1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * DFL device driver for Nios private feature on Intel PAC (Programmable 4 * Acceleration Card) N3000 5 * 6 * Copyright (C) 2019-2020 Intel Corporation, Inc. 7 * 8 * Authors: 9 * Wu Hao <hao.wu@intel.com> 10 * Xu Yilun <yilun.xu@intel.com> 11 */ 12 #include <linux/bitfield.h> 13 #include <linux/dfl.h> 14 #include <linux/errno.h> 15 #include <linux/io.h> 16 #include <linux/io-64-nonatomic-lo-hi.h> 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/platform_device.h> 20 #include <linux/regmap.h> 21 #include <linux/stddef.h> 22 #include <linux/spi/altera.h> 23 #include <linux/spi/spi.h> 24 #include <linux/types.h> 25 26 /* 27 * N3000 Nios private feature registers, named as NIOS_SPI_XX on spec. 28 * NS is the abbreviation of NIOS_SPI. 29 */ 30 #define N3000_NS_PARAM 0x8 31 #define N3000_NS_PARAM_SHIFT_MODE_MSK BIT_ULL(1) 32 #define N3000_NS_PARAM_SHIFT_MODE_MSB 0 33 #define N3000_NS_PARAM_SHIFT_MODE_LSB 1 34 #define N3000_NS_PARAM_DATA_WIDTH GENMASK_ULL(7, 2) 35 #define N3000_NS_PARAM_NUM_CS GENMASK_ULL(13, 8) 36 #define N3000_NS_PARAM_CLK_POL BIT_ULL(14) 37 #define N3000_NS_PARAM_CLK_PHASE BIT_ULL(15) 38 #define N3000_NS_PARAM_PERIPHERAL_ID GENMASK_ULL(47, 32) 39 40 #define N3000_NS_CTRL 0x10 41 #define N3000_NS_CTRL_WR_DATA GENMASK_ULL(31, 0) 42 #define N3000_NS_CTRL_ADDR GENMASK_ULL(44, 32) 43 #define N3000_NS_CTRL_CMD_MSK GENMASK_ULL(63, 62) 44 #define N3000_NS_CTRL_CMD_NOP 0 45 #define N3000_NS_CTRL_CMD_RD 1 46 #define N3000_NS_CTRL_CMD_WR 2 47 48 #define N3000_NS_STAT 0x18 49 #define N3000_NS_STAT_RD_DATA GENMASK_ULL(31, 0) 50 #define N3000_NS_STAT_RW_VAL BIT_ULL(32) 51 52 /* Nios handshake registers, indirect access */ 53 #define N3000_NIOS_INIT 0x1000 54 #define N3000_NIOS_INIT_DONE BIT(0) 55 #define N3000_NIOS_INIT_START BIT(1) 56 /* Mode for retimer A, link 0, the same below */ 57 #define N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK GENMASK(9, 8) 58 #define N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK GENMASK(11, 10) 59 #define N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK GENMASK(13, 12) 60 #define N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK GENMASK(15, 14) 61 #define N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK GENMASK(17, 16) 62 #define N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK GENMASK(19, 18) 63 #define N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK GENMASK(21, 20) 64 #define N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK GENMASK(23, 22) 65 #define N3000_NIOS_INIT_REQ_FEC_MODE_NO 0x0 66 #define N3000_NIOS_INIT_REQ_FEC_MODE_KR 0x1 67 #define N3000_NIOS_INIT_REQ_FEC_MODE_RS 0x2 68 69 #define N3000_NIOS_FW_VERSION 0x1004 70 #define N3000_NIOS_FW_VERSION_PATCH GENMASK(23, 20) 71 #define N3000_NIOS_FW_VERSION_MINOR GENMASK(27, 24) 72 #define N3000_NIOS_FW_VERSION_MAJOR GENMASK(31, 28) 73 74 /* The retimers we use on Intel PAC N3000 is Parkvale, abbreviated to PKVL */ 75 #define N3000_NIOS_PKVL_A_MODE_STS 0x1020 76 #define N3000_NIOS_PKVL_B_MODE_STS 0x1024 77 #define N3000_NIOS_PKVL_MODE_STS_GROUP_MSK GENMASK(15, 8) 78 #define N3000_NIOS_PKVL_MODE_STS_GROUP_OK 0x0 79 #define N3000_NIOS_PKVL_MODE_STS_ID_MSK GENMASK(7, 0) 80 /* When GROUP MASK field == GROUP_OK */ 81 #define N3000_NIOS_PKVL_MODE_ID_RESET 0x0 82 #define N3000_NIOS_PKVL_MODE_ID_4X10G 0x1 83 #define N3000_NIOS_PKVL_MODE_ID_4X25G 0x2 84 #define N3000_NIOS_PKVL_MODE_ID_2X25G 0x3 85 #define N3000_NIOS_PKVL_MODE_ID_2X25G_2X10G 0x4 86 #define N3000_NIOS_PKVL_MODE_ID_1X25G 0x5 87 88 #define N3000_NIOS_REGBUS_RETRY_COUNT 10000 /* loop count */ 89 90 #define N3000_NIOS_INIT_TIMEOUT 10000000 /* usec */ 91 #define N3000_NIOS_INIT_TIME_INTV 100000 /* usec */ 92 93 #define N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL \ 94 (N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK | \ 95 N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK | \ 96 N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK | \ 97 N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK | \ 98 