1 /*
2  * Copyright 2022 Advanced Micro Devices, Inc.
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice shall be included in
12  * all copies or substantial portions of the Software.
13  *
14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
17  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20  * OTHER DEALINGS IN THE SOFTWARE.
21  *
22  * Authors: AMD
23  *
24  */
25 
26 #include "dce110/dce110_hw_sequencer.h"
27 #include "dcn10/dcn10_hw_sequencer.h"
28 #include "dcn20/dcn20_hwseq.h"
29 #include "dcn21/dcn21_hwseq.h"
30 #include "dcn30/dcn30_hwseq.h"
31 #include "dcn31/dcn31_hwseq.h"
32 #include "dcn32_hwseq.h"
33 #include "dcn32_init.h"
34 
35 static const struct hw_sequencer_funcs dcn32_funcs = {
36 	.program_gamut_remap = dcn10_program_gamut_remap,
37 	.init_hw = dcn32_init_hw,
38 	.apply_ctx_to_hw = dce110_apply_ctx_to_hw,
39 	.apply_ctx_for_surface = NULL,
40 	.program_front_end_for_ctx = dcn20_program_front_end_for_ctx,
41 	.wait_for_pending_cleared = dcn10_wait_for_pending_cleared,
42 	.post_unlock_program_front_end = dcn20_post_unlock_program_front_end,
43 	.update_plane_addr = dcn20_update_plane_addr,
44 	.update_dchub = dcn10_update_dchub,
45 	.update_pending_status = dcn10_update_pending_status,
46 	.program_output_csc = dcn20_program_output_csc,
47 	.enable_accelerated_mode = dce110_enable_accelerated_mode,
48 	.enable_timing_synchronization = dcn10_enable_timing_synchronization,
49 	.enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
50 	.update_info_frame = dcn31_update_info_frame,
51 	.send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
52 	.enable_stream = dcn20_enable_stream,
53 	.disable_stream = dce110_disable_stream,
54 	.unblank_stream = dcn32_unblank_stream,
55 	.blank_stream = dce110_blank_stream,
56 	.enable_audio_stream = dce110_enable_audio_stream,
57 	.disable_audio_stream = dce110_disable_audio_stream,
58 	.disable_plane = dcn20_disable_plane,
59 	.pipe_control_lock = dcn20_pipe_control_lock,
60 	.interdependent_update_lock = dcn10_lock_all_pipes,
61 	.cursor_lock = dcn10_cursor_lock,
62 	.prepare_bandwidth = dcn30_prepare_bandwidth,
63 	.optimize_bandwidth = dcn20_optimize_bandwidth,
64 	.update_bandwidth = dcn20_update_bandwidth,
65 	.set_drr = dcn10_set_drr,
66 	.get_position = dcn10_get_position,
67 	.set_static_screen_control = dcn10_set_static_screen_control,
68 	.setup_stereo = dcn10_setup_stereo,
69 	.set_avmute = dcn30_set_avmute,
70 	.log_hw_state = dcn10_log_hw_state,
71 	.get_hw_state = dcn10_get_hw_state,
72 	.clear_status_bits = dcn10_clear_status_bits,
73 	.wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
74 	.edp_backlight_control = dce110_edp_backlight_control,
75 	.edp_power_control = dce110_edp_power_control,
76 	.edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
77 	.edp_wait_for_T12 = dce110_edp_wait_for_T12,
78 	.set_cursor_position = dcn10_set_cursor_position,
79 	.set_cursor_attribute = dcn10_set_cursor_attribute,
80 	.set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
81 	.setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
82 	.set_clock = dcn10_set_clock,
83 	.get_clock = dcn10_get_clock,
84 	.program_triplebuffer = dcn20_program_triple_buffer,
85 	.enable_writeback = dcn30_enable_writeback,
86 	.disable_writeback = dcn30_disable_writeback,
87 	.update_writeback = dcn30_update_writeback,
88 	.mmhubbub_warmup = dcn30_mmhubbub_warmup,
89 	.dmdata_status_done = dcn20_dmdata_status_done,
90 	.program_dmdata_engine = dcn30_program_dmdata_engine,
91 	.set_dmdata_attributes = dcn20_set_dmdata_attributes,
92 	.init_sys_ctx = dcn20_init_sys_ctx,
93 	.init_vm_ctx = dcn20_init_vm_ctx,
94 	.set_flip_control_gsl = dcn20_set_flip_control_gsl,
