xref: /openbmc/linux/drivers/gpio/gpio-max7301.c (revision a61127c2)
1 /*
2  * Copyright (C) 2006 Juergen Beisert, Pengutronix
3  * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
4  * Copyright (C) 2009 Wolfram Sang, Pengutronix
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  * Check max730x.c for further details.
11  */
12 
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/mutex.h>
17 #include <linux/slab.h>
18 #include <linux/spi/spi.h>
19 #include <linux/spi/max7301.h>
20 
21 /* A write to the MAX7301 means one message with one transfer */
22 static int max7301_spi_write(struct device *dev, unsigned int reg,
23 				unsigned int val)
24 {
25 	struct spi_device *spi = to_spi_device(dev);
26 	u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
27 
28 	return spi_write_then_read(spi, &word, sizeof(word), NULL, 0);
29 }
30 
31 /* A read from the MAX7301 means two transfers; here, one message each */
32 
33 static int max7301_spi_read(struct device *dev, unsigned int reg)
34 {
35 	int ret;
36 	u16 word;
37 	struct spi_device *spi = to_spi_device(dev);
38 
39 	word = 0x8000 | (reg << 8);
40 	ret = spi_write_then_read(spi, &word, sizeof(word), &word,
41 				  sizeof(word));
42 	if (ret)
43 		return ret;
44 	return word & 0xff;
45 }
46 
47 static int max7301_probe(struct spi_device *spi)
48 {
49 	struct max7301 *ts;
50 	int ret;
51 
52 	/* bits_per_word cannot be configured in platform data */
53 	spi->bits_per_word = 16;
54 	ret = spi_setup(spi);
55 	if (ret < 0)
56 		return ret;
57 
58 	ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL);
59 	if (!ts)
60 		return -ENOMEM;
61 
62 	ts->read = max7301_spi_read;
63 	ts->write = max7301_spi_write;
64 	ts->dev = &spi->dev;
65 
66 	ret = __max730x_probe(ts);
67 	return ret;
68 }
69 
70 static int max7301_remove(struct spi_device *spi)
71 {
72 	return __max730x_remove(&spi->dev);
73 }
74 
75 static const struct spi_device_id max7301_id[] = {
76 	{ "max7301", 0 },
77 	{ }
78 };
79 MODULE_DEVICE_TABLE(spi, max7301_id);
80 
81 static struct spi_driver max7301_driver = {
82 	.driver = {
83 		.name = "max7301",
84 	},
85 	.probe = max7301_probe,
86 	.remove = max7301_remove,
87 	.id_table = max7301_id,
88 };
89 
90 static int __init max7301_init(void)
91 {
92 	return spi_register_driver(&max7301_driver);
93 }
94 /* register after spi postcore initcall and before
95  * subsys initcalls that may rely on these GPIOs
96  */
97 subsys_initcall(max7301_init);
98 
99 static void __exit max7301_exit(void)
100 {
101 	spi_unregister_driver(&max7301_driver);
102 }
103 module_exit(max7301_exit);
104 
105 MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
106 MODULE_LICENSE("GPL v2");
107 MODULE_DESCRIPTION("MAX7301 GPIO-Expander");
108