1 /* 2 * Copyright (C) 2012-2014 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/bitops.h> 15 #include <linux/err.h> 16 #include <linux/io.h> 17 #include <linux/gpio.h> 18 #include <linux/of_device.h> 19 #include <linux/of_irq.h> 20 #include <linux/module.h> 21 #include <linux/irqdomain.h> 22 #include <linux/irqchip/chained_irq.h> 23 24 #define BCM_GPIO_PASSWD 0x00a5a501 25 #define GPIO_PER_BANK 32 26 #define GPIO_MAX_BANK_NUM 8 27 28 #define GPIO_BANK(gpio) ((gpio) >> 5) 29 #define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1)) 30 31 /* There is a GPIO control register for each GPIO */ 32 #define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2)) 33 34 /* The remaining registers are per GPIO bank */ 35 #define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2)) 36 #define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2)) 37 #define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2)) 38 #define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2)) 39 #define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2)) 40 #define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2)) 41 #define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2)) 42 #define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2)) 43 44 #define GPIO_GPPWR_OFFSET 0x00000520 45 46 #define GPIO_GPCTR0_DBR_SHIFT 5 47 #define GPIO_GPCTR0_DBR_MASK 0x000001e0 48 49 #define GPIO_GPCTR0_ITR_SHIFT 3 50 #define GPIO_GPCTR0_ITR_MASK 0x00000018 51 #define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001 52 #define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002 53 #define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003 54 55 #define GPIO_GPCTR0_IOTR_MASK 0x00000001 56 #define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000 57 #define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001 58 59 #define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100 60 61 #define LOCK_CODE 0xffffffff 62 #define UNLOCK_CODE 0x00000000 63 64 struct bcm_kona_gpio { 65 void __iomem *reg_base; 66 int num_bank; 67 spinlock_t lock; 68 struct gpio_chip gpio_chip; 69 struct irq_domain *irq_domain; 70 struct bcm_kona_gpio_bank *banks; 71 struct platform_device *pdev; 72 }; 73 74 struct bcm_kona_gpio_bank { 75 int id; 76 int irq; 77 /* Used in the interrupt handler */ 78 struct bcm_kona_gpio *kona_gpio; 79 }; 80 81 static inline struct bcm_kona_gpio *to_kona_gpio(struct gpio_chip *chip) 82 { 83 return container_of(chip, struct bcm_kona_gpio, gpio_chip); 84 } 85 86 static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base, 87 int bank_id, u32 lockcode) 88 { 89 writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET); 90 writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id)); 91 } 92 93 static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio, 94 unsigned gpio) 95 { 96 u32 val; 97 unsigned long flags; 98 int bank_id = GPIO_BANK(gpio); 99 100 spin_lock_irqsave(&kona_gpio->lock, flags); 101 102 val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); 103 val |= BIT(gpio); 104 bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); 105 106 spin_unlock_irqrestore(&kona_gpio->lock, flags); 107 } 108 109 static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio, 110 unsigned