USHORT Leakage Bin list array ( from lower LeakageId to higher)
5260 
5261   UCHAR  ucElbVDDC_Num;
5262   USHORT usElbVDDC_IdArrayOffset;        // offset of USHORT virtual VDDC voltage id ( 0xff01~0xff08 )
5263   USHORT usElbVDDC_LevelArrayOffset;     // offset of 2 dimension voltage level USHORT array
5264 
5265   UCHAR  ucElbVDDCI_Num;
5266   USHORT usElbVDDCI_IdArrayOffset;       // offset of USHORT virtual VDDCI voltage id ( 0xff01~0xff08 )
5267   USHORT usElbVDDCI_LevelArrayOffset;    // offset of 2 dimension voltage level USHORT array
5268 }ATOM_ASIC_PROFILING_INFO_V2_1;
5269 
5270 
5271 //Here is parameter to convert Efuse value to Measure value
5272 //Measured = LN((2^Bitsize-1)/EFUSE-1)*(Range)/(-alpha)+(Max+Min)/2
5273 typedef struct _EFUSE_LOGISTIC_FUNC_PARAM
5274 {
5275   USHORT usEfuseIndex;                  // Efuse Index in DWORD address, for example Index 911, usEuseIndex=112
5276   UCHAR  ucEfuseBitLSB;                 // Efuse bit LSB in DWORD address, for example Index 911, usEfuseBitLSB= 911-112*8=15
5277   UCHAR  ucEfuseLength;                 // Efuse bits length,
5278   ULONG  ulEfuseEncodeRange;            // Range = Max - Min, bit31 indicate the efuse is negative number
5279   ULONG  ulEfuseEncodeAverage;          // Average = ( Max + Min )/2
5280 }EFUSE_LOGISTIC_FUNC_PARAM;
5281 
5282 //Linear Function: Measured = Round ( Efuse * ( Max-Min )/(2^BitSize -1 ) + Min )
5283 typedef struct _EFUSE_LINEAR_FUNC_PARAM
5284 {
5285   USHORT usEfuseIndex;                  // Efuse Index in DWORD address, for example Index 911, usEuseIndex=112
5286   UCHAR  ucEfuseBitLSB;                 // Efuse bit LSB in DWORD address, for example Index 911, usEfuseBitLSB= 911-112*8=15
5287   UCHAR  ucEfuseLength;                 // Efuse bits length,
5288   ULONG  ulEfuseEncodeRange;            // Range = Max - Min, bit31 indicate the efuse is negative number
5289   ULONG  ulEfuseMin;                    // Min
5290 }EFUSE_LINEAR_FUNC_PARAM;
5291 
5292 
5293 typedef struct  _ATOM_ASIC_PROFILING_INFO_V3_1
5294 {
5295   ATOM_COMMON_TABLE_HEADER         asHeader;
5296   ULONG  ulEvvDerateTdp;
5297   ULONG  ulEvvDerateTdc;
5298   ULONG  ulBoardCoreTemp;
5299   ULONG  ulMaxVddc;
5300   ULONG  ulMinVddc;
5301   ULONG  ulLoadLineSlop;
5302   ULONG  ulLeakageTemp;
5303   ULONG  ulLeakageVoltage;
5304   EFUSE_LINEAR_FUNC_PARAM sCACm;
5305   EFUSE_LINEAR_FUNC_PARAM sCACb;
5306   EFUSE_LOGISTIC_FUNC_PARAM sKt_b;
5307   EFUSE_LOGISTIC_FUNC_PARAM sKv_m;
5308   EFUSE_LOGISTIC_FUNC_PARAM sKv_b;
5309   USHORT usLkgEuseIndex;
5310   UCHAR  ucLkgEfuseBitLSB;
5311   UCHAR  ucLkgEfuseLength;
5312   ULONG  ulLkgEncodeLn_MaxDivMin;
5313   ULONG  ulLkgEncodeMax;
5314   ULONG  ulLkgEncodeMin;
5315   ULONG  ulEfuseLogisticAlpha;
5316   USHORT usPowerDpm0;
5317   USHORT usCurrentDpm0;
5318   USHORT usPowerDpm1;
5319   USHORT usCurrentDpm1;
5320   USHORT usPowerDpm2;
5321   USHORT usCurrentDpm2;
5322   USHORT usPowerDpm3;
5323   USHORT usCurrentDpm3;
5324   USHORT usPowerDpm4;
5325   USHORT usCurrentDpm4;
5326   USHORT usPowerDpm5;
5327   USHORT usCurrentDpm5;
5328   USHORT usPowerDpm6;
5329   USHORT usCurrentDpm6;
5330   USHORT usPowerDpm7;
5331   USHORT usCurrentDpm7;
5332 }ATOM_ASIC_PROFILING_INFO_V3_1;
5333 
5334 
5335 typedef struct  _ATOM_ASIC_PROFILING_INFO_V3_2
5336 {
5337   ATOM_COMMON_TABLE_HEADER         asHeader;
5338   ULONG  ulEvvLkgFactor;
5339   ULONG  ulBoardCoreTemp;
5340   ULONG  ulMaxVddc;
5341   ULONG  ulMinVddc;
5342   ULONG  ulLoadLineSlop;
5343   ULONG  ulLeakageTemp;
5344   ULONG  ulLeakageVoltage;
5345   EFUSE_LINEAR_FUNC_PARAM sCACm;
5346   EFUSE_LINEAR_FUNC_PARAM sCACb;
5347   EFUSE_LOGISTIC_FUNC_PARAM sKt_b;
5348   EFUSE_LOGISTIC_FUNC_PARAM sKv_m;
5349   EFUSE_LOGISTIC_FUNC_PARAM sKv_b;
5350   USHORT usLkgEuseIndex;
5351   UCHAR  ucLkgEfuseBitLSB;
5352   UCHAR  ucLkgEfuseLength;
5353   ULONG  ulLkgEncodeLn_MaxDivMin;
5354   ULONG  ulLkgEncodeMax;
5355   ULONG  ulLkgEncodeMin;
5356   ULONG  ulEfuseLogisticAlpha;
5357   USHORT usPowerDpm0;
5358   USHORT usPowerDpm1;
5359   USHORT usPowerDpm2;
5360   USHORT usPowerDpm3;
5361   USHORT usPowerDpm4;
5362   USHORT usPowerDpm5;
5363   USHORT usPowerDpm6;
5364   USHORT usPowerDpm7;
5365   ULONG  ulTdpDerateDPM0;
5366   ULONG  ulTdpDerateDPM1;
5367   ULONG  ulTdpDerateDPM2;
5368   ULONG  ulTdpDerateDPM3;
5369   ULONG  ulTdpDerateDPM4;
5370   ULONG  ulTdpDerateDPM5;
5371   ULONG  ulTdpDerateDPM6;
5372   ULONG  ulTdpDerateDPM7;
5373 }ATOM_ASIC_PROFILING_INFO_V3_2;
5374 
5375 
5376 // for Tonga/Fiji speed EVV algorithm
5377 typedef struct  _ATOM_ASIC_PROFILING_INFO_V3_3
5378 {
5379   ATOM_COMMON_TABLE_HEADER         asHeader;
5380   ULONG  ulEvvLkgFactor;
5381   ULONG  ulBoardCoreTemp;
5382   ULONG  ulMaxVddc;
5383   ULONG  ulMinVddc;
5384   ULONG  ulLoadLineSlop;
5385   ULONG  ulLeakageTemp;
5386   ULONG  ulLeakageVoltage;
5387   EFUSE_LINEAR_FUNC_PARAM sCACm;
5388   EFUSE_LINEAR_FUNC_PARAM sCACb;
5389   EFUSE_LOGISTIC_FUNC_PARAM sKt_b;
5390   EFUSE_LOGISTIC_FUNC_PARAM sKv_m;
5391   EFUSE_LOGISTIC_FUNC_PARAM sKv_b;
5392   USHORT usLkgEuseIndex;
5393   UCHAR  ucLkgEfuseBitLSB;
5394   UCHAR  ucLkgEfuseLength;
5395   ULONG  ulLkgEncodeLn_MaxDivMin;
5396   ULONG  ulLkgEncodeMax;
5397   ULONG  ulLkgEncodeMin;
5398   ULONG  ulEfuseLogisticAlpha;
5399 
5400   union{
5401   USHORT usPowerDpm0;
5402   USHORT usParamNegFlag;          //bit0 =1 :indicate ulRoBeta is Negative, bit1=1 indicate Kv_m  max is postive
5403   };
5404   USHORT usPowerDpm1;
5405   USHORT usPowerDpm2;
5406   USHORT usPowerDpm3;
5407   USHORT usPowerDpm4;
5408   USHORT usPowerDpm5;
5409   USHORT usPowerDpm6;
5410   USHORT usPowerDpm7;
5411   ULONG  ulTdpDerateDPM0;
5412   ULONG  ulTdpDerateDPM1;
5413   ULONG  ulTdpDerateDPM2;
5414   ULONG  ulTdpDerateDPM3;
5415   ULONG  ulTdpDerateDPM4;
5416   ULONG  ulTdpDerateDPM5;
5417   ULONG  ulTdpDerateDPM6;
5418   ULONG  ulTdpDerateDPM7;
5419   EFUSE_LINEAR_FUNC_PARAM sRoFuse;
5420   ULONG  ulRoAlpha;
5421   ULONG  ulRoBeta;
5422   ULONG  ulRoGamma;
5423   ULONG  ulRoEpsilon;
5424   ULONG  ulATermRo;
5425   ULONG  ulBTermRo;
5426   ULONG  ulCTermRo;
5427   ULONG  ulSclkMargin;
5428   ULONG  ulFmaxPercent;
5429   ULONG  ulCRPercent;
5430   ULONG  ulSFmaxPercent;
5431   ULONG  ulSCRPercent;
5432   ULONG  ulSDCMargine;
5433 }ATOM_ASIC_PROFILING_INFO_V3_3;
5434 
5435 // for Fiji speed EVV algorithm
5436 typedef struct  _ATOM_ASIC_PROFILING_INFO_V3_4
5437 {
5438   ATOM_COMMON_TABLE_HEADER         asHeader;
5439   ULONG  ulEvvLkgFactor;
5440   ULONG  ulBoardCoreTemp;
5441   ULONG  ulMaxVddc;
5442   ULONG  ulMinVddc;
5443   ULONG  ulLoadLineSlop;
5444   ULONG  ulLeakageTemp;
5445   ULONG  ulLeakageVoltage;
5446   EFUSE_LINEAR_FUNC_PARAM sCACm;
5447   EFUSE_LINEAR_FUNC_PARAM sCACb;
5448   EFUSE_LOGISTIC_FUNC_PARAM sKt_b;
5449   EFUSE_LOGISTIC_FUNC_PARAM sKv_m;
5450   EFUSE_LOGISTIC_FUNC_PARAM sKv_b;
5451   USHORT usLkgEuseIndex;
5452   UCHAR  ucLkgEfuseBitLSB;
5453   UCHAR  ucLkgEfuseLength;
5454   ULONG  ulLkgEncodeLn_MaxDivMin;
5455   ULONG  ulLkgEncodeMax;
5456   ULONG  ulLkgEncodeMin;
5457   ULONG  ulEfuseLogisticAlpha;
5458   USHORT usPowerDpm0;
5459   USHORT usPowerDpm1;
5460   USHORT usPowerDpm2;
5461   USHORT usPowerDpm3;
5462   USHORT usPowerDpm4;
5463   USHORT usPowerDpm5;
5464   USHORT usPowerDpm6;
5465   USHORT usPowerDpm7;
5466   ULONG  ulTdpDerateDPM0;
5467   ULONG  ulTdpDerateDPM1;
5468   ULONG  ulTdpDerateDPM2;
5469   ULONG  ulTdpDerateDPM3;
5470   ULONG  ulTdpDerateDPM4;
5471   ULONG  ulTdpDerateDPM5;
5472   ULONG  ulTdpDerateDPM6;
5473   ULONG  ulTdpDerateDPM7;
5474   EFUSE_LINEAR_FUNC_PARAM sRoFuse;
5475   ULONG  ulEvvDefaultVddc;
5476   ULONG  ulEvvNoCalcVddc;
5477   USHORT usParamNegFlag;
5478   USHORT usSpeed_Model;
5479   ULONG  ulSM_A0;
5480   ULONG  ulSM_A1;
5481   ULONG  ulSM_A2;
5482   ULONG  ulSM_A3;
5483   ULONG  ulSM_A4;
5484   ULONG  ulSM_A5;
5485   ULONG  ulSM_A6;
5486   ULONG  ulSM_A7;
5487   UCHAR  ucSM_A0_sign;
5488   UCHAR  ucSM_A1_sign;
5489   UCHAR  ucSM_A2_sign;
5490   UCHAR  ucSM_A3_sign;
5491   UCHAR  ucSM_A4_sign;
5492   UCHAR  ucSM_A5_sign;
5493   UCHAR  ucSM_A6_sign;
5494   UCHAR  ucSM_A7_sign;
5495   ULONG ulMargin_RO_a;
5496   ULONG ulMargin_RO_b;
5497   ULONG ulMargin_RO_c;
5498   ULONG ulMargin_fixed;
5499   ULONG ulMargin_Fmax_mean;
5500   ULONG ulMargin_plat_mean;
5501   ULONG ulMargin_Fmax_sigma;
5502   ULONG ulMargin_plat_sigma;
5503   ULONG ulMargin_DC_sigma;
5504   ULONG ulReserved[8];            // Reserved for future ASIC
5505 }ATOM_ASIC_PROFILING_INFO_V3_4;
5506 
5507 // for  Polaris10/Polaris11 speed EVV algorithm
5508 typedef struct  _ATOM_ASIC_PROFILING_INFO_V3_5
5509 {
5510   ATOM_COMMON_TABLE_HEADER         asHeader;
5511   ULONG  ulMaxVddc;               //Maximum voltage for all parts, in unit of 0.01mv
5512   ULONG  ulMinVddc;               //Minimum voltage for all parts, in unit of 0.01mv
5513   USHORT usLkgEuseIndex;          //Efuse Lkg_FT address ( BYTE address )
5514   UCHAR  ucLkgEfuseBitLSB;        //Efuse Lkg_FT bit shift in 32bit DWORD
5515   UCHAR  ucLkgEfuseLength;        //Efuse Lkg_FT length
5516   ULONG  ulLkgEncodeLn_MaxDivMin; //value of ln(Max_Lkg_Ft/Min_Lkg_Ft ) in unit of 0.00001 ( unit=100000 )
5517   ULONG  ulLkgEncodeMax;          //Maximum Lkg_Ft measured value ( or efuse decode value ), in unit of 0.00001 ( unit=100000 )
5518   ULONG  ulLkgEncodeMin;          //Minimum Lkg_Ft measured value ( or efuse decode value ), in unit of 0.00001 ( unit=100000 )
5519   EFUSE_LINEAR_FUNC_PARAM sRoFuse;//Efuse RO info: DWORD address, bit shift, length, max/min measure value. in unit of 1.
5520   ULONG  ulEvvDefaultVddc;        //def="EVV_DEFAULT_VDDC" descr="return default VDDC(v) when Efuse not cut" unit="100000"/>
5521   ULONG  ulEvvNoCalcVddc;         //def="EVV_NOCALC_VDDC" descr="return VDDC(v) when Calculation is bad" unit="100000"/>
5522   ULONG  ulSpeed_Model;           //def="EVV_SPEED_MODEL" descr="0 = Greek model, 1 = multivariate model" unit="1"/>
5523   ULONG  ulSM_A0;                 //def="EVV_SM_A0" descr="Leakage coeff(Multivariant Mode)." unit="100000"/>
5524   ULONG  ulSM_A1;                 //def="EVV_SM_A1" descr="Leakage/SCLK coeff(Multivariant Mode)." unit="1000000"/>
5525   ULONG  ulSM_A2;                 //def="EVV_SM_A2" descr="Alpha( Greek Mode ) or VDDC/SCLK coeff(Multivariant Mode)." unit="100000"/>
5526   ULONG  ulSM_A3;                 //def="EVV_SM_A3" descr="Beta( Greek Mode ) or SCLK coeff(Multivariant Mode)." unit="100000"/>
5527   ULONG  ulSM_A4;                 //def="EVV_SM_A4" descr="VDDC^2/SCLK coeff(Multivariant Mode)." unit="100000"/>
5528   ULONG  ulSM_A5;                 //def="EVV_SM_A5" descr="VDDC^2 coeff(Multivariant Mode)." unit="100000"/>
5529   ULONG  ulSM_A6;                 //def="EVV_SM_A6" descr="Gamma( Greek Mode ) or VDDC coeff(Multivariant Mode)." unit="100000"/>
5530   ULONG  ulSM_A7;                 //def="EVV_SM_A7" descr="Epsilon( Greek Mode ) or constant(Multivariant Mode)." unit="100000"/>
5531   UCHAR  ucSM_A0_sign;            //def="EVV_SM_A0_SIGN" descr="=0 SM_A0 is postive. =1: SM_A0 is negative" unit="1"/>
5532   UCHAR  ucSM_A1_sign;            //def="EVV_SM_A1_SIGN" descr="=0 SM_A1 is postive. =1: SM_A1 is negative" unit="1"/>
5533   UCHAR  ucSM_A2_sign;            //def="EVV_SM_A2_SIGN" descr="=0 SM_A2 is postive. =1: SM_A2 is negative" unit="1"/>
5534   UCHAR  ucSM_A3_sign;            //def="EVV_SM_A3_SIGN" descr="=0 SM_A3 is postive. =1: SM_A3 is negative" unit="1"/>
5535   UCHAR  ucSM_A4_sign;            //def="EVV_SM_A4_SIGN" descr="=0 SM_A4 is postive. =1: SM_A4 is negative" unit="1"/>
5536   UCHAR  ucSM_A5_sign;            //def="EVV_SM_A5_SIGN" descr="=0 SM_A5 is postive. =1: SM_A5 is negative" unit="1"/>
5537   UCHAR  ucSM_A6_sign;            //def="EVV_SM_A6_SIGN" descr="=0 SM_A6 is postive. =1: SM_A6 is negative" unit="1"/>
5538   UCHAR  ucSM_A7_sign;            //def="EVV_SM_A7_SIGN" descr="=0 SM_A7 is postive. =1: SM_A7 is negative" unit="1"/>
5539   ULONG  ulMargin_RO_a;           //def="EVV_MARGIN_RO_A" descr="A Term to represent RO equation in Ax2+Bx+C, unit=1"
5540   ULONG  ulMargin_RO_b;           //def="EVV_MARGIN_RO_B" descr="B Term to represent RO equation in Ax2+Bx+C, unit=1"
5541   ULONG  ulMargin_RO_c;           //def="EVV_MARGIN_RO_C" descr="C Term to represent RO equation in Ax2+Bx+C, unit=1"
5542   ULONG  ulMargin_fixed;          //def="EVV_MARGIN_FIXED" descr="Fixed MHz to add to SCLK margin, unit=1" unit="1"/>
5543   ULONG  ulMargin_Fmax_mean;      //def="EVV_MARGIN_FMAX_MEAN" descr="Percentage to add for Fmas mean margin unit=10000" unit="10000"/>
5544   ULONG  ulMargin_plat_mean;      //def="EVV_MARGIN_PLAT_MEAN" descr="Percentage to add for platform mean margin unit=10000" unit="10000"/>
5545   ULONG  ulMargin_Fmax_sigma;     //def="EVV_MARGIN_FMAX_SIGMA" descr="Percentage to add for Fmax sigma margin unit=10000" unit="10000"/>
5546   ULONG  ulMargin_plat_sigma;     //def="EVV_MARGIN_PLAT_SIGMA" descr="Percentage to add for platform sigma margin unit=10000" unit="10000"/>
5547   ULONG  ulMargin_DC_sigma;       //def="EVV_MARGIN_DC_SIGMA" descr="Regulator DC tolerance margin (mV) unit=100" unit="100"/>
5548   ULONG  ulReserved[12];
5549 }ATOM_ASIC_PROFILING_INFO_V3_5;
5550 
5551 /* for Polars10/11 AVFS parameters */
5552 typedef struct  _ATOM_ASIC_PROFILING_INFO_V3_6
5553 {
5554   ATOM_COMMON_TABLE_HEADER         asHeader;
5555   ULONG  ulMaxVddc;
5556   ULONG  ulMinVddc;
5557   USHORT usLkgEuseIndex;
5558   UCHAR  ucLkgEfuseBitLSB;
5559   UCHAR  ucLkgEfuseLength;
5560   ULONG  ulLkgEncodeLn_MaxDivMin;
5561   ULONG  ulLkgEncodeMax;
5562   ULONG  ulLkgEncodeMin;
5563   EFUSE_LINEAR_FUNC_PARAM sRoFuse;
5564   ULONG  ulEvvDefaultVddc;
5565   ULONG  ulEvvNoCalcVddc;
5566   ULONG  ulSpeed_Model;
5567   ULONG  ulSM_A0;
5568   ULONG  ulSM_A1;
5569   ULONG  ulSM_A2;
5570   ULONG  ulSM_A3;
5571   ULONG  ulSM_A4;
5572   ULONG  ulSM_A5;
5573   ULONG  ulSM_A6;
5574   ULONG  ulSM_A7;
5575   UCHAR  ucSM_A0_sign;
5576   UCHAR  ucSM_A1_sign;
5577   UCHAR  ucSM_A2_sign;
5578   UCHAR  ucSM_A3_sign;
5579   UCHAR  ucSM_A4_sign;
5580   UCHAR  ucSM_A5_sign;
5581   UCHAR  ucSM_A6_sign;
5582   UCHAR  ucSM_A7_sign;
5583   ULONG  ulMargin_RO_a;
5584   ULONG  ulMargin_RO_b;
5585   ULONG  ulMargin_RO_c;
5586   ULONG  ulMargin_fixed;
5587   ULONG  ulMargin_Fmax_mean;
5588   ULONG  ulMargin_plat_mean;
5589   ULONG  ulMargin_Fmax_sigma;
5590   ULONG  ulMargin_plat_sigma;
5591   ULONG  ulMargin_DC_sigma;
5592   ULONG  ulLoadLineSlop;
5593   ULONG  ulaTDClimitPerDPM[8];
5594   ULONG  ulaNoCalcVddcPerDPM[8];
5595   ULONG  ulAVFS_meanNsigma_Acontant0;
5596   ULONG  ulAVFS_meanNsigma_Acontant1;
5597   ULONG  ulAVFS_meanNsigma_Acontant2;
5598   USHORT usAVFS_meanNsigma_DC_tol_sigma;
5599   USHORT usAVFS_meanNsigma_Platform_mean;
5600   USHORT usAVFS_meanNsigma_Platform_sigma;
5601   ULONG  ulGB_VDROOP_TABLE_CKSOFF_a0;
5602   ULONG  ulGB_VDROOP_TABLE_CKSOFF_a1;
5603   ULONG  ulGB_VDROOP_TABLE_CKSOFF_a2;
5604   ULONG  ulGB_VDROOP_TABLE_CKSON_a0;
5605   ULONG  ulGB_VDROOP_TABLE_CKSON_a1;
5606   ULONG  ulGB_VDROOP_TABLE_CKSON_a2;
5607   ULONG  ulAVFSGB_FUSE_TABLE_CKSOFF_m1;
5608   USHORT usAVFSGB_FUSE_TABLE_CKSOFF_m2;
5609   ULONG  ulAVFSGB_FUSE_TABLE_CKSOFF_b;
5610   ULONG  ulAVFSGB_FUSE_TABLE_CKSON_m1;
5611   USHORT usAVFSGB_FUSE_TABLE_CKSON_m2;
5612   ULONG  ulAVFSGB_FUSE_TABLE_CKSON_b;
5613   USHORT usMaxVoltage_0_25mv;
5614   UCHAR  ucEnableGB_VDROOP_TABLE_CKSOFF;
5615   UCHAR  ucEnableGB_VDROOP_TABLE_CKSON;
5616   UCHAR  ucEnableGB_FUSE_TABLE_CKSOFF;
5617   UCHAR  ucEnableGB_FUSE_TABLE_CKSON;
5618   USHORT usPSM_Age_ComFactor;
5619   UCHAR  ucEnableApplyAVFS_CKS_OFF_Voltage;
5620   UCHAR  ucReserved;
5621 }ATOM_ASIC_PROFILING_INFO_V3_6;
5622 
5623 
5624 typedef struct _ATOM_SCLK_FCW_RANGE_ENTRY_V1{
5625   ULONG  ulMaxSclkFreq;
5626   UCHAR  ucVco_setting;      // 1: 3-6GHz, 3: 2-4GHz
5627   UCHAR  ucPostdiv;          // divide by 2^n
5628   USHORT ucFcw_pcc;
5629   USHORT ucFcw_trans_upper;
5630   USHORT ucRcw_trans_lower;
5631 }ATOM_SCLK_FCW_RANGE_ENTRY_V1;
5632 
5633 
5634 // SMU_InfoTable for  Polaris10/Polaris11
5635 typedef struct  _ATOM_SMU_INFO_V2_1
5636 {
5637   ATOM_COMMON_TABLE_HEADER         asHeader;
5638   UCHAR ucSclkEntryNum;            // for potential future extend, indicate the number of ATOM_SCLK_FCW_RANGE_ENTRY_V1
5639   UCHAR ucSMUVer;
5640   UCHAR ucSharePowerSource;
5641   UCHAR ucReserved;
5642   ATOM_SCLK_FCW_RANGE_ENTRY_V1     asSclkFcwRangeEntry[8];
5643 }ATOM_SMU_INFO_V2_1;
5644 
5645 
5646 // GFX_InfoTable for Polaris10/Polaris11
5647 typedef struct  _ATOM_GFX_INFO_V2_1
5648 {
5649   ATOM_COMMON_TABLE_HEADER asHeader;
5650   UCHAR GfxIpMinVer;
5651   UCHAR GfxIpMajVer;
5652   UCHAR max_shader_engines;
5653   UCHAR max_tile_pipes;
5654   UCHAR max_cu_per_sh;
5655   UCHAR max_sh_per_se;
5656   UCHAR max_backends_per_se;
5657   UCHAR max_texture_channel_caches;
5658 }ATOM_GFX_INFO_V2_1;
5659 
5660 typedef struct  _ATOM_GFX_INFO_V2_3
5661 {
5662   ATOM_COMMON_TABLE_HEADER asHeader;
5663   UCHAR GfxIpMinVer;
5664   UCHAR GfxIpMajVer;
5665   UCHAR max_shader_engines;
5666   UCHAR max_tile_pipes;
5667   UCHAR max_cu_per_sh;
5668   UCHAR max_sh_per_se;
5669   UCHAR max_backends_per_se;
5670   UCHAR max_texture_channel_caches;
5671   USHORT usHiLoLeakageThreshold;
5672   USHORT usEdcDidtLoDpm7TableOffset; //offset of DPM7 low leakage table _ATOM_EDC_DIDT_TABLE_V1
5673   USHORT usEdcDidtHiDpm7TableOffset; //offset of DPM7 high leakage table _ATOM_EDC_DIDT_TABLE_V1
5674   USHORT usReserverd[3];
5675 }ATOM_GFX_INFO_V2_3;
5676 
5677 typedef struct _ATOM_POWER_SOURCE_OBJECT
5678 {
5679    UCHAR  ucPwrSrcId;                                   // Power source
5680    UCHAR  ucPwrSensorType;                              // GPIO, I2C or none
5681    UCHAR  ucPwrSensId;                                  // if GPIO detect, it is GPIO id,  if I2C detect, it is I2C id
5682    UCHAR  ucPwrSensSlaveAddr;                           // Slave address if I2C detect
5683    UCHAR  ucPwrSensRegIndex;                            // I2C register Index if I2C detect
5684    UCHAR  ucPwrSensRegBitMask;                          // detect which bit is used if I2C detect
5685    UCHAR  ucPwrSensActiveState;                         // high active or low active
5686    UCHAR  ucReserve[3];                                 // reserve
5687    USHORT usSensPwr;                                    // in unit of watt
5688 }ATOM_POWER_SOURCE_OBJECT;
5689 
5690 typedef struct _ATOM_POWER_SOURCE_INFO
5691 {
5692       ATOM_COMMON_TABLE_HEADER      asHeader;
5693       UCHAR                                    asPwrbehave[16];
5694       ATOM_POWER_SOURCE_OBJECT      asPwrObj[1];
5695 }ATOM_POWER_SOURCE_INFO;
5696 
5697 
5698 //Define ucPwrSrcId
5699 #define POWERSOURCE_PCIE_ID1                  0x00
5700 #define POWERSOURCE_6PIN_CONNECTOR_ID1   0x01
5701 #define POWERSOURCE_8PIN_CONNECTOR_ID1   0x02
5702 #define POWERSOURCE_6PIN_CONNECTOR_ID2   0x04
5703 #define POWERSOURCE_8PIN_CONNECTOR_ID2   0x08
5704 
5705 //define ucPwrSensorId
5706 #define POWER_SENSOR_ALWAYS                     0x00
5707 #define POWER_SENSOR_GPIO                        0x01
5708 #define POWER_SENSOR_I2C                        0x02
5709 
5710 typedef struct _ATOM_CLK_VOLT_CAPABILITY
5711 {
5712   ULONG      ulVoltageIndex;                      // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table
5713   ULONG      ulMaximumSupportedCLK;               // Maximum clock supported with specified voltage index, unit in 10kHz
5714 }ATOM_CLK_VOLT_CAPABILITY;
5715 
5716 
5717 typedef struct _ATOM_CLK_VOLT_CAPABILITY_V2
5718 {
5719   USHORT     usVoltageLevel;                      // The real Voltage Level round up value in unit of mv,
5720   ULONG      ulMaximumSupportedCLK;               // Maximum clock supported with specified voltage index, unit in 10kHz
5721 }ATOM_CLK_VOLT_CAPABILITY_V2;
5722 
5723 typedef struct _ATOM_AVAILABLE_SCLK_LIST
5724 {
5725   ULONG      ulSupportedSCLK;               // Maximum clock supported with specified voltage index,  unit in 10kHz
5726   USHORT     usVoltageIndex;                // The Voltage Index indicated by FUSE for specified SCLK
5727   USHORT     usVoltageID;                   // The Voltage ID indicated by FUSE for specified SCLK
5728 }ATOM_AVAILABLE_SCLK_LIST;
5729 
5730 // ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition
5731 #define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE             1       // refer to ulSystemConfig bit[0]
5732 
5733 // this IntegrateSystemInfoTable is used for Liano/Ontario APU
5734 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
5735 {
5736   ATOM_COMMON_TABLE_HEADER   sHeader;
5737   ULONG  ulBootUpEngineClock;
5738   ULONG  ulDentistVCOFreq;
5739   ULONG  ulBootUpUMAClock;
5740   ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
5741   ULONG  ulBootUpReqDisplayVector;
5742   ULONG  ulOtherDisplayMisc;
5743   ULONG  ulGPUCapInfo;
5744   ULONG  ulSB_MMIO_Base_Addr;
5745   USHORT usRequestedPWMFreqInHz;
5746   UCHAR  ucHtcTmpLmt;
5747   UCHAR  ucHtcHystLmt;
5748   ULONG  ulMinEngineClock;
5749   ULONG  ulSystemConfig;
5750   ULONG  ulCPUCapInfo;
5751   USHORT usNBP0Voltage;
5752   USHORT usNBP1Voltage;
5753   USHORT usBootUpNBVoltage;
5754   USHORT usExtDispConnInfoOffset;
5755   USHORT usPanelRefreshRateRange;
5756   UCHAR  ucMemoryType;
5757   UCHAR  ucUMAChannelNumber;
5758   ULONG  ulCSR_M3_ARB_CNTL_DEFAULT[10];
5759   ULONG  ulCSR_M3_ARB_CNTL_UVD[10];
5760   ULONG  ulCSR_M3_ARB_CNTL_FS3D[10];
5761   ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
5762   ULONG  ulGMCRestoreResetTime;
5763   ULONG  ulMinimumNClk;
5764   ULONG  ulIdleNClk;
5765   ULONG  ulDDR_DLL_PowerUpTime;
5766   ULONG  ulDDR_PLL_PowerUpTime;
5767   USHORT usPCIEClkSSPercentage;
5768   USHORT usPCIEClkSSType;
5769   USHORT usLvdsSSPercentage;
5770   USHORT usLvdsSSpreadRateIn10Hz;
5771   USHORT usHDMISSPercentage;
5772   USHORT usHDMISSpreadRateIn10Hz;
5773   USHORT usDVISSPercentage;
5774   USHORT usDVISSpreadRateIn10Hz;
5775   ULONG  SclkDpmBoostMargin;
5776   ULONG  SclkDpmThrottleMargin;
5777   USHORT SclkDpmTdpLimitPG;
5778   USHORT SclkDpmTdpLimitBoost;
5779   ULONG  ulBoostEngineCLock;
5780   UCHAR  ulBoostVid_2bit;
5781   UCHAR  EnableBoost;
5782   USHORT GnbTdpLimit;
5783   USHORT usMaxLVDSPclkFreqInSingleLink;
5784   UCHAR  ucLvdsMisc;
5785   UCHAR  ucLVDSReserved;
5786   ULONG  ulReserved3[15];
5787   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
5788 }ATOM_INTEGRATED_SYSTEM_INFO_V6;
5789 
5790 // ulGPUCapInfo
5791 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE       0x01
5792 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION          0x08
5793 
5794 //ucLVDSMisc:
5795 #define SYS_INFO_LVDSMISC__888_FPDI_MODE                                             0x01
5796 #define SYS_INFO_LVDSMISC__DL_CH_SWAP                                                0x02
5797 #define SYS_INFO_LVDSMISC__888_BPC                                                   0x04
5798 #define SYS_INFO_LVDSMISC__OVERRIDE_EN                                               0x08
5799 #define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW                                           0x10
5800 // new since Trinity
5801 #define SYS_INFO_LVDSMISC__TRAVIS_LVDS_VOL_OVERRIDE_EN                               0x20
5802 
5803 // not used any more
5804 #define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW                                          0x04
5805 #define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW                                          0x08
5806 
5807 /**********************************************************************************************************************
5808   ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
5809 ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
5810 ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit.
5811 ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit.
5812 sDISPCLK_Voltage:                 Report Display clock voltage requirement.
5813 
5814 ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects:
5815                                   ATOM_DEVICE_CRT1_SUPPORT                  0x0001
5816                                   ATOM_DEVICE_CRT2_SUPPORT                  0x0010
5817                                   ATOM_DEVICE_DFP1_SUPPORT                  0x0008
