1 /*
2  * extcon-sm5502.c - Silicon Mitus SM5502 extcon drvier to support USB switches
3  *
4  * Copyright (c) 2014 Samsung Electronics Co., Ltd
5  * Author: Chanwoo Choi <cw00.choi@samsung.com>
6  *
7  * This program is free software; you can redistribute  it and/or modify it
8  * under  the terms of  the GNU General  Public License as published by the
9  * Free Software Foundation;  either version 2 of the  License, or (at your
10  * option) any later version.
11  */
12 
13 #include <linux/err.h>
14 #include <linux/i2c.h>
15 #include <linux/interrupt.h>
16 #include <linux/irqdomain.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/regmap.h>
21 #include <linux/slab.h>
22 #include <linux/extcon.h>
23 
24 #include "extcon-sm5502.h"
25 
26 #define	DELAY_MS_DEFAULT		17000	/* unit: millisecond */
27 
28 struct muic_irq {
29 	unsigned int irq;
30 	const char *name;
31 	unsigned int virq;
32 };
33 
34 struct reg_data {
35 	u8 reg;
36 	unsigned int val;
37 	bool invert;
38 };
39 
40 struct sm5502_muic_info {
41 	struct device *dev;
42 	struct extcon_dev *edev;
43 
44 	struct i2c_client *i2c;
45 	struct regmap *regmap;
46 
47 	struct regmap_irq_chip_data *irq_data;
48 	struct muic_irq *muic_irqs;
49 	unsigned int num_muic_irqs;
50 	int irq;
51 	bool irq_attach;
52 	bool irq_detach;
53 	struct work_struct irq_work;
54 
55 	struct reg_data *reg_data;
56 	unsigned int num_reg_data;
57 
58 	struct mutex mutex;
59 
60 	/*
61 	 * Use delayed workqueue to detect cable state and then
62 	 * notify cable state to notifiee/platform through uevent.
63 	 * After completing the booting of platform, the extcon provider
64 	 * driver should notify cable state to upper layer.
65 	 */
66 	struct delayed_work wq_detcable;
67 };
68 
69 /* Default value of SM5502 register to bring up MUIC device. */
70 static struct reg_data sm5502_reg_data[] = {
71 	{
72 		.reg = SM5502_REG_CONTROL,
73 		.val = SM5502_REG_CONTROL_MASK_INT_MASK,
74 		.invert = false,
75 	}, {
76 		.reg = SM5502_REG_INTMASK1,
77 		.val = SM5502_REG_INTM1_KP_MASK
78 			| SM5502_REG_INTM1_LKP_MASK
79 			| SM5502_REG_INTM1_LKR_MASK,
80 		.invert = true,
81 	}, {
82 		.reg = SM5502_REG_INTMASK2,
83 		.val = SM5502_REG_INTM2_VBUS_DET_MASK
84 			| SM5502_REG_INTM2_REV_ACCE_MASK
85 			| SM5502_REG_INTM2_ADC_CHG_MASK
86 			| SM5502_REG_INTM2_STUCK_KEY_MASK
87 			| SM5502_REG_INTM2_STUCK_KEY_RCV_MASK
88 			| SM5502_REG_INTM2_MHL_MASK,
89 		.invert = true,
90 	},
91 	{ }
92 };
93 
94 /* List of detectable cables */
95 static const unsigned int sm5502_extcon_cable[] = {
96 	EXTCON_USB,
97 	EXTCON_USB_HOST,
98 	EXTCON_CHG_USB_SDP,
99 	EXTCON_CHG_USB_DCP,
100 	EXTCON_NONE,
101 };
102 
103 /* Define supported accessory type */
104 enum sm5502_muic_acc_type {
105 	SM5502_MUIC_ADC_GROUND = 0x0,
106 	SM5502_MUIC_ADC_SEND_END_BUTTON,
107 	SM5502_MUIC_ADC_REMOTE_S1_BUTTON,
108 	SM5502_MUIC_ADC_REMOTE_S2_BUTTON,
109 	SM5502_MUIC_ADC_REMOTE_S3_BUTTON,
110 	SM5502_MUIC_ADC_REMOTE_S4_BUTTON,
111 	SM5502_MUIC_ADC_REMOTE_S5_BUTTON,
112 	SM5502_MUIC_ADC_REMOTE_S6_BUTTON,
113 	SM5502_MUIC_ADC_REMOTE_S7_BUTTON,
114 	SM5502_MUIC_ADC_REMOTE_S8_BUTTON,
115 	SM5502_MUIC_ADC_REMOTE_S9_BUTTON,
116 	SM5502_MUIC_ADC_REMOTE_S10_BUTTON,
