1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Xilinx Zynq MPSoC Firmware layer 4 * 5 * Copyright (C) 2014-2022 Xilinx, Inc. 6 * 7 * Michal Simek <michal.simek@xilinx.com> 8 * Davorin Mista <davorin.mista@aggios.com> 9 * Jolly Shah <jollys@xilinx.com> 10 * Rajan Vaja <rajanv@xilinx.com> 11 */ 12 13 #include <linux/arm-smccc.h> 14 #include <linux/compiler.h> 15 #include <linux/device.h> 16 #include <linux/init.h> 17 #include <linux/mfd/core.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_platform.h> 21 #include <linux/slab.h> 22 #include <linux/uaccess.h> 23 #include <linux/hashtable.h> 24 25 #include <linux/firmware/xlnx-zynqmp.h> 26 #include <linux/firmware/xlnx-event-manager.h> 27 #include "zynqmp-debug.h" 28 29 /* Max HashMap Order for PM API feature check (1<<7 = 128) */ 30 #define PM_API_FEATURE_CHECK_MAX_ORDER 7 31 32 /* CRL registers and bitfields */ 33 #define CRL_APB_BASE 0xFF5E0000U 34 /* BOOT_PIN_CTRL- Used to control the mode pins after boot */ 35 #define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + (0x250U)) 36 /* BOOT_PIN_CTRL_MASK- out_val[11:8], out_en[3:0] */ 37 #define CRL_APB_BOOTPIN_CTRL_MASK 0xF0FU 38 39 /* IOCTL/QUERY feature payload size */ 40 #define FEATURE_PAYLOAD_SIZE 2 41 42 /* Firmware feature check version mask */ 43 #define FIRMWARE_VERSION_MASK GENMASK(15, 0) 44 45 static bool feature_check_enabled; 46 static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER); 47 static u32 ioctl_features[FEATURE_PAYLOAD_SIZE]; 48 static u32 query_features[FEATURE_PAYLOAD_SIZE]; 49 50 static struct platform_device *em_dev; 51 52 /** 53 * struct zynqmp_devinfo - Structure for Zynqmp device instance 54 * @dev: Device Pointer 55 * @feature_conf_id: Feature conf id 56 */ 57 struct zynqmp_devinfo { 58 struct device *dev; 59 u32 feature_conf_id; 60 }; 61 62 /** 63 * struct pm_api_feature_data - PM API Feature data 64 * @pm_api_id: PM API Id, used as key to index into hashmap 65 * @feature_status: status of PM API feature: valid, invalid 66 * @hentry: hlist_node that hooks this entry into hashtable 67 */ 68 struct pm_api_feature_data { 69 u32 pm_api_id; 70 int feature_status; 71 struct hlist_node hentry; 72 }; 73 74 static const struct mfd_cell firmware_devs[] = { 75 { 76 .name = "zynqmp_power_controller", 77 }, 78 }; 79 80 /** 81 * zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes 82 * @ret_status: PMUFW return code 83 * 84 * Return: corresponding Linux error code 85 */ 86 static int zynqmp_pm_ret_code(u32 ret_status) 87 { 88 switch (ret_status) { 89 case XST_PM_SUCCESS: 90 case XST_PM_DOUBLE_REQ: 91 return 0; 92 case XST_PM_NO_FEATURE: 93 return -ENOTSUPP; 94 case XST_PM_NO_ACCESS: 95 return -EACCES; 96 case XST_PM_ABORT_SUSPEND: 97 return -ECANCELED; 98 case XST_PM_MULT_USER: 99 return -EUSERS; 100 case XST_PM_INTERNAL: 101 case XST_PM_CONFLICT: 102 case XST_PM_INVALID_NODE: 103 default: 104 return -EINVAL; 105 } 106 } 107 108 static noinline int do_fw_call_fail(u64 arg0, u64 arg1, u64 arg2, 109 u32 *ret_payload) 110 { 111 return -ENODEV; 112 } 113 114 /* 115 * PM function call wrapper 116 * Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration 117 */ 118 static int (*do_fw_call)(u64, u64, u64, u32 *ret_payload) = do_fw_call_fail; 119 120 /** 121 * do_fw_call_smc() - Call system-level platform management layer (SMC) 122 * @arg0: Argument 0 to SMC call 123 * @arg1: Argument 1 to SMC call 124 * @arg2: Argument 2 to SMC call 125 * @ret_payload: Returned value array 126 * 127 * Invoke platform management function via SMC call (no hypervisor present). 128 * 129 * Return: Returns status, either success or error+reason 130 */ 131 static noinline int do_fw_call_smc(u64 arg0, u64 arg1, u64 arg2, 132 u32 *ret_payload) 133 { 134 struct arm_smccc_res res; 135 136 arm_smccc_smc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res); 137 138 if (ret_payload) { 139 ret_payload[0] = lower_32_bits(res.a0); 140 ret_payload[1] = upper_32_bits(res.a0); 141 ret_payload[2] = lower_32_bits(res.a1); 142 ret_payload[3] = upper_32_bits(res.a1); 143 } 144 145 return zynqmp_pm_ret_code((enum pm_ret_status)res.a0); 146 } 147 148 /** 149 * do_fw_call_hvc() - Call system-level platform management layer (HVC) 150 * @arg0: Argument 0 to HVC call 151 * @arg1: Argument 1 to HVC call 152 * @arg2: Argument 2 to HVC call 153 * @ret_payload: Returned value array 154 * 155 * Invoke platform management function via HVC 156 * HVC-based for communication through hypervisor 157 * (no direct communication with ATF). 158 * 159 * Return: Returns status, either success or error+reason 160 */ 161 static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2, 162 u32 *ret_payload) 163 { 164 struct arm_smccc_res res; 165 166 arm_smccc_hvc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res); 167 168 if (ret_payload) { 169 ret_payload[0] = lower_32_bits(res.a0); 170 ret_payload[1] = upper_32_bits(res.a0); 171 ret_payload[2] = lower_32_bits(res.a1); 172 ret_payload[3] = upper_32_bits(res.a1); 173 } 174 175 return zynqmp_pm_ret_code((enum pm_ret_status)res.a0); 176 } 177 178 static int __do_feature_check_call(const u32 api_id, u32 *ret_payload) 179 { 180 int ret; 181 u64 smc_arg[2]; 182 183 smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK; 184 smc_arg[1] = api_id; 185 186 ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload); 187 if (ret) 188 ret = -EOPNOTSUPP; 189 else 190 ret = ret_payload[1]; 191 192 return ret; 193 } 194 195 static int do_feature_check_call(const u32 api_id) 196 { 197 int ret; 198 u32 ret_payload[PAYLOAD_ARG_CNT]; 199 struct pm_api_feature_data *feature_data; 200 201 /* Check for existing entry in hash table for given api */ 202 hash_for_each_possible(pm_api_features_map, feature_data, hentry, 203 api_id) { 204 if (feature_data->pm_api_id == api_id) 205 return feature_data->feature_status; 206 } 207 208 /* Add new entry if not present */ 209 feature_data = kmalloc(sizeof(*feature_data), GFP_KERNEL); 210 if (!feature_data) 211 return -ENOMEM; 212 213 feature_data->pm_api_id = api_id; 214 ret = __do_feature_check_call(api_id, ret_payload); 215 216 feature_data->feature_status = ret; 217 hash_add(pm_api_features_map, &feature_data->hentry, api_id); 218 219 if (api_id == PM_IOCTL) 220 /* Store supported IOCTL IDs mask */ 221 memcpy(ioctl_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4); 222 else if (api_id == PM_QUERY_DATA) 223 /* Store supported QUERY IDs mask */ 224 memcpy(query_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4); 225 226 return ret; 227 } 228 EXPORT_SYMBOL_GPL(zynqmp_pm_feature); 229 230 /** 231 * zynqmp_pm_feature() - Check whether given feature is supported or not and 232 * store supported IOCTL/QUERY ID mask 233 * @api_id: API ID to check 234 * 235 * Return: