1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver 4 * 5 * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com> 6 * Copyright (C) 2015 Intel Corporation 7 * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com> 8 */ 9 10 #include <linux/acpi.h> 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 #include <linux/io.h> 14 #include <linux/slab.h> 15 #include <linux/interrupt.h> 16 #include <linux/platform_device.h> 17 #include <linux/property.h> 18 #include <linux/notifier.h> 19 #include <linux/extcon-provider.h> 20 #include <linux/regmap.h> 21 #include <linux/mfd/axp20x.h> 22 #include <linux/usb/role.h> 23 #include <linux/workqueue.h> 24 25 #include <asm/cpu_device_id.h> 26 #include <asm/intel-family.h> 27 28 /* Power source status register */ 29 #define PS_STAT_VBUS_TRIGGER BIT(0) 30 #define PS_STAT_BAT_CHRG_DIR BIT(2) 31 #define PS_STAT_VBUS_ABOVE_VHOLD BIT(3) 32 #define PS_STAT_VBUS_VALID BIT(4) 33 #define PS_STAT_VBUS_PRESENT BIT(5) 34 35 /* BC module global register */ 36 #define BC_GLOBAL_RUN BIT(0) 37 #define BC_GLOBAL_DET_STAT BIT(2) 38 #define BC_GLOBAL_DBP_TOUT BIT(3) 39 #define BC_GLOBAL_VLGC_COM_SEL BIT(4) 40 #define BC_GLOBAL_DCD_TOUT_MASK (BIT(6)|BIT(5)) 41 #define BC_GLOBAL_DCD_TOUT_300MS 0 42 #define BC_GLOBAL_DCD_TOUT_100MS 1 43 #define BC_GLOBAL_DCD_TOUT_500MS 2 44 #define BC_GLOBAL_DCD_TOUT_900MS 3 45 #define BC_GLOBAL_DCD_DET_SEL BIT(7) 46 47 /* BC module vbus control and status register */ 48 #define VBUS_CNTL_DPDM_PD_EN BIT(4) 49 #define VBUS_CNTL_DPDM_FD_EN BIT(5) 50 #define VBUS_CNTL_FIRST_PO_STAT BIT(6) 51 52 /* BC USB status register */ 53 #define USB_STAT_BUS_STAT_MASK (BIT(3)|BIT(2)|BIT(1)|BIT(0)) 54 #define USB_STAT_BUS_STAT_SHIFT 0 55 #define USB_STAT_BUS_STAT_ATHD 0 56 #define USB_STAT_BUS_STAT_CONN 1 57 #define USB_STAT_BUS_STAT_SUSP 2 58 #define USB_STAT_BUS_STAT_CONF 3 59 #define USB_STAT_USB_SS_MODE BIT(4) 60 #define USB_STAT_DEAD_BAT_DET BIT(6) 61 #define USB_STAT_DBP_UNCFG BIT(7) 62 63 /* BC detect status register */ 64 #define DET_STAT_MASK (BIT(7)|BIT(6)|BIT(5)) 65 #define DET_STAT_SHIFT 5 66 #define DET_STAT_SDP 1 67 #define DET_STAT_CDP 2 68 #define DET_STAT_DCP 3 69 70 enum axp288_extcon_reg { 71 AXP288_PS_STAT_REG = 0x00, 72 AXP288_PS_BOOT_REASON_REG = 0x02, 73 AXP288_BC_GLOBAL_REG = 0x2c, 74 AXP288_BC_VBUS_CNTL_REG = 0x2d, 75 AXP288_BC_USB_STAT_REG = 0x2e, 76 AXP288_BC_DET_STAT_REG = 0x2f, 77 }; 78 79 enum axp288_extcon_irq { 80 VBUS_FALLING_IRQ = 0, 81 VBUS_RISING_IRQ, 82 MV_CHNG_IRQ, 83 BC_USB_CHNG_IRQ, 84 EXTCON_IRQ_END, 85 }; 86 87 static const unsigned int axp288_extcon_cables[] = { 88 EXTCON_CHG_USB_SDP, 89 EXTCON_CHG_USB_CDP, 90 EXTCON_CHG_USB_DCP, 91 EXTCON_USB, 92 EXTCON_NONE, 93 }; 94 95 struct axp288_extcon_info { 96 struct device *dev; 97 struct regmap *regmap; 98 struct regmap_irq_chip_data *regmap_irqc; 99 struct usb_role_switch *role_sw; 100 struct work_struct role_work; 101 int irq[EXTCON_IRQ_END]; 102 struct extcon_dev *edev; 103 struct extcon_dev *id_extcon; 104 struct notifier_block id_nb; 105 unsigned int previous_cable; 106 bool vbus_attach; 107 }; 108 109 static const struct x86_cpu_id cherry_trail_cpu_ids[] = { 110 X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, NULL), 111 {} 112 }; 113 114 /* Power up/down reason string array */ 115 static const char * const axp288_pwr_up_down_info[] = { 116 "Last wake caused by user pressing the power button", 117 "Last wake caused by a charger insertion", 118 "Last wake caused by a battery insertion", 119 "Last wake caused by SOC initiated global reset", 120 "Last wake caused by cold reset", 121 "Last shutdown caused by PMIC UVLO threshold", 122 "Last shutdown caused by SOC initiated cold off", 123 "Last shutdown caused by user pressing the power