1menuconfig EXTCON 2 tristate "External Connector Class (extcon) support" 3 help 4 Say Y here to enable external connector class (extcon) support. 5 This allows monitoring external connectors by userspace 6 via sysfs and uevent and supports external connectors with 7 multiple states; i.e., an extcon that may have multiple 8 cables attached. For example, an external connector of a device 9 may be used to connect an HDMI cable and a AC adaptor, and to 10 host USB ports. Many of 30-pin connectors including PDMI are 11 also good examples. 12 13if EXTCON 14 15comment "Extcon Device Drivers" 16 17config EXTCON_ADC_JACK 18 tristate "ADC Jack extcon support" 19 depends on IIO 20 help 21 Say Y here to enable extcon device driver based on ADC values. 22 23config EXTCON_ARIZONA 24 tristate "Wolfson Arizona EXTCON support" 25 depends on MFD_ARIZONA && INPUT && SND_SOC 26 help 27 Say Y here to enable support for external accessory detection 28 with Wolfson Arizona devices. These are audio CODECs with 29 advanced audio accessory detection support. 30 31config EXTCON_AXP288 32 tristate "X-Power AXP288 EXTCON support" 33 depends on MFD_AXP20X && USB_PHY 34 help 35 Say Y here to enable support for USB peripheral detection 36 and USB MUX switching by X-Power AXP288 PMIC. 37 38config EXTCON_GPIO 39 tristate "GPIO extcon support" 40 depends on GPIOLIB || COMPILE_TEST 41 help 42 Say Y here to enable GPIO based extcon support. Note that GPIO 43 extcon supports single state per extcon instance. 44 45config EXTCON_MAX14577 46 tristate "Maxim MAX14577/77836 EXTCON Support" 47 depends on MFD_MAX14577 48 select IRQ_DOMAIN 49 select REGMAP_I2C 50 help 51 If you say yes here you get support for the MUIC device of 52 Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory 53 detector and switch. 54 55config EXTCON_MAX3355 56 tristate "Maxim MAX3355 USB OTG EXTCON Support" 57 depends on GPIOLIB || COMPILE_TEST 58 help 59 If you say yes here you get support for the USB OTG role detection by 60 MAX3355. The MAX3355 chip integrates a charge pump and comparators to 61 enable a system with an integrated USB OTG dual-role transceiver to 62 function as an USB OTG dual-role device. 63 64config EXTCON_MAX77693 65 tristate "Maxim MAX77693 EXTCON Support" 66 depends on MFD_MAX77693 && INPUT 67 select IRQ_DOMAIN 68 select REGMAP_I2C 69 help 70 If you say yes here you get support for the MUIC device of 71 Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory 72 detector and switch. 73 74config EXTCON_MAX77843 75 tristate "Maxim MAX77843 EXTCON Support" 76 depends on MFD_MAX77843 77 select IRQ_DOMAIN 78 select REGMAP_I2C 79 help 80 If you say yes here you get support for the MUIC device of 81 Maxim MAX77843. The MAX77843 MUIC is a USB port accessory 82 detector add switch. 83 84config EXTCON_MAX8997 85 tristate "Maxim MAX8997 EXTCON Support" 86 depends on MFD_MAX8997 && IRQ_DOMAIN 87 help 88 If you say yes here you get support for the MUIC device of 89 Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory 90 detector and switch. 91 92config EXTCON_PALMAS 93 tristate "Palmas USB EXTCON support" 94 depends on MFD_PALMAS 95 help 96 Say Y here to enable support for USB peripheral and USB host 97 detection by palmas usb. 98 99config EXTCON_RT8973A 100 tristate "Richtek RT8973A EXTCON support" 101 depends on I2C 102 select IRQ_DOMAIN 103 select REGMAP_I2C 104 select REGMAP_IRQ 105 help 106 If you say yes here you get support for the MUIC device of 107 Richtek RT8973A. The RT8973A is a USB port accessory detector 108 and switch that is optimized to protect low voltage system 109 from abnormal high input voltage (up to 28V). 110 111config EXTCON_SM5502 112 tristate "Silicon Mitus SM5502 EXTCON support" 113 depends on I2C 114 select IRQ_DOMAIN 115 select REGMAP_I2C 116 select REGMAP_IRQ 117 help 118 If you say yes here you get support for the MUIC device of 119 Silicon Mitus SM5502. The SM5502 is a USB port accessory 120 detector and switch. 121 122config EXTCON_USB_GPIO 123 tristate "USB GPIO extcon support" 124 depends on GPIOLIB || COMPILE_TEST 125 help 126 Say Y here to enable GPIO based USB cable detection extcon support. 127 Used typically if GPIO is used for USB ID pin detection. 128 129endif 130