gpio) 111 { 112 u32 val; 113 unsigned long flags; 114 int bank_id = GPIO_BANK(gpio); 115 116 spin_lock_irqsave(&kona_gpio->lock, flags); 117 118 val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); 119 val &= ~BIT(gpio); 120 bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); 121 122 spin_unlock_irqrestore(&kona_gpio->lock, flags); 123 } 124 125 static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value) 126 { 127 struct bcm_kona_gpio *kona_gpio; 128 void __iomem *reg_base; 129 int bank_id = GPIO_BANK(gpio); 130 int bit = GPIO_BIT(gpio); 131 u32 val, reg_offset; 132 unsigned long flags; 133 134 kona_gpio = to_kona_gpio(chip); 135 reg_base = kona_gpio->reg_base; 136 spin_lock_irqsave(&kona_gpio->lock, flags); 137 138 /* determine the GPIO pin direction */ 139 val = readl(reg_base + GPIO_CONTROL(gpio)); 140 val &= GPIO_GPCTR0_IOTR_MASK; 141 142 /* this function only applies to output pin */ 143 if (GPIO_GPCTR0_IOTR_CMD_INPUT == val) 144 goto out; 145 146 reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); 147 148 val = readl(reg_base + reg_offset); 149 val |= BIT(bit); 150 writel(val, reg_base + reg_offset); 151 152 out: 153 spin_unlock_irqrestore(&kona_gpio->lock, flags); 154 } 155 156 static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio) 157 { 158 struct bcm_kona_gpio *kona_gpio; 159 void __iomem *reg_base; 160 int bank_id = GPIO_BANK(gpio); 161 int bit = GPIO_BIT(gpio); 162 u32 val, reg_offset; 163 unsigned long flags; 164 165 kona_gpio = to_kona_gpio(chip); 166 reg_base = kona_gpio->reg_base; 167 spin_lock_irqsave(&kona_gpio->lock, flags); 168 169 /* determine the GPIO pin direction */ 170 val = readl(reg_base + GPIO_CONTROL(gpio)); 171 val &= GPIO_GPCTR0_IOTR_MASK; 172 173 /* read the GPIO bank status */ 174 reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ? 175 GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id); 176 val = readl(reg_base + reg_offset); 177 178 spin_unlock_irqrestore(&kona_gpio->lock, flags); 179 180 /* return the specified bit status */ 181 return !!(val & BIT(bit)); 182 } 183 184 static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio) 185 { 186 struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip); 187 188 bcm_kona_gpio_unlock_gpio(kona_gpio, gpio); 189 return 0; 190 } 191 192 static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio) 193 { 194 struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip); 195 196 bcm_kona_gpio_lock_gpio(kona_gpio, gpio); 197 } 198 199 static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) 200 { 201 struct bcm_kona_gpio *kona_gpio; 202 void __iomem *reg_base; 203 u32 val; 204 unsigned long flags; 205 206 kona_gpio = to_kona_gpio(chip); 207 reg_base = kona_gpio->reg_base; 208 spin_lock_irqsave(&kona_gpio->lock, flags); 209 210 val = readl(reg_base + GPIO_CONTROL(gpio)); 211 val &= ~GPIO_GPCTR0_IOTR_MASK; 212 val |= GPIO_GPCTR0_IOTR_CMD_INPUT; 213 writel(val, reg_base + GPIO_CONTROL(gpio)); 214 215 spin_unlock_irqrestore(&kona_gpio->lock, flags); 216 217 return 0; 218 } 219 220 static int bcm_kona_gpio_direction_output(struct gpio_chip *chip, 221 unsigned gpio, int value) 222 { 223 struct bcm_kona_gpio *kona_gpio; 224 void __iomem *reg_base; 225 int bank_id = GPIO_BANK(gpio); 226 int