button", 124 }; 125 126 /* 127 * Decode and log the given "reset source indicator" (rsi) 128 * register and then clear it. 129 */ 130 static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) 131 { 132 unsigned int val, i, clear_mask = 0; 133 unsigned long bits; 134 int ret; 135 136 ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val); 137 if (ret < 0) { 138 dev_err(info->dev, "failed to read reset source indicator\n"); 139 return; 140 } 141 142 bits = val & GENMASK(ARRAY_SIZE(axp288_pwr_up_down_info) - 1, 0); 143 for_each_set_bit(i, &bits, ARRAY_SIZE(axp288_pwr_up_down_info)) 144 dev_dbg(info->dev, "%s\n", axp288_pwr_up_down_info[i]); 145 clear_mask = bits; 146 147 /* Clear the register value for next reboot (write 1 to clear bit) */ 148 regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask); 149 } 150 151 /* 152 * The below code to control the USB role-switch on devices with an AXP288 153 * may seem out of place, but there are 2 reasons why this is the best place 154 * to control the USB role-switch on such devices: 155 * 1) On many devices the USB role is controlled by AML code, but the AML code 156 * only switches between the host and none roles, because of Windows not 157 * really using device mode. To make device mode work we need to toggle 158 * between the none/device roles based on Vbus presence, and this driver 159 * gets interrupts on Vbus insertion / removal. 160 * 2) In order for our BC1.2 charger detection to work properly the role 161 * mux must be properly set to device mode before we do the detection. 162 */ 163 164 /* Returns the id-pin value, note pulled low / false == host-mode */ 165 static bool axp288_get_id_pin(struct axp288_extcon_info *info) 166 { 167 enum usb_role role; 168 169 if (info->id_extcon) 170 return extcon_get_state(info->id_extcon, EXTCON_USB_HOST) <= 0; 171 172 /* We cannot access the id-pin, see what mode the AML code has set */ 173 role = usb_role_switch_get_role(info->role_sw); 174 return role != USB_ROLE_HOST; 175 } 176 177 static void axp288_usb_role_work(struct work_struct *work) 178 { 179 struct axp288_extcon_info *info = 180 container_of(work, struct axp288_extcon_info, role_work); 181 enum usb_role role; 182 bool id_pin; 183 int ret; 184 185 id_pin = axp288_get_id_pin(info); 186 if (!id_pin) 187 role = USB_ROLE_HOST; 188 else if (info->vbus_attach) 189 role = USB_ROLE_DEVICE; 190 else 191 role = USB_ROLE_NONE; 192 193 ret = usb_role_switch_set_role(info->role_sw, role); 194 if (ret) 195 dev_err(info->dev, "failed to set role: %d\n", ret); 196 } 197 198 static bool axp288_get_vbus_attach(struct axp288_extcon_info *info) 199 { 200 int ret, pwr_stat; 201 202 ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat); 203 if (ret < 0) { 204 dev_err(info->dev, "failed to read vbus status\n"); 205 return false; 206 } 207 208 return !!(pwr_stat & PS_STAT_VBUS_VALID); 209 } 210 211 static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) 212 { 213 int ret, stat, cfg; 214 u8 chrg_type; 215 unsigned int cable = info->previous_cable; 216 bool vbus_attach = false; 217 218 vbus_attach = axp288_get_vbus_attach(info); 219 if (!vbus_attach) 220 goto no_vbus; 221 222 /* Check charger detection completion status */ 223 ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg); 224 if (ret < 0) 225 goto dev_det_ret; 226 if (cfg & BC_GLOBAL_DET_STAT) { 227 dev_dbg(info->dev, "can't complete the charger detection\n"); 228 goto dev_det_ret; 229 } 230 231 ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat); 232 if (ret < 0) 233 goto dev_det_ret; 234 235 chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT; 236 237 switch (chrg_type) { 238 case DET_STAT_SDP: 239 dev_dbg(info->dev, "sdp cable is connected\n"); 240 cable = EXTCON_CHG_USB_SDP; 241 break; 242 case DET_STAT_CDP: 243 dev_dbg(info->dev, "cdp cable is connected\n"); 244 cable = EXTCON_CHG_USB_CDP; 245 break; 246 case DET_STAT_DCP: 247 dev_dbg(info->dev, "dcp cable is connected\n"); 248 cable = EXTCON_CHG_USB_DCP; 249 break; 250 default: 251 dev_warn(info->dev, "unknown (reserved) bc detect result\n"); 252 cable = EXTCON_CHG_USB_SDP; 253 } 254 255 no_vbus: 256 extcon_set_state_sync(info->edev, info->previous_cable, false); 257 if (info->previous_cable == EXTCON_CHG_USB_SDP) 258 extcon_set_state_sync(info->edev, EXTCON_USB, false); 259 260 if (vbus_attach) { 261 extcon_set_state_sync(info->edev, cable, vbus_attach); 262 if (cable == EXTCON_CHG_USB_SDP) 263 extcon_set_state_sync(info->edev, EXTCON_USB, 264 vbus_attach); 265 266 info->previous_cable = cable; 267 } 268 269 if (info->role_sw && info->vbus_attach != vbus_attach) { 270 info->vbus_attach = vbus_attach; 271 /* Setting the role can take a while */ 272 queue_work(system_long_wq, &info->role_work); 273 } 274 275 return 0; 276 277 dev_det_ret: 278 if (ret < 0) 279 dev_err(info->dev, "failed to detect BC Mod\n"); 280 281 return ret; 282 } 283 284 static int axp288_extcon_id_evt(struct notifier_block *nb, 285 unsigned long event, void *param) 286 { 287 struct axp288_extcon_info *info = 288 container_of(nb, struct axp288_extcon_info, id_nb); 289 290 /* We may not sleep and setting the role can take a while */ 291 queue_work(system_long_wq, &info->role_work); 292 293 return NOTIFY_OK; 294 } 295 296 static irqreturn_t axp288_extcon_isr(int irq, void *data) 297 { 298 struct axp288_extcon_info *info = data; 299 int ret; 300 301 ret = axp288_handle_chrg_det_event(info); 302 if (ret < 0) 303 dev_err(info->dev, "failed to handle the interrupt\n"); 304 305 return IRQ_HANDLED; 306 } 307 308 static void axp288_extcon_enable(struct axp288_extcon_info *info) 309 { 310 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, 311 BC_GLOBAL_RUN, 0); 312 /* Enable the charger detection logic */ 313 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, 314 BC_GLOBAL_RUN, BC_GLOBAL_RUN); 315 } 316 317 static void axp288_put_role_sw(void *data) 318 { 319 struct axp288_extcon_info *info = data; 320 321 cancel_work_sync(&info->role_work); 322 usb_role_switch_put(info->role_sw); 323 } 324 325 static int axp288_extcon_find_role_sw(struct axp288_extcon_info *info) 326 { 327 const struct software_node *swnode; 328 struct fwnode_handle *fwnode; 329 330 if (!x86_match_cpu(cherry_trail_cpu_ids)) 331 return 0; 332 333 swnode = software_node_find_by_name(NULL, "intel-xhci-usb-sw"); 334 if (!swnode) 335 return -EPROBE_DEFER; 336 337 fwnode = software_node_fwnode(swnode); 338 info->role_sw = usb_role_switch_find_by_fwnode(fwnode); 339 fwnode_handle_put(fwnode); 340 341 return info->role_sw ? 0 : -EPROBE_DEFER; 342 } 343 344 static int axp288_extcon_probe(struct platform_device *pdev) 345 { 346 struct axp288_extcon_info *info; 347 struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); 348 struct device *dev = &pdev->dev; 349 struct acpi_device *adev; 350 int ret, i, pirq; 351 352 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); 353 if (!info) 354 return -ENOMEM; 355 356 info->dev = &pdev->dev; 357 info->regmap = axp20x->regmap; 358 info->regmap_irqc = axp20x->regmap_irqc; 359 info->previous_cable = EXTCON_NONE; 360 INIT_WORK(&info->role_work, axp288_usb_role_work); 361 info->id_nb.notifier_call = axp288_extcon_id_evt; 362 363 platform_set_drvdata(pdev, info); 364 365 ret = axp288_extcon_find_role_sw(info); 366 if (ret) 367 return ret; 368 369 if (info->role_sw) { 370 ret = devm_add_action_or_reset(dev, axp288_put_role_sw, info); 371 if (ret) 372 return ret; 373 374 adev = acpi_dev_get_first_match_dev("INT3496", NULL, -1); 