xref: /openbmc/linux/drivers/firewire/nosy.c (revision 884caada)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * nosy - Snoop mode driver for TI PCILynx 1394 controllers
4  * Copyright (C) 2002-2007 Kristian Høgsberg
5  */
6 
7 #include <linux/device.h>
8 #include <linux/errno.h>
9 #include <linux/fs.h>
10 #include <linux/init.h>
11 #include <linux/interrupt.h>
12 #include <linux/io.h>
13 #include <linux/kernel.h>
14 #include <linux/kref.h>
15 #include <linux/miscdevice.h>
16 #include <linux/module.h>
17 #include <linux/mutex.h>
18 #include <linux/pci.h>
19 #include <linux/poll.h>
20 #include <linux/sched.h> /* required for linux/wait.h */
21 #include <linux/slab.h>
22 #include <linux/spinlock.h>
23 #include <linux/time64.h>
24 #include <linux/timex.h>
25 #include <linux/uaccess.h>
26 #include <linux/wait.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/atomic.h>
29 #include <asm/byteorder.h>
30 
31 #include "nosy.h"
32 #include "nosy-user.h"
33 
34 #define TCODE_PHY_PACKET		0x10
35 #define PCI_DEVICE_ID_TI_PCILYNX	0x8000
36 
37 static char driver_name[] = KBUILD_MODNAME;
38 
39 /* this is the physical layout of a PCL, its size is 128 bytes */
40 struct pcl {
41 	__le32 next;
42 	__le32 async_error_next;
43 	u32 user_data;
44 	__le32 pcl_status;
45 	__le32 remaining_transfer_count;
46 	__le32 next_data_buffer;
47 	struct {
48 		__le32 control;
49 		__le32 pointer;
50 	} buffer[13];
51 };
52 
53 struct packet {
54 	unsigned int length;
55 	char data[0];
56 };
57 
58 struct packet_buffer {
59 	char *data;
60 	size_t capacity;
61 	long total_packet_count, lost_packet_count;
62 	atomic_t size;
63 	struct packet *head, *tail;
64 	wait_queue_head_t wait;
65 };
66 
67 struct pcilynx {
68 	struct pci_dev *pci_device;
69 	__iomem char *registers;
70 
71 	struct pcl *rcv_start_pcl, *rcv_pcl;
72 	__le32 *rcv_buffer;
73 
74 	dma_addr_t rcv_start_pcl_bus, rcv_pcl_bus, rcv_buffer_bus;
75 
76 	spinlock_t client_list_lock;
77 	struct list_head client_list;
78 
79 	struct miscdevice misc;
80 	struct list_head link;
81 	struct kref kref;
82 };
83 
84 static inline struct pcilynx *
85 lynx_get(struct pcilynx *lynx)
86 {
87 	kref_get(&lynx->kref);
88 
89 	return lynx;
90 }
91 
92 static void
93 lynx_release(struct kref *kref)
94 {
95 	kfree(container_of(kref, struct pcilynx, kref));
96 }
97 
98 static inline void
99 lynx_put(struct pcilynx *lynx)
100 {
101 	kref_put(&lynx->kref, lynx_release);
102 }
103 
104 struct client {
105 	struct pcilynx *lynx;
106 	u32 tcode_mask;
107 	struct packet_buffer buffer;
108 	struct list_head link;
109 };
110 
111 static DEFINE_MUTEX(card_mutex);
112 static LIST_HEAD(card_list);
113 
114 static int
115 packet_buffer_init(struct packet_buffer *buffer, size_t capacity)
116 {
117 	buffer->data = kmalloc(capacity, GFP_KERNEL);
118 	if (buffer->data == NULL)
119 		return -ENOMEM;
120 	buffer->head = (struct packet *) buffer->data;
121 	buffer->tail = (struct packet *) buffer->data;
122 	buffer->capacity = capacity;
123 	buffer->lost_packet_count = 0;
124 	atomic_set(&buffer->size, 0);
125 	init_waitqueue_head(&buffer->wait);
