1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Intel Whiskey Cove PMIC GPIO Driver 4 * 5 * This driver is written based on gpio-crystalcove.c 6 * 7 * Copyright (C) 2016 Intel Corporation. All rights reserved. 8 */ 9 10 #include <linux/bitops.h> 11 #include <linux/gpio/driver.h> 12 #include <linux/interrupt.h> 13 #include <linux/mfd/intel_soc_pmic.h> 14 #include <linux/module.h> 15 #include <linux/platform_device.h> 16 #include <linux/regmap.h> 17 #include <linux/seq_file.h> 18 19 /* 20 * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks: 21 * Bank 0: Pin 0 - 6 22 * Bank 1: Pin 7 - 10 23 * Bank 2: Pin 11 - 12 24 * Each pin has one output control register and one input control register. 25 */ 26 #define BANK0_NR_PINS 7 27 #define BANK1_NR_PINS 4 28 #define BANK2_NR_PINS 2 29 #define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS) 30 #define WCOVE_VGPIO_NUM 94 31 /* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */ 32 #define GPIO_OUT_CTRL_BASE 0x4e44 33 /* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */ 34 #define GPIO_IN_CTRL_BASE 0x4e51 35 36 /* 37 * GPIO interrupts are organized in two groups: 38 * Group 0: Bank 0 pins (Pin 0 - 6) 39 * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12) 40 * Each group has two registers (one bit per pin): status and mask. 41 */ 42 #define GROUP0_NR_IRQS 7 43 #define GROUP1_NR_IRQS 6 44 #define IRQ_MASK_BASE 0x4e19 45 #define IRQ_STATUS_BASE 0x4e0b 46 #define GPIO_IRQ0_MASK GENMASK(6, 0) 47 #define GPIO_IRQ1_MASK GENMASK(5, 0) 48 #define UPDATE_IRQ_TYPE BIT(0) 49 #define UPDATE_IRQ_MASK BIT(1) 50 51 #define CTLI_INTCNT_DIS (0 << 1) 52 #define CTLI_INTCNT_NE (1 << 1) 53 #define CTLI_INTCNT_PE (2 << 1) 54 #define CTLI_INTCNT_BE (3 << 1) 55 56 #define CTLO_DIR_IN (0 << 5) 57 #define CTLO_DIR_OUT (1 << 5) 58 59 #define CTLO_DRV_MASK (1 << 4) 60 #define CTLO_DRV_OD (0 << 4) 61 #define CTLO_DRV_CMOS (1 << 4) 62 63 #define CTLO_DRV_REN (1 << 3) 64 65 #define CTLO_RVAL_2KDOWN (0 << 1) 66 #define CTLO_RVAL_2KUP (1 << 1) 67 #define CTLO_RVAL_50KDOWN (2 << 1) 68 #define CTLO_RVAL_50KUP (3 << 1) 69 70 #define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP) 71 #define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET) 72 73 enum ctrl_register { 74 CTRL_IN, 75 CTRL_OUT, 76 IRQ_STATUS, 77 IRQ_MASK, 78 }; 79 80 /* 81 * struct wcove_gpio - Whiskey Cove GPIO controller 82 * @buslock: for bus lock/sync and unlock. 83 * @chip: the abstract gpio_chip structure. 84 * @dev: the gpio device 85 * @regmap: the regmap from the parent device. 86 * @regmap_irq_chip: the regmap of the gpio irq chip. 87 * @update: pending IRQ setting update, to be written to the chip upon unlock. 88 * @intcnt: the Interrupt Detect value to be written. 89 * @set_irq_mask: true if the IRQ mask needs to be set, false to clear. 90 */ 91 struct wcove_gpio { 92 struct mutex buslock; 93 struct gpio_chip chip; 94 struct device *dev; 95 struct regmap *regmap; 96 struct regmap_irq_chip_data *regmap_irq_chip; 97 int update; 98 int intcnt; 99 bool set_irq_mask; 100 }; 101 102 static inline int to_reg(int gpio, enum ctrl_register type) 103 { 104 unsigned int reg = type == CTRL_IN ? GPIO_IN_CTRL_BASE : GPIO_OUT_CTRL_BASE; 105 106 if (gpio >= WCOVE_GPIO_NUM) 107 return -EOPNOTSUPP; 108 109 return reg + gpio; 110 } 111 112 static inline int to_ireg(int gpio, enum ctrl_register type, unsigned int *mask) 113 { 114 unsigned int reg = type == IRQ_STATUS ? IRQ_STATUS_BASE : IRQ_MASK_BASE; 115 116 if (gpio < GROUP0_NR_IRQS) { 117 reg += 0; 118 *mask = BIT(gpio); 119 } else { 120 reg += 