1 /* SPDX-License-Identifier: BSD-3-Clause */ 2 /* 3 * Texas Instruments System Control Interface (TISCI) Protocol 4 * 5 * Communication protocol with TI SCI hardware 6 * The system works in a message response protocol 7 * See: http://processors.wiki.ti.com/index.php/TISCI for details 8 * 9 * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ 10 */ 11 12 #ifndef __TI_SCI_H 13 #define __TI_SCI_H 14 15 /* Generic Messages */ 16 #define TI_SCI_MSG_ENABLE_WDT 0x0000 17 #define TI_SCI_MSG_WAKE_RESET 0x0001 18 #define TI_SCI_MSG_VERSION 0x0002 19 #define TI_SCI_MSG_WAKE_REASON 0x0003 20 #define TI_SCI_MSG_GOODBYE 0x0004 21 #define TI_SCI_MSG_SYS_RESET 0x0005 22 23 /* Device requests */ 24 #define TI_SCI_MSG_SET_DEVICE_STATE 0x0200 25 #define TI_SCI_MSG_GET_DEVICE_STATE 0x0201 26 #define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202 27 28 /* Clock requests */ 29 #define TI_SCI_MSG_SET_CLOCK_STATE 0x0100 30 #define TI_SCI_MSG_GET_CLOCK_STATE 0x0101 31 #define TI_SCI_MSG_SET_CLOCK_PARENT 0x0102 32 #define TI_SCI_MSG_GET_CLOCK_PARENT 0x0103 33 #define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104 34 #define TI_SCI_MSG_SET_CLOCK_FREQ 0x010c 35 #define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d 36 #define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e 37 38 /* Resource Management Requests */ 39 #define TI_SCI_MSG_GET_RESOURCE_RANGE 0x1500 40 41 /* IRQ requests */ 42 #define TI_SCI_MSG_SET_IRQ 0x1000 43 #define TI_SCI_MSG_FREE_IRQ 0x1001 44 45 /* NAVSS resource management */ 46 /* Ringacc requests */ 47 #define TI_SCI_MSG_RM_RING_ALLOCATE 0x1100 48 #define TI_SCI_MSG_RM_RING_FREE 0x1101 49 #define TI_SCI_MSG_RM_RING_RECONFIG 0x1102 50 #define TI_SCI_MSG_RM_RING_RESET 0x1103 51 #define TI_SCI_MSG_RM_RING_CFG 0x1110 52 #define TI_SCI_MSG_RM_RING_GET_CFG 0x1111 53 54 /* PSI-L requests */ 55 #define TI_SCI_MSG_RM_PSIL_PAIR 0x1280 56 #define TI_SCI_MSG_RM_PSIL_UNPAIR 0x1281 57 58 #define TI_SCI_MSG_RM_UDMAP_TX_ALLOC 0x1200 59 #define TI_SCI_MSG_RM_UDMAP_TX_FREE 0x1201 60 #define TI_SCI_MSG_RM_UDMAP_RX_ALLOC 0x1210 61 #define TI_SCI_MSG_RM_UDMAP_RX_FREE 0x1211 62 #define TI_SCI_MSG_RM_UDMAP_FLOW_CFG 0x1220 63 #define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG 0x1221 64 65 #define TISCI_MSG_RM_UDMAP_TX_CH_CFG 0x1205 66 #define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG 0x1206 67 #define TISCI_MSG_RM_UDMAP_RX_CH_CFG 0x1215 68 #define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG 0x1216 69 #define TISCI_MSG_RM_UDMAP_FLOW_CFG 0x1230 70 #define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG 0x1231 71 #define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG 0x1232 72 #define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG 0x1233 73 74 /* Processor Control requests */ 75 #define TI_SCI_MSG_PROC_REQUEST 0xc000 76 #define TI_SCI_MSG_PROC_RELEASE 0xc001 77 #define TI_SCI_MSG_PROC_HANDOVER 0xc005 78 #define TI_SCI_MSG_SET_CONFIG 0xc100 79 #define TI_SCI_MSG_SET_CTRL 0xc101 80 #define TI_SCI_MSG_GET_STATUS 0xc400 81 82 /** 83 * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses 84 * @type: Type of messages: One of TI_SCI_MSG* values 85 * @host: Host of the message 86 * @seq: Message identifier indicating a transfer sequence 87 * @flags: Flag for the message 88 */ 89 struct ti_sci_msg_hdr { 90 u16 type; 91 u8 host; 92 u8 seq; 93 #define TI_SCI_MSG_FLAG(val) (1 << (val)) 94 #define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE 0x0 95 #define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED TI_SCI_MSG_FLAG(0) 96 #define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED TI_SCI_MSG_FLAG(1) 97 #define TI_SCI_FLAG_RESP_GENERIC_NACK 0x0 98 #define TI_SCI_FLAG_RESP_GENERIC_ACK TI_SCI_MSG_FLAG(1) 99 /* Additional Flags */ 100 u32 flags; 101 } __packed; 102 103 /** 104 * struct ti_sci_msg_resp_version - Response for a message 105 * @hdr: Generic header 106 * @firmware_description: String describing the firmware 107 * @firmware_revision: Firmware revision 108 * @abi_major: Major version of the ABI that firmware supports 109 * @abi_minor: Minor version of the ABI that firmware supports 110 * 111 * In general, ABI version changes follow the rule that minor version increments 112 * are backward compatible. Major revision changes in ABI may not be 113 * backward compatible. 114 * 115 * Response to a generic message with message type TI_SCI_MSG_VERSION 116 */ 117 struct ti_sci_msg_resp_version { 118 struct ti_sci_msg_hdr hdr; 119 char firmware_description[32]; 120 u16 firmware_revision; 121 u8 abi_major; 122 u8 abi_minor; 123 } __packed; 124 125 /** 126 * struct ti_sci_msg_req_reboot - Reboot the SoC 127 * @hdr: Generic Header 128 * 129 * Request type is TI_SCI_MSG_SYS_RESET, responded with a generic 130 * ACK/NACK message. 131 */ 132 struct ti_sci_msg_req_reboot { 133 struct ti_sci_msg_hdr hdr; 134 } __packed; 135 136 /** 137 * struct ti_sci_msg_req_set_device_state - Set the desired state of the device 138 * @hdr: Generic header 139 * @id: Indicates which device to modify 140 * @reserved: Reserved space in message, must be 0 for backward compatibility 141 * @state: The desired state of the device. 142 * 143 * Certain flags can also be set to alter the device state: 144 * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source. 145 * The meaning of this flag will vary slightly from device to device and from 146 * SoC to SoC but it generally allows the device to wake the SoC out of deep 147 * suspend states. 148 * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device. 149 * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed 150 * with STATE_RETENTION or STATE_ON, it will claim the device exclusively. 151 * If another host already has this device set to STATE_RETENTION or STATE_ON, 152 * the message will fail. Once successful, other hosts attempting to set 153 * STATE_RETENTION or STATE_ON will fail. 154 * 155 * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic 156 * ACK/NACK message. 157 */ 158 struct ti_sci_msg_req_set_device_state { 159 /* Additional hdr->flags options */ 160 #define MSG_FLAG_DEVICE_WAKE_ENABLED TI_SCI_MSG_FLAG(8) 161 #define MSG_FLAG_DEVICE_RESET_ISO TI_SCI_MSG_FLAG(9) 162 #define MSG_FLAG_DEVICE_EXCLUSIVE TI_SCI_MSG_FLAG(10) 163 struct ti_sci_msg_hdr hdr; 164 u32 id; 165 u32 reserved; 166 167 #define MSG_DEVICE_SW_STATE_AUTO_OFF 0 168 #define MSG_DEVICE_SW_STATE_RETENTION 1 169 #define MSG_DEVICE_SW_STATE_ON 2 170 u8 state; 171 } __packed; 172 173 /** 174 * struct ti_sci_msg_req_get_device_state - Request to get device. 175 * @hdr: Generic header 176 * @id: Device Identifier 177 * 178 * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state 179 * information 180 */ 181 struct ti_sci_msg_req_get_device_state { 182 struct ti_sci_msg_hdr hdr; 183 u32 id; 184 } __packed; 185 186 /** 187 * struct ti_sci_msg_resp_get_device_state - Response to get device request. 188 * @hdr: Generic header 189 * @context_loss_count: Indicates how many times the device has lost context. A 190 * driver can use this monotonic counter to determine if the device has 191 * lost context since the last time this message was exchanged. 192 * @resets: Programmed state of the reset lines. 