1 /* 2 * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver 3 * 4 * Copyright (C) 2015 Intel Corporation 5 * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 */ 16 17 #include <linux/module.h> 18 #include <linux/kernel.h> 19 #include <linux/io.h> 20 #include <linux/slab.h> 21 #include <linux/interrupt.h> 22 #include <linux/platform_device.h> 23 #include <linux/property.h> 24 #include <linux/usb/phy.h> 25 #include <linux/notifier.h> 26 #include <linux/extcon.h> 27 #include <linux/regmap.h> 28 #include <linux/gpio.h> 29 #include <linux/gpio/consumer.h> 30 #include <linux/mfd/axp20x.h> 31 32 /* Power source status register */ 33 #define PS_STAT_VBUS_TRIGGER BIT(0) 34 #define PS_STAT_BAT_CHRG_DIR BIT(2) 35 #define PS_STAT_VBUS_ABOVE_VHOLD BIT(3) 36 #define PS_STAT_VBUS_VALID BIT(4) 37 #define PS_STAT_VBUS_PRESENT BIT(5) 38 39 /* BC module global register */ 40 #define BC_GLOBAL_RUN BIT(0) 41 #define BC_GLOBAL_DET_STAT BIT(2) 42 #define BC_GLOBAL_DBP_TOUT BIT(3) 43 #define BC_GLOBAL_VLGC_COM_SEL BIT(4) 44 #define BC_GLOBAL_DCD_TOUT_MASK (BIT(6)|BIT(5)) 45 #define BC_GLOBAL_DCD_TOUT_300MS 0 46 #define BC_GLOBAL_DCD_TOUT_100MS 1 47 #define BC_GLOBAL_DCD_TOUT_500MS 2 48 #define BC_GLOBAL_DCD_TOUT_900MS 3 49 #define BC_GLOBAL_DCD_DET_SEL BIT(7) 50 51 /* BC module vbus control and status register */ 52 #define VBUS_CNTL_DPDM_PD_EN BIT(4) 53 #define VBUS_CNTL_DPDM_FD_EN BIT(5) 54 #define VBUS_CNTL_FIRST_PO_STAT BIT(6) 55 56 /* BC USB status register */ 57 #define USB_STAT_BUS_STAT_MASK (BIT(3)|BIT(2)|BIT(1)|BIT(0)) 58 #define USB_STAT_BUS_STAT_SHIFT 0 59 #define USB_STAT_BUS_STAT_ATHD 0 60 #define USB_STAT_BUS_STAT_CONN 1 61 #define USB_STAT_BUS_STAT_SUSP 2 62 #define USB_STAT_BUS_STAT_CONF 3 63 #define USB_STAT_USB_SS_MODE BIT(4) 64 #define USB_STAT_DEAD_BAT_DET BIT(6) 65 #define USB_STAT_DBP_UNCFG BIT(7) 66 67 /* BC detect status register */ 68 #define DET_STAT_MASK (BIT(7)|BIT(6)|BIT(5)) 69 #define DET_STAT_SHIFT 5 70 #define DET_STAT_SDP 1 71 #define DET_STAT_CDP 2 72 #define DET_STAT_DCP 3 73 74 /* IRQ enable-1 register */ 75 #define PWRSRC_IRQ_CFG_MASK (BIT(4)|BIT(3)|BIT(2)) 76 77 /* IRQ enable-6 register */ 78 #define BC12_IRQ_CFG_MASK BIT(1) 79 80 enum axp288_extcon_reg { 81 AXP288_PS_STAT_REG = 0x00, 82 AXP288_PS_BOOT_REASON_REG = 0x02, 83 AXP288_BC_GLOBAL_REG = 0x2c, 84 AXP288_BC_VBUS_CNTL_REG = 0x2d, 85 AXP288_BC_USB_STAT_REG = 0x2e, 86 AXP288_BC_DET_STAT_REG = 0x2f, 87 AXP288_PWRSRC_IRQ_CFG_REG = 0x40, 88 AXP288_BC12_IRQ_CFG_REG = 0x45, 89 }; 90 91 enum axp288_mux_select { 92 EXTCON_GPIO_MUX_SEL_PMIC = 0, 93 EXTCON_GPIO_MUX_SEL_SOC, 94 }; 95 96 enum axp288_extcon_irq { 97 VBUS_FALLING_IRQ = 0, 98 VBUS_RISING_IRQ, 99 MV_CHNG_IRQ, 100 BC_USB_CHNG_IRQ, 101 EXTCON_IRQ_END, 102 }; 103 104 static const unsigned int axp288_extcon_cables[] = { 105 EXTCON_CHG_USB_SDP, 106 EXTCON_CHG_USB_CDP, 107 EXTCON_CHG_USB_DCP, 108 EXTCON_NONE, 109 }; 110 111 struct axp288_extcon_info { 112 struct device *dev; 113 struct regmap *regmap; 114 struct regmap_irq_chip_data *regmap_irqc; 115 struct axp288_extcon_pdata *pdata; 116 int irq[EXTCON_IRQ_END]; 117 struct extcon_dev *edev; 118 struct notifier_block extcon_nb; 119 struct usb_phy *otg; 120 }; 121 122 /* Power up/down reason string array */ 123 static char *axp288_pwr_up_down_info[] = { 124 "Last wake caused by user pressing the power button", 125 "Last wake caused by a charger insertion", 126 "Last wake caused by a battery insertion", 127 "Last wake caused by SOC initiated