xref: /openbmc/linux/drivers/gpio/gpio-mlxbf2.c (revision 5bfff76d)
1 // SPDX-License-Identifier: GPL-2.0
2 
3 /*
4  * Copyright (C) 2020-2021 NVIDIA CORPORATION & AFFILIATES
5  */
6 
7 #include <linux/bitfield.h>
8 #include <linux/bitops.h>
9 #include <linux/device.h>
10 #include <linux/gpio/driver.h>
11 #include <linux/interrupt.h>
12 #include <linux/io.h>
13 #include <linux/ioport.h>
14 #include <linux/kernel.h>
15 #include <linux/mod_devicetable.h>
16 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/pm.h>
19 #include <linux/resource.h>
20 #include <linux/seq_file.h>
21 #include <linux/spinlock.h>
22 #include <linux/types.h>
23 
24 /*
25  * There are 3 YU GPIO blocks:
26  * gpio[0]: HOST_GPIO0->HOST_GPIO31
27  * gpio[1]: HOST_GPIO32->HOST_GPIO63
28  * gpio[2]: HOST_GPIO64->HOST_GPIO69
29  */
30 #define MLXBF2_GPIO_MAX_PINS_PER_BLOCK 32
31 
32 /*
33  * arm_gpio_lock register:
34  * bit[31]	lock status: active if set
35  * bit[15:0]	set lock
36  * The lock is enabled only if 0xd42f is written to this field
37  */
38 #define YU_ARM_GPIO_LOCK_ADDR		0x2801088
39 #define YU_ARM_GPIO_LOCK_SIZE		0x8
40 #define YU_LOCK_ACTIVE_BIT(val)		(val >> 31)
41 #define YU_ARM_GPIO_LOCK_ACQUIRE	0xd42f
42 #define YU_ARM_GPIO_LOCK_RELEASE	0x0
43 
44 /*
45  * gpio[x] block registers and their offset
46  */
47 #define YU_GPIO_DATAIN			0x04
48 #define YU_GPIO_MODE1			0x08
49 #define YU_GPIO_MODE0			0x0c
50 #define YU_GPIO_DATASET			0x14
51 #define YU_GPIO_DATACLEAR		0x18
52 #define YU_GPIO_CAUSE_RISE_EN		0x44
53 #define YU_GPIO_CAUSE_FALL_EN		0x48
54 #define YU_GPIO_MODE1_CLEAR		0x50
55 #define YU_GPIO_MODE0_SET		0x54
56 #define YU_GPIO_MODE0_CLEAR		0x58
57 #define YU_GPIO_CAUSE_OR_CAUSE_EVTEN0	0x80
58 #define YU_GPIO_CAUSE_OR_EVTEN0		0x94
59 #define YU_GPIO_CAUSE_OR_CLRCAUSE	0x98
60 
61 struct mlxbf2_gpio_context_save_regs {
62 	u32 gpio_mode0;
63 	u32 gpio_mode1;
64 };
65 
66 /* BlueField-2 gpio block context structure. */
67 struct mlxbf2_gpio_context {
68 	struct gpio_chip gc;
69 
70 	/* YU GPIO blocks address */
71 	void __iomem *gpio_io;
72 	struct device *dev;
73 
74 	struct mlxbf2_gpio_context_save_regs *csave_regs;
75 };
76 
77 /* BlueField-2 gpio shared structure. */
78 struct mlxbf2_gpio_param {
79 	void __iomem *io;
80 	struct resource *res;
81 	struct mutex *lock;
82 };
83 
84 static struct resource yu_arm_gpio_lock_res =
85 	DEFINE_RES_MEM_NAMED(YU_ARM_GPIO_LOCK_ADDR, YU_ARM_GPIO_LOCK_SIZE, "YU_ARM_GPIO_LOCK");
86 
87 static DEFINE_MUTEX(yu_arm_gpio_lock_mutex);
88 
89 static struct mlxbf2_gpio_param yu_arm_gpio_lock_param = {
90 	.res = &yu_arm_gpio_lock_res,
91 	.lock = &yu_arm_gpio_lock_mutex,
92 };
93 
94 /* Request memory region and map yu_arm_gpio_lock resource */
mlxbf2_gpio_get_lock_res(struct platform_device * pdev)95 static int mlxbf2_gpio_get_lock_res(struct platform_device *pdev)
96 {
97 	struct device *dev = &pdev->dev;
98 	struct resource *res;
99 	resource_size_t size;
100 	int ret = 0;
101 
102 	mutex_lock(yu_arm_gpio_lock_param.lock);
103 
104 	/* Check if the memory map already exists */
105 	if (yu_arm_gpio_lock_param.io)
106 		goto exit;
107 
108 	res = yu_arm_gpio_lock_param.res;
109 	size = resource_size(res);
110 
111 	if (!devm_request_mem_region(dev, res->start, size, res->name)) {
112 		ret = -EFAULT;
113 		goto exit;
114 	}
115 
116 	yu_arm_gpio_lock_param.io = devm_ioremap(dev, res->start, size);
117 	if (!yu_arm_gpio_lock_param.io)
118 		ret = -ENOMEM;
119 
120 exit:
121 	mutex_unlock(yu_arm_gpio_lock_param.lock);
122 
123 	return ret;
124 }
125 
126 /*
127  * Acquire the YU arm_gpio_lock to be able to change the direction
128  * mode. If the lock_active bit is already set, return an error.
