1 /* 2 * Copyright 2019 Advanced Micro Devices, Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 20 * OTHER DEALINGS IN THE SOFTWARE. 21 * 22 */ 23 24 #include "smuio/smuio_11_0_0_offset.h" 25 #include "smuio/smuio_11_0_0_sh_mask.h" 26 27 #include "smu_v11_0_i2c.h" 28 #include "amdgpu.h" 29 #include "soc15_common.h" 30 #include <drm/drm_fixed.h> 31 #include <drm/drm_drv.h> 32 #include "amdgpu_amdkfd.h" 33 #include <linux/i2c.h> 34 #include <linux/pci.h> 35 #include "amdgpu_ras.h" 36 37 /* error codes */ 38 #define I2C_OK 0 39 #define I2C_NAK_7B_ADDR_NOACK 1 40 #define I2C_NAK_TXDATA_NOACK 2 41 #define I2C_TIMEOUT 4 42 #define I2C_SW_TIMEOUT 8 43 #define I2C_ABORT 0x10 44 45 /* I2C transaction flags */ 46 #define I2C_NO_STOP 1 47 #define I2C_RESTART 2 48 49 #define to_amdgpu_device(x) (container_of(x, struct amdgpu_ras, eeprom_control.eeprom_accessor))->adev 50 #define to_eeprom_control(x) container_of(x, struct amdgpu_ras_eeprom_control, eeprom_accessor) 51 52 static void smu_v11_0_i2c_set_clock_gating(struct i2c_adapter *control, bool en) 53 { 54 struct amdgpu_device *adev = to_amdgpu_device(control); 55 uint32_t reg = RREG32_SOC15(SMUIO, 0, mmSMUIO_PWRMGT); 56 57 reg = REG_SET_FIELD(reg, SMUIO_PWRMGT, i2c_clk_gate_en, en ? 1 : 0); 58 WREG32_SOC15(SMUIO, 0, mmSMUIO_PWRMGT, reg); 59 } 60 61 62 static void smu_v11_0_i2c_enable(struct i2c_adapter *control, bool enable) 63 { 64 struct amdgpu_device *adev = to_amdgpu_device(control); 65 66 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE, enable ? 1 : 0); 67 } 68 69 static void smu_v11_0_i2c_clear_status(struct i2c_adapter *control) 70 { 71 struct amdgpu_device *adev = to_amdgpu_device(control); 72 /* do */ 73 { 74 RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_CLR_INTR); 75 76 } /* while (reg_CKSVII2C_ic_clr_intr == 0) */ 77 } 78 79 static void smu_v11_0_i2c_configure(struct i2c_adapter *control) 80 { 81 struct amdgpu_device *adev = to_amdgpu_device(control); 82 uint32_t reg = 0; 83 84 reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_SLAVE_DISABLE, 1); 85 reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_RESTART_EN, 1); 86 reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_10BITADDR_MASTER, 0); 87 reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_10BITADDR_SLAVE, 0); 88 /* Standard mode */ 89 reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_MAX_SPEED_MODE, 2); 90 reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_MASTER_MODE, 1); 91 92 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_CON, reg); 93 } 94 95 static void smu_v11_0_i2c_set_clock(struct i2c_adapter *control) 96 { 97 struct amdgpu_device *adev = to_amdgpu_device(control); 98 99 /* 100 * Standard mode speed, These values are taken from SMUIO MAS, 101 * but are different from what is given is 102 * Synopsys spec. The values here are based on assumption 103 * that refclock is 100MHz 104 * 105 * Configuration for standard mode; Speed = 100kbps 106 * Scale linearly, for now only support standard speed clock 107 * This will work only with 100M ref clock 108 * 109 * TBD:Change the calculation to take into account ref clock values also. 110 */ 111 112 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_FS_SPKLEN, 2); 113 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_SS_SCL_HCNT, 120); 114 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_SS_SCL_LCNT, 130); 115 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_SDA_HOLD, 20); 116 } 117 118 static void