117 	SM5502_MUIC_ADC_REMOTE_S11_BUTTON,
118 	SM5502_MUIC_ADC_REMOTE_S12_BUTTON,
119 	SM5502_MUIC_ADC_RESERVED_ACC_1,
120 	SM5502_MUIC_ADC_RESERVED_ACC_2,
121 	SM5502_MUIC_ADC_RESERVED_ACC_3,
122 	SM5502_MUIC_ADC_RESERVED_ACC_4,
123 	SM5502_MUIC_ADC_RESERVED_ACC_5,
124 	SM5502_MUIC_ADC_AUDIO_TYPE2,
125 	SM5502_MUIC_ADC_PHONE_POWERED_DEV,
126 	SM5502_MUIC_ADC_TTY_CONVERTER,
127 	SM5502_MUIC_ADC_UART_CABLE,
128 	SM5502_MUIC_ADC_TYPE1_CHARGER,
129 	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB,
130 	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB,
131 	SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE,
132 	SM5502_MUIC_ADC_TYPE2_CHARGER,
133 	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART,
134 	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART,
135 	SM5502_MUIC_ADC_AUDIO_TYPE1,
136 	SM5502_MUIC_ADC_OPEN = 0x1f,
137 
138 	/*
139 	 * The below accessories have same ADC value (0x1f or 0x1e).
140 	 * So, Device type1 is used to separate specific accessory.
141 	 */
142 							/* |---------|--ADC| */
143 							/* |    [7:5]|[4:0]| */
144 	SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e,	/* |      001|11110| */
145 	SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e,	/* |      010|11110| */
146 							/* |Dev Type1|--ADC| */
147 	SM5502_MUIC_ADC_OPEN_USB = 0x5f,		/* |      010|11111| */
148 	SM5502_MUIC_ADC_OPEN_TA = 0xdf,			/* |      110|11111| */
149 	SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff,		/* |      111|11111| */
150 };
151 
152 /* List of supported interrupt for SM5502 */
153 static struct muic_irq sm5502_muic_irqs[] = {
154 	{ SM5502_IRQ_INT1_ATTACH,	"muic-attach" },
155 	{ SM5502_IRQ_INT1_DETACH,	"muic-detach" },
156 	{ SM5502_IRQ_INT1_KP,		"muic-kp" },
157 	{ SM5502_IRQ_INT1_LKP,		"muic-lkp" },
158 	{ SM5502_IRQ_INT1_LKR,		"muic-lkr" },
159 	{ SM5502_IRQ_INT1_OVP_EVENT,	"muic-ovp-event" },
160 	{ SM5502_IRQ_INT1_OCP_EVENT,	"muic-ocp-event" },
161 	{ SM5502_IRQ_INT1_OVP_OCP_DIS,	"muic-ovp-ocp-dis" },
162 	{ SM5502_IRQ_INT2_VBUS_DET,	"muic-vbus-det" },
163 	{ SM5502_IRQ_INT2_REV_ACCE,	"muic-rev-acce" },
164 	{ SM5502_IRQ_INT2_ADC_CHG,	"muic-adc-chg" },
165 	{ SM5502_IRQ_INT2_STUCK_KEY,	"muic-stuck-key" },
166 	{ SM5502_IRQ_INT2_STUCK_KEY_RCV, "muic-stuck-key-rcv" },
167 	{ SM5502_IRQ_INT2_MHL,		"muic-mhl" },
168 };
169 
170 /* Define interrupt list of SM5502 to register regmap_irq */
171 static const struct regmap_irq sm5502_irqs[] = {
172 	/* INT1 interrupts */
173 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_ATTACH_MASK, },
174 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_DETACH_MASK, },
175 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_KP_MASK, },
176 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKP_MASK, },
177 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKR_MASK, },
178 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_EVENT_MASK, },
179 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OCP_EVENT_MASK, },
180 	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_OCP_DIS_MASK, },
181 
182 	/* INT2 interrupts */
183 	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_VBUS_DET_MASK,},
