xref: /openbmc/linux/drivers/gpio/gpio-mlxbf2.c (revision a531b0c2)
1 // SPDX-License-Identifier: GPL-2.0
2 
3 /*
4  * Copyright (C) 2020-2021 NVIDIA CORPORATION & AFFILIATES
5  */
6 
7 #include <linux/bitfield.h>
8 #include <linux/bitops.h>
9 #include <linux/device.h>
10 #include <linux/gpio/driver.h>
11 #include <linux/interrupt.h>
12 #include <linux/io.h>
13 #include <linux/ioport.h>
14 #include <linux/kernel.h>
15 #include <linux/mod_devicetable.h>
16 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/pm.h>
19 #include <linux/resource.h>
20 #include <linux/spinlock.h>
21 #include <linux/types.h>
22 
23 /*
24  * There are 3 YU GPIO blocks:
25  * gpio[0]: HOST_GPIO0->HOST_GPIO31
26  * gpio[1]: HOST_GPIO32->HOST_GPIO63
27  * gpio[2]: HOST_GPIO64->HOST_GPIO69
28  */
29 #define MLXBF2_GPIO_MAX_PINS_PER_BLOCK 32
30 
31 /*
32  * arm_gpio_lock register:
33  * bit[31]	lock status: active if set
34  * bit[15:0]	set lock
35  * The lock is enabled only if 0xd42f is written to this field
36  */
37 #define YU_ARM_GPIO_LOCK_ADDR		0x2801088
38 #define YU_ARM_GPIO_LOCK_SIZE		0x8
39 #define YU_LOCK_ACTIVE_BIT(val)		(val >> 31)
40 #define YU_ARM_GPIO_LOCK_ACQUIRE	0xd42f
41 #define YU_ARM_GPIO_LOCK_RELEASE	0x0
42 
43 /*
44  * gpio[x] block registers and their offset
45  */
46 #define YU_GPIO_DATAIN			0x04
47 #define YU_GPIO_MODE1			0x08
48 #define YU_GPIO_MODE0			0x0c
49 #define YU_GPIO_DATASET			0x14
50 #define YU_GPIO_DATACLEAR		0x18
51 #define YU_GPIO_CAUSE_RISE_EN		0x44
52 #define YU_GPIO_CAUSE_FALL_EN		0x48
53 #define YU_GPIO_MODE1_CLEAR		0x50
54 #define YU_GPIO_MODE0_SET		0x54
55 #define YU_GPIO_MODE0_CLEAR		0x58
56 #define YU_GPIO_CAUSE_OR_CAUSE_EVTEN0	0x80
57 #define YU_GPIO_CAUSE_OR_EVTEN0		0x94
58 #define YU_GPIO_CAUSE_OR_CLRCAUSE	0x98
59 
60 struct mlxbf2_gpio_context_save_regs {
61 	u32 gpio_mode0;
62 	u32 gpio_mode1;
63 };
64 
65 /* BlueField-2 gpio block context structure. */
66 struct mlxbf2_gpio_context {
67 	struct gpio_chip gc;
68 	struct irq_chip irq_chip;
69 
70 	/* YU GPIO blocks address */
71 	void __iomem *gpio_io;
72 
73 	struct mlxbf2_gpio_context_save_regs *csave_regs;
74 };
75 
76 /* BlueField-2 gpio shared structure. */
77 struct mlxbf2_gpio_param {
78 	void __iomem *io;
79 	struct resource *res;
80 	struct mutex *lock;
81 };
82 
83 static struct resource yu_arm_gpio_lock_res =
84 	DEFINE_RES_MEM_NAMED(YU_ARM_GPIO_LOCK_ADDR, YU_ARM_GPIO_LOCK_SIZE, "YU_ARM_GPIO_LOCK");
85 
86 static DEFINE_MUTEX(yu_arm_gpio_lock_mutex);
87 
88 static struct mlxbf2_gpio_param yu_arm_gpio_lock_param = {
89 	.res = &yu_arm_gpio_lock_res,
90 	.lock = &yu_arm_gpio_lock_mutex,
91 };
92 
93 /* Request memory region and map yu_arm_gpio_lock resource */
94 static int mlxbf2_gpio_get_lock_res(struct platform_device *pdev)
95 {
96 	struct device *dev = &pdev->dev;
97 	struct resource *res;
98 	resource_size_t size;
99 	int ret = 0;
100 
101 	mutex_lock(yu_arm_gpio_lock_param.lock);
102 
103 	/* Check if the memory map already exists */
104 	if (yu_arm_gpio_lock_param.io)
105 		goto exit;
106 
107 	res = yu_arm_gpio_lock_param.res;
108 	size = resource_size(res);
109 
110 	if (!devm_request_mem_region(dev, res->start, size, res->name)) {
111 		ret = -EFAULT;
112 		goto exit;
113 	}
114 
115 	yu_arm_gpio_lock_param.io = devm_ioremap(dev, res->start, size);
116 	if (!yu_arm_gpio_lock_param.io)
117 		ret = -ENOMEM;
118 
119 exit:
120 	mutex_unlock(yu_arm_gpio_lock_param.lock);
121 
122 	return ret;
123 }
124 
125 /*
126  * Acquire the YU arm_gpio_lock to be able to change the direction
127  * mode. If the lock_active bit is already set, return an error.