126 
127 	return 0;
128 }
129 
130 static void
131 packet_buffer_destroy(struct packet_buffer *buffer)
132 {
133 	kfree(buffer->data);
134 }
135 
136 static int
137 packet_buffer_get(struct client *client, char __user *data, size_t user_length)
138 {
139 	struct packet_buffer *buffer = &client->buffer;
140 	size_t length;
141 	char *end;
142 
143 	if (wait_event_interruptible(buffer->wait,
144 				     atomic_read(&buffer->size) > 0) ||
145 				     list_empty(&client->lynx->link))
146 		return -ERESTARTSYS;
147 
148 	if (atomic_read(&buffer->size) == 0)
149 		return -ENODEV;
150 
151 	/* FIXME: Check length <= user_length. */
152 
153 	end = buffer->data + buffer->capacity;
154 	length = buffer->head->length;
155 
156 	if (&buffer->head->data[length] < end) {
157 		if (copy_to_user(data, buffer->head->data, length))
158 			return -EFAULT;
159 		buffer->head = (struct packet *) &buffer->head->data[length];
160 	} else {
161 		size_t split = end - buffer->head->data;
162 
163 		if (copy_to_user(data, buffer->head->data, split))
164 			return -EFAULT;
165 		if (copy_to_user(data + split, buffer->data, length - split))
166 			return -EFAULT;
167 		buffer->head = (struct packet *) &buffer->data[length - split];
168 	}
169 
170 	/*
171 	 * Decrease buffer->size as the last thing, since this is what
172 	 * keeps the interrupt from overwriting the packet we are
173 	 * retrieving from the buffer.
174 	 */
175 	atomic_sub(sizeof(struct packet) + length, &buffer->size);
176 
177 	return length;
178 }
179 
180 static void
181 packet_buffer_put(struct packet_buffer *buffer, void *data, size_t length)
182 {
183 	char *end;
184 
185 	buffer->total_packet_count++;
186 
187 	if (buffer->capacity <
188 	    atomic_read(&buffer->size) + sizeof(struct packet) + length) {
189 		buffer->lost_packet_count++;
190 		return;
191 	}
192 
193 	end = buffer->data + buffer->capacity;
194 	buffer->tail->length = length;
195 
196 	if (&buffer->tail->data[length] < end) {
197 		memcpy(buffer->tail->data, data, length);
198 		buffer->tail = (struct packet *) &buffer->tail->data[length];
199 	} else {
200 		size_t split = end - buffer->tail->data;
201 
202 		memcpy(buffer->tail->data, data, split);
203 		memcpy(buffer->data, data + split, length - split);
204 		buffer->tail = (struct packet *) &buffer->data[length - split];
205 	}
206 
207 	/* Finally, adjust buffer size and wake up userspace reader. */
208 
209 	atomic_add(sizeof(struct packet) + length, &buffer->size);
210 	wake_up_interruptible(&buffer->wait);
211 }
212 
213 static inline void
214 reg_write(struct pcilynx *lynx, int offset, u32 data)
215 {
216 	writel(data, lynx->registers + offset);
217 }
218 
219 static inline u32
220 reg_read(struct pcilynx *lynx, int offset)
221 {
222 	return readl(lynx->registers + offset);
223 }
224 
225 static inline void
226 reg_set_bits(struct pcilynx *lynx, int offset, u32 mask)
227 {
228 	reg_write(lynx, offset, (reg_read(lynx, offset) | mask));
229 }
230 
231 /*
232  * Maybe the pcl programs could be set up to just append data instead
233  * of using a whole packet.
