xref: /openbmc/linux/drivers/gpio/gpio-rcar.c (revision 5927145e)
1 /*
2  * Renesas R-Car GPIO Support
3  *
4  *  Copyright (C) 2014 Renesas Electronics Corporation
5  *  Copyright (C) 2013 Magnus Damm
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  */
16 
17 #include <linux/clk.h>
18 #include <linux/err.h>
19 #include <linux/gpio.h>
20 #include <linux/init.h>
21 #include <linux/interrupt.h>
22 #include <linux/io.h>
23 #include <linux/ioport.h>
24 #include <linux/irq.h>
25 #include <linux/module.h>
26 #include <linux/of.h>
27 #include <linux/of_device.h>
28 #include <linux/pinctrl/consumer.h>
29 #include <linux/platform_device.h>
30 #include <linux/pm_runtime.h>
31 #include <linux/spinlock.h>
32 #include <linux/slab.h>
33 
34 struct gpio_rcar_priv {
35 	void __iomem *base;
36 	spinlock_t lock;
37 	struct platform_device *pdev;
38 	struct gpio_chip gpio_chip;
39 	struct irq_chip irq_chip;
40 	struct clk *clk;
41 	unsigned int irq_parent;
42 	bool has_both_edge_trigger;
43 	bool needs_clk;
44 };
45 
46 #define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */
47 #define INOUTSEL 0x04	/* General Input/Output Switching Register */
48 #define OUTDT 0x08	/* General Output Register */
49 #define INDT 0x0c	/* General Input Register */
50 #define INTDT 0x10	/* Interrupt Display Register */
51 #define INTCLR 0x14	/* Interrupt Clear Register */
52 #define INTMSK 0x18	/* Interrupt Mask Register */
53 #define MSKCLR 0x1c	/* Interrupt Mask Clear Register */
54 #define POSNEG 0x20	/* Positive/Negative Logic Select Register */
55 #define EDGLEVEL 0x24	/* Edge/level Select Register */
56 #define FILONOFF 0x28	/* Chattering Prevention On/Off Register */
57 #define BOTHEDGE 0x4c	/* One Edge/Both Edge Select Register */
58 
59 #define RCAR_MAX_GPIO_PER_BANK		32
60 
61 static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
62 {
63 	return ioread32(p->base + offs);
64 }
65 
66 static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
67 				   u32 value)
68 {
69 	iowrite32(value, p->base + offs);
70 }
71 
72 static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
73 				 int bit, bool value)
74 {
75 	u32 tmp = gpio_rcar_read(p, offs);
76 
77 	if (value)
78 		tmp |= BIT(bit);
79 	else
80 		tmp &= ~BIT(bit);
81 
82 	gpio_rcar_write(p, offs, tmp);
83 }
84 
85 static void gpio_rcar_irq_disable(struct irq_data *d)
86 {
87 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
88 	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
89 
90 	gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
91 }
92 
93 static void gpio_rcar_irq_enable(struct irq_data *d)
94 {
95 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
96 	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
97 
98 	gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
99 }
100 
101 static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
102 						  unsigned int hwirq,
103 						  bool active_high_rising_edge,
104 						  bool level_trigger,
105 						  bool both)
106 {
107 	unsigned long flags;
108 
109 	/* follow steps in the GPIO documentation for
110 	 * "Setting Edge-Sensitive Interrupt Input Mode" and
111 	 * "Setting Level-Sensitive Interrupt Input Mode"
112 	 */
113 
114 	spin_lock_irqsave(&p->lock, flags);
115 
116 	/* Configure postive or negative logic in POSNEG */
117 	gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
118 
119 	/* Configure edge or level trigger in EDGLEVEL */
120 	gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
121 
122 	/* Select one edge or both edges in BOTHEDGE */
123 	if (p->has_both_edge_trigger)
124 		gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
125 
126 	/* Select "Interrupt Input Mode" in IOINTSEL */
127 	gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
128 
129 	/* Write INTCLR in case of edge trigger */
130 	if (!level_trigger)
131 		gpio_rcar_write(p, INTCLR, BIT(hwirq));