N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK | \ 99 N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK | \ 100 N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK | \ 101 N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK) 102 103 #define N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL \ 104 (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ 105 N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ 106 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ 107 N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ 108 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ 109 N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ 110 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ 111 N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ 112 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ 113 N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ 114 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ 115 N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ 116 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ 117 N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ 118 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ 119 N3000_NIOS_INIT_REQ_FEC_MODE_NO)) 120 121 #define N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL \ 122 (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ 123 N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ 124 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ 125 N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ 126 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ 127 N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ 128 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ 129 N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ 130 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ 131 N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ 132 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ 133 N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ 134 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ 135 N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ 136 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ 137 N3000_NIOS_INIT_REQ_FEC_MODE_KR)) 138 139 #define N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL \ 140 (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ 141 N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ 142 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ 143 N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ 144 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ 145 N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ 146 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ 147 N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ 148 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ 149 N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ 150 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ 151 N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ 152 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ 153 N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ 154 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ 155 N3000_NIOS_INIT_REQ_FEC_MODE_RS)) 156 157 struct n3000_nios { 158 void __iomem *base; 159 struct regmap *regmap; 160 struct device *dev; 161 struct platform_device *altera_spi; 162 }; 163 164 static ssize_t nios_fw_version_show(struct device *dev, 165 struct device_attribute *attr, char *buf) 166 { 167 struct n3000_nios *nn = dev_get_drvdata(dev); 168 unsigned int val; 169 int ret; 170 171 ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); 172 if (ret) 173 return ret; 174 175 return sysfs_emit(buf, "%x.%x.