234  */
235 static inline void
236 run_pcl(struct pcilynx *lynx, dma_addr_t pcl_bus,
237 			   int dmachan)
238 {
239 	reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, pcl_bus);
240 	reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20,
241 		  DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK);
242 }
243 
244 static int
245 set_phy_reg(struct pcilynx *lynx, int addr, int val)
246 {
247 	if (addr > 15) {
248 		dev_err(&lynx->pci_device->dev,
249 			"PHY register address %d out of range\n", addr);
250 		return -1;
251 	}
252 	if (val > 0xff) {
253 		dev_err(&lynx->pci_device->dev,
254 			"PHY register value %d out of range\n", val);
255 		return -1;
256 	}
257 	reg_write(lynx, LINK_PHY, LINK_PHY_WRITE |
258 		  LINK_PHY_ADDR(addr) | LINK_PHY_WDATA(val));
259 
260 	return 0;
261 }
262 
263 static int
264 nosy_open(struct inode *inode, struct file *file)
265 {
266 	int minor = iminor(inode);
267 	struct client *client;
268 	struct pcilynx *tmp, *lynx = NULL;
269 
270 	mutex_lock(&card_mutex);
271 	list_for_each_entry(tmp, &card_list, link)
272 		if (tmp->misc.minor == minor) {
273 			lynx = lynx_get(tmp);
274 			break;
275 		}
276 	mutex_unlock(&card_mutex);
277 	if (lynx == NULL)
278 		return -ENODEV;
279 
280 	client = kmalloc(sizeof *client, GFP_KERNEL);
281 	if (client == NULL)
282 		goto fail;
283 
284 	client->tcode_mask = ~0;
285 	client->lynx = lynx;
286 	INIT_LIST_HEAD(&client->link);
287 
288 	if (packet_buffer_init(&client->buffer, 128 * 1024) < 0)
289 		goto fail;
290 
291 	file->private_data = client;
292 
293 	return stream_open(inode, file);
294 fail:
295 	kfree(client);
296 	lynx_put(lynx);
297 
298 	return -ENOMEM;
299 }
300 
301 static int
302 nosy_release(struct inode *inode, struct file *file)
303 {
304 	struct client *client = file->private_data;
305 	struct pcilynx *lynx = client->lynx;
306 
307 	spin_lock_irq(&lynx->client_list_lock);
308 	list_del_init(&client->link);
309 	spin_unlock_irq(&lynx->client_list_lock);
310 
311 	packet_buffer_destroy(&client->buffer);
312 	kfree(client);
313 	lynx_put(lynx);
314 
315 	return 0;
316 }
317 
318 static __poll_t
319 nosy_poll(struct file *file, poll_table *pt)
320 {
321 	struct client *client = file->private_data;
322 	__poll_t ret = 0;
323 
324 	poll_wait(file, &client->buffer.wait, pt);
325 
326 	if (atomic_read(&client->buffer.size) > 0)
327 		ret = EPOLLIN | EPOLLRDNORM;
328 
329 	if (list_empty(&client->lynx->link))
330 		ret |= EPOLLHUP;
331 
332 	return ret;
333 }
334 
335 static ssize_t
336 nosy_read(struct file *file, char __user *buffer, size_t count, loff_t *offset)
337 {
338 	struct client *client = file->private_data;
339 
340 	return packet_buffer_get(client, buffer, count);
341 }
342 
343 static long
344 nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
345 {
346 	struct client *client = file->private_data;
347 	spinlock_t *client_list_lock = &client->lynx->client_list_lock;
348 	struct nosy_stats stats;
349 
350 	switch (cmd) {
351 	case NOSY_IOC_GET_STATS:
352 		spin_lock_irq(client_list_lock);
353 		stats.total_packet_count = client->buffer.total_packet_count;
354 		stats.lost_packet_count  = client->buffer.lost_packet_count;
355 		spin_unlock_irq(client_list_lock);
356 
357 		if (copy_to_user((void __user *) arg, &stats, sizeof stats))
358 			return -EFAULT;
359 		else
360 			return 0;
361 
362 	case NOSY_IOC_START:
363 		spin_lock_irq(client_list_lock);
364 		list_add_tail(&client->link, &client->lynx->client_list);
365 		spin_unlock_irq(client_list_lock);
