xref: /openbmc/linux/drivers/gpio/gpio-sch.c (revision 8730046c)
1 /*
2  * GPIO interface for Intel Poulsbo SCH
3  *
4  *  Copyright (c) 2010 CompuLab Ltd
5  *  Author: Denis Turischev <denis@compulab.co.il>
6  *
7  *  This program is free software; you can redistribute it and/or modify
8  *  it under the terms of the GNU General Public License 2 as published
9  *  by the Free Software Foundation.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *  GNU General Public License for more details.
15  *
16  *  You should have received a copy of the GNU General Public License
17  *  along with this program; see the file COPYING.  If not, write to
18  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
19  */
20 
21 #include <linux/init.h>
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/io.h>
25 #include <linux/errno.h>
26 #include <linux/acpi.h>
27 #include <linux/platform_device.h>
28 #include <linux/pci_ids.h>
29 
30 #include <linux/gpio.h>
31 
32 #define GEN	0x00
33 #define GIO	0x04
34 #define GLV	0x08
35 
36 struct sch_gpio {
37 	struct gpio_chip chip;
38 	spinlock_t lock;
39 	unsigned short iobase;
40 	unsigned short core_base;
41 	unsigned short resume_base;
42 };
43 
44 static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio,
45 				unsigned reg)
46 {
47 	unsigned base = 0;
48 
49 	if (gpio >= sch->resume_base) {
50 		gpio -= sch->resume_base;
51 		base += 0x20;
52 	}
53 
54 	return base + reg + gpio / 8;
55 }
56 
57 static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio)
58 {
59 	if (gpio >= sch->resume_base)
60 		gpio -= sch->resume_base;
61 	return gpio % 8;
62 }
63 
64 static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned gpio, unsigned reg)
65 {
66 	unsigned short offset, bit;
67 	u8 reg_val;
68 
69 	offset = sch_gpio_offset(sch, gpio, reg);
70 	bit = sch_gpio_bit(sch, gpio);
71 
72 	reg_val = !!(inb(sch->iobase + offset) & BIT(bit));
73 
74 	return reg_val;
75 }
76 
77 static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned gpio, unsigned reg,
78 			     int val)
79 {
80 	unsigned short offset, bit;
81 	u8 reg_val;
82 
83 	offset = sch_gpio_offset(sch, gpio, reg);
84 	bit = sch_gpio_bit(sch, gpio);
85 
86 	reg_val = inb(sch->iobase + offset);
87 
88 	if (val)
89 		outb(reg_val | BIT(bit), sch->iobase + offset);
90 	else
91 		outb((reg_val & ~BIT(bit)), sch->iobase + offset);
92 }
93 
94 static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num)
95 {
96 	struct sch_gpio *sch = gpiochip_get_data(gc);
97 
98 	spin_lock(&sch->lock);
99 	sch_gpio_reg_set(sch, gpio_num, GIO, 1);
100 	spin_unlock(&sch->lock);
101 	return 0;
102 }
103 
104 static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
105 {
106 	struct sch_gpio *sch = gpiochip_get_data(gc);
107 	return sch_gpio_reg_get(sch, gpio_num, GLV);
108 }
109 
110 static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val)
111 {
112 	struct sch_gpio *sch = gpiochip_get_data(gc);
113 
114 	spin_lock(&sch->lock);
115 	sch_gpio_reg_set(sch, gpio_num, GLV, val);
116 	spin_unlock(&sch->lock);
117 }
118 
119 static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
120 				  int val)
121 {
122 	struct sch_gpio *sch = gpiochip_get_data(gc);
123 
124 	spin_lock(&sch->lock);
125 	sch_gpio_reg_set(sch, gpio_num, GIO, 0);
126 	spin_unlock(&sch->lock);
127 
128 	/*
129 	 * according to the datasheet, writing to the level register has no
130 	 * effect when GPIO is programmed as input.
131 	 * Actually the the level register is read-only when configured as input.
132 	 * Thus presetting the output level before switching to output is _NOT_ possible.
133 	 * Hence we set the level after configuring the GPIO as output.
134 	 * But we cannot prevent a short low pulse if direction is set to high
135 	 * and an external pull-up is connected.
136 	 */
137 	sch_gpio_set(gc, gpio_num, val);
138 	return 0;
139 }
140 
141 static const struct gpio_chip sch_gpio_chip = {
142 	.label			= "sch_gpio",
143 	.owner			= THIS_MODULE,
144 	.direction_input	= sch_gpio_direction_in,
145 	.get			= sch_gpio_get,
146 	.direction_output	= sch_gpio_direction_out,
147 	.set			= sch_gpio_set,
148 };
149 
150 static int sch_gpio_probe(struct platform_device *pdev)
151 {
152 	struct sch_gpio *sch;
153 	struct resource *res;
154 
155 	sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
156 	if (!sch)
157 		return -ENOMEM;
158 
159 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
160 	if (!res)
161 		return -EBUSY;
162 
163 	if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
164 				 pdev->name))
165 		return -EBUSY;
166 
167 	spin_lock_init(&sch->lock);
168 	sch->iobase = res->start;
169 	sch->chip = sch_gpio_chip;
170 	sch->chip.label = dev_name(&pdev->dev);
171 	sch->chip.parent = &pdev->dev;
172 
173 	switch (pdev->id) {
174 	case PCI_DEVICE_ID_INTEL_SCH_LPC:
175 		sch->core_base = 0;
176 		sch->resume_base = 10;
177 		sch->chip.ngpio = 14;
178 
179 		/*
180 		 * GPIO[6:0] enabled by default
181 		 * GPIO7 is configured by the CMC as SLPIOVR
182 		 * Enable GPIO[9:8] core powered gpios explicitly
183 		 */
184 		sch_gpio_reg_set(sch, 8, GEN, 1);
185 		sch_gpio_reg_set(sch, 9, GEN, 1);
186 		/*
187 		 * SUS_GPIO[2:0] enabled by default
188 		 * Enable SUS_GPIO3 resume powered gpio explicitly
189 		 */
190 		sch_gpio_reg_set(sch, 13, GEN, 1);
191 		break;
192 
193 	case PCI_DEVICE_ID_INTEL_ITC_LPC:
194 		sch->core_base = 0;
195 		sch->resume_base = 5;
196 		sch->chip.ngpio = 14;
197 		break;
198 
199 	case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
200 		sch->core_base = 0;
201 		sch->resume_base = 21;
202 		sch->chip.ngpio = 30;
203 		break;
204 
205 	case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
206 		sch->core_base = 0;
207 		sch->resume_base = 2;
208 		sch->chip.ngpio = 8;
209 		break;
210 
211 	default:
212 		return -ENODEV;
213 	}
214 
215 	platform_set_drvdata(pdev, sch);
216 
217 	return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch);
218 }
219 
220 static struct platform_driver sch_gpio_driver = {
221 	.driver = {
222 		.name = "sch_gpio",
223 	},
224 	.probe		= sch_gpio_probe,
225 };
226 
227 module_platform_driver(sch_gpio_driver);
228 
229 MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
230 MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
231 MODULE_LICENSE("GPL");
232 MODULE_ALIAS("platform:sch_gpio");
233