128  */
129 static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs)
130 {
131 	u32 arm_gpio_lock_val;
132 
133 	mutex_lock(yu_arm_gpio_lock_param.lock);
134 	spin_lock(&gs->gc.bgpio_lock);
135 
136 	arm_gpio_lock_val = readl(yu_arm_gpio_lock_param.io);
137 
138 	/*
139 	 * When lock active bit[31] is set, ModeX is write enabled
140 	 */
141 	if (YU_LOCK_ACTIVE_BIT(arm_gpio_lock_val)) {
142 		spin_unlock(&gs->gc.bgpio_lock);
143 		mutex_unlock(yu_arm_gpio_lock_param.lock);
144 		return -EINVAL;
145 	}
146 
147 	writel(YU_ARM_GPIO_LOCK_ACQUIRE, yu_arm_gpio_lock_param.io);
148 
149 	return 0;
150 }
151 
152 /*
153  * Release the YU arm_gpio_lock after changing the direction mode.
154  */
155 static void mlxbf2_gpio_lock_release(struct mlxbf2_gpio_context *gs)
156 	__releases(&gs->gc.bgpio_lock)
157 	__releases(yu_arm_gpio_lock_param.lock)
158 {
159 	writel(YU_ARM_GPIO_LOCK_RELEASE, yu_arm_gpio_lock_param.io);
160 	spin_unlock(&gs->gc.bgpio_lock);
161 	mutex_unlock(yu_arm_gpio_lock_param.lock);
162 }
163 
164 /*
165  * mode0 and mode1 are both locked by the gpio_lock field.
166  *
167  * Together, mode0 and mode1 define the gpio Mode dependeing also
168  * on Reg_DataOut.
169  *
170  * {mode1,mode0}:{Reg_DataOut=0,Reg_DataOut=1}->{DataOut=0,DataOut=1}
171  *
172  * {0,0}:Reg_DataOut{0,1}->{Z,Z} Input PAD
173  * {0,1}:Reg_DataOut{0,1}->{0,1} Full drive Output PAD
174  * {1,0}:Reg_DataOut{0,1}->{0,Z} 0-set PAD to low, 1-float
175  * {1,1}:Reg_DataOut{0,1}->{Z,1} 0-float, 1-set PAD to high
176  */
177 
178 /*
179  * Set input direction:
180  * {mode1,mode0} = {0,0}
181  */
182 static int mlxbf2_gpio_direction_input(struct gpio_chip *chip,
183 				       unsigned int offset)
184 {
185 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
186 	int ret;
187 
188 	/*
189 	 * Although the arm_gpio_lock was set in the probe function, check again
190 	 * if it is still enabled to be able to write to the ModeX registers.
191 	 */
192 	ret = mlxbf2_gpio_lock_acquire(gs);
193 	if (ret < 0)
194 		return ret;
195 
196 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_CLEAR);
197 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
198 
199 	mlxbf2_gpio_lock_release(gs);
200 
201 	return ret;
202 }
203 
204 /*
205  * Set output direction:
206  * {mode1,mode0} = {0,1}
207  */
208 static int mlxbf2_gpio_direction_output(struct gpio_chip *chip,
209 					unsigned int offset,
210 					int value)
211 {
212 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
213 	int ret = 0;
214 
215 	/*
216 	 * Although the arm_gpio_lock was set in the probe function,
217 	 * check again it is still enabled to be able to write to the
218 	 * ModeX registers.
