xref: /openbmc/linux/drivers/firmware/imx/imx-scu.c (revision 15e3ae36)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2018 NXP
4  *  Author: Dong Aisheng <aisheng.dong@nxp.com>
5  *
6  * Implementation of the SCU IPC functions using MUs (client side).
7  *
8  */
9 
10 #include <linux/err.h>
11 #include <linux/firmware/imx/types.h>
12 #include <linux/firmware/imx/ipc.h>
13 #include <linux/firmware/imx/sci.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/kernel.h>
17 #include <linux/mailbox_client.h>
18 #include <linux/module.h>
19 #include <linux/mutex.h>
20 #include <linux/of_platform.h>
21 #include <linux/platform_device.h>
22 
23 #define SCU_MU_CHAN_NUM		8
24 #define MAX_RX_TIMEOUT		(msecs_to_jiffies(30))
25 
26 struct imx_sc_chan {
27 	struct imx_sc_ipc *sc_ipc;
28 
29 	struct mbox_client cl;
30 	struct mbox_chan *ch;
31 	int idx;
32 	struct completion tx_done;
33 };
34 
35 struct imx_sc_ipc {
36 	/* SCU uses 4 Tx and 4 Rx channels */
37 	struct imx_sc_chan chans[SCU_MU_CHAN_NUM];
38 	struct device *dev;
39 	struct mutex lock;
40 	struct completion done;
41 
42 	/* temporarily store the SCU msg */
43 	u32 *msg;
44 	u8 rx_size;
45 	u8 count;
46 };
47 
48 /*
49  * This type is used to indicate error response for most functions.
50  */
51 enum imx_sc_error_codes {
52 	IMX_SC_ERR_NONE = 0,	/* Success */
53 	IMX_SC_ERR_VERSION = 1,	/* Incompatible API version */
54 	IMX_SC_ERR_CONFIG = 2,	/* Configuration error */
55 	IMX_SC_ERR_PARM = 3,	/* Bad parameter */
56 	IMX_SC_ERR_NOACCESS = 4,	/* Permission error (no access) */
57 	IMX_SC_ERR_LOCKED = 5,	/* Permission error (locked) */
58 	IMX_SC_ERR_UNAVAILABLE = 6,	/* Unavailable (out of resources) */
59 	IMX_SC_ERR_NOTFOUND = 7,	/* Not found */
60 	IMX_SC_ERR_NOPOWER = 8,	/* No power */
61 	IMX_SC_ERR_IPC = 9,		/* Generic IPC error */
62 	IMX_SC_ERR_BUSY = 10,	/* Resource is currently busy/active */
63 	IMX_SC_ERR_FAIL = 11,	/* General I/O failure */
64 	IMX_SC_ERR_LAST
65 };
66 
67 static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = {
68 	0,	 /* IMX_SC_ERR_NONE */
69 	-EINVAL, /* IMX_SC_ERR_VERSION */
70 	-EINVAL, /* IMX_SC_ERR_CONFIG */
71 	-EINVAL, /* IMX_SC_ERR_PARM */
72 	-EACCES, /* IMX_SC_ERR_NOACCESS */
73 	-EACCES, /* IMX_SC_ERR_LOCKED */
74 	-ERANGE, /* IMX_SC_ERR_UNAVAILABLE */
75 	-EEXIST, /* IMX_SC_ERR_NOTFOUND */
76 	-EPERM,	 /* IMX_SC_ERR_NOPOWER */
77 	-EPIPE,	 /* IMX_SC_ERR_IPC */
78 	-EBUSY,	 /* IMX_SC_ERR_BUSY */
79 	-EIO,	 /* IMX_SC_ERR_FAIL */
80 };
81 
82 static struct imx_sc_ipc *imx_sc_ipc_handle;
83 
84 static inline int imx_sc_to_linux_errno(int errno)
85 {
86 	if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST)
87 		return imx_sc_linux_errmap[errno];
88 	return -EIO;
89 }
90 
91 /*
92  * Get the default handle used by SCU
93  */
94 int imx_scu_get_handle(struct imx_sc_ipc **ipc)
95 {
96 	if (!imx_sc_ipc_handle)
97 		return -EPROBE_DEFER;
98 
99 	*ipc = imx_sc_ipc_handle;
100 	return 0;
101 }
102 EXPORT_SYMBOL(imx_scu_get_handle);
103 
104 /* Callback called when the word of a message is ack-ed, eg read by SCU */
105 static void imx_scu_tx_done(struct mbox_client *cl, void *mssg, int r)
106 {
107 	struct imx_sc_chan *sc_chan = container_of(cl, struct imx_sc_chan, cl);
108 
109 	complete(&sc_chan->tx_done);
110 }
111 
