xref: /openbmc/linux/drivers/edac/synopsys_edac.c (revision 4f6cce39) 
1 /*
2  * Synopsys DDR ECC Driver
3  * This driver is based on ppc4xx_edac.c drivers
4  *
5  * Copyright (C) 2012 - 2014 Xilinx, Inc.
6  *
7  * This program is free software: you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation, either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * This file is subject to the terms and conditions of the GNU General Public
18  * License.  See the file "COPYING" in the main directory of this archive
19  * for more details
20  */
21 
22 #include <linux/edac.h>
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25 
26 #include "edac_module.h"
27 
28 /* Number of cs_rows needed per memory controller */
29 #define SYNPS_EDAC_NR_CSROWS	1
30 
31 /* Number of channels per memory controller */
32 #define SYNPS_EDAC_NR_CHANS	1
33 
34 /* Granularity of reported error in bytes */
35 #define SYNPS_EDAC_ERR_GRAIN	1
36 
37 #define SYNPS_EDAC_MSG_SIZE	256
38 
39 #define SYNPS_EDAC_MOD_STRING	"synps_edac"
40 #define SYNPS_EDAC_MOD_VER	"1"
41 
42 /* Synopsys DDR memory controller registers that are relevant to ECC */
43 #define CTRL_OFST		0x0
44 #define T_ZQ_OFST		0xA4
45 
46 /* ECC control register */
47 #define ECC_CTRL_OFST		0xC4
48 /* ECC log register */
49 #define CE_LOG_OFST		0xC8
50 /* ECC address register */
51 #define CE_ADDR_OFST		0xCC
52 /* ECC data[31:0] register */
53 #define CE_DATA_31_0_OFST	0xD0
54 
55 /* Uncorrectable error info registers */
56 #define UE_LOG_OFST		0xDC
57 #define UE_ADDR_OFST		0xE0
58 #define UE_DATA_31_0_OFST	0xE4
59 
60 #define STAT_OFST		0xF0
61 #define SCRUB_OFST		0xF4
62 
63 /* Control register bit field definitions */
64 #define CTRL_BW_MASK		0xC
65 #define CTRL_BW_SHIFT		2
66 
67 #define DDRCTL_WDTH_16		1
68 #define DDRCTL_WDTH_32		0
69 
70 /* ZQ register bit field definitions */
71 #define T_ZQ_DDRMODE_MASK	0x2
72 
73 /* ECC control register bit field definitions */
74 #define ECC_CTRL_CLR_CE_ERR	0x2
75 #define ECC_CTRL_CLR_UE_ERR	0x1
76 
77 /* ECC correctable/uncorrectable error log register definitions */
78 #define LOG_VALID		0x1
79 #define CE_LOG_BITPOS_MASK	0xFE
80 #define CE_LOG_BITPOS_SHIFT	1
81 
82 /* ECC correctable/uncorrectable error address register definitions */
83 #define ADDR_COL_MASK		0xFFF
84 #define ADDR_ROW_MASK		0xFFFF000
85 #define ADDR_ROW_SHIFT		12
86 #define ADDR_BANK_MASK		0x70000000
87 #define ADDR_BANK_SHIFT		28
88 
89 /* ECC statistic register definitions */
90 #define STAT_UECNT_MASK		0xFF
91 #define STAT_CECNT_MASK		0xFF00
92 #define STAT_CECNT_SHIFT	8
93 
94 /* ECC scrub register definitions */
95 #define SCRUB_MODE_MASK		0x7
96 #define SCRUB_MODE_SECDED	0x4
97 
98 /**
99  * struct ecc_error_info - ECC error log information
100  * @row:	Row number
101  * @col:	Column number
102  * @bank:	Bank number
103  * @bitpos:	Bit position
104  * @data:	Data causing the error
105  */
106 struct ecc_error_info {
107 	u32 row;
108 	u32 col;
109 	u32 bank;
110 	u32 bitpos;
111 	u32 data;
112 };
113 
114 /**
115  * struct synps_ecc_status - ECC status information to report
116  * @ce_cnt:	Correctable error count
117  * @ue_cnt:	Uncorrectable error count
118  * @ceinfo:	Correctable error log information
119  * @ueinfo:	Uncorrectable error log information
120  */
121 struct synps_ecc_status {
122 	u32 ce_cnt;
123 	u32 ue_cnt;
124 	struct ecc_error_info ceinfo;
125 	struct ecc_error_info ueinfo;
126 };
127 
128 /**
129  * struct synps_edac_priv - DDR memory controller private instance data
130  * @baseaddr:	Base address of the DDR controller
131  * @message:	Buffer for framing the event specific info
132  * @stat:	ECC status information
133  * @ce_cnt:	Correctable Error count
134  * @ue_cnt:	Uncorrectable Error count
135  */
136 struct synps_edac_priv {
137 	void __iomem *baseaddr;
138 	char message[SYNPS_EDAC_MSG_SIZE];
139 	struct synps_ecc_status stat;
140 	u32 ce_cnt;
141 	u32 ue_cnt;
142 };
143 
144 /**