Returns status, either success or error+reason 236 */ 237 int zynqmp_pm_feature(const u32 api_id) 238 { 239 int ret; 240 241 if (!feature_check_enabled) 242 return 0; 243 244 ret = do_feature_check_call(api_id); 245 246 return ret; 247 } 248 249 /** 250 * zynqmp_pm_is_function_supported() - Check whether given IOCTL/QUERY function 251 * is supported or not 252 * @api_id: PM_IOCTL or PM_QUERY_DATA 253 * @id: IOCTL or QUERY function IDs 254 * 255 * Return: Returns status, either success or error+reason 256 */ 257 int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id) 258 { 259 int ret; 260 u32 *bit_mask; 261 262 /* Input arguments validation */ 263 if (id >= 64 || (api_id != PM_IOCTL && api_id != PM_QUERY_DATA)) 264 return -EINVAL; 265 266 /* Check feature check API version */ 267 ret = do_feature_check_call(PM_FEATURE_CHECK); 268 if (ret < 0) 269 return ret; 270 271 /* Check if feature check version 2 is supported or not */ 272 if ((ret & FIRMWARE_VERSION_MASK) == PM_API_VERSION_2) { 273 /* 274 * Call feature check for IOCTL/QUERY API to get IOCTL ID or 275 * QUERY ID feature status. 276 */ 277 ret = do_feature_check_call(api_id); 278 if (ret < 0) 279 return ret; 280 281 bit_mask = (api_id == PM_IOCTL) ? ioctl_features : query_features; 282 283 if ((bit_mask[(id / 32)] & BIT((id % 32))) == 0U) 284 return -EOPNOTSUPP; 285 } else { 286 return -ENODATA; 287 } 288 289 return 0; 290 } 291 EXPORT_SYMBOL_GPL(zynqmp_pm_is_function_supported); 292 293 /** 294 * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer 295 * caller function depending on the configuration 296 * @pm_api_id: Requested PM-API call 297 * @arg0: Argument 0 to requested PM-API call 298 * @arg1: Argument 1 to requested PM-API call 299 * @arg2: Argument 2 to requested PM-API call 300 * @arg3: Argument 3 to requested PM-API call 301 * @ret_payload: Returned value array 302 * 303 * Invoke platform management function for SMC or HVC call, depending on 304 * configuration. 305 * Following SMC Calling Convention (SMCCC) for SMC64: 306 * Pm Function Identifier, 307 * PM_SIP_SVC + PM_API_ID = 308 * ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT) 309 * ((SMC_64) << FUNCID_CC_SHIFT) 310 * ((SIP_START) << FUNCID_OEN_SHIFT) 311 * ((PM_API_ID) & FUNCID_NUM_MASK)) 312 * 313 * PM_SIP_SVC - Registered ZynqMP SIP Service Call. 314 * PM_API_ID - Platform Management API ID. 315 * 316 * Return: Returns status, either success or error+reason 317 */ 318 int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1, 319 u32 arg2, u32 arg3, u32 *ret_payload) 320 { 321 /* 322 * Added SIP service call Function Identifier 323 * Make sure to stay in x0 register 324 */ 325 u64 smc_arg[4]; 326 int ret; 327 328 /* Check if feature is supported or not */ 329 ret = zynqmp_pm_feature(pm_api_id); 330 if (ret < 0) 331 return ret; 332 333 smc_arg[0] = PM_SIP_SVC | pm_api_id; 334 smc_arg[1] = ((u64)arg1 << 32) | arg0; 335 smc_arg[2] = ((u64)arg3 << 32) | arg2; 336 337 return do_fw_call(smc_arg[0], smc_arg[1], smc_arg[2], ret_payload); 338 } 339 340 static u32 pm_api_version; 341 static u32 pm_tz_version; 342 343 int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset) 344 { 345 int ret; 346 347 ret = zynqmp_pm_invoke_fn(TF_A_PM_REGISTER_SGI, sgi_num, reset, 0, 0, 348 NULL); 349 if (!ret) 350 return ret; 351 352 /* try old implementation as fallback strategy if above fails */ 353 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, sgi_num, 354 reset, NULL); 355 } 356 357 /** 358 * zynqmp_pm_get_api_version() - Get version number of PMU PM firmware 359 * @version: Returned version value 360 * 361 * Return: Returns status, either success or error+reason 362 */ 363 int zynqmp_pm_get_api_version(u32 *version) 364 { 365 u32 ret_payload[PAYLOAD_ARG_CNT]; 366 int ret; 367 368 if (!version) 369 return -EINVAL; 370 371 /* Check is PM API version already verified */ 372 if (pm_api_version > 0) { 373 *version = pm_api_version; 374 return 0; 375 } 376 ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, 0, 0, 0, 0, ret_payload); 377 *version = ret_payload[1]; 378 379 return ret; 380 } 381 EXPORT_SYMBOL_GPL(zynqmp_pm_get_api_version); 382 383 /** 384 * zynqmp_pm_get_chipid - Get silicon ID registers 385 * @idcode: IDCODE register 386 * @version: version register 387 * 388 * Return: Returns the status of the operation and the idcode and version 389 * registers in @idcode and @version. 390 */ 391 int zynqmp_pm_get_chipid(u32 *idcode, u32 *version) 392 { 393 u32 ret_payload[PAYLOAD_ARG_CNT]; 394 int ret; 395 396 if (!idcode || !version) 397 return -EINVAL; 398 399 ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload); 400 *idcode = ret_payload[1]; 401 *version = ret_payload[2]; 402 403 return ret; 404 } 405 EXPORT_SYMBOL_GPL(zynqmp_pm_get_chipid); 406 407 /** 408 * zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version 409 * @version: Returned version value 410 * 411 * Return: Returns status, either success or error+reason 412 */ 413 static int zynqmp_pm_get_trustzone_version(u32 *version) 414 { 415 u32 ret_payload[PAYLOAD_ARG_CNT]; 416 int ret; 417 418 if (!version) 419 return -EINVAL; 420 421 /* Check is PM trustzone version already verified */ 422 if (pm_tz_version > 0) { 423 *version = pm_tz_version; 424 return 0; 425 } 426 ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, 0, 0, 427 0, 0, ret_payload); 428 *version = ret_payload[1]; 429 430 return ret; 431 } 432 433 /** 434 * get_set_conduit_method() - Choose SMC or HVC based communication 435 * @np: Pointer to the device_node structure 436 * 437 * Use SMC or HVC-based functions to communicate with EL2/EL3. 438 * 439 * Return: Returns 0 on success or error code 440 */ 441 static int get_set_conduit_method(struct device_node *np) 442 { 443 const char *method; 444 445 if (of_property_read_string(np, "method", &method)) { 446 pr_warn("%s missing \"method\" property\n", __func__); 447 return -ENXIO; 448 } 449 450 if (!strcmp("hvc", method)) { 451 do_fw_call = do_fw_call_hvc; 452 } else if (!strcmp("smc", method)) { 453 do_fw_call = do_fw_call_smc; 454 } else { 455 pr_warn("%s Invalid \"method\" property: %s\n", 456 __func__, method); 457 return -EINVAL; 458 } 459 460 return 0; 461 } 462 463 /** 464 * zynqmp_pm_query_data() - Get query data from firmware 465 * @qdata: Variable to the zynqmp_pm_query_data structure 466 * @out: Returned output value 467 * 468 * Return: Returns status, either success or error+reason 469 */ 470 int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out) 471 { 472 int ret; 473 474 ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1, 475 qdata.arg2, qdata.arg3, out); 476 477 /* 478 * For clock name query, all bytes in SMC response are clock name 479 * characters and return code is always success. For invalid clocks, 480 * clock name bytes would be zeros. 