1 /* 2 * Intel Whiskey Cove PMIC GPIO Driver 3 * 4 * This driver is written based on gpio-crystalcove.c 5 * 6 * Copyright (C) 2016 Intel Corporation. All rights reserved. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License version 10 * 2 as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 */ 17 18 #include <linux/bitops.h> 19 #include <linux/module.h> 20 #include <linux/interrupt.h> 21 #include <linux/gpio/driver.h> 22 #include <linux/mfd/intel_soc_pmic.h> 23 #include <linux/platform_device.h> 24 #include <linux/regmap.h> 25 #include <linux/seq_file.h> 26 27 /* 28 * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks: 29 * Bank 0: Pin 0 - 6 30 * Bank 1: Pin 7 - 10 31 * Bank 2: Pin 11 -12 32 * Each pin has one output control register and one input control register. 33 */ 34 #define BANK0_NR_PINS 7 35 #define BANK1_NR_PINS 4 36 #define BANK2_NR_PINS 2 37 #define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS) 38 #define WCOVE_VGPIO_NUM 94 39 /* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */ 40 #define GPIO_OUT_CTRL_BASE 0x4e44 41 /* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */ 42 #define GPIO_IN_CTRL_BASE 0x4e51 43 44 /* 45 * GPIO interrupts are organized in two groups: 46 * Group 0: Bank 0 pins (Pin 0 - 6) 47 * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12) 48 * Each group has two registers (one bit per pin): status and mask. 49 */ 50 #define GROUP0_NR_IRQS 7 51 #define GROUP1_NR_IRQS 6 52 #define IRQ_MASK_BASE 0x4e19 53 #define IRQ_STATUS_BASE 0x4e0b 54 #define GPIO_IRQ0_MASK GENMASK(6, 0) 55 #define GPIO_IRQ1_MASK GENMASK(5, 0) 56 #define UPDATE_IRQ_TYPE BIT(0) 57 #define UPDATE_IRQ_MASK BIT(1) 58 59 #define CTLI_INTCNT_DIS (0 << 1) 60 #define CTLI_INTCNT_NE (1 << 1) 61 #define CTLI_INTCNT_PE (2 << 1) 62 #define CTLI_INTCNT_BE (3 << 1) 63 64 #define CTLO_DIR_IN (0 << 5) 65 #define CTLO_DIR_OUT (1 << 5) 66 67 #define CTLO_DRV_MASK (1 << 4) 68 #define CTLO_DRV_OD (0 << 4) 69 #define CTLO_DRV_CMOS (1 << 4) 70 71 #define CTLO_DRV_REN (1 << 3) 72 73 #define CTLO_RVAL_2KDOWN (0 << 1) 74 #define CTLO_RVAL_2KUP (1 << 1) 75 #define CTLO_RVAL_50KDOWN (2 << 1) 76 #define CTLO_RVAL_50KUP (3 << 1) 77 78 #define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP) 79 #define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET) 80 81 enum ctrl_register { 82 CTRL_IN, 83 CTRL_OUT, 84 }; 85 86 /* 87 * struct wcove_gpio - Whiskey Cove GPIO controller 88 * @buslock: for bus lock/sync and unlock. 89 * @chip: the abstract gpio_chip structure. 90 * @dev: the gpio device 91 * @regmap: the regmap from the parent device. 92 * @regmap_irq_chip: the regmap of the gpio irq chip. 93 * @update: pending IRQ setting update, to be written to the chip upon unlock. 94 * @intcnt: the Interrupt Detect value to be written. 95 * @set_irq_mask: true if the IRQ mask needs to be set, false to clear. 96 */ 97 struct wcove_gpio { 98 struct mutex buslock; 99 struct gpio_chip chip; 100 struct device *dev; 101 struct regmap *regmap; 102 struct regmap_irq_chip_data *regmap_irq_chip; 103 int update; 104 int intcnt; 105 bool set_irq_mask; 106 }; 107 108 static inline unsigned int to_reg(int gpio, enum ctrl_register reg_type) 109 { 110 unsigned int reg; 111 112 if (gpio >= WCOVE_GPIO_NUM) 113 return -EOPNOTSUPP; 114 115 if (reg_type == CTRL_IN) 116 reg = GPIO_IN_CTRL_BASE + gpio; 117 else 118 reg = GPIO_OUT_CTRL_BASE + gpio; 119 120 return reg; 121 } 122 123 static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio) 124 { 125 unsigned int reg, mask; 