1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) ST-Ericsson SA 2010 4 * 5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson 6 */ 7 8 #include <linux/init.h> 9 #include <linux/platform_device.h> 10 #include <linux/slab.h> 11 #include <linux/gpio/driver.h> 12 #include <linux/interrupt.h> 13 #include <linux/of.h> 14 #include <linux/mfd/stmpe.h> 15 #include <linux/seq_file.h> 16 #include <linux/bitops.h> 17 18 /* 19 * These registers are modified under the irq bus lock and cached to avoid 20 * unnecessary writes in bus_sync_unlock. 21 */ 22 enum { REG_RE, REG_FE, REG_IE }; 23 24 enum { LSB, CSB, MSB }; 25 26 #define CACHE_NR_REGS 3 27 /* No variant has more than 24 GPIOs */ 28 #define CACHE_NR_BANKS (24 / 8) 29 30 struct stmpe_gpio { 31 struct gpio_chip chip; 32 struct stmpe *stmpe; 33 struct device *dev; 34 struct mutex irq_lock; 35 u32 norequest_mask; 36 /* Caches of interrupt control registers for bus_lock */ 37 u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; 38 u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; 39 }; 40 41 static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) 42 { 43 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); 44 struct stmpe *stmpe = stmpe_gpio->stmpe; 45 u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)]; 46 u8 mask = BIT(offset % 8); 47 int ret; 48 49 ret = stmpe_reg_read(stmpe, reg); 50 if (ret < 0) 51 return ret; 52 53 return !!(ret & mask); 54 } 55 56 static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) 57 { 58 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); 59 struct stmpe *stmpe = stmpe_gpio->stmpe; 60 int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; 61 u8 reg = stmpe->regs[which + (offset / 8)]; 62 u8 mask = BIT(offset % 8); 63 64 /* 65 * Some variants have single register for gpio set/clear functionality. 66 * For them we need to write 0 to clear and 1 to set. 67 */ 68 if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB]) 69 stmpe_set_bits(stmpe, reg, mask, val ? mask : 0); 70 else 71 stmpe_reg_write(stmpe, reg, mask); 72 } 73 74 static int stmpe_gpio_get_direction(struct gpio_chip *chip, 75 unsigned offset) 76 { 77 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); 78 struct stmpe *stmpe = stmpe_gpio->stmpe; 79 u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); 80 u8 mask = BIT(offset % 8); 81 int ret; 82 83 ret = stmpe_reg_read(stmpe, reg); 84 if (ret < 0) 85 return ret; 86 87 if (ret & mask) 88 return GPIO_LINE_DIRECTION_OUT; 89 90 return GPIO_LINE_DIRECTION_IN; 91 } 92 93 static int stmpe_gpio_direction_output(struct gpio_chip *chip, 94 unsigned offset, int val) 95 { 96 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); 97 struct stmpe *stmpe = stmpe_gpio->stmpe; 98 u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; 99 u8 mask = BIT(offset % 8); 100 101 stmpe_gpio_set(chip, offset, val); 102 103 return stmpe_set_bits(stmpe, reg, mask, mask); 104 } 105 106 static int stmpe_gpio_direction_input(struct gpio_chip *chip, 107 unsigned offset) 108 { 109 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); 110 struct stmpe *stmpe = stmpe_gpio->stmpe; 111 u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; 112 u8 mask = BIT(offset % 8); 113 114 return stmpe_set_bits(stmpe, reg, mask, 0); 115 } 116 117 static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) 118 { 119 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); 120 struct stmpe *stmpe = stmpe_gpio->stmpe; 121 122 if (stmpe_gpio->norequest_mask & BIT(offset)) 123 return -EINVAL; 124 125 return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO); 126 } 127 128 static const struct gpio_chip template_chip = { 129 .label = "stmpe", 130 .owner = THIS_MODULE, 131 .get_direction = stmpe_gpio_get_direction, 132 .direction_input = stmpe_gpio_direction_input, 133 .get = stmpe_gpio_get, 134 .direction_output = stmpe_gpio_direction_output, 135 .set = stmpe_gpio_set, 136 .request = stmpe_gpio_request, 137 .can_sleep = true, 138 }; 139 140 