1 /* 2 * Copyright 2019 Advanced Micro Devices, Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 20 * OTHER DEALINGS IN THE SOFTWARE. 21 * 22 * Authors: AMD 23 * 24 */ 25 26 #ifndef DMUB_CMD_H 27 #define DMUB_CMD_H 28 29 #if defined(_TEST_HARNESS) || defined(FPGA_USB4) 30 #include "dmub_fw_types.h" 31 #include "include_legacy/atomfirmware.h" 32 33 #if defined(_TEST_HARNESS) 34 #include <string.h> 35 #endif 36 #else 37 38 #include <asm/byteorder.h> 39 #include <linux/types.h> 40 #include <linux/string.h> 41 #include <linux/delay.h> 42 43 #include "atomfirmware.h" 44 45 #endif // defined(_TEST_HARNESS) || defined(FPGA_USB4) 46 47 //<DMUB_TYPES>================================================================== 48 /* Basic type definitions. */ 49 50 #define __forceinline inline 51 52 /** 53 * Flag from driver to indicate that ABM should be disabled gradually 54 * by slowly reversing all backlight programming and pixel compensation. 55 */ 56 #define SET_ABM_PIPE_GRADUALLY_DISABLE 0 57 58 /** 59 * Flag from driver to indicate that ABM should be disabled immediately 60 * and undo all backlight programming and pixel compensation. 61 */ 62 #define SET_ABM_PIPE_IMMEDIATELY_DISABLE 255 63 64 /** 65 * Flag from driver to indicate that ABM should be disabled immediately 66 * and keep the current backlight programming and pixel compensation. 67 */ 68 #define SET_ABM_PIPE_IMMEDIATE_KEEP_GAIN_DISABLE 254 69 70 /** 71 * Flag from driver to set the current ABM pipe index or ABM operating level. 72 */ 73 #define SET_ABM_PIPE_NORMAL 1 74 75 /** 76 * Number of ambient light levels in ABM algorithm. 77 */ 78 #define NUM_AMBI_LEVEL 5 79 80 /** 81 * Number of operating/aggression levels in ABM algorithm. 82 */ 83 #define NUM_AGGR_LEVEL 4 84 85 /** 86 * Number of segments in the gamma curve. 87 */ 88 #define NUM_POWER_FN_SEGS 8 89 90 /** 91 * Number of segments in the backlight curve. 92 */ 93 #define NUM_BL_CURVE_SEGS 16 94 95 /* Maximum number of SubVP streams */ 96 #define DMUB_MAX_SUBVP_STREAMS 2 97 98 /* Define max FPO streams as 4 for now. Current implementation today 99 * only supports 1, but could be more in the future. Reduce array 100 * size to ensure the command size remains less than 64 bytes if 101 * adding new fields. 102 */ 103 #define DMUB_MAX_FPO_STREAMS 4 104 105 /* Maximum number of streams on any ASIC. */ 106 #define DMUB_MAX_STREAMS 6 107 108 /* Maximum number of planes on any ASIC. */ 109 #define DMUB_MAX_PLANES 6 110 111 /* Trace buffer offset for entry */ 112 #define TRACE_BUFFER_ENTRY_OFFSET 16 113 114 /** 115 * Maximum number of dirty rects supported by FW. 116 */ 117 #define DMUB_MAX_DIRTY_RECTS 3 118 119 /** 120 * 121 * PSR control version legacy 122 */ 123 #define DMUB_CMD_PSR_CONTROL_VERSION_UNKNOWN 0x0 124 /** 125 * PSR control version with multi edp support 126 */ 127 #define DMUB_CMD_PSR_CONTROL_VERSION_1 0x1 128 129 130 /** 131 * ABM control version legacy 132 */ 133 #define DMUB_CMD_ABM_CONTROL_VERSION_UNKNOWN 0x0 134 135 /** 136 * ABM control version with multi edp support 137 */ 138 #define DMUB_CMD_ABM_CONTROL_VERSION_1 0x1 139 140 /** 141 * Physical framebuffer address location, 64-bit. 142 */ 143 #ifndef PHYSICAL_ADDRESS_LOC 144 #define PHYSICAL_ADDRESS_LOC union large_integer 145 #endif 146 147 /** 148 * OS/FW agnostic memcpy 149 */ 150 #ifndef dmub_memcpy 151 #define dmub_memcpy(dest, source, bytes) memcpy((dest), (source), (bytes)) 152 #endif 153 154 /** 155 * OS/FW agnostic memset 156 */ 157 #ifndef dmub_memset 158 #define dmub_memset(dest, val, bytes) memset((dest), (val), (bytes)) 159 #endif 160 161 #if defined(__cplusplus) 162 extern "C" { 163 #endif 164 165 /** 166 * OS/FW agnostic udelay 167 */ 168 #ifndef dmub_udelay 169 #define dmub_udelay(microseconds) udelay(microseconds) 170 #endif 171 172 #pragma pack(push, 1) 173 #define ABM_NUM_OF_ACE_SEGMENTS 5 174 175 union abm_flags { 176 struct { 177 /** 178 * @abm_enabled: Indicates if ABM is enabled. 179 */ 180 unsigned int abm_enabled : 1; 181 182 /** 183 * @disable_abm_requested: Indicates if driver has requested ABM to be disabled. 184 */ 185 unsigned int disable_abm_requested : 1; 186 187 /** 188 * @disable_abm_immediately: Indicates if driver has requested ABM to be disabled 189 * immediately. 190 */ 191 unsigned int disable_abm_immediately : 1; 192 193 /** 194 * @disable_abm_immediate_keep_gain: Indicates if driver has requested ABM 195 * to be disabled immediately and keep gain. 196 */ 197 unsigned int disable_abm_immediate_keep_gain : 1; 198 199 /** 200 * @fractional_pwm: Indicates if fractional duty cycle for backlight PWM is enabled. 201 */ 202 unsigned int fractional_pwm : 1; 203 204 /** 205 * @abm_gradual_bl_change: Indicates if algorithm has completed gradual adjustment 206 * of user backlight level. 207 */ 208 unsigned int abm_gradual_bl_change : 1; 209 } bitfields; 210 211 unsigned int u32All; 212 }; 213 214 struct abm_save_restore { 215 /** 216 * @flags: Misc. ABM flags. 217 */ 218 union abm_flags flags; 219 220 /** 221 * @pause: true: pause ABM and get state 222 * false: unpause ABM after setting state 223 */ 224 uint32_t pause; 225 226 /** 227 * @next_ace_slope: Next ACE slopes to be programmed in HW (u3.13) 228 */ 229 uint32_t next_ace_slope[ABM_NUM_OF_ACE_SEGMENTS]; 230 231 /** 232 * @next_ace_thresh: Next ACE thresholds to be programmed in HW (u10.6) 233 */ 234 uint32_t next_ace_thresh[ABM_NUM_OF_ACE_SEGMENTS]; 235 236 /** 237 * @next_ace_offset: Next ACE offsets to be programmed in HW (u10.6) 238 */ 239 uint32_t next_ace_offset[ABM_NUM_OF_ACE_SEGMENTS]; 240 241 242 /** 243 * @knee_threshold: Current x-position of ACE knee (u0.16). 244 */ 245 uint32_t knee_threshold; 246 /** 247 * @current_gain: Current backlight reduction (u16.16). 248 */ 249 uint32_t current_gain; 250 /** 251 * @curr_bl_level: Current actual backlight level converging to target backlight level. 252 */ 253 uint16_t curr_bl_level; 254 255 /** 256 * @curr_user_bl_level: Current nominal backlight level converging to level requested by user. 257 */ 258 uint16_t curr_user_bl_level; 259 260 }; 261 262 /** 263 * union dmub_addr - DMUB physical/virtual 64-bit address. 264 */ 265 union dmub_addr { 266 struct { 267 uint32_t low_part; /**< Lower 32 bits */ 268 uint32_t high_part; /**< Upper 32 bits */ 269 } u; /*<< Low/high bit access */ 270 uint64_t quad_part; /*<< 64 bit address */ 271 }; 272 #pragma pack(pop) 273 274 /** 275 * Dirty rect definition. 276 */ 277 struct dmub_rect { 278 /** 279 * Dirty rect x offset. 280 */ 281 uint32_t x; 282 283 /** 284 * Dirty rect y offset. 285 */ 286 uint32_t y; 287 288 /** 289 * Dirty rect width. 290 */ 291 uint32_t width; 292 293 /** 294 * Dirty rect height. 295 */ 296 uint32_t height; 297 }; 298 299 /** 300 * Flags that can be set by driver to change some PSR behaviour. 301 */ 302 union dmub_psr_debug_flags { 303 /** 304 * Debug flags. 305 */ 306 struct { 307 /** 308 * Enable visual confirm in FW. 309 */ 310 uint32_t visual_confirm : 1; 311 312 /** 313 * Force all selective updates to bw full frame updates. 314 */ 315 uint32_t force_full_frame_update : 1; 316 317 /** 318 * Use HW Lock Mgr object to do HW locking in FW. 319 */ 320 uint32_t use_hw_lock_mgr : 1; 321 322 /** 323 * Use TPS3 signal when restore main link. 324 */ 325 uint32_t force_wakeup_by_tps3 : 1; 326 327 /** 328 * Back to back flip, therefore cannot power down PHY 329 */ 330 uint32_t back_to_back_flip : 1; 331 332 } bitfields; 333 334 /** 335 * Union for debug flags. 336 */ 337 uint32_t u32All; 338 }; 339 340 /** 341 * Flags that can be set by driver to change some Replay behaviour. 342 */ 343 union replay_debug_flags { 344 struct { 345 /** 346 * Enable visual confirm in FW. 347 */ 348 uint32_t visual_confirm : 1; 349 350 /** 351 * @skip_crc: Set if need to skip CRC. 352 */ 353 uint32_t skip_crc : 1; 354 355 /** 356 * @force_link_power_on: Force disable ALPM control 357 */ 358 uint32_t force_link_power_on : 1; 359 360 /** 361 * @force_phy_power_on: Force phy power on 362 */ 363 uint32_t force_phy_power_on : 1; 364 365 /** 366 * @timing_resync_disabled: Disabled Replay normal sleep mode timing resync 367 */ 368 uint32_t timing_resync_disabled : 1; 369 370 /** 371 * @skip_crtc_disabled: CRTC disable skipped 372 */ 373 uint32_t skip_crtc_disabled : 1; 374 375 /** 376 * @force_defer_one_frame_update: Force defer one frame update in ultra sleep mode 377 */ 378 uint32_t force_defer_one_frame_update : 1; 379 /** 380 * @disable_delay_alpm_on: Force disable delay alpm on 381 */ 382 uint32_t disable_delay_alpm_on : 1; 383 /** 384 * @disable_desync_error_check: Force disable desync error check 385 */ 386 uint32_t disable_desync_error_check : 1; 387 /** 388 * @disable_desync_error_check: Force disable desync error check 389 */ 390 uint32_t disable_dmub_save_restore : 1; 391 392 uint32_t reserved : 22; 393 } bitfields; 394 395 uint32_t u32All; 396 }; 397 398 union replay_hw_flags { 399 struct { 400 /** 401 * @allow_alpm_fw_standby_mode: To indicate whether the 402 * ALPM FW standby mode is allowed 403 */ 404 uint32_t allow_alpm_fw_standby_mode : 1; 405 406 /* 407 * @dsc_enable_status: DSC enable status in driver 408 */ 409 uint32_t dsc_enable_status : 1; 410 411 /** 412 * @fec_enable_status: receive fec enable/disable status from driver 413 */ 414 uint32_t fec_enable_status : 1; 415 416 /* 417 * @smu_optimizations_en: SMU power optimization. 418 * Only when active display is Replay capable and display enters Replay. 419 * Trigger interrupt to SMU to powerup/down. 420 */ 421 uint32_t smu_optimizations_en : 1; 422 423 /** 424 * @otg_powered_down: Flag to keep track of OTG power state. 425 */ 426 uint32_t otg_powered_down : 1; 427 428 /** 429 * @phy_power_state: Indicates current phy power state 430 */ 431 uint32_t phy_power_state : 1; 432 433 /** 434 * @link_power_state: Indicates current link power state 435 */ 436 uint32_t link_power_state : 1; 437 /** 438 * Use TPS3 signal when restore main link. 439 */ 440 uint32_t force_wakeup_by_tps3 : 1; 441 } bitfields; 442 443 uint32_t u32All; 444 }; 445 446 /** 447 * DMUB visual confirm color 448 */ 449 struct dmub_feature_caps { 450 /** 451 * Max PSR version supported by FW. 452 */ 453 uint8_t psr; 454 uint8_t fw_assisted_mclk_switch; 455 uint8_t reserved[4]; 456 uint8_t subvp_psr_support; 457 uint8_t gecc_enable; 458 }; 459 460 struct dmub_visual_confirm_color { 461 /** 462 * Maximum 10 bits color value 463 */ 464 uint16_t color_r_cr; 465 uint16_t color_g_y; 466 uint16_t color_b_cb; 467 uint16_t panel_inst; 468 }; 469 470 #if defined(__cplusplus) 471 } 472 #endif 473 474 //============================================================================== 475 //</DMUB_TYPES>================================================================= 476 //============================================================================== 477 //< DMUB_META>================================================================== 478 //============================================================================== 479 #pragma pack(push, 1) 480 481 /* Magic value for identifying dmub_fw_meta_info */ 482 #define DMUB_FW_META_MAGIC 0x444D5542 483 484 /* Offset from the end of the file to the dmub_fw_meta_info */ 485 #define DMUB_FW_META_OFFSET 0x24 486 487 /** 488 * struct dmub_fw_meta_info - metadata associated with fw binary 489 * 490 * NOTE: This should be considered a stable API. Fields should 491 * not be repurposed or reordered. New fields should be 492 * added instead to extend the structure. 493 * 494 * @magic_value: magic value identifying DMUB firmware meta info 495 * @fw_region_size: size of the firmware state region 496 * @trace_buffer_size: size of the tracebuffer region 497 * @fw_version: the firmware version information 498 * @dal_fw: 1 if the firmware is DAL 499 */ 500 struct dmub_fw_meta_info { 501 uint32_t magic_value; /**< magic value identifying DMUB firmware meta info */ 502 uint32_t fw_region_size; /**< size of the firmware state region */ 503 uint32_t trace_buffer_size; /**< size of the tracebuffer region */ 504 uint32_t fw_version; /**< the firmware version information */ 505 uint8_t dal_fw; /**< 1 if the firmware is DAL */ 506 uint8_t reserved[3]; /**< padding bits */ 507 }; 508 509 /** 510 * union dmub_fw_meta - ensures that dmub_fw_meta_info remains 64 bytes 511 */ 512 union dmub_fw_meta { 513 struct dmub_fw_meta_info info; /**< metadata info */ 514 uint8_t reserved[64]; /**< padding bits */ 515 }; 516 517 #pragma pack(pop) 518 519 //============================================================================== 520 //< DMUB Trace Buffer>================================================================ 521 //============================================================================== 522 /** 523 * dmub_trace_code_t - firmware trace code, 32-bits 524 */ 525 typedef uint32_t dmub_trace_code_t; 526 527 /** 528 * struct dmcub_trace_buf_entry - Firmware trace entry 529 */ 530 struct dmcub_trace_buf_entry { 531 dmub_trace_code_t trace_code; /**< trace code for the event */ 532 uint32_t tick_count; /**< the tick count at time of trace */ 533 uint32_t param0; /**< trace defined parameter 0 */ 534 uint32_t param1; /**< trace defined parameter 1 */ 535 }; 536 537 //============================================================================== 538 //< DMUB_STATUS>================================================================ 539 //============================================================================== 540 541 /** 542 * DMCUB scratch registers can be used to determine firmware status. 543 * Current scratch register usage is as follows: 544 * 545 * SCRATCH0: FW Boot Status register 546 * SCRATCH5: LVTMA Status Register 547 * SCRATCH15: FW Boot Options register 548 */ 549 550 /** 551 * union dmub_fw_boot_status - Status bit definitions for SCRATCH0. 552 */ 553 union dmub_fw_boot_status { 554 struct { 555 uint32_t dal_fw : 1; /**< 1 if DAL FW */ 556 uint32_t mailbox_rdy : 1; /**< 1 if mailbox ready */ 557 uint32_t optimized_init_done : 1; /**< 1 if optimized init done */ 558 uint32_t restore_required : 1; /**< 1 if driver should call restore */ 559 uint32_t defer_load : 1; /**< 1 if VBIOS data is deferred programmed */ 560 uint32_t fams_enabled : 1; /**< 1 if VBIOS data is deferred programmed */ 561 uint32_t detection_required: 1; /**< if detection need to be triggered by driver */ 562 uint32_t hw_power_init_done: 1; /**< 1 if hw power init is completed */ 563 } bits; /**< status bits */ 564 uint32_t all; /**< 32-bit access to status bits */ 565 }; 566 567 /** 568 * enum dmub_fw_boot_status_bit - Enum bit definitions for SCRATCH0. 