1 /* 2 * Altera Passive Serial SPI Driver 3 * 4 * Copyright (c) 2017 United Western Technologies, Corporation 5 * 6 * Joshua Clayton <stillcompiling@gmail.com> 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms and conditions of the GNU General Public License, 10 * version 2, as published by the Free Software Foundation. 11 * 12 * Manage Altera FPGA firmware that is loaded over SPI using the passive 13 * serial configuration method. 14 * Firmware must be in binary "rbf" format. 15 * Works on Arria 10, Cyclone V and Stratix V. Should work on Cyclone series. 16 * May work on other Altera FPGAs. 17 */ 18 19 #include <linux/bitrev.h> 20 #include <linux/delay.h> 21 #include <linux/fpga/fpga-mgr.h> 22 #include <linux/gpio/consumer.h> 23 #include <linux/module.h> 24 #include <linux/of_gpio.h> 25 #include <linux/of_device.h> 26 #include <linux/spi/spi.h> 27 #include <linux/sizes.h> 28 29 enum altera_ps_devtype { 30 CYCLONE5, 31 ARRIA10, 32 }; 33 34 struct altera_ps_data { 35 enum altera_ps_devtype devtype; 36 int status_wait_min_us; 37 int status_wait_max_us; 38 int t_cfg_us; 39 int t_st2ck_us; 40 }; 41 42 struct altera_ps_conf { 43 struct gpio_desc *config; 44 struct gpio_desc *confd; 45 struct gpio_desc *status; 46 struct spi_device *spi; 47 const struct altera_ps_data *data; 48 u32 info_flags; 49 char mgr_name[64]; 50 }; 51 52 /* | Arria 10 | Cyclone5 | Stratix5 | 53 * t_CF2ST0 | [; 600] | [; 600] | [; 600] |ns 54 * t_CFG | [2;] | [2;] | [2;] |µs 55 * t_STATUS | [268; 3000] | [268; 1506] | [268; 1506] |µs 56 * t_CF2ST1 | [; 3000] | [; 1506] | [; 1506] |µs 57 * t_CF2CK | [3010;] | [1506;] | [1506;] |µs 58 * t_ST2CK | [10;] | [2;] | [2;] |µs 59 * t_CD2UM | [175; 830] | [175; 437] | [175; 437] |µs 60 */ 61 static struct altera_ps_data c5_data = { 62 /* these values for Cyclone5 are compatible with Stratix5 */ 63 .devtype = CYCLONE5, 64 .status_wait_min_us = 268, 65 .status_wait_max_us = 1506, 66 .t_cfg_us = 2, 67 .t_st2ck_us = 2, 68 }; 69 70 static struct altera_ps_data a10_data = { 71 .devtype = ARRIA10, 72 .status_wait_min_us = 268, /* min(t_STATUS) */ 73 .status_wait_max_us = 3000, /* max(t_CF2ST1) */ 74 .t_cfg_us = 2, /* max { min(t_CFG), max(tCF2ST0) } */ 75 .t_st2ck_us = 10, /* min(t_ST2CK) */ 76 }; 77 78 static const struct of_device_id of_ef_match[] = { 79 { .compatible = "altr,fpga-passive-serial", .data = &c5_data }, 80 { .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data }, 81 {} 82 }; 83 MODULE_DEVICE_TABLE(of, of_ef_match); 84 85 static enum fpga_mgr_states altera_ps_state(struct fpga_manager *mgr) 86 { 87 struct altera_ps_conf *conf = mgr->priv; 88 89 if (gpiod_get_value_cansleep(conf->status)) 90 return FPGA_MGR_STATE_RESET; 91 92 return FPGA_MGR_STATE_UNKNOWN; 93 } 94 95 static inline void altera_ps_delay(int delay_us) 96 { 97 if (delay_us > 10) 98 usleep_range(delay_us, delay_us + 5); 99 else 100 udelay(delay_us); 101 } 102 103 static int altera_ps_write_init(struct fpga_manager *mgr, 104 struct fpga_image_info *info, 105 const char *buf, size_t count) 106 { 107 struct altera_ps_conf *conf = mgr->priv; 108 int min, max, waits; 109 int i; 110 111 conf->info_flags = info->flags; 112 113 if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { 114 dev_err(&mgr->dev, "Partial reconfiguration not supported.\n"); 115 return -EINVAL; 116 } 117 118 gpiod_set_value_cansleep(conf->config, 1); 119 120 /* wait min reset pulse time */ 121 altera_ps_delay(conf->data->t_cfg_us); 122 123 if (!gpiod_get_value_cansleep(conf->status)) { 124 dev_err(&mgr->dev, "Status pin failed to show a reset\n"); 125 return -EIO; 126 } 127 128 gpiod_set_value_cansleep(conf->config, 0); 129 130 min = conf->data->status_wait_min_us; 131 max = conf->data->status_wait_max_us; 132 waits = max / min; 133 if (max % min) 134 waits++; 135 136 /* wait for max { max(t_STATUS), max(t_CF2ST1) } */ 137 for (i = 0; i < waits; i++) { 138 usleep_range(min, min + 10); 139 if (!gpiod_get_value_cansleep(conf->status)) { 140 /* wait for min(t_ST2CK)*/ 141 altera_ps_delay(conf->data->t_st2ck_us); 142 return 0; 143 } 144 } 145 146 dev_err(&mgr->dev, "Status pin not ready.