1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // extcon-max8997.c - MAX8997 extcon driver to support MAX8997 MUIC 4 // 5 // Copyright (C) 2012 Samsung Electronics 6 // Donggeun Kim <dg77.kim@samsung.com> 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/i2c.h> 11 #include <linux/slab.h> 12 #include <linux/interrupt.h> 13 #include <linux/err.h> 14 #include <linux/platform_device.h> 15 #include <linux/kobject.h> 16 #include <linux/mfd/max8997.h> 17 #include <linux/mfd/max8997-private.h> 18 #include <linux/extcon-provider.h> 19 #include <linux/irqdomain.h> 20 21 #define DEV_NAME "max8997-muic" 22 #define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ 23 24 enum max8997_muic_adc_debounce_time { 25 ADC_DEBOUNCE_TIME_0_5MS = 0, /* 0.5ms */ 26 ADC_DEBOUNCE_TIME_10MS, /* 10ms */ 27 ADC_DEBOUNCE_TIME_25MS, /* 25ms */ 28 ADC_DEBOUNCE_TIME_38_62MS, /* 38.62ms */ 29 }; 30 31 struct max8997_muic_irq { 32 unsigned int irq; 33 const char *name; 34 unsigned int virq; 35 }; 36 37 static struct max8997_muic_irq muic_irqs[] = { 38 { MAX8997_MUICIRQ_ADCError, "muic-ADCERROR" }, 39 { MAX8997_MUICIRQ_ADCLow, "muic-ADCLOW" }, 40 { MAX8997_MUICIRQ_ADC, "muic-ADC" }, 41 { MAX8997_MUICIRQ_VBVolt, "muic-VBVOLT" }, 42 { MAX8997_MUICIRQ_DBChg, "muic-DBCHG" }, 43 { MAX8997_MUICIRQ_DCDTmr, "muic-DCDTMR" }, 44 { MAX8997_MUICIRQ_ChgDetRun, "muic-CHGDETRUN" }, 45 { MAX8997_MUICIRQ_ChgTyp, "muic-CHGTYP" }, 46 { MAX8997_MUICIRQ_OVP, "muic-OVP" }, 47 }; 48 49 /* Define supported cable type */ 50 enum max8997_muic_acc_type { 51 MAX8997_MUIC_ADC_GROUND = 0x0, 52 MAX8997_MUIC_ADC_MHL, /* MHL*/ 53 MAX8997_MUIC_ADC_REMOTE_S1_BUTTON, 54 MAX8997_MUIC_ADC_REMOTE_S2_BUTTON, 55 MAX8997_MUIC_ADC_REMOTE_S3_BUTTON, 56 MAX8997_MUIC_ADC_REMOTE_S4_BUTTON, 57 MAX8997_MUIC_ADC_REMOTE_S5_BUTTON, 58 MAX8997_MUIC_ADC_REMOTE_S6_BUTTON, 59 MAX8997_MUIC_ADC_REMOTE_S7_BUTTON, 60 MAX8997_MUIC_ADC_REMOTE_S8_BUTTON, 61 MAX8997_MUIC_ADC_REMOTE_S9_BUTTON, 62 MAX8997_MUIC_ADC_REMOTE_S10_BUTTON, 63 MAX8997_MUIC_ADC_REMOTE_S11_BUTTON, 64 MAX8997_MUIC_ADC_REMOTE_S12_BUTTON, 65 MAX8997_MUIC_ADC_RESERVED_ACC_1, 66 MAX8997_MUIC_ADC_RESERVED_ACC_2, 67 MAX8997_MUIC_ADC_RESERVED_ACC_3, 68 MAX8997_MUIC_ADC_RESERVED_ACC_4, 69 MAX8997_MUIC_ADC_RESERVED_ACC_5, 70 MAX8997_MUIC_ADC_CEA936_AUDIO, 71 MAX8997_MUIC_ADC_PHONE_POWERED_DEV, 72 MAX8997_MUIC_ADC_TTY_CONVERTER, 73 MAX8997_MUIC_ADC_UART_CABLE, 74 MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG, 75 MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF, /* JIG-USB-OFF */ 76 MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON, /* JIG-USB-ON */ 77 MAX8997_MUIC_ADC_AV_CABLE_NOLOAD, /* DESKDOCK */ 78 MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG, 79 MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF, /* JIG-UART */ 80 MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON, /* CARDOCK */ 81 MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE, 82 MAX8997_MUIC_ADC_OPEN, /* OPEN */ 83 }; 84 85 enum max8997_muic_cable_group { 86 MAX8997_CABLE_GROUP_ADC = 0, 87 MAX8997_CABLE_GROUP_ADC_GND, 88 MAX8997_CABLE_GROUP_CHG, 89 MAX8997_CABLE_GROUP_VBVOLT, 90 }; 91 92 enum max8997_muic_usb_type { 93 MAX8997_USB_HOST, 94 MAX8997_USB_DEVICE, 95 }; 96 97 enum max8997_muic_charger_type { 98 MAX8997_CHARGER_TYPE_NONE = 0, 99 MAX8997_CHARGER_TYPE_USB, 100 MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT, 101 MAX8997_CHARGER_TYPE_DEDICATED_CHG, 102 MAX8997_CHARGER_TYPE_500MA, 103 MAX8997_CHARGER_TYPE_1A, 104 MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7, 105 }; 106 107 struct max8997_muic_info { 108 struct device *dev; 109 struct i2c_client *muic; 110 struct extcon_dev *edev; 111 int prev_cable_type; 112 int prev_chg_type; 113 u8 status[2]; 114 115 int irq; 116 struct work_struct irq_work; 117 struct mutex mutex; 118 119 struct max8997_muic_platform_data *muic_pdata; 120 enum max8997_muic_charger_type pre_charger_type; 121 122 /* 123 * Use delayed workqueue to detect cable state and then 124 * notify cable state to notifiee/platform through uevent. 