1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig EXTCON 3 tristate "External Connector Class (extcon) support" 4 help 5 Say Y here to enable external connector class (extcon) support. 6 This allows monitoring external connectors by userspace 7 via sysfs and uevent and supports external connectors with 8 multiple states; i.e., an extcon that may have multiple 9 cables attached. For example, an external connector of a device 10 may be used to connect an HDMI cable and a AC adaptor, and to 11 host USB ports. Many of 30-pin connectors including PDMI are 12 also good examples. 13 14if EXTCON 15 16comment "Extcon Device Drivers" 17 18config EXTCON_ADC_JACK 19 tristate "ADC Jack extcon support" 20 depends on IIO 21 help 22 Say Y here to enable extcon device driver based on ADC values. 23 24config EXTCON_AXP288 25 tristate "X-Power AXP288 EXTCON support" 26 depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI && IOSF_MBI 27 select USB_ROLE_SWITCH 28 help 29 Say Y here to enable support for USB peripheral detection 30 and USB MUX switching by X-Power AXP288 PMIC. 31 32config EXTCON_FSA9480 33 tristate "FSA9480 EXTCON Support" 34 depends on INPUT && I2C 35 select IRQ_DOMAIN 36 select REGMAP_I2C 37 help 38 If you say yes here you get support for the Fairchild Semiconductor 39 FSA9480 microUSB switch and accessory detector chip. The FSA9480 is a USB 40 port accessory detector and switch. The FSA9480 is fully controlled using 41 I2C and enables USB data, stereo and mono audio, video, microphone 42 and UART data to use a common connector port. 43 44config EXTCON_GPIO 45 tristate "GPIO extcon support" 46 depends on GPIOLIB || COMPILE_TEST 47 help 48 Say Y here to enable GPIO based extcon support. Note that GPIO 49 extcon supports single state per extcon instance. 50 51config EXTCON_INTEL_INT3496 52 tristate "Intel INT3496 ACPI device extcon driver" 53 depends on GPIOLIB && ACPI && (X86 || COMPILE_TEST) 54 help 55 Say Y here to enable extcon support for USB OTG ports controlled by 56 an Intel INT3496 ACPI device. 57 58 This ACPI device is typically found on Intel Baytrail or Cherrytrail 59 based tablets, or other Baytrail / Cherrytrail devices. 60 61config EXTCON_INTEL_CHT_WC 62 tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver" 63 depends on INTEL_SOC_PMIC_CHTWC 64 help 65 Say Y here to enable extcon support for charger detection / control 66 on the Intel Cherrytrail Whiskey Cove PMIC. 67 68config EXTCON_INTEL_MRFLD 69 tristate "Intel Merrifield Basin Cove PMIC extcon driver" 70 depends on INTEL_SOC_PMIC_MRFLD 71 help 72 Say Y here to enable extcon support for charger detection / control 73 on the Intel Merrifield Basin Cove PMIC. 74 75config EXTCON_MAX14577 76 tristate "Maxim MAX14577/77836 EXTCON Support" 77 depends on MFD_MAX14577 78 select IRQ_DOMAIN 79 select REGMAP_I2C 80 help 81 If you say yes here you get support for the MUIC device of 82 Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory 83 detector and switch. 84 85config EXTCON_MAX3355 86 tristate "Maxim MAX3355 USB OTG EXTCON Support" 87 depends on GPIOLIB || COMPILE_TEST 88 help 89 If you say yes here you get support for the USB OTG role detection by 90 MAX3355. The MAX3355 chip integrates a charge pump and comparators to 91 enable a system with an integrated USB OTG dual-role transceiver to 92 function as an USB OTG dual-role device. 93 94config EXTCON_MAX77693 95 tristate "Maxim MAX77693 EXTCON Support" 96 depends on MFD_MAX77693 && INPUT 97 select IRQ_DOMAIN 98 select REGMAP_I2C 99 help 100 If you say yes here you get support for the MUIC device of 101 Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory 102 detector and switch. 103 104config EXTCON_MAX77843 105 tristate "Maxim MAX77843 EXTCON Support" 106 depends on MFD_MAX77843 107 select IRQ_DOMAIN 108 select REGMAP_I2C 109 help 110 If you say yes here you get support for the MUIC device of 111 Maxim MAX77843. The MAX77843 MUIC is a USB port accessory 112 detector add switch. 113 114config EXTCON_MAX8997 115 tristate "Maxim MAX8997 EXTCON Support" 116 depends on MFD_MAX8997 && IRQ_DOMAIN 117 help 118 If you say yes here you get support for the MUIC device of 119 Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory 120 detector and switch. 121 122config EXTCON_PALMAS 123 tristate "Palmas USB EXTCON support" 124 depends on MFD_PALMAS 125 help 126 Say Y here to enable support for USB peripheral and USB host 127 detection by palmas usb. 128 129config EXTCON_PTN5150 130 tristate "NXP PTN5150 CC LOGIC USB EXTCON support" 131 depends on I2C && (GPIOLIB || COMPILE_TEST) 132 select REGMAP_I2C 133 help 134 Say Y here to enable support for USB peripheral and USB host 135 detection by NXP PTN5150 CC (Configuration Channel) logic chip. 136 137config EXTCON_QCOM_SPMI_MISC 138 tristate "Qualcomm USB extcon support" 139 depends on ARCH_QCOM || COMPILE_TEST 140 help 141 Say Y here to enable SPMI PMIC based USB cable detection 142 support on Qualcomm PMICs such as PM8941. 143 144config EXTCON_RT8973A 145 tristate "Richtek RT8973A EXTCON support" 146 depends on I2C 147 select IRQ_DOMAIN 148 select REGMAP_I2C 149 select REGMAP_IRQ 150 help 151 If you say yes here you get support for the MUIC device of 152 Richtek RT8973A. The RT8973A is a USB port accessory detector 153 and switch that is optimized to protect low voltage system 154 from abnormal high input voltage (up to 28V). 155 156config EXTCON_SM5502 157 tristate "Silicon Mitus SM5502/SM5504 EXTCON support" 158 depends on I2C 159 select IRQ_DOMAIN 160 select REGMAP_I2C 161 select REGMAP_IRQ 162 help 163 If you say yes here you get support for the MUIC device of 164 Silicon Mitus SM5502. The SM5502 is a USB port accessory 165 detector and switch. 166 167config EXTCON_USB_GPIO 168 tristate "USB GPIO extcon support" 169 depends on GPIOLIB || COMPILE_TEST 170 help 171 Say Y here to enable GPIO based USB cable detection extcon support. 172 Used typically if GPIO is used for USB ID pin detection. 173 174config EXTCON_USBC_CROS_EC 175 tristate "ChromeOS Embedded Controller EXTCON support" 176 depends on CROS_EC 177 help 178 Say Y here to enable USB Type C cable detection extcon support when 179 using Chrome OS EC based USB Type-C ports. 180 181config EXTCON_USBC_TUSB320 182 tristate "TI TUSB320 USB-C extcon support" 183 depends on I2C 184 select REGMAP_I2C 185 help 186 Say Y here to enable support for USB Type C cable detection extcon 187 support using a TUSB320. 188 189endif 190