129  */
mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context * gs)130 static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs)
131 {
132 	u32 arm_gpio_lock_val;
133 
134 	mutex_lock(yu_arm_gpio_lock_param.lock);
135 	raw_spin_lock(&gs->gc.bgpio_lock);
136 
137 	arm_gpio_lock_val = readl(yu_arm_gpio_lock_param.io);
138 
139 	/*
140 	 * When lock active bit[31] is set, ModeX is write enabled
141 	 */
142 	if (YU_LOCK_ACTIVE_BIT(arm_gpio_lock_val)) {
143 		raw_spin_unlock(&gs->gc.bgpio_lock);
144 		mutex_unlock(yu_arm_gpio_lock_param.lock);
145 		return -EINVAL;
146 	}
147 
148 	writel(YU_ARM_GPIO_LOCK_ACQUIRE, yu_arm_gpio_lock_param.io);
149 
150 	return 0;
151 }
152 
153 /*
154  * Release the YU arm_gpio_lock after changing the direction mode.
155  */
mlxbf2_gpio_lock_release(struct mlxbf2_gpio_context * gs)156 static void mlxbf2_gpio_lock_release(struct mlxbf2_gpio_context *gs)
157 	__releases(&gs->gc.bgpio_lock)
158 	__releases(yu_arm_gpio_lock_param.lock)
159 {
160 	writel(YU_ARM_GPIO_LOCK_RELEASE, yu_arm_gpio_lock_param.io);
161 	raw_spin_unlock(&gs->gc.bgpio_lock);
162 	mutex_unlock(yu_arm_gpio_lock_param.lock);
163 }
164 
165 /*
166  * mode0 and mode1 are both locked by the gpio_lock field.
167  *
168  * Together, mode0 and mode1 define the gpio Mode dependeing also
169  * on Reg_DataOut.
170  *
171  * {mode1,mode0}:{Reg_DataOut=0,Reg_DataOut=1}->{DataOut=0,DataOut=1}
172  *
173  * {0,0}:Reg_DataOut{0,1}->{Z,Z} Input PAD
174  * {0,1}:Reg_DataOut{0,1}->{0,1} Full drive Output PAD
175  * {1,0}:Reg_DataOut{0,1}->{0,Z} 0-set PAD to low, 1-float
176  * {1,1}:Reg_DataOut{0,1}->{Z,1} 0-float, 1-set PAD to high
177  */
178 
179 /*
180  * Set input direction:
181  * {mode1,mode0} = {0,0}
182  */
mlxbf2_gpio_direction_input(struct gpio_chip * chip,unsigned int offset)183 static int mlxbf2_gpio_direction_input(struct gpio_chip *chip,
184 				       unsigned int offset)
185 {
186 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
187 	int ret;
188 
189 	/*
190 	 * Although the arm_gpio_lock was set in the probe function, check again
191 	 * if it is still enabled to be able to write to the ModeX registers.
192 	 */
193 	ret = mlxbf2_gpio_lock_acquire(gs);
194 	if (ret < 0)
195 		return ret;
196 
197 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_CLEAR);
198 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
199 
200 	mlxbf2_gpio_lock_release(gs);
201 
202 	return ret;
203 }
204 
205 /*
206  * Set output direction:
207  * {mode1,mode0} = {0,1}
208  */
mlxbf2_gpio_direction_output(struct gpio_chip * chip,unsigned int offset,int value)209 static int mlxbf2_gpio_direction_output(struct gpio_chip *chip,
210 					unsigned int offset,
211 					int value)
212 {
213 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
214 	int ret = 0;
215 
216 	/*
217 	 * Although the arm_gpio_lock was set in the probe function,
218 	 * check again it is still enabled to be able to write to the
219 	 * ModeX registers.