5818                                   ATOM_DEVICE_DFP6_SUPPORT                  0x0040
5819                                   ATOM_DEVICE_DFP2_SUPPORT                  0x0080
5820                                   ATOM_DEVICE_DFP3_SUPPORT                  0x0200
5821                                   ATOM_DEVICE_DFP4_SUPPORT                  0x0400
5822                                   ATOM_DEVICE_DFP5_SUPPORT                  0x0800
5823                                   ATOM_DEVICE_LCD1_SUPPORT                  0x0002
5824 ulOtherDisplayMisc:                 Other display related flags, not defined yet.
5825 ulGPUCapInfo:                     bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
5826                                         =1: TMDS/HDMI Coherent Mode use signel PLL mode.
5827                                   bit[3]=0: Enable HW AUX mode detection logic
5828                                         =1: Disable HW AUX mode dettion logic
5829 ulSB_MMIO_Base_Addr:              Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
5830 
5831 usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
5832                                   Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
5833 
5834                                   When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
5835                                   1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
5836                                   VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
5837                                   Changing BL using VBIOS function is functional in both driver and non-driver present environment;
5838                                   and enabling VariBri under the driver environment from PP table is optional.
5839 
5840                                   2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
5841                                   that BL control from GPU is expected.
5842                                   VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
5843                                   Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
5844                                   it's per platform
5845                                   and enabling VariBri under the driver environment from PP table is optional.
5846 
5847 ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt.
5848                                   Threshold on value to enter HTC_active state.
5849 ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt.
5850                                   To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
5851 ulMinEngineClock:                 Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
5852 ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled
5853                                         =1: PCIE Power Gating Enabled
5854                                   Bit[1]=0: DDR-DLL shut-down feature disabled.
5855                                          1: DDR-DLL shut-down feature enabled.
5856                                   Bit[2]=0: DDR-PLL Power down feature disabled.
5857                                          1: DDR-PLL Power down feature enabled.
5858 ulCPUCapInfo:                     TBD
5859 usNBP0Voltage:                    VID for voltage on NB P0 State
5860 usNBP1Voltage:                    VID for voltage on NB P1 State
5861 usBootUpNBVoltage:                Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
5862 usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
5863 usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
5864                                   to indicate a range.
5865                                   SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
5866                                   SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
5867                                   SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
5868                                   SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
5869 ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
5870 ucUMAChannelNumber:                 System memory channel numbers.
5871 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
5872 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
5873 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
5874 sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
5875 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
5876 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
5877 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
5878 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
5879 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
5880 usPCIEClkSSPercentage:            PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
5881 usPCIEClkSSType:                  PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
5882 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
5883 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
5884 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
5885 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
5886 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
5887 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
5888 usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
5889 ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
5890                                   [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
5891                                   [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
5892                                   [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
5893                                   [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
5894 **********************************************************************************************************************/
5895 
5896 // this Table is used for Liano/Ontario APU
5897 typedef struct _ATOM_FUSION_SYSTEM_INFO_V1
5898 {
5899   ATOM_INTEGRATED_SYSTEM_INFO_V6    sIntegratedSysInfo;
5900   ULONG  ulPowerplayTable[128];
5901 }ATOM_FUSION_SYSTEM_INFO_V1;
5902 
5903 
5904 typedef struct _ATOM_TDP_CONFIG_BITS
5905 {
5906 #if ATOM_BIG_ENDIAN
5907   ULONG   uReserved:2;
5908   ULONG   uTDP_Value:14;  // Original TDP value in tens of milli watts
5909   ULONG   uCTDP_Value:14; // Override value in tens of milli watts
5910   ULONG   uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
5911 #else
5912   ULONG   uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
5913   ULONG   uCTDP_Value:14; // Override value in tens of milli watts
5914   ULONG   uTDP_Value:14;  // Original TDP value in tens of milli watts
5915   ULONG   uReserved:2;
5916 #endif
5917 }ATOM_TDP_CONFIG_BITS;
5918 
5919 typedef union _ATOM_TDP_CONFIG
5920 {
5921   ATOM_TDP_CONFIG_BITS TDP_config;
5922   ULONG            TDP_config_all;
5923 }ATOM_TDP_CONFIG;
5924 
5925 /**********************************************************************************************************************
5926   ATOM_FUSION_SYSTEM_INFO_V1 Description
5927 sIntegratedSysInfo:               refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition.
5928 ulPowerplayTable[128]:            This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0]
5929 **********************************************************************************************************************/
5930 
5931 // this IntegrateSystemInfoTable is used for Trinity APU
5932 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
5933 {
5934   ATOM_COMMON_TABLE_HEADER   sHeader;
5935   ULONG  ulBootUpEngineClock;
5936   ULONG  ulDentistVCOFreq;
5937   ULONG  ulBootUpUMAClock;
5938   ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
5939   ULONG  ulBootUpReqDisplayVector;
5940   ULONG  ulOtherDisplayMisc;
5941   ULONG  ulGPUCapInfo;
5942   ULONG  ulSB_MMIO_Base_Addr;
5943   USHORT usRequestedPWMFreqInHz;
5944   UCHAR  ucHtcTmpLmt;
5945   UCHAR  ucHtcHystLmt;
5946   ULONG  ulMinEngineClock;
5947   ULONG  ulSystemConfig;
5948   ULONG  ulCPUCapInfo;
5949   USHORT usNBP0Voltage;
5950   USHORT usNBP1Voltage;
5951   USHORT usBootUpNBVoltage;
5952   USHORT usExtDispConnInfoOffset;
5953   USHORT usPanelRefreshRateRange;
5954   UCHAR  ucMemoryType;
5955   UCHAR  ucUMAChannelNumber;
5956   UCHAR  strVBIOSMsg[40];
5957   ATOM_TDP_CONFIG  asTdpConfig;
5958   ULONG  ulReserved[19];
5959   ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
5960   ULONG  ulGMCRestoreResetTime;
5961   ULONG  ulMinimumNClk;
5962   ULONG  ulIdleNClk;
5963   ULONG  ulDDR_DLL_PowerUpTime;
5964   ULONG  ulDDR_PLL_PowerUpTime;
5965   USHORT usPCIEClkSSPercentage;
5966   USHORT usPCIEClkSSType;
5967   USHORT usLvdsSSPercentage;
5968   USHORT usLvdsSSpreadRateIn10Hz;
5969   USHORT usHDMISSPercentage;
5970   USHORT usHDMISSpreadRateIn10Hz;
5971   USHORT usDVISSPercentage;
5972   USHORT usDVISSpreadRateIn10Hz;
5973   ULONG  SclkDpmBoostMargin;
5974   ULONG  SclkDpmThrottleMargin;
5975   USHORT SclkDpmTdpLimitPG;
5976   USHORT SclkDpmTdpLimitBoost;
5977   ULONG  ulBoostEngineCLock;
5978   UCHAR  ulBoostVid_2bit;
5979   UCHAR  EnableBoost;
5980   USHORT GnbTdpLimit;
5981   USHORT usMaxLVDSPclkFreqInSingleLink;
5982   UCHAR  ucLvdsMisc;
5983   UCHAR  ucTravisLVDSVolAdjust;
5984   UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
5985   UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
5986   UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
5987   UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
5988   UCHAR  ucLVDSOffToOnDelay_in4Ms;
5989   UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
5990   UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
5991   UCHAR  ucMinAllowedBL_Level;
5992   ULONG  ulLCDBitDepthControlVal;
5993   ULONG  ulNbpStateMemclkFreq[4];
5994   USHORT usNBP2Voltage;
5995   USHORT usNBP3Voltage;
5996   ULONG  ulNbpStateNClkFreq[4];
5997   UCHAR  ucNBDPMEnable;
5998   UCHAR  ucReserved[3];
5999   UCHAR  ucDPMState0VclkFid;
6000   UCHAR  ucDPMState0DclkFid;
6001   UCHAR  ucDPMState1VclkFid;
6002   UCHAR  ucDPMState1DclkFid;
6003   UCHAR  ucDPMState2VclkFid;
6004   UCHAR  ucDPMState2DclkFid;
6005   UCHAR  ucDPMState3VclkFid;
6006   UCHAR  ucDPMState3DclkFid;
6007   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
6008 }ATOM_INTEGRATED_SYSTEM_INFO_V1_7;
6009 
6010 // ulOtherDisplayMisc
6011 #define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT            0x01
6012 #define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT  0x02
6013 #define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT       0x04
6014 #define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT                         0x08
6015 
6016 // ulGPUCapInfo
6017 #define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE                0x01
6018 #define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE                               0x02
6019 #define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT                         0x08
6020 #define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS                               0x10
6021 //ulGPUCapInfo[16]=1 indicate SMC firmware is able to support GNB fast resume function, so that driver can call SMC to program most of GNB register during resuming, from ML
6022 #define SYS_INFO_GPUCAPS__GNB_FAST_RESUME_CAPABLE                         0x00010000
6023 
6024 //ulGPUCapInfo[17]=1 indicate battery boost feature is enable, from ML
6025 #define SYS_INFO_GPUCAPS__BATTERY_BOOST_ENABLE                            0x00020000
6026 
6027 /**********************************************************************************************************************
6028   ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description
6029 ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
6030 ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit.
6031 ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit.
6032 sDISPCLK_Voltage:                 Report Display clock voltage requirement.
6033 
6034 ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Trinity projects:
6035                                   ATOM_DEVICE_CRT1_SUPPORT                  0x0001
6036                                   ATOM_DEVICE_DFP1_SUPPORT                  0x0008
6037                                   ATOM_DEVICE_DFP6_SUPPORT                  0x0040
6038                                   ATOM_DEVICE_DFP2_SUPPORT                  0x0080
6039                                   ATOM_DEVICE_DFP3_SUPPORT                  0x0200
6040                                   ATOM_DEVICE_DFP4_SUPPORT                  0x0400
6041                                   ATOM_DEVICE_DFP5_SUPPORT                  0x0800
6042                                   ATOM_DEVICE_LCD1_SUPPORT                  0x0002
6043 ulOtherDisplayMisc:                 bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
6044                                         =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
6045                                   bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
6046                                         =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
6047                                   bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
6048                                         =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
6049                                   bit[3]=0: VBIOS fast boot is disable
6050                                         =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
6051 ulGPUCapInfo:                     bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
6052                                         =1: TMDS/HDMI Coherent Mode use signel PLL mode.
6053                                   bit[1]=0: DP mode use cascade PLL mode ( New for Trinity )
6054                                         =1: DP mode use single PLL mode
6055                                   bit[3]=0: Enable AUX HW mode detection logic
6056                                         =1: Disable AUX HW mode detection logic
6057 
6058 ulSB_MMIO_Base_Addr:              Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
6059 
6060 usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
6061                                   Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
6062 
6063                                   When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
6064                                   1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
6065                                   VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
6066                                   Changing BL using VBIOS function is functional in both driver and non-driver present environment;
6067                                   and enabling VariBri under the driver environment from PP table is optional.
6068 
6069                                   2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
6070                                   that BL control from GPU is expected.
6071                                   VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
6072                                   Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
6073                                   it's per platform
6074                                   and enabling VariBri under the driver environment from PP table is optional.
6075 
6076 ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt.
6077                                   Threshold on value to enter HTC_active state.
6078 ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt.
6079                                   To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
6080 ulMinEngineClock:                 Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
6081 ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled
6082                                         =1: PCIE Power Gating Enabled
6083                                   Bit[1]=0: DDR-DLL shut-down feature disabled.
6084                                          1: DDR-DLL shut-down feature enabled.
6085                                   Bit[2]=0: DDR-PLL Power down feature disabled.
6086                                          1: DDR-PLL Power down feature enabled.
6087 ulCPUCapInfo:                     TBD
6088 usNBP0Voltage:                    VID for voltage on NB P0 State
6089 usNBP1Voltage:                    VID for voltage on NB P1 State
6090 usNBP2Voltage:                    VID for voltage on NB P2 State
6091 usNBP3Voltage:                    VID for voltage on NB P3 State
6092 usBootUpNBVoltage:                Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
6093 usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
6094 usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
6095                                   to indicate a range.
6096                                   SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
6097                                   SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
6098                                   SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
6099                                   SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
6100 ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
6101 ucUMAChannelNumber:                 System memory channel numbers.
6102 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
6103 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
6104 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
6105 sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
6106 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
6107 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
6108 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
6109 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
6110 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
6111 usPCIEClkSSPercentage:            PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
6112 usPCIEClkSSType:                  PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
6113 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
6114 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
6115 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
6116 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
6117 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
6118 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
6119 usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
6120 ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
6121                                   [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
6122                                   [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
6123                                   [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
6124                                   [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
6125                                   [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
6126 ucTravisLVDSVolAdjust             When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
6127                                   value to program Travis register LVDS_CTRL_4
6128 ucLVDSPwrOnSeqDIGONtoDE_in4Ms:    LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
6129                                   =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
6130                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6131 ucLVDSPwrOnDEtoVARY_BL_in4Ms:     LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
6132                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
6133                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6134 
6135 ucLVDSPwrOffVARY_BLtoDE_in4Ms:    LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
6136                                   =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
6137                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6138 
6139 ucLVDSPwrOffDEtoDIGON_in4Ms:      LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
6140                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
6141                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6142 
6143 ucLVDSOffToOnDelay_in4Ms:         LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
6144                                   =0 means to use VBIOS default delay which is 125 ( 500ms ).
6145                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6146 
6147 ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
6148                                   LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
6149                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
6150                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6151 
6152 ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
6153                                   LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
6154                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
6155                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6156 
6157 ucMinAllowedBL_Level:             Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
6158 
6159 ulNbpStateMemclkFreq[4]:          system memory clock frequncey in unit of 10Khz in different NB pstate.
6160 
6161 **********************************************************************************************************************/
6162 
6163 // this IntegrateSystemInfoTable is used for Kaveri & Kabini APU
6164 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8
6165 {
6166   ATOM_COMMON_TABLE_HEADER   sHeader;
6167   ULONG  ulBootUpEngineClock;
6168   ULONG  ulDentistVCOFreq;
6169   ULONG  ulBootUpUMAClock;
6170   ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
6171   ULONG  ulBootUpReqDisplayVector;
6172   ULONG  ulVBIOSMisc;
6173   ULONG  ulGPUCapInfo;
6174   ULONG  ulDISP_CLK2Freq;
6175   USHORT usRequestedPWMFreqInHz;
6176   UCHAR  ucHtcTmpLmt;
6177   UCHAR  ucHtcHystLmt;
6178   ULONG  ulReserved2;
6179   ULONG  ulSystemConfig;
6180   ULONG  ulCPUCapInfo;
6181   ULONG  ulReserved3;
6182   USHORT usGPUReservedSysMemSize;
6183   USHORT usExtDispConnInfoOffset;
6184   USHORT usPanelRefreshRateRange;
6185   UCHAR  ucMemoryType;
6186   UCHAR  ucUMAChannelNumber;
6187   UCHAR  strVBIOSMsg[40];
6188   ATOM_TDP_CONFIG  asTdpConfig;
6189   ULONG  ulReserved[19];
6190   ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
6191   ULONG  ulGMCRestoreResetTime;
6192   ULONG  ulReserved4;
6193   ULONG  ulIdleNClk;
6194   ULONG  ulDDR_DLL_PowerUpTime;
6195   ULONG  ulDDR_PLL_PowerUpTime;
6196   USHORT usPCIEClkSSPercentage;
6197   USHORT usPCIEClkSSType;
6198   USHORT usLvdsSSPercentage;
6199   USHORT usLvdsSSpreadRateIn10Hz;
6200   USHORT usHDMISSPercentage;
6201   USHORT usHDMISSpreadRateIn10Hz;
6202   USHORT usDVISSPercentage;
6203   USHORT usDVISSpreadRateIn10Hz;
6204   ULONG  ulGPUReservedSysMemBaseAddrLo;
6205   ULONG  ulGPUReservedSysMemBaseAddrHi;
6206   ATOM_CLK_VOLT_CAPABILITY   s5thDISPCLK_Voltage;
6207   ULONG  ulReserved5;
6208   USHORT usMaxLVDSPclkFreqInSingleLink;
6209   UCHAR  ucLvdsMisc;
6210   UCHAR  ucTravisLVDSVolAdjust;
6211   UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
6212   UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
6213   UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
6214   UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
6215   UCHAR  ucLVDSOffToOnDelay_in4Ms;
6216   UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
6217   UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
6218   UCHAR  ucMinAllowedBL_Level;
6219   ULONG  ulLCDBitDepthControlVal;
6220   ULONG  ulNbpStateMemclkFreq[4];
6221   ULONG  ulPSPVersion;
6222   ULONG  ulNbpStateNClkFreq[4];
6223   USHORT usNBPStateVoltage[4];
6224   USHORT usBootUpNBVoltage;
6225   USHORT usReserved2;
6226   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
6227 }ATOM_INTEGRATED_SYSTEM_INFO_V1_8;
6228 
6229 /**********************************************************************************************************************
6230   ATOM_INTEGRATED_SYSTEM_INFO_V1_8 Description
6231 ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
6232 ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit.
6233 ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit.
6234 sDISPCLK_Voltage:                 Report Display clock frequency requirement on GNB voltage(up to 4 voltage levels).