184 	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_REV_ACCE_MASK, },
185 	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_ADC_CHG_MASK, },
186 	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_MASK, },
187 	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK, },
188 	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_MHL_MASK, },
189 };
190 
191 static const struct regmap_irq_chip sm5502_muic_irq_chip = {
192 	.name			= "sm5502",
193 	.status_base		= SM5502_REG_INT1,
194 	.mask_base		= SM5502_REG_INTMASK1,
195 	.mask_invert		= false,
196 	.num_regs		= 2,
197 	.irqs			= sm5502_irqs,
198 	.num_irqs		= ARRAY_SIZE(sm5502_irqs),
199 };
200 
201 /* Define regmap configuration of SM5502 for I2C communication  */
202 static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
203 {
204 	switch (reg) {
205 	case SM5502_REG_INTMASK1:
206 	case SM5502_REG_INTMASK2:
207 		return true;
208 	default:
209 		break;
210 	}
211 	return false;
212 }
213 
214 static const struct regmap_config sm5502_muic_regmap_config = {
215 	.reg_bits	= 8,
216 	.val_bits	= 8,
217 	.volatile_reg	= sm5502_muic_volatile_reg,
218 	.max_register	= SM5502_REG_END,
219 };
220 
221 /* Change DM_CON/DP_CON/VBUSIN switch according to cable type */
222 static int sm5502_muic_set_path(struct sm5502_muic_info *info,
223 				unsigned int con_sw, unsigned int vbus_sw,
224 				bool attached)
225 {
226 	int ret;
227 
228 	if (!attached) {
229 		con_sw	= DM_DP_SWITCH_OPEN;
230 		vbus_sw	= VBUSIN_SWITCH_OPEN;
231 	}
232 
233 	switch (con_sw) {
234 	case DM_DP_SWITCH_OPEN:
235 	case DM_DP_SWITCH_USB:
236 	case DM_DP_SWITCH_AUDIO:
237 	case DM_DP_SWITCH_UART:
238 		ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
239 					 SM5502_REG_MANUAL_SW1_DP_MASK |
240 					 SM5502_REG_MANUAL_SW1_DM_MASK,
241 					 con_sw);
242 		if (ret < 0) {
243 			dev_err(info->dev,
244 				"cannot update DM_CON/DP_CON switch\n");
245 			return ret;
246 		}
247 		break;
248 	default:
249 		dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n",
250 				con_sw);
251 		return -EINVAL;
252 	};
253 
254 	switch (vbus_sw) {
255 	case VBUSIN_SWITCH_OPEN:
256 	case VBUSIN_SWITCH_VBUSOUT:
257 	case VBUSIN_SWITCH_MIC:
258 	case VBUSIN_SWITCH_VBUSOUT_WITH_USB:
259 		ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
260 					 SM5502_REG_MANUAL_SW1_VBUSIN_MASK,
261 					 vbus_sw);
262 		if (ret < 0) {
263 			dev_err(info->dev,
264 				"cannot update VBUSIN switch\n");
265 			return ret;
266 		}
267 		break;
268 	default:
269 		dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw);
270 		return -EINVAL;
271 	};
272 
273 	return 0;
274 }
275 
276 /* Return cable type of attached or detached accessories */
277 static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
278 {
279 	unsigned int cable_type = -1, adc, dev_type1;
280 	int ret;
281 
282 	/* Read ADC value according to external cable or button */
283 	ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc);
284 	if (ret) {
285 		dev_err(info->dev, "failed to read ADC register\n");
286 		return ret;
287 	}
288 
289 	/*
290 	 * If ADC is SM5502_MUIC_ADC_GROUND(0x0), external cable hasn't
291 	 * connected with to MUIC device.
