1 /*
2  * Copyright 2021 Advanced Micro Devices, Inc.
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  *  and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice shall be included in
12  * all copies or substantial portions of the Software.
13  *
14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
17  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20  * OTHER DEALINGS IN THE SOFTWARE.
21  *
22  * Authors: AMD
23  *
24  */
25 
26 
27 #include "dc_bios_types.h"
28 #include "dcn30/dcn30_dio_stream_encoder.h"
29 #include "dcn32_dio_stream_encoder.h"
30 #include "reg_helper.h"
31 #include "hw_shared.h"
32 #include "inc/link_dpcd.h"
33 #include "dpcd_defs.h"
34 
35 #define DC_LOGGER \
36 		enc1->base.ctx->logger
37 
38 #define REG(reg)\
39 	(enc1->regs->reg)
40 
41 #undef FN
42 #define FN(reg_name, field_name) \
43 	enc1->se_shift->field_name, enc1->se_mask->field_name
44 
45 #define VBI_LINE_0 0
46 #define HDMI_CLOCK_CHANNEL_RATE_MORE_340M 340000
47 
48 #define CTX \
49 	enc1->base.ctx
50 
51 
52 
53 static void enc32_dp_set_odm_combine(
54 	struct stream_encoder *enc,
55 	bool odm_combine)
56 {
57 	struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
58 
59 	REG_UPDATE(DP_PIXEL_FORMAT, DP_PIXEL_PER_CYCLE_PROCESSING_MODE, odm_combine ? 1 : 0);
60 }
61 
62 /* setup stream encoder in dvi mode */
63 static void enc32_stream_encoder_dvi_set_stream_attribute(
64 	struct stream_encoder *enc,
65 	struct dc_crtc_timing *crtc_timing,
66 	bool is_dual_link)
67 {
68 	struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
69 
70 	if (!enc->ctx->dc->debug.avoid_vbios_exec_table) {
71 		struct bp_encoder_control cntl = {0};
72 
73 		cntl.action = ENCODER_CONTROL_SETUP;
74 		cntl.engine_id = enc1->base.id;
75 		cntl.signal = is_dual_link ?
76 			SIGNAL_TYPE_DVI_DUAL_LINK : SIGNAL_TYPE_DVI_SINGLE_LINK;
77 		cntl.enable_dp_audio = false;
78 		cntl.pixel_clock = crtc_timing->pix_clk_100hz / 10;
79 		cntl.lanes_number = (is_dual_link) ? LANE_COUNT_EIGHT : LANE_COUNT_FOUR;
80 
81 		if (enc1->base.bp->funcs->encoder_control(
82 				enc1->base.bp, &cntl) != BP_RESULT_OK)
83 			return;
84 
85 	} else {
86 
87 		//Set pattern for clock channel, default vlue 0x63 does not work
88 		REG_UPDATE(DIG_CLOCK_PATTERN, DIG_CLOCK_PATTERN, 0x1F);
89 
90 		//DIG_BE_TMDS_DVI_MODE : TMDS-DVI mode is already set in link_encoder_setup
91 
92 		//DIG_SOURCE_SELECT is already set in dig_connect_to_otg
93 
94 		/* DIG_START is removed from the register spec */
95 	}
96 
97 	ASSERT(crtc_timing->pixel_encoding == PIXEL_ENCODING_RGB);
98 	ASSERT(crtc_timing->display_color_depth == COLOR_DEPTH_888);
99 	enc1_stream_encoder_set_stream_attribute_helper(enc1, crtc_timing);
100 }
101 
102 /* setup stream encoder in hdmi mode */
