1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // extcon-max14577.c - MAX14577/77836 extcon driver to support MUIC 4 // 5 // Copyright (C) 2013,2014 Samsung Electronics 6 // Chanwoo Choi <cw00.choi@samsung.com> 7 // Krzysztof Kozlowski <krzk@kernel.org> 8 9 #include <linux/kernel.h> 10 #include <linux/module.h> 11 #include <linux/i2c.h> 12 #include <linux/interrupt.h> 13 #include <linux/platform_device.h> 14 #include <linux/mfd/max14577.h> 15 #include <linux/mfd/max14577-private.h> 16 #include <linux/extcon-provider.h> 17 18 #define DELAY_MS_DEFAULT 17000 /* unit: millisecond */ 19 20 enum max14577_muic_adc_debounce_time { 21 ADC_DEBOUNCE_TIME_5MS = 0, 22 ADC_DEBOUNCE_TIME_10MS, 23 ADC_DEBOUNCE_TIME_25MS, 24 ADC_DEBOUNCE_TIME_38_62MS, 25 }; 26 27 enum max14577_muic_status { 28 MAX14577_MUIC_STATUS1 = 0, 29 MAX14577_MUIC_STATUS2 = 1, 30 MAX14577_MUIC_STATUS_END, 31 }; 32 33 /** 34 * struct max14577_muic_irq 35 * @irq: the index of irq list of MUIC device. 36 * @name: the name of irq. 37 * @virq: the virtual irq to use irq domain 38 */ 39 struct max14577_muic_irq { 40 unsigned int irq; 41 const char *name; 42 unsigned int virq; 43 }; 44 45 static struct max14577_muic_irq max14577_muic_irqs[] = { 46 { MAX14577_IRQ_INT1_ADC, "muic-ADC" }, 47 { MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" }, 48 { MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" }, 49 { MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, 50 { MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" }, 51 { MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, 52 { MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" }, 53 { MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, 54 }; 55 56 static struct max14577_muic_irq max77836_muic_irqs[] = { 57 { MAX14577_IRQ_INT1_ADC, "muic-ADC" }, 58 { MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" }, 59 { MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" }, 60 { MAX77836_IRQ_INT1_ADC1K, "muic-ADC1K" }, 61 { MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, 62 { MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" }, 63 { MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, 64 { MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" }, 65 { MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, 66 { MAX77836_IRQ_INT2_VIDRM, "muic-VIDRM" }, 67 }; 68 69 struct max14577_muic_info { 70 struct device *dev; 71 struct max14577 *max14577; 72 struct extcon_dev *edev; 73 int prev_cable_type; 74 int prev_chg_type; 75 u8 status[MAX14577_MUIC_STATUS_END]; 76 77 struct max14577_muic_irq *muic_irqs; 78 unsigned int muic_irqs_num; 79 bool irq_adc; 80 bool irq_chg; 81 struct work_struct irq_work; 82 struct mutex mutex; 83 84 /* 85 * Use delayed workqueue to detect cable state and then 86 * notify cable state to notifiee/platform through uevent. 87 * After completing the booting of platform, the extcon provider 88 * driver should notify cable state to upper layer. 89 */ 90 struct delayed_work wq_detcable; 91 92 /* 93 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB 94 * h/w path of COMP2/COMN1 on CONTROL1 register. 