193 * @programmed_state: The state as programmed by set_device. 194 * - Uses the MSG_DEVICE_SW_* macros 195 * @current_state: The actual state of the hardware. 196 * 197 * Response to request TI_SCI_MSG_GET_DEVICE_STATE. 198 */ 199 struct ti_sci_msg_resp_get_device_state { 200 struct ti_sci_msg_hdr hdr; 201 u32 context_loss_count; 202 u32 resets; 203 u8 programmed_state; 204 #define MSG_DEVICE_HW_STATE_OFF 0 205 #define MSG_DEVICE_HW_STATE_ON 1 206 #define MSG_DEVICE_HW_STATE_TRANS 2 207 u8 current_state; 208 } __packed; 209 210 /** 211 * struct ti_sci_msg_req_set_device_resets - Set the desired resets 212 * configuration of the device 213 * @hdr: Generic header 214 * @id: Indicates which device to modify 215 * @resets: A bit field of resets for the device. The meaning, behavior, 216 * and usage of the reset flags are device specific. 0 for a bit 217 * indicates releasing the reset represented by that bit while 1 218 * indicates keeping it held. 219 * 220 * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic 221 * ACK/NACK message. 222 */ 223 struct ti_sci_msg_req_set_device_resets { 224 struct ti_sci_msg_hdr hdr; 225 u32 id; 226 u32 resets; 227 } __packed; 228 229 /** 230 * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state 231 * @hdr: Generic Header, Certain flags can be set specific to the clocks: 232 * MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified 233 * via spread spectrum clocking. 234 * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's 235 * frequency to be changed while it is running so long as it 236 * is within the min/max limits. 237 * MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this 238 * is only applicable to clock inputs on the SoC pseudo-device. 239 * @dev_id: Device identifier this request is for 240 * @clk_id: Clock identifier for the device for this request. 241 * Each device has it's own set of clock inputs. This indexes 242 * which clock input to modify. Set to 255 if clock ID is 243 * greater than or equal to 255. 244 * @request_state: Request the state for the clock to be set to. 245 * MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock, 246 * it can be disabled, regardless of the state of the device 247 * MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to 248 * automatically manage the state of this clock. If the device 249 * is enabled, then the clock is enabled. If the device is set 250 * to off or retention, then the clock is internally set as not 251 * being required by the device.(default) 252 * MSG_CLOCK_SW_STATE_REQ: Configure the clock to be enabled, 253 * regardless of the state of the device. 254 * @clk_id_32: Clock identifier for the device for this request. 255 * Only to be used if the clock ID is greater than or equal to 256 * 255. 257 * 258 * Normally, all required clocks are managed by TISCI entity, this is used 259 * only for specific control *IF* required. Auto managed state is 260 * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote 261 * will explicitly control. 262 * 263 * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic 264 * ACK or NACK message. 265 */ 266 struct ti_sci_msg_req_set_clock_state { 267 /* Additional hdr->flags options */ 268 #define MSG_FLAG_CLOCK_ALLOW_SSC TI_SCI_MSG_FLAG(8) 269 #define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE TI_SCI_MSG_FLAG(9) 270 #define MSG_FLAG_CLOCK_INPUT_TERM TI_SCI_MSG_FLAG(10) 271 struct ti_sci_msg_hdr hdr; 272 u32 dev_id; 273 u8 clk_id; 274 #define MSG_CLOCK_SW_STATE_UNREQ 0 275 #define MSG_CLOCK_SW_STATE_AUTO 1 276 #define MSG_CLOCK_SW_STATE_REQ 2 277 u8 request_state; 278 u32 clk_id_32; 279 } __packed; 280 281 /** 282 * struct ti_sci_msg_req_get_clock_state - Request for clock state 283 * @hdr: Generic Header 284 * @dev_id: Device identifier this request is for 285 * @clk_id: Clock identifier for the device for this request. 286 * Each device has it's own set of clock inputs. This indexes 287 * which clock input to get state of. Set to 255 if the clock 288 * ID is greater than or equal to 255. 289 * @clk_id_32: Clock identifier for the device for the request. 290 * Only to be used if the clock ID is greater than or equal to 291 * 255. 292 * 293 * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state 294 * of the clock 295 */ 296 struct ti_sci_msg_req_get_clock_state { 297 struct ti_sci_msg_hdr hdr; 298 u32 dev_id; 299 u8 clk_id; 300 u32 clk_id_32; 301 } __packed; 302 303 /** 304 * struct ti_sci_msg_resp_get_clock_state - Response to get clock state 305 * @hdr: Generic Header 306 * @programmed_state: Any programmed state of the clock. This is one of 307 * MSG_CLOCK_SW_STATE* values. 308 * @current_state: Current state of the clock. This is one of: 309 * MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready 310 * MSG_CLOCK_HW_STATE_READY: Clock is ready 311 * 312 * Response to TI_SCI_MSG_GET_CLOCK_STATE. 313 */ 314 struct ti_sci_msg_resp_get_clock_state { 315 struct ti_sci_msg_hdr hdr; 316 u8 programmed_state; 317 #define MSG_CLOCK_HW_STATE_NOT_READY 0 318 #define MSG_CLOCK_HW_STATE_READY 1 319 u8 current_state; 320 } __packed; 321 322 /** 323 * struct ti_sci_msg_req_set_clock_parent - Set the clock parent 324 * @hdr: Generic Header 325 * @dev_id: Device identifier this request is for 326 * @clk_id: Clock identifier for the device for this request. 327 * Each device has it's own set of clock inputs. This indexes 328 * which clock input to modify. Set to 255 if clock ID is 329 * greater than or equal to 255. 330 * @parent_id: The new clock parent is selectable by an index via this 331 * parameter. Set to 255 if clock ID is greater than or 332 * equal to 255. 333 * @clk_id_32: Clock identifier if @clk_id field is 255. 334 * @parent_id_32: Parent identifier if @parent_id is 255. 335 * 336 * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic 337 * ACK / NACK message. 338 */ 339 struct ti_sci_msg_req_set_clock_parent { 340 struct ti_sci_msg_hdr hdr; 341 u32 dev_id; 342 u8 clk_id; 343 u8 parent_id; 344 u32 clk_id_32; 345 u32 parent_id_32; 346 } __packed; 347 348 /** 349 * struct ti_sci_msg_req_get_clock_parent - Get the clock parent 350 * @hdr: Generic Header 351 * @dev_id: Device identifier this request is for 352 * @clk_id: Clock identifier for the device for this request. 353 * Each device has it's own set of clock inputs. This indexes 354 * which clock input to get the parent for. If this field 355 * contains 255, the actual clock identifier is stored in 356 * @clk_id_32. 357 * @clk_id_32: Clock identifier if the @clk_id field contains 255. 358 * 359 * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information 360 */ 361 struct ti_sci_msg_req_get_clock_parent { 362 struct ti_sci_msg_hdr hdr; 363 u32 dev_id; 364 u8 clk_id; 365 u32 clk_id_32; 366 } __packed; 367 368 /** 369 * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent 370 * @hdr: Generic Header 371 * @parent_id: The current clock parent. If set to 255, the current parent 372 * ID can be found from the @parent_id_32 field. 373 * @parent_id_32: Current clock parent if @parent_id field is set to 374 * 255. 375 * 376 * Response to TI_SCI_MSG_GET_CLOCK_PARENT. 