1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * 4 * Copyright (C) 2012 John Crispin <john@phrozen.org> 5 */ 6 7 #include <linux/slab.h> 8 #include <linux/init.h> 9 #include <linux/module.h> 10 #include <linux/types.h> 11 #include <linux/of_platform.h> 12 #include <linux/mutex.h> 13 #include <linux/gpio/driver.h> 14 #include <linux/io.h> 15 #include <linux/clk.h> 16 #include <linux/err.h> 17 18 /* 19 * The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a 20 * peripheral controller used to drive external shift register cascades. At most 21 * 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem 22 * to drive the 2 LSBs of the cascade automatically. 23 */ 24 25 /* control register 0 */ 26 #define XWAY_STP_CON0 0x00 27 /* control register 1 */ 28 #define XWAY_STP_CON1 0x04 29 /* data register 0 */ 30 #define XWAY_STP_CPU0 0x08 31 /* data register 1 */ 32 #define XWAY_STP_CPU1 0x0C 33 /* access register */ 34 #define XWAY_STP_AR 0x10 35 36 /* software or hardware update select bit */ 37 #define XWAY_STP_CON_SWU BIT(31) 38 39 /* automatic update rates */ 40 #define XWAY_STP_2HZ 0 41 #define XWAY_STP_4HZ BIT(23) 42 #define XWAY_STP_8HZ BIT(24) 43 #define XWAY_STP_10HZ (BIT(24) | BIT(23)) 44 #define XWAY_STP_SPEED_MASK (BIT(23) | BIT(24) | BIT(25) | BIT(26) | BIT(27)) 45 46 #define XWAY_STP_FPIS_VALUE BIT(21) 47 #define XWAY_STP_FPIS_MASK (BIT(20) | BIT(21)) 48 49 /* clock source for automatic update */ 50 #define XWAY_STP_UPD_FPI BIT(31) 51 #define XWAY_STP_UPD_MASK (BIT(31) | BIT(30)) 52 53 /* let the adsl core drive the 2 LSBs */ 54 #define XWAY_STP_ADSL_SHIFT 24 55 #define XWAY_STP_ADSL_MASK 0x3 56 57 /* 2 groups of 3 bits can be driven by the phys */ 58 #define XWAY_STP_PHY_MASK 0x7 59 #define XWAY_STP_PHY1_SHIFT 27 60 #define XWAY_STP_PHY2_SHIFT 3 61 #define XWAY_STP_PHY3_SHIFT 6 62 #define XWAY_STP_PHY4_SHIFT 15 63 64 /* STP has 3 groups of 8 bits */ 65 #define XWAY_STP_GROUP0 BIT(0) 66 #define XWAY_STP_GROUP1 BIT(1) 67 #define XWAY_STP_GROUP2 BIT(2) 68 #define XWAY_STP_GROUP_MASK (0x7) 69 70 /* Edge configuration bits */ 71 #define XWAY_STP_FALLING BIT(26) 72 #define XWAY_STP_EDGE_MASK BIT(26) 73 74 #define xway_stp_r32(m, reg) __raw_readl(m + reg) 75 #define xway_stp_w32(m, val, reg) __raw_writel(val, m + reg) 76 #define xway_stp_w32_mask(m, clear, set, reg) \ 77 xway_stp_w32(m, (xway_stp_r32(m, reg) & ~(clear)) | (set), reg) 78 79 struct xway_stp { 80 struct gpio_chip gc; 81 void __iomem *virt; 82 u32 edge; /* rising or falling edge triggered shift register */ 83 u32 shadow; /* shadow the shift registers state */ 84 u8 groups; /* we can drive 1-3 groups of 8bit each */ 85 u8 dsl; /* the 2 LSBs can be driven by the dsl core */ 86 u8 phy1; /* 3 bits can be driven by phy1 */ 87 u8 phy2; /* 3 bits can be driven by phy2 */ 88 u8 phy3; /* 3 bits can be driven by phy3 */ 89 u8 phy4; /* 3 bits can be driven by phy4 */ 90 u8 reserved; /* mask out the hw driven bits in gpio_request */ 91 }; 92 93 /** 94 * xway_stp_get() - gpio_chip->get - get gpios. 95 * @gc: Pointer to gpio_chip device structure. 96 * @gpio: GPIO signal number. 97 * 98 * Gets the shadow value. 99 */ 100 static int xway_stp_get(struct gpio_chip *gc, unsigned int gpio) 101 { 102 struct xway_stp *chip = gpiochip_get_data(gc); 103 104 return (xway_stp_r32(chip->virt, XWAY_STP_CPU0) & BIT(gpio)); 105 } 106 107 /** 108 * xway_stp_set() - gpio_chip->set - set gpios. 109 * @gc: Pointer to gpio_chip device structure. 110 * @gpio: GPIO signal number. 111 * @val: Value to be written to specified signal. 