static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) 141 { 142 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 143 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); 144 int offset = d->hwirq; 145 int regoffset = offset / 8; 146 int mask = BIT(offset % 8); 147 148 if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH) 149 return -EINVAL; 150 151 /* STMPE801 and STMPE 1600 don't have RE and FE registers */ 152 if (stmpe_gpio->stmpe->partnum == STMPE801 || 153 stmpe_gpio->stmpe->partnum == STMPE1600) 154 return 0; 155 156 if (type & IRQ_TYPE_EDGE_RISING) 157 stmpe_gpio->regs[REG_RE][regoffset] |= mask; 158 else 159 stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; 160 161 if (type & IRQ_TYPE_EDGE_FALLING) 162 stmpe_gpio->regs[REG_FE][regoffset] |= mask; 163 else 164 stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; 165 166 return 0; 167 } 168 169 static void stmpe_gpio_irq_lock(struct irq_data *d) 170 { 171 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 172 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); 173 174 mutex_lock(&stmpe_gpio->irq_lock); 175 } 176 177 static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) 178 { 179 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 180 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); 181 struct stmpe *stmpe = stmpe_gpio->stmpe; 182 int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); 183 static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = { 184 [REG_RE][LSB] = STMPE_IDX_GPRER_LSB, 185 [REG_RE][CSB] = STMPE_IDX_GPRER_CSB, 186 [REG_RE][MSB] = STMPE_IDX_GPRER_MSB, 187 [REG_FE][LSB] = STMPE_IDX_GPFER_LSB, 188 [REG_FE][CSB] = STMPE_IDX_GPFER_CSB, 189 [REG_FE][MSB] = STMPE_IDX_GPFER_MSB, 190 [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB, 191 [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB, 192 [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB, 193 }; 194 int i, j; 195 196 /* 197 * STMPE1600: to be able to get IRQ from pins, 198 * a read must be done on GPMR register, or a write in 199 * GPSR or GPCR registers 200 */ 201 if (stmpe->partnum == STMPE1600) { 202 stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]); 203 stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]); 204 } 205 206 for (i = 0; i < CACHE_NR_REGS; i++) { 207 /* STMPE801 and STMPE1600 don't have RE and FE registers */ 208 if ((stmpe->partnum == STMPE801 || 209 stmpe->partnum == STMPE1600) && 210 (i != REG_IE)) 211 continue; 212 213 for (j = 0; j < num_banks; j++) { 214 u8 old = stmpe_gpio->oldregs[i][j]; 215 u8 new = stmpe_gpio->regs[i][j]; 216 217 if (new == old) 218 continue; 219 220 stmpe_gpio->oldregs[i][j] = new; 221 stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new); 222 } 223 } 224 225 mutex_unlock(&stmpe_gpio->irq_lock); 226 } 227 228 static void stmpe_gpio_irq_mask(struct irq_data *d) 229 { 230 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 231 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); 232 int offset = d->hwirq; 233 int regoffset = offset / 8; 234 int mask = BIT(offset % 8); 235 236 stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; 237 } 238 239 static void stmpe_gpio_irq_unmask(struct irq_data *d) 240 { 241 struct gpio_chip *gc = irq_data_get_irq_chip_data(d); 242 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); 243 int offset = d->hwirq; 244 int regoffset = offset / 8; 245 int mask = BIT(offset % 8); 246 247 stmpe_gpio->regs[REG_IE][regoffset] |= mask; 248 } 249 250 static void stmpe_dbg_show_one(struct seq_file *s, 251 struct gpio_chip *gc, 252 unsigned offset, unsigned gpio) 253 { 254 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); 255 struct stmpe *stmpe = stmpe_gpio->stmpe; 256 const char *label = gpiochip_is_requested(gc, offset); 257 bool val = !!stmpe_gpio_get(gc, offset); 258 u8 bank = offset / 8; 259 u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank]; 260 u8 mask = BIT(offset % 8); 261 int ret; 262 u8 dir; 263 264 ret = stmpe_reg_read(stmpe, dir_reg); 265 if (ret < 0) 266 return; 267 dir = !!