103 static void enc32_stream_encoder_hdmi_set_stream_attribute(
104 	struct stream_encoder *enc,
105 	struct dc_crtc_timing *crtc_timing,
106 	int actual_pix_clk_khz,
107 	bool enable_audio)
108 {
109 	struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
110 
111 	if (!enc->ctx->dc->debug.avoid_vbios_exec_table) {
112 		struct bp_encoder_control cntl = {0};
113 
114 		cntl.action = ENCODER_CONTROL_SETUP;
115 		cntl.engine_id = enc1->base.id;
116 		cntl.signal = SIGNAL_TYPE_HDMI_TYPE_A;
117 		cntl.enable_dp_audio = enable_audio;
118 		cntl.pixel_clock = actual_pix_clk_khz;
119 		cntl.lanes_number = LANE_COUNT_FOUR;
120 
121 		if (enc1->base.bp->funcs->encoder_control(
122 				enc1->base.bp, &cntl) != BP_RESULT_OK)
123 			return;
124 
125 	} else {
126 
127 		//Set pattern for clock channel, default vlue 0x63 does not work
128 		REG_UPDATE(DIG_CLOCK_PATTERN, DIG_CLOCK_PATTERN, 0x1F);
129 
130 		//DIG_BE_TMDS_HDMI_MODE : TMDS-HDMI mode is already set in link_encoder_setup
131 
132 		//DIG_SOURCE_SELECT is already set in dig_connect_to_otg
133 
134 		/* DIG_START is removed from the register spec */
135 	}
136 
137 	/* Configure pixel encoding */
138 	enc1_stream_encoder_set_stream_attribute_helper(enc1, crtc_timing);
139 
140 	/* setup HDMI engine */
141 	REG_UPDATE_6(HDMI_CONTROL,
142 		HDMI_PACKET_GEN_VERSION, 1,
143 		HDMI_KEEPOUT_MODE, 1,
144 		HDMI_DEEP_COLOR_ENABLE, 0,
145 		HDMI_DATA_SCRAMBLE_EN, 0,
146 		HDMI_NO_EXTRA_NULL_PACKET_FILLED, 1,
147 		HDMI_CLOCK_CHANNEL_RATE, 0);
148 
149 	/* Configure color depth */
150 	switch (crtc_timing->display_color_depth) {
151 	case COLOR_DEPTH_888:
152 		REG_UPDATE(HDMI_CONTROL, HDMI_DEEP_COLOR_DEPTH, 0);
153 		break;
154 	case COLOR_DEPTH_101010:
155 		if (crtc_timing->pixel_encoding == PIXEL_ENCODING_YCBCR422) {
156 			REG_UPDATE_2(HDMI_CONTROL,
157 					HDMI_DEEP_COLOR_DEPTH, 1,
158 					HDMI_DEEP_COLOR_ENABLE, 0);
159 		} else {
160 			REG_UPDATE_2(HDMI_CONTROL,
161 					HDMI_DEEP_COLOR_DEPTH, 1,
162 					HDMI_DEEP_COLOR_ENABLE, 1);
163 			}
164 		break;
165 	case COLOR_DEPTH_121212:
166 		if (crtc_timing->pixel_encoding == PIXEL_ENCODING_YCBCR422) {
167 			REG_UPDATE_2(HDMI_CONTROL,
168 					HDMI_DEEP_COLOR_DEPTH, 2,
169 					HDMI_DEEP_COLOR_ENABLE, 0);
170 		} else {
171 			REG_UPDATE_2(HDMI_CONTROL,
172 					HDMI_DEEP_COLOR_DEPTH, 2,
173 					HDMI_DEEP_COLOR_ENABLE, 1);
174 			}
175 		break;
176 	case COLOR_DEPTH_161616:
177 		REG_UPDATE_2(HDMI_CONTROL,
178 				HDMI_DEEP_COLOR_DEPTH, 3,
179 				HDMI_DEEP_COLOR_ENABLE, 1);
180 		break;
181 	default:
182 		break;
183 	}
184 
185 	if (actual_pix_clk_khz >= HDMI_CLOCK_CHANNEL_RATE_MORE_340M) {
186 		/* enable HDMI data scrambler
187 		 * HDMI_CLOCK_CHANNEL_RATE_MORE_340M
188 		 * Clock channel frequency is 1/4 of character rate.
