1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2018 Spreadtrum Communications Inc. 4 * Copyright (C) 2018 Linaro Ltd. 5 */ 6 7 #include <linux/bitops.h> 8 #include <linux/gpio/driver.h> 9 #include <linux/interrupt.h> 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/of_device.h> 13 #include <linux/platform_device.h> 14 #include <linux/spinlock.h> 15 16 /* EIC registers definition */ 17 #define SPRD_EIC_DBNC_DATA 0x0 18 #define SPRD_EIC_DBNC_DMSK 0x4 19 #define SPRD_EIC_DBNC_IEV 0x14 20 #define SPRD_EIC_DBNC_IE 0x18 21 #define SPRD_EIC_DBNC_RIS 0x1c 22 #define SPRD_EIC_DBNC_MIS 0x20 23 #define SPRD_EIC_DBNC_IC 0x24 24 #define SPRD_EIC_DBNC_TRIG 0x28 25 #define SPRD_EIC_DBNC_CTRL0 0x40 26 27 #define SPRD_EIC_LATCH_INTEN 0x0 28 #define SPRD_EIC_LATCH_INTRAW 0x4 29 #define SPRD_EIC_LATCH_INTMSK 0x8 30 #define SPRD_EIC_LATCH_INTCLR 0xc 31 #define SPRD_EIC_LATCH_INTPOL 0x10 32 #define SPRD_EIC_LATCH_INTMODE 0x14 33 34 #define SPRD_EIC_ASYNC_INTIE 0x0 35 #define SPRD_EIC_ASYNC_INTRAW 0x4 36 #define SPRD_EIC_ASYNC_INTMSK 0x8 37 #define SPRD_EIC_ASYNC_INTCLR 0xc 38 #define SPRD_EIC_ASYNC_INTMODE 0x10 39 #define SPRD_EIC_ASYNC_INTBOTH 0x14 40 #define SPRD_EIC_ASYNC_INTPOL 0x18 41 #define SPRD_EIC_ASYNC_DATA 0x1c 42 43 #define SPRD_EIC_SYNC_INTIE 0x0 44 #define SPRD_EIC_SYNC_INTRAW 0x4 45 #define SPRD_EIC_SYNC_INTMSK 0x8 46 #define SPRD_EIC_SYNC_INTCLR 0xc 47 #define SPRD_EIC_SYNC_INTMODE 0x10 48 #define SPRD_EIC_SYNC_INTBOTH 0x14 49 #define SPRD_EIC_SYNC_INTPOL 0x18 50 #define SPRD_EIC_SYNC_DATA 0x1c 51 52 /* 53 * The digital-chip EIC controller can support maximum 3 banks, and each bank 54 * contains 8 EICs. 55 */ 56 #define SPRD_EIC_MAX_BANK 3 57 #define SPRD_EIC_PER_BANK_NR 8 58 #define SPRD_EIC_DATA_MASK GENMASK(7, 0) 59 #define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1)) 60 #define SPRD_EIC_DBNC_MASK GENMASK(11, 0) 61 62 /* 63 * The Spreadtrum EIC (external interrupt controller) can be used only in 64 * input mode to generate interrupts if detecting input signals. 65 * 66 * The Spreadtrum digital-chip EIC controller contains 4 sub-modules: 67 * debounce EIC, latch EIC, async EIC and sync EIC, 68 * 69 * The debounce EIC is used to capture the input signals' stable status 70 * (millisecond resolution) and a single-trigger mechanism is introduced 71 * into this sub-module to enhance the input event detection reliability. 72 * The debounce range is from 1ms to 4s with a step size of 1ms. 73 * 74 * The latch EIC is used to latch some special power down signals and 75 * generate interrupts, since the latch EIC does not depend on the APB clock 76 * to capture signals. 77 * 78 * The async EIC uses a 32k clock to capture the short signals (microsecond 79 * resolution) to generate interrupts by level or edge trigger. 80 * 81 * The EIC-sync is similar with GPIO's input function, which is a synchronized 82 * signal input register. 83 */ 84 enum sprd_eic_type { 85 SPRD_EIC_DEBOUNCE, 86 SPRD_EIC_LATCH, 87 SPRD_EIC_ASYNC, 88 SPRD_EIC_SYNC, 89 SPRD_EIC_MAX, 90 }; 91 92 struct sprd_eic { 93 struct gpio_chip chip; 94 struct irq_chip intc; 95 void __iomem *base[SPRD_EIC_MAX_BANK]; 96 enum sprd_eic_type type; 97 spinlock_t lock; 98 int irq; 99 }; 100 101 struct sprd_eic_variant_data { 102 enum sprd_eic_type type; 103 u32 num_eics; 104 }; 105 106 static const char *sprd_eic_label_name[SPRD_EIC_MAX] = { 107 "eic-debounce", "eic-latch", "eic-async", 108 "eic-sync", 109 }; 110 111 static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = { 112 .type = SPRD_EIC_DEBOUNCE, 113 .num_eics = 8, 114 }; 115 116 static const struct sprd_eic_variant_data sc9860_eic_latch_data = { 117 .type = SPRD_EIC_LATCH, 118 .num_eics = 8, 119 }; 120 121 static const struct sprd_eic_variant_data sc9860_eic_async_data = { 122 .type = SPRD_EIC_ASYNC, 123 .num_eics = 8, 124 }; 125 126 static const struct sprd_eic_variant_data sc9860_eic_sync_data = { 127 .type = SPRD_EIC_SYNC, 128 .num_eics = 8, 129 }; 130 131 static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic, 132 unsigned int bank) 133 { 134 if (bank >= SPRD_EIC_MAX_BANK) 135 return NULL; 136 137 return sprd_eic->base[bank]; 138 } 139 140 