%x\n", 176 (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val), 177 (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MINOR, val), 178 (u8)FIELD_GET(N3000_NIOS_FW_VERSION_PATCH, val)); 179 } 180 static DEVICE_ATTR_RO(nios_fw_version); 181 182 #define IS_MODE_STATUS_OK(mode_stat) \ 183 (FIELD_GET(N3000_NIOS_PKVL_MODE_STS_GROUP_MSK, (mode_stat)) == \ 184 N3000_NIOS_PKVL_MODE_STS_GROUP_OK) 185 186 #define IS_RETIMER_FEC_SUPPORTED(retimer_mode) \ 187 ((retimer_mode) != N3000_NIOS_PKVL_MODE_ID_RESET && \ 188 (retimer_mode) != N3000_NIOS_PKVL_MODE_ID_4X10G) 189 190 static int get_retimer_mode(struct n3000_nios *nn, unsigned int mode_stat_reg, 191 unsigned int *retimer_mode) 192 { 193 unsigned int val; 194 int ret; 195 196 ret = regmap_read(nn->regmap, mode_stat_reg, &val); 197 if (ret) 198 return ret; 199 200 if (!IS_MODE_STATUS_OK(val)) 201 return -EFAULT; 202 203 *retimer_mode = FIELD_GET(N3000_NIOS_PKVL_MODE_STS_ID_MSK, val); 204 205 return 0; 206 } 207 208 static ssize_t retimer_A_mode_show(struct device *dev, 209 struct device_attribute *attr, char *buf) 210 { 211 struct n3000_nios *nn = dev_get_drvdata(dev); 212 unsigned int mode; 213 int ret; 214 215 ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &mode); 216 if (ret) 217 return ret; 218 219 return sysfs_emit(buf, "0x%x\n", mode); 220 } 221 static DEVICE_ATTR_RO(retimer_A_mode); 222 223 static ssize_t retimer_B_mode_show(struct device *dev, 224 struct device_attribute *attr, char *buf) 225 { 226 struct n3000_nios *nn = dev_get_drvdata(dev); 227 unsigned int mode; 228 int ret; 229 230 ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &mode); 231 if (ret) 232 return ret; 233 234 return sysfs_emit(buf, "0x%x\n", mode); 235 } 236 static DEVICE_ATTR_RO(retimer_B_mode); 237 238 static ssize_t fec_mode_show(struct device *dev, 239 struct device_attribute *attr, char *buf) 240 { 241 unsigned int val, retimer_a_mode, retimer_b_mode, fec_modes; 242 struct n3000_nios *nn = dev_get_drvdata(dev); 243 int ret; 244 245 /* FEC mode setting is not supported in early FW versions */ 246 ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); 247 if (ret) 248 return ret; 249 250 if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) < 3) 251 return sysfs_emit(buf, "not supported\n"); 252 253 /* If no 25G links, FEC mode setting is not supported either */ 254 ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &retimer_a_mode); 255 if (ret) 256 return ret; 257 258 ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &retimer_b_mode); 259 if (ret) 260 return ret; 261 262 if (!IS_RETIMER_FEC_SUPPORTED(retimer_a_mode) && 263 !IS_RETIMER_FEC_SUPPORTED(retimer_b_mode)) 264 return sysfs_emit(buf, "not supported\n"); 265 266 /* get the valid FEC mode for 25G links */ 267 ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val); 268 if (ret) 269 return ret; 270 271 /* 272 * FEC mode should always be the same for all links, as we set them 273 * in this way. 274 */ 275 fec_modes = (val & N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL); 276 if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL) 277 return sysfs_emit(buf, "no\n"); 278 else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL) 279 return sysfs_emit(buf, "kr\n"); 280 else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL) 281 return sysfs_emit(buf, "rs\n"); 282 283 return -EFAULT; 284 } 285 static DEVICE_ATTR_RO(fec_mode); 286 287 static struct attribute *n3000_nios_attrs[] = { 288 &dev_attr_nios_fw_version.attr, 289 &dev_attr_retimer_A_mode.attr, 290 &dev_attr_retimer_B_mode.attr, 291 &dev_attr_fec_mode.attr, 292 NULL, 293 }; 294 ATTRIBUTE_GROUPS(n3000_nios); 295 296 static int n3000_nios_init_done_check(struct n3000_nios *nn) 297 { 298 unsigned int val, state_a, state_b; 299 struct device *dev = nn->dev; 300 int ret, ret2; 301 302 /* 303 * The SPI is shared by the Nios core inside the FPGA, Nios will use 304 * this SPI master to do some one time initialization after power up, 305 * and then release the control to OS. The driver needs to poll on 306 * INIT_DONE to see when driver could take the control. 