189 		 */
190 		REG_UPDATE_2(HDMI_CONTROL,
191 			HDMI_DATA_SCRAMBLE_EN, 1,
192 			HDMI_CLOCK_CHANNEL_RATE, 1);
193 	} else if (crtc_timing->flags.LTE_340MCSC_SCRAMBLE) {
194 
195 		/* TODO: New feature for DCE11, still need to implement */
196 
197 		/* enable HDMI data scrambler
198 		 * HDMI_CLOCK_CHANNEL_FREQ_EQUAL_TO_CHAR_RATE
199 		 * Clock channel frequency is the same
200 		 * as character rate
201 		 */
202 		REG_UPDATE_2(HDMI_CONTROL,
203 			HDMI_DATA_SCRAMBLE_EN, 1,
204 			HDMI_CLOCK_CHANNEL_RATE, 0);
205 	}
206 
207 
208 	/* Enable transmission of General Control packet on every frame */
209 	REG_UPDATE_3(HDMI_VBI_PACKET_CONTROL,
210 		HDMI_GC_CONT, 1,
211 		HDMI_GC_SEND, 1,
212 		HDMI_NULL_SEND, 1);
213 
214 #if defined(CONFIG_DRM_AMD_DC_HDCP)
215 	/* Disable Audio Content Protection packet transmission */
216 	REG_UPDATE(HDMI_VBI_PACKET_CONTROL, HDMI_ACP_SEND, 0);
217 #endif
218 
219 	/* following belongs to audio */
220 	/* Enable Audio InfoFrame packet transmission. */
221 	REG_UPDATE(HDMI_INFOFRAME_CONTROL0, HDMI_AUDIO_INFO_SEND, 1);
222 
223 	/* update double-buffered AUDIO_INFO registers immediately */
224 	ASSERT(enc->afmt);
225 	enc->afmt->funcs->audio_info_immediate_update(enc->afmt);
226 
227 	/* Select line number on which to send Audio InfoFrame packets */
228 	REG_UPDATE(HDMI_INFOFRAME_CONTROL1, HDMI_AUDIO_INFO_LINE,
229 				VBI_LINE_0 + 2);
230 
231 	/* set HDMI GC AVMUTE */
232 	REG_UPDATE(HDMI_GC, HDMI_GC_AVMUTE, 0);
233 }
234 
235 
236 
237 static bool is_two_pixels_per_containter(const struct dc_crtc_timing *timing)
238 {
239 	bool two_pix = timing->pixel_encoding == PIXEL_ENCODING_YCBCR420;
240 
241 	two_pix = two_pix || (timing->flags.DSC && timing->pixel_encoding == PIXEL_ENCODING_YCBCR422
242 			&& !timing->dsc_cfg.ycbcr422_simple);
243 	return two_pix;
244 }
245 
246 static bool is_h_timing_divisible_by_2(const struct dc_crtc_timing *timing)
247 {
248 	/* math borrowed from function of same name in inc/resource
249 	 * checks if h_timing is divisible by 2
250 	 */
251 
252 	bool divisible = false;
253 	uint16_t h_blank_start = 0;
254 	uint16_t h_blank_end = 0;
255 
256 	if (timing) {
257 		h_blank_start = timing->h_total - timing->h_front_porch;
258 		h_blank_end = h_blank_start - timing->h_addressable;
259 
260 		/* HTOTAL, Hblank start/end, and Hsync start/end all must be
261 		 * divisible by 2 in order for the horizontal timing params
262 		 * to be considered divisible by 2. Hsync start is always 0.
263 		 */
264 		divisible = (timing->h_total % 2 == 0) &&
265 				(h_blank_start % 2 == 0) &&
266 				(h_blank_end % 2 == 0) &&
267 				(timing->h_sync_width % 2 == 0);
268 	}
269 	return divisible;
270 }
271 
272 static bool is_dp_dig_pixel_rate_div_policy(struct dc *dc, const struct dc_crtc_timing *timing)
273 {
274 	/* should be functionally the same as dcn32_is_dp_dig_pixel_rate_div_policy for DP encoders*/
275 	return is_h_timing_divisible_by_2(timing) &&
276 		dc->debug.enable_dp_dig_pixel_rate_div_policy;
277 }
278 
279 static void enc32_stream_encoder_dp_unblank(
280         struct dc_link *link,
281 		struct stream_encoder *enc,
282 		const struct encoder_unblank_param *param)
283 {
284 	struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
285 	struct dc *dc = enc->ctx->dc;
286 
287 	if (param->link_settings.link_rate != LINK_RATE_UNKNOWN) {
288 		uint32_t n_vid = 0x8000;
289 		uint32_t m_vid;
290 		uint32_t n_multiply = 0;
291 		uint64_t m_vid_l = n_vid;
292 
293 		/* YCbCr 4:2:0 : Computed VID_M will be 2X the input rate */
294 		if (is_two_pixels_per_containter(&param->timing) || param->opp_cnt > 1
295 			|| is_dp_dig_pixel_rate_div_policy(dc, &param->timing)) {
296 			/*this logic should be the same in get_pixel_clock_parameters() */
297 			n_multiply = 1;
298 		}
299 		/* M / N = Fstream / Flink
300 		 * m_vid / n_vid = pixel rate / link rate
301 		 */
302 
303 		m_vid_l *= param->timing.pix_clk_100hz / 10;
304 		m_vid_l = div_u64(m_vid_l,
305 			param->link_settings.link_rate
306 				* LINK_RATE_REF_FREQ_IN_KHZ);
307 
308 		m_vid = (uint32_t) m_vid_l;
309 
310 		/* enable auto measurement */
311 
312 		REG_UPDATE(DP_VID_TIMING, DP_VID_M_N_GEN_EN, 0);
313 
314 		/* auto measurement need 1 full 0x8000 symbol cycle to kick in,
315 		 * therefore program initial value for Mvid and Nvid
316 		 */
317 
318 		REG_UPDATE(DP_VID_N, DP_VID_N, n_vid);
319 
320 		REG_UPDATE(DP_VID_M, DP_VID_M, m_vid);
321 
322 		REG_UPDATE_2(DP_VID_TIMING,
323 				DP_VID_M_N_GEN_EN, 1,
324 				DP_VID_N_MUL, n_multiply);
325 	}
326 
327 	/* make sure stream is disabled before resetting steer fifo */
328 	REG_UPDATE(DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, false);
329 	REG_WAIT(DP_VID_STREAM_CNTL, DP_VID_STREAM_STATUS, 0, 10, 5000);
330 
331 	/* DIG_START is removed from the register spec */
332 
333 	/* switch DP encoder to CRTC data, but reset it the fifo first. It may happen
334 	 * that it overflows during mode transition, and sometimes doesn't recover.
