1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // extcon-max77843.c - Maxim MAX77843 extcon driver to support
4 //			MUIC(Micro USB Interface Controller)
5 //
6 // Copyright (C) 2015 Samsung Electronics
7 // Author: Jaewon Kim <jaewon02.kim@samsung.com>
8 
9 #include <linux/extcon-provider.h>
10 #include <linux/i2c.h>
11 #include <linux/interrupt.h>
12 #include <linux/kernel.h>
13 #include <linux/mfd/max77693-common.h>
14 #include <linux/mfd/max77843-private.h>
15 #include <linux/module.h>
16 #include <linux/platform_device.h>
17 #include <linux/workqueue.h>
18 
19 #define DELAY_MS_DEFAULT		15000	/* unit: millisecond */
20 
21 enum max77843_muic_status {
22 	MAX77843_MUIC_STATUS1 = 0,
23 	MAX77843_MUIC_STATUS2,
24 	MAX77843_MUIC_STATUS3,
25 
26 	MAX77843_MUIC_STATUS_NUM,
27 };
28 
29 struct max77843_muic_info {
30 	struct device *dev;
31 	struct max77693_dev *max77843;
32 	struct extcon_dev *edev;
33 
34 	struct mutex mutex;
35 	struct work_struct irq_work;
36 	struct delayed_work wq_detcable;
37 
38 	u8 status[MAX77843_MUIC_STATUS_NUM];
39 	int prev_cable_type;
40 	int prev_chg_type;
41 	int prev_gnd_type;
42 
43 	bool irq_adc;
44 	bool irq_chg;
45 };
46 
47 enum max77843_muic_cable_group {
48 	MAX77843_CABLE_GROUP_ADC = 0,
49 	MAX77843_CABLE_GROUP_ADC_GND,
50 	MAX77843_CABLE_GROUP_CHG,
51 };
52 
53 enum max77843_muic_adc_debounce_time {
54 	MAX77843_DEBOUNCE_TIME_5MS = 0,
55 	MAX77843_DEBOUNCE_TIME_10MS,
56 	MAX77843_DEBOUNCE_TIME_25MS,
57 	MAX77843_DEBOUNCE_TIME_38_62MS,
58 };
59 
60 /* Define accessory cable type */
61 enum max77843_muic_accessory_type {
62 	MAX77843_MUIC_ADC_GROUND = 0,
63 	MAX77843_MUIC_ADC_SEND_END_BUTTON,
64 	MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
65 	MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
66 	MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
67 	MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
68 	MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
69 	MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
70 	MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
71 	MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
72 	MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
73 	MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
74 	MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
75 	MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
76 	MAX77843_MUIC_ADC_RESERVED_ACC_1,
77 	MAX77843_MUIC_ADC_RESERVED_ACC_2,
78 	MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */
79 	MAX77843_MUIC_ADC_RESERVED_ACC_4,
80 	MAX77843_MUIC_ADC_RESERVED_ACC_5,
81 	MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
82 	MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
83 	MAX77843_MUIC_ADC_TTY_CONVERTER,
84 	MAX77843_MUIC_ADC_UART_CABLE,
85 	MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
86 	MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
87 	MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
88 	MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
89 	MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
90 	MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
91 	MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
92 	MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
93 	MAX77843_MUIC_ADC_OPEN,
94 
95 	/*
96 	 * The below accessories should check
97 	 * not only ADC value but also ADC1K and VBVolt value.