95 	.get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
96 	.calc_vupdate_position = dcn10_calc_vupdate_position,
97 	.apply_idle_power_optimizations = dcn32_apply_idle_power_optimizations,
98 	.does_plane_fit_in_mall = NULL,
99 	.set_backlight_level = dcn21_set_backlight_level,
100 	.set_abm_immediate_disable = dcn21_set_abm_immediate_disable,
101 	.hardware_release = dcn30_hardware_release,
102 	.set_pipe = dcn21_set_pipe,
103 	.enable_lvds_link_output = dce110_enable_lvds_link_output,
104 	.enable_tmds_link_output = dce110_enable_tmds_link_output,
105 	.enable_dp_link_output = dce110_enable_dp_link_output,
106 	.disable_link_output = dcn32_disable_link_output,
107 	.set_disp_pattern_generator = dcn30_set_disp_pattern_generator,
108 	.get_dcc_en_bits = dcn10_get_dcc_en_bits,
109 	.commit_subvp_config = dcn32_commit_subvp_config,
110 	.enable_phantom_streams = dcn32_enable_phantom_streams,
111 	.subvp_pipe_control_lock = dcn32_subvp_pipe_control_lock,
112 	.update_visual_confirm_color = dcn20_update_visual_confirm_color,
113 	.update_phantom_vp_position = dcn32_update_phantom_vp_position,
114 	.update_dsc_pg = dcn32_update_dsc_pg,
115 	.apply_update_flags_for_phantom = dcn32_apply_update_flags_for_phantom,
116 };
117 
118 static const struct hwseq_private_funcs dcn32_private_funcs = {
119 	.init_pipes = dcn10_init_pipes,
120 	.update_plane_addr = dcn20_update_plane_addr,
121 	.plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
122 	.update_mpcc = dcn20_update_mpcc,
123 	.set_input_transfer_func = dcn32_set_input_transfer_func,
124 	.set_output_transfer_func = dcn32_set_output_transfer_func,
125 	.power_down = dce110_power_down,
126 	.enable_display_power_gating = dcn10_dummy_display_power_gating,
127 	.blank_pixel_data = dcn20_blank_pixel_data,
128 	.reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap,
129 	.enable_stream_timing = dcn20_enable_stream_timing,
130 	.edp_backlight_control = dce110_edp_backlight_control,
131 	.disable_stream_gating = dcn20_disable_stream_gating,
132 	.enable_stream_gating = dcn20_enable_stream_gating,
133 	.setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt,
134 	.did_underflow_occur = dcn10_did_underflow_occur,
135 	.init_blank = dcn20_init_blank,
136 	.disable_vga = dcn20_disable_vga,
137 	.bios_golden_init = dcn10_bios_golden_init,
138 	.plane_atomic_disable = dcn20_plane_atomic_disable,
139 	.plane_atomic_power_down = dcn10_plane_atomic_power_down,
140 	.enable_power_gating_plane = dcn32_enable_power_gating_plane,
141 	.hubp_pg_control = dcn32_hubp_pg_control,
142 	.program_all_writeback_pipes_in_tree = dcn30_program_all_writeback_pipes_in_tree,
143 	.update_odm = dcn32_update_odm,
144 	.dsc_pg_control = dcn32_dsc_pg_control,
145 	.dsc_pg_status = dcn32_dsc_pg_status,
146 	.set_hdr_multiplier = dcn10_set_hdr_multiplier,
147 	.verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
148 	.wait_for_blank_complete = dcn20_wait_for_blank_complete,
149 	.dccg_init = dcn20_dccg_init,
150 	.set_mcm_luts = dcn32_set_mcm_luts,
151 	.program_mall_pipe_config = dcn32_program_mall_pipe_config,
152 	.subvp_update_force_pstate = dcn32_subvp_update_force_pstate,
153 	.update_mall_sel = dcn32_update_mall_sel,
154 	.calculate_dccg_k1_k2_values = dcn32_calculate_dccg_k1_k2_values,
155 	.set_pixels_per_cycle = dcn32_set_pixels_per_cycle,
156 	.is_dp_dig_pixel_rate_div_policy = dcn32_is_dp_dig_pixel_rate_div_policy,
157 };
158 
159 void dcn32_hw_sequencer_init_functions(struct dc *dc)
160 {
161 	dc->hwss = dcn32_funcs;
162 	dc->hwseq->funcs = dcn32_private_funcs;
163 
164 	if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
165 		dc->hwss.init_hw = dcn20_fpga_init_hw;
166 		dc->hwseq->funcs.init_pipes = NULL;
167 	}
168 }
169