377 */ 378 struct ti_sci_msg_resp_get_clock_parent { 379 struct ti_sci_msg_hdr hdr; 380 u8 parent_id; 381 u32 parent_id_32; 382 } __packed; 383 384 /** 385 * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents 386 * @hdr: Generic header 387 * @dev_id: Device identifier this request is for 388 * @clk_id: Clock identifier for the device for this request. Set to 389 * 255 if clock ID is greater than or equal to 255. 390 * @clk_id_32: Clock identifier if the @clk_id field contains 255. 391 * 392 * This request provides information about how many clock parent options 393 * are available for a given clock to a device. This is typically used 394 * for input clocks. 395 * 396 * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate 397 * message, or NACK in case of inability to satisfy request. 398 */ 399 struct ti_sci_msg_req_get_clock_num_parents { 400 struct ti_sci_msg_hdr hdr; 401 u32 dev_id; 402 u8 clk_id; 403 u32 clk_id_32; 404 } __packed; 405 406 /** 407 * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents 408 * @hdr: Generic header 409 * @num_parents: Number of clock parents. If set to 255, the actual 410 * number of parents is stored into @num_parents_32 411 * field instead. 412 * @num_parents_32: Number of clock parents if @num_parents field is 413 * set to 255. 414 * 415 * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 416 */ 417 struct ti_sci_msg_resp_get_clock_num_parents { 418 struct ti_sci_msg_hdr hdr; 419 u8 num_parents; 420 u32 num_parents_32; 421 } __packed; 422 423 /** 424 * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency 425 * @hdr: Generic Header 426 * @dev_id: Device identifier this request is for 427 * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum 428 * allowable programmed frequency and does not account for clock 429 * tolerances and jitter. 430 * @target_freq_hz: The target clock frequency. A frequency will be found 431 * as close to this target frequency as possible. 432 * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum 433 * allowable programmed frequency and does not account for clock 434 * tolerances and jitter. 435 * @clk_id: Clock identifier for the device for this request. Set to 436 * 255 if clock identifier is greater than or equal to 255. 437 * @clk_id_32: Clock identifier if @clk_id is set to 255. 438 * 439 * NOTE: Normally clock frequency management is automatically done by TISCI 440 * entity. In case of specific requests, TISCI evaluates capability to achieve 441 * requested frequency within provided range and responds with 442 * result message. 443 * 444 * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message, 445 * or NACK in case of inability to satisfy request. 446 */ 447 struct ti_sci_msg_req_query_clock_freq { 448 struct ti_sci_msg_hdr hdr; 449 u32 dev_id; 450 u64 min_freq_hz; 451 u64 target_freq_hz; 452 u64 max_freq_hz; 453 u8 clk_id; 454 u32 clk_id_32; 455 } __packed; 456 457 /** 458 * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query 459 * @hdr: Generic Header 460 * @freq_hz: Frequency that is the best match in Hz. 461 * 462 * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request 463 * cannot be satisfied, the message will be of type NACK. 464 */ 465 struct ti_sci_msg_resp_query_clock_freq { 466 struct ti_sci_msg_hdr hdr; 467 u64 freq_hz; 468 } __packed; 469 470 /** 471 * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency 472 * @hdr: Generic Header 473 * @dev_id: Device identifier this request is for 474 * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum 475 * allowable programmed frequency and does not account for clock 476 * tolerances and jitter. 477 * @target_freq_hz: The target clock frequency. The clock will be programmed 478 * at a rate as close to this target frequency as possible. 479 * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum 480 * allowable programmed frequency and does not account for clock 481 * tolerances and jitter. 482 * @clk_id: Clock identifier for the device for this request. Set to 483 * 255 if clock ID is greater than or equal to 255. 484 * @clk_id_32: Clock identifier if @clk_id field is set to 255. 485 * 486 * NOTE: Normally clock frequency management is automatically done by TISCI 487 * entity. In case of specific requests, TISCI evaluates capability to achieve 488 * requested range and responds with success/failure message. 489 * 490 * This sets the desired frequency for a clock within an allowable 491 * range. This message will fail on an enabled clock unless 492 * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally, 493 * if other clocks have their frequency modified due to this message, 494 * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled. 495 * 496 * Calling set frequency on a clock input to the SoC pseudo-device will 497 * inform the PMMC of that clock's frequency. Setting a frequency of 498 * zero will indicate the clock is disabled. 499 * 500 * Calling set frequency on clock outputs from the SoC pseudo-device will 501 * function similarly to setting the clock frequency on a device. 502 * 503 * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK 504 * message. 505 */ 506 struct ti_sci_msg_req_set_clock_freq { 507 struct ti_sci_msg_hdr hdr; 508 u32 dev_id; 509 u64 min_freq_hz; 510 u64 target_freq_hz; 511 u64 max_freq_hz; 512 u8 clk_id; 513 u32 clk_id_32; 514 } __packed; 515 516 /** 517 * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency 518 * @hdr: Generic Header 519 * @dev_id: Device identifier this request is for 520 * @clk_id: Clock identifier for the device for this request. Set to 521 * 255 if clock ID is greater than or equal to 255. 522 * @clk_id_32: Clock identifier if @clk_id field is set to 255. 523 * 524 * NOTE: Normally clock frequency management is automatically done by TISCI 525 * entity. In some cases, clock frequencies are configured by host. 526 * 527 * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency 528 * that the clock is currently at. 529 */ 530 struct ti_sci_msg_req_get_clock_freq { 531 struct ti_sci_msg_hdr hdr; 532 u32 dev_id; 533 u8 clk_id; 534 u32 clk_id_32; 535 } __packed; 536 537 /** 538 * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request 539 * @hdr: Generic Header 540 * @freq_hz: Frequency that the clock is currently on, in Hz. 541 * 542 * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ. 543 */ 544 struct ti_sci_msg_resp_get_clock_freq { 545 struct ti_sci_msg_hdr hdr; 546 u64 freq_hz; 547 } __packed; 548 549 #define TI_SCI_IRQ_SECONDARY_HOST_INVALID 0xff 550 551 /** 552 * struct ti_sci_msg_req_get_resource_range - Request to get a host's assigned 553 * range of resources. 554 * @hdr: Generic Header 555 * @type: Unique resource assignment type 556 * @subtype: Resource assignment subtype within the resource type. 557 * @secondary_host: Host processing entity to which the resources are 558 * allocated. This is required only when the destination 559 * host id id different from ti sci interface host id, 560 * else TI_SCI_IRQ_SECONDARY_HOST_INVALID can be passed. 561 * 562 * Request type is TI_SCI_MSG_GET_RESOURCE_RANGE. Responded with requested 563 * resource range which is of type TI_SCI_MSG_GET_RESOURCE_RANGE. 