95 */ 96 int path_usb; 97 int path_uart; 98 }; 99 100 enum max14577_muic_cable_group { 101 MAX14577_CABLE_GROUP_ADC = 0, 102 MAX14577_CABLE_GROUP_CHG, 103 }; 104 105 /* Define supported accessory type */ 106 enum max14577_muic_acc_type { 107 MAX14577_MUIC_ADC_GROUND = 0x0, 108 MAX14577_MUIC_ADC_SEND_END_BUTTON, 109 MAX14577_MUIC_ADC_REMOTE_S1_BUTTON, 110 MAX14577_MUIC_ADC_REMOTE_S2_BUTTON, 111 MAX14577_MUIC_ADC_REMOTE_S3_BUTTON, 112 MAX14577_MUIC_ADC_REMOTE_S4_BUTTON, 113 MAX14577_MUIC_ADC_REMOTE_S5_BUTTON, 114 MAX14577_MUIC_ADC_REMOTE_S6_BUTTON, 115 MAX14577_MUIC_ADC_REMOTE_S7_BUTTON, 116 MAX14577_MUIC_ADC_REMOTE_S8_BUTTON, 117 MAX14577_MUIC_ADC_REMOTE_S9_BUTTON, 118 MAX14577_MUIC_ADC_REMOTE_S10_BUTTON, 119 MAX14577_MUIC_ADC_REMOTE_S11_BUTTON, 120 MAX14577_MUIC_ADC_REMOTE_S12_BUTTON, 121 MAX14577_MUIC_ADC_RESERVED_ACC_1, 122 MAX14577_MUIC_ADC_RESERVED_ACC_2, 123 MAX14577_MUIC_ADC_RESERVED_ACC_3, 124 MAX14577_MUIC_ADC_RESERVED_ACC_4, 125 MAX14577_MUIC_ADC_RESERVED_ACC_5, 126 MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2, 127 MAX14577_MUIC_ADC_PHONE_POWERED_DEV, 128 MAX14577_MUIC_ADC_TTY_CONVERTER, 129 MAX14577_MUIC_ADC_UART_CABLE, 130 MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG, 131 MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF, 132 MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON, 133 MAX14577_MUIC_ADC_AV_CABLE_NOLOAD, 134 MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG, 135 MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF, 136 MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON, 137 MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1, /* with Remote and Simple Ctrl */ 138 MAX14577_MUIC_ADC_OPEN, 139 }; 140 141 static const unsigned int max14577_extcon_cable[] = { 142 EXTCON_USB, 143 EXTCON_CHG_USB_SDP, 144 EXTCON_CHG_USB_DCP, 145 EXTCON_CHG_USB_FAST, 146 EXTCON_CHG_USB_SLOW, 147 EXTCON_CHG_USB_CDP, 148 EXTCON_JIG, 149 EXTCON_NONE, 150 }; 151 152 /* 153 * max14577_muic_set_debounce_time - Set the debounce time of ADC 154 * @info: the instance including private data of max14577 MUIC 155 * @time: the debounce time of ADC 156 */ 157 static int max14577_muic_set_debounce_time(struct max14577_muic_info *info, 158 enum max14577_muic_adc_debounce_time time) 159 { 160 u8 ret; 161 162 switch (time) { 163 case ADC_DEBOUNCE_TIME_5MS: 164 case ADC_DEBOUNCE_TIME_10MS: 165 case ADC_DEBOUNCE_TIME_25MS: 166 case ADC_DEBOUNCE_TIME_38_62MS: 167 ret = max14577_update_reg(info->max14577->regmap, 168 MAX14577_MUIC_REG_CONTROL3, 169 CTRL3_ADCDBSET_MASK, 170 time << CTRL3_ADCDBSET_SHIFT); 171 if (ret) { 172 dev_err(info->dev, "failed to set ADC debounce time\n"); 173 return ret; 174 } 175 break; 176 default: 177 dev_err(info->dev, "invalid ADC debounce time\n"); 178 return -EINVAL; 179 } 180 181 return 0; 182 }; 183 184 /* 185 * max14577_muic_set_path - Set hardware line according to attached cable 186 * @info: the instance including private data of max14577 MUIC 187 * @value: the path according to attached cable 188 * @attached: the state of cable (true:attached, false:detached) 189 * 190 * The max14577 MUIC device share outside H/W line among a varity of cables 191 * so, this function set internal path of H/W line according to the type of 192 * attached cable. 193 */ 194 static int max14577_muic_set_path(struct max14577_muic_info *info, 195 u8 val, bool attached) 196 { 197 u8 ctrl1, ctrl2 = 0; 198 int ret; 199 200 /* Set open state to path before changing hw path */ 201 ret = max14577_update_reg(info->max14577->regmap, 202 MAX14577_MUIC_REG_CONTROL1, 203 CLEAR_IDBEN_MICEN_MASK, CTRL1_SW_OPEN); 204 if (ret < 0) { 205 dev_err(info->dev, "failed to update MUIC register\n"); 206 return ret; 207 } 208 209 if (attached) 210 ctrl1 = val; 211 else 212 ctrl1 = CTRL1_SW_OPEN; 213 214 ret = max14577_update_reg(info->max14577->regmap, 