smu_v11_0_i2c_set_address(struct i2c_adapter *control, uint8_t address) 119 { 120 struct amdgpu_device *adev = to_amdgpu_device(control); 121 122 /* Convert fromr 8-bit to 7-bit address */ 123 address >>= 1; 124 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_TAR, (address & 0xFF)); 125 } 126 127 static uint32_t smu_v11_0_i2c_poll_tx_status(struct i2c_adapter *control) 128 { 129 struct amdgpu_device *adev = to_amdgpu_device(control); 130 uint32_t ret = I2C_OK; 131 uint32_t reg, reg_c_tx_abrt_source; 132 133 /*Check if transmission is completed */ 134 unsigned long timeout_counter = jiffies + msecs_to_jiffies(20); 135 136 do { 137 if (time_after(jiffies, timeout_counter)) { 138 ret |= I2C_SW_TIMEOUT; 139 break; 140 } 141 142 reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS); 143 144 } while (REG_GET_FIELD(reg, CKSVII2C_IC_STATUS, TFE) == 0); 145 146 if (ret != I2C_OK) 147 return ret; 148 149 /* This only checks if NAK is received and transaction got aborted */ 150 reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_INTR_STAT); 151 152 if (REG_GET_FIELD(reg, CKSVII2C_IC_INTR_STAT, R_TX_ABRT) == 1) { 153 reg_c_tx_abrt_source = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_TX_ABRT_SOURCE); 154 DRM_INFO("TX was terminated, IC_TX_ABRT_SOURCE val is:%x", reg_c_tx_abrt_source); 155 156 /* Check for stop due to NACK */ 157 if (REG_GET_FIELD(reg_c_tx_abrt_source, 158 CKSVII2C_IC_TX_ABRT_SOURCE, 159 ABRT_TXDATA_NOACK) == 1) { 160 161 ret |= I2C_NAK_TXDATA_NOACK; 162 163 } else if (REG_GET_FIELD(reg_c_tx_abrt_source, 164 CKSVII2C_IC_TX_ABRT_SOURCE, 165 ABRT_7B_ADDR_NOACK) == 1) { 166 167 ret |= I2C_NAK_7B_ADDR_NOACK; 168 } else { 169 ret |= I2C_ABORT; 170 } 171 172 smu_v11_0_i2c_clear_status(control); 173 } 174 175 return ret; 176 } 177 178 static uint32_t smu_v11_0_i2c_poll_rx_status(struct i2c_adapter *control) 179 { 180 struct amdgpu_device *adev = to_amdgpu_device(control); 181 uint32_t ret = I2C_OK; 182 uint32_t reg_ic_status, reg_c_tx_abrt_source; 183 184 reg_c_tx_abrt_source = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_TX_ABRT_SOURCE); 185 186 /* If slave is not present */ 187 if (REG_GET_FIELD(reg_c_tx_abrt_source, 188 CKSVII2C_IC_TX_ABRT_SOURCE, 189 ABRT_7B_ADDR_NOACK) == 1) { 190 ret |= I2C_NAK_7B_ADDR_NOACK; 191 192 smu_v11_0_i2c_clear_status(control); 193 } else { /* wait till some data is there in RXFIFO */ 194 /* Poll for some byte in RXFIFO */ 195 unsigned long timeout_counter = jiffies + msecs_to_jiffies(20); 196 197 do { 198 if (time_after(jiffies, timeout_counter)) { 199 ret |= I2C_SW_TIMEOUT; 200 break; 201 } 202 203 reg_ic_status = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS); 204 205 } while (REG_GET_FIELD(reg_ic_status, CKSVII2C_IC_STATUS, RFNE) == 0); 206 } 207 208 return ret; 209 } 210 211 212 213 214 /** 215 * smu_v11_0_i2c_transmit - Send a block of data over the I2C bus to a slave device. 216 * 217 * @address: The I2C address of the slave device. 218 * @data: The data to transmit over the bus. 219 * @numbytes: The amount of data to transmit. 220 * @i2c_flag: Flags for transmission 221 * 222 * Returns 0 on success or error. 