375 if (adev) { 376 info->id_extcon = extcon_get_extcon_dev(acpi_dev_name(adev)); 377 put_device(&adev->dev); 378 if (!info->id_extcon) 379 return -EPROBE_DEFER; 380 381 dev_info(dev, "controlling USB role\n"); 382 } else { 383 dev_info(dev, "controlling USB role based on Vbus presence\n"); 384 } 385 } 386 387 info->vbus_attach = axp288_get_vbus_attach(info); 388 389 axp288_extcon_log_rsi(info); 390 391 /* Initialize extcon device */ 392 info->edev = devm_extcon_dev_allocate(&pdev->dev, 393 axp288_extcon_cables); 394 if (IS_ERR(info->edev)) { 395 dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); 396 return PTR_ERR(info->edev); 397 } 398 399 /* Register extcon device */ 400 ret = devm_extcon_dev_register(&pdev->dev, info->edev); 401 if (ret) { 402 dev_err(&pdev->dev, "failed to register extcon device\n"); 403 return ret; 404 } 405 406 for (i = 0; i < EXTCON_IRQ_END; i++) { 407 pirq = platform_get_irq(pdev, i); 408 if (pirq < 0) 409 return pirq; 410 411 info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); 412 if (info->irq[i] < 0) { 413 dev_err(&pdev->dev, 414 "failed to get virtual interrupt=%d\n", pirq); 415 ret = info->irq[i]; 416 return ret; 417 } 418 419 ret = devm_request_threaded_irq(&pdev->dev, info->irq[i], 420 NULL, axp288_extcon_isr, 421 IRQF_ONESHOT | IRQF_NO_SUSPEND, 422 pdev->name, info); 423 if (ret) { 424 dev_err(&pdev->dev, "failed to request interrupt=%d\n", 425 info->irq[i]); 426 return ret; 427 } 428 } 429 430 if (info->id_extcon) { 431 ret = devm_extcon_register_notifier_all(dev, info->id_extcon, 432 &info->id_nb); 433 if (ret) 434 return ret; 435 } 436 437 /* Make sure the role-sw is set correctly before doing BC detection */ 438 if (info->role_sw) { 439 queue_work(system_long_wq, &info->role_work); 440 flush_work(&info->role_work); 441 } 442 443 /* Start charger cable type detection */ 444 axp288_extcon_enable(info); 445 446 device_init_wakeup(dev, true); 447 platform_set_drvdata(pdev, info); 448 449 return 0; 450 } 451 452 static int __maybe_unused axp288_extcon_suspend(struct device *dev) 453 { 454 struct axp288_extcon_info *info = dev_get_drvdata(dev); 455 456 if (device_may_wakeup(dev)) 457 enable_irq_wake(info->irq[VBUS_RISING_IRQ]); 458 459 return 0; 460 } 461 462 static int __maybe_unused axp288_extcon_resume(struct device *dev) 463 { 464 struct axp288_extcon_info *info = dev_get_drvdata(dev); 465 466 /* 467 * Wakeup when a charger is connected to do charger-type 468 * connection and generate an extcon event which makes the 469 * axp288 charger driver set the input current limit. 470 */ 471 if (device_may_wakeup(dev)) 472 disable_irq_wake(info->irq[VBUS_RISING_IRQ]); 473 474 return 0; 475 } 476 477 static SIMPLE_DEV_PM_OPS(axp288_extcon_pm_ops, axp288_extcon_suspend, 478 axp288_extcon_resume); 479 480 static const struct platform_device_id axp288_extcon_table[] = { 481 { .name = "axp288_extcon" }, 482 {}, 483 }; 484 MODULE_DEVICE_TABLE(platform, axp288_extcon_table); 485 486 static struct platform_driver axp288_extcon_driver = { 487 .probe = axp288_extcon_probe, 488 .id_table = axp288_extcon_table, 489 .driver = { 490 .name = "axp288_extcon", 491 .pm = &axp288_extcon_pm_ops, 492 }, 493 }; 494 495 static int __init axp288_extcon_init(void) 496 { 497 return platform_driver_register(&axp288_extcon_driver); 498 } 499 module_init(axp288_extcon_init); 500 501 static void __exit axp288_extcon_exit(void) 502 { 503 platform_driver_unregister(&axp288_extcon_driver); 504 } 505 module_exit(axp288_extcon_exit); 506 507 MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>"); 508 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 509 MODULE_DESCRIPTION("X-Powers AXP288 extcon driver"); 510 MODULE_LICENSE("GPL v2"); 511