569 */ 570 enum dmub_fw_boot_status_bit { 571 DMUB_FW_BOOT_STATUS_BIT_DAL_FIRMWARE = (1 << 0), /**< 1 if DAL FW */ 572 DMUB_FW_BOOT_STATUS_BIT_MAILBOX_READY = (1 << 1), /**< 1 if mailbox ready */ 573 DMUB_FW_BOOT_STATUS_BIT_OPTIMIZED_INIT_DONE = (1 << 2), /**< 1 if init done */ 574 DMUB_FW_BOOT_STATUS_BIT_RESTORE_REQUIRED = (1 << 3), /**< 1 if driver should call restore */ 575 DMUB_FW_BOOT_STATUS_BIT_DEFERRED_LOADED = (1 << 4), /**< 1 if VBIOS data is deferred programmed */ 576 DMUB_FW_BOOT_STATUS_BIT_FAMS_ENABLED = (1 << 5), /**< 1 if FAMS is enabled*/ 577 DMUB_FW_BOOT_STATUS_BIT_DETECTION_REQUIRED = (1 << 6), /**< 1 if detection need to be triggered by driver*/ 578 DMUB_FW_BOOT_STATUS_BIT_HW_POWER_INIT_DONE = (1 << 7), /**< 1 if hw power init is completed */ 579 }; 580 581 /* Register bit definition for SCRATCH5 */ 582 union dmub_lvtma_status { 583 struct { 584 uint32_t psp_ok : 1; 585 uint32_t edp_on : 1; 586 uint32_t reserved : 30; 587 } bits; 588 uint32_t all; 589 }; 590 591 enum dmub_lvtma_status_bit { 592 DMUB_LVTMA_STATUS_BIT_PSP_OK = (1 << 0), 593 DMUB_LVTMA_STATUS_BIT_EDP_ON = (1 << 1), 594 }; 595 596 enum dmub_ips_disable_type { 597 DMUB_IPS_DISABLE_IPS1 = 1, 598 DMUB_IPS_DISABLE_IPS2 = 2, 599 DMUB_IPS_DISABLE_IPS2_Z10 = 3, 600 }; 601 602 /** 603 * union dmub_fw_boot_options - Boot option definitions for SCRATCH14 604 */ 605 union dmub_fw_boot_options { 606 struct { 607 uint32_t pemu_env : 1; /**< 1 if PEMU */ 608 uint32_t fpga_env : 1; /**< 1 if FPGA */ 609 uint32_t optimized_init : 1; /**< 1 if optimized init */ 610 uint32_t skip_phy_access : 1; /**< 1 if PHY access should be skipped */ 611 uint32_t disable_clk_gate: 1; /**< 1 if clock gating should be disabled */ 612 uint32_t skip_phy_init_panel_sequence: 1; /**< 1 to skip panel init seq */ 613 uint32_t z10_disable: 1; /**< 1 to disable z10 */ 614 uint32_t enable_dpia: 1; /**< 1 if DPIA should be enabled */ 615 uint32_t invalid_vbios_data: 1; /**< 1 if VBIOS data table is invalid */ 616 uint32_t dpia_supported: 1; /**< 1 if DPIA is supported on this platform */ 617 uint32_t sel_mux_phy_c_d_phy_f_g: 1; /**< 1 if PHYF/PHYG should be enabled */ 618 /**< 1 if all root clock gating is enabled and low power memory is enabled*/ 619 uint32_t power_optimization: 1; 620 uint32_t diag_env: 1; /* 1 if diagnostic environment */ 621 uint32_t gpint_scratch8: 1; /* 1 if GPINT is in scratch8*/ 622 uint32_t usb4_cm_version: 1; /**< 1 CM support */ 623 uint32_t dpia_hpd_int_enable_supported: 1; /* 1 if dpia hpd int enable supported */ 624 uint32_t usb4_dpia_bw_alloc_supported: 1; /* 1 if USB4 dpia BW allocation supported */ 625 uint32_t disable_clk_ds: 1; /* 1 if disallow dispclk_ds and dppclk_ds*/ 626 uint32_t disable_timeout_recovery : 1; /* 1 if timeout recovery should be disabled */ 627 uint32_t ips_pg_disable: 1; /* 1 to disable ONO domains power gating*/ 628 uint32_t ips_disable: 2; /* options to disable ips support*/ 629 uint32_t reserved : 10; /**< reserved */ 630 } bits; /**< boot bits */ 631 uint32_t all; /**< 32-bit access to bits */ 632 }; 633 634 enum dmub_fw_boot_options_bit { 635 DMUB_FW_BOOT_OPTION_BIT_PEMU_ENV = (1 << 0), /**< 1 if PEMU */ 636 DMUB_FW_BOOT_OPTION_BIT_FPGA_ENV = (1 << 1), /**< 1 if FPGA */ 637 DMUB_FW_BOOT_OPTION_BIT_OPTIMIZED_INIT_DONE = (1 << 2), /**< 1 if optimized init done */ 638 }; 639 640 //============================================================================== 641 //</DMUB_STATUS>================================================================ 642 //============================================================================== 643 //< DMUB_VBIOS>================================================================= 644 //============================================================================== 645 646 /* 647 * enum dmub_cmd_vbios_type - VBIOS commands. 648 * 649 * Command IDs should be treated as stable ABI. 650 * Do not reuse or modify IDs. 651 */ 652 enum dmub_cmd_vbios_type { 653 /** 654 * Configures the DIG encoder. 655 */ 656 DMUB_CMD__VBIOS_DIGX_ENCODER_CONTROL = 0, 657 /** 658 * Controls the PHY. 659 */ 660 DMUB_CMD__VBIOS_DIG1_TRANSMITTER_CONTROL = 1, 661 /** 662 * Sets the pixel clock/symbol clock. 663 */ 664 DMUB_CMD__VBIOS_SET_PIXEL_CLOCK = 2, 665 /** 666 * Enables or disables power gating. 667 */ 668 DMUB_CMD__VBIOS_ENABLE_DISP_POWER_GATING = 3, 669 /** 670 * Controls embedded panels. 671 */ 672 DMUB_CMD__VBIOS_LVTMA_CONTROL = 15, 673 /** 674 * Query DP alt status on a transmitter. 675 */ 676 DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT = 26, 677 /** 678 * Controls domain power gating 679 */ 680 DMUB_CMD__VBIOS_DOMAIN_CONTROL = 28, 681 }; 682 683 //============================================================================== 684 //</DMUB_VBIOS>================================================================= 685 //============================================================================== 686 //< DMUB_GPINT>================================================================= 687 //============================================================================== 688 689 /** 690 * The shifts and masks below may alternatively be used to format and read 691 * the command register bits. 692 */ 693 694 #define DMUB_GPINT_DATA_PARAM_MASK 0xFFFF 695 #define DMUB_GPINT_DATA_PARAM_SHIFT 0 696 697 #define DMUB_GPINT_DATA_COMMAND_CODE_MASK 0xFFF 698 #define DMUB_GPINT_DATA_COMMAND_CODE_SHIFT 16 699 700 #define DMUB_GPINT_DATA_STATUS_MASK 0xF 701 #define DMUB_GPINT_DATA_STATUS_SHIFT 28 702 703 /** 704 * Command responses. 705 */ 706 707 /** 708 * Return response for DMUB_GPINT__STOP_FW command. 709 */ 710 #define DMUB_GPINT__STOP_FW_RESPONSE 0xDEADDEAD 711 712 /** 713 * union dmub_gpint_data_register - Format for sending a command via the GPINT. 714 */ 715 union dmub_gpint_data_register { 716 struct { 717 uint32_t param : 16; /**< 16-bit parameter */ 718 uint32_t command_code : 12; /**< GPINT command */ 719 uint32_t status : 4; /**< Command status bit */ 720 } bits; /**< GPINT bit access */ 721 uint32_t all; /**< GPINT 32-bit access */ 722 }; 723 724 /* 725 * enum dmub_gpint_command - GPINT command to DMCUB FW 726 * 727 * Command IDs should be treated as stable ABI. 728 * Do not reuse or modify IDs. 729 */ 730 enum dmub_gpint_command { 731 /** 732 * Invalid command, ignored. 733 */ 734 DMUB_GPINT__INVALID_COMMAND = 0, 735 /** 736 * DESC: Queries the firmware version. 737 * RETURN: Firmware version. 738 */ 739 DMUB_GPINT__GET_FW_VERSION = 1, 740 /** 741 * DESC: Halts the firmware. 742 * RETURN: DMUB_GPINT__STOP_FW_RESPONSE (0xDEADDEAD) when halted 743 */ 744 DMUB_GPINT__STOP_FW = 2, 745 /** 746 * DESC: Get PSR state from FW. 747 * RETURN: PSR state enum. This enum may need to be converted to the legacy PSR state value. 748 */ 749 DMUB_GPINT__GET_PSR_STATE = 7, 750 /** 751 * DESC: Notifies DMCUB of the currently active streams. 752 * ARGS: Stream mask, 1 bit per active stream index. 753 */ 754 DMUB_GPINT__IDLE_OPT_NOTIFY_STREAM_MASK = 8, 755 /** 756 * DESC: Start PSR residency counter. Stop PSR resdiency counter and get value. 757 * ARGS: We can measure residency from various points. The argument will specify the residency mode. 758 * By default, it is measured from after we powerdown the PHY, to just before we powerup the PHY. 759 * RETURN: PSR residency in milli-percent. 760 */ 761 DMUB_GPINT__PSR_RESIDENCY = 9, 762 763 /** 764 * DESC: Get REPLAY state from FW. 765 * RETURN: REPLAY state enum. This enum may need to be converted to the legacy REPLAY state value. 766 */ 767 DMUB_GPINT__GET_REPLAY_STATE = 13, 768 769 /** 770 * DESC: Start REPLAY residency counter. Stop REPLAY resdiency counter and get value. 771 * ARGS: We can measure residency from various points. The argument will specify the residency mode. 772 * By default, it is measured from after we powerdown the PHY, to just before we powerup the PHY. 773 * RETURN: REPLAY residency in milli-percent. 774 */ 775 DMUB_GPINT__REPLAY_RESIDENCY = 14, 776 777 778 /** 779 * DESC: Notifies DMCUB detection is done so detection required can be cleared. 780 */ 781 DMUB_GPINT__NOTIFY_DETECTION_DONE = 12, 782 /** 783 * DESC: Updates the trace buffer lower 32-bit mask. 784 * ARGS: The new mask 785 * RETURN: Lower 32-bit mask. 786 */ 787 DMUB_GPINT__UPDATE_TRACE_BUFFER_MASK = 101, 788 /** 789 * DESC: Updates the trace buffer lower 32-bit mask. 790 * ARGS: The new mask 791 * RETURN: Lower 32-bit mask. 792 */ 793 DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD0 = 102, 794 /** 795 * DESC: Updates the trace buffer mask bi0~bit15. 796 * ARGS: The new mask 797 * RETURN: Lower 32-bit mask. 798 */ 799 DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD1 = 103, 800 }; 801 802 /** 803 * INBOX0 generic command definition 804 */ 805 union dmub_inbox0_cmd_common { 806 struct { 807 uint32_t command_code: 8; /**< INBOX0 command code */ 808 uint32_t param: 24; /**< 24-bit parameter */ 809 } bits; 810 uint32_t all; 811 }; 812 813 /** 814 * INBOX0 hw_lock command definition 815 */ 816 union dmub_inbox0_cmd_lock_hw { 817 struct { 818 uint32_t command_code: 8; 819 820 /* NOTE: Must be have enough bits to match: enum hw_lock_client */ 821 uint32_t hw_lock_client: 2; 822 823 /* NOTE: Below fields must match with: struct dmub_hw_lock_inst_flags */ 824 uint32_t otg_inst: 3; 825 uint32_t opp_inst: 3; 826 uint32_t dig_inst: 3; 827 828 /* NOTE: Below fields must match with: union dmub_hw_lock_flags */ 829 uint32_t lock_pipe: 1; 830 uint32_t lock_cursor: 1; 831 uint32_t lock_dig: 1; 832 uint32_t triple_buffer_lock: 1; 833 834 uint32_t lock: 1; /**< Lock */ 835 uint32_t should_release: 1; /**< Release */ 836 uint32_t reserved: 7; /**< Reserved for extending more clients, HW, etc. */ 837 } bits; 838 uint32_t all; 839 }; 840 841 union dmub_inbox0_data_register { 842 union dmub_inbox0_cmd_common inbox0_cmd_common; 843 union dmub_inbox0_cmd_lock_hw inbox0_cmd_lock_hw; 844 }; 845 846 enum dmub_inbox0_command { 847 /** 848 * DESC: Invalid command, ignored. 849 */ 850 DMUB_INBOX0_CMD__INVALID_COMMAND = 0, 851 /** 852 * DESC: Notification to acquire/release HW lock 853 * ARGS: 854 */ 855 DMUB_INBOX0_CMD__HW_LOCK = 1, 856 }; 857 //============================================================================== 858 //</DMUB_GPINT>================================================================= 859 //============================================================================== 860 //< DMUB_CMD>=================================================================== 861 //============================================================================== 862 863 /** 864 * Size in bytes of each DMUB command. 865 */ 866 #define DMUB_RB_CMD_SIZE 64 867 868 /** 869 * Maximum number of items in the DMUB ringbuffer. 870 */ 871 #define DMUB_RB_MAX_ENTRY 128 872 873 /** 874 * Ringbuffer size in bytes. 875 */ 876 #define DMUB_RB_SIZE (DMUB_RB_CMD_SIZE * DMUB_RB_MAX_ENTRY) 877 878 /** 879 * REG_SET mask for reg offload. 880 */ 881 #define REG_SET_MASK 0xFFFF 882 883 /* 884 * enum dmub_cmd_type - DMUB inbox command. 885 * 886 * Command IDs should be treated as stable ABI. 887 * Do not reuse or modify IDs. 888 */ 889 enum dmub_cmd_type { 890 /** 891 * Invalid command. 892 */ 893 DMUB_CMD__NULL = 0, 894 /** 895 * Read modify write register sequence offload. 896 */ 897 DMUB_CMD__REG_SEQ_READ_MODIFY_WRITE = 1, 898 /** 899 * Field update register sequence offload. 900 */ 901 DMUB_CMD__REG_SEQ_FIELD_UPDATE_SEQ = 2, 902 /** 903 * Burst write sequence offload. 904 */ 905 DMUB_CMD__REG_SEQ_BURST_WRITE = 3, 906 /** 907 * Reg wait sequence offload. 908 */ 909 DMUB_CMD__REG_REG_WAIT = 4, 910 /** 911 * Workaround to avoid HUBP underflow during NV12 playback. 912 */ 913 DMUB_CMD__PLAT_54186_WA = 5, 914 /** 915 * Command type used to query FW feature caps. 916 */ 917 DMUB_CMD__QUERY_FEATURE_CAPS = 6, 918 /** 919 * Command type used to get visual confirm color. 920 */ 921 DMUB_CMD__GET_VISUAL_CONFIRM_COLOR = 8, 922 /** 923 * Command type used for all PSR commands. 924 */ 925 DMUB_CMD__PSR = 64, 926 /** 927 * Command type used for all MALL commands. 928 */ 929 DMUB_CMD__MALL = 65, 930 /** 931 * Command type used for all ABM commands. 932 */ 933 DMUB_CMD__ABM = 66, 934 /** 935 * Command type used to update dirty rects in FW. 936 */ 937 DMUB_CMD__UPDATE_DIRTY_RECT = 67, 938 /** 939 * Command type used to update cursor info in FW. 940 */ 941 DMUB_CMD__UPDATE_CURSOR_INFO = 68, 942 /** 943 * Command type used for HW locking in FW. 944 */ 945 DMUB_CMD__HW_LOCK = 69, 946 /** 947 * Command type used to access DP AUX. 948 */ 949 DMUB_CMD__DP_AUX_ACCESS = 70, 950 /** 951 * Command type used for OUTBOX1 notification enable 952 */ 953 DMUB_CMD__OUTBOX1_ENABLE = 71, 954 955 /** 956 * Command type used for all idle optimization commands. 957 */ 958 DMUB_CMD__IDLE_OPT = 72, 959 /** 960 * Command type used for all clock manager commands. 961 */ 962 DMUB_CMD__CLK_MGR = 73, 963 /** 964 * Command type used for all panel control commands. 965 */ 966 DMUB_CMD__PANEL_CNTL = 74, 967 /** 968 * Command type used for <TODO:description> 969 */ 970 DMUB_CMD__CAB_FOR_SS = 75, 971 972 DMUB_CMD__FW_ASSISTED_MCLK_SWITCH = 76, 973 974 /** 975 * Command type used for interfacing with DPIA. 976 */ 977 DMUB_CMD__DPIA = 77, 978 /** 979 * Command type used for EDID CEA parsing 980 */ 981 DMUB_CMD__EDID_CEA = 79, 982 /** 983 * Command type used for getting usbc cable ID 984 */ 985 DMUB_CMD_GET_USBC_CABLE_ID = 81, 986 /** 987 * Command type used to query HPD state. 988 */ 989 DMUB_CMD__QUERY_HPD_STATE = 82, 990 /** 991 * Command type used for all VBIOS interface commands. 992 */ 993 994 /** 995 * Command type used for all REPLAY commands. 996 */ 997 DMUB_CMD__REPLAY = 83, 998 999 /** 1000 * Command type used for all SECURE_DISPLAY commands. 1001 */ 1002 DMUB_CMD__SECURE_DISPLAY = 85, 1003 1004 /** 1005 * Command type used to set DPIA HPD interrupt state 1006 */ 1007 DMUB_CMD__DPIA_HPD_INT_ENABLE = 86, 1008 1009 DMUB_CMD__VBIOS = 128, 1010 }; 1011 1012 /** 1013 * enum dmub_out_cmd_type - DMUB outbox commands. 1014 */ 1015 enum dmub_out_cmd_type { 1016 /** 1017 * Invalid outbox command, ignored. 1018 */ 1019 DMUB_OUT_CMD__NULL = 0, 1020 /** 1021 * Command type used for DP AUX Reply data notification 1022 */ 1023 DMUB_OUT_CMD__DP_AUX_REPLY = 1, 1024 /** 1025 * Command type used for DP HPD event notification 1026 */ 1027 DMUB_OUT_CMD__DP_HPD_NOTIFY = 2, 1028 /** 1029 * Command type used for SET_CONFIG Reply notification 1030 */ 1031 DMUB_OUT_CMD__SET_CONFIG_REPLY = 3, 1032 /** 1033 * Command type used for USB4 DPIA notification 1034 */ 1035 DMUB_OUT_CMD__DPIA_NOTIFICATION = 5, 1036 }; 1037 1038 /* DMUB_CMD__DPIA command sub-types. */ 1039 enum dmub_cmd_dpia_type { 1040 DMUB_CMD__DPIA_DIG1_DPIA_CONTROL = 0, 1041 DMUB_CMD__DPIA_SET_CONFIG_ACCESS = 1, 1042 DMUB_CMD__DPIA_MST_ALLOC_SLOTS = 2, 1043 }; 1044 1045 /* DMUB_OUT_CMD__DPIA_NOTIFICATION command types. */ 1046 enum dmub_cmd_dpia_notification_type { 1047 DPIA_NOTIFY__BW_ALLOCATION = 0, 1048 }; 1049 1050 #pragma pack(push, 1) 1051 1052 /** 1053 * struct dmub_cmd_header - Common command header fields. 1054 */ 1055 struct dmub_cmd_header { 1056 unsigned int type : 8; /**< command type */ 1057 unsigned int sub_type : 8; /**< command sub type */ 1058 unsigned int ret_status : 1; /**< 1 if returned data, 0 otherwise */ 1059 unsigned int multi_cmd_pending : 1; /**< 1 if multiple commands chained together */ 1060 unsigned int reserved0 : 6; /**< reserved bits */ 1061 unsigned int payload_bytes : 6; /* payload excluding header - up to 60 bytes */ 1062 unsigned int reserved1 : 2; /**< reserved bits */ 1063 }; 1064 1065 /* 1066 * struct dmub_cmd_read_modify_write_sequence - Read modify write 1067 * 1068 * 60 payload bytes can hold up to 5 sets of read modify writes, 1069 * each take 3 dwords. 1070 * 1071 * number of sequences = header.payload_bytes / sizeof(struct dmub_cmd_read_modify_write_sequence) 1072 * 1073 * modify_mask = 0xffff'ffff means all fields are going to be updated. in this case 1074 * command parser will skip the read and we can use modify_mask = 0xffff'ffff as reg write 1075 */ 1076 struct dmub_cmd_read_modify_write_sequence { 1077 uint32_t addr; /**< register address */ 1078 uint32_t modify_mask; /**< modify mask */ 1079 uint32_t modify_value; /**< modify value */ 1080 }; 1081 1082 /** 1083 * Maximum number of ops in read modify write sequence. 1084 */ 1085 #define DMUB_READ_MODIFY_WRITE_SEQ__MAX 5 1086 1087 /** 1088 * struct dmub_cmd_read_modify_write_sequence - Read modify write command. 1089 */ 1090 struct dmub_rb_cmd_read_modify_write { 1091 struct dmub_cmd_header header; /**< command header */ 1092 /** 1093 * Read modify write sequence. 