481 */ 482 return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret; 483 } 484 EXPORT_SYMBOL_GPL(zynqmp_pm_query_data); 485 486 /** 487 * zynqmp_pm_clock_enable() - Enable the clock for given id 488 * @clock_id: ID of the clock to be enabled 489 * 490 * This function is used by master to enable the clock 491 * including peripherals and PLL clocks. 492 * 493 * Return: Returns status, either success or error+reason 494 */ 495 int zynqmp_pm_clock_enable(u32 clock_id) 496 { 497 return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL); 498 } 499 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_enable); 500 501 /** 502 * zynqmp_pm_clock_disable() - Disable the clock for given id 503 * @clock_id: ID of the clock to be disable 504 * 505 * This function is used by master to disable the clock 506 * including peripherals and PLL clocks. 507 * 508 * Return: Returns status, either success or error+reason 509 */ 510 int zynqmp_pm_clock_disable(u32 clock_id) 511 { 512 return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL); 513 } 514 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_disable); 515 516 /** 517 * zynqmp_pm_clock_getstate() - Get the clock state for given id 518 * @clock_id: ID of the clock to be queried 519 * @state: 1/0 (Enabled/Disabled) 520 * 521 * This function is used by master to get the state of clock 522 * including peripherals and PLL clocks. 523 * 524 * Return: Returns status, either success or error+reason 525 */ 526 int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state) 527 { 528 u32 ret_payload[PAYLOAD_ARG_CNT]; 529 int ret; 530 531 ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0, 532 0, 0, ret_payload); 533 *state = ret_payload[1]; 534 535 return ret; 536 } 537 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getstate); 538 539 /** 540 * zynqmp_pm_clock_setdivider() - Set the clock divider for given id 541 * @clock_id: ID of the clock 542 * @divider: divider value 543 * 544 * This function is used by master to set divider for any clock 545 * to achieve desired rate. 546 * 547 * Return: Returns status, either success or error+reason 548 */ 549 int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider) 550 { 551 return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider, 552 0, 0, NULL); 553 } 554 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setdivider); 555 556 /** 557 * zynqmp_pm_clock_getdivider() - Get the clock divider for given id 558 * @clock_id: ID of the clock 559 * @divider: divider value 560 * 561 * This function is used by master to get divider values 562 * for any clock. 563 * 564 * Return: Returns status, either success or error+reason 565 */ 566 int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider) 567 { 568 u32 ret_payload[PAYLOAD_ARG_CNT]; 569 int ret; 570 571 ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0, 572 0, 0, ret_payload); 573 *divider = ret_payload[1]; 574 575 return ret; 576 } 577 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getdivider); 578 579 /** 580 * zynqmp_pm_clock_setrate() - Set the clock rate for given id 581 * @clock_id: ID of the clock 582 * @rate: rate value in hz 583 * 584 * This function is used by master to set rate for any clock. 585 * 586 * Return: Returns status, either success or error+reason 587 */ 588 int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate) 589 { 590 return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id, 591 lower_32_bits(rate), 592 upper_32_bits(rate), 593 0, NULL); 594 } 595 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setrate); 596 597 /** 598 * zynqmp_pm_clock_getrate() - Get the clock rate for given id 599 * @clock_id: ID of the clock 600 * @rate: rate value in hz 601 * 602 * This function is used by master to get rate 603 * for any clock. 604 * 605 * Return: Returns status, either success or error+reason 606 */ 607 int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate) 608 { 609 u32 ret_payload[PAYLOAD_ARG_CNT]; 610 int ret; 611 612 ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0, 613 0, 0, ret_payload); 614 *rate = ((u64)ret_payload[2] << 32) | ret_payload[1]; 615 616 return ret; 617 } 618 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getrate); 619 620 /** 621 * zynqmp_pm_clock_setparent() - Set the clock parent for given id 622 * @clock_id: ID of the clock 623 * @parent_id: parent id 624 * 625 * This function is used by master to set parent for any clock. 626 * 627 * Return: Returns status, either success or error+reason 628 */ 629 int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id) 630 { 631 return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id, 632 parent_id, 0, 0, NULL); 633 } 634 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setparent); 635 636 /** 637 * zynqmp_pm_clock_getparent() - Get the clock parent for given id 638 * @clock_id: ID of the clock 639 * @parent_id: parent id 640 * 641 * This function is used by master to get parent index 642 * for any clock. 643 * 644 * Return: Returns status, either success or error+reason 645 */ 646 int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id) 647 { 648 u32 ret_payload[PAYLOAD_ARG_CNT]; 649 int ret; 650 651 ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0, 652 0, 0, ret_payload); 653 *parent_id = ret_payload[1]; 654 655 return ret; 656 } 657 EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getparent); 658 659 /** 660 * zynqmp_pm_set_pll_frac_mode() - PM API for set PLL mode 661 * 662 * @clk_id: PLL clock ID 663 * @mode: PLL mode (PLL_MODE_FRAC/PLL_MODE_INT) 664 * 665 * This function sets PLL mode 666 * 667 * Return: Returns status, either success or error+reason 668 */ 669 int zynqmp_pm_set_pll_frac_mode(u32 clk_id, u32 mode) 670 { 671 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_MODE, 672 clk_id, mode, NULL); 673 } 674 EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_mode); 675 676 /** 677 * zynqmp_pm_get_pll_frac_mode() - PM API for get PLL mode 678 * 679 * @clk_id: PLL clock ID 680 * @mode: PLL mode 681 * 682 * This function return current PLL mode 683 * 684 * Return: Returns status, either success or error+reason 685 */ 686 int zynqmp_pm_get_pll_frac_mode(u32 clk_id, u32 *mode) 687 { 688 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_MODE, 689 clk_id, 0, mode); 690 } 691 EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_mode); 692 693 /** 694 * zynqmp_pm_set_pll_frac_data() - PM API for setting pll fraction data 695 * 696 * @clk_id: PLL clock ID 697 * @data: fraction data 698 * 699 * This function sets fraction data. 700 * It is valid for fraction mode only. 701 * 702 * Return: Returns status, either success or error+reason 703 */ 704 int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data) 705 { 706 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_DATA, 707 clk_id, data, NULL); 708 } 709 EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_data); 710 711 /** 712 * zynqmp_pm_get_pll_frac_data() - PM API for getting pll fraction data 713 * 714 * @clk_id: PLL clock ID 715 * @data: fraction data 716 * 717 * This function returns fraction data value. 