xref: /openbmc/linux/drivers/gpio/gpio-syscon.c (revision 03638e62)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  SYSCON GPIO driver
4  *
5  *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
6  */
7 
8 #include <linux/err.h>
9 #include <linux/gpio/driver.h>
10 #include <linux/module.h>
11 #include <linux/of.h>
12 #include <linux/of_device.h>
13 #include <linux/platform_device.h>
14 #include <linux/regmap.h>
15 #include <linux/mfd/syscon.h>
16 
17 #define GPIO_SYSCON_FEAT_IN	BIT(0)
18 #define GPIO_SYSCON_FEAT_OUT	BIT(1)
19 #define GPIO_SYSCON_FEAT_DIR	BIT(2)
20 
21 /* SYSCON driver is designed to use 32-bit wide registers */
22 #define SYSCON_REG_SIZE		(4)
23 #define SYSCON_REG_BITS		(SYSCON_REG_SIZE * 8)
24 
25 /**
26  * struct syscon_gpio_data - Configuration for the device.
27  * compatible:		SYSCON driver compatible string.
28  * flags:		Set of GPIO_SYSCON_FEAT_ flags:
29  *			GPIO_SYSCON_FEAT_IN:	GPIOs supports input,
30  *			GPIO_SYSCON_FEAT_OUT:	GPIOs supports output,
31  *			GPIO_SYSCON_FEAT_DIR:	GPIOs supports switch direction.
32  * bit_count:		Number of bits used as GPIOs.
33  * dat_bit_offset:	Offset (in bits) to the first GPIO bit.
34  * dir_bit_offset:	Optional offset (in bits) to the first bit to switch
35  *			GPIO direction (Used with GPIO_SYSCON_FEAT_DIR flag).
36  * set:		HW specific callback to assigns output value
37  *			for signal "offset"
38  */
39 
40 struct syscon_gpio_data {
41 	const char	*compatible;
42 	unsigned int	flags;
43 	unsigned int	bit_count;
44 	unsigned int	dat_bit_offset;
45 	unsigned int	dir_bit_offset;
46 	void		(*set)(struct gpio_chip *chip,
47 			       unsigned offset, int value);
48 };
49 
50 struct syscon_gpio_priv {
51 	struct gpio_chip		chip;
52 	struct regmap			*syscon;
53 	const struct syscon_gpio_data	*data;
54 	u32				dreg_offset;
55 	u32				dir_reg_offset;
56 };
57 
58 static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)
59 {
60 	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
61 	unsigned int val, offs;
62 	int ret;
63 
64 	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
65 
66 	ret = regmap_read(priv->syscon,
67 			  (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val);
68 	if (ret)
69 		return ret;
70 
71 	return !!(val & BIT(offs % SYSCON_REG_BITS));
72 }
73 
74 static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
75 {
76 	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
77 	unsigned int offs;
78 
79 	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
80 
81 	regmap_update_bits(priv->syscon,
82 			   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
83 			   BIT(offs % SYSCON_REG_BITS),
84 			   val ? BIT(offs % SYSCON_REG_BITS) : 0);
85 }
86 
87 static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
88 {
89 	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
90 
91 	if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
92 		unsigned int offs;
93 
94 		offs = priv->dir_reg_offset +
95 		       priv->data->dir_bit_offset + offset;
96 
97 		regmap_update_bits(priv->syscon,
98 				   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
99 				   BIT(offs % SYSCON_REG_BITS), 0);
100 	}
101 
102 	return 0;
103 }
104 
105 static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
106 {
107 	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
108 
109 	if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
110 		unsigned int offs;
111 
112 		offs = priv->dir_reg_offset +
113 		       priv->data->dir_bit_offset + offset;
114 
115 		regmap_update_bits(priv->syscon,
116 				   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
117 				   BIT(offs % SYSCON_REG_BITS),
118 				   BIT(offs % SYSCON_REG_BITS));
119 	}
120 
121 	chip->set(chip, offset, val);
122 
123 	return 0;
124 }
125 
126 static const struct syscon_gpio_data clps711x_mctrl_gpio = {
127 	/* ARM CLPS711X SYSFLG1 Bits 8-10 */
128 	.compatible	= "cirrus,ep7209-syscon1",
129 	.flags		= GPIO_SYSCON_FEAT_IN,
130 	.bit_count	= 3,
131 	.dat_bit_offset	= 0x40 * 8 + 8,
132 };
133 
134 static void rockchip_gpio_set(struct gpio_chip *chip, unsigned int offset,
135 			      int val)
136 {
137 	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
138 	unsigned int offs;
139 	u8 bit;
140 	u32 data;
141 	int ret;