1094 */ 1095 struct dmub_cmd_read_modify_write_sequence seq[DMUB_READ_MODIFY_WRITE_SEQ__MAX]; 1096 }; 1097 1098 /* 1099 * Update a register with specified masks and values sequeunce 1100 * 1101 * 60 payload bytes can hold address + up to 7 sets of mask/value combo, each take 2 dword 1102 * 1103 * number of field update sequence = (header.payload_bytes - sizeof(addr)) / sizeof(struct read_modify_write_sequence) 1104 * 1105 * 1106 * USE CASE: 1107 * 1. auto-increment register where additional read would update pointer and produce wrong result 1108 * 2. toggle a bit without read in the middle 1109 */ 1110 1111 struct dmub_cmd_reg_field_update_sequence { 1112 uint32_t modify_mask; /**< 0xffff'ffff to skip initial read */ 1113 uint32_t modify_value; /**< value to update with */ 1114 }; 1115 1116 /** 1117 * Maximum number of ops in field update sequence. 1118 */ 1119 #define DMUB_REG_FIELD_UPDATE_SEQ__MAX 7 1120 1121 /** 1122 * struct dmub_rb_cmd_reg_field_update_sequence - Field update command. 1123 */ 1124 struct dmub_rb_cmd_reg_field_update_sequence { 1125 struct dmub_cmd_header header; /**< command header */ 1126 uint32_t addr; /**< register address */ 1127 /** 1128 * Field update sequence. 1129 */ 1130 struct dmub_cmd_reg_field_update_sequence seq[DMUB_REG_FIELD_UPDATE_SEQ__MAX]; 1131 }; 1132 1133 1134 /** 1135 * Maximum number of burst write values. 1136 */ 1137 #define DMUB_BURST_WRITE_VALUES__MAX 14 1138 1139 /* 1140 * struct dmub_rb_cmd_burst_write - Burst write 1141 * 1142 * support use case such as writing out LUTs. 1143 * 1144 * 60 payload bytes can hold up to 14 values to write to given address 1145 * 1146 * number of payload = header.payload_bytes / sizeof(struct read_modify_write_sequence) 1147 */ 1148 struct dmub_rb_cmd_burst_write { 1149 struct dmub_cmd_header header; /**< command header */ 1150 uint32_t addr; /**< register start address */ 1151 /** 1152 * Burst write register values. 1153 */ 1154 uint32_t write_values[DMUB_BURST_WRITE_VALUES__MAX]; 1155 }; 1156 1157 /** 1158 * struct dmub_rb_cmd_common - Common command header 1159 */ 1160 struct dmub_rb_cmd_common { 1161 struct dmub_cmd_header header; /**< command header */ 1162 /** 1163 * Padding to RB_CMD_SIZE 1164 */ 1165 uint8_t cmd_buffer[DMUB_RB_CMD_SIZE - sizeof(struct dmub_cmd_header)]; 1166 }; 1167 1168 /** 1169 * struct dmub_cmd_reg_wait_data - Register wait data 1170 */ 1171 struct dmub_cmd_reg_wait_data { 1172 uint32_t addr; /**< Register address */ 1173 uint32_t mask; /**< Mask for register bits */ 1174 uint32_t condition_field_value; /**< Value to wait for */ 1175 uint32_t time_out_us; /**< Time out for reg wait in microseconds */ 1176 }; 1177 1178 /** 1179 * struct dmub_rb_cmd_reg_wait - Register wait command 1180 */ 1181 struct dmub_rb_cmd_reg_wait { 1182 struct dmub_cmd_header header; /**< Command header */ 1183 struct dmub_cmd_reg_wait_data reg_wait; /**< Register wait data */ 1184 }; 1185 1186 /** 1187 * struct dmub_cmd_PLAT_54186_wa - Underflow workaround 1188 * 1189 * Reprograms surface parameters to avoid underflow. 1190 */ 1191 struct dmub_cmd_PLAT_54186_wa { 1192 uint32_t DCSURF_SURFACE_CONTROL; /**< reg value */ 1193 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH; /**< reg value */ 1194 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS; /**< reg value */ 1195 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH_C; /**< reg value */ 1196 uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_C; /**< reg value */ 1197 struct { 1198 uint8_t hubp_inst : 4; /**< HUBP instance */ 1199 uint8_t tmz_surface : 1; /**< TMZ enable or disable */ 1200 uint8_t immediate :1; /**< Immediate flip */ 1201 uint8_t vmid : 4; /**< VMID */ 1202 uint8_t grph_stereo : 1; /**< 1 if stereo */ 1203 uint32_t reserved : 21; /**< Reserved */ 1204 } flip_params; /**< Pageflip parameters */ 1205 uint32_t reserved[9]; /**< Reserved bits */ 1206 }; 1207 1208 /** 1209 * struct dmub_rb_cmd_PLAT_54186_wa - Underflow workaround command 1210 */ 1211 struct dmub_rb_cmd_PLAT_54186_wa { 1212 struct dmub_cmd_header header; /**< Command header */ 1213 struct dmub_cmd_PLAT_54186_wa flip; /**< Flip data */ 1214 }; 1215 1216 /** 1217 * struct dmub_rb_cmd_mall - MALL command data. 1218 */ 1219 struct dmub_rb_cmd_mall { 1220 struct dmub_cmd_header header; /**< Common command header */ 1221 union dmub_addr cursor_copy_src; /**< Cursor copy address */ 1222 union dmub_addr cursor_copy_dst; /**< Cursor copy destination */ 1223 uint32_t tmr_delay; /**< Timer delay */ 1224 uint32_t tmr_scale; /**< Timer scale */ 1225 uint16_t cursor_width; /**< Cursor width in pixels */ 1226 uint16_t cursor_pitch; /**< Cursor pitch in pixels */ 1227 uint16_t cursor_height; /**< Cursor height in pixels */ 1228 uint8_t cursor_bpp; /**< Cursor bits per pixel */ 1229 uint8_t debug_bits; /**< Debug bits */ 1230 1231 uint8_t reserved1; /**< Reserved bits */ 1232 uint8_t reserved2; /**< Reserved bits */ 1233 }; 1234 1235 /** 1236 * enum dmub_cmd_cab_type - CAB command data. 1237 */ 1238 enum dmub_cmd_cab_type { 1239 /** 1240 * No idle optimizations (i.e. no CAB) 1241 */ 1242 DMUB_CMD__CAB_NO_IDLE_OPTIMIZATION = 0, 1243 /** 1244 * No DCN requests for memory 1245 */ 1246 DMUB_CMD__CAB_NO_DCN_REQ = 1, 1247 /** 1248 * Fit surfaces in CAB (i.e. CAB enable) 1249 */ 1250 DMUB_CMD__CAB_DCN_SS_FIT_IN_CAB = 2, 1251 }; 1252 1253 /** 1254 * struct dmub_rb_cmd_cab - CAB command data. 1255 */ 1256 struct dmub_rb_cmd_cab_for_ss { 1257 struct dmub_cmd_header header; 1258 uint8_t cab_alloc_ways; /* total number of ways */ 1259 uint8_t debug_bits; /* debug bits */ 1260 }; 1261 1262 /** 1263 * Enum for indicating which MCLK switch mode per pipe 1264 */ 1265 enum mclk_switch_mode { 1266 NONE = 0, 1267 FPO = 1, 1268 SUBVP = 2, 1269 VBLANK = 3, 1270 }; 1271 1272 /* Per pipe struct which stores the MCLK switch mode 1273 * data to be sent to DMUB. 1274 * Named "v2" for now -- once FPO and SUBVP are fully merged 1275 * the type name can be updated 1276 */ 1277 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 { 1278 union { 1279 struct { 1280 uint32_t pix_clk_100hz; 1281 uint16_t main_vblank_start; 1282 uint16_t main_vblank_end; 1283 uint16_t mall_region_lines; 1284 uint16_t prefetch_lines; 1285 uint16_t prefetch_to_mall_start_lines; 1286 uint16_t processing_delay_lines; 1287 uint16_t htotal; // required to calculate line time for multi-display cases 1288 uint16_t vtotal; 1289 uint8_t main_pipe_index; 1290 uint8_t phantom_pipe_index; 1291 /* Since the microschedule is calculated in terms of OTG lines, 1292 * include any scaling factors to make sure when we get accurate 1293 * conversion when programming MALL_START_LINE (which is in terms 1294 * of HUBP lines). If 4K is being downscaled to 1080p, scale factor 1295 * is 1/2 (numerator = 1, denominator = 2). 1296 */ 1297 uint8_t scale_factor_numerator; 1298 uint8_t scale_factor_denominator; 1299 uint8_t is_drr; 1300 uint8_t main_split_pipe_index; 1301 uint8_t phantom_split_pipe_index; 1302 } subvp_data; 1303 1304 struct { 1305 uint32_t pix_clk_100hz; 1306 uint16_t vblank_start; 1307 uint16_t vblank_end; 1308 uint16_t vstartup_start; 1309 uint16_t vtotal; 1310 uint16_t htotal; 1311 uint8_t vblank_pipe_index; 1312 uint8_t padding[1]; 1313 struct { 1314 uint8_t drr_in_use; 1315 uint8_t drr_window_size_ms; // Indicates largest VMIN/VMAX adjustment per frame 1316 uint16_t min_vtotal_supported; // Min VTOTAL that supports switching in VBLANK 1317 uint16_t max_vtotal_supported; // Max VTOTAL that can support SubVP static scheduling 1318 uint8_t use_ramping; // Use ramping or not 1319 uint8_t drr_vblank_start_margin; 1320 } drr_info; // DRR considered as part of SubVP + VBLANK case 1321 } vblank_data; 1322 } pipe_config; 1323 1324 /* - subvp_data in the union (pipe_config) takes up 27 bytes. 1325 * - Make the "mode" field a uint8_t instead of enum so we only use 1 byte (only 1326 * for the DMCUB command, cast to enum once we populate the DMCUB subvp state). 1327 */ 1328 uint8_t mode; // enum mclk_switch_mode 1329 }; 1330 1331 /** 1332 * Config data for Sub-VP and FPO 1333 * Named "v2" for now -- once FPO and SUBVP are fully merged 1334 * the type name can be updated 1335 */ 1336 struct dmub_cmd_fw_assisted_mclk_switch_config_v2 { 1337 uint16_t watermark_a_cache; 1338 uint8_t vertical_int_margin_us; 1339 uint8_t pstate_allow_width_us; 1340 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 pipe_data[DMUB_MAX_SUBVP_STREAMS]; 1341 }; 1342 1343 /** 1344 * DMUB rb command definition for Sub-VP and FPO 1345 * Named "v2" for now -- once FPO and SUBVP are fully merged 1346 * the type name can be updated 1347 */ 1348 struct dmub_rb_cmd_fw_assisted_mclk_switch_v2 { 1349 struct dmub_cmd_header header; 1350 struct dmub_cmd_fw_assisted_mclk_switch_config_v2 config_data; 1351 }; 1352 1353 /** 1354 * enum dmub_cmd_idle_opt_type - Idle optimization command type. 1355 */ 1356 enum dmub_cmd_idle_opt_type { 1357 /** 1358 * DCN hardware restore. 1359 */ 1360 DMUB_CMD__IDLE_OPT_DCN_RESTORE = 0, 1361 1362 /** 1363 * DCN hardware save. 1364 */ 1365 DMUB_CMD__IDLE_OPT_DCN_SAVE_INIT = 1, 1366 1367 /** 1368 * DCN hardware notify idle. 1369 */ 1370 DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE = 2 1371 }; 1372 1373 /** 1374 * struct dmub_rb_cmd_idle_opt_dcn_restore - DCN restore command data. 1375 */ 1376 struct dmub_rb_cmd_idle_opt_dcn_restore { 1377 struct dmub_cmd_header header; /**< header */ 1378 }; 1379 1380 /** 1381 * struct dmub_dcn_notify_idle_cntl_data - Data passed to FW in a DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command. 1382 */ 1383 struct dmub_dcn_notify_idle_cntl_data { 1384 uint8_t driver_idle; 1385 uint8_t pad[1]; 1386 }; 1387 1388 /** 1389 * struct dmub_rb_cmd_idle_opt_dcn_notify_idle - Data passed to FW in a DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command. 1390 */ 1391 struct dmub_rb_cmd_idle_opt_dcn_notify_idle { 1392 struct dmub_cmd_header header; /**< header */ 1393 struct dmub_dcn_notify_idle_cntl_data cntl_data; 1394 }; 1395 1396 /** 1397 * struct dmub_clocks - Clock update notification. 1398 */ 1399 struct dmub_clocks { 1400 uint32_t dispclk_khz; /**< dispclk kHz */ 1401 uint32_t dppclk_khz; /**< dppclk kHz */ 1402 uint32_t dcfclk_khz; /**< dcfclk kHz */ 1403 uint32_t dcfclk_deep_sleep_khz; /**< dcfclk deep sleep kHz */ 1404 }; 1405 1406 /** 1407 * enum dmub_cmd_clk_mgr_type - Clock manager commands. 1408 */ 1409 enum dmub_cmd_clk_mgr_type { 1410 /** 1411 * Notify DMCUB of clock update. 1412 */ 1413 DMUB_CMD__CLK_MGR_NOTIFY_CLOCKS = 0, 1414 }; 1415 1416 /** 1417 * struct dmub_rb_cmd_clk_mgr_notify_clocks - Clock update notification. 1418 */ 1419 struct dmub_rb_cmd_clk_mgr_notify_clocks { 1420 struct dmub_cmd_header header; /**< header */ 1421 struct dmub_clocks clocks; /**< clock data */ 1422 }; 1423 1424 /** 1425 * struct dmub_cmd_digx_encoder_control_data - Encoder control data. 1426 */ 1427 struct dmub_cmd_digx_encoder_control_data { 1428 union dig_encoder_control_parameters_v1_5 dig; /**< payload */ 1429 }; 1430 1431 /** 1432 * struct dmub_rb_cmd_digx_encoder_control - Encoder control command. 1433 */ 1434 struct dmub_rb_cmd_digx_encoder_control { 1435 struct dmub_cmd_header header; /**< header */ 1436 struct dmub_cmd_digx_encoder_control_data encoder_control; /**< payload */ 1437 }; 1438 1439 /** 1440 * struct dmub_cmd_set_pixel_clock_data - Set pixel clock data. 1441 */ 1442 struct dmub_cmd_set_pixel_clock_data { 1443 struct set_pixel_clock_parameter_v1_7 clk; /**< payload */ 1444 }; 1445 1446 /** 1447 * struct dmub_cmd_set_pixel_clock_data - Set pixel clock command. 1448 */ 1449 struct dmub_rb_cmd_set_pixel_clock { 1450 struct dmub_cmd_header header; /**< header */ 1451 struct dmub_cmd_set_pixel_clock_data pixel_clock; /**< payload */ 1452 }; 1453 1454 /** 1455 * struct dmub_cmd_enable_disp_power_gating_data - Display power gating. 1456 */ 1457 struct dmub_cmd_enable_disp_power_gating_data { 1458 struct enable_disp_power_gating_parameters_v2_1 pwr; /**< payload */ 1459 }; 1460 1461 /** 1462 * struct dmub_rb_cmd_enable_disp_power_gating - Display power command. 1463 */ 1464 struct dmub_rb_cmd_enable_disp_power_gating { 1465 struct dmub_cmd_header header; /**< header */ 1466 struct dmub_cmd_enable_disp_power_gating_data power_gating; /**< payload */ 1467 }; 1468 1469 /** 1470 * struct dmub_dig_transmitter_control_data_v1_7 - Transmitter control. 1471 */ 1472 struct dmub_dig_transmitter_control_data_v1_7 { 1473 uint8_t phyid; /**< 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4=UNIPHYE, 5=UNIPHYF */ 1474 uint8_t action; /**< Defined as ATOM_TRANSMITER_ACTION_xxx */ 1475 union { 1476 uint8_t digmode; /**< enum atom_encode_mode_def */ 1477 uint8_t dplaneset; /**< DP voltage swing and pre-emphasis value, "DP_LANE_SET__xDB_y_zV" */ 1478 } mode_laneset; 1479 uint8_t lanenum; /**< Number of lanes */ 1480 union { 1481 uint32_t symclk_10khz; /**< Symbol Clock in 10Khz */ 1482 } symclk_units; 1483 uint8_t hpdsel; /**< =1: HPD1, =2: HPD2, ..., =6: HPD6, =0: HPD is not assigned */ 1484 uint8_t digfe_sel; /**< DIG front-end selection, bit0 means DIG0 FE is enabled */ 1485 uint8_t connobj_id; /**< Connector Object Id defined in ObjectId.h */ 1486 uint8_t HPO_instance; /**< HPO instance (0: inst0, 1: inst1) */ 1487 uint8_t reserved1; /**< For future use */ 1488 uint8_t reserved2[3]; /**< For future use */ 1489 uint32_t reserved3[11]; /**< For future use */ 1490 }; 1491 1492 /** 1493 * union dmub_cmd_dig1_transmitter_control_data - Transmitter control data. 1494 */ 1495 union dmub_cmd_dig1_transmitter_control_data { 1496 struct dig_transmitter_control_parameters_v1_6 dig; /**< payload */ 1497 struct dmub_dig_transmitter_control_data_v1_7 dig_v1_7; /**< payload 1.7 */ 1498 }; 1499 1500 /** 1501 * struct dmub_rb_cmd_dig1_transmitter_control - Transmitter control command. 1502 */ 1503 struct dmub_rb_cmd_dig1_transmitter_control { 1504 struct dmub_cmd_header header; /**< header */ 1505 union dmub_cmd_dig1_transmitter_control_data transmitter_control; /**< payload */ 1506 }; 1507 1508 /** 1509 * struct dmub_rb_cmd_domain_control_data - Data for DOMAIN power control 1510 */ 1511 struct dmub_rb_cmd_domain_control_data { 1512 uint8_t inst : 6; /**< DOMAIN instance to control */ 1513 uint8_t power_gate : 1; /**< 1=power gate, 0=power up */ 1514 uint8_t reserved[3]; /**< Reserved for future use */ 1515 }; 1516 1517 /** 1518 * struct dmub_rb_cmd_domain_control - Controls DOMAIN power gating 1519 */ 1520 struct dmub_rb_cmd_domain_control { 1521 struct dmub_cmd_header header; /**< header */ 1522 struct dmub_rb_cmd_domain_control_data data; /**< payload */ 1523 }; 1524 1525 /** 1526 * DPIA tunnel command parameters. 1527 */ 1528 struct dmub_cmd_dig_dpia_control_data { 1529 uint8_t enc_id; /** 0 = ENGINE_ID_DIGA, ... */ 1530 uint8_t action; /** ATOM_TRANSMITER_ACTION_DISABLE/ENABLE/SETUP_VSEMPH */ 1531 union { 1532 uint8_t digmode; /** enum atom_encode_mode_def */ 1533 uint8_t dplaneset; /** DP voltage swing and pre-emphasis value */ 1534 } mode_laneset; 1535 uint8_t lanenum; /** Lane number 1, 2, 4, 8 */ 1536 uint32_t symclk_10khz; /** Symbol Clock in 10Khz */ 1537 uint8_t hpdsel; /** =0: HPD is not assigned */ 1538 uint8_t digfe_sel; /** DIG stream( front-end ) selection, bit0 - DIG0 FE */ 1539 uint8_t dpia_id; /** Index of DPIA */ 1540 uint8_t fec_rdy : 1; 1541 uint8_t reserved : 7; 1542 uint32_t reserved1; 1543 }; 1544 1545 /** 1546 * DMUB command for DPIA tunnel control. 