xref: /openbmc/linux/drivers/gpio/gpio-max7301.c (revision 39b6f3aa)
1 /*
2  * Copyright (C) 2006 Juergen Beisert, Pengutronix
3  * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
4  * Copyright (C) 2009 Wolfram Sang, Pengutronix
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  * Check max730x.c for further details.
11  */
12 
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/mutex.h>
17 #include <linux/slab.h>
18 #include <linux/spi/spi.h>
19 #include <linux/spi/max7301.h>
20 
21 /* A write to the MAX7301 means one message with one transfer */
22 static int max7301_spi_write(struct device *dev, unsigned int reg,
23 				unsigned int val)
24 {
25 	struct spi_device *spi = to_spi_device(dev);
26 	u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
27 
28 	return spi_write(spi, (const u8 *)&word, sizeof(word));
29 }
30 
31 /* A read from the MAX7301 means two transfers; here, one message each */
32 
33 static int max7301_spi_read(struct device *dev, unsigned int reg)
34 {
35 	int ret;
36 	u16 word;
37 	struct spi_device *spi = to_spi_device(dev);
38 
39 	word = 0x8000 | (reg << 8);
40 	ret = spi_write(spi, (const u8 *)&word, sizeof(word));
41 	if (ret)
42 		return ret;
43 	/*
44 	 * This relies on the fact, that a transfer with NULL tx_buf shifts out
45 	 * zero bytes (=NOOP for MAX7301)
46 	 */
47 	ret = spi_read(spi, (u8 *)&word, sizeof(word));
48 	if (ret)
49 		return ret;
50 	return word & 0xff;
51 }
52 
53 static int max7301_probe(struct spi_device *spi)
54 {
55 	struct max7301 *ts;
56 	int ret;
57 
58 	/* bits_per_word cannot be configured in platform data */
59 	if (spi->dev.platform_data)
60 		spi->bits_per_word = 16;
61 	ret = spi_setup(spi);
62 	if (ret < 0)
63 		return ret;
64 
65 	ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL);
66 	if (!ts)
67 		return -ENOMEM;
68 
69 	ts->read = max7301_spi_read;
70 	ts->write = max7301_spi_write;
71 	ts->dev = &spi->dev;
72 
73 	ret = __max730x_probe(ts);
74 	return ret;
75 }
76 
77 static int max7301_remove(struct spi_device *spi)
78 {
79 	return __max730x_remove(&spi->dev);
80 }
81 
82 static const struct spi_device_id max7301_id[] = {
83 	{ "max7301", 0 },
84 	{ }
85 };
86 MODULE_DEVICE_TABLE(spi, max7301_id);
87 
88 static struct spi_driver max7301_driver = {
89 	.driver = {
90 		.name = "max7301",
91 		.owner = THIS_MODULE,
92 	},
93 	.probe = max7301_probe,
94 	.remove = max7301_remove,
95 	.id_table = max7301_id,
96 };
97 
98 static int __init max7301_init(void)
99 {
100 	return spi_register_driver(&max7301_driver);
101 }
102 /* register after spi postcore initcall and before
103  * subsys initcalls that may rely on these GPIOs
104  */
105 subsys_initcall(max7301_init);
106 
107 static void __exit max7301_exit(void)
108 {
109 	spi_unregister_driver(&max7301_driver);
110 }
111 module_exit(max7301_exit);
112 
113 MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
114 MODULE_LICENSE("GPL v2");
115 MODULE_DESCRIPTION("MAX7301 GPIO-Expander");
116