6235 
6236 ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Trinity projects:
6237                                   ATOM_DEVICE_CRT1_SUPPORT                  0x0001
6238                                   ATOM_DEVICE_DFP1_SUPPORT                  0x0008
6239                                   ATOM_DEVICE_DFP6_SUPPORT                  0x0040
6240                                   ATOM_DEVICE_DFP2_SUPPORT                  0x0080
6241                                   ATOM_DEVICE_DFP3_SUPPORT                  0x0200
6242                                   ATOM_DEVICE_DFP4_SUPPORT                  0x0400
6243                                   ATOM_DEVICE_DFP5_SUPPORT                  0x0800
6244                                   ATOM_DEVICE_LCD1_SUPPORT                  0x0002
6245 
6246 ulVBIOSMisc:                       Miscellenous flags for VBIOS requirement and interface
6247                                   bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
6248                                         =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
6249                                   bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
6250                                         =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
6251                                   bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
6252                                         =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
6253                                   bit[3]=0: VBIOS fast boot is disable
6254                                         =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
6255 
6256 ulGPUCapInfo:                     bit[0~2]= Reserved
6257                                   bit[3]=0: Enable AUX HW mode detection logic
6258                                         =1: Disable AUX HW mode detection logic
6259                                   bit[4]=0: Disable DFS bypass feature
6260                                         =1: Enable DFS bypass feature
6261 
6262 usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
6263                                   Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
6264 
6265                                   When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
6266                                   1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
6267                                   VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
6268                                   Changing BL using VBIOS function is functional in both driver and non-driver present environment;
6269                                   and enabling VariBri under the driver environment from PP table is optional.
6270 
6271                                   2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
6272                                   that BL control from GPU is expected.
6273                                   VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
6274                                   Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
6275                                   it's per platform
6276                                   and enabling VariBri under the driver environment from PP table is optional.
6277 
6278 ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt. Threshold on value to enter HTC_active state.
6279 ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt.
6280                                   To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
6281 
6282 ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled
6283                                         =1: PCIE Power Gating Enabled
6284                                   Bit[1]=0: DDR-DLL shut-down feature disabled.
6285                                          1: DDR-DLL shut-down feature enabled.
6286                                   Bit[2]=0: DDR-PLL Power down feature disabled.
6287                                          1: DDR-PLL Power down feature enabled.
6288                                   Bit[3]=0: GNB DPM is disabled
6289                                         =1: GNB DPM is enabled
6290 ulCPUCapInfo:                     TBD
6291 
6292 usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
6293 usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
6294                                   to indicate a range.
6295                                   SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
6296                                   SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
6297                                   SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
6298                                   SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
6299 
6300 ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3;=5:GDDR5; [7:4] is reserved.
6301 ucUMAChannelNumber:                 System memory channel numbers.
6302 
6303 strVBIOSMsg[40]:                  VBIOS boot up customized message string
6304 
6305 sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
6306 
6307 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
6308 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state, used to calculate self-refresh latency. Unit in 10kHz.
6309 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
6310 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
6311 
6312 usPCIEClkSSPercentage:            PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
6313 usPCIEClkSSType:                  PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
6314 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
6315 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
6316 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
6317 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
6318 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
6319 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
6320 
6321 usGPUReservedSysMemSize:          Reserved system memory size for ACP engine in APU GNB, units in MB. 0/2/4MB based on CMOS options, current default could be 0MB. KV only, not on KB.
6322 ulGPUReservedSysMemBaseAddrLo:    Low 32 bits base address to the reserved system memory.
6323 ulGPUReservedSysMemBaseAddrHi:    High 32 bits base address to the reserved system memory.
6324 
6325 usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
6326 ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
6327                                   [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
6328                                   [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
6329                                   [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
6330                                   [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
6331                                   [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
6332 ucTravisLVDSVolAdjust             When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
6333                                   value to program Travis register LVDS_CTRL_4
6334 ucLVDSPwrOnSeqDIGONtoDE_in4Ms:
6335                                   LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
6336                                   =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
6337                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6338 ucLVDSPwrOnDEtoVARY_BL_in4Ms:
6339                                   LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
6340                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
6341                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6342 ucLVDSPwrOffVARY_BLtoDE_in4Ms:
6343                                   LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
6344                                   =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
6345                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6346 ucLVDSPwrOffDEtoDIGON_in4Ms:
6347                                    LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
6348                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
6349                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6350 ucLVDSOffToOnDelay_in4Ms:
6351                                   LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
6352                                   =0 means to use VBIOS default delay which is 125 ( 500ms ).
6353                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6354 ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
6355                                   LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
6356                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
6357                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6358 
6359 ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
6360                                   LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
6361                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
6362                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
6363 ucMinAllowedBL_Level:             Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
6364 
6365 ulLCDBitDepthControlVal:          GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL
6366 
6367 ulNbpStateMemclkFreq[4]:          system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
6368 ulNbpStateNClkFreq[4]:            NB P-State NClk frequency in different NB P-State
6369 usNBPStateVoltage[4]:             NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage
6370 usBootUpNBVoltage:                NB P-State voltage during boot up before driver loaded
6371 sExtDispConnInfo:                 Display connector information table provided to VBIOS
6372 
6373 **********************************************************************************************************************/
6374 
6375 typedef struct _ATOM_I2C_REG_INFO
6376 {
6377   UCHAR ucI2cRegIndex;
6378   UCHAR ucI2cRegVal;
6379 }ATOM_I2C_REG_INFO;
6380 
6381 // this IntegrateSystemInfoTable is used for Carrizo
6382 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_9
6383 {
6384   ATOM_COMMON_TABLE_HEADER   sHeader;
6385   ULONG  ulBootUpEngineClock;
6386   ULONG  ulDentistVCOFreq;
6387   ULONG  ulBootUpUMAClock;
6388   ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];       // no longer used, keep it as is to avoid driver compiling error
6389   ULONG  ulBootUpReqDisplayVector;
6390   ULONG  ulVBIOSMisc;
6391   ULONG  ulGPUCapInfo;
6392   ULONG  ulDISP_CLK2Freq;
6393   USHORT usRequestedPWMFreqInHz;
6394   UCHAR  ucHtcTmpLmt;
6395   UCHAR  ucHtcHystLmt;
6396   ULONG  ulReserved2;
6397   ULONG  ulSystemConfig;
6398   ULONG  ulCPUCapInfo;
6399   ULONG  ulReserved3;
6400   USHORT usGPUReservedSysMemSize;
6401   USHORT usExtDispConnInfoOffset;
6402   USHORT usPanelRefreshRateRange;
6403   UCHAR  ucMemoryType;
6404   UCHAR  ucUMAChannelNumber;
6405   UCHAR  strVBIOSMsg[40];
6406   ATOM_TDP_CONFIG  asTdpConfig;
6407   UCHAR  ucExtHDMIReDrvSlvAddr;
6408   UCHAR  ucExtHDMIReDrvRegNum;
6409   ATOM_I2C_REG_INFO asExtHDMIRegSetting[9];
6410   ULONG  ulReserved[2];
6411   ATOM_CLK_VOLT_CAPABILITY_V2   sDispClkVoltageMapping[8];
6412   ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];            // no longer used, keep it as is to avoid driver compiling error
6413   ULONG  ulGMCRestoreResetTime;
6414   ULONG  ulReserved4;
6415   ULONG  ulIdleNClk;
6416   ULONG  ulDDR_DLL_PowerUpTime;
6417   ULONG  ulDDR_PLL_PowerUpTime;
6418   USHORT usPCIEClkSSPercentage;
6419   USHORT usPCIEClkSSType;
6420   USHORT usLvdsSSPercentage;
6421   USHORT usLvdsSSpreadRateIn10Hz;
6422   USHORT usHDMISSPercentage;
6423   USHORT usHDMISSpreadRateIn10Hz;
6424   USHORT usDVISSPercentage;
6425   USHORT usDVISSpreadRateIn10Hz;
6426   ULONG  ulGPUReservedSysMemBaseAddrLo;
6427   ULONG  ulGPUReservedSysMemBaseAddrHi;
6428   ULONG  ulReserved5[3];
6429   USHORT usMaxLVDSPclkFreqInSingleLink;
6430   UCHAR  ucLvdsMisc;
6431   UCHAR  ucTravisLVDSVolAdjust;
6432   UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
6433   UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
6434   UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
6435   UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
6436   UCHAR  ucLVDSOffToOnDelay_in4Ms;
6437   UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
6438   UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
6439   UCHAR  ucMinAllowedBL_Level;
6440   ULONG  ulLCDBitDepthControlVal;
6441   ULONG  ulNbpStateMemclkFreq[4];          // only 2 level is changed.
6442   ULONG  ulPSPVersion;
6443   ULONG  ulNbpStateNClkFreq[4];
6444   USHORT usNBPStateVoltage[4];
6445   USHORT usBootUpNBVoltage;
6446   UCHAR  ucEDPv1_4VSMode;
6447   UCHAR  ucReserved2;
6448   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
6449 }ATOM_INTEGRATED_SYSTEM_INFO_V1_9;
6450 
6451 
6452 // definition for ucEDPv1_4VSMode
6453 #define EDP_VS_LEGACY_MODE                  0
6454 #define EDP_VS_LOW_VDIFF_MODE               1
6455 #define EDP_VS_HIGH_VDIFF_MODE              2
6456 #define EDP_VS_STRETCH_MODE                 3
6457 #define EDP_VS_SINGLE_VDIFF_MODE            4
6458 #define EDP_VS_VARIABLE_PREM_MODE           5
6459 
6460 
6461 // ulGPUCapInfo
6462 #define SYS_INFO_V1_9_GPUCAPSINFO_DISABLE_AUX_MODE_DETECT                         0x08
6463 #define SYS_INFO_V1_9_GPUCAPSINFO_ENABEL_DFS_BYPASS                               0x10
6464 //ulGPUCapInfo[16]=1 indicate SMC firmware is able to support GNB fast resume function, so that driver can call SMC to program most of GNB register during resuming, from ML
6465 #define SYS_INFO_V1_9_GPUCAPSINFO_GNB_FAST_RESUME_CAPABLE                         0x00010000
6466 //ulGPUCapInfo[18]=1 indicate the IOMMU is not available
6467 #define SYS_INFO_V1_9_GPUCAPINFO_IOMMU_DISABLE                                    0x00040000
6468 //ulGPUCapInfo[19]=1 indicate the MARC Aperture is opened.
6469 #define SYS_INFO_V1_9_GPUCAPINFO_MARC_APERTURE_ENABLE                             0x00080000
6470 
6471 
6472 typedef struct _DPHY_TIMING_PARA
6473 {
6474     UCHAR  ucProfileID;       // SENSOR_PROFILES
6475     ULONG  ucPara;
6476 } DPHY_TIMING_PARA;
6477 
6478 typedef struct _DPHY_ELEC_PARA
6479 {
6480     USHORT  usPara[3];
6481 } DPHY_ELEC_PARA;
6482 
6483 typedef struct _CAMERA_MODULE_INFO
6484 {
6485     UCHAR    ucID;                    // 0: Rear, 1: Front right of user, 2: Front left of user
6486     UCHAR    strModuleName[8];
6487     DPHY_TIMING_PARA asTimingPara[6]; // Exact number is under estimation and confirmation from sensor vendor
6488 } CAMERA_MODULE_INFO;
6489 
6490 typedef struct _FLASHLIGHT_INFO
6491 {
6492     UCHAR    ucID;         // 0: Rear, 1: Front
6493     UCHAR    strName[8];
6494 } FLASHLIGHT_INFO;
6495 
6496 typedef struct _CAMERA_DATA
6497 {
6498     ULONG                   ulVersionCode;
6499     CAMERA_MODULE_INFO      asCameraInfo[3];     // Assuming 3 camera sensors max
6500     FLASHLIGHT_INFO         asFlashInfo;      // Assuming 1 flashlight max
6501     DPHY_ELEC_PARA          asDphyElecPara;
6502     ULONG                   ulCrcVal;         // CRC
6503 }CAMERA_DATA;
6504 
6505 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_10
6506 {
6507   ATOM_COMMON_TABLE_HEADER   sHeader;
6508   ULONG  ulBootUpEngineClock;
6509   ULONG  ulDentistVCOFreq;
6510   ULONG  ulBootUpUMAClock;
6511   ULONG  ulReserved0[8];
6512   ULONG  ulBootUpReqDisplayVector;
6513   ULONG  ulVBIOSMisc;
6514   ULONG  ulGPUCapInfo;
6515   ULONG  ulReserved1;
6516   USHORT usRequestedPWMFreqInHz;
6517   UCHAR  ucHtcTmpLmt;
6518   UCHAR  ucHtcHystLmt;
6519   ULONG  ulReserved2;
6520   ULONG  ulSystemConfig;
6521   ULONG  ulCPUCapInfo;
6522   ULONG  ulReserved3;
6523   USHORT usGPUReservedSysMemSize;
6524   USHORT usExtDispConnInfoOffset;
6525   USHORT usPanelRefreshRateRange;
6526   UCHAR  ucMemoryType;
6527   UCHAR  ucUMAChannelNumber;
6528   ULONG  ulMsgReserved[10];
6529   ATOM_TDP_CONFIG  asTdpConfig;
6530   ULONG  ulReserved[7];
6531   ATOM_CLK_VOLT_CAPABILITY_V2   sDispClkVoltageMapping[8];
6532   ULONG  ulReserved6[10];
6533   ULONG  ulGMCRestoreResetTime;
6534   ULONG  ulReserved4;
6535   ULONG  ulIdleNClk;
6536   ULONG  ulDDR_DLL_PowerUpTime;
6537   ULONG  ulDDR_PLL_PowerUpTime;
6538   USHORT usPCIEClkSSPercentage;
6539   USHORT usPCIEClkSSType;
6540   USHORT usLvdsSSPercentage;
6541   USHORT usLvdsSSpreadRateIn10Hz;
6542   USHORT usHDMISSPercentage;
6543   USHORT usHDMISSpreadRateIn10Hz;
6544   USHORT usDVISSPercentage;
6545   USHORT usDVISSpreadRateIn10Hz;
6546   ULONG  ulGPUReservedSysMemBaseAddrLo;
6547   ULONG  ulGPUReservedSysMemBaseAddrHi;
6548   ULONG  ulReserved5[3];
6549   USHORT usMaxLVDSPclkFreqInSingleLink;
6550   UCHAR  ucLvdsMisc;
6551   UCHAR  ucTravisLVDSVolAdjust;
6552   UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
6553   UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
6554   UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
6555   UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
6556   UCHAR  ucLVDSOffToOnDelay_in4Ms;
6557   UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
6558   UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
6559   UCHAR  ucMinAllowedBL_Level;
6560   ULONG  ulLCDBitDepthControlVal;
6561   ULONG  ulNbpStateMemclkFreq[2];
6562   ULONG  ulReserved7[2];
6563   ULONG  ulPSPVersion;
6564   ULONG  ulNbpStateNClkFreq[4];
6565   USHORT usNBPStateVoltage[4];
6566   USHORT usBootUpNBVoltage;
6567   UCHAR  ucEDPv1_4VSMode;
6568   UCHAR  ucReserved2;
6569   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
6570   CAMERA_DATA asCameraInfo;
6571   ULONG  ulReserved8[29];
6572 }ATOM_INTEGRATED_SYSTEM_INFO_V1_10;
6573 
6574 
6575 // this Table is used for Kaveri/Kabini APU
6576 typedef struct _ATOM_FUSION_SYSTEM_INFO_V2
6577 {
6578   ATOM_INTEGRATED_SYSTEM_INFO_V1_8    sIntegratedSysInfo;       // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition
6579   ULONG                               ulPowerplayTable[128];    // Update comments here to link new powerplay table definition structure
6580 }ATOM_FUSION_SYSTEM_INFO_V2;
6581 
6582 
6583 typedef struct _ATOM_FUSION_SYSTEM_INFO_V3
6584 {
6585   ATOM_INTEGRATED_SYSTEM_INFO_V1_10   sIntegratedSysInfo;           // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition
6586   ULONG                               ulPowerplayTable[192];        // Reserve 768 bytes space for PowerPlayInfoTable
6587 }ATOM_FUSION_SYSTEM_INFO_V3;
6588 
6589 #define FUSION_V3_OFFSET_FROM_TOP_OF_FB 0x800
6590 
6591 /**************************************************************************/
6592 // This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design
6593 //Memory SS Info Table
6594 //Define Memory Clock SS chip ID
6595 #define ICS91719  1
6596 #define ICS91720  2
6597 
6598 //Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol
6599 typedef struct _ATOM_I2C_DATA_RECORD
6600 {
6601   UCHAR         ucNunberOfBytes;                                              //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
6602   UCHAR         ucI2CData[1];                                                 //I2C data in bytes, should be less than 16 bytes usually
6603 }ATOM_I2C_DATA_RECORD;
6604 
6605 
6606 //Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information
6607 typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
6608 {
6609   ATOM_I2C_ID_CONFIG_ACCESS       sucI2cId;               //I2C line and HW/SW assisted cap.
6610   UCHAR                              ucSSChipID;             //SS chip being used
6611   UCHAR                              ucSSChipSlaveAddr;      //Slave Address to set up this SS chip
6612   UCHAR                           ucNumOfI2CDataRecords;  //number of data block
6613   ATOM_I2C_DATA_RECORD            asI2CData[1];
6614 }ATOM_I2C_DEVICE_SETUP_INFO;
6615 
6616 //==========================================================================================
6617 typedef struct  _ATOM_ASIC_MVDD_INFO
6618 {
6619   ATOM_COMMON_TABLE_HEADER         sHeader;
6620   ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[1];
6621 }ATOM_ASIC_MVDD_INFO;
6622 
6623 //==========================================================================================
6624 #define ATOM_MCLK_SS_INFO         ATOM_ASIC_MVDD_INFO
6625 
6626 //==========================================================================================
6627 /**************************************************************************/
6628 
6629 typedef struct _ATOM_ASIC_SS_ASSIGNMENT
6630 {
6631    ULONG                        ulTargetClockRange;                  //Clock Out frequence (VCO ), in unit of 10Khz
6632   USHORT              usSpreadSpectrumPercentage;      //in unit of 0.01%
6633    USHORT                     usSpreadRateInKhz;                  //in unit of kHz, modulation freq
6634   UCHAR               ucClockIndication;                 //Indicate which clock source needs SS
6635    UCHAR                        ucSpreadSpectrumMode;               //Bit1=0 Down Spread,=1 Center Spread.
6636    UCHAR                        ucReserved[2];
6637 }ATOM_ASIC_SS_ASSIGNMENT;
6638 
6639 //Define ucClockIndication, SW uses the IDs below to search if the SS is requried/enabled on a clock branch/signal type.
6640 //SS is not required or enabled if a match is not found.
6641 #define ASIC_INTERNAL_MEMORY_SS            1
6642 #define ASIC_INTERNAL_ENGINE_SS            2
6643 #define ASIC_INTERNAL_UVD_SS             3
6644 #define ASIC_INTERNAL_SS_ON_TMDS         4
6645 #define ASIC_INTERNAL_SS_ON_HDMI         5
6646 #define ASIC_INTERNAL_SS_ON_LVDS         6
6647 #define ASIC_INTERNAL_SS_ON_DP           7
6648 #define ASIC_INTERNAL_SS_ON_DCPLL        8
6649 #define ASIC_EXTERNAL_SS_ON_DP_CLOCK     9
6650 #define ASIC_INTERNAL_VCE_SS             10
6651 #define ASIC_INTERNAL_GPUPLL_SS          11
6652 
6653 
6654 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
6655 {
6656    ULONG                        ulTargetClockRange;                  //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
6657                                                     //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
6658   USHORT              usSpreadSpectrumPercentage;      //in unit of 0.01%
6659    USHORT                     usSpreadRateIn10Hz;                  //in unit of 10Hz, modulation freq
6660   UCHAR               ucClockIndication;                 //Indicate which clock source needs SS
6661    UCHAR                        ucSpreadSpectrumMode;               //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
6662    UCHAR                        ucReserved[2];
6663 }ATOM_ASIC_SS_ASSIGNMENT_V2;
6664 
6665 //ucSpreadSpectrumMode
6666 //#define ATOM_SS_DOWN_SPREAD_MODE_MASK          0x00000000
6667 //#define ATOM_SS_DOWN_SPREAD_MODE               0x00000000
6668 //#define ATOM_SS_CENTRE_SPREAD_MODE_MASK        0x00000001
6669 //#define ATOM_SS_CENTRE_SPREAD_MODE             0x00000001
6670 //#define ATOM_INTERNAL_SS_MASK                  0x00000000
6671 //#define ATOM_EXTERNAL_SS_MASK                  0x00000002
6672 
6673 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO
6674 {
6675   ATOM_COMMON_TABLE_HEADER         sHeader;
6676   ATOM_ASIC_SS_ASSIGNMENT            asSpreadSpectrum[4];
6677 }ATOM_ASIC_INTERNAL_SS_INFO;
6678 
6679 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V2
6680 {
6681   ATOM_COMMON_TABLE_HEADER         sHeader;
6682   ATOM_ASIC_SS_ASSIGNMENT_V2        asSpreadSpectrum[1];      //this is point only.
6683 }ATOM_ASIC_INTERNAL_SS_INFO_V2;
6684 
6685 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3
6686 {
6687    ULONG                        ulTargetClockRange;                  //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
6688                                                     //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
6689   USHORT              usSpreadSpectrumPercentage;      //in unit of 0.01% or 0.001%, decided by ucSpreadSpectrumMode bit4
6690    USHORT                     usSpreadRateIn10Hz;                  //in unit of 10Hz, modulation freq
6691   UCHAR               ucClockIndication;                 //Indicate which clock source needs SS
6692    UCHAR                        ucSpreadSpectrumMode;               //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
6693    UCHAR                        ucReserved[2];
6694 }ATOM_ASIC_SS_ASSIGNMENT_V3;