718 * 719 * Return: Returns status, either success or error+reason 720 */ 721 int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data) 722 { 723 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_DATA, 724 clk_id, 0, data); 725 } 726 EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data); 727 728 /** 729 * zynqmp_pm_set_sd_tapdelay() - Set tap delay for the SD device 730 * 731 * @node_id: Node ID of the device 732 * @type: Type of tap delay to set (input/output) 733 * @value: Value to set fot the tap delay 734 * 735 * This function sets input/output tap delay for the SD device. 736 * 737 * Return: Returns status, either success or error+reason 738 */ 739 int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value) 740 { 741 return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SET_SD_TAPDELAY, 742 type, value, NULL); 743 } 744 EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay); 745 746 /** 747 * zynqmp_pm_sd_dll_reset() - Reset DLL logic 748 * 749 * @node_id: Node ID of the device 750 * @type: Reset type 751 * 752 * This function resets DLL logic for the SD device. 753 * 754 * Return: Returns status, either success or error+reason 755 */ 756 int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type) 757 { 758 return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SD_DLL_RESET, 759 type, 0, NULL); 760 } 761 EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset); 762 763 /** 764 * zynqmp_pm_ospi_mux_select() - OSPI Mux selection 765 * 766 * @dev_id: Device Id of the OSPI device. 767 * @select: OSPI Mux select value. 768 * 769 * This function select the OSPI Mux. 770 * 771 * Return: Returns status, either success or error+reason 772 */ 773 int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select) 774 { 775 return zynqmp_pm_invoke_fn(PM_IOCTL, dev_id, IOCTL_OSPI_MUX_SELECT, 776 select, 0, NULL); 777 } 778 EXPORT_SYMBOL_GPL(zynqmp_pm_ospi_mux_select); 779 780 /** 781 * zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs) 782 * @index: GGS register index 783 * @value: Register value to be written 784 * 785 * This function writes value to GGS register. 786 * 787 * Return: Returns status, either success or error+reason 788 */ 789 int zynqmp_pm_write_ggs(u32 index, u32 value) 790 { 791 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_GGS, 792 index, value, NULL); 793 } 794 EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs); 795 796 /** 797 * zynqmp_pm_read_ggs() - PM API for reading global general storage (ggs) 798 * @index: GGS register index 799 * @value: Register value to be written 800 * 801 * This function returns GGS register value. 802 * 803 * Return: Returns status, either success or error+reason 804 */ 805 int zynqmp_pm_read_ggs(u32 index, u32 *value) 806 { 807 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_GGS, 808 index, 0, value); 809 } 810 EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs); 811 812 /** 813 * zynqmp_pm_write_pggs() - PM API for writing persistent global general 814 * storage (pggs) 815 * @index: PGGS register index 816 * @value: Register value to be written 817 * 818 * This function writes value to PGGS register. 819 * 820 * Return: Returns status, either success or error+reason 821 */ 822 int zynqmp_pm_write_pggs(u32 index, u32 value) 823 { 824 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_PGGS, index, value, 825 NULL); 826 } 827 EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs); 828 829 /** 830 * zynqmp_pm_read_pggs() - PM API for reading persistent global general 831 * storage (pggs) 832 * @index: PGGS register index 833 * @value: Register value to be written 834 * 835 * This function returns PGGS register value. 836 * 837 * Return: Returns status, either success or error+reason 838 */ 839 int zynqmp_pm_read_pggs(u32 index, u32 *value) 840 { 841 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_PGGS, index, 0, 842 value); 843 } 844 EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs); 845 846 int zynqmp_pm_set_tapdelay_bypass(u32 index, u32 value) 847 { 848 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_TAPDELAY_BYPASS, 849 index, value, NULL); 850 } 851 EXPORT_SYMBOL_GPL(zynqmp_pm_set_tapdelay_bypass); 852 853 /** 854 * zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status 855 * @value: Status value to be written 856 * 857 * This function sets healthy bit value to indicate boot health status 858 * to firmware. 859 * 860 * Return: Returns status, either success or error+reason 861 */ 862 int zynqmp_pm_set_boot_health_status(u32 value) 863 { 864 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_BOOT_HEALTH_STATUS, 865 value, 0, NULL); 866 } 867 868 /** 869 * zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release) 870 * @reset: Reset to be configured 871 * @assert_flag: Flag stating should reset be asserted (1) or 872 * released (0) 873 * 874 * Return: Returns status, either success or error+reason 875 */ 876 int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset, 877 const enum zynqmp_pm_reset_action assert_flag) 878 { 879 return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag, 880 0, 0, NULL); 881 } 882 EXPORT_SYMBOL_GPL(zynqmp_pm_reset_assert); 883 884 /** 885 * zynqmp_pm_reset_get_status - Get status of the reset 886 * @reset: Reset whose status should be returned 887 * @status: Returned status 888 * 889 * Return: Returns status, either success or error+reason 890 */ 891 int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status) 892 { 893 u32 ret_payload[PAYLOAD_ARG_CNT]; 894 int ret; 895 896 if (!status) 897 return -EINVAL; 898 899 ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0, 900 0, 0, ret_payload); 901 *status = ret_payload[1]; 902 903 return ret; 904 } 905 EXPORT_SYMBOL_GPL(zynqmp_pm_reset_get_status); 906 907 /** 908 * zynqmp_pm_fpga_load - Perform the fpga load 909 * @address: Address to write to 910 * @size: pl bitstream size 911 * @flags: Bitstream type 912 * -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration 913 * -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration 914 * 915 * This function provides access to pmufw. To transfer 916 * the required bitstream into PL. 917 * 918 * Return: Returns status, either success or error+reason 919 */ 920 int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags) 921 { 922 return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address), 923 upper_32_bits(address), size, flags, NULL); 924 } 925 EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_load); 926 927 /** 928 * zynqmp_pm_fpga_get_status - Read value from PCAP status register 929 * @value: Value to read 930 * 931 * This function provides access to the pmufw to get the PCAP 932 * status 933 * 934 * Return: Returns status, either success or error+reason 935 */ 936 int zynqmp_pm_fpga_get_status(u32 *value) 937 { 938 u32 ret_payload[PAYLOAD_ARG_CNT]; 939 int ret; 940 941 if (!value) 942 return -EINVAL; 943 944 ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload); 945 *value = ret_payload[1]; 946 947 return ret; 948 } 949 EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status); 950 951 /** 952 * zynqmp_pm_pinctrl_request - Request Pin from firmware 953 * @pin: Pin number to request 954 * 955 * This function requests pin from firmware. 