112 static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
113 {
114 	struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl);
115 	struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
116 	struct imx_sc_rpc_msg *hdr;
117 	u32 *data = msg;
118 
119 	if (!sc_ipc->msg) {
120 		dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n",
121 				sc_chan->idx, *data);
122 		return;
123 	}
124 
125 	if (sc_chan->idx == 0) {
126 		hdr = msg;
127 		sc_ipc->rx_size = hdr->size;
128 		dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size);
129 		if (sc_ipc->rx_size > 4)
130 			dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n",
131 				 sc_ipc->rx_size);
132 	}
133 
134 	sc_ipc->msg[sc_chan->idx] = *data;
135 	sc_ipc->count++;
136 
137 	dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx,
138 		sc_ipc->count, *data);
139 
140 	if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size))
141 		complete(&sc_ipc->done);
142 }
143 
144 static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
145 {
146 	struct imx_sc_rpc_msg *hdr = msg;
147 	struct imx_sc_chan *sc_chan;
148 	u32 *data = msg;
149 	int ret;
150 	int i;
151 
152 	/* Check size */
153 	if (hdr->size > IMX_SC_RPC_MAX_MSG)
154 		return -EINVAL;
155 
156 	dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr->svc,
157 		hdr->func, hdr->size);
158 
159 	for (i = 0; i < hdr->size; i++) {
160 		sc_chan = &sc_ipc->chans[i % 4];
161 
162 		/*
163 		 * SCU requires that all messages words are written
164 		 * sequentially but linux MU driver implements multiple
165 		 * independent channels for each register so ordering between
166 		 * different channels must be ensured by SCU API interface.
167 		 *
168 		 * Wait for tx_done before every send to ensure that no
169 		 * queueing happens at the mailbox channel level.
170 		 */
171 		wait_for_completion(&sc_chan->tx_done);
172 		reinit_completion(&sc_chan->tx_done);
173 
174 		ret = mbox_send_message(sc_chan->ch, &data[i]);
175 		if (ret < 0)
176 			return ret;
177 	}
178 
179 	return 0;
180 }
181 
182 /*
183  * RPC command/response
184  */
185 int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
186 {
187 	uint8_t saved_svc, saved_func;
188 	struct imx_sc_rpc_msg *hdr;
189 	int ret;
190 
191 	if (WARN_ON(!sc_ipc || !msg))
192 		return -EINVAL;
193 
194 	mutex_lock(&sc_ipc->lock);
195 	reinit_completion(&sc_ipc->done);
196 
197 	if (have_resp) {
198 		sc_ipc->msg = msg;
199 		saved_svc = ((struct imx_sc_rpc_msg *)msg)->svc;
200 		saved_func = ((struct imx_sc_rpc_msg *)msg)->func;
201 	}
202 	sc_ipc->count = 0;
203 	ret = imx_scu_ipc_write(sc_ipc, msg);
204 	if (ret < 0) {
205 		dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret);
206 		goto out;
207 	}
208 
209 	if (have_resp) {
210 		if (!wait_for_completion_timeout(&sc_ipc->done,
211 						 MAX_RX_TIMEOUT)) {
212 			dev_err(sc_ipc->dev, "RPC send msg timeout\n");
213 			mutex_unlock(&sc_ipc->lock);
214 			return -ETIMEDOUT;
215 		}
216 
217 		/* response status is stored in hdr->func field */
218 		hdr = msg;
219 		ret = hdr->func;
220 		/*
221 		 * Some special SCU firmware APIs do NOT have return value
222 		 * in hdr->func, but they do have response data, those special
223 		 * APIs are defined as void function in SCU firmware, so they
224 		 * should be treated as return success always.