220 	 */
221 	ret = mlxbf2_gpio_lock_acquire(gs);
222 	if (ret < 0)
223 		return ret;
224 
225 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
226 	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_SET);
227 
228 	mlxbf2_gpio_lock_release(gs);
229 
230 	return ret;
231 }
232 
mlxbf2_gpio_irq_enable(struct irq_data * irqd)233 static void mlxbf2_gpio_irq_enable(struct irq_data *irqd)
234 {
235 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
236 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
237 	int offset = irqd_to_hwirq(irqd);
238 	unsigned long flags;
239 	u32 val;
240 
241 	gpiochip_enable_irq(gc, irqd_to_hwirq(irqd));
242 	raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
243 	val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
244 	val |= BIT(offset);
245 	writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
246 
247 	val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
248 	val |= BIT(offset);
249 	writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
250 	raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
251 }
252 
mlxbf2_gpio_irq_disable(struct irq_data * irqd)253 static void mlxbf2_gpio_irq_disable(struct irq_data *irqd)
254 {
255 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
256 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
257 	int offset = irqd_to_hwirq(irqd);
258 	unsigned long flags;
259 	u32 val;
260 
261 	raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
262 	val = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
263 	val &= ~BIT(offset);
264 	writel(val, gs->gpio_io + YU_GPIO_CAUSE_OR_EVTEN0);
265 	raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
266 	gpiochip_disable_irq(gc, irqd_to_hwirq(irqd));
267 }
268 
mlxbf2_gpio_irq_handler(int irq,void * ptr)269 static irqreturn_t mlxbf2_gpio_irq_handler(int irq, void *ptr)
270 {
271 	struct mlxbf2_gpio_context *gs = ptr;
272 	struct gpio_chip *gc = &gs->gc;
273 	unsigned long pending;
274 	u32 level;
275 
276 	pending = readl(gs->gpio_io + YU_GPIO_CAUSE_OR_CAUSE_EVTEN0);
277 	writel(pending, gs->gpio_io + YU_GPIO_CAUSE_OR_CLRCAUSE);
278 
279 	for_each_set_bit(level, &pending, gc->ngpio)
280 		generic_handle_domain_irq_safe(gc->irq.domain, level);
281 
282 	return IRQ_RETVAL(pending);
283 }
284 
285 static int
mlxbf2_gpio_irq_set_type(struct irq_data * irqd,unsigned int type)286 mlxbf2_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
287 {
288 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
289 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
290 	int offset = irqd_to_hwirq(irqd);
291 	unsigned long flags;
292 	bool fall = false;
293 	bool rise = false;
294 	u32 val;
295 
296 	switch (type & IRQ_TYPE_SENSE_MASK) {
297 	case IRQ_TYPE_EDGE_BOTH:
298 		fall = true;
299 		rise = true;
300 		break;
301 	case IRQ_TYPE_EDGE_RISING:
302 		rise = true;
303 		break;
304 	case IRQ_TYPE_EDGE_FALLING:
305 		fall = true;
306 		break;
307 	default:
308 		return -EINVAL;
309 	}
310 
311 	raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags);
312 	if (fall) {
313 		val = readl(gs->gpio_io + YU_GPIO_CAUSE_FALL_EN);
314 		val |= BIT(offset);
315 		writel(val, gs->gpio_io + YU_GPIO_CAUSE_FALL_EN);
316 	}
317 
318 	if (rise) {
319 		val = readl(gs->gpio_io + YU_GPIO_CAUSE_RISE_EN);
320 		val |= BIT(offset);
321 		writel(val, gs->gpio_io + YU_GPIO_CAUSE_RISE_EN);
322 	}
323 	raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags);
324 
325 	return 0;
326 }
327 
mlxbf2_gpio_irq_print_chip(struct irq_data * irqd,struct seq_file * p)328 static void mlxbf2_gpio_irq_print_chip(struct irq_data *irqd,
329 				       struct seq_file *p)
330 {
331 	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
332 	struct mlxbf2_gpio_context *gs = gpiochip_get_data(gc);
333 
334 	seq_printf(p, dev_name(gs->dev));
335 }
336 
337 static const struct irq_chip mlxbf2_gpio_irq_chip = {
338 	.irq_set_type = mlxbf2_gpio_irq_set_type,
339 	.irq_enable = mlxbf2_gpio_irq_enable,
340 	.irq_disable = mlxbf2_gpio_irq_disable,