366 
367 		return 0;
368 
369 	case NOSY_IOC_STOP:
370 		spin_lock_irq(client_list_lock);
371 		list_del_init(&client->link);
372 		spin_unlock_irq(client_list_lock);
373 
374 		return 0;
375 
376 	case NOSY_IOC_FILTER:
377 		spin_lock_irq(client_list_lock);
378 		client->tcode_mask = arg;
379 		spin_unlock_irq(client_list_lock);
380 
381 		return 0;
382 
383 	default:
384 		return -EINVAL;
385 		/* Flush buffer, configure filter. */
386 	}
387 }
388 
389 static const struct file_operations nosy_ops = {
390 	.owner =		THIS_MODULE,
391 	.read =			nosy_read,
392 	.unlocked_ioctl =	nosy_ioctl,
393 	.poll =			nosy_poll,
394 	.open =			nosy_open,
395 	.release =		nosy_release,
396 };
397 
398 #define PHY_PACKET_SIZE 12 /* 1 payload, 1 inverse, 1 ack = 3 quadlets */
399 
400 static void
401 packet_irq_handler(struct pcilynx *lynx)
402 {
403 	struct client *client;
404 	u32 tcode_mask, tcode, timestamp;
405 	size_t length;
406 	struct timespec64 ts64;
407 
408 	/* FIXME: Also report rcv_speed. */
409 
410 	length = __le32_to_cpu(lynx->rcv_pcl->pcl_status) & 0x00001fff;
411 	tcode  = __le32_to_cpu(lynx->rcv_buffer[1]) >> 4 & 0xf;
412 
413 	ktime_get_real_ts64(&ts64);
414 	timestamp = ts64.tv_nsec / NSEC_PER_USEC;
415 	lynx->rcv_buffer[0] = (__force __le32)timestamp;
416 
417 	if (length == PHY_PACKET_SIZE)
418 		tcode_mask = 1 << TCODE_PHY_PACKET;
419 	else
420 		tcode_mask = 1 << tcode;
421 
422 	spin_lock(&lynx->client_list_lock);
423 
424 	list_for_each_entry(client, &lynx->client_list, link)
425 		if (client->tcode_mask & tcode_mask)
426 			packet_buffer_put(&client->buffer,
427 					  lynx->rcv_buffer, length + 4);
428 
429 	spin_unlock(&lynx->client_list_lock);
430 }
431 
432 static void
433 bus_reset_irq_handler(struct pcilynx *lynx)
434 {
435 	struct client *client;
436 	struct timespec64 ts64;
437 	u32    timestamp;
438 
439 	ktime_get_real_ts64(&ts64);
440 	timestamp = ts64.tv_nsec / NSEC_PER_USEC;
441 
442 	spin_lock(&lynx->client_list_lock);
443 
444 	list_for_each_entry(client, &lynx->client_list, link)
445 		packet_buffer_put(&client->buffer, &timestamp, 4);
446 
447 	spin_unlock(&lynx->client_list_lock);
448 }
449 
450 static irqreturn_t
451 irq_handler(int irq, void *device)
452 {
453 	struct pcilynx *lynx = device;
454 	u32 pci_int_status;
455 
456 	pci_int_status = reg_read(lynx, PCI_INT_STATUS);
457 
458 	if (pci_int_status == ~0)
459 		/* Card was ejected. */
460 		return IRQ_NONE;
461 
462 	if ((pci_int_status & PCI_INT_INT_PEND) == 0)
463 		/* Not our interrupt, bail out quickly. */
464 		return IRQ_NONE;
465 
466 	if ((pci_int_status & PCI_INT_P1394_INT) != 0) {
467 		u32 link_int_status;
468 
469 		link_int_status = reg_read(lynx, LINK_INT_STATUS);
470 		reg_write(lynx, LINK_INT_STATUS, link_int_status);
471 
472 		if ((link_int_status & LINK_INT_PHY_BUSRESET) > 0)
473 			bus_reset_irq_handler(lynx);
474 	}
475 
476 	/* Clear the PCI_INT_STATUS register only after clearing the
477 	 * LINK_INT_STATUS register; otherwise the PCI_INT_P1394 will
478 	 * be set again immediately. */
479 
480 	reg_write(lynx, PCI_INT_STATUS, pci_int_status);
481 
482 	if ((pci_int_status & PCI_INT_DMA0_HLT) > 0) {
483 		packet_irq_handler(lynx);
484 		run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
485 	}
486 
487 	return IRQ_HANDLED;
488 }
489 
490 static void
491 remove_card(struct pci_dev *dev)
492 {
493 	struct pcilynx *lynx = pci_get_drvdata(dev);
494 	struct client *client;
495 
496 	mutex_lock(&card_mutex);