956 * 957 * Return: Returns status, either success or error+reason. 958 */ 959 int zynqmp_pm_pinctrl_request(const u32 pin) 960 { 961 return zynqmp_pm_invoke_fn(PM_PINCTRL_REQUEST, pin, 0, 0, 0, NULL); 962 } 963 EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_request); 964 965 /** 966 * zynqmp_pm_pinctrl_release - Inform firmware that Pin control is released 967 * @pin: Pin number to release 968 * 969 * This function release pin from firmware. 970 * 971 * Return: Returns status, either success or error+reason. 972 */ 973 int zynqmp_pm_pinctrl_release(const u32 pin) 974 { 975 return zynqmp_pm_invoke_fn(PM_PINCTRL_RELEASE, pin, 0, 0, 0, NULL); 976 } 977 EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_release); 978 979 /** 980 * zynqmp_pm_pinctrl_get_function - Read function id set for the given pin 981 * @pin: Pin number 982 * @id: Buffer to store function ID 983 * 984 * This function provides the function currently set for the given pin. 985 * 986 * Return: Returns status, either success or error+reason 987 */ 988 int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id) 989 { 990 u32 ret_payload[PAYLOAD_ARG_CNT]; 991 int ret; 992 993 if (!id) 994 return -EINVAL; 995 996 ret = zynqmp_pm_invoke_fn(PM_PINCTRL_GET_FUNCTION, pin, 0, 997 0, 0, ret_payload); 998 *id = ret_payload[1]; 999 1000 return ret; 1001 } 1002 EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_function); 1003 1004 /** 1005 * zynqmp_pm_pinctrl_set_function - Set requested function for the pin 1006 * @pin: Pin number 1007 * @id: Function ID to set 1008 * 1009 * This function sets requested function for the given pin. 1010 * 1011 * Return: Returns status, either success or error+reason. 1012 */ 1013 int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id) 1014 { 1015 return zynqmp_pm_invoke_fn(PM_PINCTRL_SET_FUNCTION, pin, id, 1016 0, 0, NULL); 1017 } 1018 EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_function); 1019 1020 /** 1021 * zynqmp_pm_pinctrl_get_config - Get configuration parameter for the pin 1022 * @pin: Pin number 1023 * @param: Parameter to get 1024 * @value: Buffer to store parameter value 1025 * 1026 * This function gets requested configuration parameter for the given pin. 1027 * 1028 * Return: Returns status, either success or error+reason. 1029 */ 1030 int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param, 1031 u32 *value) 1032 { 1033 u32 ret_payload[PAYLOAD_ARG_CNT]; 1034 int ret; 1035 1036 if (!value) 1037 return -EINVAL; 1038 1039 ret = zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_GET, pin, param, 1040 0, 0, ret_payload); 1041 *value = ret_payload[1]; 1042 1043 return ret; 1044 } 1045 EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_config); 1046 1047 /** 1048 * zynqmp_pm_pinctrl_set_config - Set configuration parameter for the pin 1049 * @pin: Pin number 1050 * @param: Parameter to set 1051 * @value: Parameter value to set 1052 * 1053 * This function sets requested configuration parameter for the given pin. 1054 * 1055 * Return: Returns status, either success or error+reason. 1056 */ 1057 int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param, 1058 u32 value) 1059 { 1060 return zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_SET, pin, 1061 param, value, 0, NULL); 1062 } 1063 EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config); 1064 1065 /** 1066 * zynqmp_pm_bootmode_read() - PM Config API for read bootpin status 1067 * @ps_mode: Returned output value of ps_mode 1068 * 1069 * This API function is to be used for notify the power management controller 1070 * to read bootpin status. 1071 * 1072 * Return: status, either success or error+reason 1073 */ 1074 unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode) 1075 { 1076 unsigned int ret; 1077 u32 ret_payload[PAYLOAD_ARG_CNT]; 1078 1079 ret = zynqmp_pm_invoke_fn(PM_MMIO_READ, CRL_APB_BOOT_PIN_CTRL, 0, 1080 0, 0, ret_payload); 1081 1082 *ps_mode = ret_payload[1]; 1083 1084 return ret; 1085 } 1086 EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_read); 1087 1088 /** 1089 * zynqmp_pm_bootmode_write() - PM Config API for Configure bootpin 1090 * @ps_mode: Value to be written to the bootpin ctrl register 1091 * 1092 * This API function is to be used for notify the power management controller 1093 * to configure bootpin. 1094 * 1095 * Return: Returns status, either success or error+reason 1096 */ 1097 int zynqmp_pm_bootmode_write(u32 ps_mode) 1098 { 1099 return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, CRL_APB_BOOT_PIN_CTRL, 1100 CRL_APB_BOOTPIN_CTRL_MASK, ps_mode, 0, NULL); 1101 } 1102 EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_write); 1103 1104 /** 1105 * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller 1106 * master has initialized its own power management 1107 * 1108 * Return: Returns status, either success or error+reason 1109 * 1110 * This API function is to be used for notify the power management controller 1111 * about the completed power management initialization. 1112 */ 1113 int zynqmp_pm_init_finalize(void) 1114 { 1115 return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL); 1116 } 1117 EXPORT_SYMBOL_GPL(zynqmp_pm_init_finalize); 1118 1119 /** 1120 * zynqmp_pm_set_suspend_mode() - Set system suspend mode 1121 * @mode: Mode to set for system suspend 1122 * 1123 * This API function is used to set mode of system suspend. 1124 * 1125 * Return: Returns status, either success or error+reason 1126 */ 1127 int zynqmp_pm_set_suspend_mode(u32 mode) 1128 { 1129 return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL); 1130 } 1131 EXPORT_SYMBOL_GPL(zynqmp_pm_set_suspend_mode); 1132 1133 /** 1134 * zynqmp_pm_request_node() - Request a node with specific capabilities 1135 * @node: Node ID of the slave 1136 * @capabilities: Requested capabilities of the slave 1137 * @qos: Quality of service (not supported) 1138 * @ack: Flag to specify whether acknowledge is requested 1139 * 1140 * This function is used by master to request particular node from firmware. 