225 		 */
226 		if ((saved_svc == IMX_SC_RPC_SVC_MISC) &&
227 			(saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID ||
228 			 saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS))
229 			ret = 0;
230 	}
231 
232 out:
233 	sc_ipc->msg = NULL;
234 	mutex_unlock(&sc_ipc->lock);
235 
236 	dev_dbg(sc_ipc->dev, "RPC SVC done\n");
237 
238 	return imx_sc_to_linux_errno(ret);
239 }
240 EXPORT_SYMBOL(imx_scu_call_rpc);
241 
242 static int imx_scu_probe(struct platform_device *pdev)
243 {
244 	struct device *dev = &pdev->dev;
245 	struct imx_sc_ipc *sc_ipc;
246 	struct imx_sc_chan *sc_chan;
247 	struct mbox_client *cl;
248 	char *chan_name;
249 	int ret;
250 	int i;
251 
252 	sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL);
253 	if (!sc_ipc)
254 		return -ENOMEM;
255 
256 	for (i = 0; i < SCU_MU_CHAN_NUM; i++) {
257 		if (i < 4)
258 			chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
259 		else
260 			chan_name = kasprintf(GFP_KERNEL, "rx%d", i - 4);
261 
262 		if (!chan_name)
263 			return -ENOMEM;
264 
265 		sc_chan = &sc_ipc->chans[i];
266 		cl = &sc_chan->cl;
267 		cl->dev = dev;
268 		cl->tx_block = false;
269 		cl->knows_txdone = true;
270 		cl->rx_callback = imx_scu_rx_callback;
271 
272 		/* Initial tx_done completion as "done" */
273 		cl->tx_done = imx_scu_tx_done;
274 		init_completion(&sc_chan->tx_done);
275 		complete(&sc_chan->tx_done);
276 
277 		sc_chan->sc_ipc = sc_ipc;
278 		sc_chan->idx = i % 4;
279 		sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
280 		if (IS_ERR(sc_chan->ch)) {
281 			ret = PTR_ERR(sc_chan->ch);
282 			if (ret != -EPROBE_DEFER)
283 				dev_err(dev, "Failed to request mbox chan %s ret %d\n",
284 					chan_name, ret);
285 			return ret;
286 		}
287 
288 		dev_dbg(dev, "request mbox chan %s\n", chan_name);
289 		/* chan_name is not used anymore by framework */
290 		kfree(chan_name);
291 	}
292 
293 	sc_ipc->dev = dev;
294 	mutex_init(&sc_ipc->lock);
295 	init_completion(&sc_ipc->done);
296 
297 	imx_sc_ipc_handle = sc_ipc;
298 
299 	ret = imx_scu_enable_general_irq_channel(dev);
300 	if (ret)
301 		dev_warn(dev,
302 			"failed to enable general irq channel: %d\n", ret);
303 
304 	dev_info(dev, "NXP i.MX SCU Initialized\n");
305 
306 	return devm_of_platform_populate(dev);
307 }
308 
309 static const struct of_device_id imx_scu_match[] = {
310 	{ .compatible = "fsl,imx-scu", },
311 	{ /* Sentinel */ }
312 };
313 
314 static struct platform_driver imx_scu_driver = {
315 	.driver = {
316 		.name = "imx-scu",
317 		.of_match_table = imx_scu_match,
318 	},
319 	.probe = imx_scu_probe,
320 };
321 builtin_platform_driver(imx_scu_driver);
322 
323 MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>");
324 MODULE_DESCRIPTION("IMX SCU firmware protocol driver");
325 MODULE_LICENSE("GPL v2");
326