1# 2# For a description of the syntax of this configuration file, 3# see Documentation/kbuild/kconfig-language.txt. 4# 5 6menu "Firmware Drivers" 7 8config ARM_PSCI_FW 9 bool 10 11config ARM_PSCI_CHECKER 12 bool "ARM PSCI checker" 13 depends on ARM_PSCI_FW && HOTPLUG_CPU && !TORTURE_TEST 14 help 15 Run the PSCI checker during startup. This checks that hotplug and 16 suspend operations work correctly when using PSCI. 17 18 The torture tests may interfere with the PSCI checker by turning CPUs 19 on and off through hotplug, so for now torture tests and PSCI checker 20 are mutually exclusive. 21 22config ARM_SCPI_PROTOCOL 23 tristate "ARM System Control and Power Interface (SCPI) Message Protocol" 24 depends on ARM || ARM64 || COMPILE_TEST 25 depends on MAILBOX 26 help 27 System Control and Power Interface (SCPI) Message Protocol is 28 defined for the purpose of communication between the Application 29 Cores(AP) and the System Control Processor(SCP). The MHU peripheral 30 provides a mechanism for inter-processor communication between SCP 31 and AP. 32 33 SCP controls most of the power managament on the Application 34 Processors. It offers control and management of: the core/cluster 35 power states, various power domain DVFS including the core/cluster, 36 certain system clocks configuration, thermal sensors and many 37 others. 38 39 This protocol library provides interface for all the client drivers 40 making use of the features offered by the SCP. 41 42config ARM_SCPI_POWER_DOMAIN 43 tristate "SCPI power domain driver" 44 depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF) 45 default y 46 select PM_GENERIC_DOMAINS if PM 47 help 48 This enables support for the SCPI power domains which can be 49 enabled or disabled via the SCP firmware 50 51config EDD 52 tristate "BIOS Enhanced Disk Drive calls determine boot disk" 53 depends on X86 54 help 55 Say Y or M here if you want to enable BIOS Enhanced Disk Drive 56 Services real mode BIOS calls to determine which disk 57 BIOS tries boot from. This information is then exported via sysfs. 58 59 This option is experimental and is known to fail to boot on some 60 obscure configurations. Most disk controller BIOS vendors do 61 not yet implement this feature. 62 63config EDD_OFF 64 bool "Sets default behavior for EDD detection to off" 65 depends on EDD 66 default n 67 help 68 Say Y if you want EDD disabled by default, even though it is compiled into the 69 kernel. Say N if you want EDD enabled by default. EDD can be dynamically set 70 using the kernel parameter 'edd={on|skipmbr|off}'. 71 72config FIRMWARE_MEMMAP 73 bool "Add firmware-provided memory map to sysfs" if EXPERT 74 default X86 75 help 76 Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. 77 That memory map is used for example by kexec to set up parameter area 78 for the next kernel, but can also be used for debugging purposes. 79 80 See also Documentation/ABI/testing/sysfs-firmware-memmap. 81 82config EFI_PCDP 83 bool "Console device selection via EFI PCDP or HCDP table" 84 depends on ACPI && EFI && IA64 85 default y if IA64 86 help 87 If your firmware supplies the PCDP table, and you want to 88 automatically use the primary console device it describes 89 as the Linux console, say Y here. 90 91 If your firmware supplies the HCDP table, and you want to 92 use the first serial port it describes as the Linux console, 93 say Y here. If your EFI ConOut path contains only a UART 94 device, it will become the console automatically. Otherwise, 95 you must specify the "console=hcdp" kernel boot argument. 96 97 Neither the PCDP nor the HCDP affects naming of serial devices, 98 so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending 99 on how the driver discovers devices. 100 101 You must also enable the appropriate drivers (serial, VGA, etc.) 102 103 See DIG64_HCDPv20_042804.pdf available from 104 <http://www.dig64.org/specifications/> 105 106config DELL_RBU 107 tristate "BIOS update support for DELL systems via sysfs" 108 depends on X86 109 select FW_LOADER 110 select FW_LOADER_USER_HELPER 111 help 112 Say m if you want to have the option of updating the BIOS for your 113 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP) 114 supporting application to communicate with the BIOS regarding the new 115 image for the image update to take effect. 