223 */ 224 static uint32_t smu_v11_0_i2c_transmit(struct i2c_adapter *control, 225 uint8_t address, uint8_t *data, 226 uint32_t numbytes, uint32_t i2c_flag) 227 { 228 struct amdgpu_device *adev = to_amdgpu_device(control); 229 uint32_t bytes_sent, reg, ret = 0; 230 unsigned long timeout_counter; 231 232 bytes_sent = 0; 233 234 DRM_DEBUG_DRIVER("I2C_Transmit(), address = %x, bytes = %d , data: ", 235 (uint16_t)address, numbytes); 236 237 if (drm_debug & DRM_UT_DRIVER) { 238 print_hex_dump(KERN_INFO, "data: ", DUMP_PREFIX_NONE, 239 16, 1, data, numbytes, false); 240 } 241 242 /* Set the I2C slave address */ 243 smu_v11_0_i2c_set_address(control, address); 244 /* Enable I2C */ 245 smu_v11_0_i2c_enable(control, true); 246 247 /* Clear status bits */ 248 smu_v11_0_i2c_clear_status(control); 249 250 251 timeout_counter = jiffies + msecs_to_jiffies(20); 252 253 while (numbytes > 0) { 254 reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS); 255 if (REG_GET_FIELD(reg, CKSVII2C_IC_STATUS, TFNF)) { 256 do { 257 reg = 0; 258 /* 259 * Prepare transaction, no need to set RESTART. I2C engine will send 260 * START as soon as it sees data in TXFIFO 261 */ 262 if (bytes_sent == 0) 263 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, RESTART, 264 (i2c_flag & I2C_RESTART) ? 1 : 0); 265 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, DAT, data[bytes_sent]); 266 267 /* determine if we need to send STOP bit or not */ 268 if (numbytes == 1) 269 /* Final transaction, so send stop unless I2C_NO_STOP */ 270 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, STOP, 271 (i2c_flag & I2C_NO_STOP) ? 0 : 1); 272 /* Write */ 273 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, CMD, 0); 274 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_DATA_CMD, reg); 275 276 /* Record that the bytes were transmitted */ 277 bytes_sent++; 278 numbytes--; 279 280 reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS); 281 282 } while (numbytes && REG_GET_FIELD(reg, CKSVII2C_IC_STATUS, TFNF)); 283 } 284 285 /* 286 * We waited too long for the transmission FIFO to become not-full. 287 * Exit the loop with error. 288 */ 289 if (time_after(jiffies, timeout_counter)) { 290 ret |= I2C_SW_TIMEOUT; 291 goto Err; 292 } 293 } 294 295 ret = smu_v11_0_i2c_poll_tx_status(control); 296 297 Err: 298 /* Any error, no point in proceeding */ 299 if (ret != I2C_OK) { 300 if (ret & I2C_SW_TIMEOUT) 301 DRM_ERROR("TIMEOUT ERROR !!!"); 302 303 if (ret & I2C_NAK_7B_ADDR_NOACK) 304 DRM_ERROR("Received I2C_NAK_7B_ADDR_NOACK !!!"); 305 306 307 if (ret & I2C_NAK_TXDATA_NOACK) 308 DRM_ERROR("Received I2C_NAK_TXDATA_NOACK !!!"); 309 } 310 311 return ret; 312 } 313 314 315 /** 316 * smu_v11_0_i2c_receive - Receive a block of data over the I2C bus from a slave device. 317 * 318 * @address: The I2C address of the slave device. 319 * @numbytes: The amount of data to transmit. 320 * @i2c_flag: Flags for transmission 321 * 322 * Returns 0 on success or error. 323 */ 324 static uint32_t smu_v11_0_i2c_receive(struct i2c_adapter *control, 325 uint8_t address, uint8_t *data, 326 uint32_t numbytes, uint8_t i2c_flag) 327 { 328 struct amdgpu_device *adev = to_amdgpu_device(control); 329 uint32_t bytes_received, ret = I2C_OK; 330 331 bytes_received = 0; 332 333 /* Set the I2C slave address */ 334 smu_v11_0_i2c_set_address(control, address); 335 336 /* Enable I2C */ 337 smu_v11_0_i2c_enable(control, true); 338 339 while (numbytes > 0) { 340 uint32_t reg = 0; 341 342 smu_v11_0_i2c_clear_status(control); 343 344 345 /* Prepare transaction */ 346 347 /* Each time we disable I2C, so this is not a restart */ 348 if (bytes_received == 0) 349 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, RESTART, 350 (i2c_flag & I2C_RESTART) ? 