98 	 */
99 						/* Offset|ADC1K|VBVolt| */
100 	MAX77843_MUIC_GND_USB_HOST = 0x100,	/*    0x1|    0|     0| */
101 	MAX77843_MUIC_GND_USB_HOST_VB = 0x101,	/*    0x1|    0|     1| */
102 	MAX77843_MUIC_GND_MHL = 0x102,		/*    0x1|    1|     0| */
103 	MAX77843_MUIC_GND_MHL_VB = 0x103,	/*    0x1|    1|     1| */
104 };
105 
106 /* Define charger cable type */
107 enum max77843_muic_charger_type {
108 	MAX77843_MUIC_CHG_NONE = 0,
109 	MAX77843_MUIC_CHG_USB,
110 	MAX77843_MUIC_CHG_DOWNSTREAM,
111 	MAX77843_MUIC_CHG_DEDICATED,
112 	MAX77843_MUIC_CHG_SPECIAL_500MA,
113 	MAX77843_MUIC_CHG_SPECIAL_1A,
114 	MAX77843_MUIC_CHG_SPECIAL_BIAS,
115 	MAX77843_MUIC_CHG_RESERVED,
116 	MAX77843_MUIC_CHG_GND,
117 	MAX77843_MUIC_CHG_DOCK,
118 };
119 
120 static const unsigned int max77843_extcon_cable[] = {
121 	EXTCON_USB,
122 	EXTCON_USB_HOST,
123 	EXTCON_CHG_USB_SDP,
124 	EXTCON_CHG_USB_DCP,
125 	EXTCON_CHG_USB_CDP,
126 	EXTCON_CHG_USB_FAST,
127 	EXTCON_CHG_USB_SLOW,
128 	EXTCON_DISP_MHL,
129 	EXTCON_DOCK,
130 	EXTCON_JIG,
131 	EXTCON_NONE,
132 };
133 
134 struct max77843_muic_irq {
135 	unsigned int irq;
136 	const char *name;
137 	unsigned int virq;
138 };
139 
140 static struct max77843_muic_irq max77843_muic_irqs[] = {
141 	{ MAX77843_MUIC_IRQ_INT1_ADC,		"MUIC-ADC" },
142 	{ MAX77843_MUIC_IRQ_INT1_ADCERROR,	"MUIC-ADC_ERROR" },
143 	{ MAX77843_MUIC_IRQ_INT1_ADC1K,		"MUIC-ADC1K" },
144 	{ MAX77843_MUIC_IRQ_INT2_CHGTYP,	"MUIC-CHGTYP" },
145 	{ MAX77843_MUIC_IRQ_INT2_CHGDETRUN,	"MUIC-CHGDETRUN" },
146 	{ MAX77843_MUIC_IRQ_INT2_DCDTMR,	"MUIC-DCDTMR" },
147 	{ MAX77843_MUIC_IRQ_INT2_DXOVP,		"MUIC-DXOVP" },
148 	{ MAX77843_MUIC_IRQ_INT2_VBVOLT,	"MUIC-VBVOLT" },
149 	{ MAX77843_MUIC_IRQ_INT3_VBADC,		"MUIC-VBADC" },
150 	{ MAX77843_MUIC_IRQ_INT3_VDNMON,	"MUIC-VDNMON" },
151 	{ MAX77843_MUIC_IRQ_INT3_DNRES,		"MUIC-DNRES" },
152 	{ MAX77843_MUIC_IRQ_INT3_MPNACK,	"MUIC-MPNACK"},
153 	{ MAX77843_MUIC_IRQ_INT3_MRXBUFOW,	"MUIC-MRXBUFOW"},
154 	{ MAX77843_MUIC_IRQ_INT3_MRXTRF,	"MUIC-MRXTRF"},
155 	{ MAX77843_MUIC_IRQ_INT3_MRXPERR,	"MUIC-MRXPERR"},
156 	{ MAX77843_MUIC_IRQ_INT3_MRXRDY,	"MUIC-MRXRDY"},
157 };
158 
159 static const struct regmap_config max77843_muic_regmap_config = {
160 	.reg_bits       = 8,
161 	.val_bits       = 8,
162 	.max_register   = MAX77843_MUIC_REG_END,
163 };
164 
165 static const struct regmap_irq max77843_muic_irq[] = {
166 	/* INT1 interrupt */
167 	{ .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
168 	{ .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
169 	{ .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
170 
171 	/* INT2 interrupt */
172 	{ .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
173 	{ .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
174 	{ .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
175 	{ .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
176 	{ .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
177 
178 	/* INT3 interrupt */
179 	{ .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
180 	{ .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
181 	{ .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
182 	{ .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
183 	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
184 	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
185 	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
186 	{ .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
187 };
188 
189 static const struct regmap_irq_chip max77843_muic_irq_chip = {
190 	.name           = "max77843-muic",