1547 */ 1548 struct dmub_rb_cmd_dig1_dpia_control { 1549 struct dmub_cmd_header header; 1550 struct dmub_cmd_dig_dpia_control_data dpia_control; 1551 }; 1552 1553 /** 1554 * SET_CONFIG Command Payload 1555 */ 1556 struct set_config_cmd_payload { 1557 uint8_t msg_type; /* set config message type */ 1558 uint8_t msg_data; /* set config message data */ 1559 }; 1560 1561 /** 1562 * Data passed from driver to FW in a DMUB_CMD__DPIA_SET_CONFIG_ACCESS command. 1563 */ 1564 struct dmub_cmd_set_config_control_data { 1565 struct set_config_cmd_payload cmd_pkt; 1566 uint8_t instance; /* DPIA instance */ 1567 uint8_t immed_status; /* Immediate status returned in case of error */ 1568 }; 1569 1570 /** 1571 * DMUB command structure for SET_CONFIG command. 1572 */ 1573 struct dmub_rb_cmd_set_config_access { 1574 struct dmub_cmd_header header; /* header */ 1575 struct dmub_cmd_set_config_control_data set_config_control; /* set config data */ 1576 }; 1577 1578 /** 1579 * Data passed from driver to FW in a DMUB_CMD__DPIA_MST_ALLOC_SLOTS command. 1580 */ 1581 struct dmub_cmd_mst_alloc_slots_control_data { 1582 uint8_t mst_alloc_slots; /* mst slots to be allotted */ 1583 uint8_t instance; /* DPIA instance */ 1584 uint8_t immed_status; /* Immediate status returned as there is no outbox msg posted */ 1585 uint8_t mst_slots_in_use; /* returns slots in use for error cases */ 1586 }; 1587 1588 /** 1589 * DMUB command structure for SET_ command. 1590 */ 1591 struct dmub_rb_cmd_set_mst_alloc_slots { 1592 struct dmub_cmd_header header; /* header */ 1593 struct dmub_cmd_mst_alloc_slots_control_data mst_slots_control; /* mst slots control */ 1594 }; 1595 1596 /** 1597 * DMUB command structure for DPIA HPD int enable control. 1598 */ 1599 struct dmub_rb_cmd_dpia_hpd_int_enable { 1600 struct dmub_cmd_header header; /* header */ 1601 uint32_t enable; /* dpia hpd interrupt enable */ 1602 }; 1603 1604 /** 1605 * struct dmub_rb_cmd_dpphy_init - DPPHY init. 1606 */ 1607 struct dmub_rb_cmd_dpphy_init { 1608 struct dmub_cmd_header header; /**< header */ 1609 uint8_t reserved[60]; /**< reserved bits */ 1610 }; 1611 1612 /** 1613 * enum dp_aux_request_action - DP AUX request command listing. 1614 * 1615 * 4 AUX request command bits are shifted to high nibble. 1616 */ 1617 enum dp_aux_request_action { 1618 /** I2C-over-AUX write request */ 1619 DP_AUX_REQ_ACTION_I2C_WRITE = 0x00, 1620 /** I2C-over-AUX read request */ 1621 DP_AUX_REQ_ACTION_I2C_READ = 0x10, 1622 /** I2C-over-AUX write status request */ 1623 DP_AUX_REQ_ACTION_I2C_STATUS_REQ = 0x20, 1624 /** I2C-over-AUX write request with MOT=1 */ 1625 DP_AUX_REQ_ACTION_I2C_WRITE_MOT = 0x40, 1626 /** I2C-over-AUX read request with MOT=1 */ 1627 DP_AUX_REQ_ACTION_I2C_READ_MOT = 0x50, 1628 /** I2C-over-AUX write status request with MOT=1 */ 1629 DP_AUX_REQ_ACTION_I2C_STATUS_REQ_MOT = 0x60, 1630 /** Native AUX write request */ 1631 DP_AUX_REQ_ACTION_DPCD_WRITE = 0x80, 1632 /** Native AUX read request */ 1633 DP_AUX_REQ_ACTION_DPCD_READ = 0x90 1634 }; 1635 1636 /** 1637 * enum aux_return_code_type - DP AUX process return code listing. 1638 */ 1639 enum aux_return_code_type { 1640 /** AUX process succeeded */ 1641 AUX_RET_SUCCESS = 0, 1642 /** AUX process failed with unknown reason */ 1643 AUX_RET_ERROR_UNKNOWN, 1644 /** AUX process completed with invalid reply */ 1645 AUX_RET_ERROR_INVALID_REPLY, 1646 /** AUX process timed out */ 1647 AUX_RET_ERROR_TIMEOUT, 1648 /** HPD was low during AUX process */ 1649 AUX_RET_ERROR_HPD_DISCON, 1650 /** Failed to acquire AUX engine */ 1651 AUX_RET_ERROR_ENGINE_ACQUIRE, 1652 /** AUX request not supported */ 1653 AUX_RET_ERROR_INVALID_OPERATION, 1654 /** AUX process not available */ 1655 AUX_RET_ERROR_PROTOCOL_ERROR, 1656 }; 1657 1658 /** 1659 * enum aux_channel_type - DP AUX channel type listing. 1660 */ 1661 enum aux_channel_type { 1662 /** AUX thru Legacy DP AUX */ 1663 AUX_CHANNEL_LEGACY_DDC, 1664 /** AUX thru DPIA DP tunneling */ 1665 AUX_CHANNEL_DPIA 1666 }; 1667 1668 /** 1669 * struct aux_transaction_parameters - DP AUX request transaction data 1670 */ 1671 struct aux_transaction_parameters { 1672 uint8_t is_i2c_over_aux; /**< 0=native AUX, 1=I2C-over-AUX */ 1673 uint8_t action; /**< enum dp_aux_request_action */ 1674 uint8_t length; /**< DP AUX request data length */ 1675 uint8_t reserved; /**< For future use */ 1676 uint32_t address; /**< DP AUX address */ 1677 uint8_t data[16]; /**< DP AUX write data */ 1678 }; 1679 1680 /** 1681 * Data passed from driver to FW in a DMUB_CMD__DP_AUX_ACCESS command. 1682 */ 1683 struct dmub_cmd_dp_aux_control_data { 1684 uint8_t instance; /**< AUX instance or DPIA instance */ 1685 uint8_t manual_acq_rel_enable; /**< manual control for acquiring or releasing AUX channel */ 1686 uint8_t sw_crc_enabled; /**< Use software CRC for tunneling packet instead of hardware CRC */ 1687 uint8_t reserved0; /**< For future use */ 1688 uint16_t timeout; /**< timeout time in us */ 1689 uint16_t reserved1; /**< For future use */ 1690 enum aux_channel_type type; /**< enum aux_channel_type */ 1691 struct aux_transaction_parameters dpaux; /**< struct aux_transaction_parameters */ 1692 }; 1693 1694 /** 1695 * Definition of a DMUB_CMD__DP_AUX_ACCESS command. 1696 */ 1697 struct dmub_rb_cmd_dp_aux_access { 1698 /** 1699 * Command header. 1700 */ 1701 struct dmub_cmd_header header; 1702 /** 1703 * Data passed from driver to FW in a DMUB_CMD__DP_AUX_ACCESS command. 1704 */ 1705 struct dmub_cmd_dp_aux_control_data aux_control; 1706 }; 1707 1708 /** 1709 * Definition of a DMUB_CMD__OUTBOX1_ENABLE command. 1710 */ 1711 struct dmub_rb_cmd_outbox1_enable { 1712 /** 1713 * Command header. 1714 */ 1715 struct dmub_cmd_header header; 1716 /** 1717 * enable: 0x0 -> disable outbox1 notification (default value) 1718 * 0x1 -> enable outbox1 notification 1719 */ 1720 uint32_t enable; 1721 }; 1722 1723 /* DP AUX Reply command - OutBox Cmd */ 1724 /** 1725 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 1726 */ 1727 struct aux_reply_data { 1728 /** 1729 * Aux cmd 1730 */ 1731 uint8_t command; 1732 /** 1733 * Aux reply data length (max: 16 bytes) 1734 */ 1735 uint8_t length; 1736 /** 1737 * Alignment only 1738 */ 1739 uint8_t pad[2]; 1740 /** 1741 * Aux reply data 1742 */ 1743 uint8_t data[16]; 1744 }; 1745 1746 /** 1747 * Control Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 1748 */ 1749 struct aux_reply_control_data { 1750 /** 1751 * Reserved for future use 1752 */ 1753 uint32_t handle; 1754 /** 1755 * Aux Instance 1756 */ 1757 uint8_t instance; 1758 /** 1759 * Aux transaction result: definition in enum aux_return_code_type 1760 */ 1761 uint8_t result; 1762 /** 1763 * Alignment only 1764 */ 1765 uint16_t pad; 1766 }; 1767 1768 /** 1769 * Definition of a DMUB_OUT_CMD__DP_AUX_REPLY command. 1770 */ 1771 struct dmub_rb_cmd_dp_aux_reply { 1772 /** 1773 * Command header. 1774 */ 1775 struct dmub_cmd_header header; 1776 /** 1777 * Control Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 1778 */ 1779 struct aux_reply_control_data control; 1780 /** 1781 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_AUX_REPLY command. 1782 */ 1783 struct aux_reply_data reply_data; 1784 }; 1785 1786 /* DP HPD Notify command - OutBox Cmd */ 1787 /** 1788 * DP HPD Type 1789 */ 1790 enum dp_hpd_type { 1791 /** 1792 * Normal DP HPD 1793 */ 1794 DP_HPD = 0, 1795 /** 1796 * DP HPD short pulse 1797 */ 1798 DP_IRQ 1799 }; 1800 1801 /** 1802 * DP HPD Status 1803 */ 1804 enum dp_hpd_status { 1805 /** 1806 * DP_HPD status low 1807 */ 1808 DP_HPD_UNPLUG = 0, 1809 /** 1810 * DP_HPD status high 1811 */ 1812 DP_HPD_PLUG 1813 }; 1814 1815 /** 1816 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_HPD_NOTIFY command. 1817 */ 1818 struct dp_hpd_data { 1819 /** 1820 * DP HPD instance 1821 */ 1822 uint8_t instance; 1823 /** 1824 * HPD type 1825 */ 1826 uint8_t hpd_type; 1827 /** 1828 * HPD status: only for type: DP_HPD to indicate status 1829 */ 1830 uint8_t hpd_status; 1831 /** 1832 * Alignment only 1833 */ 1834 uint8_t pad; 1835 }; 1836 1837 /** 1838 * Definition of a DMUB_OUT_CMD__DP_HPD_NOTIFY command. 1839 */ 1840 struct dmub_rb_cmd_dp_hpd_notify { 1841 /** 1842 * Command header. 1843 */ 1844 struct dmub_cmd_header header; 1845 /** 1846 * Data passed to driver from FW in a DMUB_OUT_CMD__DP_HPD_NOTIFY command. 1847 */ 1848 struct dp_hpd_data hpd_data; 1849 }; 1850 1851 /** 1852 * Definition of a SET_CONFIG reply from DPOA. 1853 */ 1854 enum set_config_status { 1855 SET_CONFIG_PENDING = 0, 1856 SET_CONFIG_ACK_RECEIVED, 1857 SET_CONFIG_RX_TIMEOUT, 1858 SET_CONFIG_UNKNOWN_ERROR, 1859 }; 1860 1861 /** 1862 * Definition of a set_config reply 1863 */ 1864 struct set_config_reply_control_data { 1865 uint8_t instance; /* DPIA Instance */ 1866 uint8_t status; /* Set Config reply */ 1867 uint16_t pad; /* Alignment */ 1868 }; 1869 1870 /** 1871 * Definition of a DMUB_OUT_CMD__SET_CONFIG_REPLY command. 1872 */ 1873 struct dmub_rb_cmd_dp_set_config_reply { 1874 struct dmub_cmd_header header; 1875 struct set_config_reply_control_data set_config_reply_control; 1876 }; 1877 1878 /** 1879 * Definition of a DPIA notification header 1880 */ 1881 struct dpia_notification_header { 1882 uint8_t instance; /**< DPIA Instance */ 1883 uint8_t reserved[3]; 1884 enum dmub_cmd_dpia_notification_type type; /**< DPIA notification type */ 1885 }; 1886 1887 /** 1888 * Definition of the common data struct of DPIA notification 1889 */ 1890 struct dpia_notification_common { 1891 uint8_t cmd_buffer[DMUB_RB_CMD_SIZE - sizeof(struct dmub_cmd_header) 1892 - sizeof(struct dpia_notification_header)]; 1893 }; 1894 1895 /** 1896 * Definition of a DPIA notification data 1897 */ 1898 struct dpia_bw_allocation_notify_data { 1899 union { 1900 struct { 1901 uint16_t cm_bw_alloc_support: 1; /**< USB4 CM BW Allocation mode support */ 1902 uint16_t bw_request_failed: 1; /**< BW_Request_Failed */ 1903 uint16_t bw_request_succeeded: 1; /**< BW_Request_Succeeded */ 1904 uint16_t est_bw_changed: 1; /**< Estimated_BW changed */ 1905 uint16_t bw_alloc_cap_changed: 1; /**< BW_Allocation_Capabiity_Changed */ 1906 uint16_t reserved: 11; /**< Reserved */ 1907 } bits; 1908 1909 uint16_t flags; 1910 }; 1911 1912 uint8_t cm_id; /**< CM ID */ 1913 uint8_t group_id; /**< Group ID */ 1914 uint8_t granularity; /**< BW Allocation Granularity */ 1915 uint8_t estimated_bw; /**< Estimated_BW */ 1916 uint8_t allocated_bw; /**< Allocated_BW */ 1917 uint8_t reserved; 1918 }; 1919 1920 /** 1921 * union dpia_notify_data_type - DPIA Notification in Outbox command 1922 */ 1923 union dpia_notification_data { 1924 /** 1925 * DPIA Notification for common data struct 1926 */ 1927 struct dpia_notification_common common_data; 1928 1929 /** 1930 * DPIA Notification for DP BW Allocation support 1931 */ 1932 struct dpia_bw_allocation_notify_data dpia_bw_alloc; 1933 }; 1934 1935 /** 1936 * Definition of a DPIA notification payload 1937 */ 1938 struct dpia_notification_payload { 1939 struct dpia_notification_header header; 1940 union dpia_notification_data data; /**< DPIA notification payload data */ 1941 }; 1942 1943 /** 1944 * Definition of a DMUB_OUT_CMD__DPIA_NOTIFICATION command. 1945 */ 1946 struct dmub_rb_cmd_dpia_notification { 1947 struct dmub_cmd_header header; /**< DPIA notification header */ 1948 struct dpia_notification_payload payload; /**< DPIA notification payload */ 1949 }; 1950 1951 /** 1952 * Data passed from driver to FW in a DMUB_CMD__QUERY_HPD_STATE command. 1953 */ 1954 struct dmub_cmd_hpd_state_query_data { 1955 uint8_t instance; /**< HPD instance or DPIA instance */ 1956 uint8_t result; /**< For returning HPD state */ 1957 uint16_t pad; /** < Alignment */ 1958 enum aux_channel_type ch_type; /**< enum aux_channel_type */ 1959 enum aux_return_code_type status; /**< for returning the status of command */ 1960 }; 1961 1962 /** 1963 * Definition of a DMUB_CMD__QUERY_HPD_STATE command. 1964 */ 1965 struct dmub_rb_cmd_query_hpd_state { 1966 /** 1967 * Command header. 1968 */ 1969 struct dmub_cmd_header header; 1970 /** 1971 * Data passed from driver to FW in a DMUB_CMD__QUERY_HPD_STATE command. 1972 */ 1973 struct dmub_cmd_hpd_state_query_data data; 1974 }; 1975 1976 /* 1977 * Command IDs should be treated as stable ABI. 1978 * Do not reuse or modify IDs. 1979 */ 1980 1981 /** 1982 * PSR command sub-types. 1983 */ 1984 enum dmub_cmd_psr_type { 1985 /** 1986 * Set PSR version support. 1987 */ 1988 DMUB_CMD__PSR_SET_VERSION = 0, 1989 /** 1990 * Copy driver-calculated parameters to PSR state. 1991 */ 1992 DMUB_CMD__PSR_COPY_SETTINGS = 1, 1993 /** 1994 * Enable PSR. 1995 */ 1996 DMUB_CMD__PSR_ENABLE = 2, 1997 1998 /** 1999 * Disable PSR. 2000 */ 2001 DMUB_CMD__PSR_DISABLE = 3, 2002 2003 /** 2004 * Set PSR level. 2005 * PSR level is a 16-bit value dicated by driver that 2006 * will enable/disable different functionality. 2007 */ 2008 DMUB_CMD__PSR_SET_LEVEL = 4, 2009 2010 /** 2011 * Forces PSR enabled until an explicit PSR disable call. 2012 */ 2013 DMUB_CMD__PSR_FORCE_STATIC = 5, 2014 /** 2015 * Set vtotal in psr active for FreeSync PSR. 2016 */ 2017 DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE = 6, 2018 /** 2019 * Set PSR power option 2020 */ 2021 DMUB_CMD__SET_PSR_POWER_OPT = 7, 2022 }; 2023 2024 enum dmub_cmd_fams_type { 2025 DMUB_CMD__FAMS_SETUP_FW_CTRL = 0, 2026 DMUB_CMD__FAMS_DRR_UPDATE = 1, 2027 DMUB_CMD__HANDLE_SUBVP_CMD = 2, // specifically for SubVP cmd 2028 /** 2029 * For SubVP set manual trigger in FW because it 2030 * triggers DRR_UPDATE_PENDING which SubVP relies 2031 * on (for any SubVP cases that use a DRR display) 2032 */ 2033 DMUB_CMD__FAMS_SET_MANUAL_TRIGGER = 3, 2034 }; 2035 2036 /** 2037 * PSR versions. 2038 */ 2039 enum psr_version { 2040 /** 2041 * PSR version 1. 2042 */ 2043 PSR_VERSION_1 = 0, 2044 /** 2045 * Freesync PSR SU. 2046 */ 2047 PSR_VERSION_SU_1 = 1, 2048 /** 2049 * PSR not supported. 2050 */ 2051 PSR_VERSION_UNSUPPORTED = 0xFFFFFFFF, 2052 }; 2053 2054 /** 2055 * enum dmub_cmd_mall_type - MALL commands 2056 */ 2057 enum dmub_cmd_mall_type { 2058 /** 2059 * Allows display refresh from MALL. 2060 */ 2061 DMUB_CMD__MALL_ACTION_ALLOW = 0, 2062 /** 2063 * Disallows display refresh from MALL. 2064 */ 2065 DMUB_CMD__MALL_ACTION_DISALLOW = 1, 2066 /** 2067 * Cursor copy for MALL. 2068 */ 2069 DMUB_CMD__MALL_ACTION_COPY_CURSOR = 2, 2070 /** 2071 * Controls DF requests. 2072 */ 2073 DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3, 2074 }; 2075 2076 /** 2077 * PHY Link rate for DP. 2078 */ 2079 enum phy_link_rate { 2080 /** 2081 * not supported. 2082 */ 2083 PHY_RATE_UNKNOWN = 0, 2084 /** 2085 * Rate_1 (RBR) - 1.62 Gbps/Lane 2086 */ 2087 PHY_RATE_162 = 1, 2088 /** 2089 * Rate_2 - 2.16 Gbps/Lane 2090 */ 2091 PHY_RATE_216 = 2, 2092 /** 2093 * Rate_3 - 2.43 Gbps/Lane 2094 */ 2095 PHY_RATE_243 = 3, 2096 /** 2097 * Rate_4 (HBR) - 2.70 Gbps/Lane 2098 */ 2099 PHY_RATE_270 = 4, 2100 /** 2101 * Rate_5 (RBR2)- 3.24 Gbps/Lane 2102 */ 2103 PHY_RATE_324 = 5, 2104 /** 2105 * Rate_6 - 4.32 Gbps/Lane 2106 */ 2107 PHY_RATE_432 = 6, 2108 /** 2109 * Rate_7 (HBR2)- 5.40 Gbps/Lane 2110 */ 2111 PHY_RATE_540 = 7, 2112 /** 2113 * Rate_8 (HBR3)- 8.10 Gbps/Lane 2114 */ 2115 PHY_RATE_810 = 8, 2116 /** 2117 * UHBR10 - 10.0 Gbps/Lane 2118 */ 2119 PHY_RATE_1000 = 9, 2120 /** 2121 * UHBR13.5 - 13.5 Gbps/Lane 2122 */ 2123 PHY_RATE_1350 = 10, 2124 /** 2125 * UHBR10 - 20.0 Gbps/Lane 2126 */ 2127 PHY_RATE_2000 = 11, 2128 }; 2129 2130 /** 2131 * enum dmub_phy_fsm_state - PHY FSM states. 2132 * PHY FSM state to transit to during PSR enable/disable. 2133 */ 2134 enum dmub_phy_fsm_state { 2135 DMUB_PHY_FSM_POWER_UP_DEFAULT = 0, 2136 DMUB_PHY_FSM_RESET, 2137 DMUB_PHY_FSM_RESET_RELEASED, 2138 DMUB_PHY_FSM_SRAM_LOAD_DONE, 2139 DMUB_PHY_FSM_INITIALIZED, 2140 DMUB_PHY_FSM_CALIBRATED, 2141 DMUB_PHY_FSM_CALIBRATED_LP, 2142 DMUB_PHY_FSM_CALIBRATED_PG, 2143 DMUB_PHY_FSM_POWER_DOWN, 2144 DMUB_PHY_FSM_PLL_EN, 2145 DMUB_PHY_FSM_TX_EN, 2146 DMUB_PHY_FSM_FAST_LP, 2147 DMUB_PHY_FSM_P2_PLL_OFF_CPM, 2148 DMUB_PHY_FSM_P2_PLL_OFF_PG, 2149 DMUB_PHY_FSM_P2_PLL_OFF, 2150 DMUB_PHY_FSM_P2_PLL_ON, 2151 }; 2152 2153 /** 2154 * Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command. 