142 
143 	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
144 	bit = offs % SYSCON_REG_BITS;
145 	data = (val ? BIT(bit) : 0) | BIT(bit + 16);
146 	ret = regmap_write(priv->syscon,
147 			   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
148 			   data);
149 	if (ret < 0)
150 		dev_err(chip->parent, "gpio write failed ret(%d)\n", ret);
151 }
152 
153 static const struct syscon_gpio_data rockchip_rk3328_gpio_mute = {
154 	/* RK3328 GPIO_MUTE is an output only pin at GRF_SOC_CON10[1] */
155 	.flags		= GPIO_SYSCON_FEAT_OUT,
156 	.bit_count	= 1,
157 	.dat_bit_offset = 0x0428 * 8 + 1,
158 	.set		= rockchip_gpio_set,
159 };
160 
161 #define KEYSTONE_LOCK_BIT BIT(0)
162 
163 static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
164 {
165 	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
166 	unsigned int offs;
167 	int ret;
168 
169 	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
170 
171 	if (!val)
172 		return;
173 
174 	ret = regmap_update_bits(
175 			priv->syscon,
176 			(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
177 			BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT,
178 			BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT);
179 	if (ret < 0)
180 		dev_err(chip->parent, "gpio write failed ret(%d)\n", ret);
181 }
182 
183 static const struct syscon_gpio_data keystone_dsp_gpio = {
184 	/* ARM Keystone 2 */
185 	.compatible	= NULL,
186 	.flags		= GPIO_SYSCON_FEAT_OUT,
187 	.bit_count	= 28,
188 	.dat_bit_offset	= 4,
189 	.set		= keystone_gpio_set,
190 };
191 
192 static const struct of_device_id syscon_gpio_ids[] = {
193 	{
194 		.compatible	= "cirrus,ep7209-mctrl-gpio",
195 		.data		= &clps711x_mctrl_gpio,
196 	},
197 	{
198 		.compatible	= "ti,keystone-dsp-gpio",
199 		.data		= &keystone_dsp_gpio,
200 	},
201 	{
202 		.compatible	= "rockchip,rk3328-grf-gpio",
203 		.data		= &rockchip_rk3328_gpio_mute,
204 	},
205 	{ }
206 };
207 MODULE_DEVICE_TABLE(of, syscon_gpio_ids);
208 
209 static int syscon_gpio_probe(struct platform_device *pdev)
210 {
211 	struct device *dev = &pdev->dev;
212 	struct syscon_gpio_priv *priv;
213 	struct device_node *np = dev->of_node;
214 	int ret;
215 
216 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
217 	if (!priv)
218 		return -ENOMEM;
219 
220 	priv->data = of_device_get_match_data(dev);
221 
222 	if (priv->data->compatible) {
223 		priv->syscon = syscon_regmap_lookup_by_compatible(
224 					priv->data->compatible);
225 		if (IS_ERR(priv->syscon))
226 			return PTR_ERR(priv->syscon);
227 	} else {
228 		priv->syscon =
229 			syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev");
230 		if (IS_ERR(priv->syscon) && np->parent)
231 			priv->syscon = syscon_node_to_regmap(np->parent);
232 		if (IS_ERR(priv->syscon))
233 			return PTR_ERR(priv->syscon);
234 
235 		ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
236 						 &priv->dreg_offset);
237 		if (ret)
238 			dev_err(dev, "can't read the data register offset!\n");
239 
240 		priv->dreg_offset <<= 3;
241 
242 		ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
243 						 &priv->dir_reg_offset);
244 		if (ret)
245 			dev_dbg(dev, "can't read the dir register offset!\n");
246 
247 		priv->dir_reg_offset <<= 3;
248 	}
249 
250 	priv->chip.parent = dev;
251 	priv->chip.owner = THIS_MODULE;
252 	priv->chip.label = dev_name(dev);
253 	priv->chip.base = -1;
254 	priv->chip.ngpio = priv->data->bit_count;
255 	priv->chip.get = syscon_gpio_get;
256 	if (priv->data->flags & GPIO_SYSCON_FEAT_IN)
257 		priv->chip.direction_input = syscon_gpio_dir_in;
258 	if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) {
259 		priv->chip.set = priv->data->set ? : syscon_gpio_set;
260 		priv->chip.direction_output = syscon_gpio_dir_out;
261 	}
262 
263 	platform_set_drvdata(pdev, priv);
264 
265 	return devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv);
266 }
267 
268 static struct platform_driver syscon_gpio_driver = {
269 	.driver	= {
270 		.name		= "gpio-syscon",
271 		.of_match_table	= syscon_gpio_ids,
272 	},
273 	.probe	= syscon_gpio_probe,
274 };
275 module_platform_driver(syscon_gpio_driver);
276 
277 MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
278 MODULE_DESCRIPTION("SYSCON GPIO driver");
279 MODULE_LICENSE("GPL");
280