xref: /openbmc/linux/drivers/gpio/gpio-mc33880.c (revision ca79522c)
1 /*
2  * MC33880 high-side/low-side switch GPIO driver
3  * Copyright (c) 2009 Intel Corporation
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License version 2 as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17  */
18 
19 /* Supports:
20  * Freescale MC33880 high-side/low-side switch
21  */
22 
23 #include <linux/init.h>
24 #include <linux/mutex.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/mc33880.h>
27 #include <linux/gpio.h>
28 #include <linux/slab.h>
29 #include <linux/module.h>
30 
31 #define DRIVER_NAME "mc33880"
32 
33 /*
34  * Pin configurations, see MAX7301 datasheet page 6
35  */
36 #define PIN_CONFIG_MASK 0x03
37 #define PIN_CONFIG_IN_PULLUP 0x03
38 #define PIN_CONFIG_IN_WO_PULLUP 0x02
39 #define PIN_CONFIG_OUT 0x01
40 
41 #define PIN_NUMBER 8
42 
43 
44 /*
45  * Some registers must be read back to modify.
46  * To save time we cache them here in memory
47  */
48 struct mc33880 {
49 	struct mutex	lock;	/* protect from simultaneous accesses */
50 	u8		port_config;
51 	struct gpio_chip chip;
52 	struct spi_device *spi;
53 };
54 
55 static int mc33880_write_config(struct mc33880 *mc)
56 {
57 	return spi_write(mc->spi, &mc->port_config, sizeof(mc->port_config));
58 }
59 
60 
61 static int __mc33880_set(struct mc33880 *mc, unsigned offset, int value)
62 {
63 	if (value)
64 		mc->port_config |= 1 << offset;
65 	else
66 		mc->port_config &= ~(1 << offset);
67 
68 	return mc33880_write_config(mc);
69 }
70 
71 
72 static void mc33880_set(struct gpio_chip *chip, unsigned offset, int value)
73 {
74 	struct mc33880 *mc = container_of(chip, struct mc33880, chip);
75 
76 	mutex_lock(&mc->lock);
77 
78 	__mc33880_set(mc, offset, value);
79 
80 	mutex_unlock(&mc->lock);
81 }
82 
83 static int mc33880_probe(struct spi_device *spi)
84 {
85 	struct mc33880 *mc;
86 	struct mc33880_platform_data *pdata;
87 	int ret;
88 
89 	pdata = spi->dev.platform_data;
90 	if (!pdata || !pdata->base) {
91 		dev_dbg(&spi->dev, "incorrect or missing platform data\n");
92 		return -EINVAL;
93 	}
94 
95 	/*
96 	 * bits_per_word cannot be configured in platform data
97 	 */
98 	spi->bits_per_word = 8;
99 
100 	ret = spi_setup(spi);
101 	if (ret < 0)
102 		return ret;
103 
104 	mc = devm_kzalloc(&spi->dev, sizeof(struct mc33880), GFP_KERNEL);
105 	if (!mc)
106 		return -ENOMEM;
107 
108 	mutex_init(&mc->lock);
109 
110 	spi_set_drvdata(spi, mc);
111 
112 	mc->spi = spi;
113 
114 	mc->chip.label = DRIVER_NAME,
115 	mc->chip.set = mc33880_set;
116 	mc->chip.base = pdata->base;
117 	mc->chip.ngpio = PIN_NUMBER;
118 	mc->chip.can_sleep = 1;
119 	mc->chip.dev = &spi->dev;
120 	mc->chip.owner = THIS_MODULE;
121 
122 	mc->port_config = 0x00;
123 	/* write twice, because during initialisation the first setting
124 	 * is just for testing SPI communication, and the second is the
125 	 * "real" configuration
126 	 */
127 	ret = mc33880_write_config(mc);
128 	mc->port_config = 0x00;
129 	if (!ret)
130 		ret = mc33880_write_config(mc);
131 
132 	if (ret) {
133 		dev_err(&spi->dev, "Failed writing to " DRIVER_NAME ": %d\n",
134 			ret);
135 		goto exit_destroy;
136 	}
137 
138 	ret = gpiochip_add(&mc->chip);
139 	if (ret)
140 		goto exit_destroy;
141 
142 	return ret;
143 
144 exit_destroy:
145 	spi_set_drvdata(spi, NULL);
146 	mutex_destroy(&mc->lock);
147 	return ret;
148 }
149 
150 static int mc33880_remove(struct spi_device *spi)
151 {
152 	struct mc33880 *mc;
153 	int ret;
154 
155 	mc = spi_get_drvdata(spi);
156 	if (mc == NULL)
157 		return -ENODEV;
158 
159 	spi_set_drvdata(spi, NULL);
160 
161 	ret = gpiochip_remove(&mc->chip);
162 	if (!ret)
163 		mutex_destroy(&mc->lock);
164 	else
165 		dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
166 			ret);
167 
168 	return ret;
169 }
170 
171 static struct spi_driver mc33880_driver = {
172 	.driver = {
173 		.name		= DRIVER_NAME,
174 		.owner		= THIS_MODULE,
175 	},
176 	.probe		= mc33880_probe,
177 	.remove		= mc33880_remove,
178 };
179 
180 static int __init mc33880_init(void)
181 {
182 	return spi_register_driver(&mc33880_driver);
183 }
184 /* register after spi postcore initcall and before
185  * subsys initcalls that may rely on these GPIOs
186  */
187 subsys_initcall(mc33880_init);
188 
189 static void __exit mc33880_exit(void)
190 {
191 	spi_unregister_driver(&mc33880_driver);
192 }
193 module_exit(mc33880_exit);
194 
195 MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
196 MODULE_LICENSE("GPL v2");
197 
198