global reset", 128 "Last wake caused by cold reset", 129 "Last shutdown caused by PMIC UVLO threshold", 130 "Last shutdown caused by SOC initiated cold off", 131 "Last shutdown caused by user pressing the power button", 132 NULL, 133 }; 134 135 /* 136 * Decode and log the given "reset source indicator" (rsi) 137 * register and then clear it. 138 */ 139 static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) 140 { 141 char **rsi; 142 unsigned int val, i, clear_mask = 0; 143 int ret; 144 145 ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val); 146 for (i = 0, rsi = axp288_pwr_up_down_info; *rsi; rsi++, i++) { 147 if (val & BIT(i)) { 148 dev_dbg(info->dev, "%s\n", *rsi); 149 clear_mask |= BIT(i); 150 } 151 } 152 153 /* Clear the register value for next reboot (write 1 to clear bit) */ 154 regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask); 155 } 156 157 static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) 158 { 159 static bool notify_otg, notify_charger; 160 static unsigned int cable; 161 int ret, stat, cfg, pwr_stat; 162 u8 chrg_type; 163 bool vbus_attach = false; 164 165 ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat); 166 if (ret < 0) { 167 dev_err(info->dev, "failed to read vbus status\n"); 168 return ret; 169 } 170 171 vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT); 172 if (!vbus_attach) 173 goto notify_otg; 174 175 /* Check charger detection completion status */ 176 ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg); 177 if (ret < 0) 178 goto dev_det_ret; 179 if (cfg & BC_GLOBAL_DET_STAT) { 180 dev_dbg(info->dev, "can't complete the charger detection\n"); 181 goto dev_det_ret; 182 } 183 184 ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat); 185 if (ret < 0) 186 goto dev_det_ret; 187 188 chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT; 189 190 switch (chrg_type) { 191 case DET_STAT_SDP: 192 dev_dbg(info->dev, "sdp cable is connecetd\n"); 193 notify_otg = true; 194 notify_charger = true; 195 cable = EXTCON_CHG_USB_SDP; 196 break; 197 case DET_STAT_CDP: 198 dev_dbg(info->dev, "cdp cable is connecetd\n"); 199 notify_otg = true; 200 notify_charger = true; 201 cable = EXTCON_CHG_USB_CDP; 202 break; 203 case DET_STAT_DCP: 204 dev_dbg(info->dev, "dcp cable is connecetd\n"); 205 notify_charger = true; 206 cable = EXTCON_CHG_USB_DCP; 207 break; 208 default: 209 dev_warn(info->dev, 210 "disconnect or unknown or ID event\n"); 211 } 212 213 notify_otg: 214 if (notify_otg) { 215 /* 216 * If VBUS is absent Connect D+/D- lines to PMIC for BC 217 * detection. Else connect them to SOC for USB communication. 218 */ 219 if (info->pdata->gpio_mux_cntl) 220 gpiod_set_value(info->pdata->gpio_mux_cntl, 221 vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC 222 : EXTCON_GPIO_MUX_SEL_PMIC); 223 224 atomic_notifier_call_chain(&info->otg->notifier, 225 vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); 226 } 227 228 if (notify_charger) 229 extcon_set_cable_state_(info->edev, cable, vbus_attach); 230 231 /* Clear the flags on disconnect event */ 232 if (!vbus_attach) 233 notify_otg = notify_charger = false; 234 235 return 0; 236 237 dev_det_ret: 238 if (ret < 0) 239 dev_err(info->dev, "failed to detect BC Mod\n"); 240 241 return ret; 242 } 243 244 static irqreturn_t axp288_extcon_isr(int irq, void *data) 245 { 246 struct axp288_extcon_info *info = data; 247 int ret; 248 249 ret = axp288_handle_chrg_det_event(info); 250 if (ret < 0) 251 dev_err(info->dev, "failed to