191 	.status_base    = MAX77843_MUIC_REG_INT1,
192 	.unmask_base    = MAX77843_MUIC_REG_INTMASK1,
193 	.num_regs       = 3,
194 	.irqs           = max77843_muic_irq,
195 	.num_irqs       = ARRAY_SIZE(max77843_muic_irq),
196 };
197 
198 static int max77843_muic_set_path(struct max77843_muic_info *info,
199 		u8 val, bool attached, bool nobccomp)
200 {
201 	struct max77693_dev *max77843 = info->max77843;
202 	int ret = 0;
203 	unsigned int ctrl1, ctrl2;
204 
205 	if (attached)
206 		ctrl1 = val;
207 	else
208 		ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
209 	if (nobccomp) {
210 		/* Disable BC1.2 protocol and force manual switch control */
211 		ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK;
212 	}
213 
214 	ret = regmap_update_bits(max77843->regmap_muic,
215 			MAX77843_MUIC_REG_CONTROL1,
216 			MAX77843_MUIC_CONTROL1_COM_SW |
217 				MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK,
218 			ctrl1);
219 	if (ret < 0) {
220 		dev_err(info->dev, "Cannot switch MUIC port\n");
221 		return ret;
222 	}
223 
224 	if (attached)
225 		ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
226 	else
227 		ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
228 
229 	ret = regmap_update_bits(max77843->regmap_muic,
230 			MAX77843_MUIC_REG_CONTROL2,
231 			MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
232 			MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
233 	if (ret < 0) {
234 		dev_err(info->dev, "Cannot update lowpower mode\n");
235 		return ret;
236 	}
237 
238 	dev_dbg(info->dev,
239 		"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
240 		ctrl1, ctrl2, attached ? "attached" : "detached");
241 
242 	return 0;
243 }
244 
245 static void max77843_charger_set_otg_vbus(struct max77843_muic_info *info,
246 		 bool on)
247 {
248 	struct max77693_dev *max77843 = info->max77843;
249 	unsigned int cnfg00;
250 
251 	if (on)
252 		cnfg00 = MAX77843_CHG_OTG_MASK | MAX77843_CHG_BOOST_MASK;
253 	else
254 		cnfg00 = MAX77843_CHG_ENABLE | MAX77843_CHG_BUCK_MASK;
255 
256 	regmap_update_bits(max77843->regmap_chg, MAX77843_CHG_REG_CHG_CNFG_00,
257 			   MAX77843_CHG_MODE_MASK, cnfg00);
258 }
259 
260 static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
261 		enum max77843_muic_cable_group group, bool *attached)
262 {
263 	int adc, chg_type, cable_type, gnd_type;
264 
265 	adc = info->status[MAX77843_MUIC_STATUS1] &
266 			MAX77843_MUIC_STATUS1_ADC_MASK;
267 	adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
268 
269 	switch (group) {
270 	case MAX77843_CABLE_GROUP_ADC:
271 		if (adc == MAX77843_MUIC_ADC_OPEN) {
272 			*attached = false;
273 			cable_type = info->prev_cable_type;
274 			info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
275 		} else {
276 			*attached = true;
277 			cable_type = info->prev_cable_type = adc;
278 		}
279 		break;
280 	case MAX77843_CABLE_GROUP_CHG:
281 		chg_type = info->status[MAX77843_MUIC_STATUS2] &
282 				MAX77843_MUIC_STATUS2_CHGTYP_MASK;
283 
284 		/* Check GROUND accessory with charger cable */
285 		if (adc == MAX77843_MUIC_ADC_GROUND) {
286 			if (chg_type == MAX77843_MUIC_CHG_NONE) {
287 				/*
288 				 * The following state when charger cable is
289 				 * disconnected but the GROUND accessory still
290 				 * connected.
291 				 */
292 				*attached = false;
293 				cable_type = info->prev_chg_type;
294 				info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
295 			} else {
296 
297 				/*
298 				 * The following state when charger cable is
299 				 * connected on the GROUND accessory.