564 */ 565 struct ti_sci_msg_req_get_resource_range { 566 struct ti_sci_msg_hdr hdr; 567 #define MSG_RM_RESOURCE_TYPE_MASK GENMASK(9, 0) 568 #define MSG_RM_RESOURCE_SUBTYPE_MASK GENMASK(5, 0) 569 u16 type; 570 u8 subtype; 571 u8 secondary_host; 572 } __packed; 573 574 /** 575 * struct ti_sci_msg_resp_get_resource_range - Response to resource get range. 576 * @hdr: Generic Header 577 * @range_start: Start index of the resource range. 578 * @range_num: Number of resources in the range. 579 * 580 * Response to request TI_SCI_MSG_GET_RESOURCE_RANGE. 581 */ 582 struct ti_sci_msg_resp_get_resource_range { 583 struct ti_sci_msg_hdr hdr; 584 u16 range_start; 585 u16 range_num; 586 } __packed; 587 588 /** 589 * struct ti_sci_msg_req_manage_irq - Request to configure/release the route 590 * between the dev and the host. 591 * @hdr: Generic Header 592 * @valid_params: Bit fields defining the validity of interrupt source 593 * parameters. If a bit is not set, then corresponding 594 * field is not valid and will not be used for route set. 595 * Bit field definitions: 596 * 0 - Valid bit for @dst_id 597 * 1 - Valid bit for @dst_host_irq 598 * 2 - Valid bit for @ia_id 599 * 3 - Valid bit for @vint 600 * 4 - Valid bit for @global_event 601 * 5 - Valid bit for @vint_status_bit_index 602 * 31 - Valid bit for @secondary_host 603 * @src_id: IRQ source peripheral ID. 604 * @src_index: IRQ source index within the peripheral 605 * @dst_id: IRQ Destination ID. Based on the architecture it can be 606 * IRQ controller or host processor ID. 607 * @dst_host_irq: IRQ number of the destination host IRQ controller 608 * @ia_id: Device ID of the interrupt aggregator in which the 609 * vint resides. 610 * @vint: Virtual interrupt number if the interrupt route 611 * is through an interrupt aggregator. 612 * @global_event: Global event that is to be mapped to interrupt 613 * aggregator virtual interrupt status bit. 614 * @vint_status_bit: Virtual interrupt status bit if the interrupt route 615 * utilizes an interrupt aggregator status bit. 616 * @secondary_host: Host ID of the IRQ destination computing entity. This is 617 * required only when destination host id is different 618 * from ti sci interface host id. 619 * 620 * Request type is TI_SCI_MSG_SET/RELEASE_IRQ. 621 * Response is generic ACK / NACK message. 622 */ 623 struct ti_sci_msg_req_manage_irq { 624 struct ti_sci_msg_hdr hdr; 625 #define MSG_FLAG_DST_ID_VALID TI_SCI_MSG_FLAG(0) 626 #define MSG_FLAG_DST_HOST_IRQ_VALID TI_SCI_MSG_FLAG(1) 627 #define MSG_FLAG_IA_ID_VALID TI_SCI_MSG_FLAG(2) 628 #define MSG_FLAG_VINT_VALID TI_SCI_MSG_FLAG(3) 629 #define MSG_FLAG_GLB_EVNT_VALID TI_SCI_MSG_FLAG(4) 630 #define MSG_FLAG_VINT_STS_BIT_VALID TI_SCI_MSG_FLAG(5) 631 #define MSG_FLAG_SHOST_VALID TI_SCI_MSG_FLAG(31) 632 u32 valid_params; 633 u16 src_id; 634 u16 src_index; 635 u16 dst_id; 636 u16 dst_host_irq; 637 u16 ia_id; 638 u16 vint; 639 u16 global_event; 640 u8 vint_status_bit; 641 u8 secondary_host; 642 } __packed; 643 644 /** 645 * struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring 646 * 647 * Configures the non-real-time registers of a Navigator Subsystem ring. 648 * @hdr: Generic Header 649 * @valid_params: Bitfield defining validity of ring configuration parameters. 650 * The ring configuration fields are not valid, and will not be used for 651 * ring configuration, if their corresponding valid bit is zero. 652 * Valid bit usage: 653 * 0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo 654 * 1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi 655 * 2 - Valid bit for @tisci_msg_rm_ring_cfg_req count 656 * 3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode 657 * 4 - Valid bit for @tisci_msg_rm_ring_cfg_req size 658 * 5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id 659 * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated 660 * @index: ring index to be configured. 661 * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's 662 * RING_BA_LO register 663 * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's 664 * RING_BA_HI register. 665 * @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM 666 * modes. 667 * @mode: Specifies the mode the ring is to be configured. 668 * @size: Specifies encoded ring element size. To calculate the encoded size use 669 * the formula (log2(size_bytes) - 2), where size_bytes cannot be 670 * greater than 256. 671 * @order_id: Specifies the ring's bus order ID. 672 */ 673 struct ti_sci_msg_rm_ring_cfg_req { 674 struct ti_sci_msg_hdr hdr; 675 u32 valid_params; 676 u16 nav_id; 677 u16 index; 678 u32 addr_lo; 679 u32 addr_hi; 680 u32 count; 681 u8 mode; 682 u8 size; 683 u8 order_id; 684 } __packed; 685 686 /** 687 * struct ti_sci_msg_rm_ring_get_cfg_req - Get RA ring's configuration 688 * 689 * Gets the configuration of the non-real-time register fields of a ring. The 690 * host, or a supervisor of the host, who owns the ring must be the requesting 691 * host. The values of the non-real-time registers are returned in 692 * @ti_sci_msg_rm_ring_get_cfg_resp. 693 * 694 * @hdr: Generic Header 695 * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated 696 * @index: ring index. 697 */ 698 struct ti_sci_msg_rm_ring_get_cfg_req { 699 struct ti_sci_msg_hdr hdr; 700 u16 nav_id; 701 u16 index; 702 } __packed; 703 704 /** 705 * struct ti_sci_msg_rm_ring_get_cfg_resp - Ring get configuration response 706 * 707 * Response received by host processor after RM has handled 708 * @ti_sci_msg_rm_ring_get_cfg_req. The response contains the ring's 709 * non-real-time register values. 710 * 711 * @hdr: Generic Header 712 * @addr_lo: Ring 32 LSBs of base address 713 * @addr_hi: Ring 16 MSBs of base address. 714 * @count: Ring number of elements. 715 * @mode: Ring mode. 716 * @size: encoded Ring element size 717 * @order_id: ing order ID. 718 */ 719 struct ti_sci_msg_rm_ring_get_cfg_resp { 720 struct ti_sci_msg_hdr hdr; 721 u32 addr_lo; 722 u32 addr_hi; 723 u32 count; 724 u8 mode; 725 u8 size; 726 u8 order_id; 727 } __packed; 728 729 /** 730 * struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination 731 * thread 732 * @hdr: Generic Header 733 * @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is 734 * used to pair the source and destination threads. 735 * @src_thread: PSI-L source thread ID within the PSI-L System thread map. 736 * 737 * UDMAP transmit channels mapped to source threads will have their 738 * TCHAN_THRD_ID register programmed with the destination thread if the pairing 739 * is successful. 740 741 * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map. 742 * PSI-L destination threads start at index 0x8000. The request is NACK'd if 743 * the destination thread is not greater than or equal to 0x8000. 744 * 745 * UDMAP receive channels mapped to destination threads will have their 746 * RCHAN_THRD_ID register programmed with the source thread if the pairing 747 * is successful. 748 * 749 * Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK 750 * message. 751 */ 752 struct ti_sci_msg_psil_pair { 753 struct ti_sci_msg_hdr hdr; 754 u32 nav_id; 755 u32 src_thread; 756 u32 dst_thread; 757 } __packed; 758 759 /** 760 * struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a 761 * destination thread 762 * @hdr: Generic Header 763 * @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is 764 * used to unpair the source and destination threads. 