126 127 if (gpio < GROUP0_NR_IRQS) { 128 reg = IRQ_MASK_BASE; 129 mask = BIT(gpio % GROUP0_NR_IRQS); 130 } else { 131 reg = IRQ_MASK_BASE + 1; 132 mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS); 133 } 134 135 if (wg->set_irq_mask) 136 regmap_update_bits(wg->regmap, reg, mask, mask); 137 else 138 regmap_update_bits(wg->regmap, reg, mask, 0); 139 } 140 141 static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio) 142 { 143 int reg = to_reg(gpio, CTRL_IN); 144 145 if (reg < 0) 146 return; 147 148 regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt); 149 } 150 151 static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio) 152 { 153 struct wcove_gpio *wg = gpiochip_get_data(chip); 154 int reg = to_reg(gpio, CTRL_OUT); 155 156 if (reg < 0) 157 return 0; 158 159 return regmap_write(wg->regmap, reg, CTLO_INPUT_SET); 160 } 161 162 static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio, 163 int value) 164 { 165 struct wcove_gpio *wg = gpiochip_get_data(chip); 166 int reg = to_reg(gpio, CTRL_OUT); 167 168 if (reg < 0) 169 return 0; 170 171 return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value); 172 } 173 174 static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio) 175 { 176 struct wcove_gpio *wg = gpiochip_get_data(chip); 177 unsigned int val; 178 int ret, reg = to_reg(gpio, CTRL_OUT); 179 180 if (reg < 0) 181 return 0; 182 183 ret = regmap_read(wg->regmap, reg, &val); 184 if (ret) 185 return ret; 186 187 return !(val & CTLO_DIR_OUT); 188 } 189 190 static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio) 191 { 192 struct wcove_gpio *wg = gpiochip_get_data(chip); 193 unsigned int val; 194 int ret, reg = to_reg(gpio, CTRL_IN); 195 196 if (reg < 0) 197 return 0; 198 199 ret = regmap_read(wg->regmap, reg, &val); 200 if (ret) 201 return ret; 202 203 return val & 0x1; 204 } 205 206 static void wcove_gpio_set(struct gpio_chip *chip, 207 unsigned int gpio, int value) 208 { 209 struct wcove_gpio *wg = gpiochip_get_data(chip); 210 int reg = to_reg(gpio, CTRL_OUT); 211 212 if (reg < 0) 213 return; 214 215 if (value) 216 regmap_update_bits(wg->regmap, reg, 1, 1); 217 else 218 regmap_update_bits(wg->regmap, reg, 1, 0); 219 } 220 221 static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio, 222 unsigned long config) 223 { 224 struct wcove_gpio *wg = gpiochip_get_data(chip); 225 int reg = to_reg(gpio, CTRL_OUT); 226 227 if (reg < 0) 228 return 0; 229 230 switch (pinconf_to_config_param(config)) { 231 case PIN_CONFIG_DRIVE_OPEN_DRAIN: 232 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, 233 CTLO_DRV_OD); 234 case PIN_CONFIG_DRIVE_PUSH_PULL: 235 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, 236 CTLO_DRV_CMOS); 237 default: 238 break; 239 } 240 241 return -ENOTSUPP; 242 } 243 244 static int wcove_irq_type(struct irq_data *data, unsigned int type) 245 { 246 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 247 struct wcove_gpio *wg = gpiochip_get_data(chip); 248 249 if (data->hwirq >= WCOVE_GPIO_NUM) 250 return 0; 251 252 switch (type) { 253 case IRQ_TYPE_NONE: 254 wg->intcnt = CTLI_INTCNT_DIS; 255 break; 256 case IRQ_TYPE_EDGE_BOTH: 257 wg->intcnt = CTLI_INTCNT_BE; 258 break; 259 case IRQ_TYPE_EDGE_RISING: 260 wg->intcnt = CTLI_INTCNT_PE; 261 break; 262 case IRQ_TYPE_EDGE_FALLING: 263 wg->intcnt = CTLI_INTCNT_NE; 264 break; 265 default: 266 return -EINVAL; 267 } 268 269 wg->update |= UPDATE_IRQ_TYPE; 270 271 return 0; 272 } 273 274 static void wcove_bus_lock(struct irq_data *data) 275 { 276 