300 				 */
301 				*attached = true;
302 				cable_type = MAX77843_MUIC_CHG_GND;
303 				info->prev_chg_type = MAX77843_MUIC_CHG_GND;
304 			}
305 			break;
306 		}
307 
308 		if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */
309 			if (chg_type == MAX77843_MUIC_CHG_NONE) {
310 				*attached = false;
311 				cable_type = info->prev_chg_type;
312 				info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
313 			} else {
314 				*attached = true;
315 				cable_type = MAX77843_MUIC_CHG_DOCK;
316 				info->prev_chg_type = MAX77843_MUIC_CHG_DOCK;
317 			}
318 			break;
319 		}
320 
321 		if (chg_type == MAX77843_MUIC_CHG_NONE) {
322 			*attached = false;
323 			cable_type = info->prev_chg_type;
324 			info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
325 		} else {
326 			*attached = true;
327 			cable_type = info->prev_chg_type = chg_type;
328 		}
329 		break;
330 	case MAX77843_CABLE_GROUP_ADC_GND:
331 		if (adc == MAX77843_MUIC_ADC_OPEN) {
332 			*attached = false;
333 			cable_type = info->prev_gnd_type;
334 			info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
335 		} else {
336 			*attached = true;
337 
338 			/*
339 			 * Offset|ADC1K|VBVolt|
340 			 *    0x1|    0|     0| USB-HOST
341 			 *    0x1|    0|     1| USB-HOST with VB
342 			 *    0x1|    1|     0| MHL
343 			 *    0x1|    1|     1| MHL with VB
344 			 */
345 			/* Get ADC1K register bit */
346 			gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
347 					MAX77843_MUIC_STATUS1_ADC1K_MASK);
348 
349 			/* Get VBVolt register bit */
350 			gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
351 					MAX77843_MUIC_STATUS2_VBVOLT_MASK);
352 			gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
353 
354 			/* Offset of GND cable */
355 			gnd_type |= MAX77843_MUIC_GND_USB_HOST;
356 			cable_type = info->prev_gnd_type = gnd_type;
357 		}
358 		break;
359 	default:
360 		dev_err(info->dev, "Unknown cable group (%d)\n", group);
361 		cable_type = -EINVAL;
362 		break;
363 	}
364 
365 	return cable_type;
366 }
367 
368 static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
369 {
370 	int ret, gnd_cable_type;
371 	bool attached;
372 
373 	gnd_cable_type = max77843_muic_get_cable_type(info,
374 			MAX77843_CABLE_GROUP_ADC_GND, &attached);
375 	dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
376 			attached ? "attached" : "detached", gnd_cable_type);
377 
378 	switch (gnd_cable_type) {
379 	case MAX77843_MUIC_GND_USB_HOST:
380 	case MAX77843_MUIC_GND_USB_HOST_VB:
381 		ret = max77843_muic_set_path(info,
382 					     MAX77843_MUIC_CONTROL1_SW_USB,
383 					     attached, false);
384 		if (ret < 0)
385 			return ret;
386 
387 		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
388 		max77843_charger_set_otg_vbus(info, attached);
389 		break;
390 	case MAX77843_MUIC_GND_MHL_VB:
391 	case MAX77843_MUIC_GND_MHL:
392 		ret = max77843_muic_set_path(info,
393 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
394 					     attached, false);
395 		if (ret < 0)
396 			return ret;
397 
398 		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
399 		break;
400 	default:
401 		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
402 			attached ? "attached" : "detached", gnd_cable_type);
403 		return -EINVAL;
404 	}
405 
406 	return 0;
407 }
408 
409 static int max77843_muic_jig_handler(struct max77843_muic_info *info,
410 		int cable_type, bool attached)
411 {
412 	int ret;
413 	u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
414 
415 	dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
416 			attached ? "attached" : "detached", cable_type);
417 
418 	switch (cable_type) {
419 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
420 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
421 		path = MAX77843_MUIC_CONTROL1_SW_USB;
422 		break;
423 	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
424 		path = MAX77843_MUIC_CONTROL1_SW_UART;
425 		break;
426 	default:
427 		return -EINVAL;
428 	}
429 
430 	ret = max77843_muic_set_path(info, path, attached, false);
431 	if (ret < 0)
432 		return ret;
433 
434 	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
435 
436 	return 0;
437 }
438 
439 static int max77843_muic_dock_handler(struct max77843_muic_info *info,