2155 */ 2156 struct dmub_cmd_psr_copy_settings_data { 2157 /** 2158 * Flags that can be set by driver to change some PSR behaviour. 2159 */ 2160 union dmub_psr_debug_flags debug; 2161 /** 2162 * 16-bit value dicated by driver that will enable/disable different functionality. 2163 */ 2164 uint16_t psr_level; 2165 /** 2166 * DPP HW instance. 2167 */ 2168 uint8_t dpp_inst; 2169 /** 2170 * MPCC HW instance. 2171 * Not used in dmub fw, 2172 * dmub fw will get active opp by reading odm registers. 2173 */ 2174 uint8_t mpcc_inst; 2175 /** 2176 * OPP HW instance. 2177 * Not used in dmub fw, 2178 * dmub fw will get active opp by reading odm registers. 2179 */ 2180 uint8_t opp_inst; 2181 /** 2182 * OTG HW instance. 2183 */ 2184 uint8_t otg_inst; 2185 /** 2186 * DIG FE HW instance. 2187 */ 2188 uint8_t digfe_inst; 2189 /** 2190 * DIG BE HW instance. 2191 */ 2192 uint8_t digbe_inst; 2193 /** 2194 * DP PHY HW instance. 2195 */ 2196 uint8_t dpphy_inst; 2197 /** 2198 * AUX HW instance. 2199 */ 2200 uint8_t aux_inst; 2201 /** 2202 * Determines if SMU optimzations are enabled/disabled. 2203 */ 2204 uint8_t smu_optimizations_en; 2205 /** 2206 * Unused. 2207 * TODO: Remove. 2208 */ 2209 uint8_t frame_delay; 2210 /** 2211 * If RFB setup time is greater than the total VBLANK time, 2212 * it is not possible for the sink to capture the video frame 2213 * in the same frame the SDP is sent. In this case, 2214 * the frame capture indication bit should be set and an extra 2215 * static frame should be transmitted to the sink. 2216 */ 2217 uint8_t frame_cap_ind; 2218 /** 2219 * Granularity of Y offset supported by sink. 2220 */ 2221 uint8_t su_y_granularity; 2222 /** 2223 * Indicates whether sink should start capturing 2224 * immediately following active scan line, 2225 * or starting with the 2nd active scan line. 2226 */ 2227 uint8_t line_capture_indication; 2228 /** 2229 * Multi-display optimizations are implemented on certain ASICs. 2230 */ 2231 uint8_t multi_disp_optimizations_en; 2232 /** 2233 * The last possible line SDP may be transmitted without violating 2234 * the RFB setup time or entering the active video frame. 2235 */ 2236 uint16_t init_sdp_deadline; 2237 /** 2238 * @ rate_control_caps : Indicate FreeSync PSR Sink Capabilities 2239 */ 2240 uint8_t rate_control_caps ; 2241 /* 2242 * Force PSRSU always doing full frame update 2243 */ 2244 uint8_t force_ffu_mode; 2245 /** 2246 * Length of each horizontal line in us. 2247 */ 2248 uint32_t line_time_in_us; 2249 /** 2250 * FEC enable status in driver 2251 */ 2252 uint8_t fec_enable_status; 2253 /** 2254 * FEC re-enable delay when PSR exit. 2255 * unit is 100us, range form 0~255(0xFF). 2256 */ 2257 uint8_t fec_enable_delay_in100us; 2258 /** 2259 * PSR control version. 2260 */ 2261 uint8_t cmd_version; 2262 /** 2263 * Panel Instance. 2264 * Panel instance to identify which psr_state to use 2265 * Currently the support is only for 0 or 1 2266 */ 2267 uint8_t panel_inst; 2268 /* 2269 * DSC enable status in driver 2270 */ 2271 uint8_t dsc_enable_status; 2272 /* 2273 * Use FSM state for PSR power up/down 2274 */ 2275 uint8_t use_phy_fsm; 2276 /** 2277 * frame delay for frame re-lock 2278 */ 2279 uint8_t relock_delay_frame_cnt; 2280 /** 2281 * Explicit padding to 2 byte boundary. 2282 */ 2283 uint8_t pad3; 2284 /** 2285 * DSC Slice height. 2286 */ 2287 uint16_t dsc_slice_height; 2288 /** 2289 * Explicit padding to 4 byte boundary. 2290 */ 2291 uint16_t pad; 2292 }; 2293 2294 /** 2295 * Definition of a DMUB_CMD__PSR_COPY_SETTINGS command. 2296 */ 2297 struct dmub_rb_cmd_psr_copy_settings { 2298 /** 2299 * Command header. 2300 */ 2301 struct dmub_cmd_header header; 2302 /** 2303 * Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command. 2304 */ 2305 struct dmub_cmd_psr_copy_settings_data psr_copy_settings_data; 2306 }; 2307 2308 /** 2309 * Data passed from driver to FW in a DMUB_CMD__PSR_SET_LEVEL command. 2310 */ 2311 struct dmub_cmd_psr_set_level_data { 2312 /** 2313 * 16-bit value dicated by driver that will enable/disable different functionality. 2314 */ 2315 uint16_t psr_level; 2316 /** 2317 * PSR control version. 2318 */ 2319 uint8_t cmd_version; 2320 /** 2321 * Panel Instance. 2322 * Panel instance to identify which psr_state to use 2323 * Currently the support is only for 0 or 1 2324 */ 2325 uint8_t panel_inst; 2326 }; 2327 2328 /** 2329 * Definition of a DMUB_CMD__PSR_SET_LEVEL command. 2330 */ 2331 struct dmub_rb_cmd_psr_set_level { 2332 /** 2333 * Command header. 2334 */ 2335 struct dmub_cmd_header header; 2336 /** 2337 * Definition of a DMUB_CMD__PSR_SET_LEVEL command. 2338 */ 2339 struct dmub_cmd_psr_set_level_data psr_set_level_data; 2340 }; 2341 2342 struct dmub_rb_cmd_psr_enable_data { 2343 /** 2344 * PSR control version. 2345 */ 2346 uint8_t cmd_version; 2347 /** 2348 * Panel Instance. 2349 * Panel instance to identify which psr_state to use 2350 * Currently the support is only for 0 or 1 2351 */ 2352 uint8_t panel_inst; 2353 /** 2354 * Phy state to enter. 2355 * Values to use are defined in dmub_phy_fsm_state 2356 */ 2357 uint8_t phy_fsm_state; 2358 /** 2359 * Phy rate for DP - RBR/HBR/HBR2/HBR3. 2360 * Set this using enum phy_link_rate. 2361 * This does not support HDMI/DP2 for now. 2362 */ 2363 uint8_t phy_rate; 2364 }; 2365 2366 /** 2367 * Definition of a DMUB_CMD__PSR_ENABLE command. 2368 * PSR enable/disable is controlled using the sub_type. 2369 */ 2370 struct dmub_rb_cmd_psr_enable { 2371 /** 2372 * Command header. 2373 */ 2374 struct dmub_cmd_header header; 2375 2376 struct dmub_rb_cmd_psr_enable_data data; 2377 }; 2378 2379 /** 2380 * Data passed from driver to FW in a DMUB_CMD__PSR_SET_VERSION command. 2381 */ 2382 struct dmub_cmd_psr_set_version_data { 2383 /** 2384 * PSR version that FW should implement. 2385 */ 2386 enum psr_version version; 2387 /** 2388 * PSR control version. 2389 */ 2390 uint8_t cmd_version; 2391 /** 2392 * Panel Instance. 2393 * Panel instance to identify which psr_state to use 2394 * Currently the support is only for 0 or 1 2395 */ 2396 uint8_t panel_inst; 2397 /** 2398 * Explicit padding to 4 byte boundary. 2399 */ 2400 uint8_t pad[2]; 2401 }; 2402 2403 /** 2404 * Definition of a DMUB_CMD__PSR_SET_VERSION command. 2405 */ 2406 struct dmub_rb_cmd_psr_set_version { 2407 /** 2408 * Command header. 2409 */ 2410 struct dmub_cmd_header header; 2411 /** 2412 * Data passed from driver to FW in a DMUB_CMD__PSR_SET_VERSION command. 2413 */ 2414 struct dmub_cmd_psr_set_version_data psr_set_version_data; 2415 }; 2416 2417 struct dmub_cmd_psr_force_static_data { 2418 /** 2419 * PSR control version. 2420 */ 2421 uint8_t cmd_version; 2422 /** 2423 * Panel Instance. 2424 * Panel instance to identify which psr_state to use 2425 * Currently the support is only for 0 or 1 2426 */ 2427 uint8_t panel_inst; 2428 /** 2429 * Explicit padding to 4 byte boundary. 2430 */ 2431 uint8_t pad[2]; 2432 }; 2433 2434 /** 2435 * Definition of a DMUB_CMD__PSR_FORCE_STATIC command. 2436 */ 2437 struct dmub_rb_cmd_psr_force_static { 2438 /** 2439 * Command header. 2440 */ 2441 struct dmub_cmd_header header; 2442 /** 2443 * Data passed from driver to FW in a DMUB_CMD__PSR_FORCE_STATIC command. 2444 */ 2445 struct dmub_cmd_psr_force_static_data psr_force_static_data; 2446 }; 2447 2448 /** 2449 * PSR SU debug flags. 2450 */ 2451 union dmub_psr_su_debug_flags { 2452 /** 2453 * PSR SU debug flags. 2454 */ 2455 struct { 2456 /** 2457 * Update dirty rect in SW only. 2458 */ 2459 uint8_t update_dirty_rect_only : 1; 2460 /** 2461 * Reset the cursor/plane state before processing the call. 2462 */ 2463 uint8_t reset_state : 1; 2464 } bitfields; 2465 2466 /** 2467 * Union for debug flags. 2468 */ 2469 uint32_t u32All; 2470 }; 2471 2472 /** 2473 * Data passed from driver to FW in a DMUB_CMD__UPDATE_DIRTY_RECT command. 2474 * This triggers a selective update for PSR SU. 2475 */ 2476 struct dmub_cmd_update_dirty_rect_data { 2477 /** 2478 * Dirty rects from OS. 2479 */ 2480 struct dmub_rect src_dirty_rects[DMUB_MAX_DIRTY_RECTS]; 2481 /** 2482 * PSR SU debug flags. 2483 */ 2484 union dmub_psr_su_debug_flags debug_flags; 2485 /** 2486 * OTG HW instance. 2487 */ 2488 uint8_t pipe_idx; 2489 /** 2490 * Number of dirty rects. 2491 */ 2492 uint8_t dirty_rect_count; 2493 /** 2494 * PSR control version. 2495 */ 2496 uint8_t cmd_version; 2497 /** 2498 * Panel Instance. 2499 * Panel instance to identify which psr_state to use 2500 * Currently the support is only for 0 or 1 2501 */ 2502 uint8_t panel_inst; 2503 }; 2504 2505 /** 2506 * Definition of a DMUB_CMD__UPDATE_DIRTY_RECT command. 2507 */ 2508 struct dmub_rb_cmd_update_dirty_rect { 2509 /** 2510 * Command header. 2511 */ 2512 struct dmub_cmd_header header; 2513 /** 2514 * Data passed from driver to FW in a DMUB_CMD__UPDATE_DIRTY_RECT command. 2515 */ 2516 struct dmub_cmd_update_dirty_rect_data update_dirty_rect_data; 2517 }; 2518 2519 /** 2520 * Data passed from driver to FW in a DMUB_CMD__UPDATE_CURSOR_INFO command. 2521 */ 2522 union dmub_reg_cursor_control_cfg { 2523 struct { 2524 uint32_t cur_enable: 1; 2525 uint32_t reser0: 3; 2526 uint32_t cur_2x_magnify: 1; 2527 uint32_t reser1: 3; 2528 uint32_t mode: 3; 2529 uint32_t reser2: 5; 2530 uint32_t pitch: 2; 2531 uint32_t reser3: 6; 2532 uint32_t line_per_chunk: 5; 2533 uint32_t reser4: 3; 2534 } bits; 2535 uint32_t raw; 2536 }; 2537 struct dmub_cursor_position_cache_hubp { 2538 union dmub_reg_cursor_control_cfg cur_ctl; 2539 union dmub_reg_position_cfg { 2540 struct { 2541 uint32_t cur_x_pos: 16; 2542 uint32_t cur_y_pos: 16; 2543 } bits; 2544 uint32_t raw; 2545 } position; 2546 union dmub_reg_hot_spot_cfg { 2547 struct { 2548 uint32_t hot_x: 16; 2549 uint32_t hot_y: 16; 2550 } bits; 2551 uint32_t raw; 2552 } hot_spot; 2553 union dmub_reg_dst_offset_cfg { 2554 struct { 2555 uint32_t dst_x_offset: 13; 2556 uint32_t reserved: 19; 2557 } bits; 2558 uint32_t raw; 2559 } dst_offset; 2560 }; 2561 2562 union dmub_reg_cur0_control_cfg { 2563 struct { 2564 uint32_t cur0_enable: 1; 2565 uint32_t expansion_mode: 1; 2566 uint32_t reser0: 1; 2567 uint32_t cur0_rom_en: 1; 2568 uint32_t mode: 3; 2569 uint32_t reserved: 25; 2570 } bits; 2571 uint32_t raw; 2572 }; 2573 struct dmub_cursor_position_cache_dpp { 2574 union dmub_reg_cur0_control_cfg cur0_ctl; 2575 }; 2576 struct dmub_cursor_position_cfg { 2577 struct dmub_cursor_position_cache_hubp pHubp; 2578 struct dmub_cursor_position_cache_dpp pDpp; 2579 uint8_t pipe_idx; 2580 /* 2581 * Padding is required. To be 4 Bytes Aligned. 2582 */ 2583 uint8_t padding[3]; 2584 }; 2585 2586 struct dmub_cursor_attribute_cache_hubp { 2587 uint32_t SURFACE_ADDR_HIGH; 2588 uint32_t SURFACE_ADDR; 2589 union dmub_reg_cursor_control_cfg cur_ctl; 2590 union dmub_reg_cursor_size_cfg { 2591 struct { 2592 uint32_t width: 16; 2593 uint32_t height: 16; 2594 } bits; 2595 uint32_t raw; 2596 } size; 2597 union dmub_reg_cursor_settings_cfg { 2598 struct { 2599 uint32_t dst_y_offset: 8; 2600 uint32_t chunk_hdl_adjust: 2; 2601 uint32_t reserved: 22; 2602 } bits; 2603 uint32_t raw; 2604 } settings; 2605 }; 2606 struct dmub_cursor_attribute_cache_dpp { 2607 union dmub_reg_cur0_control_cfg cur0_ctl; 2608 }; 2609 struct dmub_cursor_attributes_cfg { 2610 struct dmub_cursor_attribute_cache_hubp aHubp; 2611 struct dmub_cursor_attribute_cache_dpp aDpp; 2612 }; 2613 2614 struct dmub_cmd_update_cursor_payload0 { 2615 /** 2616 * Cursor dirty rects. 2617 */ 2618 struct dmub_rect cursor_rect; 2619 /** 2620 * PSR SU debug flags. 2621 */ 2622 union dmub_psr_su_debug_flags debug_flags; 2623 /** 2624 * Cursor enable/disable. 2625 */ 2626 uint8_t enable; 2627 /** 2628 * OTG HW instance. 2629 */ 2630 uint8_t pipe_idx; 2631 /** 2632 * PSR control version. 2633 */ 2634 uint8_t cmd_version; 2635 /** 2636 * Panel Instance. 2637 * Panel instance to identify which psr_state to use 2638 * Currently the support is only for 0 or 1 2639 */ 2640 uint8_t panel_inst; 2641 /** 2642 * Cursor Position Register. 2643 * Registers contains Hubp & Dpp modules 2644 */ 2645 struct dmub_cursor_position_cfg position_cfg; 2646 }; 2647 2648 struct dmub_cmd_update_cursor_payload1 { 2649 struct dmub_cursor_attributes_cfg attribute_cfg; 2650 }; 2651 2652 union dmub_cmd_update_cursor_info_data { 2653 struct dmub_cmd_update_cursor_payload0 payload0; 2654 struct dmub_cmd_update_cursor_payload1 payload1; 2655 }; 2656 /** 2657 * Definition of a DMUB_CMD__UPDATE_CURSOR_INFO command. 2658 */ 2659 struct dmub_rb_cmd_update_cursor_info { 2660 /** 2661 * Command header. 2662 */ 2663 struct dmub_cmd_header header; 2664 /** 2665 * Data passed from driver to FW in a DMUB_CMD__UPDATE_CURSOR_INFO command. 2666 */ 2667 union dmub_cmd_update_cursor_info_data update_cursor_info_data; 2668 }; 2669 2670 /** 2671 * Data passed from driver to FW in a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 2672 */ 2673 struct dmub_cmd_psr_set_vtotal_data { 2674 /** 2675 * 16-bit value dicated by driver that indicates the vtotal in PSR active requirement when screen idle.. 2676 */ 2677 uint16_t psr_vtotal_idle; 2678 /** 2679 * PSR control version. 2680 */ 2681 uint8_t cmd_version; 2682 /** 2683 * Panel Instance. 2684 * Panel instance to identify which psr_state to use 2685 * Currently the support is only for 0 or 1 2686 */ 2687 uint8_t panel_inst; 2688 /* 2689 * 16-bit value dicated by driver that indicates the vtotal in PSR active requirement when doing SU/FFU. 2690 */ 2691 uint16_t psr_vtotal_su; 2692 /** 2693 * Explicit padding to 4 byte boundary. 2694 */ 2695 uint8_t pad2[2]; 2696 }; 2697 2698 /** 2699 * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 2700 */ 2701 struct dmub_rb_cmd_psr_set_vtotal { 2702 /** 2703 * Command header. 2704 */ 2705 struct dmub_cmd_header header; 2706 /** 2707 * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 2708 */ 2709 struct dmub_cmd_psr_set_vtotal_data psr_set_vtotal_data; 2710 }; 2711 2712 /** 2713 * Data passed from driver to FW in a DMUB_CMD__SET_PSR_POWER_OPT command. 2714 */ 2715 struct dmub_cmd_psr_set_power_opt_data { 2716 /** 2717 * PSR control version. 2718 */ 2719 uint8_t cmd_version; 2720 /** 2721 * Panel Instance. 2722 * Panel instance to identify which psr_state to use 2723 * Currently the support is only for 0 or 1 2724 */ 2725 uint8_t panel_inst; 2726 /** 2727 * Explicit padding to 4 byte boundary. 2728 */ 2729 uint8_t pad[2]; 2730 /** 2731 * PSR power option 2732 */ 2733 uint32_t power_opt; 2734 }; 2735 2736 #define REPLAY_RESIDENCY_MODE_SHIFT (0) 2737 #define REPLAY_RESIDENCY_ENABLE_SHIFT (1) 2738 2739 #define REPLAY_RESIDENCY_MODE_MASK (0x1 << REPLAY_RESIDENCY_MODE_SHIFT) 2740 # define REPLAY_RESIDENCY_MODE_PHY (0x0 << REPLAY_RESIDENCY_MODE_SHIFT) 2741 # define REPLAY_RESIDENCY_MODE_ALPM (0x1 << REPLAY_RESIDENCY_MODE_SHIFT) 2742 2743 #define REPLAY_RESIDENCY_ENABLE_MASK (0x1 << REPLAY_RESIDENCY_ENABLE_SHIFT) 2744 # define REPLAY_RESIDENCY_DISABLE (0x0 << REPLAY_RESIDENCY_ENABLE_SHIFT) 2745 # define REPLAY_RESIDENCY_ENABLE (0x1 << REPLAY_RESIDENCY_ENABLE_SHIFT) 2746 2747 enum replay_state { 2748 REPLAY_STATE_0 = 0x0, 2749 REPLAY_STATE_1 = 0x10, 2750 REPLAY_STATE_1A = 0x11, 2751 REPLAY_STATE_2 = 0x20, 2752 REPLAY_STATE_3 = 0x30, 2753 REPLAY_STATE_3INIT = 0x31, 2754 REPLAY_STATE_4 = 0x40, 2755 REPLAY_STATE_4A = 0x41, 2756 REPLAY_STATE_4B = 0x42, 2757 REPLAY_STATE_4C = 0x43, 2758 REPLAY_STATE_4D = 0x44, 2759 REPLAY_STATE_4B_LOCKED = 0x4A, 2760 REPLAY_STATE_4C_UNLOCKED = 0x4B, 2761 REPLAY_STATE_5 = 0x50, 2762 REPLAY_STATE_5A = 0x51, 2763 REPLAY_STATE_5B = 0x52, 2764 REPLAY_STATE_5A_LOCKED = 0x5A, 2765 REPLAY_STATE_5B_UNLOCKED = 0x5B, 2766 REPLAY_STATE_6 = 0x60, 2767 REPLAY_STATE_6A = 0x61, 2768 REPLAY_STATE_6B = 0x62, 2769 REPLAY_STATE_INVALID = 0xFF, 2770 }; 2771 2772 /** 2773 * Replay command sub-types. 