112 * 113 * Set the shadow value and call ltq_ebu_apply. 114 */ 115 static void xway_stp_set(struct gpio_chip *gc, unsigned gpio, int val) 116 { 117 struct xway_stp *chip = gpiochip_get_data(gc); 118 119 if (val) 120 chip->shadow |= BIT(gpio); 121 else 122 chip->shadow &= ~BIT(gpio); 123 xway_stp_w32(chip->virt, chip->shadow, XWAY_STP_CPU0); 124 if (!chip->reserved) 125 xway_stp_w32_mask(chip->virt, 0, XWAY_STP_CON_SWU, XWAY_STP_CON0); 126 } 127 128 /** 129 * xway_stp_dir_out() - gpio_chip->dir_out - set gpio direction. 130 * @gc: Pointer to gpio_chip device structure. 131 * @gpio: GPIO signal number. 132 * @val: Value to be written to specified signal. 133 * 134 * Same as xway_stp_set, always returns 0. 135 */ 136 static int xway_stp_dir_out(struct gpio_chip *gc, unsigned gpio, int val) 137 { 138 xway_stp_set(gc, gpio, val); 139 140 return 0; 141 } 142 143 /** 144 * xway_stp_request() - gpio_chip->request 145 * @gc: Pointer to gpio_chip device structure. 146 * @gpio: GPIO signal number. 147 * 148 * We mask out the HW driven pins 149 */ 150 static int xway_stp_request(struct gpio_chip *gc, unsigned gpio) 151 { 152 struct xway_stp *chip = gpiochip_get_data(gc); 153 154 if ((gpio < 8) && (chip->reserved & BIT(gpio))) { 155 dev_err(gc->parent, "GPIO %d is driven by hardware\n", gpio); 156 return -ENODEV; 157 } 158 159 return 0; 160 } 161 162 /** 163 * xway_stp_hw_init() - Configure the STP unit and enable the clock gate 164 * @chip: Pointer to the xway_stp chip structure 165 */ 166 static void xway_stp_hw_init(struct xway_stp *chip) 167 { 168 /* sane defaults */ 169 xway_stp_w32(chip->virt, 0, XWAY_STP_AR); 170 xway_stp_w32(chip->virt, 0, XWAY_STP_CPU0); 171 xway_stp_w32(chip->virt, 0, XWAY_STP_CPU1); 172 xway_stp_w32(chip->virt, XWAY_STP_CON_SWU, XWAY_STP_CON0); 173 xway_stp_w32(chip->virt, 0, XWAY_STP_CON1); 174 175 /* apply edge trigger settings for the shift register */ 176 xway_stp_w32_mask(chip->virt, XWAY_STP_EDGE_MASK, 177 chip->edge, XWAY_STP_CON0); 178 179 /* apply led group settings */ 180 xway_stp_w32_mask(chip->virt, XWAY_STP_GROUP_MASK, 181 chip->groups, XWAY_STP_CON1); 182 183 /* tell the hardware which pins are controlled by the dsl modem */ 184 xway_stp_w32_mask(chip->virt, 185 XWAY_STP_ADSL_MASK << XWAY_STP_ADSL_SHIFT, 186 chip->dsl << XWAY_STP_ADSL_SHIFT, 187 XWAY_STP_CON0); 188 189 /* tell the hardware which pins are controlled by the phys */ 190 xway_stp_w32_mask(chip->virt, 191 XWAY_STP_PHY_MASK << XWAY_STP_PHY1_SHIFT, 192 chip->phy1 << XWAY_STP_PHY1_SHIFT, 193 XWAY_STP_CON0); 194 xway_stp_w32_mask(chip->virt, 195 XWAY_STP_PHY_MASK << XWAY_STP_PHY2_SHIFT, 196 chip->phy2 << XWAY_STP_PHY2_SHIFT, 197 XWAY_STP_CON1); 198 199 if (of_machine_is_compatible("lantiq,grx390") 200 || of_machine_is_compatible("lantiq,ar10")) { 201 xway_stp_w32_mask(chip->virt, 202 XWAY_STP_PHY_MASK << XWAY_STP_PHY3_SHIFT, 203 chip->phy3 << XWAY_STP_PHY3_SHIFT, 204 XWAY_STP_CON1); 205 } 206 207 if (of_machine_is_compatible("lantiq,grx390")) { 208 xway_stp_w32_mask(chip->virt, 209 XWAY_STP_PHY_MASK << XWAY_STP_PHY4_SHIFT, 210 chip->phy4 << XWAY_STP_PHY4_SHIFT, 211 XWAY_STP_CON1); 212 } 213 214 /* mask out the hw driven bits in gpio_request */ 215 chip->reserved = (chip->phy4 << 11) | (chip->phy3 << 8) | (chip->phy2 << 5) 216 | (chip->phy1 << 2) | chip->dsl; 217 218 /* 219 * if we have pins that are driven by hw, we need to tell the stp what 220 * clock to use as a timer. 