static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset, 141 u16 reg, unsigned int val) 142 { 143 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 144 void __iomem *base = 145 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); 146 unsigned long flags; 147 u32 tmp; 148 149 spin_lock_irqsave(&sprd_eic->lock, flags); 150 tmp = readl_relaxed(base + reg); 151 152 if (val) 153 tmp |= BIT(SPRD_EIC_BIT(offset)); 154 else 155 tmp &= ~BIT(SPRD_EIC_BIT(offset)); 156 157 writel_relaxed(tmp, base + reg); 158 spin_unlock_irqrestore(&sprd_eic->lock, flags); 159 } 160 161 static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg) 162 { 163 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 164 void __iomem *base = 165 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); 166 167 return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset))); 168 } 169 170 static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset) 171 { 172 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1); 173 return 0; 174 } 175 176 static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset) 177 { 178 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0); 179 } 180 181 static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset) 182 { 183 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 184 185 switch (sprd_eic->type) { 186 case SPRD_EIC_DEBOUNCE: 187 return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA); 188 case SPRD_EIC_ASYNC: 189 return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA); 190 case SPRD_EIC_SYNC: 191 return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA); 192 default: 193 return -ENOTSUPP; 194 } 195 } 196 197 static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset) 198 { 199 /* EICs are always input, nothing need to do here. */ 200 return 0; 201 } 202 203 static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value) 204 { 205 /* EICs are always input, nothing need to do here. */ 206 } 207 208 static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset, 209 unsigned int debounce) 210 { 211 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 212 void __iomem *base = 213 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); 214 u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4; 215 u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK; 216 217 value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK; 218 writel_relaxed(value, base + reg); 219 220 return 0; 221 } 222 223 static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset, 224 unsigned long config) 225 { 226 unsigned long param = pinconf_to_config_param(config); 227 u32 arg = pinconf_to_config_argument(config); 228 229 if (param == PIN_CONFIG_INPUT_DEBOUNCE) 230 return sprd_eic_set_debounce(chip, offset, arg); 231 232 return -ENOTSUPP; 233 } 234 235 static void sprd_eic_irq_mask(struct irq_data *data) 236 { 237 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 238 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 239 u32 offset = irqd_to_hwirq(data); 240 241 switch (sprd_eic->type) { 242 case SPRD_EIC_DEBOUNCE: 243 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0); 244 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0); 245 break; 246 case SPRD_EIC_LATCH: 247 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0); 248 break; 249 case SPRD_EIC_ASYNC: 250 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0); 251 break; 252 case SPRD_EIC_SYNC: 253 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0); 254 break; 255 default: 256 dev_err(chip->parent, "Unsupported EIC type.\n"); 257 } 258 } 259 260 static void sprd_eic_irq_unmask(struct irq_data *data) 261 { 262 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 263 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 264 u32 offset = irqd_to_hwirq(data); 265 266 switch (sprd_eic->type) { 267 case SPRD_EIC_DEBOUNCE: 268 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1); 269 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1); 270 break; 271 case SPRD_EIC_LATCH: 272 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1); 273 break; 274 case SPRD_EIC_ASYNC: 275 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1); 276 break; 277 case SPRD_EIC_SYNC: 278 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1); 279 break; 280 default: 281 dev_err(chip->parent, "Unsupported EIC type.