440 		bool attached)
441 {
442 	int ret;
443 
444 	dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n",
445 			attached ? "attached" : "detached");
446 
447 	ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB,
448 				     attached, attached);
449 	if (ret < 0)
450 		return ret;
451 
452 	extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
453 	extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
454 	extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
455 
456 	return 0;
457 }
458 
459 static int max77843_muic_adc_handler(struct max77843_muic_info *info)
460 {
461 	int ret, cable_type;
462 	bool attached;
463 
464 	cable_type = max77843_muic_get_cable_type(info,
465 			MAX77843_CABLE_GROUP_ADC, &attached);
466 
467 	dev_dbg(info->dev,
468 		"external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
469 		attached ? "attached" : "detached", cable_type,
470 		info->prev_cable_type);
471 
472 	switch (cable_type) {
473 	case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */
474 		ret = max77843_muic_dock_handler(info, attached);
475 		if (ret < 0)
476 			return ret;
477 		break;
478 	case MAX77843_MUIC_ADC_GROUND:
479 		ret = max77843_muic_adc_gnd_handler(info);
480 		if (ret < 0)
481 			return ret;
482 		break;
483 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
484 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
485 	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
486 		ret = max77843_muic_jig_handler(info, cable_type, attached);
487 		if (ret < 0)
488 			return ret;
489 		break;
490 	case MAX77843_MUIC_ADC_SEND_END_BUTTON:
491 	case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
492 	case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
493 	case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
494 	case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
495 	case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
496 	case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
497 	case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
498 	case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
499 	case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
500 	case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
501 	case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
502 	case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
503 	case MAX77843_MUIC_ADC_RESERVED_ACC_1:
504 	case MAX77843_MUIC_ADC_RESERVED_ACC_2:
505 	case MAX77843_MUIC_ADC_RESERVED_ACC_4:
506 	case MAX77843_MUIC_ADC_RESERVED_ACC_5:
507 	case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
508 	case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
509 	case MAX77843_MUIC_ADC_TTY_CONVERTER:
510 	case MAX77843_MUIC_ADC_UART_CABLE:
511 	case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
512 	case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
513 	case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
514 	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
515 	case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
516 	case MAX77843_MUIC_ADC_OPEN:
517 		dev_err(info->dev,
518 			"accessory is %s but it isn't used (adc:0x%x)\n",
519 			attached ? "attached" : "detached", cable_type);
520 		return -EAGAIN;
521 	default:
522 		dev_err(info->dev,
523 			"failed to detect %s accessory (adc:0x%x)\n",
524 			attached ? "attached" : "detached", cable_type);
525 		return -EINVAL;
526 	}
527 
528 	return 0;
529 }
530 
531 static int max77843_muic_chg_handler(struct max77843_muic_info *info)
532 {
533 	int ret, chg_type, gnd_type;
534 	bool attached;
535 
536 	chg_type = max77843_muic_get_cable_type(info,
537 			MAX77843_CABLE_GROUP_CHG, &attached);
538 
539 	dev_dbg(info->dev,
540 		"external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
541 		attached ? "attached" : "detached",
542 		chg_type, info->prev_chg_type);
543 
544 	switch (chg_type) {
545 	case MAX77843_MUIC_CHG_USB:
546 		ret = max77843_muic_set_path(info,
547 					     MAX77843_MUIC_CONTROL1_SW_USB,
548 					     attached, false);
549 		if (ret < 0)
550 			return ret;
551 
552 		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
553 		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
554 					attached);
555 		break;