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 277 struct wcove_gpio *wg = gpiochip_get_data(chip); 278 279 mutex_lock(&wg->buslock); 280 } 281 282 static void wcove_bus_sync_unlock(struct irq_data *data) 283 { 284 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 285 struct wcove_gpio *wg = gpiochip_get_data(chip); 286 int gpio = data->hwirq; 287 288 if (wg->update & UPDATE_IRQ_TYPE) 289 wcove_update_irq_ctrl(wg, gpio); 290 if (wg->update & UPDATE_IRQ_MASK) 291 wcove_update_irq_mask(wg, gpio); 292 wg->update = 0; 293 294 mutex_unlock(&wg->buslock); 295 } 296 297 static void wcove_irq_unmask(struct irq_data *data) 298 { 299 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 300 struct wcove_gpio *wg = gpiochip_get_data(chip); 301 302 if (data->hwirq >= WCOVE_GPIO_NUM) 303 return; 304 305 wg->set_irq_mask = false; 306 wg->update |= UPDATE_IRQ_MASK; 307 } 308 309 static void wcove_irq_mask(struct irq_data *data) 310 { 311 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 312 struct wcove_gpio *wg = gpiochip_get_data(chip); 313 314 if (data->hwirq >= WCOVE_GPIO_NUM) 315 return; 316 317 wg->set_irq_mask = true; 318 wg->update |= UPDATE_IRQ_MASK; 319 } 320 321 static struct irq_chip wcove_irqchip = { 322 .name = "Whiskey Cove", 323 .irq_mask = wcove_irq_mask, 324 .irq_unmask = wcove_irq_unmask, 325 .irq_set_type = wcove_irq_type, 326 .irq_bus_lock = wcove_bus_lock, 327 .irq_bus_sync_unlock = wcove_bus_sync_unlock, 328 }; 329 330 static irqreturn_t wcove_gpio_irq_handler(int irq, void *data) 331 { 332 struct wcove_gpio *wg = (struct wcove_gpio *)data; 333 unsigned int pending, virq, gpio, mask, offset; 334 u8 p[2]; 335 336 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { 337 dev_err(wg->dev, "Failed to read irq status register\n"); 338 return IRQ_NONE; 339 } 340 341 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); 342 if (!pending) 343 return IRQ_NONE; 344 345 /* Iterate until no interrupt is pending */ 346 while (pending) { 347 /* One iteration is for all pending bits */ 348 for_each_set_bit(gpio, (const unsigned long *)&pending, 349 WCOVE_GPIO_NUM) { 350 offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0; 351 mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) : 352 BIT(gpio); 353 virq = irq_find_mapping(wg->chip.irq.domain, gpio); 354 handle_nested_irq(virq); 355 regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset, 356 mask, mask); 357 } 358 359 /* Next iteration */ 360 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { 361 dev_err(wg->dev, "Failed to read irq status\n"); 362 break; 363 } 364 365 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); 366 } 367 368 return IRQ_HANDLED; 369 } 370 371 static void wcove_gpio_dbg_show(struct seq_file *s, 372 struct gpio_chip *chip) 373 { 374 unsigned int ctlo, ctli, irq_mask, irq_status; 375 struct wcove_gpio *wg = gpiochip_get_data(chip); 376 int gpio, offset, group, ret = 0; 377 378 for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) { 379 group = gpio < GROUP0_NR_IRQS ? 