335 	 */
336 	REG_UPDATE(DP_STEER_FIFO, DP_STEER_FIFO_RESET, 1);
337 	udelay(10);
338 
339 	REG_UPDATE(DP_STEER_FIFO, DP_STEER_FIFO_RESET, 0);
340 
341 	/* DIG Resync FIFO now needs to be explicitly enabled
342 	 */
343 	// TODO: Confirm if we need to wait for DIG_SYMCLK_FE_ON
344 	REG_WAIT(DIG_FE_CNTL, DIG_SYMCLK_FE_ON, 1, 10, 5000);
345 
346 	/* read start level = 0 will bring underflow / overflow and DIG_FIFO_ERROR = 1
347 	 * so set it to 1/2 full = 7 before reset as suggested by hardware team.
348 	 */
349 	REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_READ_START_LEVEL, 0x7);
350 
351 	REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_RESET, 1);
352 
353 	REG_WAIT(DIG_FIFO_CTRL0, DIG_FIFO_RESET_DONE, 1, 10, 5000);
354 
355 	REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_RESET, 0);
356 
357 	REG_WAIT(DIG_FIFO_CTRL0, DIG_FIFO_RESET_DONE, 0, 10, 5000);
358 
359 	REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_ENABLE, 1);
360 
361 	/* wait 100us for DIG/DP logic to prime
362 	 * (i.e. a few video lines)
363 	 */
364 	udelay(100);
365 
366 	/* the hardware would start sending video at the start of the next DP
367 	 * frame (i.e. rising edge of the vblank).
368 	 * NOTE: We used to program DP_VID_STREAM_DIS_DEFER = 2 here, but this
369 	 * register has no effect on enable transition! HW always guarantees
370 	 * VID_STREAM enable at start of next frame, and this is not
371 	 * programmable
372 	 */
373 
374 	REG_UPDATE(DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, true);
375 
376 	dp_source_sequence_trace(link, DPCD_SOURCE_SEQ_AFTER_ENABLE_DP_VID_STREAM);
377 }
378 
379 /* Set DSC-related configuration.
380  *   dsc_mode: 0 disables DSC, other values enable DSC in specified format
381  *   sc_bytes_per_pixel: DP_DSC_BYTES_PER_PIXEL removed in DCN32
382  *   dsc_slice_width: DP_DSC_SLICE_WIDTH removed in DCN32
383  */
384 static void enc32_dp_set_dsc_config(struct stream_encoder *enc,
385 					enum optc_dsc_mode dsc_mode,
386 					uint32_t dsc_bytes_per_pixel,
387 					uint32_t dsc_slice_width)
388 {
389 	struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
390 
391 	REG_UPDATE(DP_DSC_CNTL,	DP_DSC_MODE, dsc_mode == OPTC_DSC_DISABLED ? 0 : 1);
392 }
393 
394 /* this function read dsc related register fields to be logged later in dcn10_log_hw_state
395  * into a dcn_dsc_state struct.