145  * synps_edac_geterror_info - Get the current ecc error info
146  * @base:	Pointer to the base address of the ddr memory controller
147  * @p:		Pointer to the synopsys ecc status structure
148  *
149  * Determines there is any ecc error or not
150  *
151  * Return: one if there is no error otherwise returns zero
152  */
153 static int synps_edac_geterror_info(void __iomem *base,
154 				    struct synps_ecc_status *p)
155 {
156 	u32 regval, clearval = 0;
157 
158 	regval = readl(base + STAT_OFST);
159 	if (!regval)
160 		return 1;
161 
162 	p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT;
163 	p->ue_cnt = regval & STAT_UECNT_MASK;
164 
165 	regval = readl(base + CE_LOG_OFST);
166 	if (!(p->ce_cnt && (regval & LOG_VALID)))
167 		goto ue_err;
168 
169 	p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT;
170 	regval = readl(base + CE_ADDR_OFST);
171 	p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
172 	p->ceinfo.col = regval & ADDR_COL_MASK;
173 	p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
174 	p->ceinfo.data = readl(base + CE_DATA_31_0_OFST);
175 	edac_dbg(3, "ce bit position: %d data: %d\n", p->ceinfo.bitpos,
176 		 p->ceinfo.data);
177 	clearval = ECC_CTRL_CLR_CE_ERR;
178 
179 ue_err:
180 	regval = readl(base + UE_LOG_OFST);
181 	if (!(p->ue_cnt && (regval & LOG_VALID)))
182 		goto out;
183 
184 	regval = readl(base + UE_ADDR_OFST);
185 	p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
186 	p->ueinfo.col = regval & ADDR_COL_MASK;
187 	p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
188 	p->ueinfo.data = readl(base + UE_DATA_31_0_OFST);
189 	clearval |= ECC_CTRL_CLR_UE_ERR;
190 
191 out:
192 	writel(clearval, base + ECC_CTRL_OFST);
193 	writel(0x0, base + ECC_CTRL_OFST);
194 
195 	return 0;
196 }
197 
198 /**
199  * synps_edac_handle_error - Handle controller error types CE and UE
200  * @mci:	Pointer to the edac memory controller instance
201  * @p:		Pointer to the synopsys ecc status structure
202  *
203  * Handles the controller ECC correctable and un correctable error.
204  */
205 static void synps_edac_handle_error(struct mem_ctl_info *mci,
206 				    struct synps_ecc_status *p)
207 {
208 	struct synps_edac_priv *priv = mci->pvt_info;
209 	struct ecc_error_info *pinf;
210 
211 	if (p->ce_cnt) {
212 		pinf = &p->ceinfo;
213 		snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
214 			 "DDR ECC error type :%s Row %d Bank %d Col %d ",
215 			 "CE", pinf->row, pinf->bank, pinf->col);
216 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
217 				     p->ce_cnt, 0, 0, 0, 0, 0, -1,
218 				     priv->message, "");
219 	}
220 
221 	if (p->ue_cnt) {
222 		pinf = &p->ueinfo;
223 		snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
224 			 "DDR ECC error type :%s Row %d Bank %d Col %d ",
225 			 "UE", pinf->row, pinf->bank, pinf->col);
226 		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
227 				     p->ue_cnt, 0, 0, 0, 0, 0, -1,
228 				     priv->message, "");
229 	}
230 
231 	memset(p, 0, sizeof(*p));
232 }
233 
234 /**
235  * synps_edac_check - Check controller for ECC errors
236  * @mci:	Pointer to the edac memory controller instance
237  *
238  * Used to check and post ECC errors. Called by the polling thread
239  */
240 static void synps_edac_check(struct mem_ctl_info *mci)
241 {
242 	struct synps_edac_priv *priv = mci->pvt_info;
243 	int status;
244 
245 	status = synps_edac_geterror_info(priv->baseaddr, &priv->stat);
246 	if (status)
247 		return;
248 
249 	priv->ce_cnt += priv->stat.ce_cnt;
250 	priv->ue_cnt += priv->stat.ue_cnt;
251 	synps_edac_handle_error(mci, &priv->stat);
252 
253 	edac_dbg(3, "Total error count ce %d ue %d\n",
254 		 priv->ce_cnt, priv->ue_cnt);
255 }
256 
257 /**
258  * synps_edac_get_dtype - Return the controller memory width
259  * @base:	Pointer to the ddr memory controller base address
260  *
261  * Get the EDAC device type width appropriate for the current controller
262  * configuration.