125 * After completing the booting of platform, the extcon provider 126 * driver should notify cable state to upper layer. 127 */ 128 struct delayed_work wq_detcable; 129 130 /* 131 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB 132 * h/w path of COMP2/COMN1 on CONTROL1 register. 133 */ 134 int path_usb; 135 int path_uart; 136 }; 137 138 static const unsigned int max8997_extcon_cable[] = { 139 EXTCON_USB, 140 EXTCON_USB_HOST, 141 EXTCON_CHG_USB_SDP, 142 EXTCON_CHG_USB_DCP, 143 EXTCON_CHG_USB_FAST, 144 EXTCON_CHG_USB_SLOW, 145 EXTCON_CHG_USB_CDP, 146 EXTCON_DISP_MHL, 147 EXTCON_DOCK, 148 EXTCON_JIG, 149 EXTCON_NONE, 150 }; 151 152 /* 153 * max8997_muic_set_debounce_time - Set the debounce time of ADC 154 * @info: the instance including private data of max8997 MUIC 155 * @time: the debounce time of ADC 156 */ 157 static int max8997_muic_set_debounce_time(struct max8997_muic_info *info, 158 enum max8997_muic_adc_debounce_time time) 159 { 160 int ret; 161 162 switch (time) { 163 case ADC_DEBOUNCE_TIME_0_5MS: 164 case ADC_DEBOUNCE_TIME_10MS: 165 case ADC_DEBOUNCE_TIME_25MS: 166 case ADC_DEBOUNCE_TIME_38_62MS: 167 ret = max8997_update_reg(info->muic, 168 MAX8997_MUIC_REG_CONTROL3, 169 time << CONTROL3_ADCDBSET_SHIFT, 170 CONTROL3_ADCDBSET_MASK); 171 if (ret) { 172 dev_err(info->dev, "failed to set ADC debounce time\n"); 173 return ret; 174 } 175 break; 176 default: 177 dev_err(info->dev, "invalid ADC debounce time\n"); 178 return -EINVAL; 179 } 180 181 return 0; 182 }; 183 184 /* 185 * max8997_muic_set_path - Set hardware line according to attached cable 186 * @info: the instance including private data of max8997 MUIC 187 * @value: the path according to attached cable 188 * @attached: the state of cable (true:attached, false:detached) 189 * 190 * The max8997 MUIC device share outside H/W line among a varity of cables, 191 * so this function set internal path of H/W line according to the type of 192 * attached cable. 193 */ 194 static int max8997_muic_set_path(struct max8997_muic_info *info, 195 u8 val, bool attached) 196 { 197 int ret; 198 u8 ctrl1, ctrl2 = 0; 199 200 if (attached) 201 ctrl1 = val; 202 else 203 ctrl1 = CONTROL1_SW_OPEN; 204 205 ret = max8997_update_reg(info->muic, 206 MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK); 207 if (ret < 0) { 208 dev_err(info->dev, "failed to update MUIC register\n"); 209 return ret; 210 } 211 212 if (attached) 213 ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ 214 else 215 ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ 216 217 ret = max8997_update_reg(info->muic, 218 MAX8997_MUIC_REG_CONTROL2, ctrl2, 219 CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); 220 if (ret < 0) { 221 dev_err(info->dev, "failed to update MUIC register\n"); 222 return ret; 223 } 224 225 dev_info(info->dev, 226 "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", 227 ctrl1, ctrl2, attached ? "attached" : "detached"); 228 229 return 0; 230 } 231 232 /* 233 * max8997_muic_get_cable_type - Return cable type and check cable state 234 * @info: the instance including private data of max8997 MUIC 235 * @group: the path according to attached cable 236 * @attached: store cable state and return 237 * 238 * This function check the cable state either attached or detached, 239 * and then divide precise type of cable according to cable group. 240 * - MAX8997_CABLE_GROUP_ADC 241 * - MAX8997_CABLE_GROUP_CHG 242 */ 243 static int max8997_muic_get_cable_type(struct max8997_muic_info *info, 244 enum max8997_muic_cable_group group, bool *attached) 245 { 246 int cable_type = 0; 247 int adc; 248 int chg_type; 249 250 switch (group) { 251 case MAX8997_CABLE_GROUP_ADC: 252 /* 253 * Read ADC value to check cable type and decide cable state 254 * according to cable type 255 */ 256 adc = info->status[0] & STATUS1_ADC_MASK; 257 adc >>= STATUS1_ADC_SHIFT; 258 259 /* 260 * Check current cable state/cable type and store cable type 261 * (info->prev_cable_type) for handling cable when cable is 262 * detached. 