\n"); 147 return -EIO; 148 } 149 150 static void rev_buf(char *buf, size_t len) 151 { 152 u32 *fw32 = (u32 *)buf; 153 size_t extra_bytes = (len & 0x03); 154 const u32 *fw_end = (u32 *)(buf + len - extra_bytes); 155 156 /* set buffer to lsb first */ 157 while (fw32 < fw_end) { 158 *fw32 = bitrev8x4(*fw32); 159 fw32++; 160 } 161 162 if (extra_bytes) { 163 buf = (char *)fw_end; 164 while (extra_bytes) { 165 *buf = bitrev8(*buf); 166 buf++; 167 extra_bytes--; 168 } 169 } 170 } 171 172 static int altera_ps_write(struct fpga_manager *mgr, const char *buf, 173 size_t count) 174 { 175 struct altera_ps_conf *conf = mgr->priv; 176 const char *fw_data = buf; 177 const char *fw_data_end = fw_data + count; 178 179 while (fw_data < fw_data_end) { 180 int ret; 181 size_t stride = min_t(size_t, fw_data_end - fw_data, SZ_4K); 182 183 if (!(conf->info_flags & FPGA_MGR_BITSTREAM_LSB_FIRST)) 184 rev_buf((char *)fw_data, stride); 185 186 ret = spi_write(conf->spi, fw_data, stride); 187 if (ret) { 188 dev_err(&mgr->dev, "spi error in firmware write: %d\n", 189 ret); 190 return ret; 191 } 192 fw_data += stride; 193 } 194 195 return 0; 196 } 197 198 static int altera_ps_write_complete(struct fpga_manager *mgr, 199 struct fpga_image_info *info) 200 { 201 struct altera_ps_conf *conf = mgr->priv; 202 const char dummy[] = {0}; 203 int ret; 204 205 if (gpiod_get_value_cansleep(conf->status)) { 206 dev_err(&mgr->dev, "Error during configuration.\n"); 207 return -EIO; 208 } 209 210 if (!IS_ERR(conf->confd)) { 211 if (!gpiod_get_raw_value_cansleep(conf->confd)) { 212 dev_err(&mgr->dev, "CONF_DONE is inactive!\n"); 213 return -EIO; 214 } 215 } 216 217 /* 218 * After CONF_DONE goes high, send two additional falling edges on DCLK 219 * to begin initialization and enter user mode 220 */ 221 ret = spi_write(conf->spi, dummy, 1); 222 if (ret) { 223 dev_err(&mgr->dev, "spi error during end sequence: %d\n", ret); 224 return ret; 225 } 226 227 return 0; 228 } 229 230 static const struct fpga_manager_ops altera_ps_ops = { 231 .state = altera_ps_state, 232 .write_init = altera_ps_write_init, 233 .write = altera_ps_write, 234 .write_complete = altera_ps_write_complete, 235 }; 236 237 static int altera_ps_probe(struct spi_device *spi) 238 { 239 struct altera_ps_conf *conf; 240 const struct of_device_id *of_id; 241 242 conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL); 243 if (!conf) 244 return -ENOMEM; 245 246 of_id = of_match_device(of_ef_match, &spi->dev); 247 if (!of_id) 248 return -ENODEV; 249 250 conf->data = of_id->data; 251 conf->spi = spi; 252 conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW); 253 if (IS_ERR(conf->config)) { 254 dev_err(&spi->dev, "Failed to get config gpio: %ld\n", 255 PTR_ERR(conf->config)); 256 return PTR_ERR(conf->config); 257 } 258 259 conf->status = devm_gpiod_get(&spi->dev, "nstat", GPIOD_IN); 260 if (IS_ERR(conf->status)) { 261 dev_err(&spi->dev, "Failed to get status gpio: %ld\n", 262 PTR_ERR(conf->status)); 263 return PTR_ERR(conf->status); 264 } 265 266 conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN); 267 if (IS_ERR(conf->confd)) { 268 dev_warn(&spi->dev, "Not using confd gpio: %ld\n", 269 PTR_ERR(conf->confd)); 270 } 271 272 /* Register manager with unique name */ 273 snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s %s", 274 dev_driver_string(&spi->dev), dev_name(&spi->dev)); 275 276 return fpga_mgr_register(&spi->dev, conf->mgr_name, 277 &altera_ps_ops, conf); 278 } 279 280 static int altera_ps_remove(struct spi_device *spi) 281 { 282 fpga_mgr_unregister(&spi->dev); 283 284 return 0; 285 } 286 287 static const struct spi_device_id altera_ps_spi_ids[] = { 288 {"cyclone-ps-spi", 0}, 289 {} 290 }; 291 MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids); 292 293 static struct spi_driver altera_ps_driver = { 294 .driver = { 295 .name = "altera-ps-spi", 296 .owner = THIS_MODULE, 297 .of_match_table = of_match_ptr(of_ef_match), 298 }, 299 .id_table = altera_ps_spi_ids, 300 .probe = altera_ps_probe, 301 .remove = altera_ps_remove, 302 }; 303 304 module_spi_driver(altera_ps_driver) 305 306 MODULE_LICENSE("GPL v2"); 307 MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>"); 308 MODULE_DESCRIPTION("Module to load Altera FPGA firmware over SPI"); 309