132 
133 	spin_unlock_irqrestore(&p->lock, flags);
134 }
135 
136 static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
137 {
138 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
139 	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
140 	unsigned int hwirq = irqd_to_hwirq(d);
141 
142 	dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type);
143 
144 	switch (type & IRQ_TYPE_SENSE_MASK) {
145 	case IRQ_TYPE_LEVEL_HIGH:
146 		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
147 						      false);
148 		break;
149 	case IRQ_TYPE_LEVEL_LOW:
150 		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
151 						      false);
152 		break;
153 	case IRQ_TYPE_EDGE_RISING:
154 		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
155 						      false);
156 		break;
157 	case IRQ_TYPE_EDGE_FALLING:
158 		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
159 						      false);
160 		break;
161 	case IRQ_TYPE_EDGE_BOTH:
162 		if (!p->has_both_edge_trigger)
163 			return -EINVAL;
164 		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
165 						      true);
166 		break;
167 	default:
168 		return -EINVAL;
169 	}
170 	return 0;
171 }
172 
173 static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
174 {
175 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
176 	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
177 	int error;
178 
179 	if (p->irq_parent) {
180 		error = irq_set_irq_wake(p->irq_parent, on);
181 		if (error) {
182 			dev_dbg(&p->pdev->dev,
183 				"irq %u doesn't support irq_set_wake\n",
184 				p->irq_parent);
185 			p->irq_parent = 0;
186 		}
187 	}
188 
189 	if (!p->clk)
190 		return 0;
191 
192 	if (on)
193 		clk_enable(p->clk);
194 	else
195 		clk_disable(p->clk);
196 
197 	return 0;
198 }
199 
200 static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
201 {
202 	struct gpio_rcar_priv *p = dev_id;
203 	u32 pending;
204 	unsigned int offset, irqs_handled = 0;
205 
206 	while ((pending = gpio_rcar_read(p, INTDT) &
207 			  gpio_rcar_read(p, INTMSK))) {
208 		offset = __ffs(pending);
209 		gpio_rcar_write(p, INTCLR, BIT(offset));
210 		generic_handle_irq(irq_find_mapping(p->gpio_chip.irq.domain,
211 						    offset));
212 		irqs_handled++;
213 	}
214 
215 	return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
216 }
217 
218 static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
219 						       unsigned int gpio,
220 						       bool output)
221 {
222 	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
223 	unsigned long flags;
224 
225 	/* follow steps in the GPIO documentation for
226 	 * "Setting General Output Mode" and
227 	 * "Setting General Input Mode"
228 	 */
229 
230 	spin_lock_irqsave(&p->lock, flags);
231 
232 	/* Configure postive logic in POSNEG */
233 	gpio_rcar_modify_bit(p, POSNEG, gpio, false);
234 
235 	/* Select "General Input/Output Mode" in IOINTSEL */
236 	gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
237 
238 	/* Select Input Mode or Output Mode in INOUTSEL */
239 	gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
240 
241 	spin_unlock_irqrestore(&p->lock, flags);
242 }
243 
244 static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
245 {
246 	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
247 	int error;
248 
249 	error = pm_runtime_get_sync(&p->pdev->dev);
250 	if (error < 0)
251 		return error;
252 
253 	error = pinctrl_gpio_request(chip->base + offset);
254 	if (error)
255 		pm_runtime_put(&p->pdev->dev);
256 
257 	return error;
258 }
259 
260 static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
261 {
262 	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
263 
264 	pinctrl_gpio_free(chip->base + offset);
265 
266 	/*
267 	 * Set the GPIO as an input to ensure that the next GPIO request won't
268 	 * drive the GPIO pin as an output.