307 * 308 * Please note that after Nios firmware version 3.0.0, INIT_START is 309 * introduced, so driver needs to trigger START firstly and then check 310 * INIT_DONE. 311 */ 312 313 ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); 314 if (ret) 315 return ret; 316 317 /* 318 * If Nios version register is totally uninitialized(== 0x0), then the 319 * Nios firmware is missing. So host could take control of SPI master 320 * safely, but initialization work for Nios is not done. To restore the 321 * card, we need to reprogram a new Nios firmware via the BMC chip on 322 * SPI bus. So the driver doesn't error out, it continues to create the 323 * spi controller device and spi_board_info for BMC. 324 */ 325 if (val == 0) { 326 dev_err(dev, "Nios version reg = 0x%x, skip INIT_DONE check, but the retimer may be uninitialized\n", 327 val); 328 return 0; 329 } 330 331 if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) >= 3) { 332 /* read NIOS_INIT to check if retimer initialization is done */ 333 ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val); 334 if (ret) 335 return ret; 336 337 /* check if retimers are initialized already */ 338 if (val & (N3000_NIOS_INIT_DONE | N3000_NIOS_INIT_START)) 339 goto nios_init_done; 340 341 /* configure FEC mode per module param */ 342 val = N3000_NIOS_INIT_START; 343 344 /* 345 * When the retimer is to be set to 10G mode, there is no FEC 346 * mode setting, so the REQ_FEC_MODE field will be ignored by 347 * Nios firmware in this case. But we should still fill the FEC 348 * mode field cause host could not get the retimer working mode 349 * until the Nios init is done. 350 * 351 * For now the driver doesn't support the retimer FEC mode 352 * switching per user's request. It is always set to Reed 353 * Solomon FEC. 354 * 355 * The driver will set the same FEC mode for all links. 356 */ 357 val |= N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL; 358 359 ret = regmap_write(nn->regmap, N3000_NIOS_INIT, val); 360 if (ret) 361 return ret; 362 } 363 364 nios_init_done: 365 /* polls on NIOS_INIT_DONE */ 366 ret = regmap_read_poll_timeout(nn->regmap, N3000_NIOS_INIT, val, 367 val & N3000_NIOS_INIT_DONE, 368 N3000_NIOS_INIT_TIME_INTV, 369 N3000_NIOS_INIT_TIMEOUT); 370 if (ret) 371 dev_err(dev, "NIOS_INIT_DONE %s\n", 372 (ret == -ETIMEDOUT) ? "timed out" : "check error"); 373 374 ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_A_MODE_STS, &state_a); 375 if (ret2) 376 return ret2; 377 378 ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_B_MODE_STS, &state_b); 379 if (ret2) 380 return ret2; 381 382 if (!ret) { 383 /* 384 * After INIT_DONE is detected, it still needs to check if the 385 * Nios firmware reports any error during the retimer 386 * configuration. 387 */ 388 if (IS_MODE_STATUS_OK(state_a) && IS_MODE_STATUS_OK(state_b)) 389 return 0; 390 391 /* 392 * If the retimer configuration is failed, the Nios firmware 393 * will still release the spi controller for host to 394 * communicate with the BMC. It makes possible for people to 395 * reprogram a new Nios firmware and restore the card. So the 396 * driver doesn't error out, it continues to create the spi 397 * controller device and spi_board_info for BMC. 398 */ 399 dev_err(dev, "NIOS_INIT_DONE OK, but err on retimer init\n"); 400 } 401 402 dev_err(nn->dev, "PKVL_A_MODE_STS 0x%x\n", state_a); 403 dev_err(nn->dev, "PKVL_B_MODE_STS 0x%x\n", state_b); 404 405 return ret; 406 } 407 408 static struct spi_board_info m10_n3000_info = { 409 .modalias = "m10-n3000", 410 .max_speed_hz = 12500000, 411 .bus_num = 0, 412 .chip_select = 0, 413 }; 414 415 static int create_altera_spi_controller(struct n3000_nios *nn) 416 { 417 struct altera_spi_platform_data pdata = { 0 }; 418 struct platform_device_info pdevinfo = { 0 }; 419 void __iomem *base = nn->base; 420 u64 v; 421 422 v = readq(base + N3000_NS_PARAM); 423 424 pdata.mode_bits = SPI_CS_HIGH; 425 if (FIELD_GET(N3000_NS_PARAM_CLK_POL, v)) 426 pdata.mode_bits |= SPI_CPOL; 427 if (FIELD_GET(N3000_NS_PARAM_CLK_PHASE, v)) 428 pdata.mode_bits |= SPI_CPHA; 429 430 pdata.num_chipselect = FIELD_GET(N3000_NS_PARAM_NUM_CS, v); 431 pdata.bits_per_word_mask = 432 SPI_BPW_RANGE_MASK(1, FIELD_GET(N3000_NS_PARAM_DATA_WIDTH, v)); 433 434 pdata.num_devices = 1; 435 pdata.devices = &m10_n3000_info; 436 437 dev_dbg(nn->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__, 438 pdata.num_chipselect, pdata.bits_per_word_mask, 