497 	list_del_init(&lynx->link);
498 	misc_deregister(&lynx->misc);
499 	mutex_unlock(&card_mutex);
500 
501 	reg_write(lynx, PCI_INT_ENABLE, 0);
502 	free_irq(lynx->pci_device->irq, lynx);
503 
504 	spin_lock_irq(&lynx->client_list_lock);
505 	list_for_each_entry(client, &lynx->client_list, link)
506 		wake_up_interruptible(&client->buffer.wait);
507 	spin_unlock_irq(&lynx->client_list_lock);
508 
509 	pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
510 			    lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
511 	pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
512 			    lynx->rcv_pcl, lynx->rcv_pcl_bus);
513 	pci_free_consistent(lynx->pci_device, PAGE_SIZE,
514 			    lynx->rcv_buffer, lynx->rcv_buffer_bus);
515 
516 	iounmap(lynx->registers);
517 	pci_disable_device(dev);
518 	lynx_put(lynx);
519 }
520 
521 #define RCV_BUFFER_SIZE (16 * 1024)
522 
523 static int
524 add_card(struct pci_dev *dev, const struct pci_device_id *unused)
525 {
526 	struct pcilynx *lynx;
527 	u32 p, end;
528 	int ret, i;
529 
530 	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
531 		dev_err(&dev->dev,
532 		    "DMA address limits not supported for PCILynx hardware\n");
533 		return -ENXIO;
534 	}
535 	if (pci_enable_device(dev)) {
536 		dev_err(&dev->dev, "Failed to enable PCILynx hardware\n");
537 		return -ENXIO;
538 	}
539 	pci_set_master(dev);
540 
541 	lynx = kzalloc(sizeof *lynx, GFP_KERNEL);
542 	if (lynx == NULL) {
543 		dev_err(&dev->dev, "Failed to allocate control structure\n");
544 		ret = -ENOMEM;
545 		goto fail_disable;
546 	}
547 	lynx->pci_device = dev;
548 	pci_set_drvdata(dev, lynx);
549 
550 	spin_lock_init(&lynx->client_list_lock);
551 	INIT_LIST_HEAD(&lynx->client_list);
552 	kref_init(&lynx->kref);
553 
554 	lynx->registers = ioremap_nocache(pci_resource_start(dev, 0),
555 					  PCILYNX_MAX_REGISTER);
556 	if (lynx->registers == NULL) {
557 		dev_err(&dev->dev, "Failed to map registers\n");
558 		ret = -ENOMEM;
559 		goto fail_deallocate_lynx;
560 	}
561 
562 	lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device,
563 				sizeof(struct pcl), &lynx->rcv_start_pcl_bus);
564 	lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device,
565 				sizeof(struct pcl), &lynx->rcv_pcl_bus);
566 	lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device,
567 				RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus);
568 	if (lynx->rcv_start_pcl == NULL ||
569 	    lynx->rcv_pcl == NULL ||
570 	    lynx->rcv_buffer == NULL) {
571 		dev_err(&dev->dev, "Failed to allocate receive buffer\n");
572 		ret = -ENOMEM;
573 		goto fail_deallocate_buffers;
574 	}
575 	lynx->rcv_start_pcl->next	= cpu_to_le32(lynx->rcv_pcl_bus);
576 	lynx->rcv_pcl->next		= cpu_to_le32(PCL_NEXT_INVALID);
577 	lynx->rcv_pcl->async_error_next	= cpu_to_le32(PCL_NEXT_INVALID);
578 
579 	lynx->rcv_pcl->buffer[0].control =
580 			cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2044);
581 	lynx->rcv_pcl->buffer[0].pointer =
582 			cpu_to_le32(lynx->rcv_buffer_bus + 4);
583 	p = lynx->rcv_buffer_bus + 2048;
584 	end = lynx->rcv_buffer_bus + RCV_BUFFER_SIZE;
585 	for (i = 1; p < end; i++, p += 2048) {
586 		lynx->rcv_pcl->buffer[i].control =
587 			cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2048);
588 		lynx->rcv_pcl->buffer[i].pointer = cpu_to_le32(p);
589 	}
590 	lynx->rcv_pcl->buffer[i - 1].control |= cpu_to_le32(PCL_LAST_BUFF);
591 
592 	reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
593 	/* Fix buggy cards with autoboot pin not tied low: */