292 	 */
293 	cable_type = adc & SM5502_REG_ADC_MASK;
294 	if (cable_type == SM5502_MUIC_ADC_GROUND)
295 		return SM5502_MUIC_ADC_GROUND;
296 
297 	switch (cable_type) {
298 	case SM5502_MUIC_ADC_GROUND:
299 	case SM5502_MUIC_ADC_SEND_END_BUTTON:
300 	case SM5502_MUIC_ADC_REMOTE_S1_BUTTON:
301 	case SM5502_MUIC_ADC_REMOTE_S2_BUTTON:
302 	case SM5502_MUIC_ADC_REMOTE_S3_BUTTON:
303 	case SM5502_MUIC_ADC_REMOTE_S4_BUTTON:
304 	case SM5502_MUIC_ADC_REMOTE_S5_BUTTON:
305 	case SM5502_MUIC_ADC_REMOTE_S6_BUTTON:
306 	case SM5502_MUIC_ADC_REMOTE_S7_BUTTON:
307 	case SM5502_MUIC_ADC_REMOTE_S8_BUTTON:
308 	case SM5502_MUIC_ADC_REMOTE_S9_BUTTON:
309 	case SM5502_MUIC_ADC_REMOTE_S10_BUTTON:
310 	case SM5502_MUIC_ADC_REMOTE_S11_BUTTON:
311 	case SM5502_MUIC_ADC_REMOTE_S12_BUTTON:
312 	case SM5502_MUIC_ADC_RESERVED_ACC_1:
313 	case SM5502_MUIC_ADC_RESERVED_ACC_2:
314 	case SM5502_MUIC_ADC_RESERVED_ACC_3:
315 	case SM5502_MUIC_ADC_RESERVED_ACC_4:
316 	case SM5502_MUIC_ADC_RESERVED_ACC_5:
317 	case SM5502_MUIC_ADC_AUDIO_TYPE2:
318 	case SM5502_MUIC_ADC_PHONE_POWERED_DEV:
319 	case SM5502_MUIC_ADC_TTY_CONVERTER:
320 	case SM5502_MUIC_ADC_UART_CABLE:
321 	case SM5502_MUIC_ADC_TYPE1_CHARGER:
322 	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
323 	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
324 	case SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE:
325 	case SM5502_MUIC_ADC_TYPE2_CHARGER:
326 	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
327 	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
328 		break;
329 	case SM5502_MUIC_ADC_AUDIO_TYPE1:
330 		/*
331 		 * Check whether cable type is
332 		 * SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE
333 		 * or SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END
334 		 * by using Button event.