439 pdata.mode_bits); 440 441 pdevinfo.name = "subdev_spi_altera"; 442 pdevinfo.id = PLATFORM_DEVID_AUTO; 443 pdevinfo.parent = nn->dev; 444 pdevinfo.data = &pdata; 445 pdevinfo.size_data = sizeof(pdata); 446 447 nn->altera_spi = platform_device_register_full(&pdevinfo); 448 return PTR_ERR_OR_ZERO(nn->altera_spi); 449 } 450 451 static void destroy_altera_spi_controller(struct n3000_nios *nn) 452 { 453 platform_device_unregister(nn->altera_spi); 454 } 455 456 static int n3000_nios_poll_stat_timeout(void __iomem *base, u64 *v) 457 { 458 int loops; 459 460 /* 461 * We don't use the time based timeout here for performance. 462 * 463 * The regbus read/write is on the critical path of Intel PAC N3000 464 * image programming. The time based timeout checking will add too much 465 * overhead on it. Usually the state changes in 1 or 2 loops on the 466 * test server, and we set 10000 times loop here for safety. 467 */ 468 for (loops = N3000_NIOS_REGBUS_RETRY_COUNT; loops > 0 ; loops--) { 469 *v = readq(base + N3000_NS_STAT); 470 if (*v & N3000_NS_STAT_RW_VAL) 471 break; 472 cpu_relax(); 473 } 474 475 return (loops > 0) ? 0 : -ETIMEDOUT; 476 } 477 478 static int n3000_nios_reg_write(void *context, unsigned int reg, unsigned int val) 479 { 480 struct n3000_nios *nn = context; 481 u64 v; 482 int ret; 483 484 v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_WR) | 485 FIELD_PREP(N3000_NS_CTRL_ADDR, reg) | 486 FIELD_PREP(N3000_NS_CTRL_WR_DATA, val); 487 writeq(v, nn->base + N3000_NS_CTRL); 488 489 ret = n3000_nios_poll_stat_timeout(nn->base, &v); 490 if (ret) 491 dev_err(nn->dev, "fail to write reg 0x%x val 0x%x: %d\n", 492 reg, val, ret); 493 494 return ret; 495 } 496 497 static int n3000_nios_reg_read(void *context, unsigned int reg, unsigned int *val) 498 { 499 struct n3000_nios *nn = context; 500 u64 v; 501 int ret; 502 503 v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_RD) | 504 FIELD_PREP(N3000_NS_CTRL_ADDR, reg); 505 writeq(v, nn->base + N3000_NS_CTRL); 506 507 ret = n3000_nios_poll_stat_timeout(nn->base, &v); 508 if (ret) 509 dev_err(nn->dev, "fail to read reg 0x%x: %d\n", reg, ret); 510 else 511 *val = FIELD_GET(N3000_NS_STAT_RD_DATA, v); 512 513 return ret; 514 } 515 516 static const struct regmap_config n3000_nios_regbus_cfg = { 517 .reg_bits = 32, 518 .reg_stride = 4, 519 .val_bits = 32, 520 .fast_io = true, 521 522 .reg_write = n3000_nios_reg_write, 523 .reg_read = n3000_nios_reg_read, 524 }; 525 526 static int n3000_nios_probe(struct dfl_device *ddev) 527 { 528 struct device *dev = &ddev->dev; 529 struct n3000_nios *nn; 530 int ret; 531 532 nn = devm_kzalloc(dev, sizeof(*nn), GFP_KERNEL); 533 if (!nn) 534 return -ENOMEM; 535 536 dev_set_drvdata(&ddev->dev, nn); 537 538 nn->dev = dev; 539 540 nn->base = devm_ioremap_resource(&ddev->dev, &ddev->mmio_res); 541 if (IS_ERR(nn->base)) 542 return PTR_ERR(nn->base); 543 544 nn->regmap = devm_regmap_init(dev, NULL, nn, &n3000_nios_regbus_cfg); 545 if (IS_ERR(nn->regmap)) 546 return PTR_ERR(nn->regmap); 547 548 ret = n3000_nios_init_done_check(nn); 549 if (ret) 550 return ret; 551 552 ret = create_altera_spi_controller(nn); 553 if (ret) 554 dev_err(dev, "altera spi controller create failed: %d\n", ret); 555 556 return ret; 557 } 558 559 static void n3000_nios_remove(struct dfl_device *ddev) 560 { 561 struct n3000_nios *nn = dev_get_drvdata(&ddev->dev); 562 563 destroy_altera_spi_controller(nn); 564 } 565 566 #define FME_FEATURE_ID_N3000_NIOS 0xd 567 568 static const struct dfl_device_id n3000_nios_ids[] = { 569 { FME_ID, FME_FEATURE_ID_N3000_NIOS }, 570 { } 571 }; 572 MODULE_DEVICE_TABLE(dfl, n3000_nios_ids); 573 574 static struct dfl_driver n3000_nios_driver = { 575 .drv = { 576 .name = "dfl-n3000-nios", 577 .dev_groups = n3000_nios_groups, 578 }, 579 .id_table = n3000_nios_ids, 580 .probe = n3000_nios_probe, 581 .remove = n3000_nios_remove, 582 }; 583 584 module_dfl_driver(n3000_nios_driver); 585 586 MODULE_DESCRIPTION("Driver for Nios private feature on Intel PAC N3000"); 587 MODULE_AUTHOR("Intel Corporation"); 588 MODULE_LICENSE("GPL v2"); 589