221 */ 222 if (chip->reserved) { 223 xway_stp_w32_mask(chip->virt, XWAY_STP_UPD_MASK, 224 XWAY_STP_UPD_FPI, XWAY_STP_CON1); 225 xway_stp_w32_mask(chip->virt, XWAY_STP_SPEED_MASK, 226 XWAY_STP_10HZ, XWAY_STP_CON1); 227 xway_stp_w32_mask(chip->virt, XWAY_STP_FPIS_MASK, 228 XWAY_STP_FPIS_VALUE, XWAY_STP_CON1); 229 } 230 } 231 232 static int xway_stp_probe(struct platform_device *pdev) 233 { 234 u32 shadow, groups, dsl, phy; 235 struct xway_stp *chip; 236 struct clk *clk; 237 int ret = 0; 238 239 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); 240 if (!chip) 241 return -ENOMEM; 242 243 chip->virt = devm_platform_ioremap_resource(pdev, 0); 244 if (IS_ERR(chip->virt)) 245 return PTR_ERR(chip->virt); 246 247 chip->gc.parent = &pdev->dev; 248 chip->gc.label = "stp-xway"; 249 chip->gc.direction_output = xway_stp_dir_out; 250 chip->gc.get = xway_stp_get; 251 chip->gc.set = xway_stp_set; 252 chip->gc.request = xway_stp_request; 253 chip->gc.base = -1; 254 chip->gc.owner = THIS_MODULE; 255 256 /* store the shadow value if one was passed by the devicetree */ 257 if (!of_property_read_u32(pdev->dev.of_node, "lantiq,shadow", &shadow)) 258 chip->shadow = shadow; 259 260 /* find out which gpio groups should be enabled */ 261 if (!of_property_read_u32(pdev->dev.of_node, "lantiq,groups", &groups)) 262 chip->groups = groups & XWAY_STP_GROUP_MASK; 263 else 264 chip->groups = XWAY_STP_GROUP0; 265 chip->gc.ngpio = fls(chip->groups) * 8; 266 267 /* find out which gpios are controlled by the dsl core */ 268 if (!of_property_read_u32(pdev->dev.of_node, "lantiq,dsl", &dsl)) 269 chip->dsl = dsl & XWAY_STP_ADSL_MASK; 270 271 /* find out which gpios are controlled by the phys */ 272 if (of_machine_is_compatible("lantiq,ar9") || 273 of_machine_is_compatible("lantiq,gr9") || 274 of_machine_is_compatible("lantiq,vr9") || 275 of_machine_is_compatible("lantiq,ar10") || 276 of_machine_is_compatible("lantiq,grx390")) { 277 if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy1", &phy)) 278 chip->phy1 = phy & XWAY_STP_PHY_MASK; 279 if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy2", &phy)) 280 chip->phy2 = phy & XWAY_STP_PHY_MASK; 281 } 282 283 if (of_machine_is_compatible("lantiq,ar10") || 284 of_machine_is_compatible("lantiq,grx390")) { 285 if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy3", &phy)) 286 chip->phy3 = phy & XWAY_STP_PHY_MASK; 287 } 288 289 if (of_machine_is_compatible("lantiq,grx390")) { 290 if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy4", &phy)) 291 chip->phy4 = phy & XWAY_STP_PHY_MASK; 292 } 293 294 /* check which edge trigger we should use, default to a falling edge */ 295 if (!of_find_property(pdev->dev.of_node, "lantiq,rising", NULL)) 296 chip->edge = XWAY_STP_FALLING; 297 298 clk = devm_clk_get(&pdev->dev, NULL); 299 if (IS_ERR(clk)) { 300 dev_err(&pdev->dev, "Failed to get clock\n"); 301 return PTR_ERR(clk); 302 } 303 304 ret = clk_prepare_enable(clk); 305 if (ret) 306 return ret; 307 308 xway_stp_hw_init(chip); 309 310 ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip); 311 if (ret) { 312 clk_disable_unprepare(clk); 313 return ret; 314 } 315 316 dev_info(&pdev->dev, "Init done\n"); 317 318 return 0; 319 } 320 321 static const struct of_device_id xway_stp_match[] = { 322 { .compatible = "lantiq,gpio-stp-xway" }, 323 {}, 324 }; 325 MODULE_DEVICE_TABLE(of, xway_stp_match); 326 327 static struct platform_driver xway_stp_driver = { 328 .probe = xway_stp_probe, 329 .driver = { 330 .name = "gpio-stp-xway", 331 .of_match_table = xway_stp_match, 332 }, 333 }; 334 335 static int __init xway_stp_init(void) 336 { 337 return platform_driver_register(&xway_stp_driver); 338 } 339 340 subsys_initcall(xway_stp_init); 341