215 MAX14577_MUIC_REG_CONTROL1, 216 CLEAR_IDBEN_MICEN_MASK, ctrl1); 217 if (ret < 0) { 218 dev_err(info->dev, "failed to update MUIC register\n"); 219 return ret; 220 } 221 222 if (attached) 223 ctrl2 |= CTRL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ 224 else 225 ctrl2 |= CTRL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ 226 227 ret = max14577_update_reg(info->max14577->regmap, 228 MAX14577_REG_CONTROL2, 229 CTRL2_LOWPWR_MASK | CTRL2_CPEN_MASK, ctrl2); 230 if (ret < 0) { 231 dev_err(info->dev, "failed to update MUIC register\n"); 232 return ret; 233 } 234 235 dev_dbg(info->dev, 236 "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", 237 ctrl1, ctrl2, attached ? "attached" : "detached"); 238 239 return 0; 240 } 241 242 /* 243 * max14577_muic_get_cable_type - Return cable type and check cable state 244 * @info: the instance including private data of max14577 MUIC 245 * @group: the path according to attached cable 246 * @attached: store cable state and return 247 * 248 * This function check the cable state either attached or detached, 249 * and then divide precise type of cable according to cable group. 250 * - max14577_CABLE_GROUP_ADC 251 * - max14577_CABLE_GROUP_CHG 252 */ 253 static int max14577_muic_get_cable_type(struct max14577_muic_info *info, 254 enum max14577_muic_cable_group group, bool *attached) 255 { 256 int cable_type = 0; 257 int adc; 258 int chg_type; 259 260 switch (group) { 261 case MAX14577_CABLE_GROUP_ADC: 262 /* 263 * Read ADC value to check cable type and decide cable state 264 * according to cable type 265 */ 266 adc = info->status[MAX14577_MUIC_STATUS1] & STATUS1_ADC_MASK; 267 adc >>= STATUS1_ADC_SHIFT; 268 269 /* 270 * Check current cable state/cable type and store cable type 271 * (info->prev_cable_type) for handling cable when cable is 272 * detached. 273 */ 274 if (adc == MAX14577_MUIC_ADC_OPEN) { 275 *attached = false; 276 277 cable_type = info->prev_cable_type; 278 info->prev_cable_type = MAX14577_MUIC_ADC_OPEN; 279 } else { 280 *attached = true; 281 282 cable_type = info->prev_cable_type = adc; 283 } 284 break; 285 case MAX14577_CABLE_GROUP_CHG: 286 /* 287 * Read charger type to check cable type and decide cable state 288 * according to type of charger cable. 289 */ 290 chg_type = info->status[MAX14577_MUIC_STATUS2] & 291 STATUS2_CHGTYP_MASK; 292 chg_type >>= STATUS2_CHGTYP_SHIFT; 293 294 if (chg_type == MAX14577_CHARGER_TYPE_NONE) { 295 *attached = false; 296 297 cable_type = info->prev_chg_type; 298 info->prev_chg_type = MAX14577_CHARGER_TYPE_NONE; 299 } else { 300 *attached = true; 301 302 /* 303 * Check current cable state/cable type and store cable 304 * type(info->prev_chg_type) for handling cable when 305 * charger cable is detached. 306 */ 307 cable_type = info->prev_chg_type = chg_type; 308 } 309 310 break; 311 default: 312 dev_err(info->dev, "Unknown cable group (%d)\n", group); 313 cable_type = -EINVAL; 314 break; 315 } 316 317 return cable_type; 318 } 319 320 static int max14577_muic_jig_handler(struct max14577_muic_info *info, 321 int cable_type, bool attached) 322 { 323 int ret = 0; 324 u8 path = CTRL1_SW_OPEN; 325 326 dev_dbg(info->dev, 327 "external connector is %s (adc:0x%02x)\n", 328 attached ? "attached" : "detached", cable_type); 329 330 switch (cable_type) { 331 case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */ 332 case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */ 333 /* PATH:AP_USB */ 334 path = CTRL1_SW_USB; 