1# SPDX-License-Identifier: GPL-2.0-only 2menu "IEEE 1394 (FireWire) support" 3 depends on PCI || COMPILE_TEST 4 # firewire-core does not depend on PCI but is 5 # not useful without PCI controller driver 6 7config FIREWIRE 8 tristate "FireWire driver stack" 9 select CRC_ITU_T 10 help 11 This is the new-generation IEEE 1394 (FireWire) driver stack 12 a.k.a. Juju, a new implementation designed for robustness and 13 simplicity. 14 See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration 15 for information about migration from the older Linux 1394 stack 16 to the new driver stack. 17 18 To compile this driver as a module, say M here: the module will be 19 called firewire-core. 20 21config FIREWIRE_OHCI 22 tristate "OHCI-1394 controllers" 23 depends on PCI && FIREWIRE && MMU 24 help 25 Enable this driver if you have a FireWire controller based 26 on the OHCI specification. For all practical purposes, this 27 is the only chipset in use, so say Y here. 28 29 To compile this driver as a module, say M here: The module will be 30 called firewire-ohci. 31 32config FIREWIRE_SBP2 33 tristate "Storage devices (SBP-2 protocol)" 34 depends on FIREWIRE && SCSI 35 help 36 This option enables you to use SBP-2 devices connected to a 37 FireWire bus. SBP-2 devices include storage devices like 38 harddisks and DVD drives, also some other FireWire devices 39 like scanners. 40 41 To compile this driver as a module, say M here: The module will be 42 called firewire-sbp2. 43 44 You should also enable support for disks, CD-ROMs, etc. in the SCSI 45 configuration section. 46 47config FIREWIRE_NET 48 tristate "IP networking over 1394" 49 depends on FIREWIRE && INET 50 help 51 This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity 52 with other implementations of RFC 2734/3146 as found on several 53 operating systems. Multicast support is currently limited. 54 55 To compile this driver as a module, say M here: The module will be 56 called firewire-net. 57 58config FIREWIRE_NOSY 59 tristate "Nosy - a FireWire traffic sniffer for PCILynx cards" 60 depends on PCI 61 help 62 Nosy is an IEEE 1394 packet sniffer that is used for protocol 63 analysis and in development of IEEE 1394 drivers, applications, 64 or firmwares. 65 66 This driver lets you use a Texas Instruments PCILynx 1394 to PCI 67 link layer controller TSB12LV21/A/B as a low-budget bus analyzer. 68 PCILynx is a nowadays very rare IEEE 1394 controller which is 69 not OHCI 1394 compliant. 70 71 The following cards are known to be based on PCILynx or PCILynx-2: 72 IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2 73 (PCI card), Newer Technology FireWire 2 Go (CardBus card), 74 Apple Power Mac G3 blue & white and G4 with PCI graphics 75 (onboard controller). 76 77 To compile this driver as a module, say M here: The module will be 78 called nosy. Source code of a userspace interface to nosy, called 79 nosy-dump, can be found in tools/firewire/ of the kernel sources. 80 81 If unsure, say N. 82 83endmenu 84