\n"); 282 } 283 } 284 285 static void sprd_eic_irq_ack(struct irq_data *data) 286 { 287 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 288 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 289 u32 offset = irqd_to_hwirq(data); 290 291 switch (sprd_eic->type) { 292 case SPRD_EIC_DEBOUNCE: 293 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1); 294 break; 295 case SPRD_EIC_LATCH: 296 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1); 297 break; 298 case SPRD_EIC_ASYNC: 299 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); 300 break; 301 case SPRD_EIC_SYNC: 302 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); 303 break; 304 default: 305 dev_err(chip->parent, "Unsupported EIC type.\n"); 306 } 307 } 308 309 static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type) 310 { 311 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 312 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 313 u32 offset = irqd_to_hwirq(data); 314 int state; 315 316 switch (sprd_eic->type) { 317 case SPRD_EIC_DEBOUNCE: 318 switch (flow_type) { 319 case IRQ_TYPE_LEVEL_HIGH: 320 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1); 321 break; 322 case IRQ_TYPE_LEVEL_LOW: 323 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0); 324 break; 325 case IRQ_TYPE_EDGE_RISING: 326 case IRQ_TYPE_EDGE_FALLING: 327 case IRQ_TYPE_EDGE_BOTH: 328 state = sprd_eic_get(chip, offset); 329 if (state) 330 sprd_eic_update(chip, offset, 331 SPRD_EIC_DBNC_IEV, 0); 332 else 333 sprd_eic_update(chip, offset, 334 SPRD_EIC_DBNC_IEV, 1); 335 break; 336 default: 337 return -ENOTSUPP; 338 } 339 340 irq_set_handler_locked(data, handle_level_irq); 341 break; 342 case SPRD_EIC_LATCH: 343 switch (flow_type) { 344 case IRQ_TYPE_LEVEL_HIGH: 345 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0); 346 break; 347 case IRQ_TYPE_LEVEL_LOW: 348 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1); 349 break; 350 case IRQ_TYPE_EDGE_RISING: 351 case IRQ_TYPE_EDGE_FALLING: 352 case IRQ_TYPE_EDGE_BOTH: 353 state = sprd_eic_get(chip, offset); 354 if (state) 355 sprd_eic_update(chip, offset, 356 SPRD_EIC_LATCH_INTPOL, 0); 357 else 358 sprd_eic_update(chip, offset, 359 SPRD_EIC_LATCH_INTPOL, 1); 360 break; 361 default: 362 return -ENOTSUPP; 363 } 364 365 irq_set_handler_locked(data, handle_level_irq); 366 break; 367 case SPRD_EIC_ASYNC: 368 switch (flow_type) { 369 case IRQ_TYPE_EDGE_RISING: 370 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); 371 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); 372 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); 373 irq_set_handler_locked(data, handle_edge_irq); 374 break; 375 case IRQ_TYPE_EDGE_FALLING: 376 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); 377 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); 378 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); 379 irq_set_handler_locked(data, handle_edge_irq); 380 break; 381 case IRQ_TYPE_EDGE_BOTH: 382 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); 383 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1); 384 irq_set_handler_locked(data, handle_edge_irq); 385 break; 386 case IRQ_TYPE_LEVEL_HIGH: 387 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); 388 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); 389 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); 390 irq_set_handler_locked(data, handle_level_irq); 391 break; 392 case IRQ_TYPE_LEVEL_LOW: 393 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); 394 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); 395 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); 396 irq_set_handler_locked(data, handle_level_irq); 397 break; 398 default: 399 return -ENOTSUPP; 400 } 401 break; 402 case SPRD_EIC_SYNC: 403 switch (flow_type) { 404 case IRQ_TYPE_EDGE_RISING: 405 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); 406 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); 407 