1141 * Every master must request node before using it. 1142 * 1143 * Return: Returns status, either success or error+reason 1144 */ 1145 int zynqmp_pm_request_node(const u32 node, const u32 capabilities, 1146 const u32 qos, const enum zynqmp_pm_request_ack ack) 1147 { 1148 return zynqmp_pm_invoke_fn(PM_REQUEST_NODE, node, capabilities, 1149 qos, ack, NULL); 1150 } 1151 EXPORT_SYMBOL_GPL(zynqmp_pm_request_node); 1152 1153 /** 1154 * zynqmp_pm_release_node() - Release a node 1155 * @node: Node ID of the slave 1156 * 1157 * This function is used by master to inform firmware that master 1158 * has released node. Once released, master must not use that node 1159 * without re-request. 1160 * 1161 * Return: Returns status, either success or error+reason 1162 */ 1163 int zynqmp_pm_release_node(const u32 node) 1164 { 1165 return zynqmp_pm_invoke_fn(PM_RELEASE_NODE, node, 0, 0, 0, NULL); 1166 } 1167 EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); 1168 1169 /** 1170 * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves 1171 * @node: Node ID of the slave 1172 * @capabilities: Requested capabilities of the slave 1173 * @qos: Quality of service (not supported) 1174 * @ack: Flag to specify whether acknowledge is requested 1175 * 1176 * This API function is to be used for slaves a PU already has requested 1177 * to change its capabilities. 1178 * 1179 * Return: Returns status, either success or error+reason 1180 */ 1181 int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities, 1182 const u32 qos, 1183 const enum zynqmp_pm_request_ack ack) 1184 { 1185 return zynqmp_pm_invoke_fn(PM_SET_REQUIREMENT, node, capabilities, 1186 qos, ack, NULL); 1187 } 1188 EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement); 1189 1190 /** 1191 * zynqmp_pm_load_pdi - Load and process PDI 1192 * @src: Source device where PDI is located 1193 * @address: PDI src address 1194 * 1195 * This function provides support to load PDI from linux 1196 * 1197 * Return: Returns status, either success or error+reason 1198 */ 1199 int zynqmp_pm_load_pdi(const u32 src, const u64 address) 1200 { 1201 return zynqmp_pm_invoke_fn(PM_LOAD_PDI, src, 1202 lower_32_bits(address), 1203 upper_32_bits(address), 0, NULL); 1204 } 1205 EXPORT_SYMBOL_GPL(zynqmp_pm_load_pdi); 1206 1207 /** 1208 * zynqmp_pm_aes_engine - Access AES hardware to encrypt/decrypt the data using 1209 * AES-GCM core. 1210 * @address: Address of the AesParams structure. 1211 * @out: Returned output value 1212 * 1213 * Return: Returns status, either success or error code. 1214 */ 1215 int zynqmp_pm_aes_engine(const u64 address, u32 *out) 1216 { 1217 u32 ret_payload[PAYLOAD_ARG_CNT]; 1218 int ret; 1219 1220 if (!out) 1221 return -EINVAL; 1222 1223 ret = zynqmp_pm_invoke_fn(PM_SECURE_AES, upper_32_bits(address), 1224 lower_32_bits(address), 1225 0, 0, ret_payload); 1226 *out = ret_payload[1]; 1227 1228 return ret; 1229 } 1230 EXPORT_SYMBOL_GPL(zynqmp_pm_aes_engine); 1231 1232 /** 1233 * zynqmp_pm_sha_hash - Access the SHA engine to calculate the hash 1234 * @address: Address of the data/ Address of output buffer where 1235 * hash should be stored. 1236 * @size: Size of the data. 1237 * @flags: 1238 * BIT(0) - for initializing csudma driver and SHA3(Here address 1239 * and size inputs can be NULL). 1240 * BIT(1) - to call Sha3_Update API which can be called multiple 1241 * times when data is not contiguous. 1242 * BIT(2) - to get final hash of the whole updated data. 1243 * Hash will be overwritten at provided address with 1244 * 48 bytes. 1245 * 1246 * Return: Returns status, either success or error code. 1247 */ 1248 int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags) 1249 { 1250 u32 lower_addr = lower_32_bits(address); 1251 u32 upper_addr = upper_32_bits(address); 1252 1253 return zynqmp_pm_invoke_fn(PM_SECURE_SHA, upper_addr, lower_addr, 1254 size, flags, NULL); 1255 } 1256 EXPORT_SYMBOL_GPL(zynqmp_pm_sha_hash); 1257 1258 /** 1259 * zynqmp_pm_register_notifier() - PM API for register a subsystem 1260 * to be notified about specific 1261 * event/error. 1262 * @node: Node ID to which the event is related. 1263 * @event: Event Mask of Error events for which wants to get notified. 1264 * @wake: Wake subsystem upon capturing the event if value 1 1265 * @enable: Enable the registration for value 1, disable for value 0 1266 * 1267 * This function is used to register/un-register for particular node-event 1268 * combination in firmware. 1269 * 1270 * Return: Returns status, either success or error+reason 1271 */ 1272 1273 int zynqmp_pm_register_notifier(const u32 node, const u32 event, 1274 const u32 wake, const u32 enable) 1275 { 1276 return zynqmp_pm_invoke_fn(PM_REGISTER_NOTIFIER, node, event, 1277 wake, enable, NULL); 1278 } 1279 EXPORT_SYMBOL_GPL(zynqmp_pm_register_notifier); 1280 1281 /** 1282 * zynqmp_pm_system_shutdown - PM call to request a system shutdown or restart 1283 * @type: Shutdown or restart? 0 for shutdown, 1 for restart 1284 * @subtype: Specifies which system should be restarted or shut down 1285 * 1286 * Return: Returns status, either success or error+reason 1287 */ 1288 int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype) 1289 { 1290 return zynqmp_pm_invoke_fn(PM_SYSTEM_SHUTDOWN, type, subtype, 1291 0, 0, NULL); 1292 } 1293 1294 /** 1295 * zynqmp_pm_set_feature_config - PM call to request IOCTL for feature config 1296 * @id: The config ID of the feature to be configured 1297 * @value: The config value of the feature to be configured 1298 * 1299 * Return: Returns 0 on success or error value on failure. 1300 */ 1301 int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value) 1302 { 1303 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_FEATURE_CONFIG, 1304 id, value, NULL); 1305 } 1306 1307 /** 1308 * zynqmp_pm_get_feature_config - PM call to get value of configured feature 1309 * @id: The config id of the feature to be queried 1310 * @payload: Returned value array 1311 * 1312 * Return: Returns 0 on success or error value on failure. 1313 */ 1314 int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, 1315 u32 *payload) 1316 { 1317 return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_FEATURE_CONFIG, 1318 id, 0, payload); 1319 } 1320 1321 /** 1322 * zynqmp_pm_set_sd_config - PM call to set value of SD config registers 1323 * @node: SD node ID 1324 * @config: The config type of SD registers 1325 * @value: Value to be set 1326 * 1327 * Return: Returns 0 on success or error value on failure. 