bit = GPIO_BIT(gpio); 227 u32 val, reg_offset; 228 unsigned long flags; 229 230 kona_gpio = to_kona_gpio(chip); 231 reg_base = kona_gpio->reg_base; 232 spin_lock_irqsave(&kona_gpio->lock, flags); 233 234 val = readl(reg_base + GPIO_CONTROL(gpio)); 235 val &= ~GPIO_GPCTR0_IOTR_MASK; 236 val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT; 237 writel(val, reg_base + GPIO_CONTROL(gpio)); 238 reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); 239 240 val = readl(reg_base + reg_offset); 241 val |= BIT(bit); 242 writel(val, reg_base + reg_offset); 243 244 spin_unlock_irqrestore(&kona_gpio->lock, flags); 245 246 return 0; 247 } 248 249 static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) 250 { 251 struct bcm_kona_gpio *kona_gpio; 252 253 kona_gpio = to_kona_gpio(chip); 254 if (gpio >= kona_gpio->gpio_chip.ngpio) 255 return -ENXIO; 256 return irq_create_mapping(kona_gpio->irq_domain, gpio); 257 } 258 259 static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio, 260 unsigned debounce) 261 { 262 struct bcm_kona_gpio *kona_gpio; 263 void __iomem *reg_base; 264 u32 val, res; 265 unsigned long flags; 266 267 kona_gpio = to_kona_gpio(chip); 268 reg_base = kona_gpio->reg_base; 269 /* debounce must be 1-128ms (or 0) */ 270 if ((debounce > 0 && debounce < 1000) || debounce > 128000) { 271 dev_err(chip->dev, "Debounce value %u not in range\n", 272 debounce); 273 return -EINVAL; 274 } 275 276 /* calculate debounce bit value */ 277 if (debounce != 0) { 278 /* Convert to ms */ 279 debounce /= 1000; 280 /* find the MSB */ 281 res = fls(debounce) - 1; 282 /* Check if MSB-1 is set (round up or down) */ 283 if (res > 0 && (debounce & BIT(res - 1))) 284 res++; 285 } 286 287 /* spin lock for read-modify-write of the GPIO register */ 288 spin_lock_irqsave(&kona_gpio->lock, flags); 289 290 val = readl(reg_base + GPIO_CONTROL(gpio)); 291 val &= ~GPIO_GPCTR0_DBR_MASK; 292 293 if (debounce == 0) { 294 /* disable debounce */ 295 val &= ~GPIO_GPCTR0_DB_ENABLE_MASK; 296 } else { 297 val |= GPIO_GPCTR0_DB_ENABLE_MASK | 298 (res << GPIO_GPCTR0_DBR_SHIFT); 299 } 300 301 writel(val, reg_base + GPIO_CONTROL(gpio)); 302 303 spin_unlock_irqrestore(&kona_gpio->lock, flags); 304 305 return 0; 306 } 307 308 static struct gpio_chip template_chip = { 309 .label = "bcm-kona-gpio", 310 .owner = THIS_MODULE, 311 .request = bcm_kona_gpio_request, 312 .free = bcm_kona_gpio_free, 313 .direction_input = bcm_kona_gpio_direction_input, 314 .get = bcm_kona_gpio_get, 315 .direction_output = bcm_kona_gpio_direction_output, 316 .set = bcm_kona_gpio_set, 317 .set_debounce = bcm_kona_gpio_set_debounce, 318 .to_irq = bcm_kona_gpio_to_irq, 319 .base = 0, 320 }; 321 322 static void bcm_kona_gpio_irq_ack(struct irq_data *d) 323 { 324 struct bcm_kona_gpio *kona_gpio; 325 void __iomem *reg_base; 326 unsigned gpio = d->hwirq; 327 int bank_id = GPIO_BANK(gpio); 328 int bit = GPIO_BIT(gpio); 329 u32 val; 330 unsigned long flags; 331 332 kona_gpio = irq_data_get_irq_chip_data(d); 333 reg_base = kona_gpio->reg_base; 334 spin_lock_irqsave(&kona_gpio->lock, flags); 335 336 val = readl(reg_base + GPIO_INT_STATUS(bank_id)); 337 val |= BIT(bit); 338 writel(val, reg_base + GPIO_INT_STATUS(bank_id)); 339 340 spin_unlock_irqrestore(&kona_gpio->lock, flags); 