1# 2# Drm device configuration 3# 4# This driver provides support for the 5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. 6# 7menuconfig DRM 8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" 9 depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU 10 select I2C 11 select I2C_ALGOBIT 12 help 13 Kernel-level support for the Direct Rendering Infrastructure (DRI) 14 introduced in XFree86 4.0. If you say Y here, you need to select 15 the module that's right for your graphics card from the list below. 16 These modules provide support for synchronization, security, and 17 DMA transfers. Please see <http://dri.sourceforge.net/> for more 18 details. You should also select and configure AGP 19 (/dev/agpgart) support. 20 21config DRM_TTM 22 tristate 23 depends on DRM 24 help 25 GPU memory management subsystem for devices with multiple 26 GPU memory types. Will be enabled automatically if a device driver 27 uses it. 28 29config DRM_TDFX 30 tristate "3dfx Banshee/Voodoo3+" 31 depends on DRM && PCI 32 help 33 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), 34 graphics card. If M is selected, the module will be called tdfx. 35 36config DRM_R128 37 tristate "ATI Rage 128" 38 depends on DRM && PCI 39 help 40 Choose this option if you have an ATI Rage 128 graphics card. If M 41 is selected, the module will be called r128. AGP support for 42 this card is strongly suggested (unless you have a PCI version). 43 44config DRM_RADEON 45 tristate "ATI Radeon" 46 depends on DRM && PCI 47 select FB_CFB_FILLRECT 48 select FB_CFB_COPYAREA 49 select FB_CFB_IMAGEBLIT 50 select FB 51 select FRAMEBUFFER_CONSOLE if !EMBEDDED 52 help 53 Choose this option if you have an ATI Radeon graphics card. There 54 are both PCI and AGP versions. You don't need to choose this to 55 run the Radeon in plain VGA mode. 56 57 If M is selected, the module will be called radeon. 58 59config DRM_I810 60 tristate "Intel I810" 61 depends on DRM && AGP && AGP_INTEL 62 help 63 Choose this option if you have an Intel I810 graphics card. If M is 64 selected, the module will be called i810. AGP support is required 65 for this driver to work. 66 67choice 68 prompt "Intel 830M, 845G, 852GM, 855GM, 865G" 69 depends on DRM && AGP && AGP_INTEL 70 optional 71 72config DRM_I830 73 tristate "i830 driver" 74 help 75 Choose this option if you have a system that has Intel 830M, 845G, 76 852GM, 855GM or 865G integrated graphics. If M is selected, the 77 module will be called i830. AGP support is required for this driver 78 to work. This driver is used by the older X releases X.org 6.7 and 79 XFree86 4.3. If unsure, build this and i915 as modules and the X server 80 will load the correct one. 81 82config DRM_I915 83 tristate "i915 driver" 84 depends on AGP_INTEL 85 select FB_CFB_FILLRECT 86 select FB_CFB_COPYAREA 87 select FB_CFB_IMAGEBLIT 88 select FB 89 select FRAMEBUFFER_CONSOLE if !EMBEDDED 90 # i915 depends on ACPI_VIDEO when ACPI is enabled 91 # but for select to work, need to select ACPI_VIDEO's dependencies, ick 92 select VIDEO_OUTPUT_CONTROL if ACPI 93 select BACKLIGHT_CLASS_DEVICE if ACPI 94 select INPUT if ACPI 95 select ACPI_VIDEO if ACPI 96 help 97 Choose this option if you have a system that has Intel 830M, 845G, 98 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the 99 module will be called i915. AGP support is required for this driver 100 to work. This driver is used by the Intel driver in X.org 6.8 and 101 XFree86 4.4 and above. If unsure, build this and i830 as modules and 102 the X server will load the correct one. 103 104config DRM_I915_KMS 105 bool "Enable modesetting on intel by default" 106 depends on DRM_I915 107 help 108 Choose this option if you want kernel modesetting enabled by default, 109 and you have a new enough userspace to support this. Running old 110 userspaces with this enabled will cause pain. Note that this causes 111 the driver to bind to PCI devices, which precludes loading things 112 like intelfb. 113 114endchoice 115 116config DRM_MGA 117 tristate "Matrox g200/g400" 118 depends on DRM 119 help 120 Choose this option if you have a Matrox G200, G400 or G450 graphics 121 card. If M is selected, the module will be called mga. AGP 122 support is required for this driver to work. 123 124config DRM_SIS 125 tristate "SiS video cards" 126 depends on DRM && AGP 127 depends on FB_SIS || FB_SIS=n 128 help 129 Choose this option if you have a SiS 630 or compatible video 130 chipset. If M is selected the module will be called sis. AGP 131 support is required for this driver to work. 132 133config DRM_VIA 134 tristate "Via unichrome video cards" 135 depends on DRM 136 help 137 Choose this option if you have a Via unichrome or compatible video 138 chipset. If M is selected the module will be called via. 139 140config DRM_SAVAGE 141 tristate "Savage video cards" 142 depends on DRM 143 help 144 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister 145 chipset. If M is selected the module will be called savage. 146