765 * @src_thread: PSI-L source thread ID within the PSI-L System thread map. 766 * 767 * UDMAP transmit channels mapped to source threads will have their 768 * TCHAN_THRD_ID register cleared if the unpairing is successful. 769 * 770 * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map. 771 * PSI-L destination threads start at index 0x8000. The request is NACK'd if 772 * the destination thread is not greater than or equal to 0x8000. 773 * 774 * UDMAP receive channels mapped to destination threads will have their 775 * RCHAN_THRD_ID register cleared if the unpairing is successful. 776 * 777 * Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK 778 * message. 779 */ 780 struct ti_sci_msg_psil_unpair { 781 struct ti_sci_msg_hdr hdr; 782 u32 nav_id; 783 u32 src_thread; 784 u32 dst_thread; 785 } __packed; 786 787 /** 788 * struct ti_sci_msg_udmap_rx_flow_cfg - UDMAP receive flow configuration 789 * message 790 * @hdr: Generic Header 791 * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is 792 * allocated 793 * @flow_index: UDMAP receive flow index for non-optional configuration. 794 * @rx_ch_index: Specifies the index of the receive channel using the flow_index 795 * @rx_einfo_present: UDMAP receive flow extended packet info present. 796 * @rx_psinfo_present: UDMAP receive flow PS words present. 797 * @rx_error_handling: UDMAP receive flow error handling configuration. Valid 798 * values are TI_SCI_RM_UDMAP_RX_FLOW_ERR_DROP/RETRY. 799 * @rx_desc_type: UDMAP receive flow descriptor type. It can be one of 800 * TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST/MONO. 801 * @rx_sop_offset: UDMAP receive flow start of packet offset. 802 * @rx_dest_qnum: UDMAP receive flow destination queue number. 803 * @rx_ps_location: UDMAP receive flow PS words location. 804 * 0 - end of packet descriptor 805 * 1 - Beginning of the data buffer 806 * @rx_src_tag_hi: UDMAP receive flow source tag high byte constant 807 * @rx_src_tag_lo: UDMAP receive flow source tag low byte constant 808 * @rx_dest_tag_hi: UDMAP receive flow destination tag high byte constant 809 * @rx_dest_tag_lo: UDMAP receive flow destination tag low byte constant 810 * @rx_src_tag_hi_sel: UDMAP receive flow source tag high byte selector 811 * @rx_src_tag_lo_sel: UDMAP receive flow source tag low byte selector 812 * @rx_dest_tag_hi_sel: UDMAP receive flow destination tag high byte selector 813 * @rx_dest_tag_lo_sel: UDMAP receive flow destination tag low byte selector 814 * @rx_size_thresh_en: UDMAP receive flow packet size based free buffer queue 815 * enable. If enabled, the ti_sci_rm_udmap_rx_flow_opt_cfg also need to be 816 * configured and sent. 817 * @rx_fdq0_sz0_qnum: UDMAP receive flow free descriptor queue 0. 818 * @rx_fdq1_qnum: UDMAP receive flow free descriptor queue 1. 819 * @rx_fdq2_qnum: UDMAP receive flow free descriptor queue 2. 820 * @rx_fdq3_qnum: UDMAP receive flow free descriptor queue 3. 821 * 822 * For detailed information on the settings, see the UDMAP section of the TRM. 823 */ 824 struct ti_sci_msg_udmap_rx_flow_cfg { 825 struct ti_sci_msg_hdr hdr; 826 u32 nav_id; 827 u32 flow_index; 828 u32 rx_ch_index; 829 u8 rx_einfo_present; 830 u8 rx_psinfo_present; 831 u8 rx_error_handling; 832 u8 rx_desc_type; 833 u16 rx_sop_offset; 834 u16 rx_dest_qnum; 835 u8 rx_ps_location; 836 u8 rx_src_tag_hi; 837 u8 rx_src_tag_lo; 838 u8 rx_dest_tag_hi; 839 u8 rx_dest_tag_lo; 840 u8 rx_src_tag_hi_sel; 841 u8 rx_src_tag_lo_sel; 842 u8 rx_dest_tag_hi_sel; 843 u8 rx_dest_tag_lo_sel; 844 u8 rx_size_thresh_en; 845 u16 rx_fdq0_sz0_qnum; 846 u16 rx_fdq1_qnum; 847 u16 rx_fdq2_qnum; 848 u16 rx_fdq3_qnum; 849 } __packed; 850 851 /** 852 * struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg - parameters for UDMAP receive 853 * flow optional configuration 854 * @hdr: Generic Header 855 * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is 856 * allocated 857 * @flow_index: UDMAP receive flow index for optional configuration. 858 * @rx_ch_index: Specifies the index of the receive channel using the flow_index 859 * @rx_size_thresh0: UDMAP receive flow packet size threshold 0. 860 * @rx_size_thresh1: UDMAP receive flow packet size threshold 1. 861 * @rx_size_thresh2: UDMAP receive flow packet size threshold 2. 862 * @rx_fdq0_sz1_qnum: UDMAP receive flow free descriptor queue for size 863 * threshold 1. 864 * @rx_fdq0_sz2_qnum: UDMAP receive flow free descriptor queue for size 865 * threshold 2. 866 * @rx_fdq0_sz3_qnum: UDMAP receive flow free descriptor queue for size 867 * threshold 3. 868 * 869 * For detailed information on the settings, see the UDMAP section of the TRM. 870 */ 871 struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg { 872 struct ti_sci_msg_hdr hdr; 873 u32 nav_id; 874 u32 flow_index; 875 u32 rx_ch_index; 876 u16 rx_size_thresh0; 877 u16 rx_size_thresh1; 878 u16 rx_size_thresh2; 879 u16 rx_fdq0_sz1_qnum; 880 u16 rx_fdq0_sz2_qnum; 881 u16 rx_fdq0_sz3_qnum; 882 } __packed; 883 884 /** 885 * Configures a Navigator Subsystem UDMAP transmit channel 886 * 887 * Configures the non-real-time registers of a Navigator Subsystem UDMAP 888 * transmit channel. The channel index must be assigned to the host defined 889 * in the TISCI header via the RM board configuration resource assignment 890 * range list. 891 * 892 * @hdr: Generic Header 893 * 894 * @valid_params: Bitfield defining validity of tx channel configuration 895 * parameters. The tx channel configuration fields are not valid, and will not 896 * be used for ch configuration, if their corresponding valid bit is zero. 897 * Valid bit usage: 898 * 0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err 899 * 1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype 900 * 2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type 901 * 3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size 902 * 4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum 903 * 5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority 904 * 6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos 905 * 7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid 906 * 8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority 907 * 9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo 908 * 10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords 909 * 11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt 910 * 12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count 911 * 13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth 912 * 14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size 913 * 914 * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located 915 * 916 * @index: UDMAP transmit channel index. 917 * 918 * @tx_pause_on_err: UDMAP transmit channel pause on error configuration to 919 * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG 920 * register. 921 * 922 * @tx_filt_einfo: UDMAP transmit channel extended packet information passing 923 * configuration to be programmed into the tx_filt_einfo field of the 924 * channel's TCHAN_TCFG register. 925 * 926 * @tx_filt_pswords: UDMAP transmit channel protocol specific word passing 927 * configuration to be programmed into the tx_filt_pswords field of the 928 * channel's TCHAN_TCFG register. 