1# SPDX-License-Identifier: GPL-2.0-only 2# 3# For a description of the syntax of this configuration file, 4# see Documentation/kbuild/kconfig-language.rst. 5# 6 7menu "Firmware Drivers" 8 9config ARM_SCMI_PROTOCOL 10 bool "ARM System Control and Management Interface (SCMI) Message Protocol" 11 depends on ARM || ARM64 || COMPILE_TEST 12 depends on MAILBOX 13 help 14 ARM System Control and Management Interface (SCMI) protocol is a 15 set of operating system-independent software interfaces that are 16 used in system management. SCMI is extensible and currently provides 17 interfaces for: Discovery and self-description of the interfaces 18 it supports, Power domain management which is the ability to place 19 a given device or domain into the various power-saving states that 20 it supports, Performance management which is the ability to control 21 the performance of a domain that is composed of compute engines 22 such as application processors and other accelerators, Clock 23 management which is the ability to set and inquire rates on platform 24 managed clocks and Sensor management which is the ability to read 25 sensor data, and be notified of sensor value. 26 27 This protocol library provides interface for all the client drivers 28 making use of the features offered by the SCMI. 29 30config ARM_SCMI_POWER_DOMAIN 31 tristate "SCMI power domain driver" 32 depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) 33 default y 34 select PM_GENERIC_DOMAINS if PM 35 help 36 This enables support for the SCMI power domains which can be 37 enabled or disabled via the SCP firmware 38 39 This driver can also be built as a module. If so, the module 40 will be called scmi_pm_domain. Note this may needed early in boot 41 before rootfs may be available. 42 43config ARM_SCPI_PROTOCOL 44 tristate "ARM System Control and Power Interface (SCPI) Message Protocol" 45 depends on ARM || ARM64 || COMPILE_TEST 46 depends on MAILBOX 47 help 48 System Control and Power Interface (SCPI) Message Protocol is 49 defined for the purpose of communication between the Application 50 Cores(AP) and the System Control Processor(SCP). The MHU peripheral 51 provides a mechanism for inter-processor communication between SCP 52 and AP. 53 54 SCP controls most of the power managament on the Application 55 Processors. It offers control and management of: the core/cluster 56 power states, various power domain DVFS including the core/cluster, 57 certain system clocks configuration, thermal sensors and many 58 others. 59 60 This protocol library provides interface for all the client drivers 61 making use of the features offered by the SCP. 62 63config ARM_SCPI_POWER_DOMAIN 64 tristate "SCPI power domain driver" 65 depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF) 66 default y 67 select PM_GENERIC_DOMAINS if PM 68 help 69 This enables support for the SCPI power domains which can be 70 enabled or disabled via the SCP firmware 71 72config ARM_SDE_INTERFACE 73 bool "ARM Software Delegated Exception Interface (SDEI)" 74 depends on ARM64 75 help 76 The Software Delegated Exception Interface (SDEI) is an ARM 77 standard for registering callbacks from the platform firmware 78 into the OS. This is typically used to implement RAS notifications. 79 80config EDD 81 tristate "BIOS Enhanced Disk Drive calls determine boot disk" 82 depends on X86 83 help 84 Say Y or M here if you want to enable BIOS Enhanced Disk Drive 85 Services real mode BIOS calls to determine which disk 86 BIOS tries boot from. This information is then exported via sysfs. 87 88 This option is experimental and is known to fail to boot on some 89 obscure configurations. Most disk controller BIOS vendors do 90 not yet implement this feature. 91 92config EDD_OFF 93 bool "Sets default behavior for EDD detection to off" 94 depends on EDD 95 default n 96 help 97 Say Y if you want EDD disabled by default, even though it is compiled into the 98 kernel. Say N if you want EDD enabled by default. EDD can be dynamically set 99 using the kernel parameter 'edd={on|skipmbr|off}'. 100 101config FIRMWARE_MEMMAP 102 bool "Add firmware-provided memory map to sysfs" if EXPERT 103 default X86 104 help 105 Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. 106 That memory map is used for example by kexec to set up parameter area 107 for the next kernel, but can also be used for debugging purposes. 108 109 See also Documentation/ABI/testing/sysfs-firmware-memmap. 110 111config EFI_PCDP 112 bool "Console device selection via EFI PCDP or HCDP table" 113 depends on ACPI && EFI && IA64 114 default y if IA64 115 help 116 If your firmware supplies the PCDP table, and you want to 117 automatically use the primary console device it describes 118 as the Linux console, say Y here. 119 120 If your firmware supplies the HCDP table, and you want to 121 use the first serial port it describes as the Linux console, 122 say Y here. If your EFI ConOut path contains only a UART 123 device, it will become the console automatically. Otherwise, 124 you must specify the "console=hcdp" kernel boot argument. 125 126 Neither the PCDP nor the HCDP affects naming of serial devices, 127 so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending 128 on how the driver discovers devices. 