335 		 */
336 		break;
337 	case SM5502_MUIC_ADC_OPEN:
338 		ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
339 				  &dev_type1);
340 		if (ret) {
341 			dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
342 			return ret;
343 		}
344 
345 		switch (dev_type1) {
346 		case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
347 			cable_type = SM5502_MUIC_ADC_OPEN_USB;
348 			break;
349 		case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
350 			cable_type = SM5502_MUIC_ADC_OPEN_TA;
351 			break;
352 		case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
353 			cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
354 			break;
355 		default:
356 			dev_dbg(info->dev,
357 				"cannot identify the cable type: adc(0x%x)\n",
358 				adc);
359 			return -EINVAL;
360 		};
361 		break;
362 	default:
363 		dev_err(info->dev,
364 			"failed to identify the cable type: adc(0x%x)\n", adc);
365 		return -EINVAL;
366 	};
367 
368 	return cable_type;
369 }
370 
371 static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
372 				     bool attached)
373 {
374 	static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
375 	unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
376 	unsigned int con_sw = DM_DP_SWITCH_OPEN;
377 	unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
378 	unsigned int id;
379 	int ret;
380 
381 	/* Get the type of attached or detached cable */
382 	if (attached)
383 		cable_type = sm5502_muic_get_cable_type(info);
384 	else
385 		cable_type = prev_cable_type;
386 	prev_cable_type = cable_type;
387 
388 	switch (cable_type) {
389 	case SM5502_MUIC_ADC_OPEN_USB:
390 		id	= EXTCON_USB;
391 		con_sw	= DM_DP_SWITCH_USB;
392 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT_WITH_USB;
393 		break;
394 	case SM5502_MUIC_ADC_OPEN_TA:
395 		id	= EXTCON_CHG_USB_DCP;
396 		con_sw	= DM_DP_SWITCH_OPEN;
397 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT;
398 		break;
399 	case SM5502_MUIC_ADC_OPEN_USB_OTG:
400 		id	= EXTCON_USB_HOST;
401 		con_sw	= DM_DP_SWITCH_USB;
402 		vbus_sw	= VBUSIN_SWITCH_OPEN;
403 		break;
404 	default:
405 		dev_dbg(info->dev,
406 			"cannot handle this cable_type (0x%x)\n", cable_type);
407 		return 0;
408 	};
409 
410 	/* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */
411 	ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached);
412 	if (ret < 0)
413 		return ret;
414 
415 	/* Change the state of external accessory */
416 	extcon_set_state_sync(info->edev, id, attached);
417 	if (id == EXTCON_USB)
418 		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
419 					attached);
420 
421 	return 0;
422 }
423 
424 static void sm5502_muic_irq_work(struct work_struct *work)
425 {
426 	struct sm5502_muic_info *info = container_of(work,
427 			struct sm5502_muic_info, irq_work);
428 	int ret = 0;
429 
430 	if (!info->edev)
431 		return;
432 
433 	mutex_lock(&info->mutex);
434 
435 	/* Detect attached or detached cables */
436 	if (info->irq_attach) {
437 		ret = sm5502_muic_cable_handler(info, true);
438 		info->irq_attach = false;
439 	}
440 	if (info->irq_detach) {
441 		ret = sm5502_muic_cable_handler(info, false);
442 		info->irq_detach = false;
443 	}
444 
445 	if (ret < 0)
446 		dev_err(info->dev, "failed to handle MUIC interrupt\n");
447 
448 	mutex_unlock(&info->mutex);
449 }
450 
451 /*
452  * Sets irq_attach or irq_detach in sm5502_muic_info and returns 0.
453  * Returns -ESRCH if irq_type does not match registered IRQ for this dev type.
454  */
455 static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
456 {
457 	switch (irq_type) {
458 	case SM5502_IRQ_INT1_ATTACH:
459 		info->irq_attach = true;
460 		break;
461 	case SM5502_IRQ_INT1_DETACH:
462 		info->irq_detach = true;