1 : 0); 351 352 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, DAT, 0); 353 /* Read */ 354 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, CMD, 1); 355 356 /* Transmitting last byte */ 357 if (numbytes == 1) 358 /* Final transaction, so send stop if requested */ 359 reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, STOP, 360 (i2c_flag & I2C_NO_STOP) ? 0 : 1); 361 362 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_DATA_CMD, reg); 363 364 ret = smu_v11_0_i2c_poll_rx_status(control); 365 366 /* Any error, no point in proceeding */ 367 if (ret != I2C_OK) { 368 if (ret & I2C_SW_TIMEOUT) 369 DRM_ERROR("TIMEOUT ERROR !!!"); 370 371 if (ret & I2C_NAK_7B_ADDR_NOACK) 372 DRM_ERROR("Received I2C_NAK_7B_ADDR_NOACK !!!"); 373 374 if (ret & I2C_NAK_TXDATA_NOACK) 375 DRM_ERROR("Received I2C_NAK_TXDATA_NOACK !!!"); 376 377 break; 378 } 379 380 reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_DATA_CMD); 381 data[bytes_received] = REG_GET_FIELD(reg, CKSVII2C_IC_DATA_CMD, DAT); 382 383 /* Record that the bytes were received */ 384 bytes_received++; 385 numbytes--; 386 } 387 388 DRM_DEBUG_DRIVER("I2C_Receive(), address = %x, bytes = %d, data :", 389 (uint16_t)address, bytes_received); 390 391 if (drm_debug & DRM_UT_DRIVER) { 392 print_hex_dump(KERN_INFO, "data: ", DUMP_PREFIX_NONE, 393 16, 1, data, bytes_received, false); 394 } 395 396 return ret; 397 } 398 399 static void smu_v11_0_i2c_abort(struct i2c_adapter *control) 400 { 401 struct amdgpu_device *adev = to_amdgpu_device(control); 402 uint32_t reg = 0; 403 404 /* Enable I2C engine; */ 405 reg = REG_SET_FIELD(reg, CKSVII2C_IC_ENABLE, ENABLE, 1); 406 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE, reg); 407 408 /* Abort previous transaction */ 409 reg = REG_SET_FIELD(reg, CKSVII2C_IC_ENABLE, ABORT, 1); 410 WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE, reg); 411 412 DRM_DEBUG_DRIVER("I2C_Abort() Done."); 413 } 414 415 416 static bool smu_v11_0_i2c_activity_done(struct i2c_adapter *control) 417 { 418 struct amdgpu_device *adev = to_amdgpu_device(control); 419 420 const uint32_t IDLE_TIMEOUT = 1024; 421 uint32_t timeout_count = 0; 422 uint32_t reg_ic_enable, reg_ic_enable_status, reg_ic_clr_activity; 423 424 reg_ic_enable_status = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE_STATUS); 425 reg_ic_enable = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE); 426 427 428 if ((REG_GET_FIELD(reg_ic_enable, CKSVII2C_IC_ENABLE, ENABLE) == 0) && 429 (REG_GET_FIELD(reg_ic_enable_status, CKSVII2C_IC_ENABLE_STATUS, IC_EN) == 1)) { 430 /* 431 * Nobody is using I2C engine, but engine remains active because 432 * someone missed to send STOP 433 */ 434 smu_v11_0_i2c_abort(control); 435 } else if (REG_GET_FIELD(reg_ic_enable, CKSVII2C_IC_ENABLE, ENABLE) == 0) { 436 /* Nobody is using I2C engine */ 437 return true; 438 } 439 440 /* Keep reading activity bit until it's cleared */ 441 do { 442 reg_ic_clr_activity = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_CLR_ACTIVITY); 443 444 if (REG_GET_FIELD(reg_ic_clr_activity, 445 CKSVII2C_IC_CLR_ACTIVITY, CLR_ACTIVITY) == 0) 446 return true; 447 448 ++timeout_count; 449 450 } while (timeout_count < IDLE_TIMEOUT); 451 452 return false; 453 } 454 455 static void smu_v11_0_i2c_init(struct i2c_adapter *control) 456 { 457 /* Disable clock gating */ 458 smu_v11_0_i2c_set_clock_gating(control, false); 459 460 if (!smu_v11_0_i2c_activity_done(control)) 461 DRM_WARN("I2C busy !"); 462 463 /* Disable I2C */ 464 smu_v11_0_i2c_enable(control, false); 465 466 /* Configure I2C to operate as master and in