263 */ 264 if (adc == MAX8997_MUIC_ADC_OPEN) { 265 *attached = false; 266 267 cable_type = info->prev_cable_type; 268 info->prev_cable_type = MAX8997_MUIC_ADC_OPEN; 269 } else { 270 *attached = true; 271 272 cable_type = info->prev_cable_type = adc; 273 } 274 break; 275 case MAX8997_CABLE_GROUP_CHG: 276 /* 277 * Read charger type to check cable type and decide cable state 278 * according to type of charger cable. 279 */ 280 chg_type = info->status[1] & STATUS2_CHGTYP_MASK; 281 chg_type >>= STATUS2_CHGTYP_SHIFT; 282 283 if (chg_type == MAX8997_CHARGER_TYPE_NONE) { 284 *attached = false; 285 286 cable_type = info->prev_chg_type; 287 info->prev_chg_type = MAX8997_CHARGER_TYPE_NONE; 288 } else { 289 *attached = true; 290 291 /* 292 * Check current cable state/cable type and store cable 293 * type(info->prev_chg_type) for handling cable when 294 * charger cable is detached. 295 */ 296 cable_type = info->prev_chg_type = chg_type; 297 } 298 299 break; 300 default: 301 dev_err(info->dev, "Unknown cable group (%d)\n", group); 302 cable_type = -EINVAL; 303 break; 304 } 305 306 return cable_type; 307 } 308 309 static int max8997_muic_handle_usb(struct max8997_muic_info *info, 310 enum max8997_muic_usb_type usb_type, bool attached) 311 { 312 int ret = 0; 313 314 ret = max8997_muic_set_path(info, info->path_usb, attached); 315 if (ret < 0) { 316 dev_err(info->dev, "failed to update muic register\n"); 317 return ret; 318 } 319 320 switch (usb_type) { 321 case MAX8997_USB_HOST: 322 extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); 323 break; 324 case MAX8997_USB_DEVICE: 325 extcon_set_state_sync(info->edev, EXTCON_USB, attached); 326 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, 327 attached); 328 break; 329 default: 330 dev_err(info->dev, "failed to detect %s usb cable\n", 331 attached ? "attached" : "detached"); 332 return -EINVAL; 333 } 334 335 return 0; 336 } 337 338 static int max8997_muic_handle_dock(struct max8997_muic_info *info, 339 int cable_type, bool attached) 340 { 341 int ret = 0; 342 343 ret = max8997_muic_set_path(info, CONTROL1_SW_AUDIO, attached); 344 if (ret) { 345 dev_err(info->dev, "failed to update muic register\n"); 346 return ret; 347 } 348 349 switch (cable_type) { 350 case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: 351 case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: 352 extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); 353 break; 354 default: 355 dev_err(info->dev, "failed to detect %s dock device\n", 356 attached ? "attached" : "detached"); 357 return -EINVAL; 358 } 359 360 return 0; 361 } 362 363 static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, 364 bool attached) 365 { 366 int ret = 0; 367 368 /* switch to UART */ 369 ret = max8997_muic_set_path(info, info->path_uart, attached); 370 if (ret) { 371 dev_err(info->dev, "failed to update muic register\n"); 372 return ret; 373 } 374 375 extcon_set_state_sync(info->edev, EXTCON_JIG, attached); 376 377 return 0; 378 } 379 380 static int max8997_muic_adc_handler(struct max8997_muic_info *info) 381 { 382 int cable_type; 383 bool attached; 384 int ret = 0; 385 386 /* Check cable state which is either detached or attached */ 387 cable_type = max8997_muic_get_cable_type(info, 388 MAX8997_CABLE_GROUP_ADC, &attached); 389 390 switch (cable_type) { 391 case MAX8997_MUIC_ADC_GROUND: 392 ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached); 393 if (ret < 0) 394 return ret; 395 break; 396 case MAX8997_MUIC_ADC_MHL: 397 extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); 398 break; 399 