2774 */ 2775 enum dmub_cmd_replay_type { 2776 /** 2777 * Copy driver-calculated parameters to REPLAY state. 2778 */ 2779 DMUB_CMD__REPLAY_COPY_SETTINGS = 0, 2780 /** 2781 * Enable REPLAY. 2782 */ 2783 DMUB_CMD__REPLAY_ENABLE = 1, 2784 /** 2785 * Set Replay power option. 2786 */ 2787 DMUB_CMD__SET_REPLAY_POWER_OPT = 2, 2788 /** 2789 * Set coasting vtotal. 2790 */ 2791 DMUB_CMD__REPLAY_SET_COASTING_VTOTAL = 3, 2792 }; 2793 2794 /** 2795 * Data passed from driver to FW in a DMUB_CMD__REPLAY_COPY_SETTINGS command. 2796 */ 2797 struct dmub_cmd_replay_copy_settings_data { 2798 /** 2799 * Flags that can be set by driver to change some replay behaviour. 2800 */ 2801 union replay_debug_flags debug; 2802 2803 /** 2804 * @flags: Flags used to determine feature functionality. 2805 */ 2806 union replay_hw_flags flags; 2807 2808 /** 2809 * DPP HW instance. 2810 */ 2811 uint8_t dpp_inst; 2812 /** 2813 * OTG HW instance. 2814 */ 2815 uint8_t otg_inst; 2816 /** 2817 * DIG FE HW instance. 2818 */ 2819 uint8_t digfe_inst; 2820 /** 2821 * DIG BE HW instance. 2822 */ 2823 uint8_t digbe_inst; 2824 /** 2825 * AUX HW instance. 2826 */ 2827 uint8_t aux_inst; 2828 /** 2829 * Panel Instance. 2830 * Panel isntance to identify which psr_state to use 2831 * Currently the support is only for 0 or 1 2832 */ 2833 uint8_t panel_inst; 2834 /** 2835 * @pixel_deviation_per_line: Indicate the maximum pixel deviation per line compare 2836 * to Source timing when Sink maintains coasting vtotal during the Replay normal sleep mode 2837 */ 2838 uint8_t pixel_deviation_per_line; 2839 /** 2840 * @max_deviation_line: The max number of deviation line that can keep the timing 2841 * synchronized between the Source and Sink during Replay normal sleep mode. 2842 */ 2843 uint8_t max_deviation_line; 2844 /** 2845 * Length of each horizontal line in ns. 2846 */ 2847 uint32_t line_time_in_ns; 2848 /** 2849 * PHY instance. 2850 */ 2851 uint8_t dpphy_inst; 2852 /** 2853 * Determines if SMU optimzations are enabled/disabled. 2854 */ 2855 uint8_t smu_optimizations_en; 2856 /** 2857 * Determines if timing sync are enabled/disabled. 2858 */ 2859 uint8_t replay_timing_sync_supported; 2860 /* 2861 * Use FSM state for Replay power up/down 2862 */ 2863 uint8_t use_phy_fsm; 2864 }; 2865 2866 /** 2867 * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. 2868 */ 2869 struct dmub_rb_cmd_replay_copy_settings { 2870 /** 2871 * Command header. 2872 */ 2873 struct dmub_cmd_header header; 2874 /** 2875 * Data passed from driver to FW in a DMUB_CMD__REPLAY_COPY_SETTINGS command. 2876 */ 2877 struct dmub_cmd_replay_copy_settings_data replay_copy_settings_data; 2878 }; 2879 2880 /** 2881 * Replay disable / enable state for dmub_rb_cmd_replay_enable_data.enable 2882 */ 2883 enum replay_enable { 2884 /** 2885 * Disable REPLAY. 2886 */ 2887 REPLAY_DISABLE = 0, 2888 /** 2889 * Enable REPLAY. 2890 */ 2891 REPLAY_ENABLE = 1, 2892 }; 2893 2894 /** 2895 * Data passed from driver to FW in a DMUB_CMD__REPLAY_ENABLE command. 2896 */ 2897 struct dmub_rb_cmd_replay_enable_data { 2898 /** 2899 * Replay enable or disable. 2900 */ 2901 uint8_t enable; 2902 /** 2903 * Panel Instance. 2904 * Panel isntance to identify which replay_state to use 2905 * Currently the support is only for 0 or 1 2906 */ 2907 uint8_t panel_inst; 2908 /** 2909 * Phy state to enter. 2910 * Values to use are defined in dmub_phy_fsm_state 2911 */ 2912 uint8_t phy_fsm_state; 2913 /** 2914 * Phy rate for DP - RBR/HBR/HBR2/HBR3. 2915 * Set this using enum phy_link_rate. 2916 * This does not support HDMI/DP2 for now. 2917 */ 2918 uint8_t phy_rate; 2919 }; 2920 2921 /** 2922 * Definition of a DMUB_CMD__REPLAY_ENABLE command. 2923 * Replay enable/disable is controlled using action in data. 2924 */ 2925 struct dmub_rb_cmd_replay_enable { 2926 /** 2927 * Command header. 2928 */ 2929 struct dmub_cmd_header header; 2930 2931 struct dmub_rb_cmd_replay_enable_data data; 2932 }; 2933 2934 /** 2935 * Data passed from driver to FW in a DMUB_CMD__SET_REPLAY_POWER_OPT command. 2936 */ 2937 struct dmub_cmd_replay_set_power_opt_data { 2938 /** 2939 * Panel Instance. 2940 * Panel isntance to identify which replay_state to use 2941 * Currently the support is only for 0 or 1 2942 */ 2943 uint8_t panel_inst; 2944 /** 2945 * Explicit padding to 4 byte boundary. 2946 */ 2947 uint8_t pad[3]; 2948 /** 2949 * REPLAY power option 2950 */ 2951 uint32_t power_opt; 2952 }; 2953 2954 /** 2955 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 2956 */ 2957 struct dmub_rb_cmd_replay_set_power_opt { 2958 /** 2959 * Command header. 2960 */ 2961 struct dmub_cmd_header header; 2962 /** 2963 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 2964 */ 2965 struct dmub_cmd_replay_set_power_opt_data replay_set_power_opt_data; 2966 }; 2967 2968 /** 2969 * Data passed from driver to FW in a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 2970 */ 2971 struct dmub_cmd_replay_set_coasting_vtotal_data { 2972 /** 2973 * 16-bit value dicated by driver that indicates the coasting vtotal. 2974 */ 2975 uint16_t coasting_vtotal; 2976 /** 2977 * REPLAY control version. 2978 */ 2979 uint8_t cmd_version; 2980 /** 2981 * Panel Instance. 2982 * Panel isntance to identify which replay_state to use 2983 * Currently the support is only for 0 or 1 2984 */ 2985 uint8_t panel_inst; 2986 }; 2987 2988 /** 2989 * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 2990 */ 2991 struct dmub_rb_cmd_replay_set_coasting_vtotal { 2992 /** 2993 * Command header. 2994 */ 2995 struct dmub_cmd_header header; 2996 /** 2997 * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 2998 */ 2999 struct dmub_cmd_replay_set_coasting_vtotal_data replay_set_coasting_vtotal_data; 3000 }; 3001 3002 /** 3003 * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. 3004 */ 3005 struct dmub_rb_cmd_psr_set_power_opt { 3006 /** 3007 * Command header. 3008 */ 3009 struct dmub_cmd_header header; 3010 /** 3011 * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. 3012 */ 3013 struct dmub_cmd_psr_set_power_opt_data psr_set_power_opt_data; 3014 }; 3015 3016 /** 3017 * Set of HW components that can be locked. 3018 * 3019 * Note: If updating with more HW components, fields 3020 * in dmub_inbox0_cmd_lock_hw must be updated to match. 3021 */ 3022 union dmub_hw_lock_flags { 3023 /** 3024 * Set of HW components that can be locked. 3025 */ 3026 struct { 3027 /** 3028 * Lock/unlock OTG master update lock. 3029 */ 3030 uint8_t lock_pipe : 1; 3031 /** 3032 * Lock/unlock cursor. 3033 */ 3034 uint8_t lock_cursor : 1; 3035 /** 3036 * Lock/unlock global update lock. 3037 */ 3038 uint8_t lock_dig : 1; 3039 /** 3040 * Triple buffer lock requires additional hw programming to usual OTG master lock. 3041 */ 3042 uint8_t triple_buffer_lock : 1; 3043 } bits; 3044 3045 /** 3046 * Union for HW Lock flags. 3047 */ 3048 uint8_t u8All; 3049 }; 3050 3051 /** 3052 * Instances of HW to be locked. 3053 * 3054 * Note: If updating with more HW components, fields 3055 * in dmub_inbox0_cmd_lock_hw must be updated to match. 3056 */ 3057 struct dmub_hw_lock_inst_flags { 3058 /** 3059 * OTG HW instance for OTG master update lock. 3060 */ 3061 uint8_t otg_inst; 3062 /** 3063 * OPP instance for cursor lock. 3064 */ 3065 uint8_t opp_inst; 3066 /** 3067 * OTG HW instance for global update lock. 3068 * TODO: Remove, and re-use otg_inst. 3069 */ 3070 uint8_t dig_inst; 3071 /** 3072 * Explicit pad to 4 byte boundary. 3073 */ 3074 uint8_t pad; 3075 }; 3076 3077 /** 3078 * Clients that can acquire the HW Lock Manager. 3079 * 3080 * Note: If updating with more clients, fields in 3081 * dmub_inbox0_cmd_lock_hw must be updated to match. 3082 */ 3083 enum hw_lock_client { 3084 /** 3085 * Driver is the client of HW Lock Manager. 3086 */ 3087 HW_LOCK_CLIENT_DRIVER = 0, 3088 /** 3089 * PSR SU is the client of HW Lock Manager. 3090 */ 3091 HW_LOCK_CLIENT_PSR_SU = 1, 3092 /** 3093 * Replay is the client of HW Lock Manager. 3094 */ 3095 HW_LOCK_CLIENT_REPLAY = 4, 3096 /** 3097 * Invalid client. 3098 */ 3099 HW_LOCK_CLIENT_INVALID = 0xFFFFFFFF, 3100 }; 3101 3102 /** 3103 * Data passed to HW Lock Mgr in a DMUB_CMD__HW_LOCK command. 3104 */ 3105 struct dmub_cmd_lock_hw_data { 3106 /** 3107 * Specifies the client accessing HW Lock Manager. 3108 */ 3109 enum hw_lock_client client; 3110 /** 3111 * HW instances to be locked. 3112 */ 3113 struct dmub_hw_lock_inst_flags inst_flags; 3114 /** 3115 * Which components to be locked. 3116 */ 3117 union dmub_hw_lock_flags hw_locks; 3118 /** 3119 * Specifies lock/unlock. 3120 */ 3121 uint8_t lock; 3122 /** 3123 * HW can be unlocked separately from releasing the HW Lock Mgr. 3124 * This flag is set if the client wishes to release the object. 3125 */ 3126 uint8_t should_release; 3127 /** 3128 * Explicit padding to 4 byte boundary. 3129 */ 3130 uint8_t pad; 3131 }; 3132 3133 /** 3134 * Definition of a DMUB_CMD__HW_LOCK command. 3135 * Command is used by driver and FW. 3136 */ 3137 struct dmub_rb_cmd_lock_hw { 3138 /** 3139 * Command header. 3140 */ 3141 struct dmub_cmd_header header; 3142 /** 3143 * Data passed to HW Lock Mgr in a DMUB_CMD__HW_LOCK command. 3144 */ 3145 struct dmub_cmd_lock_hw_data lock_hw_data; 3146 }; 3147 3148 /** 3149 * ABM command sub-types. 3150 */ 3151 enum dmub_cmd_abm_type { 3152 /** 3153 * Initialize parameters for ABM algorithm. 3154 * Data is passed through an indirect buffer. 3155 */ 3156 DMUB_CMD__ABM_INIT_CONFIG = 0, 3157 /** 3158 * Set OTG and panel HW instance. 3159 */ 3160 DMUB_CMD__ABM_SET_PIPE = 1, 3161 /** 3162 * Set user requested backklight level. 3163 */ 3164 DMUB_CMD__ABM_SET_BACKLIGHT = 2, 3165 /** 3166 * Set ABM operating/aggression level. 3167 */ 3168 DMUB_CMD__ABM_SET_LEVEL = 3, 3169 /** 3170 * Set ambient light level. 3171 */ 3172 DMUB_CMD__ABM_SET_AMBIENT_LEVEL = 4, 3173 /** 3174 * Enable/disable fractional duty cycle for backlight PWM. 3175 */ 3176 DMUB_CMD__ABM_SET_PWM_FRAC = 5, 3177 3178 /** 3179 * unregister vertical interrupt after steady state is reached 3180 */ 3181 DMUB_CMD__ABM_PAUSE = 6, 3182 3183 /** 3184 * Save and Restore ABM state. On save we save parameters, and 3185 * on restore we update state with passed in data. 3186 */ 3187 DMUB_CMD__ABM_SAVE_RESTORE = 7, 3188 }; 3189 3190 /** 3191 * Parameters for ABM2.4 algorithm. Passed from driver to FW via an indirect buffer. 3192 * Requirements: 3193 * - Padded explicitly to 32-bit boundary. 3194 * - Must ensure this structure matches the one on driver-side, 3195 * otherwise it won't be aligned. 3196 */ 3197 struct abm_config_table { 3198 /** 3199 * Gamma curve thresholds, used for crgb conversion. 3200 */ 3201 uint16_t crgb_thresh[NUM_POWER_FN_SEGS]; // 0B 3202 /** 3203 * Gamma curve offsets, used for crgb conversion. 3204 */ 3205 uint16_t crgb_offset[NUM_POWER_FN_SEGS]; // 16B 3206 /** 3207 * Gamma curve slopes, used for crgb conversion. 3208 */ 3209 uint16_t crgb_slope[NUM_POWER_FN_SEGS]; // 32B 3210 /** 3211 * Custom backlight curve thresholds. 3212 */ 3213 uint16_t backlight_thresholds[NUM_BL_CURVE_SEGS]; // 48B 3214 /** 3215 * Custom backlight curve offsets. 3216 */ 3217 uint16_t backlight_offsets[NUM_BL_CURVE_SEGS]; // 78B 3218 /** 3219 * Ambient light thresholds. 3220 */ 3221 uint16_t ambient_thresholds_lux[NUM_AMBI_LEVEL]; // 112B 3222 /** 3223 * Minimum programmable backlight. 3224 */ 3225 uint16_t min_abm_backlight; // 122B 3226 /** 3227 * Minimum reduction values. 3228 */ 3229 uint8_t min_reduction[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 124B 3230 /** 3231 * Maximum reduction values. 3232 */ 3233 uint8_t max_reduction[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 144B 3234 /** 3235 * Bright positive gain. 3236 */ 3237 uint8_t bright_pos_gain[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 164B 3238 /** 3239 * Dark negative gain. 3240 */ 3241 uint8_t dark_pos_gain[NUM_AMBI_LEVEL][NUM_AGGR_LEVEL]; // 184B 3242 /** 3243 * Hybrid factor. 3244 */ 3245 uint8_t hybrid_factor[NUM_AGGR_LEVEL]; // 204B 3246 /** 3247 * Contrast factor. 3248 */ 3249 uint8_t contrast_factor[NUM_AGGR_LEVEL]; // 208B 3250 /** 3251 * Deviation gain. 3252 */ 3253 uint8_t deviation_gain[NUM_AGGR_LEVEL]; // 212B 3254 /** 3255 * Minimum knee. 3256 */ 3257 uint8_t min_knee[NUM_AGGR_LEVEL]; // 216B 3258 /** 3259 * Maximum knee. 3260 */ 3261 uint8_t max_knee[NUM_AGGR_LEVEL]; // 220B 3262 /** 3263 * Unused. 3264 */ 3265 uint8_t iir_curve[NUM_AMBI_LEVEL]; // 224B 3266 /** 3267 * Explicit padding to 4 byte boundary. 3268 */ 3269 uint8_t pad3[3]; // 229B 3270 /** 3271 * Backlight ramp reduction. 3272 */ 3273 uint16_t blRampReduction[NUM_AGGR_LEVEL]; // 232B 3274 /** 3275 * Backlight ramp start. 3276 */ 3277 uint16_t blRampStart[NUM_AGGR_LEVEL]; // 240B 3278 }; 3279 3280 /** 3281 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PIPE command. 3282 */ 3283 struct dmub_cmd_abm_set_pipe_data { 3284 /** 3285 * OTG HW instance. 3286 */ 3287 uint8_t otg_inst; 3288 3289 /** 3290 * Panel Control HW instance. 3291 */ 3292 uint8_t panel_inst; 3293 3294 /** 3295 * Controls how ABM will interpret a set pipe or set level command. 3296 */ 3297 uint8_t set_pipe_option; 3298 3299 /** 3300 * Unused. 3301 * TODO: Remove. 3302 */ 3303 uint8_t ramping_boundary; 3304 }; 3305 3306 /** 3307 * Definition of a DMUB_CMD__ABM_SET_PIPE command. 3308 */ 3309 struct dmub_rb_cmd_abm_set_pipe { 3310 /** 3311 * Command header. 3312 */ 3313 struct dmub_cmd_header header; 3314 3315 /** 3316 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PIPE command. 3317 */ 3318 struct dmub_cmd_abm_set_pipe_data abm_set_pipe_data; 3319 }; 3320 3321 /** 3322 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_BACKLIGHT command. 3323 */ 3324 struct dmub_cmd_abm_set_backlight_data { 3325 /** 3326 * Number of frames to ramp to backlight user level. 3327 */ 3328 uint32_t frame_ramp; 3329 3330 /** 3331 * Requested backlight level from user. 3332 */ 3333 uint32_t backlight_user_level; 3334 3335 /** 3336 * ABM control version. 3337 */ 3338 uint8_t version; 3339 3340 /** 3341 * Panel Control HW instance mask. 3342 * Bit 0 is Panel Control HW instance 0. 3343 * Bit 1 is Panel Control HW instance 1. 3344 */ 3345 uint8_t panel_mask; 3346 3347 /** 3348 * Explicit padding to 4 byte boundary. 3349 */ 3350 uint8_t pad[2]; 3351 }; 3352 3353 /** 3354 * Definition of a DMUB_CMD__ABM_SET_BACKLIGHT command. 3355 */ 3356 struct dmub_rb_cmd_abm_set_backlight { 3357 /** 3358 * Command header. 3359 */ 3360 struct dmub_cmd_header header; 3361 3362 /** 3363 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_BACKLIGHT command. 3364 */ 3365 struct dmub_cmd_abm_set_backlight_data abm_set_backlight_data; 3366 }; 3367 3368 /** 3369 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_LEVEL command. 3370 */ 3371 struct dmub_cmd_abm_set_level_data { 3372 /** 3373 * Set current ABM operating/aggression level. 3374 */ 3375 uint32_t level; 3376 3377 /** 3378 * ABM control version. 3379 */ 3380 uint8_t version; 3381 3382 /** 3383 * Panel Control HW instance mask. 3384 * Bit 0 is Panel Control HW instance 0. 3385 * Bit 1 is Panel Control HW instance 1. 3386 */ 3387 uint8_t panel_mask; 3388 3389 /** 3390 * Explicit padding to 4 byte boundary. 3391 */ 3392 uint8_t pad[2]; 3393 }; 3394 3395 /** 3396 * Definition of a DMUB_CMD__ABM_SET_LEVEL command. 