335 break; 336 case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */ 337 /* PATH:AP_UART */ 338 path = CTRL1_SW_UART; 339 break; 340 default: 341 dev_err(info->dev, "failed to detect %s jig cable\n", 342 attached ? "attached" : "detached"); 343 return -EINVAL; 344 } 345 346 ret = max14577_muic_set_path(info, path, attached); 347 if (ret < 0) 348 return ret; 349 350 extcon_set_state_sync(info->edev, EXTCON_JIG, attached); 351 352 return 0; 353 } 354 355 static int max14577_muic_adc_handler(struct max14577_muic_info *info) 356 { 357 int cable_type; 358 bool attached; 359 int ret = 0; 360 361 /* Check accessory state which is either detached or attached */ 362 cable_type = max14577_muic_get_cable_type(info, 363 MAX14577_CABLE_GROUP_ADC, &attached); 364 365 dev_dbg(info->dev, 366 "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", 367 attached ? "attached" : "detached", cable_type, 368 info->prev_cable_type); 369 370 switch (cable_type) { 371 case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: 372 case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: 373 case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: 374 /* JIG */ 375 ret = max14577_muic_jig_handler(info, cable_type, attached); 376 if (ret < 0) 377 return ret; 378 break; 379 case MAX14577_MUIC_ADC_GROUND: 380 case MAX14577_MUIC_ADC_SEND_END_BUTTON: 381 case MAX14577_MUIC_ADC_REMOTE_S1_BUTTON: 382 case MAX14577_MUIC_ADC_REMOTE_S2_BUTTON: 383 case MAX14577_MUIC_ADC_REMOTE_S3_BUTTON: 384 case MAX14577_MUIC_ADC_REMOTE_S4_BUTTON: 385 case MAX14577_MUIC_ADC_REMOTE_S5_BUTTON: 386 case MAX14577_MUIC_ADC_REMOTE_S6_BUTTON: 387 case MAX14577_MUIC_ADC_REMOTE_S7_BUTTON: 388 case MAX14577_MUIC_ADC_REMOTE_S8_BUTTON: 389 case MAX14577_MUIC_ADC_REMOTE_S9_BUTTON: 390 case MAX14577_MUIC_ADC_REMOTE_S10_BUTTON: 391 case MAX14577_MUIC_ADC_REMOTE_S11_BUTTON: 392 case MAX14577_MUIC_ADC_REMOTE_S12_BUTTON: 393 case MAX14577_MUIC_ADC_RESERVED_ACC_1: 394 case MAX14577_MUIC_ADC_RESERVED_ACC_2: 395 case MAX14577_MUIC_ADC_RESERVED_ACC_3: 396 case MAX14577_MUIC_ADC_RESERVED_ACC_4: 397 case MAX14577_MUIC_ADC_RESERVED_ACC_5: 398 case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2: 399 case MAX14577_MUIC_ADC_PHONE_POWERED_DEV: 400 case MAX14577_MUIC_ADC_TTY_CONVERTER: 401 case MAX14577_MUIC_ADC_UART_CABLE: 402 case MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG: 403 case MAX14577_MUIC_ADC_AV_CABLE_NOLOAD: 404 case MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG: 405 case MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON: 406 case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1: 407 /* 408 * This accessory isn't used in general case if it is specially 409 * needed to detect additional accessory, should implement 410 * proper operation when this accessory is attached/detached. 411 */ 412 dev_info(info->dev, 413 "accessory is %s but it isn't used (adc:0x%x)\n", 414 attached ? "attached" : "detached", cable_type); 415 return -EAGAIN; 416 default: 417 dev_err(info->dev, 418 "failed to detect %s accessory (adc:0x%x)\n", 419 attached ? "attached" : "detached", cable_type); 420 return -EINVAL; 421 } 422 423 return 0; 424 } 425 426 static int max14577_muic_chg_handler(struct max14577_muic_info *info) 427 { 428 int chg_type; 429 bool attached; 430 int ret = 0; 431 432 chg_type = max14577_muic_get_cable_type(info, 433 MAX14577_CABLE_GROUP_CHG, &attached); 434 435 dev_dbg(info->dev, 436 "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", 