1 /* 2 * Xilinx gpio driver for xps/axi_gpio IP. 3 * 4 * Copyright 2008 - 2013 Xilinx, Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 8 * as published by the Free Software Foundation. 9 * 10 * You should have received a copy of the GNU General Public License 11 * along with this program; if not, write to the Free Software 12 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 13 */ 14 15 #include <linux/bitops.h> 16 #include <linux/init.h> 17 #include <linux/errno.h> 18 #include <linux/module.h> 19 #include <linux/of_device.h> 20 #include <linux/of_platform.h> 21 #include <linux/of_gpio.h> 22 #include <linux/io.h> 23 #include <linux/gpio.h> 24 #include <linux/slab.h> 25 26 /* Register Offset Definitions */ 27 #define XGPIO_DATA_OFFSET (0x0) /* Data register */ 28 #define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ 29 30 #define XGPIO_CHANNEL_OFFSET 0x8 31 32 /* Read/Write access to the GPIO registers */ 33 #if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86) 34 # define xgpio_readreg(offset) readl(offset) 35 # define xgpio_writereg(offset, val) writel(val, offset) 36 #else 37 # define xgpio_readreg(offset) __raw_readl(offset) 38 # define xgpio_writereg(offset, val) __raw_writel(val, offset) 39 #endif 40 41 /** 42 * struct xgpio_instance - Stores information about GPIO device 43 * @mmchip: OF GPIO chip for memory mapped banks 44 * @gpio_width: GPIO width for every channel 45 * @gpio_state: GPIO state shadow register 46 * @gpio_dir: GPIO direction shadow register 47 * @gpio_lock: Lock used for synchronization 48 */ 49 struct xgpio_instance { 50 struct of_mm_gpio_chip mmchip; 51 unsigned int gpio_width[2]; 52 u32 gpio_state[2]; 53 u32 gpio_dir[2]; 54 spinlock_t gpio_lock[2]; 55 }; 56 57 static inline int xgpio_index(struct xgpio_instance *chip, int gpio) 58 { 59 if (gpio >= chip->gpio_width[0]) 60 return 1; 61 62 return 0; 63 } 64 65 static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio) 66 { 67 if (xgpio_index(chip, gpio)) 68 return XGPIO_CHANNEL_OFFSET; 69 70 return 0; 71 } 72 73 static inline int xgpio_offset(struct xgpio_instance *chip, int gpio) 74 { 75 if (xgpio_index(chip, gpio)) 76 return gpio - chip->gpio_width[0]; 77 78 return gpio; 79 } 80 81 /** 82 * xgpio_get - Read the specified signal of the GPIO device. 83 * @gc: Pointer to gpio_chip device structure. 84 * @gpio: GPIO signal number. 85 * 86 * This function reads the specified signal of the GPIO device. 87 * 88 * Return: 89 * 0 if direction of GPIO signals is set as input otherwise it 90 * returns negative error value. 91 */ 92 static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) 93 { 94 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 95 struct xgpio_instance *chip = gpiochip_get_data(gc); 96 u32 val; 97 98 val = xgpio_readreg(mm_gc->regs + XGPIO_DATA_OFFSET + 99 xgpio_regoffset(chip, gpio)); 100 101 return !!(val & BIT(xgpio_offset(chip, gpio))); 102 } 103 104 /** 105 * xgpio_set - Write the specified signal of the GPIO device. 106 * @gc: Pointer to gpio_chip device structure. 107 * @gpio: GPIO signal number. 108 * @val: Value to be written to specified signal. 109 * 110 * This function writes the specified value in to the specified signal of the 111 * GPIO device. 112 */ 113 static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) 114 { 115 unsigned long flags; 116 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 117 struct xgpio_instance *chip = gpiochip_get_data(gc); 118 int index = xgpio_index(chip, gpio); 119 int offset = xgpio_offset(chip, gpio); 120 121 spin_lock_irqsave(&chip->gpio_lock[index], flags); 122 123 /* Write to GPIO signal and set its direction to output */ 124 if (val) 125 chip->gpio_state[index] |= BIT(offset); 126 else 127 chip->gpio_state[index] &= ~BIT(offset); 128 129 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + 130 xgpio_regoffset(chip, gpio), chip->gpio_state[index]); 131 132 spin_unlock_irqrestore(&chip->gpio_lock[index], flags); 133 } 134 135 /** 136 * xgpio_set_multiple - Write the specified signals of the GPIO device. 137 * @gc: Pointer to gpio_chip device structure. 