1# 2# Drm device configuration 3# 4# This driver provides support for the 5# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. 6# 7menuconfig DRM 8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" 9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU 10 select I2C 11 select I2C_ALGOBIT 12 select SLOW_WORK 13 help 14 Kernel-level support for the Direct Rendering Infrastructure (DRI) 15 introduced in XFree86 4.0. If you say Y here, you need to select 16 the module that's right for your graphics card from the list below. 17 These modules provide support for synchronization, security, and 18 DMA transfers. Please see <http://dri.sourceforge.net/> for more 19 details. You should also select and configure AGP 20 (/dev/agpgart) support if it is available for your platform. 21 22config DRM_KMS_HELPER 23 tristate 24 depends on DRM 25 select FB 26 select FRAMEBUFFER_CONSOLE if !EXPERT 27 help 28 FB and CRTC helpers for KMS drivers. 29 30config DRM_TTM 31 tristate 32 depends on DRM 33 help 34 GPU memory management subsystem for devices with multiple 35 GPU memory types. Will be enabled automatically if a device driver 36 uses it. 37 38config DRM_TDFX 39 tristate "3dfx Banshee/Voodoo3+" 40 depends on DRM && PCI 41 help 42 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), 43 graphics card. If M is selected, the module will be called tdfx. 44 45config DRM_R128 46 tristate "ATI Rage 128" 47 depends on DRM && PCI 48 select FW_LOADER 49 help 50 Choose this option if you have an ATI Rage 128 graphics card. If M 51 is selected, the module will be called r128. AGP support for 52 this card is strongly suggested (unless you have a PCI version). 53 54config DRM_RADEON 55 tristate "ATI Radeon" 56 depends on DRM && PCI 57 select FB_CFB_FILLRECT 58 select FB_CFB_COPYAREA 59 select FB_CFB_IMAGEBLIT 60 select FW_LOADER 61 select DRM_KMS_HELPER 62 select DRM_TTM 63 select POWER_SUPPLY 64 select HWMON 65 help 66 Choose this option if you have an ATI Radeon graphics card. There 67 are both PCI and AGP versions. You don't need to choose this to 68 run the Radeon in plain VGA mode. 69 70 If M is selected, the module will be called radeon. 71 72source "drivers/gpu/drm/radeon/Kconfig" 73 74config DRM_I810 75 tristate "Intel I810" 76 # !PREEMPT because of missing ioctl locking 77 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN) 78 help 79 Choose this option if you have an Intel I810 graphics card. If M is 80 selected, the module will be called i810. AGP support is required 81 for this driver to work. 82 83config DRM_I915 84 tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics" 85 depends on DRM 86 depends on AGP 87 depends on AGP_INTEL 88 # we need shmfs for the swappable backing store, and in particular 89 # the shmem_readpage() which depends upon tmpfs 90 select SHMEM 91 select TMPFS 92 select DRM_KMS_HELPER 93 select FB_CFB_FILLRECT 94 select FB_CFB_COPYAREA 95 select FB_CFB_IMAGEBLIT 96 # i915 depends on ACPI_VIDEO when ACPI is enabled 97 # but for select to work, need to select ACPI_VIDEO's dependencies, ick 98 select BACKLIGHT_CLASS_DEVICE if ACPI 99 select INPUT if ACPI 100 select ACPI_VIDEO if ACPI 101 select ACPI_BUTTON if ACPI 102 help 103 Choose this option if you have a system that has "Intel Graphics 104 Media Accelerator" or "HD Graphics" integrated graphics, 105 including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G, 106 G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3, 107 Core i5, Core i7 as well as Atom CPUs with integrated graphics. 108 If M is selected, the module will be called i915. AGP support 109 is required for this driver to work. This driver is used by 110 the Intel driver in X.org 6.8 and XFree86 4.4 and above. It 111 replaces the older i830 module that supported a subset of the 112 hardware in older X.org releases. 113 114 Note that the older i810/i815 chipsets require the use of the 115 i810 driver instead, and the Atom z5xx series has an entirely 116 different implementation. 117 118config DRM_I915_KMS 119 bool "Enable modesetting on intel by default" 120 depends on DRM_I915 121 help 122 Choose this option if you want kernel modesetting enabled by default, 123 and you have a new enough userspace to support this. Running old 124 userspaces with this enabled will cause pain. Note that this causes 125 the driver to bind to PCI devices, which precludes loading things 126 like intelfb. 127 128config DRM_MGA 129 tristate "Matrox g200/g400" 130 depends on DRM && PCI 131 select FW_LOADER 132 help 133 Choose this option if you have a Matrox G200, G400 or G450 graphics 134 card. If M is selected, the module will be called mga. AGP 135 support is required for this driver to work. 136 137config DRM_SIS 138 tristate "SiS video cards" 139 depends on DRM && AGP 140 depends on FB_SIS || FB_SIS=n 141 help 142 Choose this option if you have a SiS 630 or compatible video 143 chipset. If M is selected the module will be called sis. AGP 144 support is required for this driver to work. 145 146config DRM_VIA 147 tristate "Via unichrome video cards" 148 depends on DRM && PCI 149 help 150 Choose this option if you have a Via unichrome or compatible video 151 chipset. If M is selected the module will be called via. 152 153config DRM_SAVAGE 154 tristate "Savage video cards" 155 depends on DRM && PCI 156 help 157 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister 158 chipset. If M is selected the module will be called savage. 159