437 attached ? "attached" : "detached", 438 chg_type, info->prev_chg_type); 439 440 switch (chg_type) { 441 case MAX14577_CHARGER_TYPE_USB: 442 /* PATH:AP_USB */ 443 ret = max14577_muic_set_path(info, info->path_usb, attached); 444 if (ret < 0) 445 return ret; 446 447 extcon_set_state_sync(info->edev, EXTCON_USB, attached); 448 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, 449 attached); 450 break; 451 case MAX14577_CHARGER_TYPE_DEDICATED_CHG: 452 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, 453 attached); 454 break; 455 case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT: 456 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, 457 attached); 458 break; 459 case MAX14577_CHARGER_TYPE_SPECIAL_500MA: 460 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, 461 attached); 462 break; 463 case MAX14577_CHARGER_TYPE_SPECIAL_1A: 464 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, 465 attached); 466 break; 467 case MAX14577_CHARGER_TYPE_NONE: 468 case MAX14577_CHARGER_TYPE_DEAD_BATTERY: 469 break; 470 default: 471 dev_err(info->dev, 472 "failed to detect %s accessory (chg_type:0x%x)\n", 473 attached ? "attached" : "detached", chg_type); 474 return -EINVAL; 475 } 476 477 return 0; 478 } 479 480 static void max14577_muic_irq_work(struct work_struct *work) 481 { 482 struct max14577_muic_info *info = container_of(work, 483 struct max14577_muic_info, irq_work); 484 int ret = 0; 485 486 if (!info->edev) 487 return; 488 489 mutex_lock(&info->mutex); 490 491 ret = max14577_bulk_read(info->max14577->regmap, 492 MAX14577_MUIC_REG_STATUS1, info->status, 2); 493 if (ret) { 494 dev_err(info->dev, "failed to read MUIC register\n"); 495 mutex_unlock(&info->mutex); 496 return; 497 } 498 499 if (info->irq_adc) { 500 ret = max14577_muic_adc_handler(info); 501 info->irq_adc = false; 502 } 503 if (info->irq_chg) { 504 ret = max14577_muic_chg_handler(info); 505 info->irq_chg = false; 506 } 507 508 if (ret < 0) 509 dev_err(info->dev, "failed to handle MUIC interrupt\n"); 510 511 mutex_unlock(&info->mutex); 512 } 513 514 /* 515 * Sets irq_adc or irq_chg in max14577_muic_info and returns 1. 516 * Returns 0 if irq_type does not match registered IRQ for this device type. 517 */ 518 static int max14577_parse_irq(struct max14577_muic_info *info, int irq_type) 519 { 520 switch (irq_type) { 521 case MAX14577_IRQ_INT1_ADC: 522 case MAX14577_IRQ_INT1_ADCLOW: 523 case MAX14577_IRQ_INT1_ADCERR: 524 /* 525 * Handle all of accessory except for 526 * type of charger accessory. 527 */ 528 info->irq_adc = true; 529 return 1; 530 case MAX14577_IRQ_INT2_CHGTYP: 531 case MAX14577_IRQ_INT2_CHGDETRUN: 532 case MAX14577_IRQ_INT2_DCDTMR: 533 case MAX14577_IRQ_INT2_DBCHG: 534 case MAX14577_IRQ_INT2_VBVOLT: 535 /* Handle charger accessory */ 536 info->irq_chg = true; 537 return 1; 538 default: 539 return 0; 540 } 541 } 542 543 /* 544 * Sets irq_adc or irq_chg in max14577_muic_info and returns 1. 545 * Returns 0 if irq_type does not match registered IRQ for this device type. 546 */ 547 static int max77836_parse_irq(struct max14577_muic_info *info, int irq_type) 548 { 549 /* First check common max14577 interrupts */ 550 if (max14577_parse_irq(info, irq_type)) 551 return 1; 552 553 switch (irq_type) { 554 case MAX77836_IRQ_INT1_ADC1K: 555 info->irq_adc = true; 556 return 1; 557 case MAX77836_IRQ_INT2_VIDRM: 558 /* Handle charger accessory */ 559 info->irq_chg = true; 560 return 1; 561 default: 562 return 0; 563 } 564 } 565 566 static irqreturn_t max14577_muic_irq_handler(int irq, void *data) 567 { 568 struct max14577_muic_info *info = data; 569 int i, irq_type = -1; 570 bool irq_parsed; 571 572 /* 573 * We may be called multiple times for different nested IRQ-s. 574 * Including changes in INT1_ADC and INT2_CGHTYP at once. 575 * However we only need to know whether it was ADC, charger 576 * or both interrupts so decode IRQ and turn on proper flags. 