xref: /openbmc/linux/drivers/gpio/gpio-xtensa.c (revision f1575595)
1 /*
2  * Copyright (C) 2013 TangoTec Ltd.
3  * Author: Baruch Siach <baruch@tkos.co.il>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License version 2 as
7  * published by the Free Software Foundation.
8  *
9  * Driver for the Xtensa LX4 GPIO32 Option
10  *
11  * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
12  *
13  * GPIO32 is a standard optional extension to the Xtensa architecture core that
14  * provides preconfigured output and input ports for intra SoC signaling. The
15  * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
16  * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
17  * driver treats input and output states as two distinct devices.
18  *
19  * Access to GPIO32 specific instructions is controlled by the CPENABLE
20  * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
21  * disables access to all coprocessors. This driver sets the CPENABLE bit
22  * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
23  * CPENABLE state after that.
24  *
25  * This driver is currently incompatible with SMP. The GPIO32 extension is not
26  * guaranteed to be available in all cores. Moreover, each core controls a
27  * different set of IO wires. A theoretical SMP aware version of this driver
28  * would need to have a per core workqueue to do the actual GPIO manipulation.
29  */
30 
31 #include <linux/err.h>
32 #include <linux/module.h>
33 #include <linux/gpio.h>
34 #include <linux/bitops.h>
35 #include <linux/platform_device.h>
36 
37 #include <asm/coprocessor.h> /* CPENABLE read/write macros */
38 
39 #ifndef XCHAL_CP_ID_XTIOP
40 #error GPIO32 option is not enabled for your xtensa core variant
41 #endif
42 
43 #if XCHAL_HAVE_CP
44 
45 static inline unsigned long enable_cp(unsigned long *cpenable)
46 {
47 	unsigned long flags;
48 
49 	local_irq_save(flags);
50 	RSR_CPENABLE(*cpenable);
51 	WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
52 
53 	return flags;
54 }
55 
56 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
57 {
58 	WSR_CPENABLE(cpenable);
59 	local_irq_restore(flags);
60 }
61 
62 #else
63 
64 static inline unsigned long enable_cp(unsigned long *cpenable)
65 {
66 	*cpenable = 0; /* avoid uninitialized value warning */
67 	return 0;
68 }
69 
70 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
71 {
72 }
73 
74 #endif /* XCHAL_HAVE_CP */
75 
76 static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
77 {
78 	return 1; /* input only */
79 }
80 
81 static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
82 {
83 	unsigned long flags, saved_cpenable;
84 	u32 impwire;
85 
86 	flags = enable_cp(&saved_cpenable);
87 	__asm__ __volatile__("read_impwire %0" : "=a" (impwire));
88 	disable_cp(flags, saved_cpenable);
89 
90 	return !!(impwire & BIT(offset));
91 }
92 
93 static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
94 				    int value)
95 {
96 	BUG(); /* output only; should never be called */
97 }
98 
99 static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
100 {
101 	return 0; /* output only */
102 }
103 
104 static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
105 {
106 	unsigned long flags, saved_cpenable;
107 	u32 expstate;
108 
109 	flags = enable_cp(&saved_cpenable);
110 	__asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
111 	disable_cp(flags, saved_cpenable);
112 
113 	return !!(expstate & BIT(offset));
114 }
115 
116 static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
117 				     int value)
118 {
119 	unsigned long flags, saved_cpenable;
120 	u32 mask = BIT(offset);
121 	u32 val = value ? BIT(offset) : 0;
122 
123 	flags = enable_cp(&saved_cpenable);
124 	__asm__ __volatile__("wrmsk_expstate %0, %1"
125 			     :: "a" (val), "a" (mask));
126 	disable_cp(flags, saved_cpenable);
127 }
128 
129 static struct gpio_chip impwire_chip = {
130 	.label		= "impwire",
131 	.base		= -1,
132 	.ngpio		= 32,
133 	.get_direction	= xtensa_impwire_get_direction,
134 	.get		= xtensa_impwire_get_value,
135 	.set		= xtensa_impwire_set_value,
136 };
137 
138 static struct gpio_chip expstate_chip = {
139 	.label		= "expstate",
140 	.base		= -1,
141 	.ngpio		= 32,
142 	.get_direction	= xtensa_expstate_get_direction,
143 	.get		= xtensa_expstate_get_value,
144 	.set		= xtensa_expstate_set_value,
145 };
146 
147 static int xtensa_gpio_probe(struct platform_device *pdev)
148 {
149 	int ret;
150 
151 	ret = gpiochip_add_data(&impwire_chip, NULL);
152 	if (ret)
153 		return ret;
154 	return gpiochip_add_data(&expstate_chip, NULL);
155 }
156 
157 static struct platform_driver xtensa_gpio_driver = {
158 	.driver		= {
159 		.name		= "xtensa-gpio",
160 	},
161 	.probe		= xtensa_gpio_probe,
162 };
163 
164 static int __init xtensa_gpio_init(void)
165 {
166 	struct platform_device *pdev;
167 
168 	pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
169 	if (IS_ERR(pdev))
170 		return PTR_ERR(pdev);
171 
172 	return platform_driver_register(&xtensa_gpio_driver);
173 }
174 device_initcall(xtensa_gpio_init);
175 
176 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
177 MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
178 MODULE_LICENSE("GPL");
179