463 		break;
464 	case SM5502_IRQ_INT1_KP:
465 	case SM5502_IRQ_INT1_LKP:
466 	case SM5502_IRQ_INT1_LKR:
467 	case SM5502_IRQ_INT1_OVP_EVENT:
468 	case SM5502_IRQ_INT1_OCP_EVENT:
469 	case SM5502_IRQ_INT1_OVP_OCP_DIS:
470 	case SM5502_IRQ_INT2_VBUS_DET:
471 	case SM5502_IRQ_INT2_REV_ACCE:
472 	case SM5502_IRQ_INT2_ADC_CHG:
473 	case SM5502_IRQ_INT2_STUCK_KEY:
474 	case SM5502_IRQ_INT2_STUCK_KEY_RCV:
475 	case SM5502_IRQ_INT2_MHL:
476 	default:
477 		break;
478 	}
479 
480 	return 0;
481 }
482 
483 static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
484 {
485 	struct sm5502_muic_info *info = data;
486 	int i, irq_type = -1, ret;
487 
488 	for (i = 0; i < info->num_muic_irqs; i++)
489 		if (irq == info->muic_irqs[i].virq)
490 			irq_type = info->muic_irqs[i].irq;
491 
492 	ret = sm5502_parse_irq(info, irq_type);
493 	if (ret < 0) {
494 		dev_warn(info->dev, "cannot handle is interrupt:%d\n",
495 				    irq_type);
496 		return IRQ_HANDLED;
497 	}
498 	schedule_work(&info->irq_work);
499 
500 	return IRQ_HANDLED;
501 }
502 
503 static void sm5502_muic_detect_cable_wq(struct work_struct *work)
504 {
505 	struct sm5502_muic_info *info = container_of(to_delayed_work(work),
506 				struct sm5502_muic_info, wq_detcable);
507 	int ret;
508 
509 	/* Notify the state of connector cable or not  */
510 	ret = sm5502_muic_cable_handler(info, true);
511 	if (ret < 0)
512 		dev_warn(info->dev, "failed to detect cable state\n");
513 }
514 
515 static void sm5502_init_dev_type(struct sm5502_muic_info *info)
516 {
517 	unsigned int reg_data, vendor_id, version_id;
518 	int i, ret;
519 
520 	/* To test I2C, Print version_id and vendor_id of SM5502 */
521 	ret = regmap_read(info->regmap, SM5502_REG_DEVICE_ID, &reg_data);
522 	if (ret) {
523 		dev_err(info->dev,
524 			"failed to read DEVICE_ID register: %d\n", ret);
525 		return;
526 	}
527 
528 	vendor_id = ((reg_data & SM5502_REG_DEVICE_ID_VENDOR_MASK) >>
529 				SM5502_REG_DEVICE_ID_VENDOR_SHIFT);
530 	version_id = ((reg_data & SM5502_REG_DEVICE_ID_VERSION_MASK) >>
531 				SM5502_REG_DEVICE_ID_VERSION_SHIFT);
532 
533 	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
534 			    version_id, vendor_id);
535 
536 	/* Initiazle the register of SM5502 device to bring-up */
537 	for (i = 0; i < info->num_reg_data; i++) {
538 		unsigned int val = 0;
539 
540 		if (!info->reg_data[i].invert)
541 			val |= ~info->reg_data[i].val;
542 		else
543 			val = info->reg_data[i].val;
544 		regmap_write(info->regmap, info->reg_data[i].reg, val);
545 	}
546 }
547 
548 static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
549 				 const struct i2c_device_id *id)
550 {
551 	struct device_node *np = i2c->dev.of_node;
552 	struct sm5502_muic_info *info;
553 	int i, ret, irq_flags;
554 
555 	if (!np)
556 		return -EINVAL;
557 
558 	info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
559 	if (!info)
560 		return -ENOMEM;
561 	i2c_set_clientdata(i2c, info);
562 
563 	info->dev = &i2c->dev;
564 	info->i2c = i2c;
565 	info->irq = i2c->irq;
566 	info->muic_irqs = sm5502_muic_irqs;
567 	info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
568 	info->reg_data = sm5502_reg_data;
569 	info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
570 
571 	mutex_init(&info->mutex);
572 
573 	INIT_WORK(&info->irq_work, sm5502_muic_irq_work);
574 
575 	info->regmap = devm_regmap_init_i2c(i2c, &sm5502_muic_regmap_config);
576 	if (IS_ERR(info->regmap)) {
577 		ret = PTR_ERR(info->regmap);
578 		dev_err(info->dev, "failed to allocate register map: %d\n",
579 				   ret);
580 		return ret;
581 	}
582 
583 	/* Support irq domain for SM5502 MUIC device */
584 	irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
585 	ret = regmap_add_irq_chip(info->regmap, info->irq, irq_flags, 0,