case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF: 400 case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON: 401 ret = max8997_muic_handle_usb(info, 402 MAX8997_USB_DEVICE, attached); 403 if (ret < 0) 404 return ret; 405 break; 406 case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: 407 case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: 408 ret = max8997_muic_handle_dock(info, cable_type, attached); 409 if (ret < 0) 410 return ret; 411 break; 412 case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF: 413 ret = max8997_muic_handle_jig_uart(info, attached); 414 break; 415 case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON: 416 case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON: 417 case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON: 418 case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON: 419 case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON: 420 case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON: 421 case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON: 422 case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON: 423 case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON: 424 case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON: 425 case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON: 426 case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON: 427 case MAX8997_MUIC_ADC_RESERVED_ACC_1: 428 case MAX8997_MUIC_ADC_RESERVED_ACC_2: 429 case MAX8997_MUIC_ADC_RESERVED_ACC_3: 430 case MAX8997_MUIC_ADC_RESERVED_ACC_4: 431 case MAX8997_MUIC_ADC_RESERVED_ACC_5: 432 case MAX8997_MUIC_ADC_CEA936_AUDIO: 433 case MAX8997_MUIC_ADC_PHONE_POWERED_DEV: 434 case MAX8997_MUIC_ADC_TTY_CONVERTER: 435 case MAX8997_MUIC_ADC_UART_CABLE: 436 case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG: 437 case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG: 438 case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE: 439 /* 440 * This cable isn't used in general case if it is specially 441 * needed to detect additional cable, should implement 442 * proper operation when this cable is attached/detached. 443 */ 444 dev_info(info->dev, 445 "cable is %s but it isn't used (type:0x%x)\n", 446 attached ? "attached" : "detached", cable_type); 447 return -EAGAIN; 448 default: 449 dev_err(info->dev, 450 "failed to detect %s unknown cable (type:0x%x)\n", 451 attached ? "attached" : "detached", cable_type); 452 return -EINVAL; 453 } 454 455 return 0; 456 } 457 458 static int max8997_muic_chg_handler(struct max8997_muic_info *info) 459 { 460 int chg_type; 461 bool attached; 462 int adc; 463 464 chg_type = max8997_muic_get_cable_type(info, 465 MAX8997_CABLE_GROUP_CHG, &attached); 466 467 switch (chg_type) { 468 case MAX8997_CHARGER_TYPE_NONE: 469 break; 470 case MAX8997_CHARGER_TYPE_USB: 471 adc = info->status[0] & STATUS1_ADC_MASK; 472 adc >>= STATUS1_ADC_SHIFT; 473 474 if ((adc & STATUS1_ADC_MASK) == MAX8997_MUIC_ADC_OPEN) { 475 max8997_muic_handle_usb(info, 476 MAX8997_USB_DEVICE, attached); 477 } 478 break; 479 case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: 480 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, 481 attached); 482 break; 483 case MAX8997_CHARGER_TYPE_DEDICATED_CHG: 484 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, 485 attached); 486 break; 487 case MAX8997_CHARGER_TYPE_500MA: 488 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, 489 attached); 490 break; 491 case MAX8997_CHARGER_TYPE_1A: 492 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, 493 attached); 494 break; 495 default: 496 dev_err(info->dev, 497 "failed to detect %s unknown chg cable (type:0x%x)\n", 498 attached ? "attached" : "detached", chg_type); 499 return -EINVAL; 500 } 501 502 return 0; 503 } 504 505 static void max8997_muic_irq_work(struct work_struct *work) 506 { 507 struct max8997_muic_info *info = container_of(work, 