3397 */ 3398 struct dmub_rb_cmd_abm_set_level { 3399 /** 3400 * Command header. 3401 */ 3402 struct dmub_cmd_header header; 3403 3404 /** 3405 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_LEVEL command. 3406 */ 3407 struct dmub_cmd_abm_set_level_data abm_set_level_data; 3408 }; 3409 3410 /** 3411 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 3412 */ 3413 struct dmub_cmd_abm_set_ambient_level_data { 3414 /** 3415 * Ambient light sensor reading from OS. 3416 */ 3417 uint32_t ambient_lux; 3418 3419 /** 3420 * ABM control version. 3421 */ 3422 uint8_t version; 3423 3424 /** 3425 * Panel Control HW instance mask. 3426 * Bit 0 is Panel Control HW instance 0. 3427 * Bit 1 is Panel Control HW instance 1. 3428 */ 3429 uint8_t panel_mask; 3430 3431 /** 3432 * Explicit padding to 4 byte boundary. 3433 */ 3434 uint8_t pad[2]; 3435 }; 3436 3437 /** 3438 * Definition of a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 3439 */ 3440 struct dmub_rb_cmd_abm_set_ambient_level { 3441 /** 3442 * Command header. 3443 */ 3444 struct dmub_cmd_header header; 3445 3446 /** 3447 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 3448 */ 3449 struct dmub_cmd_abm_set_ambient_level_data abm_set_ambient_level_data; 3450 }; 3451 3452 /** 3453 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PWM_FRAC command. 3454 */ 3455 struct dmub_cmd_abm_set_pwm_frac_data { 3456 /** 3457 * Enable/disable fractional duty cycle for backlight PWM. 3458 * TODO: Convert to uint8_t. 3459 */ 3460 uint32_t fractional_pwm; 3461 3462 /** 3463 * ABM control version. 3464 */ 3465 uint8_t version; 3466 3467 /** 3468 * Panel Control HW instance mask. 3469 * Bit 0 is Panel Control HW instance 0. 3470 * Bit 1 is Panel Control HW instance 1. 3471 */ 3472 uint8_t panel_mask; 3473 3474 /** 3475 * Explicit padding to 4 byte boundary. 3476 */ 3477 uint8_t pad[2]; 3478 }; 3479 3480 /** 3481 * Definition of a DMUB_CMD__ABM_SET_PWM_FRAC command. 3482 */ 3483 struct dmub_rb_cmd_abm_set_pwm_frac { 3484 /** 3485 * Command header. 3486 */ 3487 struct dmub_cmd_header header; 3488 3489 /** 3490 * Data passed from driver to FW in a DMUB_CMD__ABM_SET_PWM_FRAC command. 3491 */ 3492 struct dmub_cmd_abm_set_pwm_frac_data abm_set_pwm_frac_data; 3493 }; 3494 3495 /** 3496 * Data passed from driver to FW in a DMUB_CMD__ABM_INIT_CONFIG command. 3497 */ 3498 struct dmub_cmd_abm_init_config_data { 3499 /** 3500 * Location of indirect buffer used to pass init data to ABM. 3501 */ 3502 union dmub_addr src; 3503 3504 /** 3505 * Indirect buffer length. 3506 */ 3507 uint16_t bytes; 3508 3509 3510 /** 3511 * ABM control version. 3512 */ 3513 uint8_t version; 3514 3515 /** 3516 * Panel Control HW instance mask. 3517 * Bit 0 is Panel Control HW instance 0. 3518 * Bit 1 is Panel Control HW instance 1. 3519 */ 3520 uint8_t panel_mask; 3521 3522 /** 3523 * Explicit padding to 4 byte boundary. 3524 */ 3525 uint8_t pad[2]; 3526 }; 3527 3528 /** 3529 * Definition of a DMUB_CMD__ABM_INIT_CONFIG command. 3530 */ 3531 struct dmub_rb_cmd_abm_init_config { 3532 /** 3533 * Command header. 3534 */ 3535 struct dmub_cmd_header header; 3536 3537 /** 3538 * Data passed from driver to FW in a DMUB_CMD__ABM_INIT_CONFIG command. 3539 */ 3540 struct dmub_cmd_abm_init_config_data abm_init_config_data; 3541 }; 3542 3543 /** 3544 * Data passed from driver to FW in a DMUB_CMD__ABM_PAUSE command. 3545 */ 3546 3547 struct dmub_cmd_abm_pause_data { 3548 3549 /** 3550 * Panel Control HW instance mask. 3551 * Bit 0 is Panel Control HW instance 0. 3552 * Bit 1 is Panel Control HW instance 1. 3553 */ 3554 uint8_t panel_mask; 3555 3556 /** 3557 * OTG hw instance 3558 */ 3559 uint8_t otg_inst; 3560 3561 /** 3562 * Enable or disable ABM pause 3563 */ 3564 uint8_t enable; 3565 3566 /** 3567 * Explicit padding to 4 byte boundary. 3568 */ 3569 uint8_t pad[1]; 3570 }; 3571 3572 3573 /** 3574 * Definition of a DMUB_CMD__ABM_PAUSE command. 3575 */ 3576 struct dmub_rb_cmd_abm_pause { 3577 /** 3578 * Command header. 3579 */ 3580 struct dmub_cmd_header header; 3581 3582 /** 3583 * Data passed from driver to FW in a DMUB_CMD__ABM_PAUSE command. 3584 */ 3585 struct dmub_cmd_abm_pause_data abm_pause_data; 3586 }; 3587 3588 /** 3589 * Definition of a DMUB_CMD__ABM_SAVE_RESTORE command. 3590 */ 3591 struct dmub_rb_cmd_abm_save_restore { 3592 /** 3593 * Command header. 3594 */ 3595 struct dmub_cmd_header header; 3596 3597 /** 3598 * OTG hw instance 3599 */ 3600 uint8_t otg_inst; 3601 3602 /** 3603 * Enable or disable ABM pause 3604 */ 3605 uint8_t freeze; 3606 3607 /** 3608 * Explicit padding to 4 byte boundary. 3609 */ 3610 uint8_t debug; 3611 3612 /** 3613 * Data passed from driver to FW in a DMUB_CMD__ABM_INIT_CONFIG command. 3614 */ 3615 struct dmub_cmd_abm_init_config_data abm_init_config_data; 3616 }; 3617 3618 /** 3619 * Data passed from driver to FW in a DMUB_CMD__QUERY_FEATURE_CAPS command. 3620 */ 3621 struct dmub_cmd_query_feature_caps_data { 3622 /** 3623 * DMUB feature capabilities. 3624 * After DMUB init, driver will query FW capabilities prior to enabling certain features. 3625 */ 3626 struct dmub_feature_caps feature_caps; 3627 }; 3628 3629 /** 3630 * Definition of a DMUB_CMD__QUERY_FEATURE_CAPS command. 3631 */ 3632 struct dmub_rb_cmd_query_feature_caps { 3633 /** 3634 * Command header. 3635 */ 3636 struct dmub_cmd_header header; 3637 /** 3638 * Data passed from driver to FW in a DMUB_CMD__QUERY_FEATURE_CAPS command. 3639 */ 3640 struct dmub_cmd_query_feature_caps_data query_feature_caps_data; 3641 }; 3642 3643 /** 3644 * Data passed from driver to FW in a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 3645 */ 3646 struct dmub_cmd_visual_confirm_color_data { 3647 /** 3648 * DMUB feature capabilities. 3649 * After DMUB init, driver will query FW capabilities prior to enabling certain features. 3650 */ 3651 struct dmub_visual_confirm_color visual_confirm_color; 3652 }; 3653 3654 /** 3655 * Definition of a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 3656 */ 3657 struct dmub_rb_cmd_get_visual_confirm_color { 3658 /** 3659 * Command header. 3660 */ 3661 struct dmub_cmd_header header; 3662 /** 3663 * Data passed from driver to FW in a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 3664 */ 3665 struct dmub_cmd_visual_confirm_color_data visual_confirm_color_data; 3666 }; 3667 3668 struct dmub_optc_state { 3669 uint32_t v_total_max; 3670 uint32_t v_total_min; 3671 uint32_t tg_inst; 3672 }; 3673 3674 struct dmub_rb_cmd_drr_update { 3675 struct dmub_cmd_header header; 3676 struct dmub_optc_state dmub_optc_state_req; 3677 }; 3678 3679 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data { 3680 uint32_t pix_clk_100hz; 3681 uint8_t max_ramp_step; 3682 uint8_t pipes; 3683 uint8_t min_refresh_in_hz; 3684 uint8_t pipe_count; 3685 uint8_t pipe_index[4]; 3686 }; 3687 3688 struct dmub_cmd_fw_assisted_mclk_switch_config { 3689 uint8_t fams_enabled; 3690 uint8_t visual_confirm_enabled; 3691 uint16_t vactive_stretch_margin_us; // Extra vblank stretch required when doing FPO + Vactive 3692 struct dmub_cmd_fw_assisted_mclk_switch_pipe_data pipe_data[DMUB_MAX_FPO_STREAMS]; 3693 }; 3694 3695 struct dmub_rb_cmd_fw_assisted_mclk_switch { 3696 struct dmub_cmd_header header; 3697 struct dmub_cmd_fw_assisted_mclk_switch_config config_data; 3698 }; 3699 3700 /** 3701 * enum dmub_cmd_panel_cntl_type - Panel control command. 3702 */ 3703 enum dmub_cmd_panel_cntl_type { 3704 /** 3705 * Initializes embedded panel hardware blocks. 3706 */ 3707 DMUB_CMD__PANEL_CNTL_HW_INIT = 0, 3708 /** 3709 * Queries backlight info for the embedded panel. 3710 */ 3711 DMUB_CMD__PANEL_CNTL_QUERY_BACKLIGHT_INFO = 1, 3712 }; 3713 3714 /** 3715 * struct dmub_cmd_panel_cntl_data - Panel control data. 3716 */ 3717 struct dmub_cmd_panel_cntl_data { 3718 uint32_t inst; /**< panel instance */ 3719 uint32_t current_backlight; /* in/out */ 3720 uint32_t bl_pwm_cntl; /* in/out */ 3721 uint32_t bl_pwm_period_cntl; /* in/out */ 3722 uint32_t bl_pwm_ref_div1; /* in/out */ 3723 uint8_t is_backlight_on : 1; /* in/out */ 3724 uint8_t is_powered_on : 1; /* in/out */ 3725 uint8_t padding[3]; 3726 uint32_t bl_pwm_ref_div2; /* in/out */ 3727 uint8_t reserved[4]; 3728 }; 3729 3730 /** 3731 * struct dmub_rb_cmd_panel_cntl - Panel control command. 3732 */ 3733 struct dmub_rb_cmd_panel_cntl { 3734 struct dmub_cmd_header header; /**< header */ 3735 struct dmub_cmd_panel_cntl_data data; /**< payload */ 3736 }; 3737 3738 /** 3739 * Data passed from driver to FW in a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 3740 */ 3741 struct dmub_cmd_lvtma_control_data { 3742 uint8_t uc_pwr_action; /**< LVTMA_ACTION */ 3743 uint8_t bypass_panel_control_wait; 3744 uint8_t reserved_0[2]; /**< For future use */ 3745 uint8_t panel_inst; /**< LVTMA control instance */ 3746 uint8_t reserved_1[3]; /**< For future use */ 3747 }; 3748 3749 /** 3750 * Definition of a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 3751 */ 3752 struct dmub_rb_cmd_lvtma_control { 3753 /** 3754 * Command header. 3755 */ 3756 struct dmub_cmd_header header; 3757 /** 3758 * Data passed from driver to FW in a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 3759 */ 3760 struct dmub_cmd_lvtma_control_data data; 3761 }; 3762 3763 /** 3764 * Data passed in/out in a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. 3765 */ 3766 struct dmub_rb_cmd_transmitter_query_dp_alt_data { 3767 uint8_t phy_id; /**< 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4=UNIPHYE, 5=UNIPHYF */ 3768 uint8_t is_usb; /**< is phy is usb */ 3769 uint8_t is_dp_alt_disable; /**< is dp alt disable */ 3770 uint8_t is_dp4; /**< is dp in 4 lane */ 3771 }; 3772 3773 /** 3774 * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. 3775 */ 3776 struct dmub_rb_cmd_transmitter_query_dp_alt { 3777 struct dmub_cmd_header header; /**< header */ 3778 struct dmub_rb_cmd_transmitter_query_dp_alt_data data; /**< payload */ 3779 }; 3780 3781 /** 3782 * Maximum number of bytes a chunk sent to DMUB for parsing 3783 */ 3784 #define DMUB_EDID_CEA_DATA_CHUNK_BYTES 8 3785 3786 /** 3787 * Represent a chunk of CEA blocks sent to DMUB for parsing 3788 */ 3789 struct dmub_cmd_send_edid_cea { 3790 uint16_t offset; /**< offset into the CEA block */ 3791 uint8_t length; /**< number of bytes in payload to copy as part of CEA block */ 3792 uint16_t cea_total_length; /**< total length of the CEA block */ 3793 uint8_t payload[DMUB_EDID_CEA_DATA_CHUNK_BYTES]; /**< data chunk of the CEA block */ 3794 uint8_t pad[3]; /**< padding and for future expansion */ 3795 }; 3796 3797 /** 3798 * Result of VSDB parsing from CEA block 3799 */ 3800 struct dmub_cmd_edid_cea_amd_vsdb { 3801 uint8_t vsdb_found; /**< 1 if parsing has found valid AMD VSDB */ 3802 uint8_t freesync_supported; /**< 1 if Freesync is supported */ 3803 uint16_t amd_vsdb_version; /**< AMD VSDB version */ 3804 uint16_t min_frame_rate; /**< Maximum frame rate */ 3805 uint16_t max_frame_rate; /**< Minimum frame rate */ 3806 }; 3807 3808 /** 3809 * Result of sending a CEA chunk 3810 */ 3811 struct dmub_cmd_edid_cea_ack { 3812 uint16_t offset; /**< offset of the chunk into the CEA block */ 3813 uint8_t success; /**< 1 if this sending of chunk succeeded */ 3814 uint8_t pad; /**< padding and for future expansion */ 3815 }; 3816 3817 /** 3818 * Specify whether the result is an ACK/NACK or the parsing has finished 3819 */ 3820 enum dmub_cmd_edid_cea_reply_type { 3821 DMUB_CMD__EDID_CEA_AMD_VSDB = 1, /**< VSDB parsing has finished */ 3822 DMUB_CMD__EDID_CEA_ACK = 2, /**< acknowledges the CEA sending is OK or failing */ 3823 }; 3824 3825 /** 3826 * Definition of a DMUB_CMD__EDID_CEA command. 3827 */ 3828 struct dmub_rb_cmd_edid_cea { 3829 struct dmub_cmd_header header; /**< Command header */ 3830 union dmub_cmd_edid_cea_data { 3831 struct dmub_cmd_send_edid_cea input; /**< input to send CEA chunks */ 3832 struct dmub_cmd_edid_cea_output { /**< output with results */ 3833 uint8_t type; /**< dmub_cmd_edid_cea_reply_type */ 3834 union { 3835 struct dmub_cmd_edid_cea_amd_vsdb amd_vsdb; 3836 struct dmub_cmd_edid_cea_ack ack; 3837 }; 3838 } output; /**< output to retrieve ACK/NACK or VSDB parsing results */ 3839 } data; /**< Command data */ 3840 3841 }; 3842 3843 /** 3844 * struct dmub_cmd_cable_id_input - Defines the input of DMUB_CMD_GET_USBC_CABLE_ID command. 3845 */ 3846 struct dmub_cmd_cable_id_input { 3847 uint8_t phy_inst; /**< phy inst for cable id data */ 3848 }; 3849 3850 /** 3851 * struct dmub_cmd_cable_id_input - Defines the output of DMUB_CMD_GET_USBC_CABLE_ID command. 3852 */ 3853 struct dmub_cmd_cable_id_output { 3854 uint8_t UHBR10_20_CAPABILITY :2; /**< b'01 for UHBR10 support, b'10 for both UHBR10 and UHBR20 support */ 3855 uint8_t UHBR13_5_CAPABILITY :1; /**< b'1 for UHBR13.5 support */ 3856 uint8_t CABLE_TYPE :3; /**< b'01 for passive cable, b'10 for active LRD cable, b'11 for active retimer cable */ 3857 uint8_t RESERVED :2; /**< reserved means not defined */ 3858 }; 3859 3860 /** 3861 * Definition of a DMUB_CMD_GET_USBC_CABLE_ID command 3862 */ 3863 struct dmub_rb_cmd_get_usbc_cable_id { 3864 struct dmub_cmd_header header; /**< Command header */ 3865 /** 3866 * Data passed from driver to FW in a DMUB_CMD_GET_USBC_CABLE_ID command. 3867 */ 3868 union dmub_cmd_cable_id_data { 3869 struct dmub_cmd_cable_id_input input; /**< Input */ 3870 struct dmub_cmd_cable_id_output output; /**< Output */ 3871 uint8_t output_raw; /**< Raw data output */ 3872 } data; 3873 }; 3874 3875 /** 3876 * Command type of a DMUB_CMD__SECURE_DISPLAY command 3877 */ 3878 enum dmub_cmd_secure_display_type { 3879 DMUB_CMD__SECURE_DISPLAY_TEST_CMD = 0, /* test command to only check if inbox message works */ 3880 DMUB_CMD__SECURE_DISPLAY_CRC_STOP_UPDATE, 3881 DMUB_CMD__SECURE_DISPLAY_CRC_WIN_NOTIFY 3882 }; 3883 3884 /** 3885 * Definition of a DMUB_CMD__SECURE_DISPLAY command 3886 */ 3887 struct dmub_rb_cmd_secure_display { 3888 struct dmub_cmd_header header; 3889 /** 3890 * Data passed from driver to dmub firmware. 3891 */ 3892 struct dmub_cmd_roi_info { 3893 uint16_t x_start; 3894 uint16_t x_end; 3895 uint16_t y_start; 3896 uint16_t y_end; 3897 uint8_t otg_id; 3898 uint8_t phy_id; 3899 } roi_info; 3900 }; 3901 3902 /** 3903 * union dmub_rb_cmd - DMUB inbox command. 3904 */ 3905 union dmub_rb_cmd { 3906 /** 3907 * Elements shared with all commands. 3908 */ 3909 struct dmub_rb_cmd_common cmd_common; 3910 /** 3911 * Definition of a DMUB_CMD__REG_SEQ_READ_MODIFY_WRITE command. 3912 */ 3913 struct dmub_rb_cmd_read_modify_write read_modify_write; 3914 /** 3915 * Definition of a DMUB_CMD__REG_SEQ_FIELD_UPDATE_SEQ command. 3916 */ 3917 struct dmub_rb_cmd_reg_field_update_sequence reg_field_update_seq; 3918 /** 3919 * Definition of a DMUB_CMD__REG_SEQ_BURST_WRITE command. 3920 */ 3921 struct dmub_rb_cmd_burst_write burst_write; 3922 /** 3923 * Definition of a DMUB_CMD__REG_REG_WAIT command. 3924 */ 3925 struct dmub_rb_cmd_reg_wait reg_wait; 3926 /** 3927 * Definition of a DMUB_CMD__VBIOS_DIGX_ENCODER_CONTROL command. 3928 */ 3929 struct dmub_rb_cmd_digx_encoder_control digx_encoder_control; 3930 /** 3931 * Definition of a DMUB_CMD__VBIOS_SET_PIXEL_CLOCK command. 3932 */ 3933 struct dmub_rb_cmd_set_pixel_clock set_pixel_clock; 3934 /** 3935 * Definition of a DMUB_CMD__VBIOS_ENABLE_DISP_POWER_GATING command. 3936 */ 3937 struct dmub_rb_cmd_enable_disp_power_gating enable_disp_power_gating; 3938 /** 3939 * Definition of a DMUB_CMD__VBIOS_DPPHY_INIT command. 3940 */ 3941 struct dmub_rb_cmd_dpphy_init dpphy_init; 3942 /** 3943 * Definition of a DMUB_CMD__VBIOS_DIG1_TRANSMITTER_CONTROL command. 