6695 
6696 //ATOM_ASIC_SS_ASSIGNMENT_V3.ucSpreadSpectrumMode
6697 #define SS_MODE_V3_CENTRE_SPREAD_MASK             0x01
6698 #define SS_MODE_V3_EXTERNAL_SS_MASK               0x02
6699 #define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK    0x10
6700 
6701 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
6702 {
6703   ATOM_COMMON_TABLE_HEADER         sHeader;
6704   ATOM_ASIC_SS_ASSIGNMENT_V3        asSpreadSpectrum[1];      //this is pointer only.
6705 }ATOM_ASIC_INTERNAL_SS_INFO_V3;
6706 
6707 
6708 //==============================Scratch Pad Definition Portion===============================
6709 #define ATOM_DEVICE_CONNECT_INFO_DEF  0
6710 #define ATOM_ROM_LOCATION_DEF         1
6711 #define ATOM_TV_STANDARD_DEF          2
6712 #define ATOM_ACTIVE_INFO_DEF          3
6713 #define ATOM_LCD_INFO_DEF             4
6714 #define ATOM_DOS_REQ_INFO_DEF         5
6715 #define ATOM_ACC_CHANGE_INFO_DEF      6
6716 #define ATOM_DOS_MODE_INFO_DEF        7
6717 #define ATOM_I2C_CHANNEL_STATUS_DEF   8
6718 #define ATOM_I2C_CHANNEL_STATUS1_DEF  9
6719 #define ATOM_INTERNAL_TIMER_DEF       10
6720 
6721 // BIOS_0_SCRATCH Definition
6722 #define ATOM_S0_CRT1_MONO               0x00000001L
6723 #define ATOM_S0_CRT1_COLOR              0x00000002L
6724 #define ATOM_S0_CRT1_MASK               (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
6725 
6726 #define ATOM_S0_TV1_COMPOSITE_A         0x00000004L
6727 #define ATOM_S0_TV1_SVIDEO_A            0x00000008L
6728 #define ATOM_S0_TV1_MASK_A              (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
6729 
6730 #define ATOM_S0_CV_A                    0x00000010L
6731 #define ATOM_S0_CV_DIN_A                0x00000020L
6732 #define ATOM_S0_CV_MASK_A               (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
6733 
6734 
6735 #define ATOM_S0_CRT2_MONO               0x00000100L
6736 #define ATOM_S0_CRT2_COLOR              0x00000200L
6737 #define ATOM_S0_CRT2_MASK               (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
6738 
6739 #define ATOM_S0_TV1_COMPOSITE           0x00000400L
6740 #define ATOM_S0_TV1_SVIDEO              0x00000800L
6741 #define ATOM_S0_TV1_SCART               0x00004000L
6742 #define ATOM_S0_TV1_MASK                (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
6743 
6744 #define ATOM_S0_CV                      0x00001000L
6745 #define ATOM_S0_CV_DIN                  0x00002000L
6746 #define ATOM_S0_CV_MASK                 (ATOM_S0_CV+ATOM_S0_CV_DIN)
6747 
6748 #define ATOM_S0_DFP1                    0x00010000L
6749 #define ATOM_S0_DFP2                    0x00020000L
6750 #define ATOM_S0_LCD1                    0x00040000L
6751 #define ATOM_S0_LCD2                    0x00080000L
6752 #define ATOM_S0_DFP6                    0x00100000L
6753 #define ATOM_S0_DFP3                    0x00200000L
6754 #define ATOM_S0_DFP4                    0x00400000L
6755 #define ATOM_S0_DFP5                    0x00800000L
6756 
6757 
6758 #define ATOM_S0_DFP_MASK                ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 | ATOM_S0_DFP6
6759 
6760 #define ATOM_S0_FAD_REGISTER_BUG        0x02000000L // If set, indicates we are running a PCIE asic with
6761                                                     // the FAD/HDP reg access bug.  Bit is read by DAL, this is obsolete from RV5xx
6762 
6763 #define ATOM_S0_THERMAL_STATE_MASK      0x1C000000L
6764 #define ATOM_S0_THERMAL_STATE_SHIFT     26
6765 
6766 #define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
6767 #define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
6768 
6769 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC     1
6770 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC     2
6771 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
6772 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4
6773 
6774 //Byte aligned defintion for BIOS usage
6775 #define ATOM_S0_CRT1_MONOb0             0x01
6776 #define ATOM_S0_CRT1_COLORb0            0x02
6777 #define ATOM_S0_CRT1_MASKb0             (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
6778 
6779 #define ATOM_S0_TV1_COMPOSITEb0         0x04
6780 #define ATOM_S0_TV1_SVIDEOb0            0x08
6781 #define ATOM_S0_TV1_MASKb0              (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
6782 
6783 #define ATOM_S0_CVb0                    0x10
6784 #define ATOM_S0_CV_DINb0                0x20
6785 #define ATOM_S0_CV_MASKb0               (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
6786 
6787 #define ATOM_S0_CRT2_MONOb1             0x01
6788 #define ATOM_S0_CRT2_COLORb1            0x02
6789 #define ATOM_S0_CRT2_MASKb1             (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
6790 
6791 #define ATOM_S0_TV1_COMPOSITEb1         0x04
6792 #define ATOM_S0_TV1_SVIDEOb1            0x08
6793 #define ATOM_S0_TV1_SCARTb1             0x40
6794 #define ATOM_S0_TV1_MASKb1              (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
6795 
6796 #define ATOM_S0_CVb1                    0x10
6797 #define ATOM_S0_CV_DINb1                0x20
6798 #define ATOM_S0_CV_MASKb1               (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
6799 
6800 #define ATOM_S0_DFP1b2                  0x01
6801 #define ATOM_S0_DFP2b2                  0x02
6802 #define ATOM_S0_LCD1b2                  0x04
6803 #define ATOM_S0_LCD2b2                  0x08
6804 #define ATOM_S0_DFP6b2                  0x10
6805 #define ATOM_S0_DFP3b2                  0x20
6806 #define ATOM_S0_DFP4b2                  0x40
6807 #define ATOM_S0_DFP5b2                  0x80
6808 
6809 
6810 #define ATOM_S0_THERMAL_STATE_MASKb3    0x1C
6811 #define ATOM_S0_THERMAL_STATE_SHIFTb3   2
6812 
6813 #define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
6814 #define ATOM_S0_LCD1_SHIFT              18
6815 
6816 // BIOS_1_SCRATCH Definition
6817 #define ATOM_S1_ROM_LOCATION_MASK       0x0000FFFFL
6818 #define ATOM_S1_PCI_BUS_DEV_MASK        0xFFFF0000L
6819 
6820 //   BIOS_2_SCRATCH Definition
6821 #define ATOM_S2_TV1_STANDARD_MASK       0x0000000FL
6822 #define ATOM_S2_CURRENT_BL_LEVEL_MASK   0x0000FF00L
6823 #define ATOM_S2_CURRENT_BL_LEVEL_SHIFT  8
6824 
6825 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK       0x0C000000L
6826 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
6827 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE     0x10000000L
6828 
6829 #define ATOM_S2_DEVICE_DPMS_STATE       0x00010000L
6830 #define ATOM_S2_VRI_BRIGHT_ENABLE       0x20000000L
6831 
6832 #define ATOM_S2_DISPLAY_ROTATION_0_DEGREE     0x0
6833 #define ATOM_S2_DISPLAY_ROTATION_90_DEGREE    0x1
6834 #define ATOM_S2_DISPLAY_ROTATION_180_DEGREE   0x2
6835 #define ATOM_S2_DISPLAY_ROTATION_270_DEGREE   0x3
6836 #define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
6837 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK   0xC0000000L
6838 
6839 
6840 //Byte aligned defintion for BIOS usage
6841 #define ATOM_S2_TV1_STANDARD_MASKb0     0x0F
6842 #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
6843 #define ATOM_S2_DEVICE_DPMS_STATEb2     0x01
6844 
6845 #define ATOM_S2_TMDS_COHERENT_MODEb3    0x10          // used by VBIOS code only, use coherent mode for TMDS/HDMI mode
6846 #define ATOM_S2_VRI_BRIGHT_ENABLEb3     0x20
6847 #define ATOM_S2_ROTATION_STATE_MASKb3   0xC0
6848 
6849 
6850 // BIOS_3_SCRATCH Definition
6851 #define ATOM_S3_CRT1_ACTIVE             0x00000001L
6852 #define ATOM_S3_LCD1_ACTIVE             0x00000002L
6853 #define ATOM_S3_TV1_ACTIVE              0x00000004L
6854 #define ATOM_S3_DFP1_ACTIVE             0x00000008L
6855 #define ATOM_S3_CRT2_ACTIVE             0x00000010L
6856 #define ATOM_S3_LCD2_ACTIVE             0x00000020L
6857 #define ATOM_S3_DFP6_ACTIVE             0x00000040L
6858 #define ATOM_S3_DFP2_ACTIVE             0x00000080L
6859 #define ATOM_S3_CV_ACTIVE               0x00000100L
6860 #define ATOM_S3_DFP3_ACTIVE             0x00000200L
6861 #define ATOM_S3_DFP4_ACTIVE             0x00000400L
6862 #define ATOM_S3_DFP5_ACTIVE             0x00000800L
6863 
6864 
6865 #define ATOM_S3_DEVICE_ACTIVE_MASK      0x00000FFFL
6866 
6867 #define ATOM_S3_LCD_FULLEXPANSION_ACTIVE         0x00001000L
6868 #define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
6869 
6870 #define ATOM_S3_CRT1_CRTC_ACTIVE        0x00010000L
6871 #define ATOM_S3_LCD1_CRTC_ACTIVE        0x00020000L
6872 #define ATOM_S3_TV1_CRTC_ACTIVE         0x00040000L
6873 #define ATOM_S3_DFP1_CRTC_ACTIVE        0x00080000L
6874 #define ATOM_S3_CRT2_CRTC_ACTIVE        0x00100000L
6875 #define ATOM_S3_LCD2_CRTC_ACTIVE        0x00200000L
6876 #define ATOM_S3_DFP6_CRTC_ACTIVE        0x00400000L
6877 #define ATOM_S3_DFP2_CRTC_ACTIVE        0x00800000L
6878 #define ATOM_S3_CV_CRTC_ACTIVE          0x01000000L
6879 #define ATOM_S3_DFP3_CRTC_ACTIVE        0x02000000L
6880 #define ATOM_S3_DFP4_CRTC_ACTIVE        0x04000000L
6881 #define ATOM_S3_DFP5_CRTC_ACTIVE        0x08000000L
6882 
6883 
6884 #define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
6885 #define ATOM_S3_ASIC_GUI_ENGINE_HUNG    0x20000000L
6886 //Below two definitions are not supported in pplib, but in the old powerplay in DAL
6887 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH   0x40000000L
6888 #define ATOM_S3_RQST_GPU_USE_MIN_PWR    0x80000000L
6889 
6890 
6891 
6892 //Byte aligned defintion for BIOS usage
6893 #define ATOM_S3_CRT1_ACTIVEb0           0x01
6894 #define ATOM_S3_LCD1_ACTIVEb0           0x02
6895 #define ATOM_S3_TV1_ACTIVEb0            0x04
6896 #define ATOM_S3_DFP1_ACTIVEb0           0x08
6897 #define ATOM_S3_CRT2_ACTIVEb0           0x10
6898 #define ATOM_S3_LCD2_ACTIVEb0           0x20
6899 #define ATOM_S3_DFP6_ACTIVEb0           0x40
6900 #define ATOM_S3_DFP2_ACTIVEb0           0x80
6901 #define ATOM_S3_CV_ACTIVEb1             0x01
6902 #define ATOM_S3_DFP3_ACTIVEb1           0x02
6903 #define ATOM_S3_DFP4_ACTIVEb1           0x04
6904 #define ATOM_S3_DFP5_ACTIVEb1           0x08
6905 
6906 
6907 #define ATOM_S3_ACTIVE_CRTC1w0          0xFFF
6908 
6909 #define ATOM_S3_CRT1_CRTC_ACTIVEb2      0x01
6910 #define ATOM_S3_LCD1_CRTC_ACTIVEb2      0x02
6911 #define ATOM_S3_TV1_CRTC_ACTIVEb2       0x04
6912 #define ATOM_S3_DFP1_CRTC_ACTIVEb2      0x08
6913 #define ATOM_S3_CRT2_CRTC_ACTIVEb2      0x10
6914 #define ATOM_S3_LCD2_CRTC_ACTIVEb2      0x20
6915 #define ATOM_S3_DFP6_CRTC_ACTIVEb2      0x40
6916 #define ATOM_S3_DFP2_CRTC_ACTIVEb2      0x80
6917 #define ATOM_S3_CV_CRTC_ACTIVEb3        0x01
6918 #define ATOM_S3_DFP3_CRTC_ACTIVEb3      0x02
6919 #define ATOM_S3_DFP4_CRTC_ACTIVEb3      0x04
6920 #define ATOM_S3_DFP5_CRTC_ACTIVEb3      0x08
6921 
6922 
6923 #define ATOM_S3_ACTIVE_CRTC2w1          0xFFF
6924 
6925 
6926 // BIOS_4_SCRATCH Definition
6927 #define ATOM_S4_LCD1_PANEL_ID_MASK      0x000000FFL
6928 #define ATOM_S4_LCD1_REFRESH_MASK       0x0000FF00L
6929 #define ATOM_S4_LCD1_REFRESH_SHIFT      8
6930 
6931 //Byte aligned defintion for BIOS usage
6932 #define ATOM_S4_LCD1_PANEL_ID_MASKb0    0x0FF
6933 #define ATOM_S4_LCD1_REFRESH_MASKb1     ATOM_S4_LCD1_PANEL_ID_MASKb0
6934 #define ATOM_S4_VRAM_INFO_MASKb2        ATOM_S4_LCD1_PANEL_ID_MASKb0
6935 
6936 // BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!!
6937 #define ATOM_S5_DOS_REQ_CRT1b0          0x01
6938 #define ATOM_S5_DOS_REQ_LCD1b0          0x02
6939 #define ATOM_S5_DOS_REQ_TV1b0           0x04
6940 #define ATOM_S5_DOS_REQ_DFP1b0          0x08
6941 #define ATOM_S5_DOS_REQ_CRT2b0          0x10
6942 #define ATOM_S5_DOS_REQ_LCD2b0          0x20
6943 #define ATOM_S5_DOS_REQ_DFP6b0          0x40
6944 #define ATOM_S5_DOS_REQ_DFP2b0          0x80
6945 #define ATOM_S5_DOS_REQ_CVb1            0x01
6946 #define ATOM_S5_DOS_REQ_DFP3b1          0x02
6947 #define ATOM_S5_DOS_REQ_DFP4b1          0x04
6948 #define ATOM_S5_DOS_REQ_DFP5b1          0x08
6949 
6950 
6951 #define ATOM_S5_DOS_REQ_DEVICEw0        0x0FFF
6952 
6953 #define ATOM_S5_DOS_REQ_CRT1            0x0001
6954 #define ATOM_S5_DOS_REQ_LCD1            0x0002
6955 #define ATOM_S5_DOS_REQ_TV1             0x0004
6956 #define ATOM_S5_DOS_REQ_DFP1            0x0008
6957 #define ATOM_S5_DOS_REQ_CRT2            0x0010
6958 #define ATOM_S5_DOS_REQ_LCD2            0x0020
6959 #define ATOM_S5_DOS_REQ_DFP6            0x0040
6960 #define ATOM_S5_DOS_REQ_DFP2            0x0080
6961 #define ATOM_S5_DOS_REQ_CV              0x0100
6962 #define ATOM_S5_DOS_REQ_DFP3            0x0200
6963 #define ATOM_S5_DOS_REQ_DFP4            0x0400
6964 #define ATOM_S5_DOS_REQ_DFP5            0x0800
6965 
6966 #define ATOM_S5_DOS_FORCE_CRT1b2        ATOM_S5_DOS_REQ_CRT1b0
6967 #define ATOM_S5_DOS_FORCE_TV1b2         ATOM_S5_DOS_REQ_TV1b0
6968 #define ATOM_S5_DOS_FORCE_CRT2b2        ATOM_S5_DOS_REQ_CRT2b0
6969 #define ATOM_S5_DOS_FORCE_CVb3          ATOM_S5_DOS_REQ_CVb1
6970 #define ATOM_S5_DOS_FORCE_DEVICEw1      (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\
6971                                         (ATOM_S5_DOS_FORCE_CVb3<<8))
6972 // BIOS_6_SCRATCH Definition
6973 #define ATOM_S6_DEVICE_CHANGE           0x00000001L
6974 #define ATOM_S6_SCALER_CHANGE           0x00000002L
6975 #define ATOM_S6_LID_CHANGE              0x00000004L
6976 #define ATOM_S6_DOCKING_CHANGE          0x00000008L
6977 #define ATOM_S6_ACC_MODE                0x00000010L
6978 #define ATOM_S6_EXT_DESKTOP_MODE        0x00000020L
6979 #define ATOM_S6_LID_STATE               0x00000040L
6980 #define ATOM_S6_DOCK_STATE              0x00000080L
6981 #define ATOM_S6_CRITICAL_STATE          0x00000100L
6982 #define ATOM_S6_HW_I2C_BUSY_STATE       0x00000200L
6983 #define ATOM_S6_THERMAL_STATE_CHANGE    0x00000400L
6984 #define ATOM_S6_INTERRUPT_SET_BY_BIOS   0x00000800L
6985 #define ATOM_S6_REQ_LCD_EXPANSION_FULL         0x00001000L //Normal expansion Request bit for LCD
6986 #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO  0x00002000L //Aspect ratio expansion Request bit for LCD
6987 
6988 #define ATOM_S6_DISPLAY_STATE_CHANGE    0x00004000L        //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion
6989 #define ATOM_S6_I2C_STATE_CHANGE        0x00008000L        //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion
6990 
6991 #define ATOM_S6_ACC_REQ_CRT1            0x00010000L
6992 #define ATOM_S6_ACC_REQ_LCD1            0x00020000L
6993 #define ATOM_S6_ACC_REQ_TV1             0x00040000L
6994 #define ATOM_S6_ACC_REQ_DFP1            0x00080000L
6995 #define ATOM_S6_ACC_REQ_CRT2            0x00100000L
6996 #define ATOM_S6_ACC_REQ_LCD2            0x00200000L
6997 #define ATOM_S6_ACC_REQ_DFP6            0x00400000L
6998 #define ATOM_S6_ACC_REQ_DFP2            0x00800000L
6999 #define ATOM_S6_ACC_REQ_CV              0x01000000L
7000 #define ATOM_S6_ACC_REQ_DFP3                  0x02000000L
7001 #define ATOM_S6_ACC_REQ_DFP4                  0x04000000L
7002 #define ATOM_S6_ACC_REQ_DFP5                  0x08000000L
7003 
7004 #define ATOM_S6_ACC_REQ_MASK                0x0FFF0000L
7005 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE    0x10000000L
7006 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH    0x20000000L
7007 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE       0x40000000L
7008 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK  0x80000000L
7009 
7010 //Byte aligned defintion for BIOS usage
7011 #define ATOM_S6_DEVICE_CHANGEb0         0x01
7012 #define ATOM_S6_SCALER_CHANGEb0         0x02
7013 #define ATOM_S6_LID_CHANGEb0            0x04
7014 #define ATOM_S6_DOCKING_CHANGEb0        0x08
7015 #define ATOM_S6_ACC_MODEb0              0x10
7016 #define ATOM_S6_EXT_DESKTOP_MODEb0      0x20
7017 #define ATOM_S6_LID_STATEb0             0x40
7018 #define ATOM_S6_DOCK_STATEb0            0x80
7019 #define ATOM_S6_CRITICAL_STATEb1        0x01
7020 #define ATOM_S6_HW_I2C_BUSY_STATEb1     0x02
7021 #define ATOM_S6_THERMAL_STATE_CHANGEb1  0x04
7022 #define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
7023 #define ATOM_S6_REQ_LCD_EXPANSION_FULLb1        0x10
7024 #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
7025 
7026 #define ATOM_S6_ACC_REQ_CRT1b2          0x01
7027 #define ATOM_S6_ACC_REQ_LCD1b2          0x02
7028 #define ATOM_S6_ACC_REQ_TV1b2           0x04
7029 #define ATOM_S6_ACC_REQ_DFP1b2          0x08
7030 #define ATOM_S6_ACC_REQ_CRT2b2          0x10
7031 #define ATOM_S6_ACC_REQ_LCD2b2          0x20
7032 #define ATOM_S6_ACC_REQ_DFP6b2          0x40
7033 #define ATOM_S6_ACC_REQ_DFP2b2          0x80
7034 #define ATOM_S6_ACC_REQ_CVb3            0x01
7035 #define ATOM_S6_ACC_REQ_DFP3b3          0x02
7036 #define ATOM_S6_ACC_REQ_DFP4b3          0x04
7037 #define ATOM_S6_ACC_REQ_DFP5b3          0x08
7038 
7039 #define ATOM_S6_ACC_REQ_DEVICEw1        ATOM_S5_DOS_REQ_DEVICEw0
7040 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
7041 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
7042 #define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3    0x40
7043 #define ATOM_S6_CONFIG_DISPLAY_CHANGEb3    0x80
7044 
7045 #define ATOM_S6_DEVICE_CHANGE_SHIFT             0
7046 #define ATOM_S6_SCALER_CHANGE_SHIFT             1
7047 #define ATOM_S6_LID_CHANGE_SHIFT                2
7048 #define ATOM_S6_DOCKING_CHANGE_SHIFT            3
7049 #define ATOM_S6_ACC_MODE_SHIFT                  4
7050 #define ATOM_S6_EXT_DESKTOP_MODE_SHIFT          5
7051 #define ATOM_S6_LID_STATE_SHIFT                 6
7052 #define ATOM_S6_DOCK_STATE_SHIFT                7
7053 #define ATOM_S6_CRITICAL_STATE_SHIFT            8
7054 #define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT         9
7055 #define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT      10
7056 #define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT     11
7057 #define ATOM_S6_REQ_SCALER_SHIFT                12
7058 #define ATOM_S6_REQ_SCALER_ARATIO_SHIFT         13
7059 #define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT      14
7060 #define ATOM_S6_I2C_STATE_CHANGE_SHIFT          15
7061 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT  28
7062 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT  29
7063 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT     30
7064 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT     31
7065 
7066 // BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!!
7067 #define ATOM_S7_DOS_MODE_TYPEb0             0x03
7068 #define ATOM_S7_DOS_MODE_VGAb0              0x00
7069 #define ATOM_S7_DOS_MODE_VESAb0             0x01
7070 #define ATOM_S7_DOS_MODE_EXTb0              0x02
7071 #define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0      0x0C
7072 #define ATOM_S7_DOS_MODE_PIXEL_FORMATb0     0xF0
7073 #define ATOM_S7_DOS_8BIT_DAC_ENb1           0x01
7074 #define ATOM_S7_ASIC_INIT_COMPLETEb1        0x02
7075 #define ATOM_S7_ASIC_INIT_COMPLETE_MASK     0x00000200
7076 #define ATOM_S7_DOS_MODE_NUMBERw1           0x0FFFF
7077 
7078 #define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT       8
7079 
7080 // BIOS_8_SCRATCH Definition
7081 #define ATOM_S8_I2C_CHANNEL_BUSY_MASK       0x00000FFFF
7082 #define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK     0x0FFFF0000
7083 
7084 #define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT      0
7085 #define ATOM_S8_I2C_ENGINE_BUSY_SHIFT       16
7086 
7087 // BIOS_9_SCRATCH Definition
7088 #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
7089 #define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK  0x0000FFFF
7090 #endif
7091 #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
7092 #define ATOM_S9_I2C_CHANNEL_ABORTED_MASK    0xFFFF0000
7093 #endif
7094 #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
7095 #define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
7096 #endif
7097 #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
7098 #define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT   16
7099 #endif
7100 
7101 
7102 #define ATOM_FLAG_SET                         0x20
7103 #define ATOM_FLAG_CLEAR                       0
7104 #define CLEAR_ATOM_S6_ACC_MODE                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
7105 #define SET_ATOM_S6_DEVICE_CHANGE             ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
7106 #define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE     ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
7107 #define SET_ATOM_S6_SCALER_CHANGE             ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
7108 #define SET_ATOM_S6_LID_CHANGE                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
7109 
7110 #define SET_ATOM_S6_LID_STATE                 ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
7111 #define CLEAR_ATOM_S6_LID_STATE               ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
7112 
7113 #define SET_ATOM_S6_DOCK_CHANGE                   ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
7114 #define SET_ATOM_S6_DOCK_STATE                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
7115 #define CLEAR_ATOM_S6_DOCK_STATE              ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
7116 
7117 #define SET_ATOM_S6_THERMAL_STATE_CHANGE      ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
7118 #define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE  ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
7119 #define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS     ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
7120 
7121 #define SET_ATOM_S6_CRITICAL_STATE            ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
7122 #define CLEAR_ATOM_S6_CRITICAL_STATE          ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
7123 
7124 #define SET_ATOM_S6_REQ_SCALER                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
7125 #define CLEAR_ATOM_S6_REQ_SCALER              ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
7126 
7127 #define SET_ATOM_S6_REQ_SCALER_ARATIO         ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
7128 #define CLEAR_ATOM_S6_REQ_SCALER_ARATIO       ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
7129 
7130 #define SET_ATOM_S6_I2C_STATE_CHANGE          ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
7131 
7132 #define SET_ATOM_S6_DISPLAY_STATE_CHANGE      ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
7133 
7134 #define SET_ATOM_S6_DEVICE_RECONFIG           ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
7135 #define CLEAR_ATOM_S0_LCD1                    ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )|  ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
7136 #define SET_ATOM_S7_DOS_8BIT_DAC_EN           ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
7137 #define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN         ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
7138 
7139 /****************************************************************************/
7140 //Portion II: Definitinos only used in Driver
7141 /****************************************************************************/
7142 
7143 // Macros used by driver
7144 
7145 #ifdef __cplusplus
7146 #define GetIndexIntoMasterTable(MasterOrData, FieldName) ((reinterpret_cast<char*>(&(static_cast<ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*>(0))->FieldName)-static_cast<char*>(0))/sizeof(USHORT))
7147 
7148 #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableFormatRevision )&0x3F)
7149 #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET)  (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableContentRevision)&0x3F)
7150 #else // not __cplusplus
7151 #define   GetIndexIntoMasterTable(MasterOrData, FieldName) (offsetof(ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES, FieldName) / sizeof(USHORT))
7152 
7153 #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
7154 #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET)  ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
7155 #endif // __cplusplus
7156 
7157 #define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
7158 #define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
7159 
7160 /****************************************************************************/
7161 //Portion III: Definitinos only used in VBIOS
7162 /****************************************************************************/
7163 #define ATOM_DAC_SRC               0x80
7164 #define ATOM_SRC_DAC1               0
7165 #define ATOM_SRC_DAC2               0x80
7166 
7167 
7168 
7169 typedef struct _MEMORY_PLLINIT_PARAMETERS
7170 {
7171   ULONG ulTargetMemoryClock; //In 10Khz unit
7172   UCHAR   ucAction;                //not define yet
7173   UCHAR   ucFbDiv_Hi;             //Fbdiv Hi byte
7174   UCHAR   ucFbDiv;                //FB value
7175   UCHAR   ucPostDiv;             //Post div
7176 }MEMORY_PLLINIT_PARAMETERS;
7177 
7178 #define MEMORY_PLLINIT_PS_ALLOCATION  MEMORY_PLLINIT_PARAMETERS
7179 
7180 
7181 #define   GPIO_PIN_WRITE                                       0x01
7182 #define   GPIO_PIN_READ                                          0x00
7183 
7184 typedef struct  _GPIO_PIN_CONTROL_PARAMETERS
7185 {
7186   UCHAR ucGPIO_ID;           //return value, read from GPIO pins
7187   UCHAR ucGPIOBitShift;        //define which bit in uGPIOBitVal need to be update
7188    UCHAR ucGPIOBitVal;           //Set/Reset corresponding bit defined in ucGPIOBitMask
7189   UCHAR ucAction;                 //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write
7190 }GPIO_PIN_CONTROL_PARAMETERS;
7191 
7192 typedef struct _ENABLE_SCALER_PARAMETERS
7193 {
7194   UCHAR ucScaler;            // ATOM_SCALER1, ATOM_SCALER2
7195   UCHAR ucEnable;            // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION
7196   UCHAR ucTVStandard;        //
7197   UCHAR ucPadding[1];
7198 }ENABLE_SCALER_PARAMETERS;
7199 #define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
7200 
7201 //ucEnable:
7202 #define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION    0
7203 #define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION  1
7204 #define SCALER_ENABLE_2TAP_ALPHA_MODE               2
7205 #define SCALER_ENABLE_MULTITAP_MODE                 3
7206 
7207 typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS
7208 {
7209   ULONG  usHWIconHorzVertPosn;        // Hardware Icon Vertical position
7210   UCHAR  ucHWIconVertOffset;          // Hardware Icon Vertical offset
7211   UCHAR  ucHWIconHorzOffset;          // Hardware Icon Horizontal offset
7212   UCHAR  ucSelection;                 // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2
7213   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
7214 }ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;
7215 
7216 typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION
7217 {
7218   ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS  sEnableIcon;
7219   ENABLE_CRTC_PARAMETERS                  sReserved;
7220 }ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;
7221 
7222 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS
7223 {
7224   USHORT usHight;                     // Image Hight
7225   USHORT usWidth;                     // Image Width
7226   UCHAR  ucSurface;                   // Surface 1 or 2
7227   UCHAR  ucPadding[3];
7228 }ENABLE_GRAPH_SURFACE_PARAMETERS;
7229 
7230 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2
7231 {
7232   USHORT usHight;                     // Image Hight
7233   USHORT usWidth;                     // Image Width
7234   UCHAR  ucSurface;                   // Surface 1 or 2
7235   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
7236   UCHAR  ucPadding[2];
7237 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;