263  *
264  * Return: a device type width enumeration.
265  */
266 static enum dev_type synps_edac_get_dtype(const void __iomem *base)
267 {
268 	enum dev_type dt;
269 	u32 width;
270 
271 	width = readl(base + CTRL_OFST);
272 	width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
273 
274 	switch (width) {
275 	case DDRCTL_WDTH_16:
276 		dt = DEV_X2;
277 		break;
278 	case DDRCTL_WDTH_32:
279 		dt = DEV_X4;
280 		break;
281 	default:
282 		dt = DEV_UNKNOWN;
283 	}
284 
285 	return dt;
286 }
287 
288 /**
289  * synps_edac_get_eccstate - Return the controller ecc enable/disable status
290  * @base:	Pointer to the ddr memory controller base address
291  *
292  * Get the ECC enable/disable status for the controller
293  *
294  * Return: a ecc status boolean i.e true/false - enabled/disabled.
295  */
296 static bool synps_edac_get_eccstate(void __iomem *base)
297 {
298 	enum dev_type dt;
299 	u32 ecctype;
300 	bool state = false;
301 
302 	dt = synps_edac_get_dtype(base);
303 	if (dt == DEV_UNKNOWN)
304 		return state;
305 
306 	ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK;
307 	if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2))
308 		state = true;
309 
310 	return state;
311 }
312 
313 /**
314  * synps_edac_get_memsize - reads the size of the attached memory device
315  *
316  * Return: the memory size in bytes
317  */
318 static u32 synps_edac_get_memsize(void)
319 {
320 	struct sysinfo inf;
321 
322 	si_meminfo(&inf);
323 
324 	return inf.totalram * inf.mem_unit;
325 }
326 
327 /**
328  * synps_edac_get_mtype - Returns controller memory type
329  * @base:	pointer to the synopsys ecc status structure
330  *
331  * Get the EDAC memory type appropriate for the current controller
332  * configuration.
333  *
334  * Return: a memory type enumeration.
335  */
336 static enum mem_type synps_edac_get_mtype(const void __iomem *base)
337 {
338 	enum mem_type mt;
339 	u32 memtype;
340 
341 	memtype = readl(base + T_ZQ_OFST);
342 
343 	if (memtype & T_ZQ_DDRMODE_MASK)
344 		mt = MEM_DDR3;
345 	else
346 		mt = MEM_DDR2;
347 
348 	return mt;
349 }
350 
351 /**
352  * synps_edac_init_csrows - Initialize the cs row data
353  * @mci:	Pointer to the edac memory controller instance
354  *
355  * Initializes the chip select rows associated with the EDAC memory
356  * controller instance
357  *
358  * Return: Unconditionally 0.
359  */
360 static int synps_edac_init_csrows(struct mem_ctl_info *mci)
361 {
362 	struct csrow_info *csi;
363 	struct dimm_info *dimm;
364 	struct synps_edac_priv *priv = mci->pvt_info;
365 	u32 size;
366 	int row, j;
367 
368 	for (row = 0; row < mci->nr_csrows; row++) {
369 		csi = mci->csrows[row];
370 		size = synps_edac_get_memsize();
371 
372 		for (j = 0; j < csi->nr_channels; j++) {
373 			dimm            = csi->channels[j]->dimm;
374 			dimm->edac_mode = EDAC_FLAG_SECDED;
375 			dimm->mtype     = synps_edac_get_mtype(priv->baseaddr);
376 			dimm->nr_pages  = (size >> PAGE_SHIFT) / csi->nr_channels;
377 			dimm->grain     = SYNPS_EDAC_ERR_GRAIN;
378 			dimm->dtype     = synps_edac_get_dtype(priv->baseaddr);
379 		}
380 	}
381 
382 	return 0;
383 }
384 
385 /**
386  * synps_edac_mc_init - Initialize driver instance
387  * @mci:	Pointer to the edac memory controller instance
388  * @pdev:	Pointer to the platform_device struct
389  *
390  * Performs initialization of the EDAC memory controller instance and
391  * related driver-private data associated with the memory controller the
392  * instance is bound to.
393  *
394  * Return: Always zero.
