xref: /openbmc/linux/drivers/extcon/Kconfig (revision e8614313) 
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig EXTCON
3	tristate "External Connector Class (extcon) support"
4	help
5	  Say Y here to enable external connector class (extcon) support.
6	  This allows monitoring external connectors by userspace
7	  via sysfs and uevent and supports external connectors with
8	  multiple states; i.e., an extcon that may have multiple
9	  cables attached. For example, an external connector of a device
10	  may be used to connect an HDMI cable and a AC adaptor, and to
11	  host USB ports. Many of 30-pin connectors including PDMI are
12	  also good examples.
13
14if EXTCON
15
16comment "Extcon Device Drivers"
17
18config EXTCON_ADC_JACK
19	tristate "ADC Jack extcon support"
20	depends on IIO
21	help
22	  Say Y here to enable extcon device driver based on ADC values.
23
24config EXTCON_AXP288
25	tristate "X-Power AXP288 EXTCON support"
26	depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI
27	select USB_ROLE_SWITCH
28	help
29	  Say Y here to enable support for USB peripheral detection
30	  and USB MUX switching by X-Power AXP288 PMIC.
31
32config EXTCON_FSA9480
33	tristate "FSA9480 EXTCON Support"
34	depends on INPUT && I2C
35	select IRQ_DOMAIN
36	select REGMAP_I2C
37	help
38	  If you say yes here you get support for the Fairchild Semiconductor
39	  FSA9480 microUSB switch and accessory detector chip. The FSA9480 is a USB
40	  port accessory detector and switch. The FSA9480 is fully controlled using
41	  I2C and enables USB data, stereo and mono audio, video, microphone
42	  and UART data to use a common connector port.
43
44config EXTCON_GPIO
45	tristate "GPIO extcon support"
46	depends on GPIOLIB || COMPILE_TEST
47	help
48	  Say Y here to enable GPIO based extcon support. Note that GPIO
49	  extcon supports single state per extcon instance.
50
51config EXTCON_INTEL_INT3496
52	tristate "Intel INT3496 ACPI device extcon driver"
53	depends on GPIOLIB && ACPI && (X86 || COMPILE_TEST)
54	help
55	  Say Y here to enable extcon support for USB OTG ports controlled by
56	  an Intel INT3496 ACPI device.
57
58	  This ACPI device is typically found on Intel Baytrail or Cherrytrail
59	  based tablets, or other Baytrail / Cherrytrail devices.
60
61config EXTCON_INTEL_CHT_WC
62	tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver"
63	depends on INTEL_SOC_PMIC_CHTWC
64	help
65	  Say Y here to enable extcon support for charger detection / control
66	  on the Intel Cherrytrail Whiskey Cove PMIC.
67
68config EXTCON_INTEL_MRFLD
69	tristate "Intel Merrifield Basin Cove PMIC extcon driver"
70	depends on INTEL_SOC_PMIC_MRFLD
71	help
72	  Say Y here to enable extcon support for charger detection / control
73	  on the Intel Merrifield Basin Cove PMIC.
74
75config EXTCON_MAX14577
76	tristate "Maxim MAX14577/77836 EXTCON Support"
77	depends on MFD_MAX14577
78	select IRQ_DOMAIN
79	select REGMAP_I2C
80	help
81	  If you say yes here you get support for the MUIC device of
82	  Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory
83	  detector and switch.
84
85config EXTCON_MAX3355
86	tristate "Maxim MAX3355 USB OTG EXTCON Support"
87	depends on GPIOLIB || COMPILE_TEST
88	help
89	  If you say yes here you get support for the USB OTG role detection by
90	  MAX3355. The MAX3355 chip integrates a charge pump and comparators to
91	  enable a system with an integrated USB OTG dual-role transceiver to
92	  function as an USB OTG dual-role device.
93
94config EXTCON_MAX77693
95	tristate "Maxim MAX77693 EXTCON Support"
96	depends on MFD_MAX77693 && INPUT
97	select IRQ_DOMAIN
98	select REGMAP_I2C
99	help
100	  If you say yes here you get support for the MUIC device of
101	  Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
102	  detector and switch.
103
104config EXTCON_MAX77843
105	tristate "Maxim MAX77843 EXTCON Support"
106	depends on MFD_MAX77843
107	select IRQ_DOMAIN
108	select REGMAP_I2C
109	help
110	  If you say yes here you get support for the MUIC device of
111	  Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
112	  detector add switch.
113
114config EXTCON_MAX8997
115	tristate "Maxim MAX8997 EXTCON Support"
116	depends on MFD_MAX8997 && IRQ_DOMAIN
117	help
118	  If you say yes here you get support for the MUIC device of
119	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
120	  detector and switch.
121
122config EXTCON_PALMAS
123	tristate "Palmas USB EXTCON support"
124	depends on MFD_PALMAS
125	help
126	  Say Y here to enable support for USB peripheral and USB host
127	  detection by palmas usb.
128
129config EXTCON_PTN5150
130	tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
131	depends on I2C && (GPIOLIB || COMPILE_TEST)
132	select REGMAP_I2C
133	help
134	  Say Y here to enable support for USB peripheral and USB host
135	  detection by NXP PTN5150 CC (Configuration Channel) logic chip.
136
137config EXTCON_QCOM_SPMI_MISC
138	tristate "Qualcomm USB extcon support"
139	depends on ARCH_QCOM || COMPILE_TEST
140	help
141	  Say Y here to enable SPMI PMIC based USB cable detection
142	  support on Qualcomm PMICs such as PM8941.
143
144config EXTCON_RT8973A
145	tristate "Richtek RT8973A EXTCON support"
146	depends on I2C
147	select IRQ_DOMAIN
148	select REGMAP_I2C
149	select REGMAP_IRQ
150	help
151	  If you say yes here you get support for the MUIC device of
152	  Richtek RT8973A. The RT8973A is a USB port accessory detector
153	  and switch that is optimized to protect low voltage system
154	  from abnormal high input voltage (up to 28V).
155
156config EXTCON_SM5502
157	tristate "Silicon Mitus SM5502 EXTCON support"
158	depends on I2C
159	select IRQ_DOMAIN
160	select REGMAP_I2C
161	select REGMAP_IRQ
162	help
163	  If you say yes here you get support for the MUIC device of
164	  Silicon Mitus SM5502. The SM5502 is a USB port accessory
165	  detector and switch.
166
167config EXTCON_USB_GPIO
168	tristate "USB GPIO extcon support"
169	depends on GPIOLIB || COMPILE_TEST
170	help
171	  Say Y here to enable GPIO based USB cable detection extcon support.
172	  Used typically if GPIO is used for USB ID pin detection.
173
174config EXTCON_USBC_CROS_EC
175	tristate "ChromeOS Embedded Controller EXTCON support"
176	depends on CROS_EC
177	help
178	  Say Y here to enable USB Type C cable detection extcon support when
179	  using Chrome OS EC based USB Type-C ports.
180
181config EXTCON_USBC_TUSB320
182	tristate "TI TUSB320 USB-C extcon support"
183	depends on I2C
184	select REGMAP_I2C
185	help
186	  Say Y here to enable support for USB Type C cable detection extcon
187	  support using a TUSB320.
188
189endif
190