929 * 930 * @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer 931 * interpretation configuration to be programmed into the tx_atype field of 932 * the channel's TCHAN_TCFG register. 933 * 934 * @tx_chan_type: UDMAP transmit channel functional channel type and work 935 * passing mechanism configuration to be programmed into the tx_chan_type 936 * field of the channel's TCHAN_TCFG register. 937 * 938 * @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression 939 * configuration to be programmed into the tx_supr_tdpkt field of the channel's 940 * TCHAN_TCFG register. 941 * 942 * @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to 943 * fetch configuration to be programmed into the tx_fetch_size field of the 944 * channel's TCHAN_TCFG register. The user must make sure to set the maximum 945 * word count that can pass through the channel for any allowed descriptor type. 946 * 947 * @tx_credit_count: UDMAP transmit channel transfer request credit count 948 * configuration to be programmed into the count field of the TCHAN_TCREDIT 949 * register. Specifies how many credits for complete TRs are available. 950 * 951 * @txcq_qnum: UDMAP transmit channel completion queue configuration to be 952 * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified 953 * completion queue must be assigned to the host, or a subordinate of the host, 954 * requesting configuration of the transmit channel. 955 * 956 * @tx_priority: UDMAP transmit channel transmit priority value to be programmed 957 * into the priority field of the channel's TCHAN_TPRI_CTRL register. 958 * 959 * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the 960 * qos field of the channel's TCHAN_TPRI_CTRL register. 961 * 962 * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into 963 * the orderid field of the channel's TCHAN_TPRI_CTRL register. 964 * 965 * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed 966 * into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of 967 * Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP 968 * section of the TRM for restrictions regarding this parameter. 969 * 970 * @tx_sched_priority: UDMAP transmit channel tx scheduling priority 971 * configuration to be programmed into the priority field of the channel's 972 * TCHAN_TST_SCHED register. 973 * 974 * @tx_burst_size: UDMAP transmit channel burst size configuration to be 975 * programmed into the tx_burst_size field of the TCHAN_TCFG register. 976 */ 977 struct ti_sci_msg_rm_udmap_tx_ch_cfg_req { 978 struct ti_sci_msg_hdr hdr; 979 u32 valid_params; 980 u16 nav_id; 981 u16 index; 982 u8 tx_pause_on_err; 983 u8 tx_filt_einfo; 984 u8 tx_filt_pswords; 985 u8 tx_atype; 986 u8 tx_chan_type; 987 u8 tx_supr_tdpkt; 988 u16 tx_fetch_size; 989 u8 tx_credit_count; 990 u16 txcq_qnum; 991 u8 tx_priority; 992 u8 tx_qos; 993 u8 tx_orderid; 994 u16 fdepth; 995 u8 tx_sched_priority; 996 u8 tx_burst_size; 997 } __packed; 998 999 /** 1000 * Configures a Navigator Subsystem UDMAP receive channel 1001 * 1002 * Configures the non-real-time registers of a Navigator Subsystem UDMAP 1003 * receive channel. The channel index must be assigned to the host defined 1004 * in the TISCI header via the RM board configuration resource assignment 1005 * range list. 1006 * 1007 * @hdr: Generic Header 1008 * 1009 * @valid_params: Bitfield defining validity of rx channel configuration 1010 * parameters. 1011 * The rx channel configuration fields are not valid, and will not be used for 1012 * ch configuration, if their corresponding valid bit is zero. 1013 * Valid bit usage: 1014 * 0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err 1015 * 1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype 1016 * 2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type 1017 * 3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size 1018 * 4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum 1019 * 5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority 1020 * 6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos 1021 * 7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid 1022 * 8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority 1023 * 9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start 1024 * 10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt 1025 * 11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short 1026 * 12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long 1027 * 14 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_burst_size 1028 * 1029 * @nav_id: SoC device ID of Navigator Subsystem where rx channel is located 1030 * 1031 * @index: UDMAP receive channel index. 1032 * 1033 * @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to 1034 * fetch configuration to be programmed into the rx_fetch_size field of the 1035 * channel's RCHAN_RCFG register. 1036 * 1037 * @rxcq_qnum: UDMAP receive channel completion queue configuration to be 1038 * programmed into the rxcq_qnum field of the RCHAN_RCQ register. 1039 * The specified completion queue must be assigned to the host, or a subordinate 1040 * of the host, requesting configuration of the receive channel. 1041 * 1042 * @rx_priority: UDMAP receive channel receive priority value to be programmed 1043 * into the priority field of the channel's RCHAN_RPRI_CTRL register. 1044 * 1045 * @rx_qos: UDMAP receive channel receive qos value to be programmed into the 1046 * qos field of the channel's RCHAN_RPRI_CTRL register. 1047 * 1048 * @rx_orderid: UDMAP receive channel bus order id value to be programmed into 1049 * the orderid field of the channel's RCHAN_RPRI_CTRL register. 1050 * 1051 * @rx_sched_priority: UDMAP receive channel rx scheduling priority 1052 * configuration to be programmed into the priority field of the channel's 1053 * RCHAN_RST_SCHED register. 1054 * 1055 * @flowid_start: UDMAP receive channel additional flows starting index 1056 * configuration to program into the flow_start field of the RCHAN_RFLOW_RNG 1057 * register. Specifies the starting index for flow IDs the receive channel is to 1058 * make use of beyond the default flow. flowid_start and @ref flowid_cnt must be 1059 * set as valid and configured together. The starting flow ID set by 1060 * @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset 1061 * of flows beyond the default flows statically mapped to receive channels. 1062 * The additional flows must be assigned to the host, or a subordinate of the 1063 * host, requesting configuration of the receive channel. 1064 * 1065 * @flowid_cnt: UDMAP receive channel additional flows count configuration to 1066 * program into the flowid_cnt field of the RCHAN_RFLOW_RNG register. 1067 * This field specifies how many flow IDs are in the additional contiguous range 1068 * of legal flow IDs for the channel. @ref flowid_start and flowid_cnt must be 1069 * set as valid and configured together. Disabling the valid_params field bit 1070 * for flowid_cnt indicates no flow IDs other than the default are to be 1071 * allocated and used by the receive channel. @ref flowid_start plus flowid_cnt 1072 * cannot be greater than the number of receive flows in the receive channel's 1073 * Navigator Subsystem. The additional flows must be assigned to the host, or a 1074 * subordinate of the host, requesting configuration of the receive channel. 