0 : 1; 380 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo); 381 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli); 382 ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group, 383 &irq_mask); 384 ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group, 385 &irq_status); 386 if (ret) { 387 pr_err("Failed to read registers: ctrl out/in or irq status/mask\n"); 388 break; 389 } 390 391 offset = gpio % 8; 392 seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n", 393 gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ", 394 ctli & 0x1 ? "hi" : "lo", 395 ctli & CTLI_INTCNT_NE ? "fall" : " ", 396 ctli & CTLI_INTCNT_PE ? "rise" : " ", 397 ctlo, 398 irq_mask & BIT(offset) ? "mask " : "unmask", 399 irq_status & BIT(offset) ? "pending" : " "); 400 } 401 } 402 403 static int wcove_gpio_probe(struct platform_device *pdev) 404 { 405 struct intel_soc_pmic *pmic; 406 struct wcove_gpio *wg; 407 int virq, ret, irq; 408 struct device *dev; 409 410 /* 411 * This gpio platform device is created by a mfd device (see 412 * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information 413 * shared by all sub-devices created by the mfd device, the regmap 414 * pointer for instance, is stored as driver data of the mfd device 415 * driver. 416 */ 417 pmic = dev_get_drvdata(pdev->dev.parent); 418 if (!pmic) 419 return -ENODEV; 420 421 irq = platform_get_irq(pdev, 0); 422 if (irq < 0) 423 return irq; 424 425 dev = &pdev->dev; 426 427 wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL); 428 if (!wg) 429 return -ENOMEM; 430 431 wg->regmap_irq_chip = pmic->irq_chip_data; 432 433 platform_set_drvdata(pdev, wg); 434 435 mutex_init(&wg->buslock); 436 wg->chip.label = KBUILD_MODNAME; 437 wg->chip.direction_input = wcove_gpio_dir_in; 438 wg->chip.direction_output = wcove_gpio_dir_out; 439 wg->chip.get_direction = wcove_gpio_get_direction; 440 wg->chip.get = wcove_gpio_get; 441 wg->chip.set = wcove_gpio_set; 442 wg->chip.set_config = wcove_gpio_set_config, 443 wg->chip.base = -1; 444 wg->chip.ngpio = WCOVE_VGPIO_NUM; 445 wg->chip.can_sleep = true; 446 wg->chip.parent = pdev->dev.parent; 447 wg->chip.dbg_show = wcove_gpio_dbg_show; 448 wg->dev = dev; 449 wg->regmap = pmic->regmap; 450 451 ret = devm_gpiochip_add_data(dev, &wg->chip, wg); 452 if (ret) { 453 dev_err(dev, "Failed to add gpiochip: %d\n", ret); 454 return ret; 455 } 456 457 ret = gpiochip_irqchip_add_nested(&wg->chip, &wcove_irqchip, 0, 458 handle_simple_irq, IRQ_TYPE_NONE); 459 if (ret) { 460 dev_err(dev, "Failed to add irqchip: %d\n", ret); 461 return ret; 462 } 463 464 virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq); 465 if (virq < 0) { 466 dev_err(dev, "Failed to get virq by irq %d\n", irq); 467 return virq; 468 } 469 470 ret = devm_request_threaded_irq(dev, virq, NULL, 471 wcove_gpio_irq_handler, IRQF_ONESHOT, pdev->name, wg); 472 if (ret) { 473 dev_err(dev, "Failed to request irq %d\n", virq); 474 return ret; 475 } 476 477 gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq); 478 479 /* Enable GPIO0 interrupts */ 480 ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK, 481 0x00); 482 if (ret) 483 return ret; 484 485 /* Enable GPIO1 interrupts */ 486 ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK, 487 0x00); 488 if (ret) 489 return ret; 490 491 return 0; 492 } 493 494 /* 495 * Whiskey Cove PMIC itself is a analog device(but with digital control 496 * interface) providing power management support for other devices in 497 * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver. 498 */ 499 static struct platform_driver wcove_gpio_driver = { 500 .driver = { 501 .name = "bxt_wcove_gpio", 502 }, 503 .probe = wcove_gpio_probe, 504 }; 505 506 module_platform_driver(wcove_gpio_driver); 507 508 MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>"); 509 MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>"); 510 MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver"); 511 MODULE_LICENSE("GPL v2"); 512 MODULE_ALIAS("platform:bxt_wcove_gpio"); 513