341 } 342 343 static void bcm_kona_gpio_irq_mask(struct irq_data *d) 344 { 345 struct bcm_kona_gpio *kona_gpio; 346 void __iomem *reg_base; 347 unsigned gpio = d->hwirq; 348 int bank_id = GPIO_BANK(gpio); 349 int bit = GPIO_BIT(gpio); 350 u32 val; 351 unsigned long flags; 352 353 kona_gpio = irq_data_get_irq_chip_data(d); 354 reg_base = kona_gpio->reg_base; 355 spin_lock_irqsave(&kona_gpio->lock, flags); 356 357 val = readl(reg_base + GPIO_INT_MASK(bank_id)); 358 val |= BIT(bit); 359 writel(val, reg_base + GPIO_INT_MASK(bank_id)); 360 361 spin_unlock_irqrestore(&kona_gpio->lock, flags); 362 } 363 364 static void bcm_kona_gpio_irq_unmask(struct irq_data *d) 365 { 366 struct bcm_kona_gpio *kona_gpio; 367 void __iomem *reg_base; 368 unsigned gpio = d->hwirq; 369 int bank_id = GPIO_BANK(gpio); 370 int bit = GPIO_BIT(gpio); 371 u32 val; 372 unsigned long flags; 373 374 kona_gpio = irq_data_get_irq_chip_data(d); 375 reg_base = kona_gpio->reg_base; 376 spin_lock_irqsave(&kona_gpio->lock, flags); 377 378 val = readl(reg_base + GPIO_INT_MSKCLR(bank_id)); 379 val |= BIT(bit); 380 writel(val, reg_base + GPIO_INT_MSKCLR(bank_id)); 381 382 spin_unlock_irqrestore(&kona_gpio->lock, flags); 383 } 384 385 static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type) 386 { 387 struct bcm_kona_gpio *kona_gpio; 388 void __iomem *reg_base; 389 unsigned gpio = d->hwirq; 390 u32 lvl_type; 391 u32 val; 392 unsigned long flags; 393 394 kona_gpio = irq_data_get_irq_chip_data(d); 395 reg_base = kona_gpio->reg_base; 396 switch (type & IRQ_TYPE_SENSE_MASK) { 397 case IRQ_TYPE_EDGE_RISING: 398 lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE; 399 break; 400 401 case IRQ_TYPE_EDGE_FALLING: 402 lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE; 403 break; 404 405 case IRQ_TYPE_EDGE_BOTH: 406 lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE; 407 break; 408 409 case IRQ_TYPE_LEVEL_HIGH: 410 case IRQ_TYPE_LEVEL_LOW: 411 /* BCM GPIO doesn't support level triggering */ 412 default: 413 dev_err(kona_gpio->gpio_chip.dev, 414 "Invalid BCM GPIO irq type 0x%x\n", type); 415 return -EINVAL; 416 } 417 418 spin_lock_irqsave(&kona_gpio->lock, flags); 419 420 val = readl(reg_base + GPIO_CONTROL(gpio)); 421 val &= ~GPIO_GPCTR0_ITR_MASK; 422 val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT; 423 writel(val, reg_base + GPIO_CONTROL(gpio)); 424 425 spin_unlock_irqrestore(&kona_gpio->lock, flags); 426 427 return 0; 428 } 429 430 static void bcm_kona_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) 431 { 432 void __iomem *reg_base; 433 int bit, bank_id; 434 unsigned long sta; 435 struct bcm_kona_gpio_bank *bank = irq_get_handler_data(irq); 436 struct irq_chip *chip = irq_desc_get_chip(desc); 437 438 chained_irq_enter(chip, desc); 439 440 /* 441 * For bank interrupts, we can't use chip_data to store the kona_gpio 442 * pointer, since GIC needs it for its own purposes. Therefore, we get 443 * our pointer from the bank structure. 