556 	case MAX77843_MUIC_CHG_DOWNSTREAM:
557 		ret = max77843_muic_set_path(info,
558 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
559 					     attached, false);
560 		if (ret < 0)
561 			return ret;
562 
563 		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
564 					attached);
565 		break;
566 	case MAX77843_MUIC_CHG_DEDICATED:
567 		ret = max77843_muic_set_path(info,
568 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
569 					     attached, false);
570 		if (ret < 0)
571 			return ret;
572 
573 		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
574 					attached);
575 		break;
576 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
577 		ret = max77843_muic_set_path(info,
578 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
579 					     attached, false);
580 		if (ret < 0)
581 			return ret;
582 
583 		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
584 					attached);
585 		break;
586 	case MAX77843_MUIC_CHG_SPECIAL_1A:
587 		ret = max77843_muic_set_path(info,
588 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
589 					     attached, false);
590 		if (ret < 0)
591 			return ret;
592 
593 		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
594 					attached);
595 		break;
596 	case MAX77843_MUIC_CHG_GND:
597 		gnd_type = max77843_muic_get_cable_type(info,
598 				MAX77843_CABLE_GROUP_ADC_GND, &attached);
599 
600 		/* Charger cable on MHL accessory is attach or detach */
601 		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
602 			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
603 						true);
604 		else if (gnd_type == MAX77843_MUIC_GND_MHL)
605 			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
606 						false);
607 		break;
608 	case MAX77843_MUIC_CHG_DOCK:
609 		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached);
610 		break;
611 	case MAX77843_MUIC_CHG_NONE:
612 		break;
613 	default:
614 		dev_err(info->dev,
615 			"failed to detect %s accessory (chg_type:0x%x)\n",
616 			attached ? "attached" : "detached", chg_type);
617 
618 		max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
619 				       attached, false);
620 		return -EINVAL;
621 	}
622 
623 	return 0;
624 }
625 
626 static void max77843_muic_irq_work(struct work_struct *work)
627 {
628 	struct max77843_muic_info *info = container_of(work,
629 			struct max77843_muic_info, irq_work);
630 	struct max77693_dev *max77843 = info->max77843;
631 	int ret = 0;
632 
633 	mutex_lock(&info->mutex);
634 
635 	ret = regmap_bulk_read(max77843->regmap_muic,
636 			MAX77843_MUIC_REG_STATUS1, info->status,
637 			MAX77843_MUIC_STATUS_NUM);
638 	if (ret) {
639 		dev_err(info->dev, "Cannot read STATUS registers\n");
640 		mutex_unlock(&info->mutex);
641 		return;
642 	}
643 
644 	if (info->irq_adc) {
645 		ret = max77843_muic_adc_handler(info);
646 		if (ret)
647 			dev_err(info->dev, "Unknown cable type\n");
648 		info->irq_adc = false;
649 	}
650 
651 	if (info->irq_chg) {
652 		ret = max77843_muic_chg_handler(info);
653 		if (ret)
654 			dev_err(info->dev, "Unknown charger type\n");
655 		info->irq_chg = false;
656 	}
657 
658 	mutex_unlock(&info->mutex);
659 }
660 
661 static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
662 {
663 	struct max77843_muic_info *info = data;
664 	int i, irq_type = -1;
665 
666 	for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
667 		if (irq == max77843_muic_irqs[i].virq)
668 			irq_type = max77843_muic_irqs[i].irq;
669 
670 	switch (irq_type) {
671 	case MAX77843_MUIC_IRQ_INT1_ADC:
672 	case MAX77843_MUIC_IRQ_INT1_ADCERROR:
673 	case MAX77843_MUIC_IRQ_INT1_ADC1K:
674 		info->irq_adc = true;
675 		break;
676 	case MAX77843_MUIC_IRQ_INT2_CHGTYP:
677 	case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
678 	case MAX77843_MUIC_IRQ_INT2_DCDTMR:
679 	case MAX77843_MUIC_IRQ_INT2_DXOVP:
680 	case MAX77843_MUIC_IRQ_INT2_VBVOLT:
681 		info->irq_chg = true;
682 		break;
683 	case MAX77843_MUIC_IRQ_INT3_VBADC:
684 	case MAX77843_MUIC_IRQ_INT3_VDNMON:
685 	case MAX77843_MUIC_IRQ_INT3_DNRES:
686 	case MAX77843_MUIC_IRQ_INT3_MPNACK:
687 	case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
688 	case MAX77843_MUIC_IRQ_INT3_MRXTRF:
689 	case MAX77843_MUIC_IRQ_INT3_MRXPERR:
690 	case MAX77843_MUIC_IRQ_INT3_MRXRDY:
691 		break;
692 	default:
693 		dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
694 		break;
695 	}
696 
697 	schedule_work(&info->irq_work);
698 
699 	return IRQ_HANDLED;
700 }
701 
702 static void max77843_muic_detect_cable_wq(struct work_struct *work)
703 {
704 	struct max77843_muic_info *info = container_of(to_delayed_work(work),
705 			struct max77843_muic_info, wq_detcable);
706 	struct max77693_dev *max77843 = info->max77843;
707 	int chg_type, adc, ret;
708 	bool attached;
709 
710 	mutex_lock(&info->mutex);
711 
712 	ret = regmap_bulk_read(max77843->regmap_muic,
713 			MAX77843_MUIC_REG_STATUS1, info->status,
714 			MAX77843_MUIC_STATUS_NUM);
715 	if (ret) {
716 		dev_err(info->dev, "Cannot read STATUS registers\n");
717 		goto err_cable_wq;
718 	}
719 
720 	adc = max77843_muic_get_cable_type(info,
721 			MAX77843_CABLE_GROUP_ADC, &attached);
722 	if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
723 		ret = max77843_muic_adc_handler(info);
724 		if (ret < 0) {
725 			dev_err(info->dev, "Cannot detect accessory\n");
726 			goto err_cable_wq;
727 		}
728 	}
729 
730 	chg_type = max77843_muic_get_cable_type(info,
731 			MAX77843_CABLE_GROUP_CHG, &attached);
732 	if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
733 		ret = max77843_muic_chg_handler(info);
734 		if (ret < 0) {
735 			dev_err(info->dev, "Cannot detect charger accessory\n");
736 			goto err_cable_wq;
737 		}
738 	}
739 
740 err_cable_wq:
741 	mutex_unlock(&info->mutex);
742 }
743 
744 static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
745 		enum max77843_muic_adc_debounce_time time)
746 {
747 	struct max77693_dev *max77843 = info->max77843;
748 	int ret;
749 
750 	switch (time) {
751 	case MAX77843_DEBOUNCE_TIME_5MS:
752 	case MAX77843_DEBOUNCE_TIME_10MS:
753 	case MAX77843_DEBOUNCE_TIME_25MS:
754 	case MAX77843_DEBOUNCE_TIME_38_62MS:
755 		ret = regmap_update_bits(max77843->regmap_muic,
756 				MAX77843_MUIC_REG_CONTROL4,
757 				MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
758 				time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
759 		if (ret < 0) {
760 			dev_err(info->dev, "Cannot write MUIC regmap\n");
761 			return ret;
762 		}
763 		break;
764 	default:
765 		dev_err(info->dev, "Invalid ADC debounce time\n");
766 		return -EINVAL;
767 	}
768 
769 	return 0;
770 }
771 
772 static int max77843_init_muic_regmap(struct max77693_dev *max77843)
773 {
774 	int ret;
775 
776 	max77843->i2c_muic = i2c_new_dummy_device(max77843->i2c->adapter,
777 			I2C_ADDR_MUIC);
778 	if (IS_ERR(max77843->i2c_muic)) {
779 		dev_err(&max77843->i2c->dev,
780 				"Cannot allocate I2C device for MUIC\n");
781 		return PTR_ERR(max77843->i2c_muic);
782 	}
783 
784 	i2c_set_clientdata(max77843->i2c_muic, max77843);
785 
786 	max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
787 			&max77843_muic_regmap_config);
788 	if (IS_ERR(max77843->regmap_muic)) {
789 		ret = PTR_ERR(max77843->regmap_muic);
790 		goto err_muic_i2c;
791 	}
792 
793 	ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
794 			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
795 			0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
796 	if (ret < 0) {
797 		dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
798 		goto err_muic_i2c;
799 	}
800 
801 	return 0;
802 
803 err_muic_i2c:
804 	i2c_unregister_device(max77843->i2c_muic);
805 
806 	return ret;
807 }
808 
809 static int max77843_muic_probe(struct platform_device *pdev)
810 {
811 	struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
812 	struct max77843_muic_info *info;
813 	unsigned int id;
814 	int cable_type;
815 	bool attached;
816 	int i, ret;
817 
818 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
819 	if (!info)
820 		return -ENOMEM;
821 
822 	info->dev = &pdev->dev;
823 	info->max77843 = max77843;
824 
825 	platform_set_drvdata(pdev, info);
826 	mutex_init(&info->mutex);
827 
828 	/* Initialize i2c and regmap */
829 	ret = max77843_init_muic_regmap(max77843);
830 	if (ret) {
831 		dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
832 		return ret;
833 	}
834 
835 	/* Turn off auto detection configuration */
836 	ret = regmap_update_bits(max77843->regmap_muic,
837 			MAX77843_MUIC_REG_CONTROL4,