1; 121 *mask = BIT(gpio - GROUP0_NR_IRQS); 122 } 123 124 return reg; 125 } 126 127 static void wcove_update_irq_mask(struct wcove_gpio *wg, irq_hw_number_t gpio) 128 { 129 unsigned int mask, reg = to_ireg(gpio, IRQ_MASK, &mask); 130 131 if (wg->set_irq_mask) 132 regmap_set_bits(wg->regmap, reg, mask); 133 else 134 regmap_clear_bits(wg->regmap, reg, mask); 135 } 136 137 static void wcove_update_irq_ctrl(struct wcove_gpio *wg, irq_hw_number_t gpio) 138 { 139 int reg = to_reg(gpio, CTRL_IN); 140 141 regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt); 142 } 143 144 static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio) 145 { 146 struct wcove_gpio *wg = gpiochip_get_data(chip); 147 int reg = to_reg(gpio, CTRL_OUT); 148 149 if (reg < 0) 150 return 0; 151 152 return regmap_write(wg->regmap, reg, CTLO_INPUT_SET); 153 } 154 155 static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio, 156 int value) 157 { 158 struct wcove_gpio *wg = gpiochip_get_data(chip); 159 int reg = to_reg(gpio, CTRL_OUT); 160 161 if (reg < 0) 162 return 0; 163 164 return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value); 165 } 166 167 static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio) 168 { 169 struct wcove_gpio *wg = gpiochip_get_data(chip); 170 unsigned int val; 171 int ret, reg = to_reg(gpio, CTRL_OUT); 172 173 if (reg < 0) 174 return GPIO_LINE_DIRECTION_OUT; 175 176 ret = regmap_read(wg->regmap, reg, &val); 177 if (ret) 178 return ret; 179 180 if (val & CTLO_DIR_OUT) 181 return GPIO_LINE_DIRECTION_OUT; 182 183 return GPIO_LINE_DIRECTION_IN; 184 } 185 186 static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio) 187 { 188 struct wcove_gpio *wg = gpiochip_get_data(chip); 189 unsigned int val; 190 int ret, reg = to_reg(gpio, CTRL_IN); 191 192 if (reg < 0) 193 return 0; 194 195 ret = regmap_read(wg->regmap, reg, &val); 196 if (ret) 197 return ret; 198 199 return val & 0x1; 200 } 201 202 static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value) 203 { 204 struct wcove_gpio *wg = gpiochip_get_data(chip); 205 int reg = to_reg(gpio, CTRL_OUT); 206 207 if (reg < 0) 208 return; 209 210 if (value) 211 regmap_set_bits(wg->regmap, reg, 1); 212 else 213 regmap_clear_bits(wg->regmap, reg, 1); 214 } 215 216 static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio, 217 unsigned long config) 218 { 219 struct wcove_gpio *wg = gpiochip_get_data(chip); 220 int reg = to_reg(gpio, CTRL_OUT); 221 222 if (reg < 0) 223 return 0; 224 225 switch (pinconf_to_config_param(config)) { 226 case PIN_CONFIG_DRIVE_OPEN_DRAIN: 227 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, 228 CTLO_DRV_OD); 229 case PIN_CONFIG_DRIVE_PUSH_PULL: 230 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, 231 CTLO_DRV_CMOS); 232 default: 233 break; 234 } 235 236 return -ENOTSUPP; 237 } 238 239 static int wcove_irq_type(struct irq_data *data, unsigned int type) 240 { 241 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 242 struct wcove_gpio *wg = gpiochip_get_data(chip); 243 irq_hw_number_t gpio = irqd_to_hwirq(data); 244 245 if (gpio >= WCOVE_GPIO_NUM) 246 return 0; 247 248 switch (type) { 249 case IRQ_TYPE_NONE: 250 wg->intcnt = CTLI_INTCNT_DIS; 251 break; 252 case IRQ_TYPE_EDGE_BOTH: 253 wg->intcnt = CTLI_INTCNT_BE; 254 break; 255 case IRQ_TYPE_EDGE_RISING: 256 wg->intcnt = CTLI_INTCNT_PE; 257 break; 258 case IRQ_TYPE_EDGE_FALLING: 259 wg->intcnt = CTLI_INTCNT_NE; 260 break; 261 default: 262 return -EINVAL; 263 } 264 265 wg->update |= UPDATE_IRQ_TYPE; 266 267 return 0; 268 } 269 270 static void wcove_bus_lock(struct