standard mode */ 467 smu_v11_0_i2c_configure(control); 468 469 /* Initialize the clock to 50 kHz default */ 470 smu_v11_0_i2c_set_clock(control); 471 472 } 473 474 static void smu_v11_0_i2c_fini(struct i2c_adapter *control) 475 { 476 struct amdgpu_device *adev = to_amdgpu_device(control); 477 uint32_t reg_ic_enable_status, reg_ic_enable; 478 479 smu_v11_0_i2c_enable(control, false); 480 481 /* Double check if disabled, else force abort */ 482 reg_ic_enable_status = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE_STATUS); 483 reg_ic_enable = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE); 484 485 if ((REG_GET_FIELD(reg_ic_enable, CKSVII2C_IC_ENABLE, ENABLE) == 0) && 486 (REG_GET_FIELD(reg_ic_enable_status, 487 CKSVII2C_IC_ENABLE_STATUS, IC_EN) == 1)) { 488 /* 489 * Nobody is using I2C engine, but engine remains active because 490 * someone missed to send STOP 491 */ 492 smu_v11_0_i2c_abort(control); 493 } 494 495 /* Restore clock gating */ 496 smu_v11_0_i2c_set_clock_gating(control, true); 497 498 } 499 500 static bool smu_v11_0_i2c_bus_lock(struct i2c_adapter *control) 501 { 502 struct amdgpu_device *adev = to_amdgpu_device(control); 503 504 /* Send PPSMC_MSG_RequestI2CBus */ 505 if (!adev->powerplay.pp_funcs->smu_i2c_bus_access) 506 goto Fail; 507 508 509 if (!adev->powerplay.pp_funcs->smu_i2c_bus_access(adev->powerplay.pp_handle, true)) 510 return true; 511 512 Fail: 513 return false; 514 } 515 516 static bool smu_v11_0_i2c_bus_unlock(struct i2c_adapter *control) 517 { 518 struct amdgpu_device *adev = to_amdgpu_device(control); 519 520 /* Send PPSMC_MSG_RequestI2CBus */ 521 if (!adev->powerplay.pp_funcs->smu_i2c_bus_access) 522 goto Fail; 523 524 /* Send PPSMC_MSG_ReleaseI2CBus */ 525 if (!adev->powerplay.pp_funcs->smu_i2c_bus_access(adev->powerplay.pp_handle, 526 false)) 527 return true; 528 529 Fail: 530 return false; 531 } 532 533 /***************************** EEPROM I2C GLUE ****************************/ 534 535 static uint32_t smu_v11_0_i2c_eeprom_read_data(struct i2c_adapter *control, 536 uint8_t address, 537 uint8_t *data, 538 uint32_t numbytes) 539 { 540 uint32_t ret = 0; 541 542 /* First 2 bytes are dummy write to set EEPROM address */ 543 ret = smu_v11_0_i2c_transmit(control, address, data, 2, I2C_NO_STOP); 544 if (ret != I2C_OK) 545 goto Fail; 546 547 /* Now read data starting with that address */ 548 ret = smu_v11_0_i2c_receive(control, address, data + 2, numbytes - 2, 549 I2C_RESTART); 550 551 Fail: 552 if (ret != I2C_OK) 553 DRM_ERROR("ReadData() - I2C error occurred :%x", ret); 554 555 return ret; 556 } 557 558 static uint32_t smu_v11_0_i2c_eeprom_write_data(struct i2c_adapter *control, 559 uint8_t address, 560 uint8_t *data, 561 uint32_t numbytes) 562 { 563 uint32_t ret; 564 565 ret = smu_v11_0_i2c_transmit(control, address, data, numbytes, 0); 566 567 if (ret != I2C_OK) 568 DRM_ERROR("WriteI2CData() - I2C error occurred :%x", ret); 569 else 570 /* 571 * According to EEPROM spec there is a MAX of 10 ms required for 572 * EEPROM to flush internal RX buffer after STOP was issued at the 573 * end of write transaction. During this time the EEPROM will not be 574 * responsive to any more commands - so wait a bit more. 575 * 576 * TODO Improve to wait for first ACK for slave address after 577 * internal write cycle done. 578 */ 579 msleep(10); 580 581 return ret; 582 583 } 584 585 static void lock_bus(struct i2c_adapter *i2c, unsigned int flags) 586 { 587 struct amdgpu_ras_eeprom_control *control = to_eeprom_control(i2c); 588 589 if (!smu_v11_0_i2c_bus_lock(i2c)) { 590 DRM_ERROR("Failed to lock the bus from SMU"); 591 return; 592 } 593 594 control->bus_locked = true; 595 } 596 597 static int trylock_bus(struct i2c_adapter *i2c, unsigned int flags) 598 { 599 WARN_ONCE(1, "This operation not supposed to run in atomic context!"); 600 return false; 601 } 602 603 static void unlock_bus(struct i2c_adapter *i2c, unsigned int flags) 604 { 605 struct amdgpu_ras_eeprom_control *control = to_eeprom_control(i2c); 606 607 if (!smu_v11_0_i2c_bus_unlock(i2c)) { 608 DRM_ERROR("Failed to unlock the bus from SMU"); 609 return; 610 } 611 612 control->bus_locked = false; 613 } 614 615 static const struct i2c_lock_operations smu_v11_0_i2c_i2c_lock_ops = { 616 .lock_bus = lock_bus, 617 .trylock_bus = trylock_bus, 618 .unlock_bus = unlock_bus, 619 }; 620 621 static int smu_v11_0_i2c_eeprom_i2c_xfer(struct i2c_adapter *i2c_adap, 622 struct i2c_msg *msgs, int num) 623 { 624 int i, ret; 625 struct amdgpu_ras_eeprom_control *control = to_eeprom_control(i2c_adap); 626 627 if (!control->bus_locked) { 628 DRM_ERROR("I2C bus unlocked, stopping transaction!"); 629 return -EIO; 630 } 631 632 smu_v11_0_i2c_init(i2c_adap); 633 634 for (i = 0; i < num; i++) { 635 if (msgs[i].flags & I2C_M_RD) 636 ret = smu_v11_0_i2c_eeprom_read_data(i2c_adap, 637 (uint8_t)msgs[i].addr, 638 msgs[i].buf, msgs[i].len); 639 else 640 ret = smu_v11_0_i2c_eeprom_write_data(i2c_adap, 641 (uint8_t)msgs[i].addr, 642 msgs[i].buf, msgs[i].len); 643 644 if (ret != I2C_OK) { 645 num = -EIO; 646 break; 647 } 648 } 649 650 smu_v11_0_i2c_fini(i2c_adap); 651 return num; 652 } 653 654 static u32 smu_v11_0_i2c_eeprom_i2c_func(struct i2c_adapter *adap) 655 { 656 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 657 } 658 659 660 static const struct i2c_algorithm smu_v11_0_i2c_eeprom_i2c_algo = { 661 .master_xfer = smu_v11_0_i2c_eeprom_i2c_xfer, 662 .functionality = smu_v11_0_i2c_eeprom_i2c_func, 663 }; 664 665 int smu_v11_0_i2c_eeprom_control_init(struct i2c_adapter *control) 666 { 667 struct amdgpu_device *adev = to_amdgpu_device(control); 668 int res; 669 670 control->owner = THIS_MODULE; 671 control->class = I2C_CLASS_SPD; 672 control->dev.parent = &adev->pdev->dev; 673 control->algo = &smu_v11_0_i2c_eeprom_i2c_algo; 674 snprintf(control->name, sizeof(control->name), "RAS EEPROM"); 675 control->lock_ops = &smu_v11_0_i2c_i2c_lock_ops; 676 677 res = i2c_add_adapter(control); 678 if (res) 679 DRM_ERROR("Failed to register hw i2c, err: %d\n", res); 680 681 return res; 682 } 683 684 void smu_v11_0_i2c_eeprom_control_fini(struct i2c_adapter *control) 685 { 686 i2c_del_adapter(control); 687 } 688 689 /* 690 * Keep this for future unit test if bugs arise 691 */ 692 #if 0 693 #define I2C_TARGET_ADDR 0xA0 694 695 bool smu_v11_0_i2c_test_bus(struct i2c_adapter *control) 696 { 697 698 uint32_t ret = I2C_OK; 699 uint8_t data[6] = {0xf, 0, 0xde, 0xad, 0xbe, 0xef}; 700 701 702 DRM_INFO("Begin"); 703 704 if (!smu_v11_0_i2c_bus_lock(control)) { 705 DRM_ERROR("Failed to lock the bus!."); 706 return false; 707 } 708 709 smu_v11_0_i2c_init(control); 710 711 /* Write 0xde to address 0x0000 on the EEPROM */ 712 ret = smu_v11_0_i2c_eeprom_write_data(control, I2C_TARGET_ADDR, data, 6); 713 714 ret = smu_v11_0_i2c_eeprom_read_data(control, I2C_TARGET_ADDR, data, 6); 715 716 smu_v11_0_i2c_fini(control); 717 718 smu_v11_0_i2c_bus_unlock(control); 719 720 721 DRM_INFO("End"); 722 return true; 723 } 724 #endif 725