594 	reg_write(lynx, DMA0_CHAN_CTRL, 0);
595 	reg_write(lynx, DMA_GLOBAL_REGISTER, 0x00 << 24);
596 
597 #if 0
598 	/* now, looking for PHY register set */
599 	if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
600 		lynx->phyic.reg_1394a = 1;
601 		PRINT(KERN_INFO, lynx->id,
602 		      "found 1394a conform PHY (using extended register set)");
603 		lynx->phyic.vendor = get_phy_vendorid(lynx);
604 		lynx->phyic.product = get_phy_productid(lynx);
605 	} else {
606 		lynx->phyic.reg_1394a = 0;
607 		PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
608 	}
609 #endif
610 
611 	/* Setup the general receive FIFO max size. */
612 	reg_write(lynx, FIFO_SIZES, 255);
613 
614 	reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
615 
616 	reg_write(lynx, LINK_INT_ENABLE,
617 		  LINK_INT_PHY_TIME_OUT | LINK_INT_PHY_REG_RCVD |
618 		  LINK_INT_PHY_BUSRESET | LINK_INT_IT_STUCK |
619 		  LINK_INT_AT_STUCK | LINK_INT_SNTRJ |
620 		  LINK_INT_TC_ERR | LINK_INT_GRF_OVER_FLOW |
621 		  LINK_INT_ITF_UNDER_FLOW | LINK_INT_ATF_UNDER_FLOW);
622 
623 	/* Disable the L flag in self ID packets. */
624 	set_phy_reg(lynx, 4, 0);
625 
626 	/* Put this baby into snoop mode */
627 	reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_SNOOP_ENABLE);
628 
629 	run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
630 
631 	if (request_irq(dev->irq, irq_handler, IRQF_SHARED,
632 			driver_name, lynx)) {
633 		dev_err(&dev->dev,
634 			"Failed to allocate shared interrupt %d\n", dev->irq);
635 		ret = -EIO;
636 		goto fail_deallocate_buffers;
637 	}
638 
639 	lynx->misc.parent = &dev->dev;
640 	lynx->misc.minor = MISC_DYNAMIC_MINOR;
641 	lynx->misc.name = "nosy";
642 	lynx->misc.fops = &nosy_ops;
643 
644 	mutex_lock(&card_mutex);
645 	ret = misc_register(&lynx->misc);
646 	if (ret) {
647 		dev_err(&dev->dev, "Failed to register misc char device\n");
648 		mutex_unlock(&card_mutex);
649 		goto fail_free_irq;
650 	}
651 	list_add_tail(&lynx->link, &card_list);
652 	mutex_unlock(&card_mutex);
653 
654 	dev_info(&dev->dev,
655 		 "Initialized PCILynx IEEE1394 card, irq=%d\n", dev->irq);
656 
657 	return 0;
658 
659 fail_free_irq:
660 	reg_write(lynx, PCI_INT_ENABLE, 0);
661 	free_irq(lynx->pci_device->irq, lynx);
662 
663 fail_deallocate_buffers:
664 	if (lynx->rcv_start_pcl)
665 		pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
666 				lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
667 	if (lynx->rcv_pcl)
668 		pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
669 				lynx->rcv_pcl, lynx->rcv_pcl_bus);
670 	if (lynx->rcv_buffer)
671 		pci_free_consistent(lynx->pci_device, PAGE_SIZE,
672 				lynx->rcv_buffer, lynx->rcv_buffer_bus);
673 	iounmap(lynx->registers);
674 
675 fail_deallocate_lynx:
676 	kfree(lynx);
677 
678 fail_disable:
679 	pci_disable_device(dev);
680 
681 	return ret;
682 }
683 
684 static struct pci_device_id pci_table[] = {
685 	{
686 		.vendor =    PCI_VENDOR_ID_TI,
687 		.device =    PCI_DEVICE_ID_TI_PCILYNX,
688 		.subvendor = PCI_ANY_ID,
689 		.subdevice = PCI_ANY_ID,
690 	},
691 	{ }	/* Terminating entry */
692 };
693 
694 MODULE_DEVICE_TABLE(pci, pci_table);
695 
696 static struct pci_driver lynx_pci_driver = {
697 	.name =		driver_name,
698 	.id_table =	pci_table,
699 	.probe =	add_card,
700 	.remove =	remove_card,
701 };
702 
703 module_pci_driver(lynx_pci_driver);
704 
705 MODULE_AUTHOR("Kristian Hoegsberg");
706 MODULE_DESCRIPTION("Snoop mode driver for TI pcilynx 1394 controllers");
707 MODULE_LICENSE("GPL");
708