219 	 */
220 	ret = mlxbf2_gpio_lock_acquire(gs);
221 	if (ret < 0)
222 		return ret;
223 
224 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
225 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_SET);
226 
227 	mlxbf2_gpio_lock_release(gs);
228 
229 	return ret;
230 }
231 
232 static void mlxbf2_gpio_irq_enable(struct irq_data *irqd)
233 {
234 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
235 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
236 	int offset = irqd_to_hwirq(irqd);
237 	unsigned long flags;
238 	u32 val;
239 
240 	spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
241 	val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
242 	val |= BIT(offset);
243 	writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
244 
245 	val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
246 	val |= BIT(offset);
247 	writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
248 	spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
249 }
250 
251 static void mlxbf2_gpio_irq_disable(struct irq_data *irqd)
252 {
253 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
254 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
255 	int offset = irqd_to_hwirq(irqd);
256 	unsigned long flags;
257 	u32 val;
258 
259 	spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
260 	val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
261 	val &= ~BIT(offset);
262 	writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
263 	spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
264 }
265 
266 static irqreturn_t mlxbf2_gpio_irq_handler(int irq, void *ptr)
267 {
268 	struct mlxbf2_gpio_context *gs = ptr;
269 	struct gpio_chip *gc = &gs->gc;
270 	unsigned long pending;
271 	u32 level;
272 
273 	pending = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_CAUSE_EVTEN0);
274 	writel(pending, gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
275 
276 	for_each_set_bit(level, &pending, gc->ngpio) {
277 		int gpio_irq = irq_find_mapping(gc->irq.domain, level);
278 		generic_handle_irq(gpio_irq);
279 	}
280 
281 	return IRQ_RETVAL(pending);
282 }
283 
284 static int
285 mlxbf2_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
286 {
287 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
288 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
289 	int offset = irqd_to_hwirq(irqd);
290 	unsigned long flags;
291 	bool fall = false;
292 	bool rise = false;
293 	u32 val;
294 
295 	switch (type & IRQ_TYPE_SENSE_MASK) {
296 	case IRQ_TYPE_EDGE_BOTH:
297 		fall = true;
298 		rise = true;
299 		break;
300 	case IRQ_TYPE_EDGE_RISING:
301 		rise = true;
302 		break;
303 	case IRQ_TYPE_EDGE_FALLING:
304 		fall = true;
305 		break;
306 	default:
307 		return -EINVAL;
308 	}
309 
310 	spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
311 	if (fall) {
312 		val = readl(gs->gpio_io + YU_GPIO_CAUSE_FALL_EN);
313 		val |= BIT(offset);
314 		writel(val, gs->gpio_io + YU_GPIO_CAUSE_FALL_EN);
315 	}
316 
317 	if (rise) {
318 		val = readl(gs->gpio_io + YU_GPIO_CAUSE_RISE_EN);
319 		val |= BIT(offset);
320 		writel(val, gs->gpio_io + YU_GPIO_CAUSE_RISE_EN);
321 	}
322 	spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
323 
324 	return 0;
325 }
326 
327 /* BlueField-2 GPIO driver initialization routine. */
328 static int
329 mlxbf2_gpio_probe(struct platform_device *pdev)
330 {
331 	struct mlxbf2_gpio_context *gs;
332 	struct device *dev = &pdev->dev;
333 	struct gpio_irq_chip *girq;
334 	struct gpio_chip *gc;
335 	unsigned int npins;
336 	const char *name;