1328 */ 1329 int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value) 1330 { 1331 return zynqmp_pm_invoke_fn(PM_IOCTL, node, IOCTL_SET_SD_CONFIG, 1332 config, value, NULL); 1333 } 1334 EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_config); 1335 1336 /** 1337 * zynqmp_pm_set_gem_config - PM call to set value of GEM config registers 1338 * @node: GEM node ID 1339 * @config: The config type of GEM registers 1340 * @value: Value to be set 1341 * 1342 * Return: Returns 0 on success or error value on failure. 1343 */ 1344 int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config, 1345 u32 value) 1346 { 1347 return zynqmp_pm_invoke_fn(PM_IOCTL, node, IOCTL_SET_GEM_CONFIG, 1348 config, value, NULL); 1349 } 1350 EXPORT_SYMBOL_GPL(zynqmp_pm_set_gem_config); 1351 1352 /** 1353 * struct zynqmp_pm_shutdown_scope - Struct for shutdown scope 1354 * @subtype: Shutdown subtype 1355 * @name: Matching string for scope argument 1356 * 1357 * This struct encapsulates mapping between shutdown scope ID and string. 1358 */ 1359 struct zynqmp_pm_shutdown_scope { 1360 const enum zynqmp_pm_shutdown_subtype subtype; 1361 const char *name; 1362 }; 1363 1364 static struct zynqmp_pm_shutdown_scope shutdown_scopes[] = { 1365 [ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM] = { 1366 .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM, 1367 .name = "subsystem", 1368 }, 1369 [ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY] = { 1370 .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY, 1371 .name = "ps_only", 1372 }, 1373 [ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM] = { 1374 .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM, 1375 .name = "system", 1376 }, 1377 }; 1378 1379 static struct zynqmp_pm_shutdown_scope *selected_scope = 1380 &shutdown_scopes[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM]; 1381 1382 /** 1383 * zynqmp_pm_is_shutdown_scope_valid - Check if shutdown scope string is valid 1384 * @scope_string: Shutdown scope string 1385 * 1386 * Return: Return pointer to matching shutdown scope struct from 1387 * array of available options in system if string is valid, 1388 * otherwise returns NULL. 1389 */ 1390 static struct zynqmp_pm_shutdown_scope* 1391 zynqmp_pm_is_shutdown_scope_valid(const char *scope_string) 1392 { 1393 int count; 1394 1395 for (count = 0; count < ARRAY_SIZE(shutdown_scopes); count++) 1396 if (sysfs_streq(scope_string, shutdown_scopes[count].name)) 1397 return &shutdown_scopes[count]; 1398 1399 return NULL; 1400 } 1401 1402 static ssize_t shutdown_scope_show(struct device *device, 1403 struct device_attribute *attr, 1404 char *buf) 1405 { 1406 int i; 1407 1408 for (i = 0; i < ARRAY_SIZE(shutdown_scopes); i++) { 1409 if (&shutdown_scopes[i] == selected_scope) { 1410 strcat(buf, "["); 1411 strcat(buf, shutdown_scopes[i].name); 1412 strcat(buf, "]"); 1413 } else { 1414 strcat(buf, shutdown_scopes[i].name); 1415 } 1416 strcat(buf, " "); 1417 } 1418 strcat(buf, "\n"); 1419 1420 return strlen(buf); 1421 } 1422 1423 static ssize_t shutdown_scope_store(struct device *device, 1424 struct device_attribute *attr, 1425 const char *buf, size_t count) 1426 { 1427 int ret; 1428 struct zynqmp_pm_shutdown_scope *scope; 1429 1430 scope = zynqmp_pm_is_shutdown_scope_valid(buf); 1431 if (!scope) 1432 return -EINVAL; 1433 1434 ret = zynqmp_pm_system_shutdown(ZYNQMP_PM_SHUTDOWN_TYPE_SETSCOPE_ONLY, 1435 scope->subtype); 1436 if (ret) { 1437 pr_err("unable to set shutdown scope %s\n", buf); 1438 return ret; 1439 } 1440 1441 selected_scope = scope; 1442 1443 return count; 1444 } 1445 1446 static DEVICE_ATTR_RW(shutdown_scope); 1447 1448 static ssize_t health_status_store(struct device *device, 1449 struct device_attribute *attr, 1450 const char *buf, size_t count) 1451 { 1452 int ret; 1453 unsigned int value; 1454 1455 ret = kstrtouint(buf, 10, &value); 1456 if (ret) 1457 return ret; 1458 1459 ret = zynqmp_pm_set_boot_health_status(value); 1460 if (ret) { 1461 dev_err(device, "unable to set healthy bit value to %u\n", 1462 value); 1463 return ret; 1464 } 1465 1466 return count; 1467 } 1468 1469 static DEVICE_ATTR_WO(health_status); 1470 1471 static ssize_t ggs_show(struct device *device, 1472 struct device_attribute *attr, 1473 char *buf, 1474 u32 reg) 1475 { 1476 int ret; 1477 u32 ret_payload[PAYLOAD_ARG_CNT]; 1478 1479 ret = zynqmp_pm_read_ggs(reg, ret_payload); 1480 if (ret) 1481 return ret; 1482 1483 return sprintf(buf, "0x%x\n", ret_payload[1]); 1484 } 1485 1486 static ssize_t ggs_store(struct device *device, 1487 struct device_attribute *attr, 1488 const char *buf, size_t count, 1489 u32 reg) 1490 { 1491 long value; 1492 int ret; 1493 1494 if (reg >= GSS_NUM_REGS) 1495 return -EINVAL; 1496 1497 ret = kstrtol(buf, 16, &value); 1498 if (ret) { 1499 count = -EFAULT; 1500 goto err; 1501 } 1502 1503 ret = zynqmp_pm_write_ggs(reg, value); 1504 if (ret) 1505 count = -EFAULT; 1506 err: 1507 return count; 1508 } 1509 1510 /* GGS register show functions */ 1511 #define GGS0_SHOW(N) \ 1512 ssize_t ggs##N##_show(struct device *device, \ 1513 struct device_attribute *attr, \ 1514 char *buf) \ 1515 { \ 1516 return ggs_show(device, attr, buf, N); \ 1517 } 1518 1519 static GGS0_SHOW(0); 1520 static GGS0_SHOW(1); 1521 static GGS0_SHOW(2); 1522 static GGS0_SHOW(3); 1523 1524 /* GGS register store function */ 1525 #define GGS0_STORE(N) \ 1526 ssize_t ggs##N##_store(struct device *device, \ 1527 struct device_attribute *attr, \ 1528 const char *buf, \ 1529 size_t count) \ 1530 { \ 1531 return ggs_store(device, attr, buf, count, N); \ 1532 } 1533 1534 static GGS0_STORE(0); 1535 static GGS0_STORE(1); 1536 static GGS0_STORE(2); 1537 static GGS0_STORE(3); 1538 1539 static ssize_t pggs_show(struct device *device, 1540 struct device_attribute *attr, 1541 char *buf, 1542 u32 reg) 1543 { 1544 int ret; 1545 u32 ret_payload[PAYLOAD_ARG_CNT]; 1546 1547 ret = zynqmp_pm_read_pggs(reg, ret_payload); 1548 if (ret) 1549 return ret; 1550 1551 return sprintf(buf, "0x%x\n", ret_payload[1]); 1552 } 1553 1554 static ssize_t pggs_store(struct device *device, 1555 struct device_attribute *attr, 1556 const char *buf, size_t count, 1557 u32 reg) 1558 { 1559 long value; 1560 int ret; 1561 1562 if (reg >= GSS_NUM_REGS) 1563 return -EINVAL; 1564 1565 ret = kstrtol(buf, 16, &value); 1566 if (ret) { 1567 count = -EFAULT; 1568 goto err; 1569 } 1570 1571 ret = zynqmp_pm_write_pggs(reg, value); 1572 if (ret) 1573 count = -EFAULT; 1574 1575 err: 1576 return count; 1577 } 1578 1579 #define PGGS0_SHOW(N) \ 1580 ssize_t pggs##N##_show(struct device *device, \ 1581 struct device_attribute *attr, \ 1582 char *buf) \ 1583 { \ 1584 return pggs_show(device, attr, buf, N); \ 1585 } 1586 1587 #define PGGS0_STORE(N) \ 1588 ssize_t pggs##N##_store(struct device *device, \ 1589 struct device_attribute *attr, \ 1590 const char *buf, \ 1591 size_t count) \ 1592 { \ 1593 return pggs_store(device, attr, buf, count, N); \ 1594 } 1595 1596 /* PGGS register show functions */ 1597 static PGGS0_SHOW(0); 1598 static PGGS0_SHOW(1); 1599 static PGGS0_SHOW(2); 1600 static PGGS0_SHOW(3); 1601 1602 /* PGGS register store functions */ 1603 static PGGS0_STORE(0); 1604 static PGGS0_STORE(1); 1605 static PGGS0_STORE(2); 1606 static PGGS0_STORE(3); 1607 1608 /* GGS register attributes */ 1609 static DEVICE_ATTR_RW(ggs0); 1610 static DEVICE_ATTR_RW(ggs1); 1611 static DEVICE_ATTR_RW(ggs2); 1612 static DEVICE_ATTR_RW(ggs3); 1613 1614 /* PGGS register attributes */ 1615 static DEVICE_ATTR_RW(pggs0); 1616 static DEVICE_ATTR_RW(pggs1); 1617 static DEVICE_ATTR_RW(pggs2); 1618 static DEVICE_ATTR_RW(pggs3); 1619 1620 static ssize_t feature_config_id_show(struct device *device, 1621 struct device_attribute *attr, 1622 char *buf) 1623 { 1624 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1625 1626 return sysfs_emit(buf, "%d\n", devinfo->feature_conf_id); 1627 } 1628 1629 static ssize_t feature_config_id_store(struct device *device, 1630 struct device_attribute *attr, 1631 const char *buf, size_t count) 1632 { 1633 u32 config_id; 1634 int ret; 1635 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1636 1637 if (!buf) 1638 return -EINVAL; 1639 1640 ret = kstrtou32(buf, 10, &config_id); 1641 if (ret) 1642 return ret; 1643 1644 devinfo->feature_conf_id = config_id; 1645 1646 return count; 1647 } 1648 1649 static DEVICE_ATTR_RW(feature_config_id); 1650 1651 static ssize_t feature_config_value_show(struct device *device, 1652 struct device_attribute *attr, 1653 char *buf) 1654 { 1655 int ret; 1656 u32 ret_payload[PAYLOAD_ARG_CNT]; 1657 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1658 1659 ret = zynqmp_pm_get_feature_config(devinfo->feature_conf_id, 1660 ret_payload); 1661 if (ret) 1662 return ret; 1663 1664 return sysfs_emit(buf, "%d\n", ret_payload[1]); 1665 } 1666 1667 static ssize_t feature_config_value_store(struct device *device, 1668 struct device_attribute *attr, 1669 const char *buf, size_t count) 1670 { 1671 u32 value; 1672 int ret; 1673 struct zynqmp_devinfo *devinfo = dev_get_drvdata(device); 1674 1675 if (!buf) 1676 return -EINVAL; 1677 1678 ret = kstrtou32(buf, 10, &value); 1679 if (ret) 1680 return ret; 1681 1682 ret = zynqmp_pm_set_feature_config(devinfo->feature_conf_id, 1683 value); 1684 if (ret) 1685 return ret; 1686 1687 return count; 1688 } 1689 1690 static DEVICE_ATTR_RW(feature_config_value); 1691 1692 static struct attribute *zynqmp_firmware_attrs[] = { 1693 &dev_attr_ggs0.attr, 1694 &dev_attr_ggs1.attr, 1695 &dev_attr_ggs2.attr, 1696 &dev_attr_ggs3.attr, 1697 &dev_attr_pggs0.attr, 1698 &dev_attr_pggs1.attr, 1699 &dev_attr_pggs2.attr, 1700 &dev_attr_pggs3.attr, 1701 &dev_attr_shutdown_scope.attr, 1702 &dev_attr_health_status.attr, 1703 &dev_attr_feature_config_id.attr, 1704 &dev_attr_feature_config_value.attr, 1705 NULL, 1706 }; 1707 1708 ATTRIBUTE_GROUPS(zynqmp_firmware); 1709 1710 static int zynqmp_firmware_probe(struct platform_device *pdev) 1711 { 1712 struct device *dev = &pdev->dev; 1713 struct device_node *np; 1714 struct zynqmp_devinfo *devinfo; 1715 int ret; 1716 1717 ret = get_set_conduit_method(dev->of_node); 1718 if (ret) 1719 return ret; 1720 1721 np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp"); 1722 if (!np) { 1723 np = of_find_compatible_node(NULL, NULL, "xlnx,versal"); 1724 if (!np) 1725 return 0; 1726 1727 feature_check_enabled = true; 1728 } 1729 1730 if (!feature_check_enabled) { 1731 ret = do_feature_check_call(PM_FEATURE_CHECK); 1732 if (ret >= 0) 1733 feature_check_enabled = true; 1734 } 1735 1736 of_node_put(np); 1737 1738 devinfo = devm_kzalloc(dev, sizeof(*devinfo), GFP_KERNEL); 1739 if (!devinfo) 1740 return -ENOMEM; 1741 1742 devinfo->dev = dev; 1743 1744 platform_set_drvdata(pdev, devinfo); 1745 1746 /* Check PM API version number */ 1747 ret = zynqmp_pm_get_api_version(&pm_api_version); 1748 if (ret) 1749 return ret; 1750 1751 if (pm_api_version < ZYNQMP_PM_VERSION) { 1752 panic("%s Platform Management API version error. Expected: v%d.%d - Found: v%d.%d\n", 1753 __func__, 1754 ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR, 1755 pm_api_version >> 16, pm_api_version & 0xFFFF); 1756 } 1757 1758 pr_info("%s Platform Management API v%d.%d\n", __func__, 1759 pm_api_version >> 16, pm_api_version & 0xFFFF); 1760 1761 /* Check trustzone version number */ 1762 ret = zynqmp_pm_get_trustzone_version(&pm_tz_version); 1763 if (ret) 1764 panic("Legacy trustzone found without version support\n"); 1765 1766 if (pm_tz_version < ZYNQMP_TZ_VERSION) 1767 panic("%s Trustzone version error. Expected: v%d.%d - Found: v%d.%d\n", 1768 __func__, 1769 ZYNQMP_TZ_VERSION_MAJOR, ZYNQMP_TZ_VERSION_MINOR, 1770 pm_tz_version >> 16, pm_tz_version & 0xFFFF); 1771 1772 pr_info("%s Trustzone version v%d.%d\n", __func__, 1773 pm_tz_version >> 16, pm_tz_version & 0xFFFF); 1774 1775 ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs, 1776 ARRAY_SIZE(firmware_devs), NULL, 0, NULL); 1777 if (ret) { 1778 dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret); 1779 return ret; 1780 } 1781 1782 zynqmp_pm_api_debugfs_init(); 1783 1784 np = of_find_compatible_node(NULL, NULL, "xlnx,versal"); 1785 if (np) { 1786 em_dev = platform_device_register_data(&pdev->dev, "xlnx_event_manager", 1787 -1, NULL, 0); 1788 if (IS_ERR(em_dev)) 1789 dev_err_probe(&pdev->dev, PTR_ERR(em_dev), "EM register fail with error\n"); 1790 } 1791 of_node_put(np); 1792 1793 return of_platform_populate(dev->of_node, NULL, NULL, dev); 1794 } 1795 1796 static int zynqmp_firmware_remove(struct platform_device *pdev) 1797 { 1798 struct pm_api_feature_data *feature_data; 1799 struct hlist_node *tmp; 1800 int i; 1801 1802 mfd_remove_devices(&pdev->dev); 1803 zynqmp_pm_api_debugfs_exit(); 1804 1805 hash_for_each_safe(pm_api_features_map, i, tmp, feature_data, hentry) { 1806 hash_del(&feature_data->hentry); 1807 kfree(feature_data); 1808 } 1809 1810 platform_device_unregister(em_dev); 1811 1812 return 0; 1813 } 1814 1815 static const struct of_device_id zynqmp_firmware_of_match[] = { 1816 {.compatible = "xlnx,zynqmp-firmware"}, 1817 {.compatible = "xlnx,versal-firmware"}, 1818 {}, 1819 }; 1820 MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match); 1821 1822 static struct platform_driver zynqmp_firmware_driver = { 1823 .driver = { 1824 .name = "zynqmp_firmware", 1825 .of_match_table = zynqmp_firmware_of_match, 1826 .dev_groups = zynqmp_firmware_groups, 1827 }, 1828 .probe = zynqmp_firmware_probe, 1829 .remove = zynqmp_firmware_remove, 1830 }; 1831 module_platform_driver(zynqmp_firmware_driver); 1832