1075 * 1076 * @rx_pause_on_err: UDMAP receive channel pause on error configuration to be 1077 * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG 1078 * register. 1079 * 1080 * @rx_atype: UDMAP receive channel non Ring Accelerator access pointer 1081 * interpretation configuration to be programmed into the rx_atype field of the 1082 * channel's RCHAN_RCFG register. 1083 * 1084 * @rx_chan_type: UDMAP receive channel functional channel type and work passing 1085 * mechanism configuration to be programmed into the rx_chan_type field of the 1086 * channel's RCHAN_RCFG register. 1087 * 1088 * @rx_ignore_short: UDMAP receive channel short packet treatment configuration 1089 * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register. 1090 * 1091 * @rx_ignore_long: UDMAP receive channel long packet treatment configuration to 1092 * be programmed into the rx_ignore_long field of the RCHAN_RCFG register. 1093 * 1094 * @rx_burst_size: UDMAP receive channel burst size configuration to be 1095 * programmed into the rx_burst_size field of the RCHAN_RCFG register. 1096 */ 1097 struct ti_sci_msg_rm_udmap_rx_ch_cfg_req { 1098 struct ti_sci_msg_hdr hdr; 1099 u32 valid_params; 1100 u16 nav_id; 1101 u16 index; 1102 u16 rx_fetch_size; 1103 u16 rxcq_qnum; 1104 u8 rx_priority; 1105 u8 rx_qos; 1106 u8 rx_orderid; 1107 u8 rx_sched_priority; 1108 u16 flowid_start; 1109 u16 flowid_cnt; 1110 u8 rx_pause_on_err; 1111 u8 rx_atype; 1112 u8 rx_chan_type; 1113 u8 rx_ignore_short; 1114 u8 rx_ignore_long; 1115 u8 rx_burst_size; 1116 } __packed; 1117 1118 /** 1119 * Configures a Navigator Subsystem UDMAP receive flow 1120 * 1121 * Configures a Navigator Subsystem UDMAP receive flow's registers. 1122 * Configuration does not include the flow registers which handle size-based 1123 * free descriptor queue routing. 1124 * 1125 * The flow index must be assigned to the host defined in the TISCI header via 1126 * the RM board configuration resource assignment range list. 1127 * 1128 * @hdr: Standard TISCI header 1129 * 1130 * @valid_params 1131 * Bitfield defining validity of rx flow configuration parameters. The 1132 * rx flow configuration fields are not valid, and will not be used for flow 1133 * configuration, if their corresponding valid bit is zero. Valid bit usage: 1134 * 0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present 1135 * 1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present 1136 * 2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling 1137 * 3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type 1138 * 4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset 1139 * 5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum 1140 * 6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi 1141 * 7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo 1142 * 8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi 1143 * 9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo 1144 * 10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel 1145 * 11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel 1146 * 12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel 1147 * 13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel 1148 * 14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum 1149 * 15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum 1150 * 16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum 1151 * 17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum 1152 * 18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location 1153 * 1154 * @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is 1155 * allocated 1156 * 1157 * @flow_index: UDMAP receive flow index for non-optional configuration. 1158 * 1159 * @rx_einfo_present: 1160 * UDMAP receive flow extended packet info present configuration to be 1161 * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register. 1162 * 1163 * @rx_psinfo_present: 1164 * UDMAP receive flow PS words present configuration to be programmed into the 1165 * rx_psinfo_present field of the flow's RFLOW_RFA register. 1166 * 1167 * @rx_error_handling: 1168 * UDMAP receive flow error handling configuration to be programmed into the 1169 * rx_error_handling field of the flow's RFLOW_RFA register. 1170 * 1171 * @rx_desc_type: 1172 * UDMAP receive flow descriptor type configuration to be programmed into the 1173 * rx_desc_type field field of the flow's RFLOW_RFA register. 1174 * 1175 * @rx_sop_offset: 1176 * UDMAP receive flow start of packet offset configuration to be programmed 1177 * into the rx_sop_offset field of the RFLOW_RFA register. See the UDMAP 1178 * section of the TRM for more information on this setting. Valid values for 1179 * this field are 0-255 bytes. 1180 * 1181 * @rx_dest_qnum: 1182 * UDMAP receive flow destination queue configuration to be programmed into the 1183 * rx_dest_qnum field of the flow's RFLOW_RFA register. The specified 1184 * destination queue must be valid within the Navigator Subsystem and must be 1185 * owned by the host, or a subordinate of the host, requesting allocation and 1186 * configuration of the receive flow. 1187 * 1188 * @rx_src_tag_hi: 1189 * UDMAP receive flow source tag high byte constant configuration to be 1190 * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register. 1191 * See the UDMAP section of the TRM for more information on this setting. 1192 * 1193 * @rx_src_tag_lo: 1194 * UDMAP receive flow source tag low byte constant configuration to be 1195 * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register. 1196 * See the UDMAP section of the TRM for more information on this setting. 1197 * 1198 * @rx_dest_tag_hi: 1199 * UDMAP receive flow destination tag high byte constant configuration to be 1200 * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register. 1201 * See the UDMAP section of the TRM for more information on this setting. 1202 * 1203 * @rx_dest_tag_lo: 1204 * UDMAP receive flow destination tag low byte constant configuration to be 1205 * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register. 1206 * See the UDMAP section of the TRM for more information on this setting. 1207 * 1208 * @rx_src_tag_hi_sel: 1209 * UDMAP receive flow source tag high byte selector configuration to be 1210 * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register. See 1211 * the UDMAP section of the TRM for more information on this setting. 1212 * 1213 * @rx_src_tag_lo_sel: 1214 * UDMAP receive flow source tag low byte selector configuration to be 1215 * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register. See 1216 * the UDMAP section of the TRM for more information on this setting. 1217 * 1218 * @rx_dest_tag_hi_sel: 1219 * UDMAP receive flow destination tag high byte selector configuration to be 1220 * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register. See 1221 * the UDMAP section of the TRM for more information on this setting. 1222 * 1223 * @rx_dest_tag_lo_sel: 1224 * UDMAP receive flow destination tag low byte selector configuration to be 1225 * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register. See 1226 * the UDMAP section of the TRM for more information on this setting. 