116 See <file:Documentation/dell_rbu.txt> for more details on the driver. 117 118config DCDBAS 119 tristate "Dell Systems Management Base Driver" 120 depends on X86 121 help 122 The Dell Systems Management Base Driver provides a sysfs interface 123 for systems management software to perform System Management 124 Interrupts (SMIs) and Host Control Actions (system power cycle or 125 power off after OS shutdown) on certain Dell systems. 126 127 See <file:Documentation/dcdbas.txt> for more details on the driver 128 and the Dell systems on which Dell systems management software makes 129 use of this driver. 130 131 Say Y or M here to enable the driver for use by Dell systems 132 management software such as Dell OpenManage. 133 134config DMIID 135 bool "Export DMI identification via sysfs to userspace" 136 depends on DMI 137 default y 138 help 139 Say Y here if you want to query SMBIOS/DMI system identification 140 information from userspace through /sys/class/dmi/id/ or if you want 141 DMI-based module auto-loading. 142 143config DMI_SYSFS 144 tristate "DMI table support in sysfs" 145 depends on SYSFS && DMI 146 default n 147 help 148 Say Y or M here to enable the exporting of the raw DMI table 149 data via sysfs. This is useful for consuming the data without 150 requiring any access to /dev/mem at all. Tables are found 151 under /sys/firmware/dmi when this option is enabled and 152 loaded. 153 154config DMI_SCAN_MACHINE_NON_EFI_FALLBACK 155 bool 156 157config ISCSI_IBFT_FIND 158 bool "iSCSI Boot Firmware Table Attributes" 159 depends on X86 && ACPI 160 default n 161 help 162 This option enables the kernel to find the region of memory 163 in which the ISCSI Boot Firmware Table (iBFT) resides. This 164 is necessary for iSCSI Boot Firmware Table Attributes module to work 165 properly. 166 167config ISCSI_IBFT 168 tristate "iSCSI Boot Firmware Table Attributes module" 169 select ISCSI_BOOT_SYSFS 170 depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL 171 default n 172 help 173 This option enables support for detection and exposing of iSCSI 174 Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to 175 detect iSCSI boot parameters dynamically during system boot, say Y. 176 Otherwise, say N. 177 178config RASPBERRYPI_FIRMWARE 179 tristate "Raspberry Pi Firmware Driver" 180 depends on BCM2835_MBOX 181 help 182 This option enables support for communicating with the firmware on the 183 Raspberry Pi. 184 185config FW_CFG_SYSFS 186 tristate "QEMU fw_cfg device support in sysfs" 187 depends on SYSFS && (ARM || ARM64 || PPC_PMAC || SPARC || X86) 188 depends on HAS_IOPORT_MAP 189 default n 190 help 191 Say Y or M here to enable the exporting of the QEMU firmware 192 configuration (fw_cfg) file entries via sysfs. Entries are 193 found under /sys/firmware/fw_cfg when this option is enabled 194 and loaded. 195 196config FW_CFG_SYSFS_CMDLINE 197 bool "QEMU fw_cfg device parameter parsing" 198 depends on FW_CFG_SYSFS 199 help 200 Allow the qemu_fw_cfg device to be initialized via the kernel 201 command line or using a module parameter. 202 WARNING: Using incorrect parameters (base address in particular) 203 may crash your system. 204 205config QCOM_SCM 206 bool 207 depends on ARM || ARM64 208 select RESET_CONTROLLER 209 210config QCOM_SCM_32 211 def_bool y 212 depends on QCOM_SCM && ARM 213 214config QCOM_SCM_64 215 def_bool y 216 depends on QCOM_SCM && ARM64 217 218config TI_SCI_PROTOCOL 219 tristate "TI System Control Interface (TISCI) Message Protocol" 220 depends on TI_MESSAGE_MANAGER 221 help 222 TI System Control Interface (TISCI) Message Protocol is used to manage 223 compute systems such as ARM, DSP etc with the system controller in 224 complex System on Chip(SoC) such as those found on certain keystone 225 generation SoC from TI. 226 227 System controller provides various facilities including power 228 management function support. 229 230 This protocol library is used by client drivers to use the features 231 provided by the system controller. 232 233config HAVE_ARM_SMCCC 234 bool 235 236source "drivers/firmware/broadcom/Kconfig" 237source "drivers/firmware/google/Kconfig" 238source "drivers/firmware/efi/Kconfig" 239source "drivers/firmware/meson/Kconfig" 240source "drivers/firmware/tegra/Kconfig" 241 242endmenu 243