7238 
7239 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
7240 {
7241   USHORT usHight;                     // Image Hight
7242   USHORT usWidth;                     // Image Width
7243   UCHAR  ucSurface;                   // Surface 1 or 2
7244   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
7245   USHORT usDeviceId;                  // Active Device Id for this surface. If no device, set to 0.
7246 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3;
7247 
7248 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4
7249 {
7250   USHORT usHight;                     // Image Hight
7251   USHORT usWidth;                     // Image Width
7252   USHORT usGraphPitch;
7253   UCHAR  ucColorDepth;
7254   UCHAR  ucPixelFormat;
7255   UCHAR  ucSurface;                   // Surface 1 or 2
7256   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
7257   UCHAR  ucModeType;
7258   UCHAR  ucReserved;
7259 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4;
7260 
7261 // ucEnable
7262 #define ATOM_GRAPH_CONTROL_SET_PITCH             0x0f
7263 #define ATOM_GRAPH_CONTROL_SET_DISP_START        0x10
7264 
7265 typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
7266 {
7267   ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
7268   ENABLE_YUV_PS_ALLOCATION        sReserved; // Don't set this one
7269 }ENABLE_GRAPH_SURFACE_PS_ALLOCATION;
7270 
7271 typedef struct _MEMORY_CLEAN_UP_PARAMETERS
7272 {
7273   USHORT  usMemoryStart;                //in 8Kb boundry, offset from memory base address
7274   USHORT  usMemorySize;                 //8Kb blocks aligned
7275 }MEMORY_CLEAN_UP_PARAMETERS;
7276 
7277 #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
7278 
7279 typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
7280 {
7281   USHORT  usX_Size;                     //When use as input parameter, usX_Size indicates which CRTC
7282   USHORT  usY_Size;
7283 }GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
7284 
7285 typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2
7286 {
7287   union{
7288     USHORT  usX_Size;                     //When use as input parameter, usX_Size indicates which CRTC
7289     USHORT  usSurface;
7290   };
7291   USHORT usY_Size;
7292   USHORT usDispXStart;
7293   USHORT usDispYStart;
7294 }GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2;
7295 
7296 
7297 typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3
7298 {
7299   UCHAR  ucLutId;
7300   UCHAR  ucAction;
7301   USHORT usLutStartIndex;
7302   USHORT usLutLength;
7303   USHORT usLutOffsetInVram;
7304 }PALETTE_DATA_CONTROL_PARAMETERS_V3;
7305 
7306 // ucAction:
7307 #define PALETTE_DATA_AUTO_FILL            1
7308 #define PALETTE_DATA_READ                 2
7309 #define PALETTE_DATA_WRITE                3
7310 
7311 
7312 typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2
7313 {
7314   UCHAR  ucInterruptId;
7315   UCHAR  ucServiceId;
7316   UCHAR  ucStatus;
7317   UCHAR  ucReserved;
7318 }INTERRUPT_SERVICE_PARAMETER_V2;
7319 
7320 // ucInterruptId
7321 #define HDP1_INTERRUPT_ID                 1
7322 #define HDP2_INTERRUPT_ID                 2
7323 #define HDP3_INTERRUPT_ID                 3
7324 #define HDP4_INTERRUPT_ID                 4
7325 #define HDP5_INTERRUPT_ID                 5
7326 #define HDP6_INTERRUPT_ID                 6
7327 #define SW_INTERRUPT_ID                   11
7328 
7329 // ucAction
7330 #define INTERRUPT_SERVICE_GEN_SW_INT      1
7331 #define INTERRUPT_SERVICE_GET_STATUS      2
7332 
7333  // ucStatus
7334 #define INTERRUPT_STATUS__INT_TRIGGER     1
7335 #define INTERRUPT_STATUS__HPD_HIGH        2
7336 
7337 typedef struct _EFUSE_INPUT_PARAMETER
7338 {
7339   USHORT usEfuseIndex;
7340   UCHAR  ucBitShift;
7341   UCHAR  ucBitLength;
7342 }EFUSE_INPUT_PARAMETER;
7343 
7344 // ReadEfuseValue command table input/output parameter
7345 typedef union _READ_EFUSE_VALUE_PARAMETER
7346 {
7347   EFUSE_INPUT_PARAMETER sEfuse;
7348   ULONG                 ulEfuseValue;
7349 }READ_EFUSE_VALUE_PARAMETER;
7350 
7351 typedef struct _INDIRECT_IO_ACCESS
7352 {
7353   ATOM_COMMON_TABLE_HEADER sHeader;
7354   UCHAR                    IOAccessSequence[256];
7355 } INDIRECT_IO_ACCESS;
7356 
7357 #define INDIRECT_READ              0x00
7358 #define INDIRECT_WRITE             0x80
7359 
7360 #define INDIRECT_IO_MM             0
7361 #define INDIRECT_IO_PLL            1
7362 #define INDIRECT_IO_MC             2
7363 #define INDIRECT_IO_PCIE           3
7364 #define INDIRECT_IO_PCIEP          4
7365 #define INDIRECT_IO_NBMISC         5
7366 #define INDIRECT_IO_SMU            5
7367 
7368 #define INDIRECT_IO_PLL_READ       INDIRECT_IO_PLL   | INDIRECT_READ
7369 #define INDIRECT_IO_PLL_WRITE      INDIRECT_IO_PLL   | INDIRECT_WRITE
7370 #define INDIRECT_IO_MC_READ        INDIRECT_IO_MC    | INDIRECT_READ
7371 #define INDIRECT_IO_MC_WRITE       INDIRECT_IO_MC    | INDIRECT_WRITE
7372 #define INDIRECT_IO_PCIE_READ      INDIRECT_IO_PCIE  | INDIRECT_READ
7373 #define INDIRECT_IO_PCIE_WRITE     INDIRECT_IO_PCIE  | INDIRECT_WRITE
7374 #define INDIRECT_IO_PCIEP_READ     INDIRECT_IO_PCIEP | INDIRECT_READ
7375 #define INDIRECT_IO_PCIEP_WRITE    INDIRECT_IO_PCIEP | INDIRECT_WRITE
7376 #define INDIRECT_IO_NBMISC_READ    INDIRECT_IO_NBMISC | INDIRECT_READ
7377 #define INDIRECT_IO_NBMISC_WRITE   INDIRECT_IO_NBMISC | INDIRECT_WRITE
7378 #define INDIRECT_IO_SMU_READ       INDIRECT_IO_SMU | INDIRECT_READ
7379 #define INDIRECT_IO_SMU_WRITE      INDIRECT_IO_SMU | INDIRECT_WRITE
7380 
7381 
7382 typedef struct _ATOM_OEM_INFO
7383 {
7384   ATOM_COMMON_TABLE_HEADER   sHeader;
7385   ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
7386 }ATOM_OEM_INFO;
7387 
7388 typedef struct _ATOM_TV_MODE
7389 {
7390    UCHAR   ucVMode_Num;           //Video mode number
7391    UCHAR   ucTV_Mode_Num;         //Internal TV mode number
7392 }ATOM_TV_MODE;
7393 
7394 typedef struct _ATOM_BIOS_INT_TVSTD_MODE
7395 {
7396   ATOM_COMMON_TABLE_HEADER sHeader;
7397    USHORT   usTV_Mode_LUT_Offset;   // Pointer to standard to internal number conversion table
7398    USHORT   usTV_FIFO_Offset;        // Pointer to FIFO entry table
7399    USHORT   usNTSC_Tbl_Offset;      // Pointer to SDTV_Mode_NTSC table
7400    USHORT   usPAL_Tbl_Offset;        // Pointer to SDTV_Mode_PAL table
7401    USHORT   usCV_Tbl_Offset;        // Pointer to SDTV_Mode_PAL table
7402 }ATOM_BIOS_INT_TVSTD_MODE;
7403 
7404 
7405 typedef struct _ATOM_TV_MODE_SCALER_PTR
7406 {
7407    USHORT   ucFilter0_Offset;      //Pointer to filter format 0 coefficients
7408    USHORT   usFilter1_Offset;      //Pointer to filter format 0 coefficients
7409    UCHAR   ucTV_Mode_Num;
7410 }ATOM_TV_MODE_SCALER_PTR;
7411 
7412 typedef struct _ATOM_STANDARD_VESA_TIMING
7413 {
7414   ATOM_COMMON_TABLE_HEADER sHeader;
7415   ATOM_DTD_FORMAT              aModeTimings[16];      // 16 is not the real array number, just for initial allocation
7416 }ATOM_STANDARD_VESA_TIMING;
7417 
7418 
7419 typedef struct _ATOM_STD_FORMAT
7420 {
7421   USHORT    usSTD_HDisp;
7422   USHORT    usSTD_VDisp;
7423   USHORT    usSTD_RefreshRate;
7424   USHORT    usReserved;
7425 }ATOM_STD_FORMAT;
7426 
7427 typedef struct _ATOM_VESA_TO_EXTENDED_MODE
7428 {
7429   USHORT  usVESA_ModeNumber;
7430   USHORT  usExtendedModeNumber;
7431 }ATOM_VESA_TO_EXTENDED_MODE;
7432 
7433 typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT
7434 {
7435   ATOM_COMMON_TABLE_HEADER   sHeader;
7436   ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
7437 }ATOM_VESA_TO_INTENAL_MODE_LUT;
7438 
7439 /*************** ATOM Memory Related Data Structure ***********************/
7440 typedef struct _ATOM_MEMORY_VENDOR_BLOCK{
7441    UCHAR                                    ucMemoryType;
7442    UCHAR                                    ucMemoryVendor;
7443    UCHAR                                    ucAdjMCId;
7444    UCHAR                                    ucDynClkId;
7445    ULONG                                    ulDllResetClkRange;
7446 }ATOM_MEMORY_VENDOR_BLOCK;
7447 
7448 
7449 typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG{
7450 #if ATOM_BIG_ENDIAN
7451 	ULONG												ucMemBlkId:8;
7452 	ULONG												ulMemClockRange:24;
7453 #else
7454 	ULONG												ulMemClockRange:24;
7455 	ULONG												ucMemBlkId:8;
7456 #endif
7457 }ATOM_MEMORY_SETTING_ID_CONFIG;
7458 
7459 typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS
7460 {
7461   ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
7462   ULONG                         ulAccess;
7463 }ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;
7464 
7465 
7466 typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK{
7467    ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS  ulMemoryID;
7468    ULONG                                 aulMemData[1];
7469 }ATOM_MEMORY_SETTING_DATA_BLOCK;
7470 
7471 
7472 typedef struct _ATOM_INIT_REG_INDEX_FORMAT{
7473     USHORT usRegIndex;                                     // MC register index
7474     UCHAR  ucPreRegDataLength;                             // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf
7475 }ATOM_INIT_REG_INDEX_FORMAT;
7476 
7477 
7478 typedef struct _ATOM_INIT_REG_BLOCK{
7479    USHORT                           usRegIndexTblSize;          //size of asRegIndexBuf
7480    USHORT                           usRegDataBlkSize;           //size of ATOM_MEMORY_SETTING_DATA_BLOCK
7481    ATOM_INIT_REG_INDEX_FORMAT       asRegIndexBuf[1];
7482    ATOM_MEMORY_SETTING_DATA_BLOCK   asRegDataBuf[1];
7483 }ATOM_INIT_REG_BLOCK;
7484 
7485 #define END_OF_REG_INDEX_BLOCK  0x0ffff
7486 #define END_OF_REG_DATA_BLOCK   0x00000000
7487 #define ATOM_INIT_REG_MASK_FLAG 0x80               //Not used in BIOS
7488 #define CLOCK_RANGE_HIGHEST     0x00ffffff
7489 
7490 #define VALUE_DWORD             SIZEOF ULONG
7491 #define VALUE_SAME_AS_ABOVE     0
7492 #define VALUE_MASK_DWORD        0x84
7493 
7494 #define INDEX_ACCESS_RANGE_BEGIN       (VALUE_DWORD + 1)
7495 #define INDEX_ACCESS_RANGE_END          (INDEX_ACCESS_RANGE_BEGIN + 1)
7496 #define VALUE_INDEX_ACCESS_SINGLE       (INDEX_ACCESS_RANGE_END + 1)
7497 //#define ACCESS_MCIODEBUGIND            0x40       //defined in BIOS code
7498 #define ACCESS_PLACEHOLDER             0x80
7499 
7500 
7501 typedef struct _ATOM_MC_INIT_PARAM_TABLE
7502 {
7503   ATOM_COMMON_TABLE_HEADER      sHeader;
7504   USHORT                        usAdjustARB_SEQDataOffset;
7505   USHORT                        usMCInitMemTypeTblOffset;
7506   USHORT                        usMCInitCommonTblOffset;
7507   USHORT                        usMCInitPowerDownTblOffset;
7508   ULONG                         ulARB_SEQDataBuf[32];
7509   ATOM_INIT_REG_BLOCK           asMCInitMemType;
7510   ATOM_INIT_REG_BLOCK           asMCInitCommon;
7511 }ATOM_MC_INIT_PARAM_TABLE;
7512 
7513 
7514 typedef struct _ATOM_REG_INIT_SETTING
7515 {
7516   USHORT  usRegIndex;
7517   ULONG   ulRegValue;
7518 }ATOM_REG_INIT_SETTING;
7519 
7520 typedef struct _ATOM_MC_INIT_PARAM_TABLE_V2_1
7521 {
7522   ATOM_COMMON_TABLE_HEADER      sHeader;
7523   ULONG                         ulMCUcodeVersion;
7524   ULONG                         ulMCUcodeRomStartAddr;
7525   ULONG                         ulMCUcodeLength;
7526   USHORT                        usMcRegInitTableOffset;     // offset of ATOM_REG_INIT_SETTING array for MC core register settings.
7527   USHORT                        usReserved;                 // offset of ATOM_INIT_REG_BLOCK for MC SEQ/PHY register setting
7528 }ATOM_MC_INIT_PARAM_TABLE_V2_1;
7529 
7530 
7531 #define _4Mx16              0x2
7532 #define _4Mx32              0x3
7533 #define _8Mx16              0x12
7534 #define _8Mx32              0x13
7535 #define _8Mx128             0x15
7536 #define _16Mx16             0x22
7537 #define _16Mx32             0x23
7538 #define _16Mx128            0x25
7539 #define _32Mx16             0x32
7540 #define _32Mx32             0x33
7541 #define _32Mx128            0x35
7542 #define _64Mx8              0x41
7543 #define _64Mx16             0x42
7544 #define _64Mx32             0x43
7545 #define _64Mx128            0x45
7546 #define _128Mx8             0x51
7547 #define _128Mx16            0x52
7548 #define _128Mx32            0x53
7549 #define _256Mx8             0x61
7550 #define _256Mx16            0x62
7551 #define _256Mx32            0x63
7552 #define _512Mx8             0x71
7553 #define _512Mx16            0x72
7554 
7555 
7556 #define SAMSUNG             0x1
7557 #define INFINEON            0x2
7558 #define ELPIDA              0x3
7559 #define ETRON               0x4
7560 #define NANYA               0x5
7561 #define HYNIX               0x6
7562 #define MOSEL               0x7
7563 #define WINBOND             0x8
7564 #define ESMT                0x9
7565 #define MICRON              0xF
7566 
7567 #define QIMONDA             INFINEON
7568 #define PROMOS              MOSEL
7569 #define KRETON              INFINEON
7570 #define ELIXIR              NANYA
7571 #define MEZZA               ELPIDA
7572 
7573 
7574 /////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
7575 
7576 #define UCODE_ROM_START_ADDRESS      0x1b800
7577 #define   UCODE_SIGNATURE         0x4375434d // 'MCuC' - MC uCode
7578 
7579 //uCode block header for reference
7580 
7581 typedef struct _MCuCodeHeader
7582 {
7583   ULONG  ulSignature;
7584   UCHAR  ucRevision;
7585   UCHAR  ucChecksum;
7586   UCHAR  ucReserved1;
7587   UCHAR  ucReserved2;
7588   USHORT usParametersLength;
7589   USHORT usUCodeLength;
7590   USHORT usReserved1;
7591   USHORT usReserved2;
7592 } MCuCodeHeader;
7593 
7594 //////////////////////////////////////////////////////////////////////////////////
7595 
7596 #define ATOM_MAX_NUMBER_OF_VRAM_MODULE   16
7597 
7598 #define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK   0xF
7599 typedef struct _ATOM_VRAM_MODULE_V1
7600 {
7601   ULONG                      ulReserved;
7602   USHORT                     usEMRSValue;
7603   USHORT                     usMRSValue;
7604   USHORT                     usReserved;
7605   UCHAR                      ucExtMemoryID;     // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
7606   UCHAR                      ucMemoryType;      // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved;
7607   UCHAR                      ucMemoryVenderID;  // Predefined,never change across designs or memory type/vender
7608   UCHAR                      ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
7609   UCHAR                      ucRow;             // Number of Row,in power of 2;
7610   UCHAR                      ucColumn;          // Number of Column,in power of 2;
7611   UCHAR                      ucBank;            // Nunber of Bank;
7612   UCHAR                      ucRank;            // Number of Rank, in power of 2
7613   UCHAR                      ucChannelNum;      // Number of channel;
7614   UCHAR                      ucChannelConfig;   // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
7615   UCHAR                      ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
7616   UCHAR                      ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
7617   UCHAR                      ucReserved[2];
7618 }ATOM_VRAM_MODULE_V1;
7619 
7620 
7621 typedef struct _ATOM_VRAM_MODULE_V2
7622 {
7623   ULONG                      ulReserved;
7624   ULONG                      ulFlags;              // To enable/disable functionalities based on memory type
7625   ULONG                      ulEngineClock;     // Override of default engine clock for particular memory type
7626   ULONG                      ulMemoryClock;     // Override of default memory clock for particular memory type
7627   USHORT                     usEMRS2Value;      // EMRS2 Value is used for GDDR2 and GDDR4 memory type
7628   USHORT                     usEMRS3Value;      // EMRS3 Value is used for GDDR2 and GDDR4 memory type
7629   USHORT                     usEMRSValue;
7630   USHORT                     usMRSValue;
7631   USHORT                     usReserved;
7632   UCHAR                      ucExtMemoryID;     // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
7633   UCHAR                      ucMemoryType;      // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
7634   UCHAR                      ucMemoryVenderID;  // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
7635   UCHAR                      ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
7636   UCHAR                      ucRow;             // Number of Row,in power of 2;
7637   UCHAR                      ucColumn;          // Number of Column,in power of 2;
7638   UCHAR                      ucBank;            // Nunber of Bank;
7639   UCHAR                      ucRank;            // Number of Rank, in power of 2
7640   UCHAR                      ucChannelNum;      // Number of channel;
7641   UCHAR                      ucChannelConfig;   // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
7642   UCHAR                      ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
7643   UCHAR                      ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
7644   UCHAR                      ucRefreshRateFactor;
7645   UCHAR                      ucReserved[3];
7646 }ATOM_VRAM_MODULE_V2;
7647 
7648 
7649 typedef   struct _ATOM_MEMORY_TIMING_FORMAT
7650 {
7651    ULONG                     ulClkRange;            // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
7652   union{
7653     USHORT                   usMRS;                 // mode register
7654     USHORT                   usDDR3_MR0;
7655   };
7656   union{
7657     USHORT                   usEMRS;                  // extended mode register
7658     USHORT                   usDDR3_MR1;
7659   };
7660    UCHAR                     ucCL;                    // CAS latency
7661    UCHAR                     ucWL;                    // WRITE Latency
7662    UCHAR                     uctRAS;                  // tRAS
7663    UCHAR                     uctRC;                   // tRC
7664    UCHAR                     uctRFC;                  // tRFC
7665    UCHAR                     uctRCDR;                 // tRCDR
7666    UCHAR                     uctRCDW;                 // tRCDW
7667    UCHAR                     uctRP;                   // tRP
7668    UCHAR                     uctRRD;                  // tRRD
7669    UCHAR                     uctWR;                   // tWR
7670    UCHAR                     uctWTR;                  // tWTR
7671    UCHAR                     uctPDIX;                 // tPDIX
7672    UCHAR                     uctFAW;                  // tFAW
7673    UCHAR                     uctAOND;                 // tAOND
7674   union
7675   {
7676     struct {
7677        UCHAR                                  ucflag;                  // flag to control memory timing calculation. bit0= control EMRS2 Infineon
7678        UCHAR                                  ucReserved;
7679     };
7680     USHORT                   usDDR3_MR2;
7681   };
7682 }ATOM_MEMORY_TIMING_FORMAT;
7683 
7684 
7685 typedef   struct _ATOM_MEMORY_TIMING_FORMAT_V1
7686 {
7687    ULONG                      ulClkRange;            // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
7688    USHORT                     usMRS;                 // mode register
7689    USHORT                     usEMRS;                // extended mode register
7690    UCHAR                      ucCL;                  // CAS latency
7691    UCHAR                      ucWL;                  // WRITE Latency
7692    UCHAR                      uctRAS;                // tRAS
7693    UCHAR                      uctRC;                 // tRC
7694    UCHAR                      uctRFC;                // tRFC
7695    UCHAR                      uctRCDR;               // tRCDR
7696    UCHAR                      uctRCDW;               // tRCDW
7697    UCHAR                      uctRP;                 // tRP
7698    UCHAR                      uctRRD;                // tRRD
7699    UCHAR                      uctWR;                 // tWR
7700    UCHAR                      uctWTR;                // tWTR
7701    UCHAR                      uctPDIX;               // tPDIX
7702    UCHAR                      uctFAW;                // tFAW
7703    UCHAR                      uctAOND;               // tAOND
7704    UCHAR                      ucflag;                // flag to control memory timing calculation. bit0= control EMRS2 Infineon
7705 ////////////////////////////////////GDDR parameters///////////////////////////////////
7706    UCHAR                      uctCCDL;               //
7707    UCHAR                      uctCRCRL;              //
7708    UCHAR                      uctCRCWL;              //
7709    UCHAR                      uctCKE;                //
7710    UCHAR                      uctCKRSE;              //
7711    UCHAR                      uctCKRSX;              //
7712    UCHAR                      uctFAW32;              //
7713    UCHAR                      ucMR5lo;               //
7714    UCHAR                      ucMR5hi;               //
7715    UCHAR                      ucTerminator;
7716 }ATOM_MEMORY_TIMING_FORMAT_V1;
7717 
7718 
7719 
7720 
7721 typedef   struct _ATOM_MEMORY_TIMING_FORMAT_V2
7722 {
7723    ULONG                                  ulClkRange;            // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
7724    USHORT                               usMRS;                     // mode register
7725    USHORT                               usEMRS;                  // extended mode register
7726    UCHAR                                  ucCL;                     // CAS latency
7727    UCHAR                                  ucWL;                     // WRITE Latency
7728    UCHAR                                  uctRAS;                  // tRAS
7729    UCHAR                                  uctRC;                     // tRC
7730    UCHAR                                  uctRFC;                  // tRFC
7731    UCHAR                                  uctRCDR;                  // tRCDR
7732    UCHAR                                  uctRCDW;                  // tRCDW
7733    UCHAR                                  uctRP;                     // tRP
7734    UCHAR                                  uctRRD;                  // tRRD
7735    UCHAR                                  uctWR;                     // tWR
7736    UCHAR                                  uctWTR;                  // tWTR
7737    UCHAR                                  uctPDIX;                  // tPDIX
7738    UCHAR                                  uctFAW;                  // tFAW
7739    UCHAR                                  uctAOND;                  // tAOND
7740    UCHAR                                  ucflag;                  // flag to control memory timing calculation. bit0= control EMRS2 Infineon
7741 ////////////////////////////////////GDDR parameters///////////////////////////////////
7742    UCHAR                                  uctCCDL;                  //
7743    UCHAR                                  uctCRCRL;                  //
7744    UCHAR                                  uctCRCWL;                  //
7745    UCHAR                                  uctCKE;                  //
7746    UCHAR                                  uctCKRSE;                  //
7747    UCHAR                                  uctCKRSX;                  //
7748    UCHAR                                  uctFAW32;                  //
7749    UCHAR                                  ucMR4lo;               //
7750    UCHAR                                  ucMR4hi;               //
7751    UCHAR                                  ucMR5lo;               //
7752    UCHAR                                  ucMR5hi;               //
7753    UCHAR                                  ucTerminator;
7754    UCHAR                                  ucReserved;
7755 }ATOM_MEMORY_TIMING_FORMAT_V2;
7756 
7757 
7758 typedef   struct _ATOM_MEMORY_FORMAT
7759 {
7760    ULONG                       ulDllDisClock;     // memory DLL will be disable when target memory clock is below this clock
7761   union{
7762     USHORT                     usEMRS2Value;      // EMRS2 Value is used for GDDR2 and GDDR4 memory type
7763     USHORT                     usDDR3_Reserved;   // Not used for DDR3 memory
7764   };
7765   union{
7766     USHORT                     usEMRS3Value;      // EMRS3 Value is used for GDDR2 and GDDR4 memory type
7767     USHORT                     usDDR3_MR3;        // Used for DDR3 memory
7768   };
7769   UCHAR                        ucMemoryType;      // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
7770   UCHAR                        ucMemoryVenderID;  // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
7771   UCHAR                        ucRow;             // Number of Row,in power of 2;
7772   UCHAR                        ucColumn;          // Number of Column,in power of 2;
7773   UCHAR                        ucBank;            // Nunber of Bank;
7774   UCHAR                        ucRank;            // Number of Rank, in power of 2
7775   UCHAR                        ucBurstSize;           // burst size, 0= burst size=4  1= burst size=8
7776   UCHAR                        ucDllDisBit;           // position of DLL Enable/Disable bit in EMRS ( Extended Mode Register )
7777   UCHAR                        ucRefreshRateFactor;   // memory refresh rate in unit of ms
7778   UCHAR                        ucDensity;             // _8Mx32, _16Mx32, _16Mx16, _32Mx16
7779   UCHAR                        ucPreamble;            // [7:4] Write Preamble, [3:0] Read Preamble
7780   UCHAR                        ucMemAttrib;           // Memory Device Addribute, like RDBI/WDBI etc
7781   ATOM_MEMORY_TIMING_FORMAT    asMemTiming[5];        // Memory Timing block sort from lower clock to higher clock
7782 }ATOM_MEMORY_FORMAT;
7783 
7784 
7785 typedef struct _ATOM_VRAM_MODULE_V3
7786 {
7787   ULONG                      ulChannelMapCfg;     // board dependent paramenter:Channel combination
7788   USHORT                     usSize;              // size of ATOM_VRAM_MODULE_V3
7789   USHORT                     usDefaultMVDDQ;      // board dependent parameter:Default Memory Core Voltage
7790   USHORT                     usDefaultMVDDC;      // board dependent parameter:Default Memory IO Voltage
7791   UCHAR                      ucExtMemoryID;       // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
7792   UCHAR                      ucChannelNum;        // board dependent parameter:Number of channel;
7793   UCHAR                      ucChannelSize;       // board dependent parameter:32bit or 64bit
7794   UCHAR                      ucVREFI;             // board dependnt parameter: EXT or INT +160mv to -140mv
7795   UCHAR                      ucNPL_RT;            // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
7796   UCHAR                      ucFlag;              // To enable/disable functionalities based on memory type
7797   ATOM_MEMORY_FORMAT         asMemory;            // describ all of video memory parameters from memory spec
7798 }ATOM_VRAM_MODULE_V3;
7799 
7800 
7801 //ATOM_VRAM_MODULE_V3.ucNPL_RT
7802 #define NPL_RT_MASK                                         0x0f
7803 #define BATTERY_ODT_MASK                                    0xc0
7804 
7805 #define ATOM_VRAM_MODULE       ATOM_VRAM_MODULE_V3
7806 
7807 typedef struct _ATOM_VRAM_MODULE_V4
7808 {
7809   ULONG     ulChannelMapCfg;                   // board dependent parameter: Channel combination
7810   USHORT  usModuleSize;                     // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
7811   USHORT  usPrivateReserved;                // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
7812                                             // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
7813   USHORT  usReserved;
7814   UCHAR   ucExtMemoryID;                      // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
7815   UCHAR   ucMemoryType;                     // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
7816   UCHAR   ucChannelNum;                     // Number of channels present in this module config
7817   UCHAR   ucChannelWidth;                   // 0 - 32 bits; 1 - 64 bits
7818    UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
7819    UCHAR     ucFlag;                                  // To enable/disable functionalities based on memory type
7820    UCHAR     ucMisc;                                  // bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8
7821   UCHAR      ucVREFI;                          // board dependent parameter
7822   UCHAR   ucNPL_RT;                         // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
7823   UCHAR      ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
7824   UCHAR   ucMemorySize;                     // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
7825                                             // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
7826   UCHAR   ucReserved[3];
7827 
7828 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
7829   union{
7830     USHORT   usEMRS2Value;                   // EMRS2 Value is used for GDDR2 and GDDR4 memory type
7831     USHORT  usDDR3_Reserved;
7832   };
7833   union{
7834     USHORT   usEMRS3Value;                   // EMRS3 Value is used for GDDR2 and GDDR4 memory type
7835     USHORT  usDDR3_MR3;                     // Used for DDR3 memory
7836   };
7837   UCHAR   ucMemoryVenderID;                    // Predefined, If not predefined, vendor detection table gets executed
7838   UCHAR     ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
7839   UCHAR   ucReserved2[2];
7840   ATOM_MEMORY_TIMING_FORMAT  asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
7841 }ATOM_VRAM_MODULE_V4;
7842 
7843 #define VRAM_MODULE_V4_MISC_RANK_MASK       0x3
7844 #define VRAM_MODULE_V4_MISC_DUAL_RANK       0x1
7845 #define VRAM_MODULE_V4_MISC_BL_MASK         0x4
7846 #define VRAM_MODULE_V4_MISC_BL8             0x4
7847 #define VRAM_MODULE_V4_MISC_DUAL_CS         0x10
7848 
7849 typedef struct _ATOM_VRAM_MODULE_V5
7850 {
7851   ULONG     ulChannelMapCfg;                   // board dependent parameter: Channel combination
7852   USHORT  usModuleSize;                     // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
7853   USHORT  usPrivateReserved;                // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
7854                                             // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
7855   USHORT  usReserved;
7856   UCHAR   ucExtMemoryID;                      // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
7857   UCHAR   ucMemoryType;                     // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
7858   UCHAR   ucChannelNum;                     // Number of channels present in this module config
7859   UCHAR   ucChannelWidth;                   // 0 - 32 bits; 1 - 64 bits
7860    UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
7861    UCHAR     ucFlag;                                  // To enable/disable functionalities based on memory type
7862    UCHAR     ucMisc;                                  // bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8
7863   UCHAR      ucVREFI;                          // board dependent parameter
7864   UCHAR   ucNPL_RT;                         // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
7865   UCHAR      ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
7866   UCHAR   ucMemorySize;                     // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
7867                                             // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
7868   UCHAR   ucReserved[3];
7869 
7870 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
7871   USHORT   usEMRS2Value;                        // EMRS2 Value is used for GDDR2 and GDDR4 memory type
7872   USHORT   usEMRS3Value;                        // EMRS3 Value is used for GDDR2 and GDDR4 memory type
7873   UCHAR   ucMemoryVenderID;                    // Predefined, If not predefined, vendor detection table gets executed
7874   UCHAR     ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
7875   UCHAR     ucFIFODepth;                         // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
7876   UCHAR   ucCDR_Bandwidth;         // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
7877   ATOM_MEMORY_TIMING_FORMAT_V1  asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
7878 }ATOM_VRAM_MODULE_V5;
7879 
7880 
7881 typedef struct _ATOM_VRAM_MODULE_V6
7882 {
7883   ULONG     ulChannelMapCfg;                   // board dependent parameter: Channel combination
7884   USHORT  usModuleSize;                     // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
7885   USHORT  usPrivateReserved;                // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
7886                                             // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
7887   USHORT  usReserved;
7888   UCHAR   ucExtMemoryID;                      // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
7889   UCHAR   ucMemoryType;                     // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
7890   UCHAR   ucChannelNum;                     // Number of channels present in this module config
7891   UCHAR   ucChannelWidth;                   // 0 - 32 bits; 1 - 64 bits
7892    UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
7893    UCHAR     ucFlag;                                  // To enable/disable functionalities based on memory type
7894    UCHAR     ucMisc;                                  // bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8
7895   UCHAR      ucVREFI;                          // board dependent parameter
7896   UCHAR   ucNPL_RT;                         // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
7897   UCHAR      ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
7898   UCHAR   ucMemorySize;                     // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
7899                                             // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
7900   UCHAR   ucReserved[3];
7901 
7902 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
7903   USHORT   usEMRS2Value;                        // EMRS2 Value is used for GDDR2 and GDDR4 memory type
7904   USHORT   usEMRS3Value;                        // EMRS3 Value is used for GDDR2 and GDDR4 memory type
7905   UCHAR   ucMemoryVenderID;                    // Predefined, If not predefined, vendor detection table gets executed
7906   UCHAR     ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
7907   UCHAR     ucFIFODepth;                         // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
7908   UCHAR   ucCDR_Bandwidth;         // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
7909   ATOM_MEMORY_TIMING_FORMAT_V2  asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
7910 }ATOM_VRAM_MODULE_V6;
7911 
7912 typedef struct _ATOM_VRAM_MODULE_V7
7913 {
7914 // Design Specific Values
7915   ULONG   ulChannelMapCfg;                   // mmMC_SHARED_CHREMAP
7916   USHORT  usModuleSize;                     // Size of ATOM_VRAM_MODULE_V7
7917   USHORT  usPrivateReserved;                // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
7918   USHORT  usEnableChannels;                 // bit vector which indicate which channels are enabled
7919   UCHAR   ucExtMemoryID;                    // Current memory module ID
7920   UCHAR   ucMemoryType;                     // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
7921   UCHAR   ucChannelNum;                     // Number of mem. channels supported in this module
7922   UCHAR   ucChannelWidth;                   // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
7923   UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
7924   UCHAR   ucReserve;                        // In MC7x, the lower 4 bits are used as bit8-11 of memory size. In other MC code, it's not used.