269 	 */
270 	gpio_rcar_config_general_input_output_mode(chip, offset, false);
271 
272 	pm_runtime_put(&p->pdev->dev);
273 }
274 
275 static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
276 {
277 	gpio_rcar_config_general_input_output_mode(chip, offset, false);
278 	return 0;
279 }
280 
281 static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
282 {
283 	u32 bit = BIT(offset);
284 
285 	/* testing on r8a7790 shows that INDT does not show correct pin state
286 	 * when configured as output, so use OUTDT in case of output pins */
287 	if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit)
288 		return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit);
289 	else
290 		return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit);
291 }
292 
293 static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
294 {
295 	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
296 	unsigned long flags;
297 
298 	spin_lock_irqsave(&p->lock, flags);
299 	gpio_rcar_modify_bit(p, OUTDT, offset, value);
300 	spin_unlock_irqrestore(&p->lock, flags);
301 }
302 
303 static void gpio_rcar_set_multiple(struct gpio_chip *chip, unsigned long *mask,
304 				   unsigned long *bits)
305 {
306 	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
307 	unsigned long flags;
308 	u32 val, bankmask;
309 
310 	bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0);
311 	if (!bankmask)
312 		return;
313 
314 	spin_lock_irqsave(&p->lock, flags);
315 	val = gpio_rcar_read(p, OUTDT);
316 	val &= ~bankmask;
317 	val |= (bankmask & bits[0]);
318 	gpio_rcar_write(p, OUTDT, val);
319 	spin_unlock_irqrestore(&p->lock, flags);
320 }
321 
322 static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
323 				      int value)
324 {
325 	/* write GPIO value to output before selecting output mode of pin */
326 	gpio_rcar_set(chip, offset, value);
327 	gpio_rcar_config_general_input_output_mode(chip, offset, true);
328 	return 0;
329 }
330 
331 struct gpio_rcar_info {
332 	bool has_both_edge_trigger;
333 	bool needs_clk;
334 };
335 
336 static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
337 	.has_both_edge_trigger = false,
338 	.needs_clk = false,
339 };
340 
341 static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
342 	.has_both_edge_trigger = true,
343 	.needs_clk = true,
344 };
345 
346 static const struct of_device_id gpio_rcar_of_table[] = {
347 	{
348 		.compatible = "renesas,gpio-r8a7743",
349 		/* RZ/G1 GPIO is identical to R-Car Gen2. */
350 		.data = &gpio_rcar_info_gen2,
351 	}, {
352 		.compatible = "renesas,gpio-r8a7790",
353 		.data = &gpio_rcar_info_gen2,
354 	}, {
355 		.compatible = "renesas,gpio-r8a7791",
356 		.data = &gpio_rcar_info_gen2,
357 	}, {
358 		.compatible = "renesas,gpio-r8a7792",
359 		.data = &gpio_rcar_info_gen2,
360 	}, {
361 		.compatible = "renesas,gpio-r8a7793",
362 		.data = &gpio_rcar_info_gen2,
363 	}, {
364 		.compatible = "renesas,gpio-r8a7794",
365 		.data = &gpio_rcar_info_gen2,
366 	}, {
367 		.compatible = "renesas,gpio-r8a7795",
368 		/* Gen3 GPIO is identical to Gen2. */
369 		.data = &gpio_rcar_info_gen2,
370 	}, {
371 		.compatible = "renesas,gpio-r8a7796",
372 		/* Gen3 GPIO is identical to Gen2. */
373 		.data = &gpio_rcar_info_gen2,
374 	}, {
375 		.compatible = "renesas,rcar-gen1-gpio",
376 		.data = &gpio_rcar_info_gen1,
377 	}, {
378 		.compatible = "renesas,rcar-gen2-gpio",
379 		.data = &gpio_rcar_info_gen2,
380 	}, {
381 		.compatible = "renesas,rcar-gen3-gpio",
382 		/* Gen3 GPIO is identical to Gen2. */
383 		.data = &gpio_rcar_info_gen2,
384 	}, {
385 		.compatible = "renesas,gpio-rcar",
386 		.data = &gpio_rcar_info_gen1,
387 	}, {
388 		/* Terminator */
389 	},
390 };
391 
392 MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
393 
394 static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
395 {
396 	struct device_node *np = p->pdev->dev.of_node;
397 	const struct gpio_rcar_info *info;
398 	struct of_phandle_args args;
399 	int ret;
400 
401 	info = of_device_get_match_data(&p->pdev->dev);
402 
403 	ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