508 struct max8997_muic_info, irq_work); 509 int irq_type = 0; 510 int i, ret; 511 512 if (!info->edev) 513 return; 514 515 mutex_lock(&info->mutex); 516 517 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) 518 if (info->irq == muic_irqs[i].virq) 519 irq_type = muic_irqs[i].irq; 520 521 ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, 522 2, info->status); 523 if (ret) { 524 dev_err(info->dev, "failed to read muic register\n"); 525 mutex_unlock(&info->mutex); 526 return; 527 } 528 529 switch (irq_type) { 530 case MAX8997_MUICIRQ_ADCError: 531 case MAX8997_MUICIRQ_ADCLow: 532 case MAX8997_MUICIRQ_ADC: 533 /* Handle all of cable except for charger cable */ 534 ret = max8997_muic_adc_handler(info); 535 break; 536 case MAX8997_MUICIRQ_VBVolt: 537 case MAX8997_MUICIRQ_DBChg: 538 case MAX8997_MUICIRQ_DCDTmr: 539 case MAX8997_MUICIRQ_ChgDetRun: 540 case MAX8997_MUICIRQ_ChgTyp: 541 /* Handle charger cable */ 542 ret = max8997_muic_chg_handler(info); 543 break; 544 case MAX8997_MUICIRQ_OVP: 545 break; 546 default: 547 dev_info(info->dev, "misc interrupt: irq %d occurred\n", 548 irq_type); 549 mutex_unlock(&info->mutex); 550 return; 551 } 552 553 if (ret < 0) 554 dev_err(info->dev, "failed to handle MUIC interrupt\n"); 555 556 mutex_unlock(&info->mutex); 557 } 558 559 static irqreturn_t max8997_muic_irq_handler(int irq, void *data) 560 { 561 struct max8997_muic_info *info = data; 562 563 dev_dbg(info->dev, "irq:%d\n", irq); 564 info->irq = irq; 565 566 schedule_work(&info->irq_work); 567 568 return IRQ_HANDLED; 569 } 570 571 static int max8997_muic_detect_dev(struct max8997_muic_info *info) 572 { 573 int ret = 0; 574 int adc; 575 int chg_type; 576 bool attached; 577 578 mutex_lock(&info->mutex); 579 580 /* Read STATUSx register to detect accessory */ 581 ret = max8997_bulk_read(info->muic, 582 MAX8997_MUIC_REG_STATUS1, 2, info->status); 583 if (ret) { 584 dev_err(info->dev, "failed to read MUIC register\n"); 585 mutex_unlock(&info->mutex); 586 return ret; 587 } 588 589 adc = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_ADC, 590 &attached); 591 if (attached && adc != MAX8997_MUIC_ADC_OPEN) { 592 ret = max8997_muic_adc_handler(info); 593 if (ret < 0) { 594 dev_err(info->dev, "Cannot detect ADC cable\n"); 595 mutex_unlock(&info->mutex); 596 return ret; 597 } 598 } 599 600 chg_type = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_CHG, 601 &attached); 602 if (attached && chg_type != MAX8997_CHARGER_TYPE_NONE) { 603 ret = max8997_muic_chg_handler(info); 604 if (ret < 0) { 605 dev_err(info->dev, "Cannot detect charger cable\n"); 606 mutex_unlock(&info->mutex); 607 return ret; 608 } 609 } 610 611 mutex_unlock(&info->mutex); 612 613 return 0; 614 } 615 616 static void max8997_muic_detect_cable_wq(struct work_struct *work) 617 { 618 struct max8997_muic_info *info = container_of(to_delayed_work(work), 619 struct max8997_muic_info, wq_detcable); 620 int ret; 621 622 ret = max8997_muic_detect_dev(info); 623 if (ret < 0) 624 dev_err(info->dev, "failed to detect cable type\n"); 625 } 626 627 static int max8997_muic_probe(struct platform_device *pdev) 628 { 629 struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent); 630 struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev); 631 struct max8997_muic_info *info; 632 int delay_jiffies; 633 int cable_type; 634 bool attached; 635 int ret, i; 636 637 info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info), 638 GFP_KERNEL); 639 if (!info) 640 return -ENOMEM; 641 642 info->dev = &pdev->dev; 643 info->muic = max8997->muic; 644 645 platform_set_drvdata(pdev, info); 646 mutex_init(&info->mutex); 647 648 INIT_WORK(&info->irq_work, max8997_muic_irq_work); 649 650 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) { 651 struct max8997_muic_irq *muic_irq = &muic_irqs[i]; 652 unsigned int virq = 0; 653 654 virq = irq_create_mapping(max8997->irq_domain, muic_irq->irq); 655 if (!virq) { 656 ret = -EINVAL; 657 goto err_irq; 658 } 659 muic_irq->virq = virq; 660 661 ret = request_threaded_irq(virq, NULL, 662 max8997_muic_irq_handler, 663 IRQF_NO_SUSPEND, 664 muic_irq->name, info); 665 if (ret) { 666 dev_err(&pdev->dev, 667 "failed: irq request (IRQ: %d, error :%d)\n", 668 muic_irq->irq, ret); 669 goto err_irq; 670 } 671 } 672 673 /* External connector */ 674 info->edev = devm_extcon_dev_allocate(&pdev->dev, max8997_extcon_cable); 675 if (IS_ERR(info->edev)) { 676 dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); 677 ret = PTR_ERR(info->edev); 678 goto err_irq; 679 } 680 681 ret = devm_extcon_dev_register(&pdev->dev, info->edev); 682 if (ret) { 683 dev_err(&pdev->dev, "failed to register extcon device\n"); 684 goto err_irq; 685 } 686 687 if (pdata && pdata->muic_pdata) { 688 struct max8997_muic_platform_data *muic_pdata 689 = pdata->muic_pdata; 690 691 /* Initialize registers according to platform data */ 692 for (i = 0; i < muic_pdata->num_init_data; i++) { 693 max8997_write_reg(info->muic, 694 muic_pdata->init_data[i].addr, 695 muic_pdata->init_data[i].data); 696 } 697 698 /* 699 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB 700 * h/w path of COMP2/COMN1 on CONTROL1 register. 701 */ 702 if (muic_pdata->path_uart) 703 info->path_uart = muic_pdata->path_uart; 704 else 705 info->path_uart = CONTROL1_SW_UART; 706 707 if (muic_pdata->path_usb) 708 info->path_usb = muic_pdata->path_usb; 709 else 710 info->path_usb = CONTROL1_SW_USB; 711 712 /* 713 * Default delay time for detecting cable state 714 * after certain time. 715 */ 716 if (muic_pdata->detcable_delay_ms) 717 delay_jiffies = 718 msecs_to_jiffies(muic_pdata->detcable_delay_ms); 719 else 720 delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); 721 } else { 722 info->path_uart = CONTROL1_SW_UART; 723 info->path_usb = CONTROL1_SW_USB; 724 delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); 725 } 726 727 /* Set initial path for UART when JIG is connected to get serial logs */ 728 ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, 729 2, info->status); 730 if (ret) { 731 dev_err(info->dev, "failed to read MUIC register\n"); 732 return ret; 733 } 734 cable_type = max8997_muic_get_cable_type(info, 735 MAX8997_CABLE_GROUP_ADC, &attached); 736 if (attached && cable_type == MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF) 737 max8997_muic_set_path(info, info->path_uart, true); 738 739 /* Set ADC debounce time */ 740 max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); 741 742 /* 743 * Detect accessory after completing the initialization of platform 744 * 745 * - Use delayed workqueue to detect cable state and then 746 * notify cable state to notifiee/platform through uevent. 747 * After completing the booting of platform, the extcon provider 748 * driver should notify cable state to upper layer. 749 */ 750 INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq); 751 queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, 752 delay_jiffies); 753 754 return 0; 755 756 err_irq: 757 while (--i >= 0) 758 free_irq(muic_irqs[i].virq, info); 759 return ret; 760 } 761 762 static int max8997_muic_remove(struct platform_device *pdev) 763 { 764 struct max8997_muic_info *info = platform_get_drvdata(pdev); 765 int i; 766 767 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) 768 free_irq(muic_irqs[i].virq, info); 769 cancel_work_sync(&info->irq_work); 770 771 return 0; 772 } 773 774 static struct platform_driver max8997_muic_driver = { 775 .driver = { 776 .name = DEV_NAME, 777 }, 778 .probe = max8997_muic_probe, 779 .remove = max8997_muic_remove, 780 }; 781 782 module_platform_driver(max8997_muic_driver); 783 784 MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver"); 785 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); 786 MODULE_LICENSE("GPL"); 787