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); 408 irq_set_handler_locked(data, handle_edge_irq); 409 break; 410 case IRQ_TYPE_EDGE_FALLING: 411 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); 412 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); 413 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); 414 irq_set_handler_locked(data, handle_edge_irq); 415 break; 416 case IRQ_TYPE_EDGE_BOTH: 417 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); 418 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1); 419 irq_set_handler_locked(data, handle_edge_irq); 420 break; 421 case IRQ_TYPE_LEVEL_HIGH: 422 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); 423 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); 424 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); 425 irq_set_handler_locked(data, handle_level_irq); 426 break; 427 case IRQ_TYPE_LEVEL_LOW: 428 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); 429 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); 430 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); 431 irq_set_handler_locked(data, handle_level_irq); 432 break; 433 default: 434 return -ENOTSUPP; 435 } 436 break; 437 default: 438 dev_err(chip->parent, "Unsupported EIC type.\n"); 439 return -ENOTSUPP; 440 } 441 442 return 0; 443 } 444 445 static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq, 446 unsigned int offset) 447 { 448 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 449 struct irq_data *data = irq_get_irq_data(irq); 450 u32 trigger = irqd_get_trigger_type(data); 451 int state, post_state; 452 453 /* 454 * The debounce EIC and latch EIC can only support level trigger, so we 455 * can toggle the level trigger to emulate the edge trigger. 456 */ 457 if ((sprd_eic->type != SPRD_EIC_DEBOUNCE && 458 sprd_eic->type != SPRD_EIC_LATCH) || 459 !(trigger & IRQ_TYPE_EDGE_BOTH)) 460 return; 461 462 sprd_eic_irq_mask(data); 463 state = sprd_eic_get(chip, offset); 464 465 retry: 466 switch (sprd_eic->type) { 467 case SPRD_EIC_DEBOUNCE: 468 if (state) 469 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0); 470 else 471 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1); 472 break; 473 case SPRD_EIC_LATCH: 474 if (state) 475 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0); 476 else 477 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1); 478 break; 479 default: 480 sprd_eic_irq_unmask(data); 481 return; 482 } 483 484 post_state = sprd_eic_get(chip, offset); 485 if (state != post_state) { 486 dev_warn(chip->parent, "EIC level was changed.\n"); 487 state = post_state; 488 goto retry; 489 } 490 491 sprd_eic_irq_unmask(data); 492 } 493 494 static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data) 495 { 496 enum sprd_eic_type type = *(enum sprd_eic_type *)data; 497 498 return !strcmp(chip->label, sprd_eic_label_name[type]); 499 } 500 501 static void sprd_eic_handle_one_type(struct gpio_chip *chip) 502 { 503 struct sprd_eic *sprd_eic = gpiochip_get_data(chip); 504 u32 bank, n, girq; 505 506 for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) { 507 void __iomem *base = sprd_eic_offset_base(sprd_eic, bank); 508 unsigned long reg; 509 510 switch (sprd_eic->type) { 511 case SPRD_EIC_DEBOUNCE: 512 reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) & 513 SPRD_EIC_DATA_MASK; 514 break; 515 case SPRD_EIC_LATCH: 516 reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) & 517 SPRD_EIC_DATA_MASK; 518 break; 519 case SPRD_EIC_ASYNC: 520 reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) & 521 SPRD_EIC_DATA_MASK; 522 break; 523 case SPRD_EIC_SYNC: 524 reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) & 525 SPRD_EIC_DATA_MASK; 526 break; 527 default: 528 dev_err(chip->parent, "Unsupported EIC type.\n"); 529 return; 530 } 531 532 for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) { 533 u32 offset = bank * SPRD_EIC_PER_BANK_NR + n; 534 535 girq = irq_find_mapping(chip->irq.domain, offset); 536 537 generic_handle_irq(girq); 538 sprd_eic_toggle_trigger(chip, girq, offset); 539 } 540 } 541 } 542 543 static void sprd_eic_irq_handler(struct irq_desc *desc) 544 { 545 struct irq_chip *ic = irq_desc_get_chip(desc); 546 struct gpio_chip *chip; 547 enum sprd_eic_type type; 548 549 chained_irq_enter(ic, desc); 550 551 /* 552 * Since the digital-chip EIC 4 sub-modules (debounce, latch, async 553 * and sync) share one same interrupt line, we should iterate each 554 * EIC module to check if there are EIC interrupts were triggered. 