7925   UCHAR   ucMisc;                           // RANK_OF_THISMEMORY etc.
7926   UCHAR   ucVREFI;                          // Not used.
7927   UCHAR   ucNPL_RT;                         // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
7928   UCHAR   ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
7929   UCHAR   ucMemorySize;                     // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
7930   USHORT  usSEQSettingOffset;
7931   UCHAR   ucReserved;
7932 // Memory Module specific values
7933   USHORT  usEMRS2Value;                     // EMRS2/MR2 Value.
7934   USHORT  usEMRS3Value;                     // EMRS3/MR3 Value.
7935   UCHAR   ucMemoryVenderID;                 // [7:4] Revision, [3:0] Vendor code
7936   UCHAR   ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
7937   UCHAR   ucFIFODepth;                      // FIFO depth can be detected during vendor detection, here is hardcoded per memory
7938   UCHAR   ucCDR_Bandwidth;                  // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
7939   char    strMemPNString[20];               // part number end with '0'.
7940 }ATOM_VRAM_MODULE_V7;
7941 
7942 
7943 typedef struct _ATOM_VRAM_MODULE_V8
7944 {
7945 // Design Specific Values
7946   ULONG   ulChannelMapCfg;                  // mmMC_SHARED_CHREMAP
7947   USHORT  usModuleSize;                     // Size of ATOM_VRAM_MODULE_V7
7948   USHORT  usMcRamCfg;                       // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
7949   USHORT  usEnableChannels;                 // bit vector which indicate which channels are enabled
7950   UCHAR   ucExtMemoryID;                    // Current memory module ID
7951   UCHAR   ucMemoryType;                     // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
7952   UCHAR   ucChannelNum;                     // Number of mem. channels supported in this module
7953   UCHAR   ucChannelWidth;                   // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
7954   UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
7955   UCHAR   ucBankCol;                        // bit[3:2]= BANK ( =2:16bank, =1:8bank, =0:4bank ) bit[1:0]=Col ( =2: 10 bit, =1:9bit, =0:8bit )
7956   UCHAR   ucMisc;                           // RANK_OF_THISMEMORY etc.
7957   UCHAR   ucVREFI;                          // Not used.
7958   USHORT  usReserved;                       // Not used
7959   USHORT  usMemorySize;                     // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
7960   UCHAR   ucMcTunningSetId;                 // MC phy registers set per.
7961   UCHAR   ucRowNum;
7962 // Memory Module specific values
7963   USHORT  usEMRS2Value;                     // EMRS2/MR2 Value.
7964   USHORT  usEMRS3Value;                     // EMRS3/MR3 Value.
7965   UCHAR   ucMemoryVenderID;                 // [7:4] Revision, [3:0] Vendor code
7966   UCHAR   ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
7967   UCHAR   ucFIFODepth;                      // FIFO depth can be detected during vendor detection, here is hardcoded per memory
7968   UCHAR   ucCDR_Bandwidth;                  // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
7969 
7970   ULONG   ulChannelMapCfg1;                 // channel mapping for channel8~15
7971   ULONG   ulBankMapCfg;
7972   ULONG   ulReserved;
7973   char    strMemPNString[20];               // part number end with '0'.
7974 }ATOM_VRAM_MODULE_V8;
7975 
7976 
7977 typedef struct _ATOM_VRAM_INFO_V2
7978 {
7979   ATOM_COMMON_TABLE_HEADER   sHeader;
7980   UCHAR                      ucNumOfVRAMModule;
7981   ATOM_VRAM_MODULE           aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
7982 }ATOM_VRAM_INFO_V2;
7983 
7984 typedef struct _ATOM_VRAM_INFO_V3
7985 {
7986   ATOM_COMMON_TABLE_HEADER  sHeader;
7987   USHORT                    usMemAdjustTblOffset;                            // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
7988   USHORT                    usMemClkPatchTblOffset;                          // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
7989   USHORT                    usRerseved;
7990   UCHAR                     aVID_PinsShift[9];                               // 8 bit strap maximum+terminator
7991   UCHAR                     ucNumOfVRAMModule;
7992   ATOM_VRAM_MODULE          aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];       // just for allocation, real number of blocks is in ucNumOfVRAMModule;
7993   ATOM_INIT_REG_BLOCK       asMemPatch;                                      // for allocation
7994 
7995 }ATOM_VRAM_INFO_V3;
7996 
7997 #define   ATOM_VRAM_INFO_LAST        ATOM_VRAM_INFO_V3
7998 
7999 typedef struct _ATOM_VRAM_INFO_V4
8000 {
8001   ATOM_COMMON_TABLE_HEADER   sHeader;
8002   USHORT                     usMemAdjustTblOffset;                           // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
8003   USHORT                     usMemClkPatchTblOffset;                         // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
8004   USHORT                     usRerseved;
8005   UCHAR                      ucMemDQ7_0ByteRemap;                            // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
8006   ULONG                      ulMemDQ7_0BitRemap;                             // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
8007   UCHAR                      ucReservde[4];
8008   UCHAR                      ucNumOfVRAMModule;
8009   ATOM_VRAM_MODULE_V4        aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
8010   ATOM_INIT_REG_BLOCK        asMemPatch;                                     // for allocation
8011 }ATOM_VRAM_INFO_V4;
8012 
8013 typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
8014 {
8015   ATOM_COMMON_TABLE_HEADER   sHeader;
8016   USHORT                     usMemAdjustTblOffset;                           // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
8017   USHORT                     usMemClkPatchTblOffset;                         // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
8018   USHORT                     usPerBytePresetOffset;                          // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
8019   USHORT                     usReserved[3];
8020   UCHAR                      ucNumOfVRAMModule;                              // indicate number of VRAM module
8021   UCHAR                      ucMemoryClkPatchTblVer;                         // version of memory AC timing register list
8022   UCHAR                      ucVramModuleVer;                                // indicate ATOM_VRAM_MODUE version
8023   UCHAR                      ucReserved;
8024   ATOM_VRAM_MODULE_V7        aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
8025 }ATOM_VRAM_INFO_HEADER_V2_1;
8026 
8027 typedef struct _ATOM_VRAM_INFO_HEADER_V2_2
8028 {
8029   ATOM_COMMON_TABLE_HEADER   sHeader;
8030   USHORT                     usMemAdjustTblOffset;                           // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
8031   USHORT                     usMemClkPatchTblOffset;                         // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
8032   USHORT                     usMcAdjustPerTileTblOffset;                     // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
8033   USHORT                     usMcPhyInitTableOffset;                         // offset of ATOM_INIT_REG_BLOCK structure for MC phy init set
8034   USHORT                     usDramDataRemapTblOffset;                       // offset of ATOM_DRAM_DATA_REMAP array to indicate DRAM data lane to GPU mapping
8035   USHORT                     usReserved1;
8036   UCHAR                      ucNumOfVRAMModule;                              // indicate number of VRAM module
8037   UCHAR                      ucMemoryClkPatchTblVer;                         // version of memory AC timing register list
8038   UCHAR                      ucVramModuleVer;                                // indicate ATOM_VRAM_MODUE version
8039   UCHAR                      ucMcPhyTileNum;                                 // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
8040   ATOM_VRAM_MODULE_V8        aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
8041 }ATOM_VRAM_INFO_HEADER_V2_2;
8042 
8043 
8044 typedef struct _ATOM_DRAM_DATA_REMAP
8045 {
8046   UCHAR ucByteRemapCh0;
8047   UCHAR ucByteRemapCh1;
8048   ULONG ulByte0BitRemapCh0;
8049   ULONG ulByte1BitRemapCh0;
8050   ULONG ulByte2BitRemapCh0;
8051   ULONG ulByte3BitRemapCh0;
8052   ULONG ulByte0BitRemapCh1;
8053   ULONG ulByte1BitRemapCh1;
8054   ULONG ulByte2BitRemapCh1;
8055   ULONG ulByte3BitRemapCh1;
8056 }ATOM_DRAM_DATA_REMAP;
8057 
8058 typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO
8059 {
8060   ATOM_COMMON_TABLE_HEADER   sHeader;
8061   UCHAR                      aVID_PinsShift[9];                              // 8 bit strap maximum+terminator
8062 }ATOM_VRAM_GPIO_DETECTION_INFO;
8063 
8064 
8065 typedef struct _ATOM_MEMORY_TRAINING_INFO
8066 {
8067    ATOM_COMMON_TABLE_HEADER   sHeader;
8068    UCHAR                                  ucTrainingLoop;
8069    UCHAR                                  ucReserved[3];
8070    ATOM_INIT_REG_BLOCK             asMemTrainingSetting;
8071 }ATOM_MEMORY_TRAINING_INFO;
8072 
8073 
8074 typedef struct _ATOM_MEMORY_TRAINING_INFO_V3_1
8075 {
8076    ATOM_COMMON_TABLE_HEADER   sHeader;
8077    ULONG                      ulMCUcodeVersion;
8078    USHORT                     usMCIOInitLen;         //len of ATOM_REG_INIT_SETTING array
8079    USHORT                     usMCUcodeLen;          //len of ATOM_MC_UCODE_DATA array
8080    USHORT                     usMCIORegInitOffset;   //point of offset of ATOM_REG_INIT_SETTING array
8081    USHORT                     usMCUcodeOffset;       //point of offset of MC uCode ULONG array.
8082 }ATOM_MEMORY_TRAINING_INFO_V3_1;
8083 
8084 
8085 typedef struct SW_I2C_CNTL_DATA_PARAMETERS
8086 {
8087   UCHAR    ucControl;
8088   UCHAR    ucData;
8089   UCHAR    ucSatus;
8090   UCHAR    ucTemp;
8091 } SW_I2C_CNTL_DATA_PARAMETERS;
8092 
8093 #define SW_I2C_CNTL_DATA_PS_ALLOCATION  SW_I2C_CNTL_DATA_PARAMETERS
8094 
8095 typedef struct _SW_I2C_IO_DATA_PARAMETERS
8096 {
8097   USHORT   GPIO_Info;
8098   UCHAR    ucAct;
8099   UCHAR    ucData;
8100  } SW_I2C_IO_DATA_PARAMETERS;
8101 
8102 #define SW_I2C_IO_DATA_PS_ALLOCATION  SW_I2C_IO_DATA_PARAMETERS
8103 
8104 /****************************SW I2C CNTL DEFINITIONS**********************/
8105 #define SW_I2C_IO_RESET       0
8106 #define SW_I2C_IO_GET         1
8107 #define SW_I2C_IO_DRIVE       2
8108 #define SW_I2C_IO_SET         3
8109 #define SW_I2C_IO_START       4
8110 
8111 #define SW_I2C_IO_CLOCK       0
8112 #define SW_I2C_IO_DATA        0x80
8113 
8114 #define SW_I2C_IO_ZERO        0
8115 #define SW_I2C_IO_ONE         0x100
8116 
8117 #define SW_I2C_CNTL_READ      0
8118 #define SW_I2C_CNTL_WRITE     1
8119 #define SW_I2C_CNTL_START     2
8120 #define SW_I2C_CNTL_STOP      3
8121 #define SW_I2C_CNTL_OPEN      4
8122 #define SW_I2C_CNTL_CLOSE     5
8123 #define SW_I2C_CNTL_WRITE1BIT 6
8124 
8125 //==============================VESA definition Portion===============================
8126 #define VESA_OEM_PRODUCT_REV                     '01.00'
8127 #define VESA_MODE_ATTRIBUTE_MODE_SUPPORT        0xBB   //refer to VBE spec p.32, no TTY support
8128 #define VESA_MODE_WIN_ATTRIBUTE                       7
8129 #define VESA_WIN_SIZE                                      64
8130 
8131 typedef struct _PTR_32_BIT_STRUCTURE
8132 {
8133    USHORT   Offset16;
8134    USHORT   Segment16;
8135 } PTR_32_BIT_STRUCTURE;
8136 
8137 typedef union _PTR_32_BIT_UNION
8138 {
8139    PTR_32_BIT_STRUCTURE   SegmentOffset;
8140    ULONG                       Ptr32_Bit;
8141 } PTR_32_BIT_UNION;
8142 
8143 typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE
8144 {
8145    UCHAR                  VbeSignature[4];
8146    USHORT                VbeVersion;
8147    PTR_32_BIT_UNION   OemStringPtr;
8148    UCHAR                  Capabilities[4];
8149    PTR_32_BIT_UNION   VideoModePtr;
8150    USHORT                TotalMemory;
8151 } VBE_1_2_INFO_BLOCK_UPDATABLE;
8152 
8153 
8154 typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE
8155 {
8156    VBE_1_2_INFO_BLOCK_UPDATABLE   CommonBlock;
8157    USHORT                         OemSoftRev;
8158    PTR_32_BIT_UNION            OemVendorNamePtr;
8159    PTR_32_BIT_UNION            OemProductNamePtr;
8160    PTR_32_BIT_UNION            OemProductRevPtr;
8161 } VBE_2_0_INFO_BLOCK_UPDATABLE;
8162 
8163 typedef union _VBE_VERSION_UNION
8164 {
8165    VBE_2_0_INFO_BLOCK_UPDATABLE   VBE_2_0_InfoBlock;
8166    VBE_1_2_INFO_BLOCK_UPDATABLE   VBE_1_2_InfoBlock;
8167 } VBE_VERSION_UNION;
8168 
8169 typedef struct _VBE_INFO_BLOCK
8170 {
8171    VBE_VERSION_UNION         UpdatableVBE_Info;
8172    UCHAR                        Reserved[222];
8173    UCHAR                        OemData[256];
8174 } VBE_INFO_BLOCK;
8175 
8176 typedef struct _VBE_FP_INFO
8177 {
8178   USHORT   HSize;
8179   USHORT   VSize;
8180   USHORT   FPType;
8181   UCHAR    RedBPP;
8182   UCHAR    GreenBPP;
8183   UCHAR    BlueBPP;
8184   UCHAR    ReservedBPP;
8185   ULONG    RsvdOffScrnMemSize;
8186   ULONG    RsvdOffScrnMEmPtr;
8187   UCHAR    Reserved[14];
8188 } VBE_FP_INFO;
8189 
8190 typedef struct _VESA_MODE_INFO_BLOCK
8191 {
8192 // Mandatory information for all VBE revisions
8193   USHORT   ModeAttributes;  //         dw   ?   ; mode attributes
8194   UCHAR    WinAAttributes;  //         db   ?   ; window A attributes
8195   UCHAR    WinBAttributes;  //         db   ?   ; window B attributes
8196   USHORT   WinGranularity;  //         dw   ?   ; window granularity
8197   USHORT   WinSize;         //         dw   ?   ; window size
8198   USHORT   WinASegment;     //         dw   ?   ; window A start segment
8199   USHORT   WinBSegment;     //         dw   ?   ; window B start segment
8200   ULONG    WinFuncPtr;      //         dd   ?   ; real mode pointer to window function
8201   USHORT   BytesPerScanLine;//         dw   ?   ; bytes per scan line
8202 
8203 //; Mandatory information for VBE 1.2 and above
8204   USHORT   XResolution;      //         dw   ?   ; horizontal resolution in pixels or characters
8205   USHORT   YResolution;      //         dw   ?   ; vertical resolution in pixels or characters
8206   UCHAR    XCharSize;        //         db   ?   ; character cell width in pixels
8207   UCHAR    YCharSize;        //         db   ?   ; character cell height in pixels
8208   UCHAR    NumberOfPlanes;   //         db   ?   ; number of memory planes
8209   UCHAR    BitsPerPixel;     //         db   ?   ; bits per pixel
8210   UCHAR    NumberOfBanks;    //         db   ?   ; number of banks
8211   UCHAR    MemoryModel;      //         db   ?   ; memory model type
8212   UCHAR    BankSize;         //         db   ?   ; bank size in KB
8213   UCHAR    NumberOfImagePages;//        db   ?   ; number of images
8214   UCHAR    ReservedForPageFunction;//db   1   ; reserved for page function
8215 
8216 //; Direct Color fields(required for direct/6 and YUV/7 memory models)
8217   UCHAR    RedMaskSize;        //      db   ?   ; size of direct color red mask in bits
8218   UCHAR    RedFieldPosition;   //      db   ?   ; bit position of lsb of red mask
8219   UCHAR    GreenMaskSize;      //      db   ?   ; size of direct color green mask in bits
8220   UCHAR    GreenFieldPosition; //      db   ?   ; bit position of lsb of green mask
8221   UCHAR    BlueMaskSize;       //      db   ?   ; size of direct color blue mask in bits
8222   UCHAR    BlueFieldPosition;  //      db   ?   ; bit position of lsb of blue mask
8223   UCHAR    RsvdMaskSize;       //      db   ?   ; size of direct color reserved mask in bits
8224   UCHAR    RsvdFieldPosition;  //      db   ?   ; bit position of lsb of reserved mask
8225   UCHAR    DirectColorModeInfo;//      db   ?   ; direct color mode attributes
8226 
8227 //; Mandatory information for VBE 2.0 and above
8228   ULONG    PhysBasePtr;        //      dd   ?   ; physical address for flat memory frame buffer
8229   ULONG    Reserved_1;         //      dd   0   ; reserved - always set to 0
8230   USHORT   Reserved_2;         //     dw   0   ; reserved - always set to 0
8231 
8232 //; Mandatory information for VBE 3.0 and above
8233   USHORT   LinBytesPerScanLine;  //   dw   ?   ; bytes per scan line for linear modes
8234   UCHAR    BnkNumberOfImagePages;//   db   ?   ; number of images for banked modes
8235   UCHAR    LinNumberOfImagPages; //   db   ?   ; number of images for linear modes
8236   UCHAR    LinRedMaskSize;       //   db   ?   ; size of direct color red mask(linear modes)
8237   UCHAR    LinRedFieldPosition;  //   db   ?   ; bit position of lsb of red mask(linear modes)
8238   UCHAR    LinGreenMaskSize;     //   db   ?   ; size of direct color green mask(linear modes)
8239   UCHAR    LinGreenFieldPosition;//   db   ?   ; bit position of lsb of green mask(linear modes)
8240   UCHAR    LinBlueMaskSize;      //   db   ?   ; size of direct color blue mask(linear modes)
8241   UCHAR    LinBlueFieldPosition; //   db   ?   ; bit position of lsb of blue mask(linear modes)
8242   UCHAR    LinRsvdMaskSize;      //   db   ?   ; size of direct color reserved mask(linear modes)
8243   UCHAR    LinRsvdFieldPosition; //   db   ?   ; bit position of lsb of reserved mask(linear modes)
8244   ULONG    MaxPixelClock;        //   dd   ?   ; maximum pixel clock(in Hz) for graphics mode
8245   UCHAR    Reserved;             //   db   190 dup (0)
8246 } VESA_MODE_INFO_BLOCK;
8247 
8248 // BIOS function CALLS
8249 #define ATOM_BIOS_EXTENDED_FUNCTION_CODE        0xA0           // ATI Extended Function code
8250 #define ATOM_BIOS_FUNCTION_COP_MODE             0x00
8251 #define ATOM_BIOS_FUNCTION_SHORT_QUERY1         0x04
8252 #define ATOM_BIOS_FUNCTION_SHORT_QUERY2         0x05
8253 #define ATOM_BIOS_FUNCTION_SHORT_QUERY3         0x06
8254 #define ATOM_BIOS_FUNCTION_GET_DDC              0x0B
8255 #define ATOM_BIOS_FUNCTION_ASIC_DSTATE          0x0E
8256 #define ATOM_BIOS_FUNCTION_DEBUG_PLAY           0x0F
8257 #define ATOM_BIOS_FUNCTION_STV_STD              0x16
8258 #define ATOM_BIOS_FUNCTION_DEVICE_DET           0x17
8259 #define ATOM_BIOS_FUNCTION_DEVICE_SWITCH        0x18
8260 
8261 #define ATOM_BIOS_FUNCTION_PANEL_CONTROL        0x82
8262 #define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET       0x83
8263 #define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH    0x84
8264 #define ATOM_BIOS_FUNCTION_HW_ICON              0x8A
8265 #define ATOM_BIOS_FUNCTION_SET_CMOS             0x8B
8266 #define SUB_FUNCTION_UPDATE_DISPLAY_INFO        0x8000          // Sub function 80
8267 #define SUB_FUNCTION_UPDATE_EXPANSION_INFO      0x8100          // Sub function 80
8268 
8269 #define ATOM_BIOS_FUNCTION_DISPLAY_INFO         0x8D
8270 #define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF        0x8E
8271 #define ATOM_BIOS_FUNCTION_VIDEO_STATE          0x8F
8272 #define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE    0x0300          // Sub function 03
8273 #define ATOM_SUB_FUNCTION_GET_LIDSTATE          0x0700          // Sub function 7
8274 #define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE  0x1400          // Notify caller the current thermal state
8275 #define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300          // Notify caller the current critical state
8276 #define ATOM_SUB_FUNCTION_SET_LIDSTATE          0x8500          // Sub function 85
8277 #define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900// Sub function 89
8278 #define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT    0x9400          // Notify caller that ADC is supported
8279 
8280 
8281 #define ATOM_BIOS_FUNCTION_VESA_DPMS            0x4F10          // Set DPMS
8282 #define ATOM_SUB_FUNCTION_SET_DPMS              0x0001          // BL: Sub function 01
8283 #define ATOM_SUB_FUNCTION_GET_DPMS              0x0002          // BL: Sub function 02
8284 #define ATOM_PARAMETER_VESA_DPMS_ON             0x0000          // BH Parameter for DPMS ON.