444 */ 445 reg_base = bank->kona_gpio->reg_base; 446 bank_id = bank->id; 447 448 while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) & 449 (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) { 450 for_each_set_bit(bit, &sta, 32) { 451 int hwirq = GPIO_PER_BANK * bank_id + bit; 452 int child_irq = 453 irq_find_mapping(bank->kona_gpio->irq_domain, 454 hwirq); 455 /* 456 * Clear interrupt before handler is called so we don't 457 * miss any interrupt occurred during executing them. 458 */ 459 writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) | 460 BIT(bit), reg_base + GPIO_INT_STATUS(bank_id)); 461 /* Invoke interrupt handler */ 462 generic_handle_irq(child_irq); 463 } 464 } 465 466 chained_irq_exit(chip, desc); 467 } 468 469 static int bcm_kona_gpio_irq_reqres(struct irq_data *d) 470 { 471 struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); 472 473 if (gpio_lock_as_irq(&kona_gpio->gpio_chip, d->hwirq)) { 474 dev_err(kona_gpio->gpio_chip.dev, 475 "unable to lock HW IRQ %lu for IRQ\n", 476 d->hwirq); 477 return -EINVAL; 478 } 479 return 0; 480 } 481 482 static void bcm_kona_gpio_irq_relres(struct irq_data *d) 483 { 484 struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); 485 486 gpio_unlock_as_irq(&kona_gpio->gpio_chip, d->hwirq); 487 } 488 489 static struct irq_chip bcm_gpio_irq_chip = { 490 .name = "bcm-kona-gpio", 491 .irq_ack = bcm_kona_gpio_irq_ack, 492 .irq_mask = bcm_kona_gpio_irq_mask, 493 .irq_unmask = bcm_kona_gpio_irq_unmask, 494 .irq_set_type = bcm_kona_gpio_irq_set_type, 495 .irq_request_resources = bcm_kona_gpio_irq_reqres, 496 .irq_release_resources = bcm_kona_gpio_irq_relres, 497 }; 498 499 static struct of_device_id const bcm_kona_gpio_of_match[] = { 500 { .compatible = "brcm,kona-gpio" }, 501 {} 502 }; 503 504 MODULE_DEVICE_TABLE(of, bcm_kona_gpio_of_match); 505 506 /* 507 * This lock class tells lockdep that GPIO irqs are in a different 508 * category than their parents, so it won't report false recursion. 509 */ 510 static struct lock_class_key gpio_lock_class; 511 512 static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, 513 irq_hw_number_t hwirq) 514 { 515 int ret; 516 517 ret = irq_set_chip_data(irq, d->host_data); 518 if (ret < 0) 519 return ret; 520 irq_set_lockdep_class(irq, &gpio_lock_class); 521 irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq); 522 #ifdef CONFIG_ARM 523 set_irq_flags(irq, IRQF_VALID); 524 #else 525 irq_set_noprobe(irq); 526 #endif 527 528 return 0; 529 } 530 531 static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq) 532 { 533 irq_set_chip_and_handler(irq, NULL, NULL); 534 irq_set_chip_data(irq, NULL); 535 } 536 537 static struct irq_domain_ops bcm_kona_irq_ops = { 538 .map = bcm_kona_gpio_irq_map, 539 .unmap = bcm_kona_gpio_irq_unmap, 540 .xlate = irq_domain_xlate_twocell, 541 }; 542 543 static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio) 544 { 545 void __iomem *reg_base; 546 int i; 547 548 reg_base = kona_gpio->reg_base; 549 /* disable interrupts and clear status */ 550 for (i = 0; i < kona_gpio->num_bank; i++) { 551 /* Unlock the entire bank first */ 552 bcm_kona_gpio_write_lock_regs(kona_gpio, i, UNLOCK_CODE); 553 writel(0xffffffff, reg_base + GPIO_INT_MASK(i)); 554 writel(0xffffffff, reg_base + GPIO_INT_STATUS(i)); 555 /* Now re-lock the bank */ 556 bcm_kona_gpio_write_lock_regs(kona_gpio, i, LOCK_CODE); 557 } 558 } 559 560 static int bcm_kona_gpio_probe(struct platform_device *pdev) 561 { 562 struct device *dev = &pdev->dev; 563 const struct of_device_id *match; 564 struct resource *res; 