xref: /openbmc/linux/drivers/firmware/qcom_scm.h (revision e0d07278)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /* Copyright (c) 2010-2015,2019 The Linux Foundation. All rights reserved.
3  */
4 #ifndef __QCOM_SCM_INT_H
5 #define __QCOM_SCM_INT_H
6 
7 enum qcom_scm_convention {
8 	SMC_CONVENTION_UNKNOWN,
9 	SMC_CONVENTION_LEGACY,
10 	SMC_CONVENTION_ARM_32,
11 	SMC_CONVENTION_ARM_64,
12 };
13 
14 extern enum qcom_scm_convention qcom_scm_convention;
15 
16 #define MAX_QCOM_SCM_ARGS 10
17 #define MAX_QCOM_SCM_RETS 3
18 
19 enum qcom_scm_arg_types {
20 	QCOM_SCM_VAL,
21 	QCOM_SCM_RO,
22 	QCOM_SCM_RW,
23 	QCOM_SCM_BUFVAL,
24 };
25 
26 #define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
27 			   (((a) & 0x3) << 4) | \
28 			   (((b) & 0x3) << 6) | \
29 			   (((c) & 0x3) << 8) | \
30 			   (((d) & 0x3) << 10) | \
31 			   (((e) & 0x3) << 12) | \
32 			   (((f) & 0x3) << 14) | \
33 			   (((g) & 0x3) << 16) | \
34 			   (((h) & 0x3) << 18) | \
35 			   (((i) & 0x3) << 20) | \
36 			   (((j) & 0x3) << 22) | \
37 			   ((num) & 0xf))
38 
39 #define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
40 
41 
42 /**
43  * struct qcom_scm_desc
44  * @arginfo:	Metadata describing the arguments in args[]
45  * @args:	The array of arguments for the secure syscall
46  */
47 struct qcom_scm_desc {
48 	u32 svc;
49 	u32 cmd;
50 	u32 arginfo;
51 	u64 args[MAX_QCOM_SCM_ARGS];
52 	u32 owner;
53 };
54 
55 /**
56  * struct qcom_scm_res
57  * @result:	The values returned by the secure syscall
58  */
59 struct qcom_scm_res {
60 	u64 result[MAX_QCOM_SCM_RETS];
61 };
62 
63 #define SCM_SMC_FNID(s, c)	((((s) & 0xFF) << 8) | ((c) & 0xFF))
64 extern int scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
65 			struct qcom_scm_res *res, bool atomic);
66 
67 #define SCM_LEGACY_FNID(s, c)	(((s) << 10) | ((c) & 0x3ff))
68 extern int scm_legacy_call_atomic(struct device *dev,
69 				  const struct qcom_scm_desc *desc,
70 				  struct qcom_scm_res *res);
71 extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
72 			   struct qcom_scm_res *res);
73 
74 #define QCOM_SCM_SVC_BOOT		0x01
75 #define QCOM_SCM_BOOT_SET_ADDR		0x01
76 #define QCOM_SCM_BOOT_TERMINATE_PC	0x02
77 #define QCOM_SCM_BOOT_SET_DLOAD_MODE	0x10
78 #define QCOM_SCM_BOOT_SET_REMOTE_STATE	0x0a
79 #define QCOM_SCM_FLUSH_FLAG_MASK	0x3
80 
81 #define QCOM_SCM_SVC_PIL		0x02
82 #define QCOM_SCM_PIL_PAS_INIT_IMAGE	0x01
83 #define QCOM_SCM_PIL_PAS_MEM_SETUP	0x02
84 #define QCOM_SCM_PIL_PAS_AUTH_AND_RESET	0x05
85 #define QCOM_SCM_PIL_PAS_SHUTDOWN	0x06
86 #define QCOM_SCM_PIL_PAS_IS_SUPPORTED	0x07
87 #define QCOM_SCM_PIL_PAS_MSS_RESET	0x0a
88 
89 #define QCOM_SCM_SVC_IO			0x05
90 #define QCOM_SCM_IO_READ		0x01
91 #define QCOM_SCM_IO_WRITE		0x02
92 
93 #define QCOM_SCM_SVC_INFO		0x06
94 #define QCOM_SCM_INFO_IS_CALL_AVAIL	0x01
95 
96 #define QCOM_SCM_SVC_MP				0x0c
97 #define QCOM_SCM_MP_RESTORE_SEC_CFG		0x02
98 #define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE	0x03
99 #define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT	0x04
100 #define QCOM_SCM_MP_ASSIGN			0x16
101 
102 #define QCOM_SCM_SVC_OCMEM		0x0f
103 #define QCOM_SCM_OCMEM_LOCK_CMD		0x01
104 #define QCOM_SCM_OCMEM_UNLOCK_CMD	0x02
105 
106 #define QCOM_SCM_SVC_ES			0x10	/* Enterprise Security */
107 #define QCOM_SCM_ES_INVALIDATE_ICE_KEY	0x03
108 #define QCOM_SCM_ES_CONFIG_SET_ICE_KEY	0x04
109 
110 #define QCOM_SCM_SVC_HDCP		0x11
111 #define QCOM_SCM_HDCP_INVOKE		0x01
112 
113 #define QCOM_SCM_SVC_SMMU_PROGRAM		0x15
114 #define QCOM_SCM_SMMU_CONFIG_ERRATA1		0x03
115 #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL	0x02
116 
117 extern void __qcom_scm_init(void);
118 
119 /* common error codes */
120 #define QCOM_SCM_V2_EBUSY	-12
121 #define QCOM_SCM_ENOMEM		-5
122 #define QCOM_SCM_EOPNOTSUPP	-4
123 #define QCOM_SCM_EINVAL_ADDR	-3
124 #define QCOM_SCM_EINVAL_ARG	-2
125 #define QCOM_SCM_ERROR		-1
126 #define QCOM_SCM_INTERRUPTED	1
127 
128 static inline int qcom_scm_remap_error(int err)
129 {
130 	switch (err) {
131 	case QCOM_SCM_ERROR:
132 		return -EIO;
133 	case QCOM_SCM_EINVAL_ADDR:
134 	case QCOM_SCM_EINVAL_ARG:
135 		return -EINVAL;
136 	case QCOM_SCM_EOPNOTSUPP:
137 		return -EOPNOTSUPP;
138 	case QCOM_SCM_ENOMEM:
139 		return -ENOMEM;
140 	case QCOM_SCM_V2_EBUSY:
141 		return -EBUSY;
142 	}
143 	return -EINVAL;
144 }
145 
146 #endif
147