xref: /openbmc/linux/drivers/gpio/gpio-xtensa.c (revision bef7a78d)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2013 TangoTec Ltd.
4  * Author: Baruch Siach <baruch@tkos.co.il>
5  *
6  * Driver for the Xtensa LX4 GPIO32 Option
7  *
8  * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
9  *
10  * GPIO32 is a standard optional extension to the Xtensa architecture core that
11  * provides preconfigured output and input ports for intra SoC signaling. The
12  * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
13  * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
14  * driver treats input and output states as two distinct devices.
15  *
16  * Access to GPIO32 specific instructions is controlled by the CPENABLE
17  * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
18  * disables access to all coprocessors. This driver sets the CPENABLE bit
19  * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
20  * CPENABLE state after that.
21  *
22  * This driver is currently incompatible with SMP. The GPIO32 extension is not
23  * guaranteed to be available in all cores. Moreover, each core controls a
24  * different set of IO wires. A theoretical SMP aware version of this driver
25  * would need to have a per core workqueue to do the actual GPIO manipulation.
26  */
27 
28 #include <linux/err.h>
29 #include <linux/module.h>
30 #include <linux/gpio/driver.h>
31 #include <linux/bitops.h>
32 #include <linux/platform_device.h>
33 
34 #include <asm/coprocessor.h> /* CPENABLE read/write macros */
35 
36 #ifndef XCHAL_CP_ID_XTIOP
37 #error GPIO32 option is not enabled for your xtensa core variant
38 #endif
39 
40 #if XCHAL_HAVE_CP
41 
42 static inline unsigned long enable_cp(unsigned long *cpenable)
43 {
44 	unsigned long flags;
45 
46 	local_irq_save(flags);
47 	*cpenable = xtensa_get_sr(cpenable);
48 	xtensa_set_sr(*cpenable | BIT(XCHAL_CP_ID_XTIOP), cpenable);
49 	return flags;
50 }
51 
52 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
53 {
54 	xtensa_set_sr(cpenable, cpenable);
55 	local_irq_restore(flags);
56 }
57 
58 #else
59 
60 static inline unsigned long enable_cp(unsigned long *cpenable)
61 {
62 	*cpenable = 0; /* avoid uninitialized value warning */
63 	return 0;
64 }
65 
66 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
67 {
68 }
69 
70 #endif /* XCHAL_HAVE_CP */
71 
72 static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
73 {
74 	return GPIO_LINE_DIRECTION_IN; /* input only */
75 }
76 
77 static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
78 {
79 	unsigned long flags, saved_cpenable;
80 	u32 impwire;
81 
82 	flags = enable_cp(&saved_cpenable);
83 	__asm__ __volatile__("read_impwire %0" : "=a" (impwire));
84 	disable_cp(flags, saved_cpenable);
85 
86 	return !!(impwire & BIT(offset));
87 }
88 
89 static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
90 				    int value)
91 {
92 	BUG(); /* output only; should never be called */
93 }
94 
95 static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
96 {
97 	return GPIO_LINE_DIRECTION_OUT; /* output only */
98 }
99 
100 static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
101 {
102 	unsigned long flags, saved_cpenable;
103 	u32 expstate;
104 
105 	flags = enable_cp(&saved_cpenable);
106 	__asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
107 	disable_cp(flags, saved_cpenable);
108 
109 	return !!(expstate & BIT(offset));
110 }
111 
112 static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
113 				     int value)
114 {
115 	unsigned long flags, saved_cpenable;
116 	u32 mask = BIT(offset);
117 	u32 val = value ? BIT(offset) : 0;
118 
119 	flags = enable_cp(&saved_cpenable);
120 	__asm__ __volatile__("wrmsk_expstate %0, %1"
121 			     :: "a" (val), "a" (mask));
122 	disable_cp(flags, saved_cpenable);
123 }
124 
125 static struct gpio_chip impwire_chip = {
126 	.label		= "impwire",
127 	.base		= -1,
128 	.ngpio		= 32,
129 	.get_direction	= xtensa_impwire_get_direction,
130 	.get		= xtensa_impwire_get_value,
131 	.set		= xtensa_impwire_set_value,
132 };
133 
134 static struct gpio_chip expstate_chip = {
135 	.label		= "expstate",
136 	.base		= -1,
137 	.ngpio		= 32,
138 	.get_direction	= xtensa_expstate_get_direction,
139 	.get		= xtensa_expstate_get_value,
140 	.set		= xtensa_expstate_set_value,
141 };
142 
143 static int xtensa_gpio_probe(struct platform_device *pdev)
144 {
145 	int ret;
146 
147 	ret = gpiochip_add_data(&impwire_chip, NULL);
148 	if (ret)
149 		return ret;
150 	return gpiochip_add_data(&expstate_chip, NULL);
151 }
152 
153 static struct platform_driver xtensa_gpio_driver = {
154 	.driver		= {
155 		.name		= "xtensa-gpio",
156 	},
157 	.probe		= xtensa_gpio_probe,
158 };
159 
160 static int __init xtensa_gpio_init(void)
161 {
162 	struct platform_device *pdev;
163 
164 	pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
165 	if (IS_ERR(pdev))
166 		return PTR_ERR(pdev);
167 
168 	return platform_driver_register(&xtensa_gpio_driver);
169 }
170 device_initcall(xtensa_gpio_init);
171 
172 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
173 MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
174 MODULE_LICENSE("GPL");
175