577 */ 578 for (i = 0; i < info->muic_irqs_num; i++) 579 if (irq == info->muic_irqs[i].virq) 580 irq_type = info->muic_irqs[i].irq; 581 582 switch (info->max14577->dev_type) { 583 case MAXIM_DEVICE_TYPE_MAX77836: 584 irq_parsed = max77836_parse_irq(info, irq_type); 585 break; 586 case MAXIM_DEVICE_TYPE_MAX14577: 587 default: 588 irq_parsed = max14577_parse_irq(info, irq_type); 589 break; 590 } 591 592 if (!irq_parsed) { 593 dev_err(info->dev, "muic interrupt: irq %d occurred, skipped\n", 594 irq_type); 595 return IRQ_HANDLED; 596 } 597 schedule_work(&info->irq_work); 598 599 return IRQ_HANDLED; 600 } 601 602 static int max14577_muic_detect_accessory(struct max14577_muic_info *info) 603 { 604 int ret = 0; 605 int adc; 606 int chg_type; 607 bool attached; 608 609 mutex_lock(&info->mutex); 610 611 /* Read STATUSx register to detect accessory */ 612 ret = max14577_bulk_read(info->max14577->regmap, 613 MAX14577_MUIC_REG_STATUS1, info->status, 2); 614 if (ret) { 615 dev_err(info->dev, "failed to read MUIC register\n"); 616 mutex_unlock(&info->mutex); 617 return ret; 618 } 619 620 adc = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_ADC, 621 &attached); 622 if (attached && adc != MAX14577_MUIC_ADC_OPEN) { 623 ret = max14577_muic_adc_handler(info); 624 if (ret < 0) { 625 dev_err(info->dev, "Cannot detect accessory\n"); 626 mutex_unlock(&info->mutex); 627 return ret; 628 } 629 } 630 631 chg_type = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_CHG, 632 &attached); 633 if (attached && chg_type != MAX14577_CHARGER_TYPE_NONE) { 634 ret = max14577_muic_chg_handler(info); 635 if (ret < 0) { 636 dev_err(info->dev, "Cannot detect charger accessory\n"); 637 mutex_unlock(&info->mutex); 638 return ret; 639 } 640 } 641 642 mutex_unlock(&info->mutex); 643 644 return 0; 645 } 646 647 static void max14577_muic_detect_cable_wq(struct work_struct *work) 648 { 649 struct max14577_muic_info *info = container_of(to_delayed_work(work), 650 struct max14577_muic_info, wq_detcable); 651 652 max14577_muic_detect_accessory(info); 653 } 654 655 static int max14577_muic_probe(struct platform_device *pdev) 656 { 657 struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent); 658 struct max14577_muic_info *info; 659 int delay_jiffies; 660 int cable_type; 661 bool attached; 662 int ret; 663 int i; 664 u8 id; 665 666 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); 667 if (!info) 668 return -ENOMEM; 669 670 info->dev = &pdev->dev; 671 info->max14577 = max14577; 672 673 platform_set_drvdata(pdev, info); 674 mutex_init(&info->mutex); 675 676 INIT_WORK(&info->irq_work, max14577_muic_irq_work); 677 678 switch (max14577->dev_type) { 679 case MAXIM_DEVICE_TYPE_MAX77836: 680 info->muic_irqs = max77836_muic_irqs; 681 info->muic_irqs_num = ARRAY_SIZE(max77836_muic_irqs); 682 break; 683 case MAXIM_DEVICE_TYPE_MAX14577: 684 default: 685 info->muic_irqs = max14577_muic_irqs; 686 info->muic_irqs_num = ARRAY_SIZE(max14577_muic_irqs); 687 } 688 689 /* Support irq domain for max14577 MUIC device */ 690 for (i = 0; i < info->muic_irqs_num; i++) { 691 struct max14577_muic_irq *muic_irq = &info->muic_irqs[i]; 692 int virq = 0; 693 694 virq = regmap_irq_get_virq(max14577->irq_data, muic_irq->irq); 695 if (virq <= 0) 696 return -EINVAL; 697 muic_irq->virq = virq; 698 699 ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, 700 max14577_muic_irq_handler, 701 IRQF_NO_SUSPEND, 702 muic_irq->name, info); 703 if (ret) { 704 dev_err(&pdev->dev, 705 "failed: irq request (IRQ: %d, error :%d)\n", 706 muic_irq->irq, ret); 707 return ret; 708 } 709 } 710 711 /* Initialize extcon device */ 712 info->edev = devm_extcon_dev_allocate(&pdev->dev, 713 max14577_extcon_cable); 714 if (IS_ERR(info->edev)) { 715 dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); 716 return -ENOMEM; 717 } 718 719 ret = devm_extcon_dev_register(&pdev->dev, info->edev); 720 if (ret) { 721 dev_err(&pdev->dev, "failed to register extcon device\n"); 722 return ret; 723 } 724 725 /* Default h/w line path */ 726 info->path_usb = CTRL1_SW_USB; 727 info->path_uart = CTRL1_SW_UART; 728 delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); 729 730 /* Set initial path for UART when JIG is connected to get serial logs */ 731 ret = max14577_bulk_read(info->max14577->regmap, 732 MAX14577_MUIC_REG_STATUS1, info->status, 2); 733 if (ret) { 734 dev_err(info->dev, "Cannot read STATUS registers\n"); 735 return ret; 736 } 737 cable_type = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_ADC, 738 &attached); 739 if (attached && cable_type == MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF) 740 max14577_muic_set_path(info, info->path_uart, true); 741 742 /* Check revision number of MUIC device*/ 743 ret = max14577_read_reg(info->max14577->regmap, 744 MAX14577_REG_DEVICEID, &id); 745 if (ret < 0) { 746 dev_err(&pdev->dev, "failed to read revision number\n"); 747 return ret; 748 } 749 dev_info(info->dev, "device ID : 0x%x\n", id); 750 751 /* Set ADC debounce time */ 752 max14577_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); 753 754 /* 755 * Detect accessory after completing the initialization of platform 756 * 757 * - Use delayed workqueue to detect cable state and then 758 * notify cable state to notifiee/platform through uevent. 759 * After completing the booting of platform, the extcon provider 760 * driver should notify cable state to upper layer. 761 */ 762 INIT_DELAYED_WORK(&info->wq_detcable, max14577_muic_detect_cable_wq); 763 queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, 764 delay_jiffies); 765 766 return ret; 767 } 768 769 static int max14577_muic_remove(struct platform_device *pdev) 770 { 771 struct max14577_muic_info *info = platform_get_drvdata(pdev); 772 773 cancel_work_sync(&info->irq_work); 774 775 return 0; 776 } 777 778 static const struct platform_device_id max14577_muic_id[] = { 779 { "max14577-muic", MAXIM_DEVICE_TYPE_MAX14577, }, 780 { "max77836-muic", MAXIM_DEVICE_TYPE_MAX77836, }, 781 { } 782 }; 783 MODULE_DEVICE_TABLE(platform, max14577_muic_id); 784 785 static struct platform_driver max14577_muic_driver = { 786 .driver = { 787 .name = "max14577-muic", 788 }, 789 .probe = max14577_muic_probe, 790 .remove = max14577_muic_remove, 791 .id_table = max14577_muic_id, 792 }; 793 794 module_platform_driver(max14577_muic_driver); 795 796 MODULE_DESCRIPTION("Maxim 14577/77836 Extcon driver"); 797 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <krzk@kernel.org>"); 798 MODULE_LICENSE("GPL"); 799 MODULE_ALIAS("platform:extcon-max14577"); 800