3944 */ 3945 struct dmub_rb_cmd_dig1_transmitter_control dig1_transmitter_control; 3946 /** 3947 * Definition of a DMUB_CMD__VBIOS_DOMAIN_CONTROL command. 3948 */ 3949 struct dmub_rb_cmd_domain_control domain_control; 3950 /** 3951 * Definition of a DMUB_CMD__PSR_SET_VERSION command. 3952 */ 3953 struct dmub_rb_cmd_psr_set_version psr_set_version; 3954 /** 3955 * Definition of a DMUB_CMD__PSR_COPY_SETTINGS command. 3956 */ 3957 struct dmub_rb_cmd_psr_copy_settings psr_copy_settings; 3958 /** 3959 * Definition of a DMUB_CMD__PSR_ENABLE command. 3960 */ 3961 struct dmub_rb_cmd_psr_enable psr_enable; 3962 /** 3963 * Definition of a DMUB_CMD__PSR_SET_LEVEL command. 3964 */ 3965 struct dmub_rb_cmd_psr_set_level psr_set_level; 3966 /** 3967 * Definition of a DMUB_CMD__PSR_FORCE_STATIC command. 3968 */ 3969 struct dmub_rb_cmd_psr_force_static psr_force_static; 3970 /** 3971 * Definition of a DMUB_CMD__UPDATE_DIRTY_RECT command. 3972 */ 3973 struct dmub_rb_cmd_update_dirty_rect update_dirty_rect; 3974 /** 3975 * Definition of a DMUB_CMD__UPDATE_CURSOR_INFO command. 3976 */ 3977 struct dmub_rb_cmd_update_cursor_info update_cursor_info; 3978 /** 3979 * Definition of a DMUB_CMD__HW_LOCK command. 3980 * Command is used by driver and FW. 3981 */ 3982 struct dmub_rb_cmd_lock_hw lock_hw; 3983 /** 3984 * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. 3985 */ 3986 struct dmub_rb_cmd_psr_set_vtotal psr_set_vtotal; 3987 /** 3988 * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. 3989 */ 3990 struct dmub_rb_cmd_psr_set_power_opt psr_set_power_opt; 3991 /** 3992 * Definition of a DMUB_CMD__PLAT_54186_WA command. 3993 */ 3994 struct dmub_rb_cmd_PLAT_54186_wa PLAT_54186_wa; 3995 /** 3996 * Definition of a DMUB_CMD__MALL command. 3997 */ 3998 struct dmub_rb_cmd_mall mall; 3999 /** 4000 * Definition of a DMUB_CMD__CAB command. 4001 */ 4002 struct dmub_rb_cmd_cab_for_ss cab; 4003 4004 struct dmub_rb_cmd_fw_assisted_mclk_switch_v2 fw_assisted_mclk_switch_v2; 4005 4006 /** 4007 * Definition of a DMUB_CMD__IDLE_OPT_DCN_RESTORE command. 4008 */ 4009 struct dmub_rb_cmd_idle_opt_dcn_restore dcn_restore; 4010 4011 /** 4012 * Definition of a DMUB_CMD__CLK_MGR_NOTIFY_CLOCKS command. 4013 */ 4014 struct dmub_rb_cmd_clk_mgr_notify_clocks notify_clocks; 4015 4016 /** 4017 * Definition of DMUB_CMD__PANEL_CNTL commands. 4018 */ 4019 struct dmub_rb_cmd_panel_cntl panel_cntl; 4020 /** 4021 * Definition of a DMUB_CMD__ABM_SET_PIPE command. 4022 */ 4023 struct dmub_rb_cmd_abm_set_pipe abm_set_pipe; 4024 4025 /** 4026 * Definition of a DMUB_CMD__ABM_SET_BACKLIGHT command. 4027 */ 4028 struct dmub_rb_cmd_abm_set_backlight abm_set_backlight; 4029 4030 /** 4031 * Definition of a DMUB_CMD__ABM_SET_LEVEL command. 4032 */ 4033 struct dmub_rb_cmd_abm_set_level abm_set_level; 4034 4035 /** 4036 * Definition of a DMUB_CMD__ABM_SET_AMBIENT_LEVEL command. 4037 */ 4038 struct dmub_rb_cmd_abm_set_ambient_level abm_set_ambient_level; 4039 4040 /** 4041 * Definition of a DMUB_CMD__ABM_SET_PWM_FRAC command. 4042 */ 4043 struct dmub_rb_cmd_abm_set_pwm_frac abm_set_pwm_frac; 4044 4045 /** 4046 * Definition of a DMUB_CMD__ABM_INIT_CONFIG command. 4047 */ 4048 struct dmub_rb_cmd_abm_init_config abm_init_config; 4049 4050 /** 4051 * Definition of a DMUB_CMD__ABM_PAUSE command. 4052 */ 4053 struct dmub_rb_cmd_abm_pause abm_pause; 4054 4055 /** 4056 * Definition of a DMUB_CMD__ABM_SAVE_RESTORE command. 4057 */ 4058 struct dmub_rb_cmd_abm_save_restore abm_save_restore; 4059 4060 /** 4061 * Definition of a DMUB_CMD__DP_AUX_ACCESS command. 4062 */ 4063 struct dmub_rb_cmd_dp_aux_access dp_aux_access; 4064 4065 /** 4066 * Definition of a DMUB_CMD__OUTBOX1_ENABLE command. 4067 */ 4068 struct dmub_rb_cmd_outbox1_enable outbox1_enable; 4069 4070 /** 4071 * Definition of a DMUB_CMD__QUERY_FEATURE_CAPS command. 4072 */ 4073 struct dmub_rb_cmd_query_feature_caps query_feature_caps; 4074 4075 /** 4076 * Definition of a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. 4077 */ 4078 struct dmub_rb_cmd_get_visual_confirm_color visual_confirm_color; 4079 struct dmub_rb_cmd_drr_update drr_update; 4080 struct dmub_rb_cmd_fw_assisted_mclk_switch fw_assisted_mclk_switch; 4081 4082 /** 4083 * Definition of a DMUB_CMD__VBIOS_LVTMA_CONTROL command. 4084 */ 4085 struct dmub_rb_cmd_lvtma_control lvtma_control; 4086 /** 4087 * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. 4088 */ 4089 struct dmub_rb_cmd_transmitter_query_dp_alt query_dp_alt; 4090 /** 4091 * Definition of a DMUB_CMD__DPIA_DIG1_CONTROL command. 4092 */ 4093 struct dmub_rb_cmd_dig1_dpia_control dig1_dpia_control; 4094 /** 4095 * Definition of a DMUB_CMD__DPIA_SET_CONFIG_ACCESS command. 4096 */ 4097 struct dmub_rb_cmd_set_config_access set_config_access; 4098 /** 4099 * Definition of a DMUB_CMD__DPIA_MST_ALLOC_SLOTS command. 4100 */ 4101 struct dmub_rb_cmd_set_mst_alloc_slots set_mst_alloc_slots; 4102 /** 4103 * Definition of a DMUB_CMD__EDID_CEA command. 4104 */ 4105 struct dmub_rb_cmd_edid_cea edid_cea; 4106 /** 4107 * Definition of a DMUB_CMD_GET_USBC_CABLE_ID command. 4108 */ 4109 struct dmub_rb_cmd_get_usbc_cable_id cable_id; 4110 4111 /** 4112 * Definition of a DMUB_CMD__QUERY_HPD_STATE command. 4113 */ 4114 struct dmub_rb_cmd_query_hpd_state query_hpd; 4115 /** 4116 * Definition of a DMUB_CMD__SECURE_DISPLAY command. 4117 */ 4118 struct dmub_rb_cmd_secure_display secure_display; 4119 4120 /** 4121 * Definition of a DMUB_CMD__DPIA_HPD_INT_ENABLE command. 4122 */ 4123 struct dmub_rb_cmd_dpia_hpd_int_enable dpia_hpd_int_enable; 4124 /** 4125 * Definition of a DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command. 4126 */ 4127 struct dmub_rb_cmd_idle_opt_dcn_notify_idle idle_opt_notify_idle; 4128 /* 4129 * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. 4130 */ 4131 struct dmub_rb_cmd_replay_copy_settings replay_copy_settings; 4132 /** 4133 * Definition of a DMUB_CMD__REPLAY_ENABLE command. 4134 */ 4135 struct dmub_rb_cmd_replay_enable replay_enable; 4136 /** 4137 * Definition of a DMUB_CMD__SET_REPLAY_POWER_OPT command. 4138 */ 4139 struct dmub_rb_cmd_replay_set_power_opt replay_set_power_opt; 4140 /** 4141 * Definition of a DMUB_CMD__REPLAY_SET_COASTING_VTOTAL command. 4142 */ 4143 struct dmub_rb_cmd_replay_set_coasting_vtotal replay_set_coasting_vtotal; 4144 }; 4145 4146 /** 4147 * union dmub_rb_out_cmd - Outbox command 4148 */ 4149 union dmub_rb_out_cmd { 4150 /** 4151 * Parameters common to every command. 4152 */ 4153 struct dmub_rb_cmd_common cmd_common; 4154 /** 4155 * AUX reply command. 4156 */ 4157 struct dmub_rb_cmd_dp_aux_reply dp_aux_reply; 4158 /** 4159 * HPD notify command. 4160 */ 4161 struct dmub_rb_cmd_dp_hpd_notify dp_hpd_notify; 4162 /** 4163 * SET_CONFIG reply command. 4164 */ 4165 struct dmub_rb_cmd_dp_set_config_reply set_config_reply; 4166 /** 4167 * DPIA notification command. 4168 */ 4169 struct dmub_rb_cmd_dpia_notification dpia_notification; 4170 }; 4171 #pragma pack(pop) 4172 4173 4174 //============================================================================== 4175 //</DMUB_CMD>=================================================================== 4176 //============================================================================== 4177 //< DMUB_RB>==================================================================== 4178 //============================================================================== 4179 4180 #if defined(__cplusplus) 4181 extern "C" { 4182 #endif 4183 4184 /** 4185 * struct dmub_rb_init_params - Initialization params for DMUB ringbuffer 4186 */ 4187 struct dmub_rb_init_params { 4188 void *ctx; /**< Caller provided context pointer */ 4189 void *base_address; /**< CPU base address for ring's data */ 4190 uint32_t capacity; /**< Ringbuffer capacity in bytes */ 4191 uint32_t read_ptr; /**< Initial read pointer for consumer in bytes */ 4192 uint32_t write_ptr; /**< Initial write pointer for producer in bytes */ 4193 }; 4194 4195 /** 4196 * struct dmub_rb - Inbox or outbox DMUB ringbuffer 4197 */ 4198 struct dmub_rb { 4199 void *base_address; /**< CPU address for the ring's data */ 4200 uint32_t rptr; /**< Read pointer for consumer in bytes */ 4201 uint32_t wrpt; /**< Write pointer for producer in bytes */ 4202 uint32_t capacity; /**< Ringbuffer capacity in bytes */ 4203 4204 void *ctx; /**< Caller provided context pointer */ 4205 void *dmub; /**< Pointer to the DMUB interface */ 4206 }; 4207 4208 /** 4209 * @brief Checks if the ringbuffer is empty. 4210 * 4211 * @param rb DMUB Ringbuffer 4212 * @return true if empty 4213 * @return false otherwise 4214 */ 4215 static inline bool dmub_rb_empty(struct dmub_rb *rb) 4216 { 4217 return (rb->wrpt == rb->rptr); 4218 } 4219 4220 /** 4221 * @brief Checks if the ringbuffer is full 4222 * 4223 * @param rb DMUB Ringbuffer 4224 * @return true if full 4225 * @return false otherwise 4226 */ 4227 static inline bool dmub_rb_full(struct dmub_rb *rb) 4228 { 4229 uint32_t data_count; 4230 4231 if (rb->wrpt >= rb->rptr) 4232 data_count = rb->wrpt - rb->rptr; 4233 else 4234 data_count = rb->capacity - (rb->rptr - rb->wrpt); 4235 4236 return (data_count == (rb->capacity - DMUB_RB_CMD_SIZE)); 4237 } 4238 4239 /** 4240 * @brief Pushes a command into the ringbuffer 4241 * 4242 * @param rb DMUB ringbuffer 4243 * @param cmd The command to push 4244 * @return true if the ringbuffer was not full 4245 * @return false otherwise 4246 */ 4247 static inline bool dmub_rb_push_front(struct dmub_rb *rb, 4248 const union dmub_rb_cmd *cmd) 4249 { 4250 uint64_t volatile *dst = (uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->wrpt); 4251 const uint64_t *src = (const uint64_t *)cmd; 4252 uint8_t i; 4253 4254 if (dmub_rb_full(rb)) 4255 return false; 4256 4257 // copying data 4258 for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) 4259 *dst++ = *src++; 4260 4261 rb->wrpt += DMUB_RB_CMD_SIZE; 4262 4263 if (rb->wrpt >= rb->capacity) 4264 rb->wrpt %= rb->capacity; 4265 4266 return true; 4267 } 4268 4269 /** 4270 * @brief Pushes a command into the DMUB outbox ringbuffer 4271 * 4272 * @param rb DMUB outbox ringbuffer 4273 * @param cmd Outbox command 4274 * @return true if not full 4275 * @return false otherwise 4276 */ 4277 static inline bool dmub_rb_out_push_front(struct dmub_rb *rb, 4278 const union dmub_rb_out_cmd *cmd) 4279 { 4280 uint8_t *dst = (uint8_t *)(rb->base_address) + rb->wrpt; 4281 const uint8_t *src = (const uint8_t *)cmd; 4282 4283 if (dmub_rb_full(rb)) 4284 return false; 4285 4286 dmub_memcpy(dst, src, DMUB_RB_CMD_SIZE); 4287 4288 rb->wrpt += DMUB_RB_CMD_SIZE; 4289 4290 if (rb->wrpt >= rb->capacity) 4291 rb->wrpt %= rb->capacity; 4292 4293 return true; 4294 } 4295 4296 /** 4297 * @brief Returns the next unprocessed command in the ringbuffer. 4298 * 4299 * @param rb DMUB ringbuffer 4300 * @param cmd The command to return 4301 * @return true if not empty 4302 * @return false otherwise 4303 */ 4304 static inline bool dmub_rb_front(struct dmub_rb *rb, 4305 union dmub_rb_cmd **cmd) 4306 { 4307 uint8_t *rb_cmd = (uint8_t *)(rb->base_address) + rb->rptr; 4308 4309 if (dmub_rb_empty(rb)) 4310 return false; 4311 4312 *cmd = (union dmub_rb_cmd *)rb_cmd; 4313 4314 return true; 4315 } 4316 4317 /** 4318 * @brief Determines the next ringbuffer offset. 4319 * 4320 * @param rb DMUB inbox ringbuffer 4321 * @param num_cmds Number of commands 4322 * @param next_rptr The next offset in the ringbuffer 4323 */ 4324 static inline void dmub_rb_get_rptr_with_offset(struct dmub_rb *rb, 4325 uint32_t num_cmds, 4326 uint32_t *next_rptr) 4327 { 4328 *next_rptr = rb->rptr + DMUB_RB_CMD_SIZE * num_cmds; 4329 4330 if (*next_rptr >= rb->capacity) 4331 *next_rptr %= rb->capacity; 4332 } 4333 4334 /** 4335 * @brief Returns a pointer to a command in the inbox. 4336 * 4337 * @param rb DMUB inbox ringbuffer 4338 * @param cmd The inbox command to return 4339 * @param rptr The ringbuffer offset 4340 * @return true if not empty 4341 * @return false otherwise 4342 */ 4343 static inline bool dmub_rb_peek_offset(struct dmub_rb *rb, 4344 union dmub_rb_cmd **cmd, 4345 uint32_t rptr) 4346 { 4347 uint8_t *rb_cmd = (uint8_t *)(rb->base_address) + rptr; 4348 4349 if (dmub_rb_empty(rb)) 4350 return false; 4351 4352 *cmd = (union dmub_rb_cmd *)rb_cmd; 4353 4354 return true; 4355 } 4356 4357 /** 4358 * @brief Returns the next unprocessed command in the outbox. 4359 * 4360 * @param rb DMUB outbox ringbuffer 4361 * @param cmd The outbox command to return 4362 * @return true if not empty 4363 * @return false otherwise 4364 */ 4365 static inline bool dmub_rb_out_front(struct dmub_rb *rb, 4366 union dmub_rb_out_cmd *cmd) 4367 { 4368 const uint64_t volatile *src = (const uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->rptr); 4369 uint64_t *dst = (uint64_t *)cmd; 4370 uint8_t i; 4371 4372 if (dmub_rb_empty(rb)) 4373 return false; 4374 4375 // copying data 4376 for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) 4377 *dst++ = *src++; 4378 4379 return true; 4380 } 4381 4382 /** 4383 * @brief Removes the front entry in the ringbuffer. 4384 * 4385 * @param rb DMUB ringbuffer 4386 * @return true if the command was removed 4387 * @return false if there were no commands 4388 */ 4389 static inline bool dmub_rb_pop_front(struct dmub_rb *rb) 4390 { 4391 if (dmub_rb_empty(rb)) 4392 return false; 4393 4394 rb->rptr += DMUB_RB_CMD_SIZE; 4395 4396 if (rb->rptr >= rb->capacity) 4397 rb->rptr %= rb->capacity; 4398 4399 return true; 4400 } 4401 4402 /** 4403 * @brief Flushes commands in the ringbuffer to framebuffer memory. 4404 * 4405 * Avoids a race condition where DMCUB accesses memory while 4406 * there are still writes in flight to framebuffer. 4407 * 4408 * @param rb DMUB ringbuffer 4409 */ 4410 static inline void dmub_rb_flush_pending(const struct dmub_rb *rb) 4411 { 4412 uint32_t rptr = rb->rptr; 4413 uint32_t wptr = rb->wrpt; 4414 4415 while (rptr != wptr) { 4416 uint64_t *data = (uint64_t *)((uint8_t *)(rb->base_address) + rptr); 4417 uint8_t i; 4418 4419 /* Don't remove this. 4420 * The contents need to actually be read from the ring buffer 4421 * for this function to be effective. 4422 */ 4423 for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) 4424 (void)READ_ONCE(*data++); 4425 4426 rptr += DMUB_RB_CMD_SIZE; 4427 if (rptr >= rb->capacity) 4428 rptr %= rb->capacity; 4429 } 4430 } 4431 4432 /** 4433 * @brief Initializes a DMCUB ringbuffer 4434 * 4435 * @param rb DMUB ringbuffer 4436 * @param init_params initial configuration for the ringbuffer 4437 */ 4438 static inline void dmub_rb_init(struct dmub_rb *rb, 4439 struct dmub_rb_init_params *init_params) 4440 { 4441 rb->base_address = init_params->base_address; 4442 rb->capacity = init_params->capacity; 4443 rb->rptr = init_params->read_ptr; 4444 rb->wrpt = init_params->write_ptr; 4445 } 4446 4447 /** 4448 * @brief Copies output data from in/out commands into the given command. 4449 * 4450 * @param rb DMUB ringbuffer 4451 * @param cmd Command to copy data into 4452 */ 4453 static inline void dmub_rb_get_return_data(struct dmub_rb *rb, 4454 union dmub_rb_cmd *cmd) 4455 { 4456 // Copy rb entry back into command 4457 uint8_t *rd_ptr = (rb->rptr == 0) ? 4458 (uint8_t *)rb->base_address + rb->capacity - DMUB_RB_CMD_SIZE : 4459 (uint8_t *)rb->base_address + rb->rptr - DMUB_RB_CMD_SIZE; 4460 4461 dmub_memcpy(cmd, rd_ptr, DMUB_RB_CMD_SIZE); 4462 } 4463 4464 #if defined(__cplusplus) 4465 } 4466 #endif 4467 4468 //============================================================================== 4469 //</DMUB_RB>==================================================================== 4470 //============================================================================== 4471 4472 #endif /* _DMUB_CMD_H_ */ 4473