337 	int ret, irq;
338 
339 	name = dev_name(dev);
340 
341 	gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
342 	if (!gs)
343 		return -ENOMEM;
344 
345 	/* YU GPIO block address */
346 	gs->gpio_io = devm_platform_ioremap_resource(pdev, 0);
347 	if (IS_ERR(gs->gpio_io))
348 		return PTR_ERR(gs->gpio_io);
349 
350 	ret = mlxbf2_gpio_get_lock_res(pdev);
351 	if (ret) {
352 		dev_err(dev, "Failed to get yu_arm_gpio_lock resource\n");
353 		return ret;
354 	}
355 
356 	if (device_property_read_u32(dev, "npins", &npins))
357 		npins = MLXBF2_GPIO_MAX_PINS_PER_BLOCK;
358 
359 	gc = &gs->gc;
360 
361 	ret = bgpio_init(gc, dev, 4,
362 			gs->gpio_io + YU_GPIO_DATAIN,
363 			gs->gpio_io + YU_GPIO_DATASET,
364 			gs->gpio_io + YU_GPIO_DATACLEAR,
365 			NULL,
366 			NULL,
367 			0);
368 
369 	if (ret) {
370 		dev_err(dev, "bgpio_init failed\n");
371 		return ret;
372 	}
373 
374 	gc->direction_input = mlxbf2_gpio_direction_input;
375 	gc->direction_output = mlxbf2_gpio_direction_output;
376 	gc->ngpio = npins;
377 	gc->owner = THIS_MODULE;
378 
379 	irq = platform_get_irq(pdev, 0);
380 	if (irq >= 0) {
381 		gs->irq_chip.name = name;
382 		gs->irq_chip.irq_set_type = mlxbf2_gpio_irq_set_type;
383 		gs->irq_chip.irq_enable = mlxbf2_gpio_irq_enable;
384 		gs->irq_chip.irq_disable = mlxbf2_gpio_irq_disable;
385 
386 		girq = &gs->gc.irq;
387 		girq->chip = &gs->irq_chip;
388 		girq->handler = handle_simple_irq;
389 		girq->default_type = IRQ_TYPE_NONE;
390 		/* This will let us handle the parent IRQ in the driver */
391 		girq->num_parents = 0;
392 		girq->parents = NULL;
393 		girq->parent_handler = NULL;
394 
395 		/*
396 		 * Directly request the irq here instead of passing
397 		 * a flow-handler because the irq is shared.
398 		 */
399 		ret = devm_request_irq(dev, irq, mlxbf2_gpio_irq_handler,
400 				       IRQF_SHARED, name, gs);
401 		if (ret) {
402 			dev_err(dev, "failed to request IRQ");
403 			return ret;
404 		}
405 	}
406 
407 	platform_set_drvdata(pdev, gs);
408 
409 	ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
410 	if (ret) {
411 		dev_err(dev, "Failed adding memory mapped gpiochip\n");
412 		return ret;
413 	}
414 
415 	return 0;
416 }
417 
418 static int __maybe_unused mlxbf2_gpio_suspend(struct device *dev)
419 {
420 	struct mlxbf2_gpio_context *gs = dev_get_drvdata(dev);
421 
422 	gs->csave_regs->gpio_mode0 = readl(gs->gpio_io +
423 		YU_GPIO_MODE0);
424 	gs->csave_regs->gpio_mode1 = readl(gs->gpio_io +
425 		YU_GPIO_MODE1);
426 
427 	return 0;
428 }
429 
430 static int __maybe_unused mlxbf2_gpio_resume(struct device *dev)
431 {
432 	struct mlxbf2_gpio_context *gs = dev_get_drvdata(dev);
433 
434 	writel(gs->csave_regs->gpio_mode0, gs->gpio_io +
435 		YU_GPIO_MODE0);
436 	writel(gs->csave_regs->gpio_mode1, gs->gpio_io +
437 		YU_GPIO_MODE1);
438 
439 	return 0;
440 }
441 static SIMPLE_DEV_PM_OPS(mlxbf2_pm_ops, mlxbf2_gpio_suspend, mlxbf2_gpio_resume);
442 
443 static const struct acpi_device_id __maybe_unused mlxbf2_gpio_acpi_match[] = {
444 	{ "MLNXBF22", 0 },
445 	{},
446 };
447 MODULE_DEVICE_TABLE(acpi, mlxbf2_gpio_acpi_match);
448 
449 static struct platform_driver mlxbf2_gpio_driver = {
450 	.driver = {
451 		.name = "mlxbf2_gpio",
452 		.acpi_match_table = mlxbf2_gpio_acpi_match,
453 		.pm = &mlxbf2_pm_ops,
454 	},
455 	.probe    = mlxbf2_gpio_probe,
456 };
457 
458 module_platform_driver(mlxbf2_gpio_driver);
459 
460 MODULE_DESCRIPTION("Mellanox BlueField-2 GPIO Driver");
461 MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
462 MODULE_LICENSE("GPL v2");
463