565 struct bcm_kona_gpio_bank *bank; 566 struct bcm_kona_gpio *kona_gpio; 567 struct gpio_chip *chip; 568 int ret; 569 int i; 570 571 match = of_match_device(bcm_kona_gpio_of_match, dev); 572 if (!match) { 573 dev_err(dev, "Failed to find gpio controller\n"); 574 return -ENODEV; 575 } 576 577 kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL); 578 if (!kona_gpio) 579 return -ENOMEM; 580 581 kona_gpio->gpio_chip = template_chip; 582 chip = &kona_gpio->gpio_chip; 583 kona_gpio->num_bank = of_irq_count(dev->of_node); 584 if (kona_gpio->num_bank == 0) { 585 dev_err(dev, "Couldn't determine # GPIO banks\n"); 586 return -ENOENT; 587 } 588 if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) { 589 dev_err(dev, "Too many GPIO banks configured (max=%d)\n", 590 GPIO_MAX_BANK_NUM); 591 return -ENXIO; 592 } 593 kona_gpio->banks = devm_kzalloc(dev, 594 kona_gpio->num_bank * 595 sizeof(*kona_gpio->banks), GFP_KERNEL); 596 if (!kona_gpio->banks) 597 return -ENOMEM; 598 599 kona_gpio->pdev = pdev; 600 platform_set_drvdata(pdev, kona_gpio); 601 chip->of_node = dev->of_node; 602 chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK; 603 604 kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node, 605 chip->ngpio, 606 &bcm_kona_irq_ops, 607 kona_gpio); 608 if (!kona_gpio->irq_domain) { 609 dev_err(dev, "Couldn't allocate IRQ domain\n"); 610 return -ENXIO; 611 } 612 613 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 614 kona_gpio->reg_base = devm_ioremap_resource(dev, res); 615 if (IS_ERR(kona_gpio->reg_base)) { 616 ret = -ENXIO; 617 goto err_irq_domain; 618 } 619 620 for (i = 0; i < kona_gpio->num_bank; i++) { 621 bank = &kona_gpio->banks[i]; 622 bank->id = i; 623 bank->irq = platform_get_irq(pdev, i); 624 bank->kona_gpio = kona_gpio; 625 if (bank->irq < 0) { 626 dev_err(dev, "Couldn't get IRQ for bank %d", i); 627 ret = -ENOENT; 628 goto err_irq_domain; 629 } 630 } 631 632 dev_info(&pdev->dev, "Setting up Kona GPIO\n"); 633 634 bcm_kona_gpio_reset(kona_gpio); 635 636 ret = gpiochip_add(chip); 637 if (ret < 0) { 638 dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret); 639 goto err_irq_domain; 640 } 641 for (i = 0; i < chip->ngpio; i++) { 642 int irq = bcm_kona_gpio_to_irq(chip, i); 643 irq_set_lockdep_class(irq, &gpio_lock_class); 644 irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, 645 handle_simple_irq); 646 #ifdef CONFIG_ARM 647 set_irq_flags(irq, IRQF_VALID); 648 #else 649 irq_set_noprobe(irq); 650 #endif 651 } 652 for (i = 0; i < kona_gpio->num_bank; i++) { 653 bank = &kona_gpio->banks[i]; 654 irq_set_chained_handler(bank->irq, bcm_kona_gpio_irq_handler); 655 irq_set_handler_data(bank->irq, bank); 656 } 657 658 spin_lock_init(&kona_gpio->lock); 659 660 return 0; 661 662 err_irq_domain: 663 irq_domain_remove(kona_gpio->irq_domain); 664 665 return ret; 666 } 667 668 static struct platform_driver bcm_kona_gpio_driver = { 669 .driver = { 670 .name = "bcm-kona-gpio", 671 .owner = THIS_MODULE, 672 .of_match_table = bcm_kona_gpio_of_match, 673 }, 674 .probe = bcm_kona_gpio_probe, 675 }; 676 677 module_platform_driver(bcm_kona_gpio_driver); 678 679 MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>"); 680 MODULE_DESCRIPTION("Broadcom Kona GPIO Driver"); 681 MODULE_LICENSE("GPL v2"); 682