handle the interrupt\n"); 252 253 return IRQ_HANDLED; 254 } 255 256 static void axp288_extcon_enable_irq(struct axp288_extcon_info *info) 257 { 258 /* Unmask VBUS interrupt */ 259 regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG, 260 PWRSRC_IRQ_CFG_MASK); 261 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, 262 BC_GLOBAL_RUN, 0); 263 /* Unmask the BC1.2 complete interrupts */ 264 regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK); 265 /* Enable the charger detection logic */ 266 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, 267 BC_GLOBAL_RUN, BC_GLOBAL_RUN); 268 } 269 270 static int axp288_extcon_probe(struct platform_device *pdev) 271 { 272 struct axp288_extcon_info *info; 273 struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); 274 int ret, i, pirq, gpio; 275 276 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); 277 if (!info) 278 return -ENOMEM; 279 280 info->dev = &pdev->dev; 281 info->regmap = axp20x->regmap; 282 info->regmap_irqc = axp20x->regmap_irqc; 283 info->pdata = pdev->dev.platform_data; 284 285 if (!info->pdata) { 286 /* Try ACPI provided pdata via device properties */ 287 if (!device_property_present(&pdev->dev, 288 "axp288_extcon_data\n")) 289 dev_err(&pdev->dev, "failed to get platform data\n"); 290 return -ENODEV; 291 } 292 platform_set_drvdata(pdev, info); 293 294 axp288_extcon_log_rsi(info); 295 296 /* Initialize extcon device */ 297 info->edev = devm_extcon_dev_allocate(&pdev->dev, 298 axp288_extcon_cables); 299 if (IS_ERR(info->edev)) { 300 dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); 301 return PTR_ERR(info->edev); 302 } 303 304 /* Register extcon device */ 305 ret = devm_extcon_dev_register(&pdev->dev, info->edev); 306 if (ret) { 307 dev_err(&pdev->dev, "failed to register extcon device\n"); 308 return ret; 309 } 310 311 /* Get otg transceiver phy */ 312 info->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); 313 if (IS_ERR(info->otg)) { 314 dev_err(&pdev->dev, "failed to get otg transceiver\n"); 315 return PTR_ERR(info->otg); 316 } 317 318 /* Set up gpio control for USB Mux */ 319 if (info->pdata->gpio_mux_cntl) { 320 gpio = desc_to_gpio(info->pdata->gpio_mux_cntl); 321 ret = devm_gpio_request(&pdev->dev, gpio, "USB_MUX"); 322 if (ret < 0) { 323 dev_err(&pdev->dev, 324 "failed to request the gpio=%d\n", gpio); 325 return ret; 326 } 327 gpiod_direction_output(info->pdata->gpio_mux_cntl, 328 EXTCON_GPIO_MUX_SEL_PMIC); 329 } 330 331 for (i = 0; i < EXTCON_IRQ_END; i++) { 332 pirq = platform_get_irq(pdev, i); 333 info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); 334 if (info->irq[i] < 0) { 335 dev_err(&pdev->dev, 336 "failed to get virtual interrupt=%d\n", pirq); 337 ret = info->irq[i]; 338 return ret; 339 } 340 341 ret = devm_request_threaded_irq(&pdev->dev, info->irq[i], 342 NULL, axp288_extcon_isr, 343 IRQF_ONESHOT | IRQF_NO_SUSPEND, 344 pdev->name, info); 345 if (ret) { 346 dev_err(&pdev->dev, "failed to request interrupt=%d\n", 347 info->irq[i]); 348 return ret; 349 } 350 } 351 352 /* Enable interrupts */ 353 axp288_extcon_enable_irq(info); 354 355 return 0; 356 } 357 358 static struct platform_driver axp288_extcon_driver = { 359 .probe = axp288_extcon_probe, 360 .driver = { 361 .name = "axp288_extcon", 362 }, 363 }; 364 module_platform_driver(axp288_extcon_driver); 365 366 MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>"); 367 MODULE_DESCRIPTION("X-Powers AXP288 extcon driver"); 368 MODULE_LICENSE("GPL v2"); 369