555 */ 556 for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) { 557 chip = gpiochip_find(&type, sprd_eic_match_chip_by_type); 558 if (!chip) 559 continue; 560 561 sprd_eic_handle_one_type(chip); 562 } 563 564 chained_irq_exit(ic, desc); 565 } 566 567 static int sprd_eic_probe(struct platform_device *pdev) 568 { 569 const struct sprd_eic_variant_data *pdata; 570 struct gpio_irq_chip *irq; 571 struct sprd_eic *sprd_eic; 572 struct resource *res; 573 int ret, i; 574 575 pdata = of_device_get_match_data(&pdev->dev); 576 if (!pdata) { 577 dev_err(&pdev->dev, "No matching driver data found.\n"); 578 return -EINVAL; 579 } 580 581 sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL); 582 if (!sprd_eic) 583 return -ENOMEM; 584 585 spin_lock_init(&sprd_eic->lock); 586 sprd_eic->type = pdata->type; 587 588 sprd_eic->irq = platform_get_irq(pdev, 0); 589 if (sprd_eic->irq < 0) 590 return sprd_eic->irq; 591 592 for (i = 0; i < SPRD_EIC_MAX_BANK; i++) { 593 /* 594 * We can have maximum 3 banks EICs, and each EIC has 595 * its own base address. But some platform maybe only 596 * have one bank EIC, thus base[1] and base[2] can be 597 * optional. 598 */ 599 res = platform_get_resource(pdev, IORESOURCE_MEM, i); 600 if (!res) 601 continue; 602 603 sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res); 604 if (IS_ERR(sprd_eic->base[i])) 605 return PTR_ERR(sprd_eic->base[i]); 606 } 607 608 sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type]; 609 sprd_eic->chip.ngpio = pdata->num_eics; 610 sprd_eic->chip.base = -1; 611 sprd_eic->chip.parent = &pdev->dev; 612 sprd_eic->chip.of_node = pdev->dev.of_node; 613 sprd_eic->chip.direction_input = sprd_eic_direction_input; 614 switch (sprd_eic->type) { 615 case SPRD_EIC_DEBOUNCE: 616 sprd_eic->chip.request = sprd_eic_request; 617 sprd_eic->chip.free = sprd_eic_free; 618 sprd_eic->chip.set_config = sprd_eic_set_config; 619 sprd_eic->chip.set = sprd_eic_set; 620 fallthrough; 621 case SPRD_EIC_ASYNC: 622 case SPRD_EIC_SYNC: 623 sprd_eic->chip.get = sprd_eic_get; 624 break; 625 case SPRD_EIC_LATCH: 626 default: 627 break; 628 } 629 630 sprd_eic->intc.name = dev_name(&pdev->dev); 631 sprd_eic->intc.irq_ack = sprd_eic_irq_ack; 632 sprd_eic->intc.irq_mask = sprd_eic_irq_mask; 633 sprd_eic->intc.irq_unmask = sprd_eic_irq_unmask; 634 sprd_eic->intc.irq_set_type = sprd_eic_irq_set_type; 635 sprd_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE; 636 637 irq = &sprd_eic->chip.irq; 638 irq->chip = &sprd_eic->intc; 639 irq->handler = handle_bad_irq; 640 irq->default_type = IRQ_TYPE_NONE; 641 irq->parent_handler = sprd_eic_irq_handler; 642 irq->parent_handler_data = sprd_eic; 643 irq->num_parents = 1; 644 irq->parents = &sprd_eic->irq; 645 646 ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic); 647 if (ret < 0) { 648 dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret); 649 return ret; 650 } 651 652 platform_set_drvdata(pdev, sprd_eic); 653 return 0; 654 } 655 656 static const struct of_device_id sprd_eic_of_match[] = { 657 { 658 .compatible = "sprd,sc9860-eic-debounce", 659 .data = &sc9860_eic_dbnc_data, 660 }, 661 { 662 .compatible = "sprd,sc9860-eic-latch", 663 .data = &sc9860_eic_latch_data, 664 }, 665 { 666 .compatible = "sprd,sc9860-eic-async", 667 .data = &sc9860_eic_async_data, 668 }, 669 { 670 .compatible = "sprd,sc9860-eic-sync", 671 .data = &sc9860_eic_sync_data, 672 }, 673 { 674 /* end of list */ 675 } 676 }; 677 MODULE_DEVICE_TABLE(of, sprd_eic_of_match); 678 679 static struct platform_driver sprd_eic_driver = { 680 .probe = sprd_eic_probe, 681 .driver = { 682 .name = "sprd-eic", 683 .of_match_table = sprd_eic_of_match, 684 }, 685 }; 686 687 module_platform_driver(sprd_eic_driver); 688 689 MODULE_DESCRIPTION("Spreadtrum EIC driver"); 690 MODULE_LICENSE("GPL v2"); 691