404 	*npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
405 	p->has_both_edge_trigger = info->has_both_edge_trigger;
406 	p->needs_clk = info->needs_clk;
407 
408 	if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) {
409 		dev_warn(&p->pdev->dev,
410 			 "Invalid number of gpio lines %u, using %u\n", *npins,
411 			 RCAR_MAX_GPIO_PER_BANK);
412 		*npins = RCAR_MAX_GPIO_PER_BANK;
413 	}
414 
415 	return 0;
416 }
417 
418 static int gpio_rcar_probe(struct platform_device *pdev)
419 {
420 	struct gpio_rcar_priv *p;
421 	struct resource *io, *irq;
422 	struct gpio_chip *gpio_chip;
423 	struct irq_chip *irq_chip;
424 	struct device *dev = &pdev->dev;
425 	const char *name = dev_name(dev);
426 	unsigned int npins;
427 	int ret;
428 
429 	p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
430 	if (!p)
431 		return -ENOMEM;
432 
433 	p->pdev = pdev;
434 	spin_lock_init(&p->lock);
435 
436 	/* Get device configuration from DT node */
437 	ret = gpio_rcar_parse_dt(p, &npins);
438 	if (ret < 0)
439 		return ret;
440 
441 	platform_set_drvdata(pdev, p);
442 
443 	p->clk = devm_clk_get(dev, NULL);
444 	if (IS_ERR(p->clk)) {
445 		if (p->needs_clk) {
446 			dev_err(dev, "unable to get clock\n");
447 			ret = PTR_ERR(p->clk);
448 			goto err0;
449 		}
450 		p->clk = NULL;
451 	}
452 
453 	pm_runtime_enable(dev);
454 
455 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
456 	if (!irq) {
457 		dev_err(dev, "missing IRQ\n");
458 		ret = -EINVAL;
459 		goto err0;
460 	}
461 
462 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
463 	p->base = devm_ioremap_resource(dev, io);
464 	if (IS_ERR(p->base)) {
465 		ret = PTR_ERR(p->base);
466 		goto err0;
467 	}
468 
469 	gpio_chip = &p->gpio_chip;
470 	gpio_chip->request = gpio_rcar_request;
471 	gpio_chip->free = gpio_rcar_free;
472 	gpio_chip->direction_input = gpio_rcar_direction_input;
473 	gpio_chip->get = gpio_rcar_get;
474 	gpio_chip->direction_output = gpio_rcar_direction_output;
475 	gpio_chip->set = gpio_rcar_set;
476 	gpio_chip->set_multiple = gpio_rcar_set_multiple;
477 	gpio_chip->label = name;
478 	gpio_chip->parent = dev;
479 	gpio_chip->owner = THIS_MODULE;
480 	gpio_chip->base = -1;
481 	gpio_chip->ngpio = npins;
482 
483 	irq_chip = &p->irq_chip;
484 	irq_chip->name = name;
485 	irq_chip->parent_device = dev;
486 	irq_chip->irq_mask = gpio_rcar_irq_disable;
487 	irq_chip->irq_unmask = gpio_rcar_irq_enable;
488 	irq_chip->irq_set_type = gpio_rcar_irq_set_type;
489 	irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
490 	irq_chip->flags	= IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
491 
492 	ret = gpiochip_add_data(gpio_chip, p);
493 	if (ret) {
494 		dev_err(dev, "failed to add GPIO controller\n");
495 		goto err0;
496 	}
497 
498 	ret = gpiochip_irqchip_add(gpio_chip, irq_chip, 0, handle_level_irq,
499 				   IRQ_TYPE_NONE);
500 	if (ret) {
501 		dev_err(dev, "cannot add irqchip\n");
502 		goto err1;
503 	}
504 
505 	p->irq_parent = irq->start;
506 	if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler,
507 			     IRQF_SHARED, name, p)) {
508 		dev_err(dev, "failed to request IRQ\n");
509 		ret = -ENOENT;
510 		goto err1;
511 	}
512 
513 	dev_info(dev, "driving %d GPIOs\n", npins);
514 
515 	return 0;
516 
517 err1:
518 	gpiochip_remove(gpio_chip);
519 err0:
520 	pm_runtime_disable(dev);
521 	return ret;
522 }
523 
524 static int gpio_rcar_remove(struct platform_device *pdev)
525 {
526 	struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
527 
528 	gpiochip_remove(&p->gpio_chip);
529 
530 	pm_runtime_disable(&pdev->dev);
531 	return 0;
532 }
533 
534 static struct platform_driver gpio_rcar_device_driver = {
535 	.probe		= gpio_rcar_probe,
536 	.remove		= gpio_rcar_remove,
537 	.driver		= {
538 		.name	= "gpio_rcar",
539 		.of_match_table = of_match_ptr(gpio_rcar_of_table),
540 	}
541 };
542 
543 module_platform_driver(gpio_rcar_device_driver);
544 
545 MODULE_AUTHOR("Magnus Damm");
546 MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
547 MODULE_LICENSE("GPL v2");
548