(ret & mask); 268 269 if (dir) { 270 seq_printf(s, " gpio-%-3d (%-20.20s) out %s", 271 gpio, label ?: "(none)", 272 val ? "hi" : "lo"); 273 } else { 274 u8 edge_det_reg; 275 u8 rise_reg; 276 u8 fall_reg; 277 u8 irqen_reg; 278 279 static const char * const edge_det_values[] = { 280 "edge-inactive", 281 "edge-asserted", 282 "not-supported" 283 }; 284 static const char * const rise_values[] = { 285 "no-rising-edge-detection", 286 "rising-edge-detection", 287 "not-supported" 288 }; 289 static const char * const fall_values[] = { 290 "no-falling-edge-detection", 291 "falling-edge-detection", 292 "not-supported" 293 }; 294 #define NOT_SUPPORTED_IDX 2 295 u8 edge_det = NOT_SUPPORTED_IDX; 296 u8 rise = NOT_SUPPORTED_IDX; 297 u8 fall = NOT_SUPPORTED_IDX; 298 bool irqen; 299 300 switch (stmpe->partnum) { 301 case STMPE610: 302 case STMPE811: 303 case STMPE1601: 304 case STMPE2401: 305 case STMPE2403: 306 edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank]; 307 ret = stmpe_reg_read(stmpe, edge_det_reg); 308 if (ret < 0) 309 return; 310 edge_det = !!(ret & mask); 311 /* fall through */ 312 case STMPE1801: 313 rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank]; 314 fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank]; 315 316 ret = stmpe_reg_read(stmpe, rise_reg); 317 if (ret < 0) 318 return; 319 rise = !!(ret & mask); 320 ret = stmpe_reg_read(stmpe, fall_reg); 321 if (ret < 0) 322 return; 323 fall = !!(ret & mask); 324 /* fall through */ 325 case STMPE801: 326 case STMPE1600: 327 irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank]; 328 break; 329 330 default: 331 return; 332 } 333 334 ret = stmpe_reg_read(stmpe, irqen_reg); 335 if (ret < 0) 336 return; 337 irqen = !!(ret & mask); 338 339 seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s", 340 gpio, label ?: "(none)", 341 val ? "hi" : "lo", 342 edge_det_values[edge_det], 343 irqen ? "IRQ-enabled" : "IRQ-disabled", 344 rise_values[rise], 345 fall_values[fall]); 346 } 347 } 348 349 static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc) 350 { 351 unsigned i; 352 unsigned gpio = gc->base; 353 354 for (i = 0; i < gc->ngpio; i++, gpio++) { 355 stmpe_dbg_show_one(s, gc, i, gpio); 356 seq_putc(s, '\n'); 357 } 358 } 359 360 static struct irq_chip stmpe_gpio_irq_chip = { 361 .name = "stmpe-gpio", 362 .irq_bus_lock = stmpe_gpio_irq_lock, 363 .irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock, 364 .irq_mask = stmpe_gpio_irq_mask, 365 .irq_unmask = stmpe_gpio_irq_unmask, 366 .irq_set_type = stmpe_gpio_irq_set_type, 367 }; 368 369 #define MAX_GPIOS 24 370 371 static irqreturn_t stmpe_gpio_irq(int irq, void *dev) 372 { 373 struct stmpe_gpio *stmpe_gpio = dev; 374 struct stmpe *stmpe = stmpe_gpio->stmpe; 375 u8 statmsbreg; 376 int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); 377 u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)]; 378 int ret; 379 int i; 380 381 /* 382 * the stmpe_block_read() call below, imposes to set statmsbreg 383 * with the register located at the lowest address. As STMPE1600 384 * variant is the only one which respect registers address's order 385 * (LSB regs located at lowest address than MSB ones) whereas all 386 * the others have a registers layout with MSB located before the 387 * LSB regs. 388 */ 389 if (stmpe->partnum == STMPE1600) 390 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB]; 391 else 392 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; 393 394 ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); 395 if (ret < 0) 396 return IRQ_NONE; 397 398 for (i = 0; i < num_banks; i++) { 399 int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i : 400 num_banks - i - 1; 401 unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; 402 unsigned int stat = status[i]; 403 404 stat &= enabled; 405 if (!stat) 406 continue; 407 408 while (stat) { 409 int bit = __ffs(stat); 410 int line = bank * 8 + bit; 411 int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain, 