396  */
397 static void enc32_read_state(struct stream_encoder *enc, struct enc_state *s)
398 {
399 	struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
400 
401 	//if dsc is enabled, continue to read
402 	REG_GET(DP_DSC_CNTL, DP_DSC_MODE, &s->dsc_mode);
403 	if (s->dsc_mode) {
404 		REG_GET(DP_GSP11_CNTL, DP_SEC_GSP11_LINE_NUM, &s->sec_gsp_pps_line_num);
405 
406 		REG_GET(DP_MSA_VBID_MISC, DP_VBID6_LINE_REFERENCE, &s->vbid6_line_reference);
407 		REG_GET(DP_MSA_VBID_MISC, DP_VBID6_LINE_NUM, &s->vbid6_line_num);
408 
409 		REG_GET(DP_GSP11_CNTL, DP_SEC_GSP11_ENABLE, &s->sec_gsp_pps_enable);
410 		REG_GET(DP_SEC_CNTL, DP_SEC_STREAM_ENABLE, &s->sec_stream_enable);
411 	}
412 }
413 
414 static void enc32_set_dig_input_mode(struct stream_encoder *enc, unsigned int pix_per_container)
415 {
416 	struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
417 
418 	/* The naming of this field is confusing, what it means is the output mode of otg, which
419 	 * is the input mode of the dig
420 	 */
421 	REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_OUTPUT_PIXEL_MODE, pix_per_container == 2 ? 0x1 : 0x0);
422 }
423 
424 static const struct stream_encoder_funcs dcn32_str_enc_funcs = {
425 	.dp_set_odm_combine =
426 		enc32_dp_set_odm_combine,
427 	.dp_set_stream_attribute =
428 		enc2_stream_encoder_dp_set_stream_attribute,
429 	.hdmi_set_stream_attribute =
430 		enc32_stream_encoder_hdmi_set_stream_attribute,
431 	.dvi_set_stream_attribute =
432 		enc32_stream_encoder_dvi_set_stream_attribute,
433 	.set_throttled_vcp_size =
434 		enc1_stream_encoder_set_throttled_vcp_size,
435 	.update_hdmi_info_packets =
436 		enc3_stream_encoder_update_hdmi_info_packets,
437 	.stop_hdmi_info_packets =
438 		enc3_stream_encoder_stop_hdmi_info_packets,
439 	.update_dp_info_packets =
440 		enc3_stream_encoder_update_dp_info_packets,
441 	.stop_dp_info_packets =
442 		enc1_stream_encoder_stop_dp_info_packets,
443 	.dp_blank =
444 		enc1_stream_encoder_dp_blank,
445 	.dp_unblank =
446 		enc32_stream_encoder_dp_unblank,
447 	.audio_mute_control = enc3_audio_mute_control,
448 
449 	.dp_audio_setup = enc3_se_dp_audio_setup,
450 	.dp_audio_enable = enc3_se_dp_audio_enable,
451 	.dp_audio_disable = enc1_se_dp_audio_disable,
452 
453 	.hdmi_audio_setup = enc3_se_hdmi_audio_setup,
454 	.hdmi_audio_disable = enc1_se_hdmi_audio_disable,
455 	.setup_stereo_sync  = enc1_setup_stereo_sync,
456 	.set_avmute = enc1_stream_encoder_set_avmute,
457 	.dig_connect_to_otg = enc1_dig_connect_to_otg,
458 	.dig_source_otg = enc1_dig_source_otg,
459 
460 	.dp_get_pixel_format  = enc1_stream_encoder_dp_get_pixel_format,
461 
462 	.enc_read_state = enc32_read_state,
463 	.dp_set_dsc_config = enc32_dp_set_dsc_config,
464 	.dp_set_dsc_pps_info_packet = enc3_dp_set_dsc_pps_info_packet,
465 	.set_dynamic_metadata = enc2_set_dynamic_metadata,
466 	.hdmi_reset_stream_attribute = enc1_reset_hdmi_stream_attribute,
467 
468 	.set_input_mode = enc32_set_dig_input_mode,
469 };
470 
471 void dcn32_dio_stream_encoder_construct(
472 	struct dcn10_stream_encoder *enc1,
473 	struct dc_context *ctx,
474 	struct dc_bios *bp,
475 	enum engine_id eng_id,
476 	struct vpg *vpg,
477 	struct afmt *afmt,
478 	const struct dcn10_stream_enc_registers *regs,
479 	const struct dcn10_stream_encoder_shift *se_shift,
480 	const struct dcn10_stream_encoder_mask *se_mask)
481 {
482 	enc1->base.funcs = &dcn32_str_enc_funcs;
483 	enc1->base.ctx = ctx;
484 	enc1->base.id = eng_id;
485 	enc1->base.bp = bp;
486 	enc1->base.vpg = vpg;
487 	enc1->base.afmt = afmt;
488 	enc1->regs = regs;
489 	enc1->se_shift = se_shift;
490 	enc1->se_mask = se_mask;
491 	enc1->base.stream_enc_inst = vpg->inst;
492 }
493 
494