138 * @mask: Mask of the GPIOS to modify. 139 * @bits: Value to be wrote on each GPIO 140 * 141 * This function writes the specified values into the specified signals of the 142 * GPIO devices. 143 */ 144 static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, 145 unsigned long *bits) 146 { 147 unsigned long flags; 148 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 149 struct xgpio_instance *chip = gpiochip_get_data(gc); 150 int index = xgpio_index(chip, 0); 151 int offset, i; 152 153 spin_lock_irqsave(&chip->gpio_lock[index], flags); 154 155 /* Write to GPIO signals */ 156 for (i = 0; i < gc->ngpio; i++) { 157 if (*mask == 0) 158 break; 159 if (index != xgpio_index(chip, i)) { 160 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + 161 xgpio_regoffset(chip, i), 162 chip->gpio_state[index]); 163 spin_unlock_irqrestore(&chip->gpio_lock[index], flags); 164 index = xgpio_index(chip, i); 165 spin_lock_irqsave(&chip->gpio_lock[index], flags); 166 } 167 if (__test_and_clear_bit(i, mask)) { 168 offset = xgpio_offset(chip, i); 169 if (test_bit(i, bits)) 170 chip->gpio_state[index] |= BIT(offset); 171 else 172 chip->gpio_state[index] &= ~BIT(offset); 173 } 174 } 175 176 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + 177 xgpio_regoffset(chip, i), chip->gpio_state[index]); 178 179 spin_unlock_irqrestore(&chip->gpio_lock[index], flags); 180 } 181 182 /** 183 * xgpio_dir_in - Set the direction of the specified GPIO signal as input. 184 * @gc: Pointer to gpio_chip device structure. 185 * @gpio: GPIO signal number. 186 * 187 * Return: 188 * 0 - if direction of GPIO signals is set as input 189 * otherwise it returns negative error value. 190 */ 191 static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) 192 { 193 unsigned long flags; 194 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 195 struct xgpio_instance *chip = gpiochip_get_data(gc); 196 int index = xgpio_index(chip, gpio); 197 int offset = xgpio_offset(chip, gpio); 198 199 spin_lock_irqsave(&chip->gpio_lock[index], flags); 200 201 /* Set the GPIO bit in shadow register and set direction as input */ 202 chip->gpio_dir[index] |= BIT(offset); 203 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + 204 xgpio_regoffset(chip, gpio), chip->gpio_dir[index]); 205 206 spin_unlock_irqrestore(&chip->gpio_lock[index], flags); 207 208 return 0; 209 } 210 211 /** 212 * xgpio_dir_out - Set the direction of the specified GPIO signal as output. 213 * @gc: Pointer to gpio_chip device structure. 214 * @gpio: GPIO signal number. 215 * @val: Value to be written to specified signal. 216 * 217 * This function sets the direction of specified GPIO signal as output. 218 * 219 * Return: 220 * If all GPIO signals of GPIO chip is configured as input then it returns 221 * error otherwise it returns 0. 222 */ 223 static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) 224 { 225 unsigned long flags; 226 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 227 struct xgpio_instance *chip = gpiochip_get_data(gc); 228 int index = xgpio_index(chip, gpio); 229 int offset = xgpio_offset(chip, gpio); 230 231 spin_lock_irqsave(&chip->gpio_lock[index], flags); 232 233 /* Write state of GPIO signal */ 234 if (val) 235 chip->gpio_state[index] |= BIT(offset); 236 else 237 chip->gpio_state[index] &= ~BIT(offset); 238 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + 239 xgpio_regoffset(chip, gpio), chip->gpio_state[index]); 240 241 /* Clear the GPIO bit in shadow register and set direction as output */ 242 chip->gpio_dir[index] &= ~BIT(offset); 243 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + 244 xgpio_regoffset(chip, gpio), chip->gpio_dir[index]); 245 246 spin_unlock_irqrestore(&chip->gpio_lock[index], flags); 247 248 return 0; 249 } 250 251 /** 252 * xgpio_save_regs - Set initial values of GPIO pins 253 * @mm_gc: Pointer to memory mapped GPIO chip structure 254 */ 255 static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc) 256 { 257 struct xgpio_instance *chip = 258 container_of(mm_gc, struct xgpio_instance, mmchip); 259 260 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]); 261 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]); 262 263 if (!chip->gpio_width[1]) 264 return; 265 266 xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET, 267 chip->gpio_state[1]); 268 xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET, 269 chip->gpio_dir[1]); 270 } 271 272 /** 273 * xgpio_remove - Remove method for the GPIO device. 