412 line); 413 414 handle_nested_irq(child_irq); 415 stat &= ~BIT(bit); 416 } 417 418 /* 419 * interrupt status register write has no effect on 420 * 801/1801/1600, bits are cleared when read. 421 * Edge detect register is not present on 801/1600/1801 422 */ 423 if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 && 424 stmpe->partnum != STMPE1801) { 425 stmpe_reg_write(stmpe, statmsbreg + i, status[i]); 426 stmpe_reg_write(stmpe, 427 stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, 428 status[i]); 429 } 430 } 431 432 return IRQ_HANDLED; 433 } 434 435 static void stmpe_init_irq_valid_mask(struct gpio_chip *gc, 436 unsigned long *valid_mask, 437 unsigned int ngpios) 438 { 439 struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); 440 int i; 441 442 if (!stmpe_gpio->norequest_mask) 443 return; 444 445 /* Forbid unused lines to be mapped as IRQs */ 446 for (i = 0; i < sizeof(u32); i++) { 447 if (stmpe_gpio->norequest_mask & BIT(i)) 448 clear_bit(i, valid_mask); 449 } 450 } 451 452 static int stmpe_gpio_probe(struct platform_device *pdev) 453 { 454 struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); 455 struct device_node *np = pdev->dev.of_node; 456 struct stmpe_gpio *stmpe_gpio; 457 int ret, irq; 458 459 if (stmpe->num_gpios > MAX_GPIOS) { 460 dev_err(&pdev->dev, "Need to increase maximum GPIO number\n"); 461 return -EINVAL; 462 } 463 464 stmpe_gpio = kzalloc(sizeof(*stmpe_gpio), GFP_KERNEL); 465 if (!stmpe_gpio) 466 return -ENOMEM; 467 468 mutex_init(&stmpe_gpio->irq_lock); 469 470 stmpe_gpio->dev = &pdev->dev; 471 stmpe_gpio->stmpe = stmpe; 472 stmpe_gpio->chip = template_chip; 473 stmpe_gpio->chip.ngpio = stmpe->num_gpios; 474 stmpe_gpio->chip.parent = &pdev->dev; 475 stmpe_gpio->chip.of_node = np; 476 stmpe_gpio->chip.base = -1; 477 /* 478 * REVISIT: this makes sure the valid mask gets allocated and 479 * filled in when adding the gpio_chip, but the rest of the 480 * gpio_irqchip is still filled in using the old method 481 * in gpiochip_irqchip_add_nested() so clean this up once we 482 * get the gpio_irqchip to initialize while adding the 483 * gpio_chip also for threaded irqchips. 484 */ 485 stmpe_gpio->chip.irq.init_valid_mask = stmpe_init_irq_valid_mask; 486 487 if (IS_ENABLED(CONFIG_DEBUG_FS)) 488 stmpe_gpio->chip.dbg_show = stmpe_dbg_show; 489 490 of_property_read_u32(np, "st,norequest-mask", 491 &stmpe_gpio->norequest_mask); 492 493 irq = platform_get_irq(pdev, 0); 494 if (irq < 0) 495 dev_info(&pdev->dev, 496 "device configured in no-irq mode: " 497 "irqs are not available\n"); 498 499 ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); 500 if (ret) 501 goto out_free; 502 503 ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio); 504 if (ret) { 505 dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); 506 goto out_disable; 507 } 508 509 if (irq > 0) { 510 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, 511 stmpe_gpio_irq, IRQF_ONESHOT, 512 "stmpe-gpio", stmpe_gpio); 513 if (ret) { 514 dev_err(&pdev->dev, "unable to get irq: %d\n", ret); 515 goto out_disable; 516 } 517 ret = gpiochip_irqchip_add_nested(&stmpe_gpio->chip, 518 &stmpe_gpio_irq_chip, 519 0, 520 handle_simple_irq, 521 IRQ_TYPE_NONE); 522 if (ret) { 523 dev_err(&pdev->dev, 524 "could not connect irqchip to gpiochip\n"); 525 goto out_disable; 526 } 527 528 gpiochip_set_nested_irqchip(&stmpe_gpio->chip, 529 &stmpe_gpio_irq_chip, 530 irq); 531 } 532 533 platform_set_drvdata(pdev, stmpe_gpio); 534 535 return 0; 536 537 out_disable: 538 stmpe_disable(stmpe, STMPE_BLOCK_GPIO); 539 gpiochip_remove(&stmpe_gpio->chip); 540 out_free: 541 kfree(stmpe_gpio); 542 return ret; 543 } 544 545 static struct platform_driver stmpe_gpio_driver = { 546 .driver = { 547 .suppress_bind_attrs = true, 548 .name = "stmpe-gpio", 549 }, 550 .probe = stmpe_gpio_probe, 551 }; 552 553 static int __init stmpe_gpio_init(void) 554 { 555 return platform_driver_register(&stmpe_gpio_driver); 556 } 557 subsys_initcall(stmpe_gpio_init); 558