395  */
396 static int synps_edac_mc_init(struct mem_ctl_info *mci,
397 				 struct platform_device *pdev)
398 {
399 	int status;
400 	struct synps_edac_priv *priv;
401 
402 	mci->pdev = &pdev->dev;
403 	priv = mci->pvt_info;
404 	platform_set_drvdata(pdev, mci);
405 
406 	/* Initialize controller capabilities and configuration */
407 	mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
408 	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
409 	mci->scrub_cap = SCRUB_HW_SRC;
410 	mci->scrub_mode = SCRUB_NONE;
411 
412 	mci->edac_cap = EDAC_FLAG_SECDED;
413 	mci->ctl_name = "synps_ddr_controller";
414 	mci->dev_name = SYNPS_EDAC_MOD_STRING;
415 	mci->mod_name = SYNPS_EDAC_MOD_VER;
416 	mci->mod_ver = "1";
417 
418 	edac_op_state = EDAC_OPSTATE_POLL;
419 	mci->edac_check = synps_edac_check;
420 	mci->ctl_page_to_phys = NULL;
421 
422 	status = synps_edac_init_csrows(mci);
423 
424 	return status;
425 }
426 
427 /**
428  * synps_edac_mc_probe - Check controller and bind driver
429  * @pdev:	Pointer to the platform_device struct
430  *
431  * Probes a specific controller instance for binding with the driver.
432  *
433  * Return: 0 if the controller instance was successfully bound to the
434  * driver; otherwise, < 0 on error.
435  */
436 static int synps_edac_mc_probe(struct platform_device *pdev)
437 {
438 	struct mem_ctl_info *mci;
439 	struct edac_mc_layer layers[2];
440 	struct synps_edac_priv *priv;
441 	int rc;
442 	struct resource *res;
443 	void __iomem *baseaddr;
444 
445 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
446 	baseaddr = devm_ioremap_resource(&pdev->dev, res);
447 	if (IS_ERR(baseaddr))
448 		return PTR_ERR(baseaddr);
449 
450 	if (!synps_edac_get_eccstate(baseaddr)) {
451 		edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
452 		return -ENXIO;
453 	}
454 
455 	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
456 	layers[0].size = SYNPS_EDAC_NR_CSROWS;
457 	layers[0].is_virt_csrow = true;
458 	layers[1].type = EDAC_MC_LAYER_CHANNEL;
459 	layers[1].size = SYNPS_EDAC_NR_CHANS;
460 	layers[1].is_virt_csrow = false;
461 
462 	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
463 			    sizeof(struct synps_edac_priv));
464 	if (!mci) {
465 		edac_printk(KERN_ERR, EDAC_MC,
466 			    "Failed memory allocation for mc instance\n");
467 		return -ENOMEM;
468 	}
469 
470 	priv = mci->pvt_info;
471 	priv->baseaddr = baseaddr;
472 	rc = synps_edac_mc_init(mci, pdev);
473 	if (rc) {
474 		edac_printk(KERN_ERR, EDAC_MC,
475 			    "Failed to initialize instance\n");
476 		goto free_edac_mc;
477 	}
478 
479 	rc = edac_mc_add_mc(mci);
480 	if (rc) {
481 		edac_printk(KERN_ERR, EDAC_MC,
482 			    "Failed to register with EDAC core\n");
483 		goto free_edac_mc;
484 	}
485 
486 	/*
487 	 * Start capturing the correctable and uncorrectable errors. A write of
488 	 * 0 starts the counters.
489 	 */
490 	writel(0x0, baseaddr + ECC_CTRL_OFST);
491 	return rc;
492 
493 free_edac_mc:
494 	edac_mc_free(mci);
495 
496 	return rc;
497 }
498 
499 /**
500  * synps_edac_mc_remove - Unbind driver from controller
501  * @pdev:	Pointer to the platform_device struct
502  *
503  * Return: Unconditionally 0
504  */
505 static int synps_edac_mc_remove(struct platform_device *pdev)
506 {
507 	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
508 
509 	edac_mc_del_mc(&pdev->dev);
510 	edac_mc_free(mci);
511 
512 	return 0;
513 }
514 
515 static const struct of_device_id synps_edac_match[] = {
516 	{ .compatible = "xlnx,zynq-ddrc-a05", },
517 	{ /* end of table */ }
518 };
519 
520 MODULE_DEVICE_TABLE(of, synps_edac_match);
521 
522 static struct platform_driver synps_edac_mc_driver = {
523 	.driver = {
524 		   .name = "synopsys-edac",
525 		   .of_match_table = synps_edac_match,
526 		   },
527 	.probe = synps_edac_mc_probe,
528 	.remove = synps_edac_mc_remove,
529 };
530 
531 module_platform_driver(synps_edac_mc_driver);
532 
533 MODULE_AUTHOR("Xilinx Inc");
534 MODULE_DESCRIPTION("Synopsys DDR ECC driver");
535 MODULE_LICENSE("GPL v2");
536