586 				  &sm5502_muic_irq_chip, &info->irq_data);
587 	if (ret != 0) {
588 		dev_err(info->dev, "failed to request IRQ %d: %d\n",
589 				    info->irq, ret);
590 		return ret;
591 	}
592 
593 	for (i = 0; i < info->num_muic_irqs; i++) {
594 		struct muic_irq *muic_irq = &info->muic_irqs[i];
595 		int virq = 0;
596 
597 		virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
598 		if (virq <= 0)
599 			return -EINVAL;
600 		muic_irq->virq = virq;
601 
602 		ret = devm_request_threaded_irq(info->dev, virq, NULL,
603 						sm5502_muic_irq_handler,
604 						IRQF_NO_SUSPEND,
605 						muic_irq->name, info);
606 		if (ret) {
607 			dev_err(info->dev,
608 				"failed: irq request (IRQ: %d, error :%d)\n",
609 				muic_irq->irq, ret);
610 			return ret;
611 		}
612 	}
613 
614 	/* Allocate extcon device */
615 	info->edev = devm_extcon_dev_allocate(info->dev, sm5502_extcon_cable);
616 	if (IS_ERR(info->edev)) {
617 		dev_err(info->dev, "failed to allocate memory for extcon\n");
618 		return -ENOMEM;
619 	}
620 
621 	/* Register extcon device */
622 	ret = devm_extcon_dev_register(info->dev, info->edev);
623 	if (ret) {
624 		dev_err(info->dev, "failed to register extcon device\n");
625 		return ret;
626 	}
627 
628 	/*
629 	 * Detect accessory after completing the initialization of platform
630 	 *
631 	 * - Use delayed workqueue to detect cable state and then
632 	 * notify cable state to notifiee/platform through uevent.
633 	 * After completing the booting of platform, the extcon provider
634 	 * driver should notify cable state to upper layer.
635 	 */
636 	INIT_DELAYED_WORK(&info->wq_detcable, sm5502_muic_detect_cable_wq);
637 	queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
638 			msecs_to_jiffies(DELAY_MS_DEFAULT));
639 
640 	/* Initialize SM5502 device and print vendor id and version id */
641 	sm5502_init_dev_type(info);
642 
643 	return 0;
644 }
645 
646 static int sm5502_muic_i2c_remove(struct i2c_client *i2c)
647 {
648 	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
649 
650 	regmap_del_irq_chip(info->irq, info->irq_data);
651 
652 	return 0;
653 }
654 
655 static const struct of_device_id sm5502_dt_match[] = {
656 	{ .compatible = "siliconmitus,sm5502-muic" },
657 	{ },
658 };
659 MODULE_DEVICE_TABLE(of, sm5502_dt_match);
660 
661 #ifdef CONFIG_PM_SLEEP
662 static int sm5502_muic_suspend(struct device *dev)
663 {
664 	struct i2c_client *i2c = to_i2c_client(dev);
665 	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
666 
667 	enable_irq_wake(info->irq);
668 
669 	return 0;
670 }
671 
672 static int sm5502_muic_resume(struct device *dev)
673 {
674 	struct i2c_client *i2c = to_i2c_client(dev);
675 	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
676 
677 	disable_irq_wake(info->irq);
678 
679 	return 0;
680 }
681 #endif
682 
683 static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
684 			 sm5502_muic_suspend, sm5502_muic_resume);
685 
686 static const struct i2c_device_id sm5502_i2c_id[] = {
687 	{ "sm5502", TYPE_SM5502 },
688 	{ }
689 };
690 MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
691 
692 static struct i2c_driver sm5502_muic_i2c_driver = {
693 	.driver		= {
694 		.name	= "sm5502",
695 		.pm	= &sm5502_muic_pm_ops,
696 		.of_match_table = sm5502_dt_match,
697 	},
698 	.probe	= sm5022_muic_i2c_probe,
699 	.remove	= sm5502_muic_i2c_remove,
700 	.id_table = sm5502_i2c_id,
701 };
702 
703 static int __init sm5502_muic_i2c_init(void)
704 {
705 	return i2c_add_driver(&sm5502_muic_i2c_driver);
706 }
707 subsys_initcall(sm5502_muic_i2c_init);
708 
709 MODULE_DESCRIPTION("Silicon Mitus SM5502 Extcon driver");
710 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
711 MODULE_LICENSE("GPL");
712