1 /* 2 * linux/arch/arm/mach-sa1100/gpio.c 3 * 4 * Generic SA-1100 GPIO handling 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 #include <linux/gpio.h> 11 #include <linux/init.h> 12 #include <linux/module.h> 13 #include <linux/io.h> 14 #include <linux/syscore_ops.h> 15 #include <mach/hardware.h> 16 #include <mach/irqs.h> 17 18 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) 19 { 20 return GPLR & GPIO_GPIO(offset); 21 } 22 23 static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) 24 { 25 if (value) 26 GPSR = GPIO_GPIO(offset); 27 else 28 GPCR = GPIO_GPIO(offset); 29 } 30 31 static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset) 32 { 33 unsigned long flags; 34 35 local_irq_save(flags); 36 GPDR &= ~GPIO_GPIO(offset); 37 local_irq_restore(flags); 38 return 0; 39 } 40 41 static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value) 42 { 43 unsigned long flags; 44 45 local_irq_save(flags); 46 sa1100_gpio_set(chip, offset, value); 47 GPDR |= GPIO_GPIO(offset); 48 local_irq_restore(flags); 49 return 0; 50 } 51 52 static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset) 53 { 54 return IRQ_GPIO0 + offset; 55 } 56 57 static struct gpio_chip sa1100_gpio_chip = { 58 .label = "gpio", 59 .direction_input = sa1100_direction_input, 60 .direction_output = sa1100_direction_output, 61 .set = sa1100_gpio_set, 62 .get = sa1100_gpio_get, 63 .to_irq = sa1100_to_irq, 64 .base = 0, 65 .ngpio = GPIO_MAX + 1, 66 }; 67 68 /* 69 * SA1100 GPIO edge detection for IRQs: 70 * IRQs are generated on Falling-Edge, Rising-Edge, or both. 71 * Use this instead of directly setting GRER/GFER. 72 */ 73 static int GPIO_IRQ_rising_edge; 74 static int GPIO_IRQ_falling_edge; 75 static int GPIO_IRQ_mask; 76 77 static int sa1100_gpio_type(struct irq_data *d, unsigned int type) 78 { 79 unsigned int mask; 80 81 mask = BIT(d->hwirq); 82 83 if (type == IRQ_TYPE_PROBE) { 84 if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) 85 return 0; 86 type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; 87 } 88 89 if (type & IRQ_TYPE_EDGE_RISING) 90 GPIO_IRQ_rising_edge |= mask; 91 else 92 GPIO_IRQ_rising_edge &= ~mask; 93 if (type & IRQ_TYPE_EDGE_FALLING) 94 GPIO_IRQ_falling_edge |= mask; 95 else 96 GPIO_IRQ_falling_edge &= ~mask; 97 98 GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; 99 GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; 100 101 return 0; 102 } 103 104 /* 105 * GPIO IRQs must be acknowledged. 106 */ 107 static void sa1100_gpio_ack(struct irq_data *d) 108 { 109 GEDR = BIT(d->hwirq); 110 } 111 112 static void sa1100_gpio_mask(struct irq_data *d) 113 { 114 unsigned int mask = BIT(d->hwirq); 115 116 GPIO_IRQ_mask &= ~mask; 117 118 GRER &= ~mask; 119 GFER &= ~mask; 120 } 121 122 static void sa1100_gpio_unmask(struct irq_data *d) 123 { 124 unsigned int mask = BIT(d->hwirq); 125 126 GPIO_IRQ_mask |= mask; 127 128 GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; 129 GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; 130 } 131 132 static int sa1100_gpio_wake(struct irq_data *d, unsigned int on) 133 { 134 if (on) 135 PWER |= BIT(d->hwirq); 136 else 137 PWER &= ~BIT(d->hwirq); 138 return 0; 139 } 140 141 /* 142 * This is for GPIO IRQs 143 */ 144 static struct irq_chip sa1100_gpio_irq_chip = { 145 .name = "GPIO", 146 .irq_ack = sa1100_gpio_ack, 147 .irq_mask = sa1100_gpio_mask, 148 .irq_unmask = sa1100_gpio_unmask, 149 .irq_set_type = sa1100_gpio_type, 150 .irq_set_wake = sa1100_gpio_wake, 151 }; 152 153 static int sa1100_gpio_irqdomain_map(struct irq_domain *d, 154 unsigned int irq, irq_hw_number_t hwirq) 155 { 156 irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip, 157 handle_edge_irq); 158 irq_set_noprobe(irq); 159 160 return 0; 161 } 162 163 static const struct irq_domain_ops sa1100_gpio_irqdomain_ops = { 164 .map = sa1100_gpio_irqdomain_map, 165 .xlate = irq_domain_xlate_onetwocell, 166 }; 167 168 static struct irq_domain *sa1100_gpio_irqdomain; 169 170 /* 171 * IRQ 0-11 (GPIO) handler. We enter here with the 172 * irq_controller_lock held, and IRQs disabled. Decode the IRQ 173 * and call the handler. 174 */ 175 static void sa1100_gpio_handler(struct irq_desc *desc) 176 { 177 unsigned int irq, mask; 178 179 mask = GEDR; 180 do { 181 /* 182 * clear down all currently active IRQ sources. 183 * We will be processing them all. 184 */ 185 GEDR = mask; 186 187 irq = IRQ_GPIO0; 188 do { 189 if (mask & 1) 190 generic_handle_irq(irq); 191 mask >>= 1; 192 irq++; 193 } while (mask); 194 195 mask = GEDR; 196 } while (mask); 197 } 198 199 static int sa1100_gpio_suspend(void) 200 { 201 /* 202 * Set the appropriate edges for wakeup. 203 */ 204 GRER = PWER & GPIO_IRQ_rising_edge; 205 GFER = PWER & GPIO_IRQ_falling_edge; 206 207 /* 208 * Clear any pending GPIO interrupts. 209 */ 210 GEDR = GEDR; 211 212 return 0; 213 } 214 215 static void sa1100_gpio_resume(void) 216 { 217 GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; 218 GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; 219 } 220 221 static struct syscore_ops sa1100_gpio_syscore_ops = { 222 .suspend = sa1100_gpio_suspend, 223 .resume = sa1100_gpio_resume, 224 }; 225 226 static int __init sa1100_gpio_init_devicefs(void) 227 { 228 register_syscore_ops(&sa1100_gpio_syscore_ops); 229 return 0; 230 } 231 232 device_initcall(sa1100_gpio_init_devicefs); 233 234 void __init sa1100_init_gpio(void) 235 { 236 /* clear all GPIO edge detects */ 237 GFER = 0; 238 GRER = 0; 239 GEDR = -1; 240 241 gpiochip_add(&sa1100_gpio_chip); 242 243 sa1100_gpio_irqdomain = irq_domain_add_simple(NULL, 244 28, IRQ_GPIO0, 245 &sa1100_gpio_irqdomain_ops, NULL); 246 247 /* 248 * Install handlers for GPIO 0-10 edge detect interrupts 249 */ 250 irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler); 251 irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler); 252 irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler); 253 irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler); 254 irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler); 255 irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler); 256 irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler); 257 irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler); 258 irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler); 259 irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler); 260 irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler); 261 /* 262 * Install handler for GPIO 11-27 edge detect interrupts 263 */ 264 irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler); 265 266 } 267