xref: /openbmc/linux/drivers/gpio/gpio-xtensa.c (revision 9fb29c73)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2013 TangoTec Ltd.
4  * Author: Baruch Siach <baruch@tkos.co.il>
5  *
6  * Driver for the Xtensa LX4 GPIO32 Option
7  *
8  * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
9  *
10  * GPIO32 is a standard optional extension to the Xtensa architecture core that
11  * provides preconfigured output and input ports for intra SoC signaling. The
12  * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
13  * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
14  * driver treats input and output states as two distinct devices.
15  *
16  * Access to GPIO32 specific instructions is controlled by the CPENABLE
17  * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
18  * disables access to all coprocessors. This driver sets the CPENABLE bit
19  * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
20  * CPENABLE state after that.
21  *
22  * This driver is currently incompatible with SMP. The GPIO32 extension is not
23  * guaranteed to be available in all cores. Moreover, each core controls a
24  * different set of IO wires. A theoretical SMP aware version of this driver
25  * would need to have a per core workqueue to do the actual GPIO manipulation.
26  */
27 
28 #include <linux/err.h>
29 #include <linux/module.h>
30 #include <linux/gpio/driver.h>
31 #include <linux/bitops.h>
32 #include <linux/platform_device.h>
33 
34 #include <asm/coprocessor.h> /* CPENABLE read/write macros */
35 
36 #ifndef XCHAL_CP_ID_XTIOP
37 #error GPIO32 option is not enabled for your xtensa core variant
38 #endif
39 
40 #if XCHAL_HAVE_CP
41 
42 static inline unsigned long enable_cp(unsigned long *cpenable)
43 {
44 	unsigned long flags;
45 
46 	local_irq_save(flags);
47 	RSR_CPENABLE(*cpenable);
48 	WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
49 
50 	return flags;
51 }
52 
53 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
54 {
55 	WSR_CPENABLE(cpenable);
56 	local_irq_restore(flags);
57 }
58 
59 #else
60 
61 static inline unsigned long enable_cp(unsigned long *cpenable)
62 {
63 	*cpenable = 0; /* avoid uninitialized value warning */
64 	return 0;
65 }
66 
67 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
68 {
69 }
70 
71 #endif /* XCHAL_HAVE_CP */
72 
73 static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
74 {
75 	return 1; /* input only */
76 }
77 
78 static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
79 {
80 	unsigned long flags, saved_cpenable;
81 	u32 impwire;
82 
83 	flags = enable_cp(&saved_cpenable);
84 	__asm__ __volatile__("read_impwire %0" : "=a" (impwire));
85 	disable_cp(flags, saved_cpenable);
86 
87 	return !!(impwire & BIT(offset));
88 }
89 
90 static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
91 				    int value)
92 {
93 	BUG(); /* output only; should never be called */
94 }
95 
96 static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
97 {
98 	return 0; /* output only */
99 }
100 
101 static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
102 {
103 	unsigned long flags, saved_cpenable;
104 	u32 expstate;
105 
106 	flags = enable_cp(&saved_cpenable);
107 	__asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
108 	disable_cp(flags, saved_cpenable);
109 
110 	return !!(expstate & BIT(offset));
111 }
112 
113 static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
114 				     int value)
115 {
116 	unsigned long flags, saved_cpenable;
117 	u32 mask = BIT(offset);
118 	u32 val = value ? BIT(offset) : 0;
119 
120 	flags = enable_cp(&saved_cpenable);
121 	__asm__ __volatile__("wrmsk_expstate %0, %1"
122 			     :: "a" (val), "a" (mask));
123 	disable_cp(flags, saved_cpenable);
124 }
125 
126 static struct gpio_chip impwire_chip = {
127 	.label		= "impwire",
128 	.base		= -1,
129 	.ngpio		= 32,
130 	.get_direction	= xtensa_impwire_get_direction,
131 	.get		= xtensa_impwire_get_value,
132 	.set		= xtensa_impwire_set_value,
133 };
134 
135 static struct gpio_chip expstate_chip = {
136 	.label		= "expstate",
137 	.base		= -1,
138 	.ngpio		= 32,
139 	.get_direction	= xtensa_expstate_get_direction,
140 	.get		= xtensa_expstate_get_value,
141 	.set		= xtensa_expstate_set_value,
142 };
143 
144 static int xtensa_gpio_probe(struct platform_device *pdev)
145 {
146 	int ret;
147 
148 	ret = gpiochip_add_data(&impwire_chip, NULL);
149 	if (ret)
150 		return ret;
151 	return gpiochip_add_data(&expstate_chip, NULL);
152 }
153 
154 static struct platform_driver xtensa_gpio_driver = {
155 	.driver		= {
156 		.name		= "xtensa-gpio",
157 	},
158 	.probe		= xtensa_gpio_probe,
159 };
160 
161 static int __init xtensa_gpio_init(void)
162 {
163 	struct platform_device *pdev;
164 
165 	pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
166 	if (IS_ERR(pdev))
167 		return PTR_ERR(pdev);
168 
169 	return platform_driver_register(&xtensa_gpio_driver);
170 }
171 device_initcall(xtensa_gpio_init);
172 
173 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
174 MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
175 MODULE_LICENSE("GPL");
176