838 			MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
839 			MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
840 			CONTROL4_AUTO_DISABLE);
841 
842 	/* Initialize extcon device */
843 	info->edev = devm_extcon_dev_allocate(&pdev->dev,
844 			max77843_extcon_cable);
845 	if (IS_ERR(info->edev)) {
846 		dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
847 		ret = PTR_ERR(info->edev);
848 		goto err_muic_irq;
849 	}
850 
851 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
852 	if (ret) {
853 		dev_err(&pdev->dev, "Failed to register extcon device\n");
854 		goto err_muic_irq;
855 	}
856 
857 	/* Set ADC debounce time */
858 	max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
859 
860 	/* Set initial path for UART when JIG is connected to get serial logs */
861 	ret = regmap_bulk_read(max77843->regmap_muic,
862 			MAX77843_MUIC_REG_STATUS1, info->status,
863 			MAX77843_MUIC_STATUS_NUM);
864 	if (ret) {
865 		dev_err(info->dev, "Cannot read STATUS registers\n");
866 		goto err_muic_irq;
867 	}
868 	cable_type = max77843_muic_get_cable_type(info, MAX77843_CABLE_GROUP_ADC,
869 					 &attached);
870 	if (attached && cable_type == MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF)
871 		max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART,
872 				       true, false);
873 
874 	/* Check revision number of MUIC device */
875 	ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
876 	if (ret < 0) {
877 		dev_err(&pdev->dev, "Failed to read revision number\n");
878 		goto err_muic_irq;
879 	}
880 	dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
881 
882 	/* Support virtual irq domain for max77843 MUIC device */
883 	INIT_WORK(&info->irq_work, max77843_muic_irq_work);
884 
885 	/* Clear IRQ bits before request IRQs */
886 	ret = regmap_bulk_read(max77843->regmap_muic,
887 			MAX77843_MUIC_REG_INT1, info->status,
888 			MAX77843_MUIC_STATUS_NUM);
889 	if (ret) {
890 		dev_err(&pdev->dev, "Failed to Clear IRQ bits\n");
891 		goto err_muic_irq;
892 	}
893 
894 	for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
895 		struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
896 		int virq = 0;
897 
898 		virq = regmap_irq_get_virq(max77843->irq_data_muic,
899 				muic_irq->irq);
900 		if (virq <= 0) {
901 			ret = -EINVAL;
902 			goto err_muic_irq;
903 		}
904 		muic_irq->virq = virq;
905 
906 		ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
907 				max77843_muic_irq_handler, IRQF_NO_SUSPEND,
908 				muic_irq->name, info);
909 		if (ret) {
910 			dev_err(&pdev->dev,
911 				"Failed to request irq (IRQ: %d, error: %d)\n",
912 				muic_irq->irq, ret);
913 			goto err_muic_irq;
914 		}
915 	}
916 
917 	/* Detect accessory after completing the initialization of platform */
918 	INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
919 	queue_delayed_work(system_power_efficient_wq,
920 			&info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
921 
922 	return 0;
923 
924 err_muic_irq:
925 	regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
926 	i2c_unregister_device(max77843->i2c_muic);
927 
928 	return ret;
929 }
930 
931 static int max77843_muic_remove(struct platform_device *pdev)
932 {
933 	struct max77843_muic_info *info = platform_get_drvdata(pdev);
934 	struct max77693_dev *max77843 = info->max77843;
935 
936 	cancel_work_sync(&info->irq_work);
937 	regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
938 	i2c_unregister_device(max77843->i2c_muic);
939 
940 	return 0;
941 }
942 
943 static const struct platform_device_id max77843_muic_id[] = {
944 	{ "max77843-muic", },
945 	{ /* sentinel */ },
946 };
947 MODULE_DEVICE_TABLE(platform, max77843_muic_id);
948 
949 static struct platform_driver max77843_muic_driver = {
950 	.driver		= {
951 		.name		= "max77843-muic",
952 	},
953 	.probe		= max77843_muic_probe,
954 	.remove		= max77843_muic_remove,
955 	.id_table	= max77843_muic_id,
956 };
957 
958 static int __init max77843_muic_init(void)
959 {
960 	return platform_driver_register(&max77843_muic_driver);
961 }
962 subsys_initcall(max77843_muic_init);
963 
964 MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
965 MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
966 MODULE_LICENSE("GPL");
967