8285 #define ATOM_PARAMETER_VESA_DPMS_STANDBY        0x0100          // BH Parameter for DPMS STANDBY
8286 #define ATOM_PARAMETER_VESA_DPMS_SUSPEND        0x0200          // BH Parameter for DPMS SUSPEND
8287 #define ATOM_PARAMETER_VESA_DPMS_OFF            0x0400          // BH Parameter for DPMS OFF
8288 #define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON      0x0800          // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED)
8289 
8290 #define ATOM_BIOS_RETURN_CODE_MASK              0x0000FF00L
8291 #define ATOM_BIOS_REG_HIGH_MASK                 0x0000FF00L
8292 #define ATOM_BIOS_REG_LOW_MASK                  0x000000FFL
8293 
8294 // structure used for VBIOS only
8295 
8296 //DispOutInfoTable
8297 typedef struct _ASIC_TRANSMITTER_INFO
8298 {
8299    USHORT usTransmitterObjId;
8300    USHORT usSupportDevice;
8301    UCHAR  ucTransmitterCmdTblId;
8302    UCHAR  ucConfig;
8303    UCHAR  ucEncoderID;                //available 1st encoder ( default )
8304    UCHAR  ucOptionEncoderID;    //available 2nd encoder ( optional )
8305    UCHAR  uc2ndEncoderID;
8306    UCHAR  ucReserved;
8307 }ASIC_TRANSMITTER_INFO;
8308 
8309 #define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE          0x01
8310 #define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE         0x02
8311 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK    0xc4
8312 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A             0x00
8313 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B             0x04
8314 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C             0x40
8315 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D             0x44
8316 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E             0x80
8317 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F             0x84
8318 
8319 typedef struct _ASIC_ENCODER_INFO
8320 {
8321    UCHAR ucEncoderID;
8322    UCHAR ucEncoderConfig;
8323   USHORT usEncoderCmdTblId;
8324 }ASIC_ENCODER_INFO;
8325 
8326 typedef struct _ATOM_DISP_OUT_INFO
8327 {
8328   ATOM_COMMON_TABLE_HEADER sHeader;
8329    USHORT ptrTransmitterInfo;
8330    USHORT ptrEncoderInfo;
8331    ASIC_TRANSMITTER_INFO  asTransmitterInfo[1];
8332    ASIC_ENCODER_INFO      asEncoderInfo[1];
8333 }ATOM_DISP_OUT_INFO;
8334 
8335 
8336 typedef struct _ATOM_DISP_OUT_INFO_V2
8337 {
8338   ATOM_COMMON_TABLE_HEADER sHeader;
8339    USHORT ptrTransmitterInfo;
8340    USHORT ptrEncoderInfo;
8341   USHORT ptrMainCallParserFar;                  // direct address of main parser call in VBIOS binary.
8342    ASIC_TRANSMITTER_INFO  asTransmitterInfo[1];
8343    ASIC_ENCODER_INFO      asEncoderInfo[1];
8344 }ATOM_DISP_OUT_INFO_V2;
8345 
8346 
8347 typedef struct _ATOM_DISP_CLOCK_ID {
8348   UCHAR ucPpllId;
8349   UCHAR ucPpllAttribute;
8350 }ATOM_DISP_CLOCK_ID;
8351 
8352 // ucPpllAttribute
8353 #define CLOCK_SOURCE_SHAREABLE            0x01
8354 #define CLOCK_SOURCE_DP_MODE              0x02
8355 #define CLOCK_SOURCE_NONE_DP_MODE         0x04
8356 
8357 //DispOutInfoTable
8358 typedef struct _ASIC_TRANSMITTER_INFO_V2
8359 {
8360    USHORT usTransmitterObjId;
8361    USHORT usDispClkIdOffset;    // point to clock source id list supported by Encoder Object
8362   UCHAR  ucTransmitterCmdTblId;
8363    UCHAR  ucConfig;
8364    UCHAR  ucEncoderID;                // available 1st encoder ( default )
8365    UCHAR  ucOptionEncoderID;    // available 2nd encoder ( optional )
8366    UCHAR  uc2ndEncoderID;
8367    UCHAR  ucReserved;
8368 }ASIC_TRANSMITTER_INFO_V2;
8369 
8370 typedef struct _ATOM_DISP_OUT_INFO_V3
8371 {
8372   ATOM_COMMON_TABLE_HEADER sHeader;
8373   USHORT ptrTransmitterInfo;
8374   USHORT ptrEncoderInfo;
8375   USHORT ptrMainCallParserFar;                  // direct address of main parser call in VBIOS binary.
8376   USHORT usReserved;
8377   UCHAR  ucDCERevision;
8378   UCHAR  ucMaxDispEngineNum;
8379   UCHAR  ucMaxActiveDispEngineNum;
8380   UCHAR  ucMaxPPLLNum;
8381   UCHAR  ucCoreRefClkSource;                    // value of CORE_REF_CLK_SOURCE
8382   UCHAR  ucDispCaps;
8383   UCHAR  ucReserved[2];
8384   ASIC_TRANSMITTER_INFO_V2  asTransmitterInfo[1];     // for alligment only
8385 }ATOM_DISP_OUT_INFO_V3;
8386 
8387 //ucDispCaps
8388 #define DISPLAY_CAPS__DP_PCLK_FROM_PPLL        0x01
8389 #define DISPLAY_CAPS__FORCE_DISPDEV_CONNECTED  0x02
8390 
8391 typedef enum CORE_REF_CLK_SOURCE{
8392   CLOCK_SRC_XTALIN=0,
8393   CLOCK_SRC_XO_IN=1,
8394   CLOCK_SRC_XO_IN2=2,
8395 }CORE_REF_CLK_SOURCE;
8396 
8397 // DispDevicePriorityInfo
8398 typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
8399 {
8400   ATOM_COMMON_TABLE_HEADER sHeader;
8401    USHORT asDevicePriority[16];
8402 }ATOM_DISPLAY_DEVICE_PRIORITY_INFO;
8403 
8404 //ProcessAuxChannelTransactionTable
8405 typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
8406 {
8407    USHORT  lpAuxRequest;
8408    USHORT  lpDataOut;
8409    UCHAR   ucChannelID;
8410    union
8411    {
8412   UCHAR   ucReplyStatus;
8413    UCHAR   ucDelay;
8414    };
8415   UCHAR   ucDataOutLen;
8416    UCHAR   ucReserved;
8417 }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;
8418 
8419 //ProcessAuxChannelTransactionTable
8420 typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2
8421 {
8422    USHORT   lpAuxRequest;
8423    USHORT  lpDataOut;
8424    UCHAR      ucChannelID;
8425    union
8426    {
8427   UCHAR   ucReplyStatus;
8428    UCHAR   ucDelay;
8429    };
8430   UCHAR   ucDataOutLen;
8431    UCHAR   ucHPD_ID;                                       //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6
8432 }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2;
8433 
8434 #define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION         PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
8435 
8436 //GetSinkType
8437 
8438 typedef struct _DP_ENCODER_SERVICE_PARAMETERS
8439 {
8440    USHORT ucLinkClock;
8441    union
8442    {
8443    UCHAR ucConfig;            // for DP training command
8444    UCHAR ucI2cId;            // use for GET_SINK_TYPE command
8445    };
8446    UCHAR ucAction;
8447    UCHAR ucStatus;
8448    UCHAR ucLaneNum;
8449    UCHAR ucReserved[2];
8450 }DP_ENCODER_SERVICE_PARAMETERS;
8451 
8452 // ucAction
8453 #define ATOM_DP_ACTION_GET_SINK_TYPE                     0x01
8454 
8455 #define DP_ENCODER_SERVICE_PS_ALLOCATION            WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
8456 
8457 
8458 typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2
8459 {
8460    USHORT usExtEncoderObjId;   // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
8461   UCHAR  ucAuxId;
8462   UCHAR  ucAction;
8463   UCHAR  ucSinkType;          // Iput and Output parameters.
8464   UCHAR  ucHPDId;             // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
8465    UCHAR  ucReserved[2];
8466 }DP_ENCODER_SERVICE_PARAMETERS_V2;
8467 
8468 typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2
8469 {
8470   DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam;
8471   PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam;
8472 }DP_ENCODER_SERVICE_PS_ALLOCATION_V2;
8473 
8474 // ucAction
8475 #define DP_SERVICE_V2_ACTION_GET_SINK_TYPE                     0x01
8476 #define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION             0x02
8477 
8478 
8479 // DP_TRAINING_TABLE
8480 #define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR            ATOM_DP_TRAINING_TBL_ADDR
8481 #define DPCD_SET_SS_CNTL_TBL_ADDR                                       (ATOM_DP_TRAINING_TBL_ADDR + 8 )
8482 #define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR                     (ATOM_DP_TRAINING_TBL_ADDR + 16 )
8483 #define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR                        (ATOM_DP_TRAINING_TBL_ADDR + 24 )
8484 #define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR                        (ATOM_DP_TRAINING_TBL_ADDR + 32)
8485 #define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR                     (ATOM_DP_TRAINING_TBL_ADDR + 40)
8486 #define   DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR                     (ATOM_DP_TRAINING_TBL_ADDR + 48)
8487 #define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR                        (ATOM_DP_TRAINING_TBL_ADDR + 60)
8488 #define DP_I2C_AUX_DDC_WRITE_TBL_ADDR                                 (ATOM_DP_TRAINING_TBL_ADDR + 64)
8489 #define DP_I2C_AUX_DDC_READ_START_TBL_ADDR                        (ATOM_DP_TRAINING_TBL_ADDR + 72)
8490 #define DP_I2C_AUX_DDC_READ_TBL_ADDR                                 (ATOM_DP_TRAINING_TBL_ADDR + 76)
8491 #define DP_I2C_AUX_DDC_WRITE_END_TBL_ADDR                 (ATOM_DP_TRAINING_TBL_ADDR + 80)
8492 #define DP_I2C_AUX_DDC_READ_END_TBL_ADDR                           (ATOM_DP_TRAINING_TBL_ADDR + 84)
8493 
8494 
8495 typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
8496 {
8497    UCHAR   ucI2CSpeed;
8498     union
8499    {
8500    UCHAR ucRegIndex;
8501    UCHAR ucStatus;
8502    };
8503    USHORT  lpI2CDataOut;
8504   UCHAR   ucFlag;
8505   UCHAR   ucTransBytes;
8506   UCHAR   ucSlaveAddr;
8507   UCHAR   ucLineNumber;
8508 }PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;
8509 
8510 #define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION       PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
8511 
8512 //ucFlag
8513 #define HW_I2C_WRITE        1
8514 #define HW_I2C_READ         0
8515 #define I2C_2BYTE_ADDR      0x02
8516 
8517 /****************************************************************************/
8518 // Structures used by HW_Misc_OperationTable
8519 /****************************************************************************/
8520 typedef struct  _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1
8521 {
8522   UCHAR  ucCmd;                //  Input: To tell which action to take
8523   UCHAR  ucReserved[3];
8524   ULONG  ulReserved;
8525 }ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1;
8526 
8527 typedef struct  _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1
8528 {
8529   UCHAR  ucReturnCode;        // Output: Return value base on action was taken
8530   UCHAR  ucReserved[3];
8531   ULONG  ulReserved;
8532 }ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1;
8533 
8534 // Actions code
8535 #define  ATOM_GET_SDI_SUPPORT              0xF0
8536 
8537 // Return code
8538 #define  ATOM_UNKNOWN_CMD                   0
8539 #define  ATOM_FEATURE_NOT_SUPPORTED         1
8540 #define  ATOM_FEATURE_SUPPORTED             2
8541 
8542 typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION
8543 {
8544    ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1        sInput_Output;
8545    PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS         sReserved;
8546 }ATOM_HW_MISC_OPERATION_PS_ALLOCATION;
8547 
8548 /****************************************************************************/
8549 
8550 typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
8551 {
8552    UCHAR ucHWBlkInst;                // HW block instance, 0, 1, 2, ...
8553    UCHAR ucReserved[3];
8554 }SET_HWBLOCK_INSTANCE_PARAMETER_V2;
8555 
8556 #define HWBLKINST_INSTANCE_MASK       0x07
8557 #define HWBLKINST_HWBLK_MASK          0xF0
8558 #define HWBLKINST_HWBLK_SHIFT         0x04
8559 
8560 //ucHWBlock
8561 #define SELECT_DISP_ENGINE            0
8562 #define SELECT_DISP_PLL               1
8563 #define SELECT_DCIO_UNIPHY_LINK0      2
8564 #define SELECT_DCIO_UNIPHY_LINK1      3
8565 #define SELECT_DCIO_IMPCAL            4
8566 #define SELECT_DCIO_DIG               6
8567 #define SELECT_CRTC_PIXEL_RATE        7
8568 #define SELECT_VGA_BLK                8
8569 
8570 // DIGTransmitterInfoTable structure used to program UNIPHY settings
8571 typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{
8572   ATOM_COMMON_TABLE_HEADER sHeader;
8573   USHORT usDPVsPreEmphSettingOffset;     // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
8574   USHORT usPhyAnalogRegListOffset;       // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
8575   USHORT usPhyAnalogSettingOffset;       // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
8576   USHORT usPhyPllRegListOffset;          // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
8577   USHORT usPhyPllSettingOffset;          // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
8578 }DIG_TRANSMITTER_INFO_HEADER_V3_1;
8579 
8580 typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_2{
8581   ATOM_COMMON_TABLE_HEADER sHeader;
8582   USHORT usDPVsPreEmphSettingOffset;     // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
8583   USHORT usPhyAnalogRegListOffset;       // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
8584   USHORT usPhyAnalogSettingOffset;       // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
8585   USHORT usPhyPllRegListOffset;          // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
8586   USHORT usPhyPllSettingOffset;          // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
8587   USHORT usDPSSRegListOffset;            // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info
8588   USHORT usDPSSSettingOffset;            // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings
8589 }DIG_TRANSMITTER_INFO_HEADER_V3_2;
8590 
8591 
8592 typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_3{
8593   ATOM_COMMON_TABLE_HEADER sHeader;
8594   USHORT usDPVsPreEmphSettingOffset;     // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
8595   USHORT usPhyAnalogRegListOffset;       // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
8596   USHORT usPhyAnalogSettingOffset;       // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
8597   USHORT usPhyPllRegListOffset;          // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
8598   USHORT usPhyPllSettingOffset;          // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
8599   USHORT usDPSSRegListOffset;            // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info
8600   USHORT usDPSSSettingOffset;            // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings
8601   USHORT usEDPVsLegacyModeOffset;        // offset of PHY_ANALOG_SETTING_INFO * with eDP Legacy Mode Voltage Swing and Pre-Emphasis for each Link clock
8602   USHORT useDPVsLowVdiffModeOffset;      // offset of PHY_ANALOG_SETTING_INFO * with eDP Low VDiff Mode Voltage Swing and Pre-Emphasis for each Link clock
8603   USHORT useDPVsHighVdiffModeOffset;     // offset of PHY_ANALOG_SETTING_INFO * with eDP High VDiff Mode Voltage Swing and Pre-Emphasis for each Link clock
8604   USHORT useDPVsStretchModeOffset;       // offset of PHY_ANALOG_SETTING_INFO * with eDP Stretch Mode Voltage Swing and Pre-Emphasis for each Link clock
8605   USHORT useDPVsSingleVdiffModeOffset;   // offset of PHY_ANALOG_SETTING_INFO * with eDP Single Vdiff Mode Voltage Swing and Pre-Emphasis for each Link clock
8606   USHORT useDPVsVariablePremModeOffset;  // offset of PHY_ANALOG_SETTING_INFO * with eDP Single Vidff+Variable PreEmphasis Voltage Swing and Pre-Emphasis for each Link clock
8607 }DIG_TRANSMITTER_INFO_HEADER_V3_3;
8608 
8609 
8610 typedef struct _CLOCK_CONDITION_REGESTER_INFO{
8611   USHORT usRegisterIndex;
8612   UCHAR  ucStartBit;
8613   UCHAR  ucEndBit;
8614 }CLOCK_CONDITION_REGESTER_INFO;
8615 
8616 typedef struct _CLOCK_CONDITION_SETTING_ENTRY{
8617   USHORT usMaxClockFreq;
8618   UCHAR  ucEncodeMode;
8619   UCHAR  ucPhySel;
8620   ULONG  ulAnalogSetting[1];
8621 }CLOCK_CONDITION_SETTING_ENTRY;
8622 
8623 typedef struct _CLOCK_CONDITION_SETTING_INFO{
8624   USHORT usEntrySize;
8625   CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1];
8626 }CLOCK_CONDITION_SETTING_INFO;
8627 
8628 typedef struct _PHY_CONDITION_REG_VAL{
8629   ULONG  ulCondition;
8630   ULONG  ulRegVal;
8631 }PHY_CONDITION_REG_VAL;
8632 
8633 typedef struct _PHY_CONDITION_REG_VAL_V2{
8634   ULONG  ulCondition;
8635   UCHAR  ucCondition2;
8636   ULONG  ulRegVal;
8637 }PHY_CONDITION_REG_VAL_V2;
8638 
8639 typedef struct _PHY_CONDITION_REG_INFO{
8640   USHORT usRegIndex;
8641   USHORT usSize;
8642   PHY_CONDITION_REG_VAL asRegVal[1];
8643 }PHY_CONDITION_REG_INFO;
8644 
8645 typedef struct _PHY_CONDITION_REG_INFO_V2{
8646   USHORT usRegIndex;
8647   USHORT usSize;
8648   PHY_CONDITION_REG_VAL_V2 asRegVal[1];
8649 }PHY_CONDITION_REG_INFO_V2;
8650 
8651 typedef struct _PHY_ANALOG_SETTING_INFO{
8652   UCHAR  ucEncodeMode;
8653   UCHAR  ucPhySel;
8654   USHORT usSize;
8655   PHY_CONDITION_REG_INFO  asAnalogSetting[1];
8656 }PHY_ANALOG_SETTING_INFO;
8657 
8658 typedef struct _PHY_ANALOG_SETTING_INFO_V2{
8659   UCHAR  ucEncodeMode;
8660   UCHAR  ucPhySel;
8661   USHORT usSize;
8662   PHY_CONDITION_REG_INFO_V2  asAnalogSetting[1];
8663 }PHY_ANALOG_SETTING_INFO_V2;
8664 
8665 
8666 typedef struct _GFX_HAVESTING_PARAMETERS {
8667   UCHAR ucGfxBlkId;                        //GFX blk id to be harvested, like CU, RB or PRIM
8668   UCHAR ucReserved;                        //reserved
8669   UCHAR ucActiveUnitNumPerSH;              //requested active CU/RB/PRIM number per shader array
8670   UCHAR ucMaxUnitNumPerSH;                 //max CU/RB/PRIM number per shader array
8671 } GFX_HAVESTING_PARAMETERS;
8672 
8673 //ucGfxBlkId
8674 #define GFX_HARVESTING_CU_ID               0
8675 #define GFX_HARVESTING_RB_ID               1
8676 #define GFX_HARVESTING_PRIM_ID             2
8677 
8678 
8679 typedef struct _VBIOS_ROM_HEADER{
8680   UCHAR  PciRomSignature[2];
8681   UCHAR  ucPciRomSizeIn512bytes;
8682   UCHAR  ucJumpCoreMainInitBIOS;
8683   USHORT usLabelCoreMainInitBIOS;
8684   UCHAR  PciReservedSpace[18];
8685   USHORT usPciDataStructureOffset;
8686   UCHAR  Rsvd1d_1a[4];
8687   char   strIbm[3];
8688   UCHAR  CheckSum[14];
8689   UCHAR  ucBiosMsgNumber;
8690   char   str761295520[16];
8691   USHORT usLabelCoreVPOSTNoMode;
8692   USHORT usSpecialPostOffset;
8693   UCHAR  ucSpeicalPostImageSizeIn512Bytes;
8694   UCHAR  Rsved47_45[3];
8695   USHORT usROM_HeaderInformationTableOffset;
8696   UCHAR  Rsved4f_4a[6];
8697   char   strBuildTimeStamp[20];
8698   UCHAR  ucJumpCoreXFuncFarHandler;
8699   USHORT usCoreXFuncFarHandlerOffset;
8700   UCHAR  ucRsved67;
8701   UCHAR  ucJumpCoreVFuncFarHandler;
8702   USHORT usCoreVFuncFarHandlerOffset;
8703   UCHAR  Rsved6d_6b[3];
8704   USHORT usATOM_BIOS_MESSAGE_Offset;
8705 }VBIOS_ROM_HEADER;
8706 
8707 /****************************************************************************/
8708 //Portion VI: Definitinos for vbios MC scratch registers that driver used
8709 /****************************************************************************/
8710 
8711 #define MC_MISC0__MEMORY_TYPE_MASK    0xF0000000
8712 #define MC_MISC0__MEMORY_TYPE__GDDR1  0x10000000
8713 #define MC_MISC0__MEMORY_TYPE__DDR2   0x20000000
8714 #define MC_MISC0__MEMORY_TYPE__GDDR3  0x30000000
8715 #define MC_MISC0__MEMORY_TYPE__GDDR4  0x40000000
8716 #define MC_MISC0__MEMORY_TYPE__GDDR5  0x50000000
8717 #define MC_MISC0__MEMORY_TYPE__HBM    0x60000000
8718 #define MC_MISC0__MEMORY_TYPE__DDR3   0xB0000000
8719 
8720 #define ATOM_MEM_TYPE_DDR_STRING      "DDR"
8721 #define ATOM_MEM_TYPE_DDR2_STRING     "DDR2"
8722 #define ATOM_MEM_TYPE_GDDR3_STRING    "GDDR3"
8723 #define ATOM_MEM_TYPE_GDDR4_STRING    "GDDR4"
8724 #define ATOM_MEM_TYPE_GDDR5_STRING    "GDDR5"
8725 #define ATOM_MEM_TYPE_HBM_STRING      "HBM"
8726 #define ATOM_MEM_TYPE_DDR3_STRING     "DDR3"
8727 
8728 /****************************************************************************/
8729 //Portion VII: Definitinos being oboselete
8730 /****************************************************************************/
8731 
8732 //==========================================================================================
8733 //Remove the definitions below when driver is ready!