341 	.irq_print_chip = mlxbf2_gpio_irq_print_chip,
342 	.flags = IRQCHIP_IMMUTABLE,
343 	GPIOCHIP_IRQ_RESOURCE_HELPERS,
344 };
345 
346 /* BlueField-2 GPIO driver initialization routine. */
347 static int
mlxbf2_gpio_probe(struct platform_device * pdev)348 mlxbf2_gpio_probe(struct platform_device *pdev)
349 {
350 	struct mlxbf2_gpio_context *gs;
351 	struct device *dev = &pdev->dev;
352 	struct gpio_irq_chip *girq;
353 	struct gpio_chip *gc;
354 	unsigned int npins;
355 	const char *name;
356 	int ret, irq;
357 
358 	name = dev_name(dev);
359 
360 	gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
361 	if (!gs)
362 		return -ENOMEM;
363 
364 	gs->dev = dev;
365 
366 	/* YU GPIO block address */
367 	gs->gpio_io = devm_platform_ioremap_resource(pdev, 0);
368 	if (IS_ERR(gs->gpio_io))
369 		return PTR_ERR(gs->gpio_io);
370 
371 	ret = mlxbf2_gpio_get_lock_res(pdev);
372 	if (ret) {
373 		dev_err(dev, "Failed to get yu_arm_gpio_lock resource\n");
374 		return ret;
375 	}
376 
377 	if (device_property_read_u32(dev, "npins", &npins))
378 		npins = MLXBF2_GPIO_MAX_PINS_PER_BLOCK;
379 
380 	gc = &gs->gc;
381 
382 	ret = bgpio_init(gc, dev, 4,
383 			gs->gpio_io + YU_GPIO_DATAIN,
384 			gs->gpio_io + YU_GPIO_DATASET,
385 			gs->gpio_io + YU_GPIO_DATACLEAR,
386 			NULL,
387 			NULL,
388 			0);
389 
390 	if (ret) {
391 		dev_err(dev, "bgpio_init failed\n");
392 		return ret;
393 	}
394 
395 	gc->direction_input = mlxbf2_gpio_direction_input;
396 	gc->direction_output = mlxbf2_gpio_direction_output;
397 	gc->ngpio = npins;
398 	gc->owner = THIS_MODULE;
399 
400 	irq = platform_get_irq(pdev, 0);
401 	if (irq >= 0) {
402 		girq = &gs->gc.irq;
403 		gpio_irq_chip_set_chip(girq, &mlxbf2_gpio_irq_chip);
404 		girq->handler = handle_simple_irq;
405 		girq->default_type = IRQ_TYPE_NONE;
406 		/* This will let us handle the parent IRQ in the driver */
407 		girq->num_parents = 0;
408 		girq->parents = NULL;
409 		girq->parent_handler = NULL;
410 
411 		/*
412 		 * Directly request the irq here instead of passing
413 		 * a flow-handler because the irq is shared.
414 		 */
415 		ret = devm_request_irq(dev, irq, mlxbf2_gpio_irq_handler,
416 				       IRQF_SHARED, name, gs);
417 		if (ret) {
418 			dev_err(dev, "failed to request IRQ");
419 			return ret;
420 		}
421 	}
422 
423 	platform_set_drvdata(pdev, gs);
424 
425 	ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
426 	if (ret) {
427 		dev_err(dev, "Failed adding memory mapped gpiochip\n");
428 		return ret;
429 	}
430 
431 	return 0;
432 }
433 
mlxbf2_gpio_suspend(struct device * dev)434 static int __maybe_unused mlxbf2_gpio_suspend(struct device *dev)
435 {
436 	struct mlxbf2_gpio_context *gs = dev_get_drvdata(dev);
437 
438 	gs->csave_regs->gpio_mode0 = readl(gs->gpio_io +
439 		YU_GPIO_MODE0);
440 	gs->csave_regs->gpio_mode1 = readl(gs->gpio_io +
441 		YU_GPIO_MODE1);
442 
443 	return 0;
444 }
445 
mlxbf2_gpio_resume(struct device * dev)446 static int __maybe_unused mlxbf2_gpio_resume(struct device *dev)
447 {
448 	struct mlxbf2_gpio_context *gs = dev_get_drvdata(dev);
449 
450 	writel(gs->csave_regs->gpio_mode0, gs->gpio_io +
451 		YU_GPIO_MODE0);
452 	writel(gs->csave_regs->gpio_mode1, gs->gpio_io +
453 		YU_GPIO_MODE1);
454 
455 	return 0;
456 }
457 static SIMPLE_DEV_PM_OPS(mlxbf2_pm_ops, mlxbf2_gpio_suspend, mlxbf2_gpio_resume);
458 
459 static const struct acpi_device_id __maybe_unused mlxbf2_gpio_acpi_match[] = {
460 	{ "MLNXBF22", 0 },
461 	{},
462 };
463 MODULE_DEVICE_TABLE(acpi, mlxbf2_gpio_acpi_match);
464 
465 static struct platform_driver mlxbf2_gpio_driver = {
466 	.driver = {
467 		.name = "mlxbf2_gpio",
468 		.acpi_match_table = mlxbf2_gpio_acpi_match,
469 		.pm = &mlxbf2_pm_ops,
470 	},
471 	.probe    = mlxbf2_gpio_probe,
472 };
473 
474 module_platform_driver(mlxbf2_gpio_driver);
475 
476 MODULE_DESCRIPTION("Mellanox BlueField-2 GPIO Driver");
477 MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
478 MODULE_LICENSE("GPL v2");
479