1227 * 1228 * @rx_fdq0_sz0_qnum: 1229 * UDMAP receive flow free descriptor queue 0 configuration to be programmed 1230 * into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register. See the 1231 * UDMAP section of the TRM for more information on this setting. The specified 1232 * free queue must be valid within the Navigator Subsystem and must be owned 1233 * by the host, or a subordinate of the host, requesting allocation and 1234 * configuration of the receive flow. 1235 * 1236 * @rx_fdq1_qnum: 1237 * UDMAP receive flow free descriptor queue 1 configuration to be programmed 1238 * into the rx_fdq1_qnum field of the flow's RFLOW_RFD register. See the 1239 * UDMAP section of the TRM for more information on this setting. The specified 1240 * free queue must be valid within the Navigator Subsystem and must be owned 1241 * by the host, or a subordinate of the host, requesting allocation and 1242 * configuration of the receive flow. 1243 * 1244 * @rx_fdq2_qnum: 1245 * UDMAP receive flow free descriptor queue 2 configuration to be programmed 1246 * into the rx_fdq2_qnum field of the flow's RFLOW_RFE register. See the 1247 * UDMAP section of the TRM for more information on this setting. The specified 1248 * free queue must be valid within the Navigator Subsystem and must be owned 1249 * by the host, or a subordinate of the host, requesting allocation and 1250 * configuration of the receive flow. 1251 * 1252 * @rx_fdq3_qnum: 1253 * UDMAP receive flow free descriptor queue 3 configuration to be programmed 1254 * into the rx_fdq3_qnum field of the flow's RFLOW_RFE register. See the 1255 * UDMAP section of the TRM for more information on this setting. The specified 1256 * free queue must be valid within the Navigator Subsystem and must be owned 1257 * by the host, or a subordinate of the host, requesting allocation and 1258 * configuration of the receive flow. 1259 * 1260 * @rx_ps_location: 1261 * UDMAP receive flow PS words location configuration to be programmed into the 1262 * rx_ps_location field of the flow's RFLOW_RFA register. 1263 */ 1264 struct ti_sci_msg_rm_udmap_flow_cfg_req { 1265 struct ti_sci_msg_hdr hdr; 1266 u32 valid_params; 1267 u16 nav_id; 1268 u16 flow_index; 1269 u8 rx_einfo_present; 1270 u8 rx_psinfo_present; 1271 u8 rx_error_handling; 1272 u8 rx_desc_type; 1273 u16 rx_sop_offset; 1274 u16 rx_dest_qnum; 1275 u8 rx_src_tag_hi; 1276 u8 rx_src_tag_lo; 1277 u8 rx_dest_tag_hi; 1278 u8 rx_dest_tag_lo; 1279 u8 rx_src_tag_hi_sel; 1280 u8 rx_src_tag_lo_sel; 1281 u8 rx_dest_tag_hi_sel; 1282 u8 rx_dest_tag_lo_sel; 1283 u16 rx_fdq0_sz0_qnum; 1284 u16 rx_fdq1_qnum; 1285 u16 rx_fdq2_qnum; 1286 u16 rx_fdq3_qnum; 1287 u8 rx_ps_location; 1288 } __packed; 1289 1290 /** 1291 * struct ti_sci_msg_req_proc_request - Request a processor 1292 * @hdr: Generic Header 1293 * @processor_id: ID of processor being requested 1294 * 1295 * Request type is TI_SCI_MSG_PROC_REQUEST, response is a generic ACK/NACK 1296 * message. 1297 */ 1298 struct ti_sci_msg_req_proc_request { 1299 struct ti_sci_msg_hdr hdr; 1300 u8 processor_id; 1301 } __packed; 1302 1303 /** 1304 * struct ti_sci_msg_req_proc_release - Release a processor 1305 * @hdr: Generic Header 1306 * @processor_id: ID of processor being released 1307 * 1308 * Request type is TI_SCI_MSG_PROC_RELEASE, response is a generic ACK/NACK 1309 * message. 1310 */ 1311 struct ti_sci_msg_req_proc_release { 1312 struct ti_sci_msg_hdr hdr; 1313 u8 processor_id; 1314 } __packed; 1315 1316 /** 1317 * struct ti_sci_msg_req_proc_handover - Handover a processor to a host 1318 * @hdr: Generic Header 1319 * @processor_id: ID of processor being handed over 1320 * @host_id: Host ID the control needs to be transferred to 1321 * 1322 * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK 1323 * message. 1324 */ 1325 struct ti_sci_msg_req_proc_handover { 1326 struct ti_sci_msg_hdr hdr; 1327 u8 processor_id; 1328 u8 host_id; 1329 } __packed; 1330 1331 /* Boot Vector masks */ 1332 #define TI_SCI_ADDR_LOW_MASK GENMASK_ULL(31, 0) 1333 #define TI_SCI_ADDR_HIGH_MASK GENMASK_ULL(63, 32) 1334 #define TI_SCI_ADDR_HIGH_SHIFT 32 1335 1336 /** 1337 * struct ti_sci_msg_req_set_config - Set Processor boot configuration 1338 * @hdr: Generic Header 1339 * @processor_id: ID of processor being configured 1340 * @bootvector_low: Lower 32 bit address (Little Endian) of boot vector 1341 * @bootvector_high: Higher 32 bit address (Little Endian) of boot vector 1342 * @config_flags_set: Optional Processor specific Config Flags to set. 1343 * Setting a bit here implies the corresponding mode 1344 * will be set 1345 * @config_flags_clear: Optional Processor specific Config Flags to clear. 1346 * Setting a bit here implies the corresponding mode 1347 * will be cleared 1348 * 1349 * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK 1350 * message. 1351 */ 1352 struct ti_sci_msg_req_set_config { 1353 struct ti_sci_msg_hdr hdr; 1354 u8 processor_id; 1355 u32 bootvector_low; 1356 u32 bootvector_high; 1357 u32 config_flags_set; 1358 u32 config_flags_clear; 1359 } __packed; 1360 1361 /** 1362 * struct ti_sci_msg_req_set_ctrl - Set Processor boot control flags 1363 * @hdr: Generic Header 1364 * @processor_id: ID of processor being configured 1365 * @control_flags_set: Optional Processor specific Control Flags to set. 1366 * Setting a bit here implies the corresponding mode 1367 * will be set 1368 * @control_flags_clear:Optional Processor specific Control Flags to clear. 1369 * Setting a bit here implies the corresponding mode 1370 * will be cleared 1371 * 1372 * Request type is TI_SCI_MSG_SET_CTRL, response is a generic ACK/NACK 1373 * message. 1374 */ 1375 struct ti_sci_msg_req_set_ctrl { 1376 struct ti_sci_msg_hdr hdr; 1377 u8 processor_id; 1378 u32 control_flags_set; 1379 u32 control_flags_clear; 1380 } __packed; 1381 1382 /** 1383 * struct ti_sci_msg_req_get_status - Processor boot status request 1384 * @hdr: Generic Header 1385 * @processor_id: ID of processor whose status is being requested 1386 * 1387 * Request type is TI_SCI_MSG_GET_STATUS, response is an appropriate 1388 * message, or NACK in case of inability to satisfy request. 1389 */ 1390 struct ti_sci_msg_req_get_status { 1391 struct ti_sci_msg_hdr hdr; 1392 u8 processor_id; 1393 } __packed; 1394 1395 /** 1396 * struct ti_sci_msg_resp_get_status - Processor boot status response 1397 * @hdr: Generic Header 1398 * @processor_id: ID of processor whose status is returned 1399 * @bootvector_low: Lower 32 bit address (Little Endian) of boot vector 1400 * @bootvector_high: Higher 32 bit address (Little Endian) of boot vector 1401 * @config_flags: Optional Processor specific Config Flags set currently 1402 * @control_flags: Optional Processor specific Control Flags set currently 1403 * @status_flags: Optional Processor specific Status Flags set currently 1404 * 1405 * Response structure to a TI_SCI_MSG_GET_STATUS request. 1406 */ 1407 struct ti_sci_msg_resp_get_status { 1408 struct ti_sci_msg_hdr hdr; 1409 u8 processor_id; 1410 u32 bootvector_low; 1411 u32 bootvector_high; 1412 u32 config_flags; 1413 u32 control_flags; 1414 u32 status_flags; 1415 } __packed; 1416 1417 #endif /* __TI_SCI_H */ 1418