129 130 You must also enable the appropriate drivers (serial, VGA, etc.) 131 132 See DIG64_HCDPv20_042804.pdf available from 133 <http://www.dig64.org/specifications/> 134 135config DMIID 136 bool "Export DMI identification via sysfs to userspace" 137 depends on DMI 138 default y 139 help 140 Say Y here if you want to query SMBIOS/DMI system identification 141 information from userspace through /sys/class/dmi/id/ or if you want 142 DMI-based module auto-loading. 143 144config DMI_SYSFS 145 tristate "DMI table support in sysfs" 146 depends on SYSFS && DMI 147 default n 148 help 149 Say Y or M here to enable the exporting of the raw DMI table 150 data via sysfs. This is useful for consuming the data without 151 requiring any access to /dev/mem at all. Tables are found 152 under /sys/firmware/dmi when this option is enabled and 153 loaded. 154 155config DMI_SCAN_MACHINE_NON_EFI_FALLBACK 156 bool 157 158config ISCSI_IBFT_FIND 159 bool "iSCSI Boot Firmware Table Attributes" 160 depends on X86 && ACPI 161 default n 162 help 163 This option enables the kernel to find the region of memory 164 in which the ISCSI Boot Firmware Table (iBFT) resides. This 165 is necessary for iSCSI Boot Firmware Table Attributes module to work 166 properly. 167 168config ISCSI_IBFT 169 tristate "iSCSI Boot Firmware Table Attributes module" 170 select ISCSI_BOOT_SYSFS 171 depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL 172 default n 173 help 174 This option enables support for detection and exposing of iSCSI 175 Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to 176 detect iSCSI boot parameters dynamically during system boot, say Y. 177 Otherwise, say N. 178 179config RASPBERRYPI_FIRMWARE 180 tristate "Raspberry Pi Firmware Driver" 181 depends on BCM2835_MBOX 182 help 183 This option enables support for communicating with the firmware on the 184 Raspberry Pi. 185 186config FW_CFG_SYSFS 187 tristate "QEMU fw_cfg device support in sysfs" 188 depends on SYSFS && (ARM || ARM64 || PPC_PMAC || SPARC || X86) 189 depends on HAS_IOPORT_MAP 190 default n 191 help 192 Say Y or M here to enable the exporting of the QEMU firmware 193 configuration (fw_cfg) file entries via sysfs. Entries are 194 found under /sys/firmware/fw_cfg when this option is enabled 195 and loaded. 196 197config FW_CFG_SYSFS_CMDLINE 198 bool "QEMU fw_cfg device parameter parsing" 199 depends on FW_CFG_SYSFS 200 help 201 Allow the qemu_fw_cfg device to be initialized via the kernel 202 command line or using a module parameter. 203 WARNING: Using incorrect parameters (base address in particular) 204 may crash your system. 205 206config INTEL_STRATIX10_SERVICE 207 tristate "Intel Stratix10 Service Layer" 208 depends on ARCH_STRATIX10 && HAVE_ARM_SMCCC 209 default n 210 help 211 Intel Stratix10 service layer runs at privileged exception level, 212 interfaces with the service providers (FPGA manager is one of them) 213 and manages secure monitor call to communicate with secure monitor 214 software at secure monitor exception level. 215 216 Say Y here if you want Stratix10 service layer support. 217 218config QCOM_SCM 219 bool 220 depends on ARM || ARM64 221 select RESET_CONTROLLER 222 223config QCOM_SCM_32 224 def_bool y 225 depends on QCOM_SCM && ARM 226 227config QCOM_SCM_64 228 def_bool y 229 depends on QCOM_SCM && ARM64 230 231config QCOM_SCM_DOWNLOAD_MODE_DEFAULT 232 bool "Qualcomm download mode enabled by default" 233 depends on QCOM_SCM 234 help 235 A device with "download mode" enabled will upon an unexpected 236 warm-restart enter a special debug mode that allows the user to 237 "download" memory content over USB for offline postmortem analysis. 238 The feature can be enabled/disabled on the kernel command line. 239 240 Say Y here to enable "download mode" by default. 241 242config TI_SCI_PROTOCOL 243 tristate "TI System Control Interface (TISCI) Message Protocol" 244 depends on TI_MESSAGE_MANAGER 245 help 246 TI System Control Interface (TISCI) Message Protocol is used to manage 247 compute systems such as ARM, DSP etc with the system controller in 248 complex System on Chip(SoC) such as those found on certain keystone 249 generation SoC from TI. 250 251 System controller provides various facilities including power 252 management function support. 253 254 This protocol library is used by client drivers to use the features 255 provided by the system controller. 256 257config TRUSTED_FOUNDATIONS 258 bool "Trusted Foundations secure monitor support" 259 depends on ARM && CPU_V7 260 help 261 Some devices (including most early Tegra-based consumer devices on 262 the market) are booted with the Trusted Foundations secure monitor 263 active, requiring some core operations to be performed by the secure 264 monitor instead of the kernel. 265 266 This option allows the kernel to invoke the secure monitor whenever 267 required on devices using Trusted Foundations. See the functions and 268 comments in linux/firmware/trusted_foundations.h or the device tree 269 bindings for "tlm,trusted-foundations" for details on how to use it. 270 271 Choose N if you don't know what this is about. 272 273config HAVE_ARM_SMCCC 274 bool 275 276source "drivers/firmware/psci/Kconfig" 277source "drivers/firmware/broadcom/Kconfig" 278source "drivers/firmware/google/Kconfig" 279source "drivers/firmware/efi/Kconfig" 280source "drivers/firmware/imx/Kconfig" 281source "drivers/firmware/meson/Kconfig" 282source "drivers/firmware/tegra/Kconfig" 283source "drivers/firmware/xilinx/Kconfig" 284 285endmenu 286