xref: /openbmc/linux/drivers/gpio/gpio-bd71828.c (revision 7559e757)
1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (C) 2018 ROHM Semiconductors
3 
4 #include <linux/gpio/driver.h>
5 #include <linux/mfd/rohm-bd71828.h>
6 #include <linux/module.h>
7 #include <linux/platform_device.h>
8 #include <linux/regmap.h>
9 
10 #define GPIO_OUT_REG(off) (BD71828_REG_GPIO_CTRL1 + (off))
11 #define HALL_GPIO_OFFSET 3
12 
13 struct bd71828_gpio {
14 	struct regmap *regmap;
15 	struct device *dev;
16 	struct gpio_chip gpio;
17 };
18 
19 static void bd71828_gpio_set(struct gpio_chip *chip, unsigned int offset,
20 			     int value)
21 {
22 	int ret;
23 	struct bd71828_gpio *bdgpio = gpiochip_get_data(chip);
24 	u8 val = (value) ? BD71828_GPIO_OUT_HI : BD71828_GPIO_OUT_LO;
25 
26 	/*
27 	 * The HALL input pin can only be used as input. If this is the pin
28 	 * we are dealing with - then we are done
29 	 */
30 	if (offset == HALL_GPIO_OFFSET)
31 		return;
32 
33 	ret = regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
34 				 BD71828_GPIO_OUT_MASK, val);
35 	if (ret)
36 		dev_err(bdgpio->dev, "Could not set gpio to %d\n", value);
37 }
38 
39 static int bd71828_gpio_get(struct gpio_chip *chip, unsigned int offset)
40 {
41 	int ret;
42 	unsigned int val;
43 	struct bd71828_gpio *bdgpio = gpiochip_get_data(chip);
44 
45 	if (offset == HALL_GPIO_OFFSET)
46 		ret = regmap_read(bdgpio->regmap, BD71828_REG_IO_STAT,
47 				  &val);
48 	else
49 		ret = regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset),
50 				  &val);
51 	if (!ret)
52 		ret = (val & BD71828_GPIO_OUT_MASK);
53 
54 	return ret;
55 }
56 
57 static int bd71828_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
58 				   unsigned long config)
59 {
60 	struct bd71828_gpio *bdgpio = gpiochip_get_data(chip);
61 
62 	if (offset == HALL_GPIO_OFFSET)
63 		return -ENOTSUPP;
64 
65 	switch (pinconf_to_config_param(config)) {
66 	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
67 		return regmap_update_bits(bdgpio->regmap,
68 					  GPIO_OUT_REG(offset),
69 					  BD71828_GPIO_DRIVE_MASK,
70 					  BD71828_GPIO_OPEN_DRAIN);
71 	case PIN_CONFIG_DRIVE_PUSH_PULL:
72 		return regmap_update_bits(bdgpio->regmap,
73 					  GPIO_OUT_REG(offset),
74 					  BD71828_GPIO_DRIVE_MASK,
75 					  BD71828_GPIO_PUSH_PULL);
76 	default:
77 		break;
78 	}
79 	return -ENOTSUPP;
80 }
81 
82 static int bd71828_get_direction(struct gpio_chip *chip, unsigned int offset)
83 {
84 	/*
85 	 * Pin usage is selected by OTP data. We can't read it runtime. Hence
86 	 * we trust that if the pin is not excluded by "gpio-reserved-ranges"
87 	 * the OTP configuration is set to OUT. (Other pins but HALL input pin
88 	 * on BD71828 can't really be used for general purpose input - input
89 	 * states are used for specific cases like regulator control or
90 	 * PMIC_ON_REQ.
91 	 */
92 	if (offset == HALL_GPIO_OFFSET)
93 		return GPIO_LINE_DIRECTION_IN;
94 
95 	return GPIO_LINE_DIRECTION_OUT;
96 }
97 
98 static int bd71828_probe(struct platform_device *pdev)
99 {
100 	struct device *dev = &pdev->dev;
101 	struct bd71828_gpio *bdgpio;
102 
103 	bdgpio = devm_kzalloc(dev, sizeof(*bdgpio), GFP_KERNEL);
104 	if (!bdgpio)
105 		return -ENOMEM;
106 
107 	bdgpio->dev = dev;
108 	bdgpio->gpio.parent = dev->parent;
109 	bdgpio->gpio.label = "bd71828-gpio";
110 	bdgpio->gpio.owner = THIS_MODULE;
111 	bdgpio->gpio.get_direction = bd71828_get_direction;
112 	bdgpio->gpio.set_config = bd71828_gpio_set_config;
113 	bdgpio->gpio.can_sleep = true;
114 	bdgpio->gpio.get = bd71828_gpio_get;
115 	bdgpio->gpio.set = bd71828_gpio_set;
116 	bdgpio->gpio.base = -1;
117 
118 	/*
119 	 * See if we need some implementation to mark some PINs as
120 	 * not controllable based on DT info or if core can handle
121 	 * "gpio-reserved-ranges" and exclude them from control
122 	 */
123 	bdgpio->gpio.ngpio = 4;
124 	bdgpio->regmap = dev_get_regmap(dev->parent, NULL);
125 	if (!bdgpio->regmap)
126 		return -ENODEV;
127 
128 	return devm_gpiochip_add_data(dev, &bdgpio->gpio, bdgpio);
129 }
130 
131 static struct platform_driver bd71828_gpio = {
132 	.driver = {
133 		.name = "bd71828-gpio"
134 	},
135 	.probe = bd71828_probe,
136 };
137 
138 module_platform_driver(bd71828_gpio);
139 
140 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
141 MODULE_DESCRIPTION("BD71828 voltage regulator driver");
142 MODULE_LICENSE("GPL");
143 MODULE_ALIAS("platform:bd71828-gpio");
144