274 * @pdev: pointer to the platform device 275 * 276 * This function remove gpiochips and frees all the allocated resources. 277 * 278 * Return: 0 always 279 */ 280 static int xgpio_remove(struct platform_device *pdev) 281 { 282 struct xgpio_instance *chip = platform_get_drvdata(pdev); 283 284 of_mm_gpiochip_remove(&chip->mmchip); 285 286 return 0; 287 } 288 289 /** 290 * xgpio_of_probe - Probe method for the GPIO device. 291 * @pdev: pointer to the platform device 292 * 293 * Return: 294 * It returns 0, if the driver is bound to the GPIO device, or 295 * a negative value if there is an error. 296 */ 297 static int xgpio_probe(struct platform_device *pdev) 298 { 299 struct xgpio_instance *chip; 300 int status = 0; 301 struct device_node *np = pdev->dev.of_node; 302 u32 is_dual; 303 304 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); 305 if (!chip) 306 return -ENOMEM; 307 308 platform_set_drvdata(pdev, chip); 309 310 /* Update GPIO state shadow register with default value */ 311 of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]); 312 313 /* Update GPIO direction shadow register with default value */ 314 if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0])) 315 chip->gpio_dir[0] = 0xFFFFFFFF; 316 317 /* 318 * Check device node and parent device node for device width 319 * and assume default width of 32 320 */ 321 if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0])) 322 chip->gpio_width[0] = 32; 323 324 spin_lock_init(&chip->gpio_lock[0]); 325 326 if (of_property_read_u32(np, "xlnx,is-dual", &is_dual)) 327 is_dual = 0; 328 329 if (is_dual) { 330 /* Update GPIO state shadow register with default value */ 331 of_property_read_u32(np, "xlnx,dout-default-2", 332 &chip->gpio_state[1]); 333 334 /* Update GPIO direction shadow register with default value */ 335 if (of_property_read_u32(np, "xlnx,tri-default-2", 336 &chip->gpio_dir[1])) 337 chip->gpio_dir[1] = 0xFFFFFFFF; 338 339 /* 340 * Check device node and parent device node for device width 341 * and assume default width of 32 342 */ 343 if (of_property_read_u32(np, "xlnx,gpio2-width", 344 &chip->gpio_width[1])) 345 chip->gpio_width[1] = 32; 346 347 spin_lock_init(&chip->gpio_lock[1]); 348 } 349 350 chip->mmchip.gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1]; 351 chip->mmchip.gc.parent = &pdev->dev; 352 chip->mmchip.gc.direction_input = xgpio_dir_in; 353 chip->mmchip.gc.direction_output = xgpio_dir_out; 354 chip->mmchip.gc.get = xgpio_get; 355 chip->mmchip.gc.set = xgpio_set; 356 chip->mmchip.gc.set_multiple = xgpio_set_multiple; 357 358 chip->mmchip.save_regs = xgpio_save_regs; 359 360 /* Call the OF gpio helper to setup and register the GPIO device */ 361 status = of_mm_gpiochip_add_data(np, &chip->mmchip, chip); 362 if (status) { 363 pr_err("%s: error in probe function with status %d\n", 364 np->full_name, status); 365 return status; 366 } 367 368 return 0; 369 } 370 371 static const struct of_device_id xgpio_of_match[] = { 372 { .compatible = "xlnx,xps-gpio-1.00.a", }, 373 { /* end of list */ }, 374 }; 375 376 MODULE_DEVICE_TABLE(of, xgpio_of_match); 377 378 static struct platform_driver xgpio_plat_driver = { 379 .probe = xgpio_probe, 380 .remove = xgpio_remove, 381 .driver = { 382 .name = "gpio-xilinx", 383 .of_match_table = xgpio_of_match, 384 }, 385 }; 386 387 static int __init xgpio_init(void) 388 { 389 return platform_driver_register(&xgpio_plat_driver); 390 } 391 392 subsys_initcall(xgpio_init); 393 394 static void __exit xgpio_exit(void) 395 { 396 platform_driver_unregister(&xgpio_plat_driver); 397 } 398 module_exit(xgpio_exit); 399 400 MODULE_AUTHOR("Xilinx, Inc."); 401 MODULE_DESCRIPTION("Xilinx GPIO driver"); 402 MODULE_LICENSE("GPL"); 403