irq_data *data) 271 { 272 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 273 struct wcove_gpio *wg = gpiochip_get_data(chip); 274 275 mutex_lock(&wg->buslock); 276 } 277 278 static void wcove_bus_sync_unlock(struct irq_data *data) 279 { 280 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 281 struct wcove_gpio *wg = gpiochip_get_data(chip); 282 irq_hw_number_t gpio = irqd_to_hwirq(data); 283 284 if (wg->update & UPDATE_IRQ_TYPE) 285 wcove_update_irq_ctrl(wg, gpio); 286 if (wg->update & UPDATE_IRQ_MASK) 287 wcove_update_irq_mask(wg, gpio); 288 wg->update = 0; 289 290 mutex_unlock(&wg->buslock); 291 } 292 293 static void wcove_irq_unmask(struct irq_data *data) 294 { 295 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 296 struct wcove_gpio *wg = gpiochip_get_data(chip); 297 irq_hw_number_t gpio = irqd_to_hwirq(data); 298 299 if (gpio >= WCOVE_GPIO_NUM) 300 return; 301 302 wg->set_irq_mask = false; 303 wg->update |= UPDATE_IRQ_MASK; 304 } 305 306 static void wcove_irq_mask(struct irq_data *data) 307 { 308 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 309 struct wcove_gpio *wg = gpiochip_get_data(chip); 310 irq_hw_number_t gpio = irqd_to_hwirq(data); 311 312 if (gpio >= WCOVE_GPIO_NUM) 313 return; 314 315 wg->set_irq_mask = true; 316 wg->update |= UPDATE_IRQ_MASK; 317 } 318 319 static struct irq_chip wcove_irqchip = { 320 .name = "Whiskey Cove", 321 .irq_mask = wcove_irq_mask, 322 .irq_unmask = wcove_irq_unmask, 323 .irq_set_type = wcove_irq_type, 324 .irq_bus_lock = wcove_bus_lock, 325 .irq_bus_sync_unlock = wcove_bus_sync_unlock, 326 }; 327 328 static irqreturn_t wcove_gpio_irq_handler(int irq, void *data) 329 { 330 struct wcove_gpio *wg = (struct wcove_gpio *)data; 331 unsigned int virq, gpio; 332 unsigned long pending; 333 u8 p[2]; 334 335 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { 336 dev_err(wg->dev, "Failed to read irq status register\n"); 337 return IRQ_NONE; 338 } 339 340 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); 341 if (!pending) 342 return IRQ_NONE; 343 344 /* Iterate until no interrupt is pending */ 345 while (pending) { 346 /* One iteration is for all pending bits */ 347 for_each_set_bit(gpio, &pending, WCOVE_GPIO_NUM) { 348 unsigned int mask, reg = to_ireg(gpio, IRQ_STATUS, &mask); 349 350 virq = irq_find_mapping(wg->chip.irq.domain, gpio); 351 handle_nested_irq(virq); 352 regmap_set_bits(wg->regmap, reg, mask); 353 } 354 355 /* Next iteration */ 356 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { 357 dev_err(wg->dev, "Failed to read irq status\n"); 358 break; 359 } 360 361 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); 362 } 363 364 return IRQ_HANDLED; 365 } 366 367 static void wcove_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) 368 { 369 unsigned int ctlo, ctli, irq_mask, irq_status; 370 struct wcove_gpio *wg = gpiochip_get_data(chip); 371 int gpio, mask, ret = 0; 372 373 for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) { 374 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo); 375 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli); 376 if (ret) { 377 dev_err(wg->dev, "Failed to read registers: CTRL out/in\n"); 378 break; 379 } 380 381 ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_MASK, &mask), &irq_mask); 382 ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_STATUS, &mask), &irq_status); 383 if (ret) { 384 dev_err(wg->dev, "Failed to read registers: IRQ status/mask\n"); 385 break; 386 } 387 388 seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n", 389 gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ", 390 ctli & 0x1 ? "hi" : "lo", 391 ctli & CTLI_INTCNT_NE ? "fall" : " ", 392 ctli & CTLI_INTCNT_PE ? "rise" : " ", 393 ctlo, 394 irq_mask & mask ? "mask " : "unmask", 395 irq_status & mask ? "pending" : " "); 396 } 397 } 398 399 static int wcove_gpio_probe(struct platform_device *pdev) 400 { 401 struct intel_soc_pmic *pmic; 402 struct wcove_gpio *wg; 403 int virq, ret, irq; 404 struct device *dev; 405 struct gpio_irq_chip *girq; 406 407 /* 408 * This gpio platform device is created by a mfd device (see 409 * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information 410 * shared by all sub-devices created by the mfd device, the regmap 411 * pointer for instance, is stored as driver data of the mfd device 412 * driver. 413 */ 414 pmic = dev_get_drvdata(pdev->dev.parent); 415 if (!pmic) 416 return -ENODEV; 417 418 irq = platform_get_irq(pdev, 0); 419 if (irq < 0) 420 return irq; 421 422 dev = &pdev->dev; 423 424 wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL); 425 if (!wg) 426 return -ENOMEM; 427 428 wg->regmap_irq_chip = pmic->irq_chip_data; 429 430 platform_set_drvdata(pdev, wg); 431 432 mutex_init(&wg->buslock); 433 wg->chip.label = KBUILD_MODNAME; 434 wg->chip.direction_input = wcove_gpio_dir_in; 435 wg->chip.direction_output = wcove_gpio_dir_out; 436 wg->chip.get_direction = wcove_gpio_get_direction; 437 wg->chip.get = wcove_gpio_get; 438 wg->chip.set = wcove_gpio_set; 439 wg->chip.set_config = wcove_gpio_set_config; 440 wg->chip.base = -1; 441 wg->chip.ngpio = WCOVE_VGPIO_NUM; 442 wg->chip.can_sleep = true; 443 wg->chip.parent = pdev->dev.parent; 444 wg->chip.dbg_show = wcove_gpio_dbg_show; 445 wg->dev = dev; 446 wg->regmap = pmic->regmap; 447 448 virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq); 449 if (virq < 0) { 450 dev_err(dev, "Failed to get virq by irq %d\n", irq); 451 return virq; 452 } 453 454 girq = &wg->chip.irq; 455 girq->chip = &wcove_irqchip; 456 /* This will let us handle the parent IRQ in the driver */ 457 girq->parent_handler = NULL; 458 girq->num_parents = 0; 459 girq->parents = NULL; 460 girq->default_type = IRQ_TYPE_NONE; 461 girq->handler = handle_simple_irq; 462 girq->threaded = true; 463 464 ret = devm_request_threaded_irq(dev, virq, NULL, wcove_gpio_irq_handler, 465 IRQF_ONESHOT, pdev->name, wg); 466 if (ret) { 467 dev_err(dev, "Failed to request irq %d\n", virq); 468 return ret; 469 } 470 471 ret = devm_gpiochip_add_data(dev, &wg->chip, wg); 472 if (ret) { 473 dev_err(dev, "Failed to add gpiochip: %d\n", ret); 474 return ret; 475 } 476 477 /* Enable GPIO0 interrupts */ 478 ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 0, GPIO_IRQ0_MASK); 479 if (ret) 480 return ret; 481 482 /* Enable GPIO1 interrupts */ 483 ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK); 484 if (ret) 485 return ret; 486 487 return 0; 488 } 489 490 /* 491 * Whiskey Cove PMIC itself is a analog device(but with digital control 492 * interface) providing power management support for other devices in 493 * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver. 494 */ 495 static struct platform_driver wcove_gpio_driver = { 496 .driver = { 497 .name = "bxt_wcove_gpio", 498 }, 499 .probe = wcove_gpio_probe, 500 }; 501 502 module_platform_driver(wcove_gpio_driver); 503 504 MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>"); 505 MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>"); 506 MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver"); 507 MODULE_LICENSE("GPL v2"); 508 MODULE_ALIAS("platform:bxt_wcove_gpio"); 509