8734 typedef struct _ATOM_DAC_INFO
8735 {
8736   ATOM_COMMON_TABLE_HEADER sHeader;
8737   USHORT                   usMaxFrequency;      // in 10kHz unit
8738   USHORT                   usReserved;
8739 }ATOM_DAC_INFO;
8740 
8741 
8742 typedef struct  _COMPASSIONATE_DATA
8743 {
8744   ATOM_COMMON_TABLE_HEADER sHeader;
8745 
8746   //==============================  DAC1 portion
8747   UCHAR   ucDAC1_BG_Adjustment;
8748   UCHAR   ucDAC1_DAC_Adjustment;
8749   USHORT  usDAC1_FORCE_Data;
8750   //==============================  DAC2 portion
8751   UCHAR   ucDAC2_CRT2_BG_Adjustment;
8752   UCHAR   ucDAC2_CRT2_DAC_Adjustment;
8753   USHORT  usDAC2_CRT2_FORCE_Data;
8754   USHORT  usDAC2_CRT2_MUX_RegisterIndex;
8755   UCHAR   ucDAC2_CRT2_MUX_RegisterInfo;     //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
8756   UCHAR   ucDAC2_NTSC_BG_Adjustment;
8757   UCHAR   ucDAC2_NTSC_DAC_Adjustment;
8758   USHORT  usDAC2_TV1_FORCE_Data;
8759   USHORT  usDAC2_TV1_MUX_RegisterIndex;
8760   UCHAR   ucDAC2_TV1_MUX_RegisterInfo;      //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
8761   UCHAR   ucDAC2_CV_BG_Adjustment;
8762   UCHAR   ucDAC2_CV_DAC_Adjustment;
8763   USHORT  usDAC2_CV_FORCE_Data;
8764   USHORT  usDAC2_CV_MUX_RegisterIndex;
8765   UCHAR   ucDAC2_CV_MUX_RegisterInfo;       //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
8766   UCHAR   ucDAC2_PAL_BG_Adjustment;
8767   UCHAR   ucDAC2_PAL_DAC_Adjustment;
8768   USHORT  usDAC2_TV2_FORCE_Data;
8769 }COMPASSIONATE_DATA;
8770 
8771 /****************************Supported Device Info Table Definitions**********************/
8772 //  ucConnectInfo:
8773 //    [7:4] - connector type
8774 //      = 1   - VGA connector
8775 //      = 2   - DVI-I
8776 //      = 3   - DVI-D
8777 //      = 4   - DVI-A
8778 //      = 5   - SVIDEO
8779 //      = 6   - COMPOSITE
8780 //      = 7   - LVDS
8781 //      = 8   - DIGITAL LINK
8782 //      = 9   - SCART
8783 //      = 0xA - HDMI_type A
8784 //      = 0xB - HDMI_type B
8785 //      = 0xE - Special case1 (DVI+DIN)
8786 //      Others=TBD
8787 //    [3:0] - DAC Associated
8788 //      = 0   - no DAC
8789 //      = 1   - DACA
8790 //      = 2   - DACB
8791 //      = 3   - External DAC
8792 //      Others=TBD
8793 //
8794 
8795 typedef struct _ATOM_CONNECTOR_INFO
8796 {
8797 #if ATOM_BIG_ENDIAN
8798   UCHAR   bfConnectorType:4;
8799   UCHAR   bfAssociatedDAC:4;
8800 #else
8801   UCHAR   bfAssociatedDAC:4;
8802   UCHAR   bfConnectorType:4;
8803 #endif
8804 }ATOM_CONNECTOR_INFO;
8805 
8806 typedef union _ATOM_CONNECTOR_INFO_ACCESS
8807 {
8808   ATOM_CONNECTOR_INFO sbfAccess;
8809   UCHAR               ucAccess;
8810 }ATOM_CONNECTOR_INFO_ACCESS;
8811 
8812 typedef struct _ATOM_CONNECTOR_INFO_I2C
8813 {
8814   ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
8815   ATOM_I2C_ID_CONFIG_ACCESS  sucI2cId;
8816 }ATOM_CONNECTOR_INFO_I2C;
8817 
8818 
8819 typedef struct _ATOM_SUPPORTED_DEVICES_INFO
8820 {
8821   ATOM_COMMON_TABLE_HEADER   sHeader;
8822   USHORT                    usDeviceSupport;
8823   ATOM_CONNECTOR_INFO_I2C   asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
8824 }ATOM_SUPPORTED_DEVICES_INFO;
8825 
8826 #define NO_INT_SRC_MAPPED       0xFF
8827 
8828 typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP
8829 {
8830   UCHAR   ucIntSrcBitmap;
8831 }ATOM_CONNECTOR_INC_SRC_BITMAP;
8832 
8833 typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2
8834 {
8835   ATOM_COMMON_TABLE_HEADER      sHeader;
8836   USHORT                        usDeviceSupport;
8837   ATOM_CONNECTOR_INFO_I2C       asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
8838   ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
8839 }ATOM_SUPPORTED_DEVICES_INFO_2;
8840 
8841 typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1
8842 {
8843   ATOM_COMMON_TABLE_HEADER      sHeader;
8844   USHORT                        usDeviceSupport;
8845   ATOM_CONNECTOR_INFO_I2C       asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
8846   ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
8847 }ATOM_SUPPORTED_DEVICES_INFO_2d1;
8848 
8849 #define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
8850 
8851 
8852 
8853 typedef struct _ATOM_MISC_CONTROL_INFO
8854 {
8855    USHORT usFrequency;
8856    UCHAR  ucPLL_ChargePump;                            // PLL charge-pump gain control
8857    UCHAR  ucPLL_DutyCycle;                            // PLL duty cycle control
8858    UCHAR  ucPLL_VCO_Gain;                              // PLL VCO gain control
8859    UCHAR  ucPLL_VoltageSwing;                         // PLL driver voltage swing control
8860 }ATOM_MISC_CONTROL_INFO;
8861 
8862 
8863 #define ATOM_MAX_MISC_INFO       4
8864 
8865 typedef struct _ATOM_TMDS_INFO
8866 {
8867   ATOM_COMMON_TABLE_HEADER sHeader;
8868   USHORT                     usMaxFrequency;             // in 10Khz
8869   ATOM_MISC_CONTROL_INFO            asMiscInfo[ATOM_MAX_MISC_INFO];
8870 }ATOM_TMDS_INFO;
8871 
8872 
8873 typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE
8874 {
8875   UCHAR ucTVStandard;     //Same as TV standards defined above,
8876   UCHAR ucPadding[1];
8877 }ATOM_ENCODER_ANALOG_ATTRIBUTE;
8878 
8879 typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE
8880 {
8881   UCHAR ucAttribute;      //Same as other digital encoder attributes defined above
8882   UCHAR ucPadding[1];
8883 }ATOM_ENCODER_DIGITAL_ATTRIBUTE;
8884 
8885 typedef union _ATOM_ENCODER_ATTRIBUTE
8886 {
8887   ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
8888   ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
8889 }ATOM_ENCODER_ATTRIBUTE;
8890 
8891 
8892 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS
8893 {
8894   USHORT usPixelClock;
8895   USHORT usEncoderID;
8896   UCHAR  ucDeviceType;                                    //Use ATOM_DEVICE_xxx1_Index to indicate device type only.
8897   UCHAR  ucAction;                                          //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
8898   ATOM_ENCODER_ATTRIBUTE usDevAttr;
8899 }DVO_ENCODER_CONTROL_PARAMETERS;
8900 
8901 typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION
8902 {
8903   DVO_ENCODER_CONTROL_PARAMETERS    sDVOEncoder;
8904   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION      sReserved;     //Caller doesn't need to init this portion
8905 }DVO_ENCODER_CONTROL_PS_ALLOCATION;
8906 
8907 
8908 #define ATOM_XTMDS_ASIC_SI164_ID        1
8909 #define ATOM_XTMDS_ASIC_SI178_ID        2
8910 #define ATOM_XTMDS_ASIC_TFP513_ID       3
8911 #define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
8912 #define ATOM_XTMDS_SUPPORTED_DUALLINK   0x00000002
8913 #define ATOM_XTMDS_MVPU_FPGA            0x00000004
8914 
8915 
8916 typedef struct _ATOM_XTMDS_INFO
8917 {
8918   ATOM_COMMON_TABLE_HEADER   sHeader;
8919   USHORT                     usSingleLinkMaxFrequency;
8920   ATOM_I2C_ID_CONFIG_ACCESS  sucI2cId;           //Point the ID on which I2C is used to control external chip
8921   UCHAR                      ucXtransimitterID;
8922   UCHAR                      ucSupportedLink;    // Bit field, bit0=1, single link supported;bit1=1,dual link supported
8923   UCHAR                      ucSequnceAlterID;   // Even with the same external TMDS asic, it's possible that the program seqence alters
8924                                                  // due to design. This ID is used to alert driver that the sequence is not "standard"!
8925   UCHAR                      ucMasterAddress;    // Address to control Master xTMDS Chip
8926   UCHAR                      ucSlaveAddress;     // Address to control Slave xTMDS Chip
8927 }ATOM_XTMDS_INFO;
8928 
8929 typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS
8930 {
8931   UCHAR ucEnable;                     // ATOM_ENABLE=On or ATOM_DISABLE=Off
8932   UCHAR ucDevice;                     // ATOM_DEVICE_DFP1_INDEX....
8933   UCHAR ucPadding[2];
8934 }DFP_DPMS_STATUS_CHANGE_PARAMETERS;
8935 
8936 /****************************Legacy Power Play Table Definitions **********************/
8937 
8938 //Definitions for ulPowerPlayMiscInfo
8939 #define ATOM_PM_MISCINFO_SPLIT_CLOCK                     0x00000000L
8940 #define ATOM_PM_MISCINFO_USING_MCLK_SRC                  0x00000001L
8941 #define ATOM_PM_MISCINFO_USING_SCLK_SRC                  0x00000002L
8942 
8943 #define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT            0x00000004L
8944 #define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH        0x00000008L
8945 
8946 #define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN             0x00000010L
8947 
8948 #define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN          0x00000020L
8949 #define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN          0x00000040L
8950 #define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE                 0x00000080L  //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program
8951 
8952 #define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN      0x00000100L
8953 #define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN         0x00000200L
8954 #define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN              0x00000400L
8955 #define ATOM_PM_MISCINFO_LOAD_BALANCE_EN                 0x00000800L
8956 #define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE     0x00001000L
8957 #define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
8958 #define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE            0x00004000L
8959 
8960 #define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE             0x00008000L
8961 #define ATOM_PM_MISCINFO_OVER_CLOCK_MODE                 0x00010000L
8962 #define ATOM_PM_MISCINFO_OVER_DRIVE_MODE                 0x00020000L
8963 #define ATOM_PM_MISCINFO_POWER_SAVING_MODE               0x00040000L
8964 #define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE              0x00080000L
8965 
8966 #define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK           0x00300000L  //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved
8967 #define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT          20
8968 
8969 #define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE                 0x00400000L
8970 #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2      0x00800000L
8971 #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4      0x01000000L
8972 #define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN            0x02000000L  //When set, Dynamic
8973 #define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN        0x04000000L  //When set, Dynamic
8974 #define ATOM_PM_MISCINFO_3D_ACCELERATION_EN              0x08000000L  //When set, This mode is for acceleated 3D mode
8975 
8976 #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK   0x70000000L  //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks)
8977 #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT  28
8978 #define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS                0x80000000L
8979 
8980 #define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE            0x00000001L
8981 #define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT          0x00000002L
8982 #define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN           0x00000004L
8983 #define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO            0x00000008L
8984 #define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE              0x00000010L
8985 #define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN       0x00000020L
8986 #define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE         0x00000040L  //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption.
8987                                                                       //If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback
8988 #define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC                0x00000080L
8989 #define ATOM_PM_MISCINFO2_STUTTER_MODE_EN                0x00000100L
8990 #define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE               0x00000200L
8991 
8992 //ucTableFormatRevision=1
8993 //ucTableContentRevision=1
8994 typedef struct  _ATOM_POWERMODE_INFO
8995 {
8996   ULONG     ulMiscInfo;                 //The power level should be arranged in ascending order
8997   ULONG     ulReserved1;                // must set to 0
8998   ULONG     ulReserved2;                // must set to 0
8999   USHORT    usEngineClock;
9000   USHORT    usMemoryClock;
9001   UCHAR     ucVoltageDropIndex;         // index to GPIO table
9002   UCHAR     ucSelectedPanel_RefreshRate;// panel refresh rate
9003   UCHAR     ucMinTemperature;
9004   UCHAR     ucMaxTemperature;
9005   UCHAR     ucNumPciELanes;             // number of PCIE lanes
9006 }ATOM_POWERMODE_INFO;
9007 
9008 //ucTableFormatRevision=2
9009 //ucTableContentRevision=1
9010 typedef struct  _ATOM_POWERMODE_INFO_V2
9011 {
9012   ULONG     ulMiscInfo;                 //The power level should be arranged in ascending order
9013   ULONG     ulMiscInfo2;
9014   ULONG     ulEngineClock;
9015   ULONG     ulMemoryClock;
9016   UCHAR     ucVoltageDropIndex;         // index to GPIO table
9017   UCHAR     ucSelectedPanel_RefreshRate;// panel refresh rate
9018   UCHAR     ucMinTemperature;
9019   UCHAR     ucMaxTemperature;
9020   UCHAR     ucNumPciELanes;             // number of PCIE lanes
9021 }ATOM_POWERMODE_INFO_V2;
9022 
9023 //ucTableFormatRevision=2
9024 //ucTableContentRevision=2
9025 typedef struct  _ATOM_POWERMODE_INFO_V3
9026 {
9027   ULONG     ulMiscInfo;                 //The power level should be arranged in ascending order
9028   ULONG     ulMiscInfo2;
9029   ULONG     ulEngineClock;
9030   ULONG     ulMemoryClock;
9031   UCHAR     ucVoltageDropIndex;         // index to Core (VDDC) votage table
9032   UCHAR     ucSelectedPanel_RefreshRate;// panel refresh rate
9033   UCHAR     ucMinTemperature;
9034   UCHAR     ucMaxTemperature;
9035   UCHAR     ucNumPciELanes;             // number of PCIE lanes
9036   UCHAR     ucVDDCI_VoltageDropIndex;   // index to VDDCI votage table
9037 }ATOM_POWERMODE_INFO_V3;
9038 
9039 
9040 #define ATOM_MAX_NUMBEROF_POWER_BLOCK  8
9041 
9042 #define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN            0x01
9043 #define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE         0x02
9044 
9045 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63      0x01
9046 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032   0x02
9047 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030   0x03
9048 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649   0x04
9049 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64      0x05
9050 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375    0x06
9051 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512   0x07   // Andigilog
9052 
9053 
9054 typedef struct  _ATOM_POWERPLAY_INFO
9055 {
9056   ATOM_COMMON_TABLE_HEADER   sHeader;
9057   UCHAR    ucOverdriveThermalController;
9058   UCHAR    ucOverdriveI2cLine;
9059   UCHAR    ucOverdriveIntBitmap;
9060   UCHAR    ucOverdriveControllerAddress;
9061   UCHAR    ucSizeOfPowerModeEntry;
9062   UCHAR    ucNumOfPowerModeEntries;
9063   ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
9064 }ATOM_POWERPLAY_INFO;
9065 
9066 typedef struct  _ATOM_POWERPLAY_INFO_V2
9067 {
9068   ATOM_COMMON_TABLE_HEADER   sHeader;
9069   UCHAR    ucOverdriveThermalController;
9070   UCHAR    ucOverdriveI2cLine;
9071   UCHAR    ucOverdriveIntBitmap;
9072   UCHAR    ucOverdriveControllerAddress;
9073   UCHAR    ucSizeOfPowerModeEntry;
9074   UCHAR    ucNumOfPowerModeEntries;
9075   ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
9076 }ATOM_POWERPLAY_INFO_V2;
9077 
9078 typedef struct  _ATOM_POWERPLAY_INFO_V3
9079 {
9080   ATOM_COMMON_TABLE_HEADER   sHeader;
9081   UCHAR    ucOverdriveThermalController;
9082   UCHAR    ucOverdriveI2cLine;
9083   UCHAR    ucOverdriveIntBitmap;
9084   UCHAR    ucOverdriveControllerAddress;
9085   UCHAR    ucSizeOfPowerModeEntry;
9086   UCHAR    ucNumOfPowerModeEntries;
9087   ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
9088 }ATOM_POWERPLAY_INFO_V3;
9089 
9090 
9091 
9092 /**************************************************************************/
9093 
9094 
9095 // Following definitions are for compatiblity issue in different SW components.
9096 #define ATOM_MASTER_DATA_TABLE_REVISION   0x01
9097 #define Object_Info                       Object_Header
9098 #define AdjustARB_SEQ                     MC_InitParameter
9099 #define VRAM_GPIO_DetectionInfo           VoltageObjectInfo
9100 #define ASIC_VDDCI_Info                   ASIC_ProfilingInfo
9101 #define ASIC_MVDDQ_Info                   MemoryTrainingInfo
9102 #define SS_Info                           PPLL_SS_Info
9103 #define ASIC_MVDDC_Info                   ASIC_InternalSS_Info
9104 #define DispDevicePriorityInfo            SaveRestoreInfo
9105 #define DispOutInfo                       TV_VideoMode
9106 
9107 
9108 #define ATOM_ENCODER_OBJECT_TABLE         ATOM_OBJECT_TABLE
9109 #define ATOM_CONNECTOR_OBJECT_TABLE       ATOM_OBJECT_TABLE
9110 
9111 //New device naming, remove them when both DAL/VBIOS is ready
9112 #define DFP2I_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
9113 #define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
9114 
9115 #define DFP1X_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
9116 #define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
9117 
9118 #define DFP1I_OUTPUT_CONTROL_PARAMETERS    DFP1_OUTPUT_CONTROL_PARAMETERS
9119 #define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
9120 
9121 #define ATOM_DEVICE_DFP1I_SUPPORT          ATOM_DEVICE_DFP1_SUPPORT
9122 #define ATOM_DEVICE_DFP1X_SUPPORT          ATOM_DEVICE_DFP2_SUPPORT
9123 
9124 #define ATOM_DEVICE_DFP1I_INDEX            ATOM_DEVICE_DFP1_INDEX
9125 #define ATOM_DEVICE_DFP1X_INDEX            ATOM_DEVICE_DFP2_INDEX
9126 
9127 #define ATOM_DEVICE_DFP2I_INDEX            0x00000009
9128 #define ATOM_DEVICE_DFP2I_SUPPORT          (0x1L << ATOM_DEVICE_DFP2I_INDEX)
9129 
9130 #define ATOM_S0_DFP1I                      ATOM_S0_DFP1
9131 #define ATOM_S0_DFP1X                      ATOM_S0_DFP2
9132 
9133 #define ATOM_S0_DFP2I                      0x00200000L
9134 #define ATOM_S0_DFP2Ib2                    0x20
9135 
9136 #define ATOM_S2_DFP1I_DPMS_STATE           ATOM_S2_DFP1_DPMS_STATE
9137 #define ATOM_S2_DFP1X_DPMS_STATE           ATOM_S2_DFP2_DPMS_STATE
9138 
9139 #define ATOM_S2_DFP2I_DPMS_STATE           0x02000000L
9140 #define ATOM_S2_DFP2I_DPMS_STATEb3         0x02
9141 
9142 #define ATOM_S3_DFP2I_ACTIVEb1             0x02
9143 
9144 #define ATOM_S3_DFP1I_ACTIVE               ATOM_S3_DFP1_ACTIVE
9145 #define ATOM_S3_DFP1X_ACTIVE               ATOM_S3_DFP2_ACTIVE
9146 
9147 #define ATOM_S3_DFP2I_ACTIVE               0x00000200L
9148 
9149 #define ATOM_S3_DFP1I_CRTC_ACTIVE          ATOM_S3_DFP1_CRTC_ACTIVE
9150 #define ATOM_S3_DFP1X_CRTC_ACTIVE          ATOM_S3_DFP2_CRTC_ACTIVE
9151 #define ATOM_S3_DFP2I_CRTC_ACTIVE          0x02000000L
9152 
9153 
9154 #define ATOM_S3_DFP2I_CRTC_ACTIVEb3        0x02
9155 #define ATOM_S5_DOS_REQ_DFP2Ib1            0x02
9156 
9157 #define ATOM_S5_DOS_REQ_DFP2I              0x0200
9158 #define ATOM_S6_ACC_REQ_DFP1I              ATOM_S6_ACC_REQ_DFP1
9159 #define ATOM_S6_ACC_REQ_DFP1X              ATOM_S6_ACC_REQ_DFP2
9160 
9161 #define ATOM_S6_ACC_REQ_DFP2Ib3            0x02
9162 #define ATOM_S6_ACC_REQ_DFP2I              0x02000000L
9163 
9164 #define TMDS1XEncoderControl               DVOEncoderControl
9165 #define DFP1XOutputControl                 DVOOutputControl
9166 
9167 #define ExternalDFPOutputControl           DFP1XOutputControl
9168 #define EnableExternalTMDS_Encoder         TMDS1XEncoderControl
9169 
9170 #define DFP1IOutputControl                 TMDSAOutputControl
9171 #define DFP2IOutputControl                 LVTMAOutputControl
9172 
9173 #define DAC1_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
9174 #define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
9175 
9176 #define DAC2_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
9177 #define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
9178 
9179 #define ucDac1Standard  ucDacStandard
9180 #define ucDac2Standard  ucDacStandard
9181 
9182 #define TMDS1EncoderControl TMDSAEncoderControl
9183 #define TMDS2EncoderControl LVTMAEncoderControl
9184 
9185 #define DFP1OutputControl   TMDSAOutputControl
9186 #define DFP2OutputControl   LVTMAOutputControl
9187 #define CRT1OutputControl   DAC1OutputControl
9188 #define CRT2OutputControl   DAC2OutputControl
9189 
9190 //These two lines will be removed for sure in a few days, will follow up with Michael V.
9191 #define EnableLVDS_SS   EnableSpreadSpectrumOnPPLL
9192 #define ENABLE_LVDS_SS_PARAMETERS_V3  ENABLE_SPREAD_SPECTRUM_ON_PPLL
9193 
9194 #define ATOM_S2_CRT1_DPMS_STATE         0x00010000L
9195 #define ATOM_S2_LCD1_DPMS_STATE           ATOM_S2_CRT1_DPMS_STATE
9196 #define ATOM_S2_TV1_DPMS_STATE          ATOM_S2_CRT1_DPMS_STATE
9197 #define ATOM_S2_DFP1_DPMS_STATE         ATOM_S2_CRT1_DPMS_STATE
9198 #define ATOM_S2_CRT2_DPMS_STATE         ATOM_S2_CRT1_DPMS_STATE
9199 
9200 #define ATOM_S6_ACC_REQ_TV2             0x00400000L
9201 #define ATOM_DEVICE_TV2_INDEX           0x00000006
9202 #define ATOM_DEVICE_TV2_SUPPORT         (0x1L << ATOM_DEVICE_TV2_INDEX)
9203 #define ATOM_S0_TV2                     0x00100000L
9204 #define ATOM_S3_TV2_ACTIVE              ATOM_S3_DFP6_ACTIVE
9205 #define ATOM_S3_TV2_CRTC_ACTIVE         ATOM_S3_DFP6_CRTC_ACTIVE
9206 
9207 /*********************************************************************************/
9208 
9209 #pragma pack() // BIOS data must use byte alignment
9210 
9211 #pragma pack(1)
9212 
9213 typedef struct _ATOM_HOLE_INFO
9214 {
9215 	USHORT	usOffset;		// offset of the hole ( from the start of the binary )
9216 	USHORT	usLength;		// length of the hole ( in bytes )
9217 }ATOM_HOLE_INFO;
9218 
9219 typedef struct _ATOM_SERVICE_DESCRIPTION
9220 {
9221    UCHAR   ucRevision;                               // Holes set revision
9222    UCHAR   ucAlgorithm;                              // Hash algorithm
9223    UCHAR   ucSignatureType;							 // Signature type ( 0 - no signature, 1 - test, 2 - production )
9224    UCHAR   ucReserved;
9225    USHORT  usSigOffset;							     // Signature offset ( from the start of the binary )
9226    USHORT  usSigLength;                              // Signature length
9227 }ATOM_SERVICE_DESCRIPTION;
9228 
9229 
9230 typedef struct _ATOM_SERVICE_INFO
9231 {
9232       ATOM_COMMON_TABLE_HEADER      asHeader;
9233       ATOM_SERVICE_DESCRIPTION		asDescr;
9234 	  UCHAR							ucholesNo;		// number of holes that follow
9235 	  ATOM_HOLE_INFO				holes[1];       // array of hole descriptions
9236 }ATOM_SERVICE_INFO;
9237 
9238 
9239 
9240 #pragma pack() // BIOS data must use byte alignment
9241 
9242 //
9243 // AMD ACPI Table
9244 //
9245 #pragma pack(1)
9246 
9247 typedef struct {
9248   ULONG Signature;
9249   ULONG TableLength;      //Length
9250   UCHAR Revision;
9251   UCHAR Checksum;
9252   UCHAR OemId[6];
9253   UCHAR OemTableId[8];    //UINT64  OemTableId;
9254   ULONG OemRevision;
9255   ULONG CreatorId;
9256   ULONG CreatorRevision;
9257 } AMD_ACPI_DESCRIPTION_HEADER;
9258 /*
9259 //EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h
9260 typedef struct {
9261   UINT32  Signature;       //0x0
9262   UINT32  Length;          //0x4
9263   UINT8   Revision;        //0x8
9264   UINT8   Checksum;        //0x9
9265   UINT8   OemId[6];        //0xA
9266   UINT64  OemTableId;      //0x10
9267   UINT32  OemRevision;     //0x18
9268   UINT32  CreatorId;       //0x1C
9269   UINT32  CreatorRevision; //0x20
9270 }EFI_ACPI_DESCRIPTION_HEADER;
9271 */
9272 typedef struct {
9273   AMD_ACPI_DESCRIPTION_HEADER SHeader;
9274   UCHAR TableUUID[16];    //0x24
9275   ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
9276   ULONG Lib1ImageOffset;  //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
9277   ULONG Reserved[4];      //0x3C
9278 }UEFI_ACPI_VFCT;
9279 
9280 typedef struct {
9281   ULONG  PCIBus;          //0x4C
9282   ULONG  PCIDevice;       //0x50
9283   ULONG  PCIFunction;     //0x54
9284   USHORT VendorID;        //0x58
9285   USHORT DeviceID;        //0x5A
9286   USHORT SSVID;           //0x5C
9287   USHORT SSID;            //0x5E
9288   ULONG  Revision;        //0x60
9289   ULONG  ImageLength;     //0x64
9290 }VFCT_IMAGE_HEADER;
9291 
9292 
9293 typedef struct {
9294   VFCT_IMAGE_HEADER   VbiosHeader;
9295   UCHAR   VbiosContent[1];
9296 }GOP_VBIOS_CONTENT;
9297 
9298 typedef struct {
9299   VFCT_IMAGE_HEADER   Lib1Header;
9300   UCHAR   Lib1Content[1];
9301 }GOP_LIB1_CONTENT;
9302 
9303 #pragma pack()
9304 
9305 
9306 #endif /* _ATOMBIOS_H */
9307 
9308 #include "pptable.h"
9309 
9310